It is true that unused functions are removed from the ELF image
by the compiler's garbage collection but relying on it too much
does not look nice.
Currently, the build is taking more than it should.
Refactor the makefiles to compile only files that are really needed.
CONFIG_SOC_INIT and CONFIG_DRAM_INIT are no longer needed by the
optimization.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
config CMD_PINMON
bool "Enable boot mode pins monitor command"
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y
help
The command "pinmon" shows the state of the boot mode pins.
The boot mode pins are latched when the system reset is deasserted
and determine which device the system should load a boot image from.
default y
help
The command "pinmon" shows the state of the boot mode pins.
The boot mode pins are latched when the system reset is deasserted
and determine which device the system should load a boot image from.
-config SOC_INIT
- bool
- default SPL_BUILD
-
-config DRAM_INIT
- bool
- default SPL_BUILD
-
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
depends on !SPL_BUILD
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
depends on !SPL_BUILD
choice
prompt "DDR3 Frequency select"
choice
prompt "DDR3 Frequency select"
config DDR_FREQ_1600
bool "DDR3 1600"
config DDR_FREQ_1600
bool "DDR3 1600"
# SPDX-License-Identifier: GPL-2.0+
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_SPL_BUILD) += lowlevel_init.o init_page_table.o
-obj-$(CONFIG_SPL_BUILD) += spl.o
+ifdef CONFIG_SPL_BUILD
+
+obj-y += lowlevel_init.o
+obj-y += init_page_table.o
+obj-y += spl.o
+obj-y += ddrphy_training.o
+
+else
-obj-y += timer.o
-obj-y += reset.o
-obj-y += cache_uniphier.o
-obj-y += dram_init.o
-obj-$(CONFIG_DRAM_INIT) += ddrphy_training.o
obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
obj-$(CONFIG_MISC_INIT_F) += print_misc_info.o
obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
obj-$(CONFIG_MISC_INIT_F) += print_misc_info.o
+obj-y += dram_init.o
+obj-y += board_common.o
obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
+obj-y += reset.o
+obj-y += cache_uniphier.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o
+endif
+
+obj-y += timer.o
+
obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o
obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o
obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o
obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o
# SPDX-License-Identifier: GPL-2.0+
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
-obj-y += boot-mode.o
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
- clkrst_init.o
+obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+ pll_spectrum.o umc_init.o ddrphy_init.o
+else
obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
+obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
+endif
+
+obj-y += boot-mode.o
# SPDX-License-Identifier: GPL-2.0+
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
-obj-y += boot-mode.o
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o
+obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+ pll_spectrum.o umc_init.o ddrphy_init.o
+else
obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
+obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
+endif
+
+obj-y += boot-mode.o
# SPDX-License-Identifier: GPL-2.0+
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
-obj-y += boot-mode.o
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
- clkrst_init.o
+obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+ pll_spectrum.o umc_init.o ddrphy_init.o
+else
obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
+obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
+endif
+
+obj-y += boot-mode.o