arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include <dt-bindings/gpio/gpio.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19 #include <dt-bindings/clock/maxim,max77686.h>
  20
  21 / {
  22         model = "Samsung Trats 2 based on Exynos4412";
  23         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  24
  25         aliases {
  26                 i2c9 = &i2c_ak8975;
  27                 i2c10 = &i2c_cm36651;
  28                 i2c11 = &i2c_max77693;
  29                 i2c12 = &i2c_max77693_fuel;
  30         };
  31
  32         memory {
  33                 reg =  <0x40000000 0x40000000>;
  34         };
  35
  36         chosen {
  37                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  38                 stdout-path = &serial_2;
  39         };
  40
  41         firmware@0204F000 {
  42                 compatible = "samsung,secure-firmware";
  43                 reg = <0x0204F000 0x1000>;
  44         };
  45
  46         fixed-rate-clocks {
  47                 xxti {
  48                         compatible = "samsung,clock-xxti", "fixed-clock";
  49                         clock-frequency = <0>;
  50                 };
  51
  52                 xusbxti {
  53                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  54                         clock-frequency = <24000000>;
  55                 };
  56         };
  57
  58         regulators {
  59                 compatible = "simple-bus";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62
  63                 cam_io_reg: voltage-regulator-1 {
  64                         compatible = "regulator-fixed";
  65                         regulator-name = "CAM_SENSOR_A";
  66                         regulator-min-microvolt = <2800000>;
  67                         regulator-max-microvolt = <2800000>;
  68                         gpio = <&gpm0 2 0>;
  69                         enable-active-high;
  70                 };
  71
  72                 lcd_vdd3_reg: voltage-regulator-2 {
  73                         compatible = "regulator-fixed";
  74                         regulator-name = "LCD_VDD_2.2V";
  75                         regulator-min-microvolt = <2200000>;
  76                         regulator-max-microvolt = <2200000>;
  77                         gpio = <&gpc0 1 0>;
  78                         enable-active-high;
  79                 };
  80
  81                 cam_af_reg: voltage-regulator-3 {
  82                         compatible = "regulator-fixed";
  83                         regulator-name = "CAM_AF";
  84                         regulator-min-microvolt = <2800000>;
  85                         regulator-max-microvolt = <2800000>;
  86                         gpio = <&gpm0 4 0>;
  87                         enable-active-high;
  88                 };
  89
  90                 ps_als_reg: voltage-regulator-5 {
  91                         compatible = "regulator-fixed";
  92                         regulator-name = "LED_A_3.0V";
  93                         regulator-min-microvolt = <3000000>;
  94                         regulator-max-microvolt = <3000000>;
  95                         gpio = <&gpj0 5 0>;
  96                         enable-active-high;
  97                 };
  98         };
  99
 100         gpio-keys {
 101                 compatible = "gpio-keys";
 102
 103                 key-down {
 104                         gpios = <&gpx3 3 1>;
 105                         linux,code = <114>;
 106                         label = "volume down";
 107                         debounce-interval = <10>;
 108                 };
 109
 110                 key-up {
 111                         gpios = <&gpx2 2 1>;
 112                         linux,code = <115>;
 113                         label = "volume up";
 114                         debounce-interval = <10>;
 115                 };
 116
 117                 key-power {
 118                         gpios = <&gpx2 7 1>;
 119                         linux,code = <116>;
 120                         label = "power";
 121                         debounce-interval = <10>;
 122                         gpio-key,wakeup;
 123                 };
 124
 125                 key-ok {
 126                         gpios = <&gpx0 1 1>;
 127                         linux,code = <139>;
 128                         label = "ok";
 129                         debounce-inteval = <10>;
 130                         gpio-key,wakeup;
 131                 };
 132         };
 133
 134         i2c_max77693: i2c-gpio-1 {
 135                 compatible = "i2c-gpio";
 136                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 137                 i2c-gpio,delay-us = <2>;
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140                 status = "okay";
 141
 142                 max77693@66 {
 143                         compatible = "maxim,max77693";
 144                         interrupt-parent = <&gpx1>;
 145                         interrupts = <5 2>;
 146                         reg = <0x66>;
 147
 148                         regulators {
 149                                 esafeout1_reg: ESAFEOUT1@1 {
 150                                         regulator-name = "ESAFEOUT1";
 151                                 };
 152                                 esafeout2_reg: ESAFEOUT2@2 {
 153                                         regulator-name = "ESAFEOUT2";
 154                                 };
 155                                 charger_reg: CHARGER@0 {
 156                                         regulator-name = "CHARGER";
 157                                         regulator-min-microamp = <60000>;
 158                                         regulator-max-microamp = <2580000>;
 159                                 };
 160                         };
 161
 162                         max77693_haptic {
 163                                 compatible = "maxim,max77693-haptic";
 164                                 haptic-supply = <&ldo26_reg>;
 165                                 pwms = <&pwm 0 38022 0>;
 166                         };
 167
 168                         charger {
 169                                 compatible = "maxim,max77693-charger";
 170
 171                                 maxim,constant-microvolt = <4350000>;
 172                                 maxim,min-system-microvolt = <3600000>;
 173                                 maxim,thermal-regulation-celsius = <100>;
 174                                 maxim,battery-overcurrent-microamp = <3500000>;
 175                                 maxim,charge-input-threshold-microvolt = <4300000>;
 176                         };
 177                 };
 178         };
 179
 180         i2c_max77693_fuel: i2c-gpio-3 {
 181                 compatible = "i2c-gpio";
