]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
sunxi: ohci: Add ohci usb host controller support
authorHans de Goede <hdegoede@redhat.com>
Sun, 10 May 2015 12:10:27 +0000 (14:10 +0200)
committerLothar Waßmann <LW@KARO-electronics.de>
Tue, 8 Sep 2015 20:39:39 +0000 (22:39 +0200)
This commit adds support for the OHCI companion controller, which makes
usb-1 devices directly plugged into to usb root port work.

Note for now this switches usb-keyboard support for sunxi back from int-queue
support to the old interrupt polling method. Adding int-queue support to the
ohci code and switching back to int-queue support is in the works.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
arch/arm/include/asm/arch-sunxi/clock_sun4i.h
arch/arm/include/asm/arch-sunxi/clock_sun6i.h
drivers/usb/host/Makefile
drivers/usb/host/ohci-sunxi.c [new file with mode: 0644]
include/configs/sunxi-common.h

index c28ee0528fb822d4da57e60a578f68ed8b5fdfad..63c33190b8cd5a036d799a4265c90a13e866f7cc 100644 (file)
@@ -320,6 +320,8 @@ struct sunxi_ccm_reg {
 #define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
 #define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
 #define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 6)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 7)
 #define CCM_USB_CTRL_PHYGATE (0x1 << 8)
 /* These 3 are sun6i only, define them as 0 on sun4i */
 #define CCM_USB_CTRL_PHY0_CLK 0
index 04c6d58186808f501d0d34996b7c84dd9a70c010..bacd70adf60f79bb629b734cca80782ca5f7063b 100644 (file)
@@ -246,6 +246,8 @@ struct sunxi_ccm_reg {
 #define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
 #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
 #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
 
 #define CCM_GMAC_CTRL_TX_CLK_SRC_MII   0x0
 #define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
index 3b57e5655334bd817be0953b6cb260411a78479a..4d35d3e5fe893c94d2e0c63d2c6528ced22a742d 100644 (file)
@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
 obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o
 obj-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o
 obj-$(CONFIG_USB_OHCI_EP93XX) += ohci-ep93xx.o
+obj-$(CONFIG_USB_OHCI_SUNXI) += ohci-sunxi.o
 
 # echi
 obj-$(CONFIG_USB_EHCI) += ehci-hcd.o
diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
new file mode 100644 (file)
index 0000000..e33a8f7
--- /dev/null
@@ -0,0 +1,104 @@
+/*
+ * Sunxi ohci glue
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <usb.h>
+#include "ohci.h"
+
+struct ohci_sunxi_priv {
+       ohci_t ohci;
+       int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
+       int usb_gate_mask; /* Mask of usb_clk_cfg clk gate bits for this hcd */
+       int phy_index;     /* Index of the usb-phy attached to this hcd */
+};
+
+static int ohci_usb_probe(struct udevice *dev)
+{
+       struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+       struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
+       struct ohci_sunxi_priv *priv = dev_get_priv(dev);
+       struct ohci_regs *regs = (struct ohci_regs *)dev_get_addr(dev);
+
+       bus_priv->companion = true;
+
+       /*
+        * This should go away once we've moved to the driver model for
+        * clocks resp. phys.
+        */
+       if (regs == (void *)(SUNXI_USB1_BASE + 0x400)) {
+               priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
+               priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
+               priv->phy_index = 1;
+       } else {
+               priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI1;
+               priv->usb_gate_mask = CCM_USB_CTRL_OHCI1_CLK;
+               priv->phy_index = 2;
+       }
+
+       setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
+       setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+       setbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
+#endif
+
+       sunxi_usb_phy_init(priv->phy_index);
+       sunxi_usb_phy_power_on(priv->phy_index);
+
+       return ohci_register(dev, regs);
+}
+
+static int ohci_usb_remove(struct udevice *dev)
+{
+       struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+       struct ohci_sunxi_priv *priv = dev_get_priv(dev);
+       int ret;
+
+       ret = ohci_deregister(dev);
+       if (ret)
+               return ret;
+
+       sunxi_usb_phy_power_off(priv->phy_index);
+       sunxi_usb_phy_exit(priv->phy_index);
+
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+       clrbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
+#endif
+       clrbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
+       clrbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
+
+       return 0;
+}
+
+static const struct udevice_id ohci_usb_ids[] = {
+       { .compatible = "allwinner,sun4i-a10-ohci", },
+       { .compatible = "allwinner,sun5i-a13-ohci", },
+       { .compatible = "allwinner,sun6i-a31-ohci", },
+       { .compatible = "allwinner,sun7i-a20-ohci", },
+       { .compatible = "allwinner,sun8i-a23-ohci", },
+       { .compatible = "allwinner,sun9i-a80-ohci", },
+       { }
+};
+
+U_BOOT_DRIVER(usb_ohci) = {
+       .name   = "ohci_sunxi",
+       .id     = UCLASS_USB,
+       .of_match = ohci_usb_ids,
+       .probe = ohci_usb_probe,
+       .remove = ohci_usb_remove,
+       .ops    = &ohci_usb_ops,
+       .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+       .priv_auto_alloc_size = sizeof(struct ohci_sunxi_priv),
+       .flags  = DM_FLAG_ALLOC_PRIV_DMA,
+};
index c8ebb54f374dddec486e7238ca83b71f06218e01..222e739461a165e121474b94f9ea9552891d4f28 100644 (file)
@@ -297,6 +297,9 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_OHCI_SUNXI
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 #endif
 
@@ -314,7 +317,7 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_PREBOOT
 #define CONFIG_SYS_STDIO_DEREGISTER
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
+#define CONFIG_SYS_USB_EVENT_POLL
 #endif
 
 #if !defined CONFIG_ENV_IS_IN_MMC && \