arch/arm/boot/dts/imx53.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include "skeleton.dtsi"
  14 #include "imx53-pinfunc.h"
  15 #include <dt-bindings/clock/imx5-clock.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/input/input.h>
  18
  19 / {
  20         aliases {
  21                 ethernet0 = &fec;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28                 gpio6 = &gpio7;
  29                 i2c0 = &i2c1;
  30                 i2c1 = &i2c2;
  31                 i2c2 = &i2c3;
  32                 mmc0 = &esdhc1;
  33                 mmc1 = &esdhc2;
  34                 mmc2 = &esdhc3;
  35                 mmc3 = &esdhc4;
  36                 serial0 = &uart1;
  37                 serial1 = &uart2;
  38                 serial2 = &uart3;
  39                 serial3 = &uart4;
  40                 serial4 = &uart5;
  41                 spi0 = &ecspi1;
  42                 spi1 = &ecspi2;
  43                 spi2 = &cspi;
  44         };
  45
  46         cpus {
  47                 #address-cells = <1>;
  48                 #size-cells = <0>;
  49                 cpu0: cpu@0 {
  50                         device_type = "cpu";
  51                         compatible = "arm,cortex-a8";
  52                         reg = <0x0>;
  53                         clocks = <&clks IMX5_CLK_ARM>;
  54                         clock-latency = <61036>;
  55                         voltage-tolerance = <5>;
  56                         operating-points = <
  57                                 /* kHz */
  58                                  166666  850000
  59                                  400000  900000
  60                                  800000 1050000
  61                                 1000000 1200000
  62                                 1200000 1300000
  63                         >;
  64                 };
  65         };
  66
  67         display-subsystem {
  68                 compatible = "fsl,imx-display-subsystem";
  69                 ports = <&ipu_di0>, <&ipu_di1>;
  70         };
  71
  72         tzic: tz-interrupt-controller@0fffc000 {
  73                 compatible = "fsl,imx53-tzic", "fsl,tzic";
  74                 interrupt-controller;
  75                 #interrupt-cells = <1>;
  76                 reg = <0x0fffc000 0x4000>;
  77         };
  78
  79         clocks {
  80                 #address-cells = <1>;
  81                 #size-cells = <0>;
  82
  83                 ckil {
  84                         compatible = "fsl,imx-ckil", "fixed-clock";
  85                         #clock-cells = <0>;
  86                         clock-frequency = <32768>;
  87                 };
  88
  89                 ckih1 {
  90                         compatible = "fsl,imx-ckih1", "fixed-clock";
  91                         #clock-cells = <0>;
  92                         clock-frequency = <22579200>;
  93                 };
  94
  95                 ckih2 {
  96                         compatible = "fsl,imx-ckih2", "fixed-clock";
  97                         #clock-cells = <0>;
  98                         clock-frequency = <0>;
  99                 };
 100
 101                 osc {
 102                         compatible = "fsl,imx-osc", "fixed-clock";
 103                         #clock-cells = <0>;
 104                         clock-frequency = <24000000>;
 105                 };
 106         };
 107
 108         soc {
 109                 #address-cells = <1>;
 110                 #size-cells = <1>;
 111                 compatible = "simple-bus";
 112                 interrupt-parent = <&tzic>;
 113                 ranges;
 114
 115                 sata: sata@10000000 {
 116                         compatible = "fsl,imx53-ahci";
 117                         reg = <0x10000000 0x1000>;
 118                         interrupts = <28>;
 119                         clocks = <&clks IMX5_CLK_SATA_GATE>,
 120                                  <&clks IMX5_CLK_SATA_REF>,
 121                                  <&clks IMX5_CLK_AHB>;
 122                         clock-names = "sata", "sata_ref", "ahb";
 123                         status = "disabled";
 124                 };
 125
 126                 ipu: ipu@18000000 {
 127                         #address-cells = <1>;
 128                         #size-cells = <0>;
 129                         compatible = "fsl,imx53-ipu";
 130                         reg = <0x18000000 0x08000000>;
 131                         interrupts = <11 10>;
 132                         clocks = <&clks IMX5_CLK_IPU_GATE>,
 133                                  <&clks IMX5_CLK_IPU_DI0_GATE>,
 134                                  <&clks IMX5_CLK_IPU_DI1_GATE>;
 135                         clock-names = "bus", "di0", "di1";
 136                         resets = <&src 2>;
 137
 138                         ipu_di0: port@2 {
 139                                 #address-cells = <1>;
 140                                 #size-cells = <0>;
 141                                 reg = <2>;
 142
 143                                 ipu_di0_disp0: endpoint@0 {
 144                                         reg = <0>;
 145                                 };
 146
 147                                 ipu_di0_lvds0: endpoint@1 {
 148                                         reg = <1>;
 149                                         remote-endpoint = <&lvds0_in>;
 150                                 };
 151                         };
 152
 153                         ipu_di1: port@3 {
 154                                 #address-cells = <1>;
 155                                 #size-cells = <0>;
 156                                 reg = <3>;
 157
 158                                 ipu_di1_disp1: endpoint@0 {
 159                                         reg = <0>;
 160                                 };
 161