 182                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 183                 i2c-gpio,delay-us = <2>;
 184                 #address-cells = <1>;
 185                 #size-cells = <0>;
 186                 status = "okay";
 187
 188                 max77693-fuel-gauge@36 {
 189                         compatible = "maxim,max17047";
 190                         interrupt-parent = <&gpx2>;
 191                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 192                         reg = <0x36>;
 193
 194                         maxim,over-heat-temp = <700>;
 195                         maxim,over-volt = <4500>;
 196                 };
 197         };
 198
 199         i2c_ak8975: i2c-gpio-0 {
 200                 compatible = "i2c-gpio";
 201                 gpios = <&gpy2 4 0>, <&gpy2 5 0>;
 202                 i2c-gpio,delay-us = <2>;
 203                 #address-cells = <1>;
 204                 #size-cells = <0>;
 205                 status = "okay";
 206
 207                 ak8975@0c {
 208                         compatible = "asahi-kasei,ak8975";
 209                         reg = <0x0c>;
 210                         gpios = <&gpj0 7 0>;
 211                 };
 212         };
 213
 214         i2c_cm36651: i2c-gpio-2 {
 215                 compatible = "i2c-gpio";
 216                 gpios = <&gpf0 0 1>, <&gpf0 1 1>;
 217                 i2c-gpio,delay-us = <2>;
 218                 #address-cells = <1>;
 219                 #size-cells = <0>;
 220
 221                 cm36651@18 {
 222                         compatible = "capella,cm36651";
 223                         reg = <0x18>;
 224                         interrupt-parent = <&gpx0>;
 225                         interrupts = <2 2>;
 226                         vled-supply = <&ps_als_reg>;
 227                 };
 228         };
 229
 230         camera: camera {
 231                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 232                 pinctrl-names = "default";
 233                 status = "okay";
 234                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 235                                   <&clock CLK_MOUT_CAM1>;
 236                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 237                                          <&clock CLK_XUSBXTI>;
 238
 239
 240         };
 241
 242         sound {
 243                 compatible = "samsung,trats2-audio";
 244                 samsung,i2s-controller = <&i2s0>;
 245                 samsung,model = "Trats2";
 246                 samsung,audio-codec = <&wm1811>;
 247                 samsung,audio-routing =
 248                         "SPK", "SPKOUTLN",
 249                         "SPK", "SPKOUTLP",
 250                         "SPK", "SPKOUTRN",
 251                         "SPK", "SPKOUTRP";
 252         };
 253
 254         thermistor-ap@0 {
 255                 compatible = "ntc,ncp15wb473";
 256                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 257                 pullup-ohm = <100000>;   /* 100K */
 258                 pulldown-ohm = <100000>; /* 100K */
 259                 io-channels = <&adc 1>;  /* AP temperature */
 260         };
 261
 262         thermistor-battery@1 {
 263                 compatible = "ntc,ncp15wb473";
 264                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 265                 pullup-ohm = <100000>;   /* 100K */
 266                 pulldown-ohm = <100000>; /* 100K */
 267                 io-channels = <&adc 2>;  /* Battery temperature */
 268         };
 269
 270         thermal-zones {
 271                 cpu_thermal: cpu-thermal {
 272                         cooling-maps {
 273                                 map0 {
 274                                      /* Corresponds to 800MHz at freq_table */
 275                                      cooling-device = <&cpu0 7 7>;
 276                                 };
 277                                 map1 {
 278                                      /* Corresponds to 200MHz at freq_table */
 279                                      cooling-device = <&cpu0 13 13>;
 280                                };
 281                        };
 282                 };
 283         };
 284 };
 285
 286 &adc {
 287         vdd-supply = <&ldo3_reg>;
 288         status = "okay";
 289 };
 290
 291 &cpu0 {
 292         cpu0-supply = <&buck2_reg>;
 293 };
 294
 295 &csis_0 {
 296         status = "okay";
 297         vddcore-supply = <&ldo8_reg>;
 298         vddio-supply = <&ldo10_reg>;
 299         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 300                         <&clock CLK_SCLK_CSIS0>;
 301         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 302         assigned-clock-rates = <0>, <176000000>;
 303
 304         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 305         port@3 {
 306                 reg = <3>;
 307                 csis0_ep: endpoint {
 308                         remote-endpoint = <&s5c73m3_ep>;
 309                         data-lanes = <1 2 3 4>;
 310                         samsung,csis-hs-settle = <12>;
 311                 };
 312         };
 313 };
 314
 315 &csis_1 {
 316         status = "okay";
 317         vddcore-supply = <&ldo8_reg>;
 318         vddio-supply = <&ldo10_reg>;
 319         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 320                         <&clock CLK_SCLK_CSIS1>;
 321         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 322         assigned-clock-rates = <0>, <176000000>;
 323
 324         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 325         port@4 {
 326                 reg = <4>;
 327                 csis1_ep: endpoint {
 328                         remote-endpoint = <&is_s5k6a3_ep>;
 329                         data-lanes = <1>;
 330                         samsung,csis-hs-settle = <18>;
 331                         samsung,csis-wclk;
 332                 };
 333         };
 334 };
 335
 336 &dsi_0 {
 337         vddcore-supply = <&ldo8_reg>;
 338         vddio-supply = <&ldo10_reg>;
 339         samsung,pll-clock-frequency = <24000000>;
 340         status = "okay";
 341
 342         ports {
 343                 #address-cells = <1>;
 344                 #size-cells = <0>;
 345
 346                 port@1 {
 347                         reg = <1>;
 348
 349                         dsi_out: endpoint {
 350                                 remote-endpoint = <&dsi_in>;
 351                                 samsung,burst-clock-frequency = <500000000>;
 352                                 samsung,esc-clock-frequency = <20000000>;
 353                         };
 354                 };
 355         };
 356
 357         panel@0 {
 358                 compatible = "samsung,s6e8aa0";
 359                 reg = <0>;
 360                 vdd3-supply = <&lcd_vdd3_reg>;
