arch/arm/boot/dts/qcom-apq8064-ifc6410.dts

   1 #include "qcom-apq8064-v2.0.dtsi"
   2 #include <dt-bindings/gpio/gpio.h>
   3
   4 / {
   5         model = "Qualcomm APQ8064/IFC6410";
   6         compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
   7
   8         aliases {
   9                 serial0 = &gsbi7_serial;
  10                 serial1 = &gsbi6_serial;
  11         };
  12
  13         soc {
  14                 pinctrl@800000 {
  15                         card_detect: card_detect {
  16                                 mux {
  17                                         pins = "gpio26";
  18                                         function = "gpio";
  19                                         bias-disable;
  20                                 };
  21                         };
  22                 };
  23
  24                 rpm@108000 {
  25                         regulators {
  26                                 vin_lvs1_3_6-supply = <&pm8921_s4>;
  27                                 vin_lvs2-supply = <&pm8921_s1>;
  28                                 vin_lvs4_5_7-supply = <&pm8921_s4>;
  29
  30                                 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
  31                                 vdd_l24-supply = <&pm8921_s1>;
  32                                 vdd_l25-supply = <&pm8921_s1>;
  33                                 vdd_l26-supply = <&pm8921_s7>;
  34                                 vdd_l27-supply = <&pm8921_s7>;
  35                                 vdd_l28-supply = <&pm8921_s7>;
  36
  37
  38                                 /* Buck SMPS */
  39                                 pm8921_s1: s1 {
  40                                         regulator-always-on;
  41                                         regulator-min-microvolt = <1225000>;
  42                                         regulator-max-microvolt = <1225000>;
  43                                         qcom,switch-mode-frequency = <3200000>;
  44                                         bias-pull-down;
  45                                 };
  46
  47                                 pm8921_s3: s3 {
  48                                         regulator-min-microvolt = <1000000>;
  49                                         regulator-max-microvolt = <1400000>;
  50                                         qcom,switch-mode-frequency = <4800000>;
  51                                 };
  52
  53                                 pm8921_s4: s4 {
  54                                         regulator-min-microvolt = <1800000>;
  55                                         regulator-max-microvolt = <1800000>;
  56                                         qcom,switch-mode-frequency = <3200000>;
  57                                 };
  58
  59                                 pm8921_s7: s7 {
  60                                         regulator-min-microvolt = <1300000>;
  61                                         regulator-max-microvolt = <1300000>;
  62                                         qcom,switch-mode-frequency = <3200000>;
  63                                 };
  64
  65                                 pm8921_l3: l3 {
  66                                         regulator-min-microvolt = <3050000>;
  67                                         regulator-max-microvolt = <3300000>;
  68                                         bias-pull-down;
  69                                 };
  70
  71                                 pm8921_l4: l4 {
  72                                         regulator-min-microvolt = <1000000>;
  73                                         regulator-max-microvolt = <1800000>;
  74                                         bias-pull-down;
  75                                 };
  76
  77                                 pm8921_l5: l5 {
  78                                         regulator-min-microvolt = <2750000>;
  79                                         regulator-max-microvolt = <3000000>;
  80                                         bias-pull-down;
  81                                 };
  82
  83                                 pm8921_l6: l6 {
  84                                         regulator-min-microvolt = <2950000>;
  85                                         regulator-max-microvolt = <2950000>;
  86                                         bias-pull-down;
  87                                 };
  88
  89                                 pm8921_l23: l23 {
  90                                         regulator-min-microvolt = <1700000>;
  91                                         regulator-max-microvolt = <1900000>;
  92                                         bias-pull-down;
  93                                 };
  94
  95                                 pm8921_lvs1: lvs1 {
  96                                         bias-pull-down;
  97                                 };
  98                         };
  99                 };
 100
 101                 ext_3p3v: regulator-fixed@1 {
 102                         compatible = "regulator-fixed";
 103                         regulator-min-microvolt = <3300000>;
 104                         regulator-max-microvolt = <3300000>;
 105                         regulator-name = "ext_3p3v";