 162                                 ipu_di1_lvds1: endpoint@1 {
 163                                         reg = <1>;
 164                                         remote-endpoint = <&lvds1_in>;
 165                                 };
 166
 167                                 ipu_di1_tve: endpoint@2 {
 168                                         reg = <2>;
 169                                         remote-endpoint = <&tve_in>;
 170                                 };
 171                         };
 172                 };
 173
 174                 aips@50000000 { /* AIPS1 */
 175                         compatible = "fsl,aips-bus", "simple-bus";
 176                         #address-cells = <1>;
 177                         #size-cells = <1>;
 178                         reg = <0x50000000 0x10000000>;
 179                         ranges;
 180
 181                         spba@50000000 {
 182                                 compatible = "fsl,spba-bus", "simple-bus";
 183                                 #address-cells = <1>;
 184                                 #size-cells = <1>;
 185                                 reg = <0x50000000 0x40000>;
 186                                 ranges;
 187
 188                                 esdhc1: esdhc@50004000 {
 189                                         compatible = "fsl,imx53-esdhc";
 190                                         reg = <0x50004000 0x4000>;
 191                                         interrupts = <1>;
 192                                         clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
 193                                                  <&clks IMX5_CLK_DUMMY>,
 194                                                  <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 195                                         clock-names = "ipg", "ahb", "per";
 196                                         bus-width = <4>;
 197                                         status = "disabled";
 198                                 };
 199
 200                                 esdhc2: esdhc@50008000 {
 201                                         compatible = "fsl,imx53-esdhc";
 202                                         reg = <0x50008000 0x4000>;
 203                                         interrupts = <2>;
 204                                         clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
 205                                                  <&clks IMX5_CLK_DUMMY>,
 206                                                  <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 207                                         clock-names = "ipg", "ahb", "per";
 208                                         bus-width = <4>;
 209                                         status = "disabled";
 210                                 };
 211
 212                                 uart3: serial@5000c000 {
 213                                         compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 214                                         reg = <0x5000c000 0x4000>;
 215                                         interrupts = <33>;
 216                                         clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 217                                                  <&clks IMX5_CLK_UART3_PER_GATE>;
 218                                         clock-names = "ipg", "per";
 219                                         status = "disabled";
 220                                 };
 221
 222                                 ecspi1: ecspi@50010000 {
 223                                         #address-cells = <1>;
 224                                         #size-cells = <0>;
 225                                         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 226                                         reg = <0x50010000 0x4000>;
 227                                         interrupts = <36>;
 228                                         clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
 229                                                  <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 230                                         clock-names = "ipg", "per";
 231                                         status = "disabled";
 232                                 };
 233
 234                                 ssi2: ssi@50014000 {
 235                                         #sound-dai-cells = <0>;
 236                                         compatible = "fsl,imx53-ssi",
 237                                                         "fsl,imx51-ssi",
 238                                                         "fsl,imx21-ssi";
 239                                         reg = <0x50014000 0x4000>;
 240                                         interrupts = <30>;
 241                                         clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
 242                                                  <&clks IMX5_CLK_SSI2_ROOT_GATE>;
 243                                         clock-names = "ipg", "baud";
 244                                         dmas = <&sdma 24 1 0>,
 245                                                <&sdma 25 1 0>;
 246                                         dma-names = "rx", "tx";
 247                                         fsl,fifo-depth = <15>;
 248                                         status = "disabled";
 249                                 };
 250
 251                                 esdhc3: esdhc@50020000 {
 252                                         compatible = "fsl,imx53-esdhc";
 253                                         reg = <0x50020000 0x4000>;
 254                                         interrupts = <3>;
 255                                         clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
 256                                                  <&clks IMX5_CLK_DUMMY>,