 361                 vci-supply = <&ldo25_reg>;
 362                 reset-gpios = <&gpy4 5 0>;
 363                 power-on-delay= <50>;
 364                 reset-delay = <100>;
 365                 init-delay = <100>;
 366                 flip-horizontal;
 367                 flip-vertical;
 368                 panel-width-mm = <58>;
 369                 panel-height-mm = <103>;
 370
 371                 display-timings {
 372                         timing-0 {
 373                                 clock-frequency = <57153600>;
 374                                 hactive = <720>;
 375                                 vactive = <1280>;
 376                                 hfront-porch = <5>;
 377                                 hback-porch = <5>;
 378                                 hsync-len = <5>;
 379                                 vfront-porch = <13>;
 380                                 vback-porch = <1>;
 381                                 vsync-len = <2>;
 382                         };
 383                 };
 384
 385                 port {
 386                         dsi_in: endpoint {
 387                                 remote-endpoint = <&dsi_out>;
 388                         };
 389                 };
 390         };
 391 };
 392
 393 &exynos_usbphy {
 394         status = "okay";
 395 };
 396
 397 &fimc_0 {
 398         status = "okay";
 399         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 400                         <&clock CLK_SCLK_FIMC0>;
 401         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 402         assigned-clock-rates = <0>, <176000000>;
 403 };
 404
 405 &fimc_1 {
 406         status = "okay";
 407         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 408                         <&clock CLK_SCLK_FIMC1>;
 409         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 410         assigned-clock-rates = <0>, <176000000>;
 411 };
 412
 413 &fimc_2 {
 414         status = "okay";
 415         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 416                         <&clock CLK_SCLK_FIMC2>;
 417         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 418         assigned-clock-rates = <0>, <176000000>;
 419 };
 420
 421 &fimc_3 {
 422         status = "okay";
 423         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 424                         <&clock CLK_SCLK_FIMC3>;
 425         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 426         assigned-clock-rates = <0>, <176000000>;
 427 };
 428
 429 &fimc_is {
 430         pinctrl-0 = <&fimc_is_uart>;
 431         pinctrl-names = "default";
 432         status = "okay";
 433
 434         i2c1_isp: i2c-isp@12140000 {
 435                 pinctrl-0 = <&fimc_is_i2c1>;
 436                 pinctrl-names = "default";
 437
 438                 s5k6a3@10 {
 439                         compatible = "samsung,s5k6a3";
 440                         reg = <0x10>;
 441                         svdda-supply = <&cam_io_reg>;
 442                         svddio-supply = <&ldo19_reg>;
 443                         afvdd-supply = <&ldo19_reg>;
 444                         clock-frequency = <24000000>;
 445                         /* CAM_B_CLKOUT */
 446                         clocks = <&camera 1>;
 447                         clock-names = "extclk";
 448                         samsung,camclk-out = <1>;
 449                         gpios = <&gpm1 6 0>;
 450
 451                         port {
 452                                 is_s5k6a3_ep: endpoint {
 453                                         remote-endpoint = <&csis1_ep>;
 454                                         data-lanes = <1>;
 455                                 };
 456                         };
 457                 };
 458         };
 459 };
 460
 461 &fimc_lite_0 {
 462         status = "okay";
 463 };
 464
 465 &fimc_lite_1 {
 466         status = "okay";
 467 };
 468
 469 &fimd {
 470         status = "okay";
 471 };
 472
 473 &hsotg {
 474         vusb_d-supply = <&ldo15_reg>;
 475         vusb_a-supply = <&ldo12_reg>;
 476         dr_mode = "peripheral";
 477         status = "okay";
 478 };
 479
 480 &i2c_0 {
 481         samsung,i2c-sda-delay = <100>;
 482         samsung,i2c-slave-addr = <0x10>;
 483         samsung,i2c-max-bus-freq = <400000>;
 484         pinctrl-0 = <&i2c0_bus>;
 485         pinctrl-names = "default";
 486         status = "okay";
 487
 488         s5c73m3@3c {
 489                 compatible = "samsung,s5c73m3";
 490                 reg = <0x3c>;
 491                 standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
 492                 xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
 493                 vdd-int-supply = <&buck9_reg>;
 494                 vddio-cis-supply = <&ldo9_reg>;
 495                 vdda-supply = <&ldo17_reg>;
 496                 vddio-host-supply = <&ldo18_reg>;
 497                 vdd-af-supply = <&cam_af_reg>;
 498                 vdd-reg-supply = <&cam_io_reg>;
 499                 clock-frequency = <24000000>;
 500                 /* CAM_A_CLKOUT */
 501                 clocks = <&camera 0>;
 502                 clock-names = "cis_extclk";
 503                 port {
 504                         s5c73m3_ep: endpoint {
 505                                 remote-endpoint = <&csis0_ep>;
 506                                 data-lanes = <1 2 3 4>;
 507                         };
 508                 };
 509         };
 510 };
 511
 512 &i2c_3 {
 513         samsung,i2c-sda-delay = <100>;
 514         samsung,i2c-slave-addr = <0x10>;
 515         samsung,i2c-max-bus-freq = <400000>;
 516         pinctrl-0 = <&i2c3_bus>;
 517         pinctrl-names = "default";
 518         status = "okay";
 519
 520         mms114-touchscreen@48 {
 521                 compatible = "melfas,mms114";
 522                 reg = <0x48>;
 523                 interrupt-parent = <&gpm2>;
 524                 interrupts = <3 2>;
 525                 x-size = <720>;
 526                 y-size = <1280>;
 527                 avdd-supply = <&ldo23_reg>;
 528                 vdd-supply = <&ldo24_reg>;
 529         };
 530 };
 531
 532 &i2c_4 {
 533         samsung,i2c-sda-delay = <100>;
 534         samsung,i2c-slave-addr = <0x10>;
 535         samsung,i2c-max-bus-freq = <100000>;
 536         pinctrl-0 = <&i2c4_bus>;
 537         pinctrl-names = "default";
 538         status = "okay";
 539
 540         wm1811: wm1811@1a {
 541                 compatible = "wlf,wm1811";
 542                 reg = <0x1a>;
 543                 clocks = <&pmu_system_controller 0>;
 544                 clock-names = "MCLK1";
 545                 DCVDD-supply = <&ldo3_reg>;
 546                 DBVDD1-supply = <&ldo3_reg>;
 547                 wlf,ldo1ena = <&gpj0 4 0>;
 548         };
 549 };
 550
 551 &i2c_7 {
