kconfig: add Kconfig options for PARTITIONS

[karo-tx-uboot.git] / include / configs / dra7xx_evm.h

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 8d0a0eb8bc65bd22a5bca333ab3c58f19b49a6be..dee2b11056e79d1f42d219f997e4c0416393c22a 100644 (file)
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -13,6 +13,7 @@
 #define __CONFIG_DRA7XX_EVM_H
 
 #define CONFIG_DRA7XX
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #ifndef CONFIG_QSPI_BOOT
 /* MMC ENV related defines */
@@ -47,8 +48,7 @@
 /* Enhance our eMMC support / experience. */
 #define CONFIG_CMD_GPT
 #define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
 
 /* CPSW Ethernet */
 #define CONFIG_CMD_NET                 /* 'bootp' and 'tftp' */
@@ -115,8 +115,6 @@
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_BUS             0
-#define CONFIG_SPL_SPI_CS              0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
 #define CONFIG_SUPPORT_EMMC_BOOT
@@ -143,4 +141,92 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                                CONFIG_SYS_SCSI_MAX_LUN)
 
+/* NAND support */
+#ifdef CONFIG_NAND
+/* NAND: device related configs */
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
+                                        CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+/* NAND: driver related configs */
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
+                                        10, 11, 12, 13, 14, 15, 16, 17, \
+                                        18, 19, 20, 21, 22, 23, 24, 25, \
+                                        26, 27, 28, 29, 30, 31, 32, 33, \
+                                        34, 35, 36, 37, 38, 39, 40, 41, \
+                                        42, 43, 44, 45, 46, 47, 48, 49, \
+                                        50, 51, 52, 53, 54, 55, 56, 57, }
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       14
+#define MTDIDS_DEFAULT                 "nand0=nand.0"
+#define MTDPARTS_DEFAULT               "mtdparts=nand.0:" \
+                                       "128k(NAND.SPL)," \
+                                       "128k(NAND.SPL.backup1)," \
+                                       "128k(NAND.SPL.backup2)," \
+                                       "128k(NAND.SPL.backup3)," \
+                                       "256k(NAND.u-boot-spl-os)," \
+                                       "1m(NAND.u-boot)," \
+                                       "128k(NAND.u-boot-env)," \
+                                       "128k(NAND.u-boot-env.backup1)," \
+                                       "8m(NAND.kernel)," \
+                                       "-(NAND.rootfs)"
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x000c0000
+/* NAND: SPL related configs */
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_AM33XX_BCH
+#endif
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS                0x00080000 /* os-boot params*/
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x00200000 /* kernel offset */
+#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
+#endif
+#endif /* !CONFIG_NAND */
+
+/* Parallel NOR Support */
+#if defined(CONFIG_NOR)
+/* NOR: device related configs */
+#define CONFIG_SYS_MAX_FLASH_SECT      512
+#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_SIZE          (64 * 1024 * 1024) /* 64 MB */
+/* #define CONFIG_INIT_IGNORE_ERROR */
+#undef CONFIG_SYS_NO_FLASH
+#define CONFIG_CMD_FLASH
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_FLASH_BASE          (0x08000000)
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
+/* Reduce SPL size by removing unlikey targets */
+#ifdef CONFIG_NOR_BOOT
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE           (128 * 1024)    /* 128 KiB */
+#define MTDIDS_DEFAULT                 "nor0=physmap-flash.0"
+#define MTDPARTS_DEFAULT               "mtdparts=physmap-flash.0:" \
+                                       "128k(NOR.SPL)," \
+                                       "128k(NOR.SPL.backup1)," \
+                                       "128k(NOR.SPL.backup2)," \
+                                       "128k(NOR.SPL.backup3)," \
+                                       "256k(NOR.u-boot-spl-os)," \
+                                       "1m(NOR.u-boot)," \
+                                       "128k(NOR.u-boot-env)," \
+                                       "128k(NOR.u-boot-env.backup1)," \
+                                       "8m(NOR.kernel)," \
+                                       "-(NOR.rootfs)"
+#define CONFIG_ENV_OFFSET              0x001c0000
+#define CONFIG_ENV_OFFSET_REDUND       0x001e0000
+#endif
+#endif  /* NOR support */
+
 #endif /* __CONFIG_DRA7XX_EVM_H */