 106                         regulator-type = "voltage";
 107                         startup-delay-us = <0>;
 108                         gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
 109                         enable-active-high;
 110                         regulator-boot-on;
 111                 };
 112
 113                 gsbi3: gsbi@16200000 {
 114                         status = "okay";
 115                         qcom,mode = <GSBI_PROT_I2C>;
 116                         i2c3: i2c@16280000 {
 117                                 status = "okay";
 118                                 pinctrl-0 = <&i2c3_pins>;
 119                                 pinctrl-names = "default";
 120                         };
 121                 };
 122
 123                 gsbi@12440000 {
 124                         status = "okay";
 125                         qcom,mode = <GSBI_PROT_I2C>;
 126
 127                         i2c@12460000 {
 128                                 status = "okay";
 129                                 clock-frequency = <200000>;
 130                                 pinctrl-0 = <&i2c1_pins>;
 131                                 pinctrl-names = "default";
 132
 133                                 eeprom: eeprom@52 {
 134                                         compatible = "atmel,24c128";
 135                                         reg = <0x52>;
 136                                         pagesize = <32>;
 137                                 };
 138                         };
 139                 };
 140
 141                 gsbi@16500000 {
 142                         status = "ok";
 143                         qcom,mode = <GSBI_PROT_I2C_UART>;
 144
 145                         serial@16540000 {
 146                                 status = "ok";
 147
 148                                 pinctrl-names = "default";
 149                                 pinctrl-0 = <&uart_pins>;
 150                         };
 151                 };
 152
 153                 gsbi@16600000 {
 154                         status = "ok";
 155                         qcom,mode = <GSBI_PROT_I2C_UART>;
 156                         serial@16640000 {
 157                                 status = "ok";
 158                         };
 159                 };
 160
 161                 sata_phy0: phy@1b400000 {
 162                         status = "okay";
 163                 };
 164
 165                 sata0: sata@29000000 {
 166                         status          = "okay";
 167                         target-supply   = <&pm8921_s4>;
 168                 };
 169
 170                 /* OTG */
 171                 usb1_phy: phy@12500000 {
 172                         status          = "okay";
 173                         vddcx-supply    = <&pm8921_s3>;
 174                         v3p3-supply     = <&pm8921_l3>;
 175                         v1p8-supply     = <&pm8921_l4>;
 176                 };
 177
 178                 usb3_phy: phy@12520000 {
 179                         status          = "okay";
 180                         vddcx-supply    = <&pm8921_s3>;
 181                         v3p3-supply     = <&pm8921_l3>;
 182                         v1p8-supply     = <&pm8921_l23>;
 183                 };
 184
 185                 usb4_phy: phy@12530000 {
 186                         status          = "okay";
 187                         vddcx-supply    = <&pm8921_s3>;
 188                         v3p3-supply     = <&pm8921_l3>;
 189                         v1p8-supply     = <&pm8921_l23>;
 190                 };
 191
 192                 gadget1: gadget@12500000 {
 193                         status = "okay";
 194                 };
 195
 196                 /* OTG */
 197                 usb1: usb@12500000 {
 198                         status = "okay";
 199                 };
 200
 201                 usb3: usb@12520000 {
 202                         status = "okay";
 203                 };
 204
 205                 usb4: usb@12530000 {
 206                         status = "okay";
 207                 };
 208
 209                 amba {
 210                         /* eMMC */
 211                         sdcc1: sdcc@12400000 {
 212                                 status = "okay";
 213                                 vmmc-supply = <&pm8921_l5>;
 214                                 vqmmc-supply = <&pm8921_s4>;
 215                         };
 216
 217                         /* External micro SD card */
 218                         sdcc3: sdcc@12180000 {
 219                                 status = "okay";
 220                                 vmmc-supply = <&pm8921_l6>;
 221                                 pinctrl-names   = "default";
 222                                 pinctrl-0       = <&card_detect>;
 223                                 cd-gpios        = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 224                         };
 225                         /* WLAN */
 226                         sdcc4: sdcc@121c0000 {
 227                                 status = "okay";
 228                                 vmmc-supply = <&ext_3p3v>;
 229                                 vqmmc-supply = <&pm8921_lvs1>;
 230                         };
 231                 };
 232         };
 233 };