 552         samsung,i2c-sda-delay = <100>;
 553         samsung,i2c-slave-addr = <0x10>;
 554         samsung,i2c-max-bus-freq = <100000>;
 555         pinctrl-0 = <&i2c7_bus>;
 556         pinctrl-names = "default";
 557         status = "okay";
 558
 559         max77686: max77686_pmic@09 {
 560                 compatible = "maxim,max77686";
 561                 interrupt-parent = <&gpx0>;
 562                 interrupts = <7 0>;
 563                 reg = <0x09>;
 564                 #clock-cells = <1>;
 565
 566                 voltage-regulators {
 567                         ldo1_reg: ldo1 {
 568                                 regulator-compatible = "LDO1";
 569                                 regulator-name = "VALIVE_1.0V_AP";
 570                                 regulator-min-microvolt = <1000000>;
 571                                 regulator-max-microvolt = <1000000>;
 572                                 regulator-always-on;
 573                         };
 574
 575                         ldo2_reg: ldo2 {
 576                                 regulator-compatible = "LDO2";
 577                                 regulator-name = "VM1M2_1.2V_AP";
 578                                 regulator-min-microvolt = <1200000>;
 579                                 regulator-max-microvolt = <1200000>;
 580                                 regulator-always-on;
 581                                 regulator-state-mem {
 582                                         regulator-on-in-suspend;
 583                                 };
 584                         };
 585
 586                         ldo3_reg: ldo3 {
 587                                 regulator-compatible = "LDO3";
 588                                 regulator-name = "VCC_1.8V_AP";
 589                                 regulator-min-microvolt = <1800000>;
 590                                 regulator-max-microvolt = <1800000>;
 591                                 regulator-always-on;
 592                         };
 593
 594                         ldo4_reg: ldo4 {
 595                                 regulator-compatible = "LDO4";
 596                                 regulator-name = "VCC_2.8V_AP";
 597                                 regulator-min-microvolt = <2800000>;
 598                                 regulator-max-microvolt = <2800000>;
 599                                 regulator-always-on;
 600                         };
 601
 602                         ldo5_reg: ldo5 {
 603                                 regulator-compatible = "LDO5";
 604                                 regulator-name = "VCC_1.8V_IO";
 605                                 regulator-min-microvolt = <1800000>;
 606                                 regulator-max-microvolt = <1800000>;
 607                                 regulator-always-on;
 608                         };
 609
 610                         ldo6_reg: ldo6 {
 611                                 regulator-compatible = "LDO6";
 612                                 regulator-name = "VMPLL_1.0V_AP";
 613                                 regulator-min-microvolt = <1000000>;
 614                                 regulator-max-microvolt = <1000000>;
 615                                 regulator-always-on;
 616                                 regulator-state-mem {
 617                                         regulator-on-in-suspend;
 618                                 };
 619                         };
 620
 621                         ldo7_reg: ldo7 {
 622                                 regulator-compatible = "LDO7";
 623                                 regulator-name = "VPLL_1.0V_AP";
 624                                 regulator-min-microvolt = <1000000>;
 625                                 regulator-max-microvolt = <1000000>;
 626                                 regulator-always-on;
 627                                 regulator-state-mem {
 628                                         regulator-on-in-suspend;
 629                                 };
 630                         };
 631
 632                         ldo8_reg: ldo8 {
 633                                 regulator-compatible = "LDO8";
 634                                 regulator-name = "VMIPI_1.0V";
 635                                 regulator-min-microvolt = <1000000>;
 636                                 regulator-max-microvolt = <1000000>;
 637                                 regulator-state-mem {
 638                                         regulator-off-in-suspend;
 639                                 };
 640                         };
 641
 642                         ldo9_reg: ldo9 {
 643                                 regulator-compatible = "LDO9";
 644                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 645                                 regulator-min-microvolt = <1200000>;
 646                                 regulator-max-microvolt = <1200000>;
 647                         };
 648
 649                         ldo10_reg: ldo10 {
 650                                 regulator-compatible = "LDO10";
 651                                 regulator-name = "VMIPI_1.8V";
 652                                 regulator-min-microvolt = <1800000>;
 653                                 regulator-max-microvolt = <1800000>;
 654                                 regulator-state-mem {
 655                                         regulator-off-in-suspend;
 656                                 };
 657                         };
 658
 659                         ldo11_reg: ldo11 {
 660                                 regulator-compatible = "LDO11";
 661                                 regulator-name = "VABB1_1.95V";
 662                                 regulator-min-microvolt = <1950000>;
 663                                 regulator-max-microvolt = <1950000>;
 664                                 regulator-always-on;
 665                                 regulator-state-mem {
 666                                         regulator-off-in-suspend;
 667                                 };
 668                         };
 669
 670                         ldo12_reg: ldo12 {
 671                                 regulator-compatible = "LDO12";
 672                                 regulator-name = "VUOTG_3.0V";
 673                                 regulator-min-microvolt = <3000000>;
 674                                 regulator-max-microvolt = <3000000>;
 675                                 regulator-state-mem {
 676                                         regulator-off-in-suspend;
 677                                 };
 678                         };
 679
 680                         ldo13_reg: ldo13 {
 681                                 regulator-compatible = "LDO13";
 682                                 regulator-name = "NFC_AVDD_1.8V";
