dm: gpio: vf610: Add GPIO driver support

Add GPIO driver support to Freescale VF610

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>

diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 9ec1a3cf9e3b1b337fc408deb861c9d585933ffa..c002530cf901dc0d7df9d164a1a782b033afbcb9 100644 (file)
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -92,3 +92,29 @@ void imx_iomux_set_gpr_register(int group, int start_bit,
        reg |= value << start_bit;
        writel(reg, base + group * 4);
 }
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+                               unsigned int direction)
+{
+       u32 reg;
+       /*
+        * Only on Vybrid the input/output buffer enable flags
+        * are part of the shared mux/conf register.
+        */
+       reg = readl(base + (gpio << 2));
+
+       if (direction)
+               reg |= 0x2;
+       else
+               reg &= ~0x2;
+
+       writel(reg, base + (gpio << 2));
+}
+
+void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
+{
+       *gpio_state = readl(base + (gpio << 2)) &
+               ((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
+}
+#endif

diff --git a/arch/arm/include/asm/arch-vf610/gpio.h b/arch/arm/include/asm/arch-vf610/gpio.h
new file mode 100644 (file)
index 0000000..622b8f0
--- /dev/null
+++ b/arch/arm/include/asm/arch-vf610/gpio.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_VF610_GPIO_H
+#define __ASM_ARCH_VF610_GPIO_H
+
+#define VYBRID_GPIO_COUNT              32
+#define VF610_GPIO_DIRECTION_IN        0x0
+#define VF610_GPIO_DIRECTION_OUT       0x1
+
+/* GPIO registers */
+struct vybrid_gpio_regs {
+       u32 gpio_pdor;
+       u32 gpio_psor;
+       u32 gpio_pcor;
+       u32 gpio_ptor;
+       u32 gpio_pdir;
+};
+
+struct vybrid_gpio_platdata {
+       unsigned int chip;
+       u32 base;
+       const char *port_name;
+};
+#endif /* __ASM_ARCH_VF610_GPIO_H */

diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 202198133cfbc560cdaf6e6ba46d54fc71ff2534..7df3b1e3921730c6f8f56b34f4019b2a2894d56a 100644 (file)
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -81,6 +81,11 @@
 #define VREG_DIG_BASE_ADDR     (AIPS0_BASE_ADDR + 0x0006D000)
 #define SRC_BASE_ADDR          (AIPS0_BASE_ADDR + 0x0006E000)
 #define CMU_BASE_ADDR          (AIPS0_BASE_ADDR + 0x0006F000)
+#define GPIO0_BASE_ADDR                (AIPS0_BASE_ADDR + 0x000FF000)
+#define GPIO1_BASE_ADDR                (AIPS0_BASE_ADDR + 0x000FF040)
+#define GPIO2_BASE_ADDR                (AIPS0_BASE_ADDR + 0x000FF080)
+#define GPIO3_BASE_ADDR                (AIPS0_BASE_ADDR + 0x000FF0C0)
+#define GPIO4_BASE_ADDR                (AIPS0_BASE_ADDR + 0x000FF100)
 
 /* AIPS 1 */
 #define OCOTP_BASE_ADDR                (AIPS1_BASE_ADDR + 0x00025000)

diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 9af5af71c60aa59add64f581eebbaa4613d366a7..abd6c824e050d5ada89fabc20d4e91b1d8ad5ab3 100644 (file)
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -194,6 +194,12 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
 */
 void imx_iomux_set_gpr_register(int group, int start_bit,
                                         int num_bits, int value);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+                               unsigned int direction);
+void imx_iomux_gpio_get_function(unsigned int gpio,
+                               u32 *gpio_state);
+#endif
 
 /* macros for declaring and using pinmux array */
 #if defined(CONFIG_SOC_MX6QDL)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0840a30fbae2439f9a77c7f8d4d8ceb2915c768b..0c43777cef9dacdeb5d878a3500d4de35450b2b8 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -35,3 +35,10 @@ config SANDBOX_GPIO_COUNT
          are specified using the device tree. But you can also have a number
          of 'anonymous' GPIOs that do not belong to any device or bank.
          Select a suitable value depending on your needs.
+
+config VYBRID_GPIO
+       bool "Vybrid GPIO driver"
+       depends on DM
+       default n
+       help
+         Say yes here to support Vybrid vf610 GPIOs.

diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 39945ed6aebb62bdd7c14e0ee50ff50b74b18811..b02dd4c5cef7b99178606e498256fe61647d4c7a 100644 (file)
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -46,3 +46,4 @@ obj-$(CONFIG_SUNXI_GPIO)      += sunxi_gpio.o
 obj-$(CONFIG_LPC32XX_GPIO)     += lpc32xx_gpio.o
 obj-$(CONFIG_STM32_GPIO)       += stm32_gpio.o
 obj-$(CONFIG_ZYNQ_GPIO)                += zynq_gpio.o
+obj-$(CONFIG_VYBRID_GPIO)      += vybrid_gpio.o

