karo: tx53: update romupdate command

[karo-tx-uboot.git] / include / configs / ks2_evm.h

diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
index 5b3d68b7aaa2688cb821795f2ba4506173179e90..42280ca0a505834d8e61e2e2c8c28f25802c65f9 100644 (file)
--- a/include/configs/ks2_evm.h
+++ b/include/configs/ks2_evm.h
@@ -20,10 +20,8 @@
 #define CONFIG_SYS_THUMB_BUILD
 
 /* SoC Configuration */
-#define CONFIG_ARMV7
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_TEXT_BASE           0x0c001000
 #define CONFIG_SPL_TARGET              "u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF
@@ -101,12 +99,12 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT         32
 #define CONFIG_NET_MULTI
-#define CONFIG_GET_LINK_STATUS_ATTEMPTS        5
 #define CONFIG_SYS_SGMII_REFCLK_MHZ    312
 #define CONFIG_SYS_SGMII_LINERATE_MHZ  1250
 #define CONFIG_SYS_SGMII_RATESCALE     2
 
 /* Keyston Navigator Configuration */
+#define CONFIG_TI_KSNAV
 #define CONFIG_KSNAV_QM_BASE_ADDRESS           KS2_QM_BASE_ADDRESS
 #define CONFIG_KSNAV_QM_CONF_BASE              KS2_QM_CONF_BASE
 #define CONFIG_KSNAV_QM_DESC_SETUP_BASE                KS2_QM_DESC_SETUP_BASE
@@ -123,6 +121,7 @@
 #define CONFIG_KSNAV_QM_QPOOL_NUM              KS2_QM_QPOOL_NUM
 
 /* NETCP pktdma */
+#define CONFIG_KSNAV_PKTDMA_NETCP
 #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE      KS2_NETCP_PDMA_CTRL_BASE
 #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE                KS2_NETCP_PDMA_TX_BASE
 #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM      KS2_NETCP_PDMA_TX_CH_NUM
@@ -136,11 +135,16 @@
 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE   KS2_NETCP_PDMA_TX_SND_QUEUE
 
 /* Keystone net */
+#define CONFIG_DRIVER_TI_KEYSTONE_NET
 #define CONFIG_KSNET_MAC_ID_BASE               KS2_MAC_ID_BASE_ADDR
 #define CONFIG_KSNET_NETCP_BASE                        KS2_NETCP_BASE
 #define CONFIG_KSNET_SERDES_SGMII_BASE         KS2_SGMII_SERDES_BASE
+#define CONFIG_KSNET_SERDES_SGMII2_BASE                KS2_SGMII_SERDES2_BASE
 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII    KS2_LANES_PER_SGMII_SERDES
 
+/* SerDes */
+#define CONFIG_TI_KEYSTONE_SERDES
+
 /* AEMIF */
 #define CONFIG_TI_AEMIF
 #define CONFIG_AEMIF_CNTRL_BASE                KS2_AEMIF_CNTRL_BASE
@@ -219,6 +223,8 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
 /* U-Boot general configuration */
 #define CONFIG_SYS_GENERIC_BOARD
@@ -240,30 +246,25 @@
 #define CONFIG_BOOTDELAY               3
 #define CONFIG_BOOTFILE                        "uImage"
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       "boot=ramfs\0"                                                  \
+       CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS                             \
+       "boot=ubi\0"                                                    \
        "tftp_root=/\0"                                                 \
        "nfs_root=/export\0"                                            \
        "mem_lpae=1\0"                                                  \
        "mem_reserve=512M\0"                                            \
        "addr_fdt=0x87000000\0"                                         \
        "addr_kern=0x88000000\0"                                        \
-       KS2_ADDR_MON                                                    \
        "addr_uboot=0x87000000\0"                                       \
        "addr_fs=0x82000000\0"                                          \
        "addr_ubi=0x82000000\0"                                         \
        "addr_secdb_key=0xc000000\0"                                    \
        "fdt_high=0xffffffff\0"                                         \
-       KS2_FDT_NAME                                                    \
-       "name_fs=arago-console-image.cpio.gz\0"                         \
-       "name_kern=uImage\0"                                            \
-       KS2_NAME_MON                                                    \
-       NAME_UBOOT                                                      \
-       NAME_UBI                                                        \
+       "name_kern=uImage-keystone-evm.bin\0"                           \
        "run_mon=mon_install ${addr_mon}\0"                             \
        "run_kern=bootm ${addr_kern} - ${addr_fdt}\0"                   \
        "init_net=run args_all args_net\0"                              \
        "init_ubi=run args_all args_ubi; "                              \
-               "ubi part ubifs; ubifsmount boot;"                      \
+               "ubi part ubifs; ubifsmount ubi:boot;"                  \
                "ubifsload ${addr_secdb_key} securedb.key.bin;\0"       \
        "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"       \
        "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0"               \
@@ -277,7 +278,6 @@
        "burn_uboot_nand=nand erase 0 0x100000; "                       \
                "nand write ${addr_uboot} 0 ${filesize}\0"              \
        "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0"  \
-       KS2_ARGS_UBI                                                    \
        "args_net=setenv bootargs ${bootargs} rootfstype=nfs "          \
                "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"     \
                "${nfs_options} ip=dhcp\0"                              \
@@ -319,8 +319,4 @@
 #include <asm/arch/clock.h>
 #define CONFIG_SYS_HZ_CLOCK            clk_get_rate(KS2_CLK1_6)
 
-/* Maximum memory size for relocated U-boot at the end of the DDR3 memory
-   which is NOT applicable for DDR ECC test */
-#define CONFIG_MAX_UBOOT_MEM_SIZE      (4 << 20)       /* 4 MiB */
-
 #endif /* __CONFIG_KS2_EVM_H */