 683                                 regulator-min-microvolt = <1800000>;
 684                                 regulator-max-microvolt = <1800000>;
 685                         };
 686
 687                         ldo14_reg: ldo14 {
 688                                 regulator-compatible = "LDO14";
 689                                 regulator-name = "VABB2_1.95V";
 690                                 regulator-min-microvolt = <1950000>;
 691                                 regulator-max-microvolt = <1950000>;
 692                                 regulator-always-on;
 693                                 regulator-state-mem {
 694                                         regulator-off-in-suspend;
 695                                 };
 696                         };
 697
 698                         ldo15_reg: ldo15 {
 699                                 regulator-compatible = "LDO15";
 700                                 regulator-name = "VHSIC_1.0V";
 701                                 regulator-min-microvolt = <1000000>;
 702                                 regulator-max-microvolt = <1000000>;
 703                                 regulator-state-mem {
 704                                         regulator-on-in-suspend;
 705                                 };
 706                         };
 707
 708                         ldo16_reg: ldo16 {
 709                                 regulator-compatible = "LDO16";
 710                                 regulator-name = "VHSIC_1.8V";
 711                                 regulator-min-microvolt = <1800000>;
 712                                 regulator-max-microvolt = <1800000>;
 713                                 regulator-state-mem {
 714                                         regulator-on-in-suspend;
 715                                 };
 716                         };
 717
 718                         ldo17_reg: ldo17 {
 719                                 regulator-compatible = "LDO17";
 720                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 721                                 regulator-min-microvolt = <1200000>;
 722                                 regulator-max-microvolt = <1200000>;
 723                         };
 724
 725                         ldo18_reg: ldo18 {
 726                                 regulator-compatible = "LDO18";
 727                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 728                                 regulator-min-microvolt = <1800000>;
 729                                 regulator-max-microvolt = <1800000>;
 730                         };
 731
 732                         ldo19_reg: ldo19 {
 733                                 regulator-compatible = "LDO19";
 734                                 regulator-name = "VT_CAM_1.8V";
 735                                 regulator-min-microvolt = <1800000>;
 736                                 regulator-max-microvolt = <1800000>;
 737                         };
 738
 739                         ldo20_reg: ldo20 {
 740                                 regulator-compatible = "LDO20";
 741                                 regulator-name = "VDDQ_PRE_1.8V";
 742                                 regulator-min-microvolt = <1800000>;
 743                                 regulator-max-microvolt = <1800000>;
 744                         };
 745
 746                         ldo21_reg: ldo21 {
 747                                 regulator-compatible = "LDO21";
 748                                 regulator-name = "VTF_2.8V";
 749                                 regulator-min-microvolt = <2800000>;
 750                                 regulator-max-microvolt = <2800000>;
 751                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 752                         };
 753
 754                         ldo22_reg: ldo22 {
 755                                 regulator-compatible = "LDO22";
 756                                 regulator-name = "VMEM_VDD_2.8V";
 757                                 regulator-min-microvolt = <2800000>;
 758                                 regulator-max-microvolt = <2800000>;
 759                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 760                         };
 761
 762                         ldo23_reg: ldo23 {
 763                                 regulator-compatible = "LDO23";
 764                                 regulator-name = "TSP_AVDD_3.3V";
 765                                 regulator-min-microvolt = <3300000>;
 766                                 regulator-max-microvolt = <3300000>;
 767                         };
 768
 769                         ldo24_reg: ldo24 {
 770                                 regulator-compatible = "LDO24";
 771                                 regulator-name = "TSP_VDD_1.8V";
 772                                 regulator-min-microvolt = <1800000>;
 773                                 regulator-max-microvolt = <1800000>;
 774                         };
 775
 776                         ldo25_reg: ldo25 {
 777                                 regulator-compatible = "LDO25";
 778                                 regulator-name = "LCD_VCC_3.3V";
 779                                 regulator-min-microvolt = <2800000>;
 780                                 regulator-max-microvolt = <2800000>;
 781                         };
 782
 783                         ldo26_reg: ldo26 {
 784                                 regulator-compatible = "LDO26";
 785                                 regulator-name = "MOTOR_VCC_3.0V";
 786                                 regulator-min-microvolt = <3000000>;
 787                                 regulator-max-microvolt = <3000000>;
 788                         };
 789
 790                         buck1_reg: buck1 {
 791                                 regulator-compatible = "BUCK1";
 792                                 regulator-name = "vdd_mif";
 793                                 regulator-min-microvolt = <850000>;
 794                                 regulator-max-microvolt = <1100000>;
 795                                 regulator-always-on;
 796                                 regulator-boot-on;
 797                                 regulator-state-mem {
 798                                         regulator-off-in-suspend;
 799                                 };
 800                         };
 801
 802                         buck2_reg: buck2 {
 803                                 regulator-compatible = "BUCK2";
 804                                 regulator-name = "vdd_arm";
 805                                 regulator-min-microvolt = <850000>;
 806                                 regulator-max-microvolt = <1500000>;
 807                                 regulator-always-on;
 808                                 regulator-boot-on;
 809                                 regulator-state-mem {