 257                                                  <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 258                                         clock-names = "ipg", "ahb", "per";
 259                                         bus-width = <4>;
 260                                         status = "disabled";
 261                                 };
 262
 263                                 esdhc4: esdhc@50024000 {
 264                                         compatible = "fsl,imx53-esdhc";
 265                                         reg = <0x50024000 0x4000>;
 266                                         interrupts = <4>;
 267                                         clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
 268                                                  <&clks IMX5_CLK_DUMMY>,
 269                                                  <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 270                                         clock-names = "ipg", "ahb", "per";
 271                                         bus-width = <4>;
 272                                         status = "disabled";
 273                                 };
 274                         };
 275
 276                         aipstz1: bridge@53f00000 {
 277                                 compatible = "fsl,imx53-aipstz";
 278                                 reg = <0x53f00000 0x60>;
 279                         };
 280
 281                         usbphy0: usbphy@0 {
 282                                 compatible = "usb-nop-xceiv";
 283                                 clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 284                                 clock-names = "main_clk";
 285                                 status = "okay";
 286                         };
 287
 288                         usbphy1: usbphy@1 {
 289                                 compatible = "usb-nop-xceiv";
 290                                 clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 291                                 clock-names = "main_clk";
 292                                 status = "okay";
 293                         };
 294
 295                         usbotg: usb@53f80000 {
 296                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 297                                 reg = <0x53f80000 0x0200>;
 298                                 interrupts = <18>;
 299                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 300                                 fsl,usbmisc = <&usbmisc 0>;
 301                                 fsl,usbphy = <&usbphy0>;
 302                                 status = "disabled";
 303                         };
 304
 305                         usbh1: usb@53f80200 {
 306                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 307                                 reg = <0x53f80200 0x0200>;
 308                                 interrupts = <14>;
 309                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 310                                 fsl,usbmisc = <&usbmisc 1>;
 311                                 fsl,usbphy = <&usbphy1>;
 312                                 dr_mode = "host";
 313                                 status = "disabled";
 314                         };
 315
 316                         usbh2: usb@53f80400 {
 317                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 318                                 reg = <0x53f80400 0x0200>;
 319                                 interrupts = <16>;
 320                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 321                                 fsl,usbmisc = <&usbmisc 2>;
 322                                 dr_mode = "host";
 323                                 status = "disabled";
 324                         };
 325
 326                         usbh3: usb@53f80600 {
 327                                 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 328                                 reg = <0x53f80600 0x0200>;
 329                                 interrupts = <17>;
 330                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 331                                 fsl,usbmisc = <&usbmisc 3>;
 332                                 dr_mode = "host";
 333                                 status = "disabled";
 334                         };
 335
 336                         usbmisc: usbmisc@53f80800 {
 337                                 #index-cells = <1>;
 338                                 compatible = "fsl,imx53-usbmisc";
 339                                 reg = <0x53f80800 0x200>;
 340                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 341                         };
 342
 343                         gpio1: gpio@53f84000 {
 344                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 345                                 reg = <0x53f84000 0x4000>;
 346                                 interrupts = <50 51>;
 347                                 gpio-controller;
 348                                 #gpio-cells = <2>;
 349                                 interrupt-controller;
 350                                 #interrupt-cells = <2>;
 351                         };
 352
 353                         gpio2: gpio@53f88000 {
 354                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 355                                 reg = <0x53f88000 0x4000>;
 356                                 interrupts = <52 53>;
 357                                 gpio-controller;
 358                                 #gpio-cells = <2>;
 359                                 interrupt-controller;
 360                                 #interrupt-cells = <2>;
 361                         };
 362
 363                         gpio3: gpio@53f8c000 {
