arch/arm/boot/dts/imx27.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         aliases {
  16                 serial0 = &uart1;
  17                 serial1 = &uart2;
  18                 serial2 = &uart3;
  19                 serial3 = &uart4;
  20                 serial4 = &uart5;
  21                 serial5 = &uart6;
  22         };
  23
  24         avic: avic-interrupt-controller@e0000000 {
  25                 compatible = "fsl,imx27-avic", "fsl,avic";
  26                 interrupt-controller;
  27                 #interrupt-cells = <1>;
  28                 reg = <0x10040000 0x1000>;
  29         };
  30
  31         clocks {
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34
  35                 osc26m {
  36                         compatible = "fsl,imx-osc26m", "fixed-clock";
  37                         clock-frequency = <26000000>;
  38                 };
  39         };
  40
  41         soc {
  42                 #address-cells = <1>;
  43                 #size-cells = <1>;
  44                 compatible = "simple-bus";
  45                 interrupt-parent = <&avic>;
  46                 ranges;
  47
  48                 aipi@10000000 { /* AIPI1 */
  49                         compatible = "fsl,aipi-bus", "simple-bus";
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52                         reg = <0x10000000 0x10000000>;
  53                         ranges;
  54
  55                         wdog@10002000 {
  56                                 compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
  57                                 reg = <0x10002000 0x4000>;
  58                                 interrupts = <27>;
  59                                 status = "disabled";
  60                         };
  61
  62                         uart1: serial@1000a000 {
  63                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  64                                 reg = <0x1000a000 0x1000>;
  65                                 interrupts = <20>;
  66                                 status = "disabled";
  67                         };
  68
  69                         uart2: serial@1000b000 {
  70                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  71                                 reg = <0x1000b000 0x1000>;
  72                                 interrupts = <19>;
  73                                 status = "disabled";
  74                         };
  75
  76                         uart3: serial@1000c000 {
  77                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  78                                 reg = <0x1000c000 0x1000>;
  79                                 interrupts = <18>;
  80                                 status = "disabled";
  81                         };
  82
  83                         uart4: serial@1000d000 {
  84                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  85                                 reg = <0x1000d000 0x1000>;
  86                                 interrupts = <17>;
  87                                 status = "disabled";
  88                         };
  89
  90                         cspi1: cspi@1000e000 {
  91                                 #address-cells = <1>;
  92                                 #size-cells = <0>;
  93                                 compatible = "fsl,imx27-cspi";
  94                                 reg = <0x1000e000 0x1000>;
  95                                 interrupts = <16>;
  96                                 status = "disabled";
  97                         };
  98
  99                         cspi2: cspi@1000f000 {
 100                                 #address-cells = <1>;
 101                                 #size-cells = <0>;
 102                                 compatible = "fsl,imx27-cspi";
 103                                 reg = <0x1000f000 0x1000>;
 104                                 interrupts = <15>;
 105                                 status = "disabled";
 106                         };
 107
 108                         i2c1: i2c@10012000 {
 109                                 #address-cells = <1>;
 110                                 #size-cells = <0>;
 111                                 compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
 112                                 reg = <0x10012000 0x1000>;
 113                                 interrupts = <12>;
 114                                 status = "disabled";
 115                         };
 116
 117                         gpio1: gpio@10015000 {
 118                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 119                                 reg = <0x10015000 0x100>;
 120                                 interrupts = <8>;
 121                                 gpio-controller;
 122                                 #gpio-cells = <2>;
 123                                 interrupt-controller;
 124                                 #interrupt-cells = <1>;
 125                         };
 126
 127                         gpio2: gpio@10015100 {
 128                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 129                                 reg = <0x10015100 0x100>;
 130                                 interrupts = <8>;
 131                                 gpio-controller;
 132                                 #gpio-cells = <2>;
 133                                 interrupt-controller;
 134                                 #interrupt-cells = <1>;
 135                         };
 136
 137                         gpio3: gpio@10015200 {
 138                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 139                                 reg = <0x10015200 0x100>;
 140                                 interrupts = <8>;
 141                                 gpio-controller;
 142                                 #gpio-cells = <2>;
 143                                 interrupt-controller;
 144                                 #interrupt-cells = <1>;
 145                         };
 146
 147                         gpio4: gpio@10015300 {
 148                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 149                                 reg = <0x10015300 0x100>;
 150                                 interrupts = <8>;
 151                                 gpio-controller;
 152                                 #gpio-cells = <2>;
 153                                 interrupt-controller;
 154                                 #interrupt-cells = <1>;
 155                         };
 156
 157                         gpio5: gpio@10015400 {
 158                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 159                                 reg = <0x10015400 0x100>;
 160                                 interrupts = <8>;
 161                                 gpio-controller;
 162                                 #gpio-cells = <2>;
 163                                 interrupt-controller;
 164                                 #interrupt-cells = <1>;
 165                         };
 166
 167                         gpio6: gpio@10015500 {
 168                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 169                                 reg = <0x10015500 0x100>;
 170                                 interrupts = <8>;
 171                                 gpio-controller;
 172                                 #gpio-cells = <2>;
 173                                 interrupt-controller;
 174                                 #interrupt-cells = <1>;
 175                         };
 176
 177                         cspi3: cspi@10017000 {
 178                                 #address-cells = <1>;
 179                                 #size-cells = <0>;
 180                                 compatible = "fsl,imx27-cspi";
 181                                 reg = <0x10017000 0x1000>;
 182                                 interrupts = <6>;
 183                                 status = "disabled";
 184                         };
 185
 186                         uart5: serial@1001b000 {
 187                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 188                                 reg = <0x1001b000 0x1000>;
 189                                 interrupts = <49>;
 190                                 status = "disabled";
 191                         };
 192
 193                         uart6: serial@1001c000 {
 194                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 195                                 reg = <0x1001c000 0x1000>;
 196                                 interrupts = <48>;
 197                                 status = "disabled";
 198                         };
 199
 200                         i2c2: i2c@1001d000 {
 201                                 #address-cells = <1>;
 202                                 #size-cells = <0>;
 203                                 compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
 204                                 reg = <0x1001d000 0x1000>;
 205                                 interrupts = <1>;
 206                                 status = "disabled";
 207                         };
 208
 209                         fec: ethernet@1002b000 {
 210                                 compatible = "fsl,imx27-fec";
 211                                 reg = <0x1002b000 0x4000>;
 212                                 interrupts = <50>;
 213                                 status = "disabled";
 214                         };
 215                 };
 216                 nand@d8000000 {
 217                         #address-cells = <1>;
 218                         #size-cells = <1>;
 219
 220                         compatible = "fsl,imx27-nand";
 221                         reg = <0xd8000000 0x1000>;
 222                         interrupts = <29>;
 223                         status = "disabled";
 224                 };
 225         };
 226 };