 810                                         regulator-on-in-suspend;
 811                                 };
 812                         };
 813
 814                         buck3_reg: buck3 {
 815                                 regulator-compatible = "BUCK3";
 816                                 regulator-name = "vdd_int";
 817                                 regulator-min-microvolt = <850000>;
 818                                 regulator-max-microvolt = <1150000>;
 819                                 regulator-always-on;
 820                                 regulator-boot-on;
 821                                 regulator-state-mem {
 822                                         regulator-off-in-suspend;
 823                                 };
 824                         };
 825
 826                         buck4_reg: buck4 {
 827                                 regulator-compatible = "BUCK4";
 828                                 regulator-name = "vdd_g3d";
 829                                 regulator-min-microvolt = <850000>;
 830                                 regulator-max-microvolt = <1150000>;
 831                                 regulator-boot-on;
 832                                 regulator-state-mem {
 833                                         regulator-off-in-suspend;
 834                                 };
 835                         };
 836
 837                         buck5_reg: buck5 {
 838                                 regulator-compatible = "BUCK5";
 839                                 regulator-name = "VMEM_1.2V_AP";
 840                                 regulator-min-microvolt = <1200000>;
 841                                 regulator-max-microvolt = <1200000>;
 842                                 regulator-always-on;
 843                         };
 844
 845                         buck6_reg: buck6 {
 846                                 regulator-compatible = "BUCK6";
 847                                 regulator-name = "VCC_SUB_1.35V";
 848                                 regulator-min-microvolt = <1350000>;
 849                                 regulator-max-microvolt = <1350000>;
 850                                 regulator-always-on;
 851                         };
 852
 853                         buck7_reg: buck7 {
 854                                 regulator-compatible = "BUCK7";
 855                                 regulator-name = "VCC_SUB_2.0V";
 856                                 regulator-min-microvolt = <2000000>;
 857                                 regulator-max-microvolt = <2000000>;
 858                                 regulator-always-on;
 859                         };
 860
 861                         buck8_reg: buck8 {
 862                                 regulator-compatible = "BUCK8";
 863                                 regulator-name = "VMEM_VDDF_3.0V";
 864                                 regulator-min-microvolt = <2850000>;
 865                                 regulator-max-microvolt = <2850000>;
 866                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 867                         };
 868
 869                         buck9_reg: buck9 {
 870                                 regulator-compatible = "BUCK9";
 871                                 regulator-name = "CAM_ISP_CORE_1.2V";
 872                                 regulator-min-microvolt = <1000000>;
 873                                 regulator-max-microvolt = <1200000>;
 874                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 875                         };
 876                 };
 877         };
 878 };
 879
 880 &i2s0 {
 881         pinctrl-0 = <&i2s0_bus>;
 882         pinctrl-names = "default";
 883         status = "okay";
 884 };
 885
 886 &mshc_0 {
 887         num-slots = <1>;
 888         broken-cd;
 889         non-removable;
 890         card-detect-delay = <200>;
 891         vmmc-supply = <&ldo22_reg>;
 892         clock-frequency = <400000000>;
 893         samsung,dw-mshc-ciu-div = <0>;
 894         samsung,dw-mshc-sdr-timing = <2 3>;
 895         samsung,dw-mshc-ddr-timing = <1 2>;
 896         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 897         pinctrl-names = "default";
 898         status = "okay";
 899         bus-width = <8>;
 900         cap-mmc-highspeed;
 901 };
 902
 903 &pmu_system_controller {
 904         assigned-clocks = <&pmu_system_controller 0>;
 905         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 906 };
 907
 908 &ppmu_dmc0 {
 909         status = "okay";
 910
 911         events {
 912                 ppmu_dmc0_3: ppmu-event3-dmc0 {
 913                         event-name = "ppmu-event3-dmc0";
 914                 };
 915         };
 916 };
 917
 918 &ppmu_dmc1 {
 919         status = "okay";
 920
 921         events {
 922                 ppmu_dmc1_3: ppmu-event3-dmc1 {
 923                         event-name = "ppmu-event3-dmc1";
 924                 };
 925         };
 926 };
 927
 928 &ppmu_leftbus {
 929         status = "okay";
 930
 931         events {
 932                 ppmu_leftbus_3: ppmu-event3-leftbus {
 933                         event-name = "ppmu-event3-leftbus";
 934                 };
 935         };
 936 };
 937
 938 &ppmu_rightbus {
 939         status = "okay";
 940
 941         events {
 942                 ppmu_rightbus_3: ppmu-event3-rightbus {
 943                         event-name = "ppmu-event3-rightbus";
 944                 };
 945         };
 946 };
 947
 948 &pinctrl_0 {
 949         pinctrl-names = "default";
 950         pinctrl-0 = <&sleep0>;
 951
 952         sleep0: sleep-states {
 953                 PIN_SLP(gpa0-0, INPUT, NONE);
 954                 PIN_SLP(gpa0-1, OUT0, NONE);
 955                 PIN_SLP(gpa0-2, INPUT, NONE);
 956                 PIN_SLP(gpa0-3, INPUT, UP);
 957                 PIN_SLP(gpa0-4, INPUT, NONE);
 958                 PIN_SLP(gpa0-5, INPUT, DOWN);
 959                 PIN_SLP(gpa0-6, INPUT, DOWN);
 960                 PIN_SLP(gpa0-7, INPUT, UP);
 961
 962                 PIN_SLP(gpa1-0, INPUT, DOWN);
 963                 PIN_SLP(gpa1-1, INPUT, DOWN);
 964                 PIN_SLP(gpa1-2, INPUT, DOWN);
 965                 PIN_SLP(gpa1-3, INPUT, DOWN);
 966                 PIN_SLP(gpa1-4, INPUT, DOWN);
 967                 PIN_SLP(gpa1-5, INPUT, DOWN);
 968
 969                 PIN_SLP(gpb-0, INPUT, NONE);
 970                 PIN_SLP(gpb-1, INPUT, NONE);
 971                 PIN_SLP(gpb-2, INPUT, NONE);
 972                 PIN_SLP(gpb-3, INPUT, NONE);
 973                 PIN_SLP(gpb-4, INPUT, DOWN);
 974                 PIN_SLP(gpb-5, INPUT, UP);
 975                 PIN_SLP(gpb-6, INPUT, DOWN);
 976                 PIN_SLP(gpb-7, INPUT, DOWN);
 977
 978                 PIN_SLP(gpc0-0, INPUT, DOWN);