 364                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 365                                 reg = <0x53f8c000 0x4000>;
 366                                 interrupts = <54 55>;
 367                                 gpio-controller;
 368                                 #gpio-cells = <2>;
 369                                 interrupt-controller;
 370                                 #interrupt-cells = <2>;
 371                         };
 372
 373                         gpio4: gpio@53f90000 {
 374                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 375                                 reg = <0x53f90000 0x4000>;
 376                                 interrupts = <56 57>;
 377                                 gpio-controller;
 378                                 #gpio-cells = <2>;
 379                                 interrupt-controller;
 380                                 #interrupt-cells = <2>;
 381                         };
 382
 383                         kpp: kpp@53f94000 {
 384                                 compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
 385                                 reg = <0x53f94000 0x4000>;
 386                                 interrupts = <60>;
 387                                 clocks = <&clks IMX5_CLK_DUMMY>;
 388                                 status = "disabled";
 389                         };
 390
 391                         wdog1: wdog@53f98000 {
 392                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 393                                 reg = <0x53f98000 0x4000>;
 394                                 interrupts = <58>;
 395                                 clocks = <&clks IMX5_CLK_DUMMY>;
 396                         };
 397
 398                         wdog2: wdog@53f9c000 {
 399                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 400                                 reg = <0x53f9c000 0x4000>;
 401                                 interrupts = <59>;
 402                                 clocks = <&clks IMX5_CLK_DUMMY>;
 403                                 status = "disabled";
 404                         };
 405
 406                         gpt: timer@53fa0000 {
 407                                 compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
 408                                 reg = <0x53fa0000 0x4000>;
 409                                 interrupts = <39>;
 410                                 clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
 411                                          <&clks IMX5_CLK_GPT_HF_GATE>;
 412                                 clock-names = "ipg", "per";
 413                         };
 414
 415                         iomuxc: iomuxc@53fa8000 {
 416                                 compatible = "fsl,imx53-iomuxc";
 417                                 reg = <0x53fa8000 0x4000>;
 418                         };
 419
 420                         gpr: iomuxc-gpr@53fa8000 {
 421                                 compatible = "fsl,imx53-iomuxc-gpr", "syscon";
 422                                 reg = <0x53fa8000 0xc>;
 423                         };
 424
 425                         ldb: ldb@53fa8008 {
 426                                 #address-cells = <1>;
 427                                 #size-cells = <0>;
 428                                 compatible = "fsl,imx53-ldb";
 429                                 reg = <0x53fa8008 0x4>;
 430                                 gpr = <&gpr>;
 431                                 clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
 432                                          <&clks IMX5_CLK_LDB_DI1_SEL>,
 433                                          <&clks IMX5_CLK_IPU_DI0_SEL>,
 434                                          <&clks IMX5_CLK_IPU_DI1_SEL>,
 435                                          <&clks IMX5_CLK_LDB_DI0_GATE>,
 436                                          <&clks IMX5_CLK_LDB_DI1_GATE>;
 437                                 clock-names = "di0_pll", "di1_pll",
 438                                               "di0_sel", "di1_sel",
 439                                               "di0", "di1";
 440                                 status = "disabled";
 441
 442                                 lvds-channel@0 {
 443                                         #address-cells = <1>;
 444                                         #size-cells = <0>;
 445                                         reg = <0>;
 446                                         status = "disabled";
 447
 448                                         port@0 {
 449                                                 reg = <0>;
 450
 451                                                 lvds0_in: endpoint {
 452                                                         remote-endpoint = <&ipu_di0_lvds0>;
 453                                                 };
 454                                         };
 455                                 };
 456
 457                                 lvds-channel@1 {
 458                                         #address-cells = <1>;
 459                                         #size-cells = <0>;
 460                                         reg = <1>;
 461                                         status = "disabled";
 462
 463                                         port@1 {
 464                                                 reg = <1>;
 465
 466                                                 lvds1_in: endpoint {
 467                                                         remote-endpoint = <&ipu_di1_lvds1>;
 468                                                 };
 469                                         };
 470                                 };
 471                         };
 472
 473                         pwm1: pwm@53fb4000 {
 474                                 #pwm-cells = <2>;
