2 * P1022/P1013 Silicon/SoC Device Tree Source (post include)
4 * Copyright 2011 Freescale Semiconductor Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 * The localbus on the P1022 is not a simple-bus because of the eLBC
40 * pin muxing when the DIU is enabled.
42 compatible = "fsl,p1022-elbc", "fsl,elbc";
43 interrupts = <19 2 0 0>;
46 /* controller at 0x9000 */
48 compatible = "fsl,mpc8548-pcie";
53 clock-frequency = <33333333>;
54 interrupts = <16 2 0 0>;
58 #interrupt-cells = <1>;
62 interrupts = <16 2 0 0>;
63 interrupt-map-mask = <0xf800 0 0 7>;
66 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
67 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
68 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
69 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
74 /* controller at 0xa000 */
76 compatible = "fsl,mpc8548-pcie";
81 clock-frequency = <33333333>;
82 interrupts = <16 2 0 0>;
86 #interrupt-cells = <1>;
90 interrupts = <16 2 0 0>;
91 interrupt-map-mask = <0xf800 0 0 7>;
95 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
96 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
97 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
98 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
103 /* controller at 0xb000 */
105 compatible = "fsl,mpc8548-pcie";
108 #address-cells = <3>;
110 clock-frequency = <33333333>;
111 interrupts = <16 2 0 0>;
115 #interrupt-cells = <1>;
117 #address-cells = <3>;
119 interrupts = <16 2 0 0>;
120 interrupt-map-mask = <0xf800 0 0 7>;
124 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
125 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
126 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
127 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
133 #address-cells = <1>;
136 compatible = "fsl,p1022-immr", "simple-bus";
137 bus-frequency = <0>; // Filled out by uboot.
140 compatible = "fsl,ecm-law";
146 compatible = "fsl,p1022-ecm", "fsl,ecm";
147 reg = <0x1000 0x1000>;
148 interrupts = <16 2 0 0>;
151 memory-controller@2000 {
152 compatible = "fsl,p1022-memory-controller";
153 reg = <0x2000 0x1000>;
154 interrupts = <16 2 0 0>;
157 /include/ "pq3-i2c-0.dtsi"
158 /include/ "pq3-i2c-1.dtsi"
159 /include/ "pq3-duart-0.dtsi"
160 /include/ "pq3-espi-0.dtsi"
162 fsl,espi-num-chipselects = <4>;
165 /include/ "pq3-dma-1.dtsi"
167 dma00: dma-channel@0 {
168 compatible = "fsl,ssi-dma-channel";
170 dma01: dma-channel@80 {
171 compatible = "fsl,ssi-dma-channel";
175 /include/ "pq3-gpio-0.dtsi"
178 compatible = "fsl,diu", "fsl,p1022-diu";
179 reg = <0x10000 1000>;
180 interrupts = <64 2 0 0>;
184 compatible = "fsl,mpc8610-ssi";
186 reg = <0x15000 0x100>;
187 interrupts = <75 2 0 0>;
188 fsl,playback-dma = <&dma00>;
189 fsl,capture-dma = <&dma01>;
190 fsl,fifo-depth = <15>;
193 /include/ "pq3-sata2-0.dtsi"
194 /include/ "pq3-sata2-1.dtsi"
196 L2: l2-cache-controller@20000 {
197 compatible = "fsl,p1022-l2-cache-controller";
198 reg = <0x20000 0x1000>;
199 cache-line-size = <32>; // 32 bytes
200 cache-size = <0x40000>; // L2,256K
201 interrupts = <16 2 0 0>;
204 /include/ "pq3-dma-0.dtsi"
205 /include/ "pq3-usb2-dr-0.dtsi"
207 compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
209 /include/ "pq3-usb2-dr-1.dtsi"
211 compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
214 /include/ "pq3-esdhc-0.dtsi"
216 compatible = "fsl,p1022-esdhc", "fsl,esdhc";
220 /include/ "pq3-sec3.3-0.dtsi"
221 /include/ "pq3-mpic.dtsi"
222 /include/ "pq3-mpic-timer-B.dtsi"
224 /include/ "pq3-etsec2-0.dtsi"
225 enet0: enet0_grp2: ethernet@b0000 {
228 /include/ "pq3-etsec2-1.dtsi"
229 enet1: enet1_grp2: ethernet@b1000 {
232 global-utilities@e0000 {
233 compatible = "fsl,p1022-guts";
234 reg = <0xe0000 0x1000>;
239 compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
240 reg = <0xe0070 0x20>;
245 /include/ "pq3-etsec2-grp2-0.dtsi"
246 /include/ "pq3-etsec2-grp2-1.dtsi"