 979                 PIN_SLP(gpc0-1, INPUT, DOWN);
 980                 PIN_SLP(gpc0-2, INPUT, DOWN);
 981                 PIN_SLP(gpc0-3, INPUT, DOWN);
 982                 PIN_SLP(gpc0-4, INPUT, DOWN);
 983
 984                 PIN_SLP(gpc1-0, INPUT, NONE);
 985                 PIN_SLP(gpc1-1, PREV, NONE);
 986                 PIN_SLP(gpc1-2, INPUT, NONE);
 987                 PIN_SLP(gpc1-3, INPUT, NONE);
 988                 PIN_SLP(gpc1-4, INPUT, NONE);
 989
 990                 PIN_SLP(gpd0-0, INPUT, DOWN);
 991                 PIN_SLP(gpd0-1, INPUT, DOWN);
 992                 PIN_SLP(gpd0-2, INPUT, NONE);
 993                 PIN_SLP(gpd0-3, INPUT, NONE);
 994
 995                 PIN_SLP(gpd1-0, INPUT, DOWN);
 996                 PIN_SLP(gpd1-1, INPUT, DOWN);
 997                 PIN_SLP(gpd1-2, INPUT, NONE);
 998                 PIN_SLP(gpd1-3, INPUT, NONE);
 999
1000                 PIN_SLP(gpf0-0, INPUT, NONE);
1001                 PIN_SLP(gpf0-1, INPUT, NONE);
1002                 PIN_SLP(gpf0-2, INPUT, DOWN);
1003                 PIN_SLP(gpf0-3, INPUT, DOWN);
1004                 PIN_SLP(gpf0-4, INPUT, NONE);
1005                 PIN_SLP(gpf0-5, INPUT, DOWN);
1006                 PIN_SLP(gpf0-6, INPUT, NONE);
1007                 PIN_SLP(gpf0-7, INPUT, DOWN);
1008
1009                 PIN_SLP(gpf1-0, INPUT, DOWN);
1010                 PIN_SLP(gpf1-1, INPUT, DOWN);
1011                 PIN_SLP(gpf1-2, INPUT, DOWN);
1012                 PIN_SLP(gpf1-3, INPUT, DOWN);
1013                 PIN_SLP(gpf1-4, INPUT, NONE);
1014                 PIN_SLP(gpf1-5, INPUT, NONE);
1015                 PIN_SLP(gpf1-6, INPUT, DOWN);
1016                 PIN_SLP(gpf1-7, PREV, NONE);
1017
1018                 PIN_SLP(gpf2-0, PREV, NONE);
1019                 PIN_SLP(gpf2-1, INPUT, DOWN);
1020                 PIN_SLP(gpf2-2, INPUT, DOWN);
1021                 PIN_SLP(gpf2-3, INPUT, DOWN);
1022                 PIN_SLP(gpf2-4, INPUT, DOWN);
1023                 PIN_SLP(gpf2-5, INPUT, DOWN);
1024                 PIN_SLP(gpf2-6, INPUT, NONE);
1025                 PIN_SLP(gpf2-7, INPUT, NONE);
1026
1027                 PIN_SLP(gpf3-0, INPUT, NONE);
1028                 PIN_SLP(gpf3-1, PREV, NONE);
1029                 PIN_SLP(gpf3-2, PREV, NONE);
1030                 PIN_SLP(gpf3-3, PREV, NONE);
1031                 PIN_SLP(gpf3-4, OUT1, NONE);
1032                 PIN_SLP(gpf3-5, INPUT, DOWN);
1033
1034                 PIN_SLP(gpj0-0, PREV, NONE);
1035                 PIN_SLP(gpj0-1, PREV, NONE);
1036                 PIN_SLP(gpj0-2, PREV, NONE);
1037                 PIN_SLP(gpj0-3, INPUT, DOWN);
1038                 PIN_SLP(gpj0-4, PREV, NONE);
1039                 PIN_SLP(gpj0-5, PREV, NONE);
1040                 PIN_SLP(gpj0-6, INPUT, DOWN);
1041                 PIN_SLP(gpj0-7, INPUT, DOWN);
1042
1043                 PIN_SLP(gpj1-0, INPUT, DOWN);
1044                 PIN_SLP(gpj1-1, PREV, NONE);
1045                 PIN_SLP(gpj1-2, PREV, NONE);
1046                 PIN_SLP(gpj1-3, INPUT, DOWN);
1047                 PIN_SLP(gpj1-4, INPUT, DOWN);
1048         };
1049 };
1050
1051 &pinctrl_1 {
1052         pinctrl-names = "default";
1053         pinctrl-0 = <&sleep1>;
1054
1055         sleep1: sleep-states {
1056                 PIN_SLP(gpk0-0, PREV, NONE);
1057                 PIN_SLP(gpk0-1, PREV, NONE);
1058                 PIN_SLP(gpk0-2, OUT0, NONE);
1059                 PIN_SLP(gpk0-3, PREV, NONE);
1060                 PIN_SLP(gpk0-4, PREV, NONE);
1061                 PIN_SLP(gpk0-5, PREV, NONE);
1062                 PIN_SLP(gpk0-6, PREV, NONE);
1063
1064                 PIN_SLP(gpk1-0, INPUT, DOWN);
1065                 PIN_SLP(gpk1-1, INPUT, DOWN);
1066                 PIN_SLP(gpk1-2, INPUT, DOWN);
1067                 PIN_SLP(gpk1-3, PREV, NONE);
1068                 PIN_SLP(gpk1-4, PREV, NONE);
1069                 PIN_SLP(gpk1-5, PREV, NONE);
1070                 PIN_SLP(gpk1-6, PREV, NONE);
1071
1072                 PIN_SLP(gpk2-0, INPUT, DOWN);
1073                 PIN_SLP(gpk2-1, INPUT, DOWN);
1074                 PIN_SLP(gpk2-2, INPUT, DOWN);
1075                 PIN_SLP(gpk2-3, INPUT, DOWN);
1076                 PIN_SLP(gpk2-4, INPUT, DOWN);
1077                 PIN_SLP(gpk2-5, INPUT, DOWN);
1078                 PIN_SLP(gpk2-6, INPUT, DOWN);
1079
1080                 PIN_SLP(gpk3-0, OUT0, NONE);
1081                 PIN_SLP(gpk3-1, INPUT, NONE);
1082                 PIN_SLP(gpk3-2, INPUT, DOWN);
1083                 PIN_SLP(gpk3-3, INPUT, NONE);
1084                 PIN_SLP(gpk3-4, INPUT, NONE);
1085                 PIN_SLP(gpk3-5, INPUT, NONE);
1086                 PIN_SLP(gpk3-6, INPUT, NONE);
1087
1088                 PIN_SLP(gpl0-0, INPUT, DOWN);
1089                 PIN_SLP(gpl0-1, INPUT, DOWN);
1090                 PIN_SLP(gpl0-2, INPUT, DOWN);
1091                 PIN_SLP(gpl0-3, INPUT, DOWN);
1092                 PIN_SLP(gpl0-4, PREV, NONE);
1093                 PIN_SLP(gpl0-6, PREV, NONE);
1094
1095                 PIN_SLP(gpl1-0, INPUT, DOWN);
1096                 PIN_SLP(gpl1-1, INPUT, DOWN);
1097                 PIN_SLP(gpl2-0, INPUT, DOWN);
1098                 PIN_SLP(gpl2-1, INPUT, DOWN);
1099                 PIN_SLP(gpl2-2, INPUT, DOWN);
1100                 PIN_SLP(gpl2-3, INPUT, DOWN);
1101                 PIN_SLP(gpl2-4, INPUT, DOWN);
1102                 PIN_SLP(gpl2-5, INPUT, DOWN);
1103                 PIN_SLP(gpl2-6, PREV, NONE);
1104                 PIN_SLP(gpl2-7, INPUT, DOWN);
1105
1106                 PIN_SLP(gpm0-0, INPUT, DOWN);
1107                 PIN_SLP(gpm0-1, INPUT, DOWN);
1108                 PIN_SLP(gpm0-2, INPUT, DOWN);
1109                 PIN_SLP(gpm0-3, INPUT, DOWN);
1110                 PIN_SLP(gpm0-4, INPUT, DOWN);
1111                 PIN_SLP(gpm0-5, INPUT, DOWN);
1112                 PIN_SLP(gpm0-6, INPUT, DOWN);
1113                 PIN_SLP(gpm0-7, INPUT, DOWN);
1114
1115                 PIN_SLP(gpm1-0, INPUT, DOWN);
1116                 PIN_SLP(gpm1-1, INPUT, DOWN);
1117                 PIN_SLP(gpm1-2, INPUT, NONE);
1118                 PIN_SLP(gpm1-3, INPUT, NONE);
1119                 PIN_SLP(gpm1-4, INPUT, NONE);
1120                 PIN_SLP(gpm1-5, INPUT, NONE);
1121                 PIN_SLP(gpm1-6, INPUT, DOWN);
1122
1123                 PIN_SLP(gpm2-0, INPUT, NONE);
1124                 PIN_SLP(gpm2-1, INPUT, NONE);
1125                 PIN_SLP(gpm2-2, INPUT, DOWN);
1126                 PIN_SLP(gpm2-3, INPUT, DOWN);
1127                 PIN_SLP(gpm2-4, INPUT, DOWN);
1128
1129                 PIN_SLP(gpm3-0, PREV, NONE);
1130                 PIN_SLP(gpm3-1, PREV, NONE);
1131                 PIN_SLP(gpm3-2, PREV, NONE);
1132                 PIN_SLP(gpm3-3, OUT1, NONE);
1133                 PIN_SLP(gpm3-4, INPUT, DOWN);
1134                 PIN_SLP(gpm3-5, INPUT, DOWN);