 475                                 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 476                                 reg = <0x53fb4000 0x4000>;
 477                                 clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
 478                                          <&clks IMX5_CLK_PWM1_HF_GATE>;
 479                                 clock-names = "ipg", "per";
 480                                 interrupts = <61>;
 481                         };
 482
 483                         pwm2: pwm@53fb8000 {
 484                                 #pwm-cells = <2>;
 485                                 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 486                                 reg = <0x53fb8000 0x4000>;
 487                                 clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
 488                                          <&clks IMX5_CLK_PWM2_HF_GATE>;
 489                                 clock-names = "ipg", "per";
 490                                 interrupts = <94>;
 491                         };
 492
 493                         uart1: serial@53fbc000 {
 494                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 495                                 reg = <0x53fbc000 0x4000>;
 496                                 interrupts = <31>;
 497                                 clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 498                                          <&clks IMX5_CLK_UART1_PER_GATE>;
 499                                 clock-names = "ipg", "per";
 500                                 status = "disabled";
 501                         };
 502
 503                         uart2: serial@53fc0000 {
 504                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 505                                 reg = <0x53fc0000 0x4000>;
 506                                 interrupts = <32>;
 507                                 clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 508                                          <&clks IMX5_CLK_UART2_PER_GATE>;
 509                                 clock-names = "ipg", "per";
 510                                 status = "disabled";
 511                         };
 512
 513                         can1: can@53fc8000 {
 514                                 compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 515                                 reg = <0x53fc8000 0x4000>;
 516                                 interrupts = <82>;
 517                                 clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
 518                                          <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 519                                 clock-names = "ipg", "per";
 520                                 status = "disabled";
 521                         };
 522
 523                         can2: can@53fcc000 {
 524                                 compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 525                                 reg = <0x53fcc000 0x4000>;
 526                                 interrupts = <83>;
 527                                 clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
 528                                          <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
 529                                 clock-names = "ipg", "per";
 530                                 status = "disabled";
 531                         };
 532
 533                         src: src@53fd0000 {
 534                                 compatible = "fsl,imx53-src", "fsl,imx51-src";
 535                                 reg = <0x53fd0000 0x4000>;
 536                                 #reset-cells = <1>;
 537                         };
 538
 539                         clks: ccm@53fd4000{
 540                                 compatible = "fsl,imx53-ccm";
 541                                 reg = <0x53fd4000 0x4000>;
 542                                 interrupts = <0 71 0x04 0 72 0x04>;
 543                                 #clock-cells = <1>;
 544                         };
 545
 546                         gpio5: gpio@53fdc000 {
 547                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 548                                 reg = <0x53fdc000 0x4000>;
 549                                 interrupts = <103 104>;
 550                                 gpio-controller;
 551                                 #gpio-cells = <2>;
 552                                 interrupt-controller;
 553                                 #interrupt-cells = <2>;
 554                         };
 555
 556                         gpio6: gpio@53fe0000 {
 557                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 558                                 reg = <0x53fe0000 0x4000>;
 559                                 interrupts = <105 106>;
 560                                 gpio-controller;
 561                                 #gpio-cells = <2>;
 562                                 interrupt-controller;
 563                                 #interrupt-cells = <2>;
 564                         };
 565
 566                         gpio7: gpio@53fe4000 {
 567                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 568                                 reg = <0x53fe4000 0x4000>;
 569                                 interrupts = <107 108>;
 570                                 gpio-controller;
 571                                 #gpio-cells = <2>;
 572                                 interrupt-controller;
 573                                 #interrupt-cells = <2>;
 574                         };
 575
 576                         i2c3: i2c@53fec000 {
 577                                 #address-cells = <1>;
 578                                 #size-cells = <0>;