diff --git a/drivers/gpio/vybrid_gpio.c b/drivers/gpio/vybrid_gpio.c
new file mode 100644 (file)
index 0000000..6eaf0a9
--- /dev/null
+++ b/drivers/gpio/vybrid_gpio.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct vybrid_gpios {
+       unsigned int chip;
+       struct vybrid_gpio_regs *reg;
+};
+
+static int vybrid_gpio_direction_input(struct udevice *dev, unsigned gpio)
+{
+       const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+       gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+       imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_IN);
+
+       return 0;
+}
+
+static int vybrid_gpio_direction_output(struct udevice *dev, unsigned gpio,
+                                        int value)
+{
+       const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+       gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+       gpio_set_value(gpio, value);
+       imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_OUT);
+
+       return 0;
+}
+
+static int vybrid_gpio_get_value(struct udevice *dev, unsigned gpio)
+{
+       const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+       return ((readl(&gpios->reg->gpio_pdir) & (1 << gpio))) ? 1 : 0;
+}
+
+static int vybrid_gpio_set_value(struct udevice *dev, unsigned gpio,
+                                 int value)
+{
+       const struct vybrid_gpios *gpios = dev_get_priv(dev);
+       if (value)
+               writel((1 << gpio), &gpios->reg->gpio_psor);
+       else
+               writel((1 << gpio), &gpios->reg->gpio_pcor);
+
+       return 0;
+}
+
+static int vybrid_gpio_get_function(struct udevice *dev, unsigned gpio)
+{
+       const struct vybrid_gpios *gpios = dev_get_priv(dev);
+       u32 g_state = 0;
+
+       gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+
+       imx_iomux_gpio_get_function(gpio, &g_state);
+
+       if (((g_state & (0x07 << PAD_MUX_MODE_SHIFT)) >> PAD_MUX_MODE_SHIFT) > 0)
+               return GPIOF_FUNC;
+       if (g_state & PAD_CTL_OBE_ENABLE)
+               return GPIOF_OUTPUT;
+       if (g_state & PAD_CTL_IBE_ENABLE)
+               return GPIOF_INPUT;
+       if (!(g_state & PAD_CTL_OBE_IBE_ENABLE))
+               return GPIOF_UNUSED;
+
+       return GPIOF_UNKNOWN;
+}
+
+static const struct dm_gpio_ops gpio_vybrid_ops = {
+       .direction_input        = vybrid_gpio_direction_input,
+       .direction_output       = vybrid_gpio_direction_output,
+       .get_value              = vybrid_gpio_get_value,
+       .set_value              = vybrid_gpio_set_value,
+       .get_function           = vybrid_gpio_get_function,
+};
+
+static int vybrid_gpio_probe(struct udevice *dev)
+{
+       struct vybrid_gpios *gpios = dev_get_priv(dev);
+       struct vybrid_gpio_platdata *plat = dev_get_platdata(dev);
+       struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+       uc_priv->bank_name = plat->port_name;
+       uc_priv->gpio_count = VYBRID_GPIO_COUNT;
+       gpios->reg = (struct vybrid_gpio_regs *)plat->base;
+       gpios->chip = plat->chip;
+
+       return 0;
+}
+
+static int vybrid_gpio_bind(struct udevice *dev)
+{
+       struct vybrid_gpio_platdata *plat = dev->platdata;
+       fdt_addr_t base_addr;
+
+       if (plat)
+               return 0;
+
+       base_addr = dev_get_addr(dev);
+       if (base_addr == FDT_ADDR_T_NONE)
+               return -ENODEV;
+
+       /*
+       * TODO:
+       * When every board is converted to driver model and DT is
+       * supported, this can be done by auto-alloc feature, but
+       * not using calloc to alloc memory for platdata.
+       */
+       plat = calloc(1, sizeof(*plat));
+       if (!plat)
+               return -ENOMEM;
+
+       plat->base = base_addr;
+       plat->chip = dev->req_seq;
+       plat->port_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL);
+       dev->platdata = plat;
+
+       return 0;
+}
+
+#ifndef CONFIG_OF_CONTROL
+static const struct vybrid_gpio_platdata vybrid_gpio[] = {
+       {0, GPIO0_BASE_ADDR, "GPIO0 "},
+       {1, GPIO1_BASE_ADDR, "GPIO1 "},
+       {2, GPIO2_BASE_ADDR, "GPIO2 "},
+       {3, GPIO3_BASE_ADDR, "GPIO3 "},
+       {4, GPIO4_BASE_ADDR, "GPIO4 "},
+};
+
+U_BOOT_DEVICES(vybrid_gpio) = {
+       { "gpio_vybrid", &vybrid_gpio[0] },
+       { "gpio_vybrid", &vybrid_gpio[1] },
+       { "gpio_vybrid", &vybrid_gpio[2] },
+       { "gpio_vybrid", &vybrid_gpio[3] },
+       { "gpio_vybrid", &vybrid_gpio[4] },
+};
+#endif
+
+static const struct udevice_id vybrid_gpio_ids[] = {
+       { .compatible = "fsl,vf610-gpio" },
+       { }
+};
+
+U_BOOT_DRIVER(gpio_vybrid) = {
+       .name   = "gpio_vybrid",
+       .id     = UCLASS_GPIO,
+       .ops    = &gpio_vybrid_ops,
+       .probe  = vybrid_gpio_probe,
+       .priv_auto_alloc_size = sizeof(struct vybrid_gpios),
+       .of_match = vybrid_gpio_ids,
+       .bind   = vybrid_gpio_bind,
+};