1135                 PIN_SLP(gpm3-6, INPUT, DOWN);
1136                 PIN_SLP(gpm3-7, INPUT, DOWN);
1137
1138                 PIN_SLP(gpm4-0, INPUT, DOWN);
1139                 PIN_SLP(gpm4-1, INPUT, DOWN);
1140                 PIN_SLP(gpm4-2, INPUT, DOWN);
1141                 PIN_SLP(gpm4-3, INPUT, DOWN);
1142                 PIN_SLP(gpm4-4, INPUT, DOWN);
1143                 PIN_SLP(gpm4-5, INPUT, DOWN);
1144                 PIN_SLP(gpm4-6, INPUT, DOWN);
1145                 PIN_SLP(gpm4-7, INPUT, DOWN);
1146
1147                 PIN_SLP(gpy0-0, INPUT, DOWN);
1148                 PIN_SLP(gpy0-1, INPUT, DOWN);
1149                 PIN_SLP(gpy0-2, INPUT, DOWN);
1150                 PIN_SLP(gpy0-3, INPUT, DOWN);
1151                 PIN_SLP(gpy0-4, INPUT, DOWN);
1152                 PIN_SLP(gpy0-5, INPUT, DOWN);
1153
1154                 PIN_SLP(gpy1-0, INPUT, DOWN);
1155                 PIN_SLP(gpy1-1, INPUT, DOWN);
1156                 PIN_SLP(gpy1-2, INPUT, DOWN);
1157                 PIN_SLP(gpy1-3, INPUT, DOWN);
1158
1159                 PIN_SLP(gpy2-0, PREV, NONE);
1160                 PIN_SLP(gpy2-1, INPUT, DOWN);
1161                 PIN_SLP(gpy2-2, INPUT, NONE);
1162                 PIN_SLP(gpy2-3, INPUT, NONE);
1163                 PIN_SLP(gpy2-4, INPUT, NONE);
1164                 PIN_SLP(gpy2-5, INPUT, NONE);
1165
1166                 PIN_SLP(gpy3-0, INPUT, DOWN);
1167                 PIN_SLP(gpy3-1, INPUT, DOWN);
1168                 PIN_SLP(gpy3-2, INPUT, DOWN);
1169                 PIN_SLP(gpy3-3, INPUT, DOWN);
1170                 PIN_SLP(gpy3-4, INPUT, DOWN);
1171                 PIN_SLP(gpy3-5, INPUT, DOWN);
1172                 PIN_SLP(gpy3-6, INPUT, DOWN);
1173                 PIN_SLP(gpy3-7, INPUT, DOWN);
1174
1175                 PIN_SLP(gpy4-0, INPUT, DOWN);
1176                 PIN_SLP(gpy4-1, INPUT, DOWN);
1177                 PIN_SLP(gpy4-2, INPUT, DOWN);
1178                 PIN_SLP(gpy4-3, INPUT, DOWN);
1179                 PIN_SLP(gpy4-4, INPUT, DOWN);
1180                 PIN_SLP(gpy4-5, INPUT, DOWN);
1181                 PIN_SLP(gpy4-6, INPUT, DOWN);
1182                 PIN_SLP(gpy4-7, INPUT, DOWN);
1183
1184                 PIN_SLP(gpy5-0, INPUT, DOWN);
1185                 PIN_SLP(gpy5-1, INPUT, DOWN);
1186                 PIN_SLP(gpy5-2, INPUT, DOWN);
1187                 PIN_SLP(gpy5-3, INPUT, DOWN);
1188                 PIN_SLP(gpy5-4, INPUT, DOWN);
1189                 PIN_SLP(gpy5-5, INPUT, DOWN);
1190                 PIN_SLP(gpy5-6, INPUT, DOWN);
1191                 PIN_SLP(gpy5-7, INPUT, DOWN);
1192
1193                 PIN_SLP(gpy6-0, INPUT, DOWN);
1194                 PIN_SLP(gpy6-1, INPUT, DOWN);
1195                 PIN_SLP(gpy6-2, INPUT, DOWN);
1196                 PIN_SLP(gpy6-3, INPUT, DOWN);
1197                 PIN_SLP(gpy6-4, INPUT, DOWN);
1198                 PIN_SLP(gpy6-5, INPUT, DOWN);
1199                 PIN_SLP(gpy6-6, INPUT, DOWN);
1200                 PIN_SLP(gpy6-7, INPUT, DOWN);
1201         };
1202 };
1203
1204 &pinctrl_2 {
1205         pinctrl-names = "default";
1206         pinctrl-0 = <&sleep2>;
1207
1208         sleep2: sleep-states {
1209                 PIN_SLP(gpz-0, INPUT, DOWN);
1210                 PIN_SLP(gpz-1, INPUT, DOWN);
1211                 PIN_SLP(gpz-2, INPUT, DOWN);
1212                 PIN_SLP(gpz-3, INPUT, DOWN);
1213                 PIN_SLP(gpz-4, INPUT, DOWN);
1214                 PIN_SLP(gpz-5, INPUT, DOWN);
1215                 PIN_SLP(gpz-6, INPUT, DOWN);
1216         };
1217 };
1218
1219 &pinctrl_3 {
1220         pinctrl-names = "default";
1221         pinctrl-0 = <&sleep3>;
1222
1223         sleep3: sleep-states {
1224                 PIN_SLP(gpv0-0, INPUT, DOWN);
1225                 PIN_SLP(gpv0-1, INPUT, DOWN);
1226                 PIN_SLP(gpv0-2, INPUT, DOWN);
1227                 PIN_SLP(gpv0-3, INPUT, DOWN);
1228                 PIN_SLP(gpv0-4, INPUT, DOWN);
1229                 PIN_SLP(gpv0-5, INPUT, DOWN);
1230                 PIN_SLP(gpv0-6, INPUT, DOWN);
1231                 PIN_SLP(gpv0-7, INPUT, DOWN);
1232
1233                 PIN_SLP(gpv1-0, INPUT, DOWN);
1234                 PIN_SLP(gpv1-1, INPUT, DOWN);
1235                 PIN_SLP(gpv1-2, INPUT, DOWN);
1236                 PIN_SLP(gpv1-3, INPUT, DOWN);
1237                 PIN_SLP(gpv1-4, INPUT, DOWN);
1238                 PIN_SLP(gpv1-5, INPUT, DOWN);
1239                 PIN_SLP(gpv1-6, INPUT, DOWN);
1240                 PIN_SLP(gpv1-7, INPUT, DOWN);
1241
1242                 PIN_SLP(gpv2-0, INPUT, DOWN);
1243                 PIN_SLP(gpv2-1, INPUT, DOWN);
1244                 PIN_SLP(gpv2-2, INPUT, DOWN);
1245                 PIN_SLP(gpv2-3, INPUT, DOWN);
1246                 PIN_SLP(gpv2-4, INPUT, DOWN);
1247                 PIN_SLP(gpv2-5, INPUT, DOWN);
1248                 PIN_SLP(gpv2-6, INPUT, DOWN);
1249                 PIN_SLP(gpv2-7, INPUT, DOWN);
1250
1251                 PIN_SLP(gpv3-0, INPUT, DOWN);
1252                 PIN_SLP(gpv3-1, INPUT, DOWN);
1253                 PIN_SLP(gpv3-2, INPUT, DOWN);
1254                 PIN_SLP(gpv3-3, INPUT, DOWN);
1255                 PIN_SLP(gpv3-4, INPUT, DOWN);
1256                 PIN_SLP(gpv3-5, INPUT, DOWN);
1257                 PIN_SLP(gpv3-6, INPUT, DOWN);
1258                 PIN_SLP(gpv3-7, INPUT, DOWN);
1259
1260                 PIN_SLP(gpv4-0, INPUT, DOWN);
1261         };
1262 };
1263
1264 &pwm {
1265         pinctrl-0 = <&pwm0_out>;
1266         pinctrl-names = "default";
1267         samsung,pwm-outputs = <0>;
1268         status = "okay";
1269 };
1270
1271 &rtc {
1272         status = "okay";
1273         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1274         clock-names = "rtc", "rtc_src";
1275 };
1276
1277 &sdhci_2 {
1278         bus-width = <4>;
1279         cd-gpios = <&gpx3 4 0>;
1280         cd-inverted;
1281         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1282         pinctrl-names = "default";
1283         vmmc-supply = <&ldo21_reg>;
1284         status = "okay";
1285 };
1286
1287 &serial_0 {
1288         status = "okay";
1289 };
1290
1291 &serial_1 {
1292         status = "okay";
1293 };
1294
1295 &serial_2 {
1296         status = "okay";
1297 };
1298
1299 &serial_3 {
1300         status = "okay";
1301 };
1302
1303 &spi_1 {
1304         pinctrl-names = "default";
1305         pinctrl-0 = <&spi1_bus>;
1306         cs-gpios = <&gpb 5 0>;
1307         status = "okay";
1308
1309         s5c73m3_spi: s5c73m3 {
1310                 compatible = "samsung,s5c73m3";
1311                 spi-max-frequency = <50000000>;
1312                 reg = <0>;
1313                 controller-data {
1314                         samsung,spi-feedback-delay = <2>;
1315                 };
1316         };
1317 };
1318
1319 &tmu {
1320         vtmu-supply = <&ldo10_reg>;
1321         status = "okay";
1322 };