}
/*
- * Configure EMIF4D5 registers and MR registers
+ * Configure EMIF4D5 registers and MR registers For details about these magic
+ * values please see the EMIF registers section of the TRM.
*/
void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
{
writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
- writel(0x1, &emif_reg[nr]->emif_iodft_tlgc);
writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
writel(regs->temp_alert_config, &emif_reg[nr]->emif_temp_alert_config);
writel(regs->emif_cos_config, &emif_reg[nr]->emif_cos_config);
}
- writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
- writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
+ /*
+ * Sequence to ensure that the PHY is in a known state prior to
+ * startting hardware leveling. Also acts as to latch some state from
+ * the EMIF into the PHY.
+ */
+ writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
+ writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc);
+ writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
+
+ clrbits_le32(&emif_reg[nr]->emif_sdram_ref_ctrl,
+ EMIF_REG_INITREF_DIS_MASK);
+
writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
+ writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+ writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
+
+ /* Perform hardware leveling. */
+ udelay(1000);
+ writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) |
+ 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36);
+ writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw) |
+ 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw);
+
+ writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl);
+
+ /* Enable read leveling */
+ writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_ctl);
+
+ /*
+ * Enable full read and write leveling. Wait for read and write
+ * leveling bit to clear RDWRLVLFULL_START bit 31
+ */
+ while((readl(&emif_reg[nr]->emif_rd_wr_lvl_ctl) & 0x80000000) != 0)
+ ;
+
+ /* Check the timeout register to see if leveling is complete */
+ if((readl(&emif_reg[nr]->emif_status) & 0x70) != 0)
+ puts("DDR3 H/W leveling incomplete with errors\n");
if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) {
configure_mr(nr, 0);
void config_sdram(const struct emif_regs *regs, int nr)
{
if (regs->zq_config) {
- /*
- * A value of 0x2800 for the REF CTRL will give us
- * about 570us for a delay, which will be long enough
- * to configure things.
- */
- writel(0x2800, &emif_reg[nr]->emif_sdram_ref_ctrl);
writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
}
+ writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
- writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
}
/**
writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw);
}
-void __weak emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
-{
-}
-
/*
- * Configure EXT PHY registers
+ * Configure EXT PHY registers for hardware leveling
*/
static void ext_phy_settings(const struct emif_regs *regs, int nr)
{
- u32 *ext_phy_ctrl_base = 0;
- u32 *emif_ext_phy_ctrl_base = 0;
- const u32 *ext_phy_ctrl_const_regs;
- u32 i = 0;
- u32 size;
-
- ext_phy_ctrl_base = (u32 *)&(regs->emif_ddr_ext_phy_ctrl_1);
- emif_ext_phy_ctrl_base =
- (u32 *)&(emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
-
- /* Configure external phy control timing registers */
- for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
- writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
- }
-
/*
- * external phy 6-24 registers do not change with
- * ddr frequency
+ * Enable hardware leveling on the EMIF. For details about these
+ * magic values please see the EMIF registers section of the TRM.
*/
- emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs, &size);
-
- if (!size)
- return;
+ writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+ writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22_shdw);
+ writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23);
+ writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23_shdw);
+ writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24);
+ writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24_shdw);
+ writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25);
+ writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25_shdw);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26_shdw);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27_shdw);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28_shdw);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29_shdw);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30);
+ writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30_shdw);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31_shdw);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32_shdw);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33_shdw);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34_shdw);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35);
+ writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35_shdw);
+ writel(0x000000FF, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36);
+ writel(0x000000FF, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw);
- for (i = 0; i < size; i++) {
- writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
- }
+ /*
+ * Sequence to ensure that the PHY is again in a known state after
+ * hardware leveling.
+ */
+ writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
+ writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc);
+ writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
}
/**
void config_ddr_phy(const struct emif_regs *regs, int nr)
{
/*
- * disable initialization and refreshes for now until we
+ * Disable initialization and refreshes for now until we
* finish programming EMIF regs.
+ * Also set time between rising edge of DDR_RESET to rising
+ * edge of DDR_CKE to > 500us per memory spec.
*/
+#ifndef CONFIG_AM43XX
setbits_le32(&emif_reg[nr]->emif_sdram_ref_ctrl,
EMIF_REG_INITREF_DIS_MASK);
+#endif
+ if (regs->zq_config)
+ writel(0x80003100, &emif_reg[nr]->emif_sdram_ref_ctrl);
writel(regs->emif_ddr_phy_ctlr_1,
&emif_reg[nr]->emif_ddr_phy_ctrl_1);
u32 emif_rd_wr_exec_thresh;
u32 emif_cos_config;
u32 padding9[6];
- u32 emif_ddr_phy_status[21];
- u32 padding10[27];
+ u32 emif_ddr_phy_status[28];
+ u32 padding10[20];
u32 emif_ddr_ext_phy_ctrl_1;
u32 emif_ddr_ext_phy_ctrl_1_shdw;
u32 emif_ddr_ext_phy_ctrl_2;
u32 emif_ddr_ext_phy_ctrl_23_shdw;
u32 emif_ddr_ext_phy_ctrl_24;
u32 emif_ddr_ext_phy_ctrl_24_shdw;
- u32 padding[22];
- u32 emif_ddr_fifo_misaligned_clear_1;
- u32 emif_ddr_fifo_misaligned_clear_2;
+ u32 emif_ddr_ext_phy_ctrl_25;
+ u32 emif_ddr_ext_phy_ctrl_25_shdw;
+ u32 emif_ddr_ext_phy_ctrl_26;
+ u32 emif_ddr_ext_phy_ctrl_26_shdw;
+ u32 emif_ddr_ext_phy_ctrl_27;
+ u32 emif_ddr_ext_phy_ctrl_27_shdw;
+ u32 emif_ddr_ext_phy_ctrl_28;
+ u32 emif_ddr_ext_phy_ctrl_28_shdw;
+ u32 emif_ddr_ext_phy_ctrl_29;
+ u32 emif_ddr_ext_phy_ctrl_29_shdw;
+ u32 emif_ddr_ext_phy_ctrl_30;
+ u32 emif_ddr_ext_phy_ctrl_30_shdw;
+ u32 emif_ddr_ext_phy_ctrl_31;
+ u32 emif_ddr_ext_phy_ctrl_31_shdw;
+ u32 emif_ddr_ext_phy_ctrl_32;
+ u32 emif_ddr_ext_phy_ctrl_32_shdw;
+ u32 emif_ddr_ext_phy_ctrl_33;
+ u32 emif_ddr_ext_phy_ctrl_33_shdw;
+ u32 emif_ddr_ext_phy_ctrl_34;
+ u32 emif_ddr_ext_phy_ctrl_34_shdw;
+ u32 emif_ddr_ext_phy_ctrl_35;
+ u32 emif_ddr_ext_phy_ctrl_35_shdw;
+ union {
+ u32 emif_ddr_ext_phy_ctrl_36;
+ u32 emif_ddr_fifo_misaligned_clear_1;
+ };
+ union {
+ u32 emif_ddr_ext_phy_ctrl_36_shdw;
+ u32 emif_ddr_fifo_misaligned_clear_2;
+ };
};
struct dmm_lisa_map_regs {
projects / karo-tx-uboot.git / commitdiff