 579                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 580                                 reg = <0x53fec000 0x4000>;
 581                                 interrupts = <64>;
 582                                 clocks = <&clks IMX5_CLK_I2C3_GATE>;
 583                                 status = "disabled";
 584                         };
 585
 586                         uart4: serial@53ff0000 {
 587                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 588                                 reg = <0x53ff0000 0x4000>;
 589                                 interrupts = <13>;
 590                                 clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
 591                                          <&clks IMX5_CLK_UART4_PER_GATE>;
 592                                 clock-names = "ipg", "per";
 593                                 status = "disabled";
 594                         };
 595                 };
 596
 597                 aips@60000000 { /* AIPS2 */
 598                         compatible = "fsl,aips-bus", "simple-bus";
 599                         #address-cells = <1>;
 600                         #size-cells = <1>;
 601                         reg = <0x60000000 0x10000000>;
 602                         ranges;
 603
 604                         aipstz2: bridge@63f00000 {
 605                                 compatible = "fsl,imx53-aipstz";
 606                                 reg = <0x63f00000 0x60>;
 607                         };
 608
 609                         iim: iim@63f98000 {
 610                                 compatible = "fsl,imx53-iim", "fsl,imx27-iim";
 611                                 reg = <0x63f98000 0x4000>;
 612                                 interrupts = <69>;
 613                                 clocks = <&clks IMX5_CLK_IIM_GATE>;
 614                         };
 615
 616                         uart5: serial@63f90000 {
 617                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 618                                 reg = <0x63f90000 0x4000>;
 619                                 interrupts = <86>;
 620                                 clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
 621                                          <&clks IMX5_CLK_UART5_PER_GATE>;
 622                                 clock-names = "ipg", "per";
 623                                 status = "disabled";
 624                         };
 625
 626                         owire: owire@63fa4000 {
 627                                 compatible = "fsl,imx53-owire", "fsl,imx21-owire";
 628                                 reg = <0x63fa4000 0x4000>;
 629                                 clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 630                                 status = "disabled";
 631                         };
 632
 633                         ecspi2: ecspi@63fac000 {
 634                                 #address-cells = <1>;
 635                                 #size-cells = <0>;
 636                                 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 637                                 reg = <0x63fac000 0x4000>;
 638                                 interrupts = <37>;
 639                                 clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
 640                                          <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 641                                 clock-names = "ipg", "per";
 642                                 status = "disabled";
 643                         };
 644
 645                         sdma: sdma@63fb0000 {
 646                                 compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 647                                 reg = <0x63fb0000 0x4000>;
 648                                 interrupts = <6>;
 649                                 clocks = <&clks IMX5_CLK_SDMA_GATE>,
 650                                          <&clks IMX5_CLK_SDMA_GATE>;
 651                                 clock-names = "ipg", "ahb";
 652                                 #dma-cells = <3>;
 653                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 654                         };
 655
 656                         cspi: cspi@63fc0000 {
 657                                 #address-cells = <1>;
 658                                 #size-cells = <0>;
 659                                 compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 660                                 reg = <0x63fc0000 0x4000>;
 661                                 interrupts = <38>;
 662                                 clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
 663                                          <&clks IMX5_CLK_CSPI_IPG_GATE>;
 664                                 clock-names = "ipg", "per";
 665                                 status = "disabled";
 666                         };
 667
 668                         i2c2: i2c@63fc4000 {
 669                                 #address-cells = <1>;
 670                                 #size-cells = <0>;
 671                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 672                                 reg = <0x63fc4000 0x4000>;
 673                                 interrupts = <63>;
 674                                 clocks = <&clks IMX5_CLK_I2C2_GATE>;
 675                                 status = "disabled";
 676                         };
 677
 678                         i2c1: i2c@63fc8000 {
 679                                 #address-cells = <1>;
 680                                 #size-cells = <0>;
 681                                 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 682                                 reg = <0x63fc8000 0x4000>;
 683                                 interrupts = <62>;
 684                                 clocks = <&clks IMX5_CLK_I2C1_GATE>;
