return 0;
}
-
-/*
- * Program a UPM with the code supplied in the table.
- *
- * The 'dummy' variable is used to increment the MAD. 'dummy' is
- * supposed to be a pointer to the memory of the device being
- * programmed by the UPM. The data in the MDR is written into
- * memory and the MAD is incremented every time there's a write
- * to 'dummy'. Unfortunately, the current prototype for this
- * function doesn't allow for passing the address of this
- * device, and changing the prototype will break a number lots
- * of other code, so we need to use a round-about way of finding
- * the value for 'dummy'.
- *
- * The value can be extracted from the base address bits of the
- * Base Register (BR) associated with the specific UPM. To find
- * that BR, we need to scan all 8 BRs until we find the one that
- * has its MSEL bits matching the UPM we want. Once we know the
- * right BR, we can extract the base address bits from it.
- *
- * The MxMR and the BR and OR of the chosen bank should all be
- * configured before calling this function.
- *
- * Parameters:
- * upm: 0=UPMA, 1=UPMB, 2=UPMC
- * table: Pointer to an array of values to program
- * size: Number of elements in the array. Must be 64 or less.
- */
-void upmconfig (uint upm, uint *table, uint size)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile fsl_lbc_t *lbc = &immap->im_lbc;
- volatile uchar *dummy = NULL;
- const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
- volatile u32 *mxmr = &lbc->mamr + upm; /* ptr to mamr, mbmr, or mcmr */
- uint i;
-
- /* Find the address for the dummy write transaction */
- for (i = 0; i < 8; i++) {
- if ((get_lbc_br(i) & BR_MSEL) == msel) {
- dummy = (uchar *) (get_lbc_br(i) & BR_BA);
- break;
- }
- }
-
- if (!dummy) {
- printf("Error: %s() could not find matching BR\n", __FUNCTION__);
- hang();
- }
-
- /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
- *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
-
- for (i = 0; i < size; i++) {
- lbc->mdr = table[i];
- __asm__ __volatile__ ("sync");
- *dummy = 0; /* Write the value to memory and increment MAD */
- __asm__ __volatile__ ("sync");
- while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
- }
-
- /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
- *mxmr &= 0xCFFFFFC0;
-}
-
-
int
do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
}
#endif /* CONFIG_WATCHDOG */
-/*
- * Configures a UPM. The function requires the respective MxMR to be set
- * before calling this function. "size" is the number or entries, not a sizeof.
- */
-void upmconfig (uint upm, uint * table, uint size)
-{
- int i, mdr, mad, old_mad = 0;
- volatile u32 *mxmr;
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- volatile u8* dummy = NULL;
- int upmmask;
-
- switch (upm) {
- case UPMA:
- mxmr = &lbc->mamr;
- upmmask = BR_MS_UPMA;
- break;
- case UPMB:
- mxmr = &lbc->mbmr;
- upmmask = BR_MS_UPMB;
- break;
- case UPMC:
- mxmr = &lbc->mcmr;
- upmmask = BR_MS_UPMC;
- break;
- default:
- printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
- hang();
- }
-
- /* Find the address for the dummy write transaction */
- for (i = 0; i < 8; i++) {
- if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
- dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA);
- break;
- }
- }
-
- if (i == 8) {
- printf("Error: %s() could not find matching BR\n", __FUNCTION__);
- hang();
- }
-
- for (i = 0; i < size; i++) {
- /* 1 */
- out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
- /* 2 */
- out_be32(&lbc->mdr, table[i]);
- /* 3 */
- mdr = in_be32(&lbc->mdr);
- /* 4 */
- *(volatile u8 *)dummy = 0;
- /* 5 */
- do {
- mad = in_be32(mxmr) & MxMR_MAD_MSK;
- } while (mad <= old_mad && !(!mad && i == (size-1)));
- old_mad = mad;
- }
- out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
-}
-
/*
* Initializes on-chip MMC controllers.
* to override, implement board_mmc_init()
set_lbc_br(7, CONFIG_SYS_BR7_PRELIM);
#endif
}
+
+/*
+ * Configures a UPM. The function requires the respective MxMR to be set
+ * before calling this function. "size" is the number or entries, not a sizeof.
+ */
+void upmconfig(uint upm, uint *table, uint size)
+{
+ fsl_lbc_t *lbc = LBC_BASE_ADDR;
+ int i, mdr, mad, old_mad = 0;
+ u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK);
+ u32 msel = BR_UPMx_TO_MSEL(upm);
+ u32 *mxmr = &lbc->mamr + upm;
+ volatile u8 *dummy = NULL;
+
+ if (upm < UPMA || upm > UPMC) {
+ printf("Error: %s() Bad UPM index %d\n", __func__, upm);
+ hang();
+ }
+
+ /*
+ * Find the address for the dummy write - scan all of the BRs until we
+ * find one matching the UPM and extract the base address bits from it.
+ */
+ for (i = 0; i < 8; i++) {
+ if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) {
+ dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA);
+ break;
+ }
+ }
+
+ if (!dummy) {
+ printf("Error: %s() No matching BR\n", __func__);
+ hang();
+ }
+
+ /* Program UPM using steps outlined by the reference manual */
+ for (i = 0; i < size; i++) {
+ out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i);
+ out_be32(&lbc->mdr, table[i]);
+ mdr = in_be32(&lbc->mdr);
+ *dummy = 0;
+ do {
+ mad = in_be32(mxmr) & MxMR_MAD_MSK;
+ } while (mad <= old_mad && !(!mad && i == (size-1)));
+ old_mad = mad;
+ }
+
+ /* Return to normal operation */
+ out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM);
+}
#define BR_V 0x00000001
#define BR_V_SHIFT 0
+#define BR_UPMx_TO_MSEL(x) ((x + 4) << BR_MSEL_SHIFT)
+
#define UPMA 0
#define UPMB 1
#define UPMC 2
extern void print_lbc_regs(void);
extern void init_early_memctl_regs(void);
+extern void upmconfig(uint upm, uint *table, uint size);
#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR)
#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br))
projects / karo-tx-uboot.git / commitdiff