#define BTUSB_BCM_APPLE 0x10000
#define BTUSB_REALTEK 0x20000
#define BTUSB_BCM2045 0x40000
+#define BTUSB_IFNUM_2 0x80000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
/* Apple-specific (Broadcom) devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
- .driver_info = BTUSB_BCM_APPLE },
+ .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },
/* MediaTek MT76x0E */
{ USB_DEVICE(0x0e8d, 0x763f) },
BT_INFO("%s: Intel device is already patched. patch num: %02x",
hdev->name, ver->fw_patch_num);
kfree_skb(skb);
- btintel_check_bdaddr(hdev);
- return 0;
+ goto complete;
}
/* Opens the firmware patch file based on the firmware version read
fw = btusb_setup_intel_get_fw(hdev, ver);
if (!fw) {
kfree_skb(skb);
- btintel_check_bdaddr(hdev);
- return 0;
+ goto complete;
}
fw_ptr = fw->data;
BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
hdev->name);
- btintel_check_bdaddr(hdev);
- return 0;
+ goto complete;
exit_mfg_disable:
/* Disable the manufacturer mode without reset */
BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
- btintel_check_bdaddr(hdev);
- return 0;
+ goto complete;
exit_mfg_deactivate:
release_firmware(fw);
BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
hdev->name);
+complete:
+ /* Set the event mask for Intel specific vendor events. This enables
+ * a few extra events that are useful during general operation.
+ */
+ btintel_set_event_mask_mfg(hdev, false);
+
btintel_check_bdaddr(hdev);
return 0;
}
*/
btintel_load_ddc_config(hdev, fwname);
+ /* Set the event mask for Intel specific vendor events. This enables
+ * a few extra events that are useful during general operation. It
+ * does not enable any debugging related events.
+ *
+ * The device will function correctly without these events enabled
+ * and thus no need to fail the setup.
+ */
+ btintel_set_event_mask(hdev, false);
+
return 0;
}
struct usb_endpoint_descriptor *ep_desc;
struct btusb_data *data;
struct hci_dev *hdev;
+ unsigned ifnum_base;
int i, err;
BT_DBG("intf %p id %p", intf, id);
/* interface numbers are hardcoded in the spec */
- if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
- return -ENODEV;
+ if (intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+ if (!(id->driver_info & BTUSB_IFNUM_2))
+ return -ENODEV;
+ if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
+ return -ENODEV;
+ }
+
+ ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;
if (!id->driver_info) {
const struct usb_device_id *match;
#ifdef CONFIG_BT_HCIBTUSB_BCM
if (id->driver_info & BTUSB_BCM_PATCHRAM) {
+ hdev->manufacturer = 15;
hdev->setup = btbcm_setup_patchram;
hdev->set_diag = btusb_bcm_set_diag;
hdev->set_bdaddr = btbcm_set_bdaddr;
/* Broadcom LM_DIAG Interface numbers are hardcoded */
- data->diag = usb_ifnum_to_if(data->udev, 2);
+ data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
}
if (id->driver_info & BTUSB_BCM_APPLE) {
+ hdev->manufacturer = 15;
hdev->setup = btbcm_setup_apple;
hdev->set_diag = btusb_bcm_set_diag;
/* Broadcom LM_DIAG Interface numbers are hardcoded */
- data->diag = usb_ifnum_to_if(data->udev, 2);
+ data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
}
#endif
if (id->driver_info & BTUSB_INTEL) {
+ hdev->manufacturer = 2;
hdev->setup = btusb_setup_intel;
hdev->shutdown = btusb_shutdown_intel;
hdev->set_diag = btintel_set_diag_mfg;
}
if (id->driver_info & BTUSB_INTEL_NEW) {
+ hdev->manufacturer = 2;
hdev->send = btusb_send_frame_intel;
hdev->setup = btusb_setup_intel_new;
hdev->hw_error = btintel_hw_error;
set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
}
- if (id->driver_info & BTUSB_INTEL_BOOT)
+ if (id->driver_info & BTUSB_INTEL_BOOT) {
+ hdev->manufacturer = 2;
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+ }
if (id->driver_info & BTUSB_ATH3012) {
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
/* AMP controllers do not support SCO packets */
data->isoc = NULL;
} else {
- /* Interface numbers are hardcoded in the specification */
- data->isoc = usb_ifnum_to_if(data->udev, 1);
+ /* Interface orders are hardcoded in the specification */
+ data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
}
if (!reset)