 685                                 status = "disabled";
 686                         };
 687
 688                         ssi1: ssi@63fcc000 {
 689                                 #sound-dai-cells = <0>;
 690                                 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 691                                                 "fsl,imx21-ssi";
 692                                 reg = <0x63fcc000 0x4000>;
 693                                 interrupts = <29>;
 694                                 clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
 695                                          <&clks IMX5_CLK_SSI1_ROOT_GATE>;
 696                                 clock-names = "ipg", "baud";
 697                                 dmas = <&sdma 28 0 0>,
 698                                        <&sdma 29 0 0>;
 699                                 dma-names = "rx", "tx";
 700                                 fsl,fifo-depth = <15>;
 701                                 status = "disabled";
 702                         };
 703
 704                         audmux: audmux@63fd0000 {
 705                                 compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 706                                 reg = <0x63fd0000 0x4000>;
 707                                 status = "disabled";
 708                         };
 709
 710                         nfc: nand@63fdb000 {
 711                                 compatible = "fsl,imx53-nand";
 712                                 reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 713                                 interrupts = <8>;
 714                                 clocks = <&clks IMX5_CLK_NFC_GATE>;
 715                                 status = "disabled";
 716                         };
 717
 718                         ssi3: ssi@63fe8000 {
 719                                 #sound-dai-cells = <0>;
 720                                 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 721                                                 "fsl,imx21-ssi";
 722                                 reg = <0x63fe8000 0x4000>;
 723                                 interrupts = <96>;
 724                                 clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
 725                                          <&clks IMX5_CLK_SSI3_ROOT_GATE>;
 726                                 clock-names = "ipg", "baud";
 727                                 dmas = <&sdma 46 0 0>,
 728                                        <&sdma 47 0 0>;
 729                                 dma-names = "rx", "tx";
 730                                 fsl,fifo-depth = <15>;
 731                                 status = "disabled";
 732                         };
 733
 734                         fec: ethernet@63fec000 {
 735                                 compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 736                                 reg = <0x63fec000 0x4000>;
 737                                 interrupts = <87>;
 738                                 clocks = <&clks IMX5_CLK_FEC_GATE>,
 739                                          <&clks IMX5_CLK_FEC_GATE>,
 740                                          <&clks IMX5_CLK_FEC_GATE>;
 741                                 clock-names = "ipg", "ahb", "ptp";
 742                                 status = "disabled";
 743                         };
 744
 745                         tve: tve@63ff0000 {
 746                                 compatible = "fsl,imx53-tve";
 747                                 reg = <0x63ff0000 0x1000>;
 748                                 interrupts = <92>;
 749                                 clocks = <&clks IMX5_CLK_TVE_GATE>,
 750                                          <&clks IMX5_CLK_IPU_DI1_SEL>;
 751                                 clock-names = "tve", "di_sel";
 752                                 status = "disabled";
 753
 754                                 port {
 755                                         tve_in: endpoint {
 756                                                 remote-endpoint = <&ipu_di1_tve>;
 757                                         };
 758                                 };
 759                         };
 760
 761                         vpu: vpu@63ff4000 {
 762                                 compatible = "fsl,imx53-vpu", "cnm,coda7541";
 763                                 reg = <0x63ff4000 0x1000>;
 764                                 interrupts = <9>;
 765                                 clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
 766                                          <&clks IMX5_CLK_VPU_GATE>;
 767                                 clock-names = "per", "ahb";
 768                                 resets = <&src 1>;
 769                                 iram = <&ocram>;
 770                         };
 771
 772                         sahara: crypto@63ff8000 {
 773                                 compatible = "fsl,imx53-sahara";
 774                                 reg = <0x63ff8000 0x4000>;
 775                                 interrupts = <19 20>;
 776                                 clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
 777                                          <&clks IMX5_CLK_SAHARA_IPG_GATE>;
 778                                 clock-names = "ipg", "ahb";
 779                         };
 780                 };
 781
 782                 ocram: sram@f8000000 {
 783                         compatible = "mmio-sram";
 784                         reg = <0xf8000000 0x20000>;
 785                         clocks = <&clks IMX5_CLK_OCRAM>;
 786                 };
 787
 788                 pmu {
 789                         compatible = "arm,cortex-a8-pmu";
 790                         interrupts = <77>;
 791                 };
 792         };
 793 };