]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
authorWolfgang Grandegger <wg@grandegger.com>
Wed, 11 Feb 2009 17:38:20 +0000 (18:38 +0100)
committerAndy Fleming <afleming@freescale.com>
Tue, 17 Feb 2009 00:05:58 +0000 (18:05 -0600)
The TQM8548_AG module does not have the standard PCI/PCI-X interface
connected but just the PCI Express interface . So far it was not
possible to disable it without disabling the complete PCI interface
(CONFIG_PCI) including PCI Express.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
board/tqc/tqm85xx/tqm85xx.c
include/configs/TQM85xx.h

index c414344c8edf690b4f4ffe135373ea3fbc2f2034..e1e75b83abb67e571c9d017ff213035fea3aee1f 100644 (file)
@@ -540,9 +540,9 @@ static int first_free_busno;
 extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
 extern void fsl_pci_init(struct pci_controller *hose);
 
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
-#endif /* CONFIG_PCI || CONFIG_PCI1 */
+#endif /* CONFIG_PCI1 */
 
 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
@@ -551,7 +551,7 @@ static struct pci_controller pcie1_hose;
 static inline void init_pci1(void)
 {
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
        uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
        volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR;
        struct pci_controller *hose = &pci1_hose;
@@ -626,9 +626,9 @@ static inline void init_pci1(void)
        } else {
                puts ("PCI1:  disabled\n");
        }
-#else /* !(CONFIG_PCI || CONFIG_PCI1) */
+#else /* !CONFIG_PCI1 */
        gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
-#endif /* CONFIG_PCI || CONFIG_PCI1) */
+#endif /* CONFIG_PCI1 */
 }
 
 static inline void init_pcie1(void)
@@ -707,7 +707,7 @@ void ft_board_setup (void *blob, bd_t *bd)
 {
        ft_cpu_setup (blob, bd);
 
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
        ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
index f5831ebaffec72efd0091793541fd1d0838c0ba2..cca8255a302b9b6f98c78ad4ad92625e9946f06c 100644 (file)
 #define CONFIG_MPC85xx         1       /* MPC8540/60/55/41             */
 
 #define CONFIG_PCI
+#define CONFIG_PCI1                    /* PCI/PCI-X controller         */
+#ifdef CONFIG_TQM8548
+#define CONFIG_PCIE1                   /* PCI Express interface        */
+#endif
+
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code     */
 #define CONFIG_PCIX_CHECK              /* PCIX olny works at 66 MHz    */
-#ifdef CONFIG_TQM8548
-#define CONFIG_PCI1
-#define CONFIG_PCIE1
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata       */
-#endif
 
 #define CONFIG_TSEC_ENET               /* tsec ethernet support        */