]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/edac/amd64_edac.h
arm: imx6: defconfig: update tx6 defconfigs
[karo-tx-linux.git] / drivers / edac / amd64_edac.h
1 /*
2  * AMD64 class Memory Controller kernel module
3  *
4  * Copyright (c) 2009 SoftwareBitMaker.
5  * Copyright (c) 2009 Advanced Micro Devices, Inc.
6  *
7  * This file may be distributed under the terms of the
8  * GNU General Public License.
9  *
10  *      Originally Written by Thayne Harbaugh
11  *
12  *      Changes by Douglas "norsk" Thompson  <dougthompson@xmission.com>:
13  *              - K8 CPU Revision D and greater support
14  *
15  *      Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>:
16  *              - Module largely rewritten, with new (and hopefully correct)
17  *              code for dealing with node and chip select interleaving,
18  *              various code cleanup, and bug fixes
19  *              - Added support for memory hoisting using DRAM hole address
20  *              register
21  *
22  *      Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
23  *              -K8 Rev (1207) revision support added, required Revision
24  *              specific mini-driver code to support Rev F as well as
25  *              prior revisions
26  *
27  *      Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
28  *              -Family 10h revision support added. New PCI Device IDs,
29  *              indicating new changes. Actual registers modified
30  *              were slight, less than the Rev E to Rev F transition
31  *              but changing the PCI Device ID was the proper thing to
32  *              do, as it provides for almost automactic family
33  *              detection. The mods to Rev F required more family
34  *              information detection.
35  *
36  *      Changes/Fixes by Borislav Petkov <bp@alien8.de>:
37  *              - misc fixes and code cleanups
38  *
39  * This module is based on the following documents
40  * (available from http://www.amd.com/):
41  *
42  *      Title:  BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
43  *              Opteron Processors
44  *      AMD publication #: 26094
45  *`     Revision: 3.26
46  *
47  *      Title:  BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
48  *              Processors
49  *      AMD publication #: 32559
50  *      Revision: 3.00
51  *      Issue Date: May 2006
52  *
53  *      Title:  BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
54  *              Processors
55  *      AMD publication #: 31116
56  *      Revision: 3.00
57  *      Issue Date: September 07, 2007
58  *
59  * Sections in the first 2 documents are no longer in sync with each other.
60  * The Family 10h BKDG was totally re-written from scratch with a new
61  * presentation model.
62  * Therefore, comments that refer to a Document section might be off.
63  */
64
65 #include <linux/module.h>
66 #include <linux/ctype.h>
67 #include <linux/init.h>
68 #include <linux/pci.h>
69 #include <linux/pci_ids.h>
70 #include <linux/slab.h>
71 #include <linux/mmzone.h>
72 #include <linux/edac.h>
73 #include <asm/msr.h>
74 #include "edac_core.h"
75 #include "mce_amd.h"
76
77 #define amd64_debug(fmt, arg...) \
78         edac_printk(KERN_DEBUG, "amd64", fmt, ##arg)
79
80 #define amd64_info(fmt, arg...) \
81         edac_printk(KERN_INFO, "amd64", fmt, ##arg)
82
83 #define amd64_notice(fmt, arg...) \
84         edac_printk(KERN_NOTICE, "amd64", fmt, ##arg)
85
86 #define amd64_warn(fmt, arg...) \
87         edac_printk(KERN_WARNING, "amd64", fmt, ##arg)
88
89 #define amd64_err(fmt, arg...) \
90         edac_printk(KERN_ERR, "amd64", fmt, ##arg)
91
92 #define amd64_mc_warn(mci, fmt, arg...) \
93         edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
94
95 #define amd64_mc_err(mci, fmt, arg...) \
96         edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
97
98 /*
99  * Throughout the comments in this code, the following terms are used:
100  *
101  *      SysAddr, DramAddr, and InputAddr
102  *
103  *  These terms come directly from the amd64 documentation
104  * (AMD publication #26094).  They are defined as follows:
105  *
106  *     SysAddr:
107  *         This is a physical address generated by a CPU core or a device
108  *         doing DMA.  If generated by a CPU core, a SysAddr is the result of
109  *         a virtual to physical address translation by the CPU core's address
110  *         translation mechanism (MMU).
111  *
112  *     DramAddr:
113  *         A DramAddr is derived from a SysAddr by subtracting an offset that
114  *         depends on which node the SysAddr maps to and whether the SysAddr
115  *         is within a range affected by memory hoisting.  The DRAM Base
116  *         (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
117  *         determine which node a SysAddr maps to.
118  *
119  *         If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
120  *         is within the range of addresses specified by this register, then
121  *         a value x from the DHAR is subtracted from the SysAddr to produce a
122  *         DramAddr.  Here, x represents the base address for the node that
123  *         the SysAddr maps to plus an offset due to memory hoisting.  See
124  *         section 3.4.8 and the comments in amd64_get_dram_hole_info() and
125  *         sys_addr_to_dram_addr() below for more information.
126  *
127  *         If the SysAddr is not affected by the DHAR then a value y is
128  *         subtracted from the SysAddr to produce a DramAddr.  Here, y is the
129  *         base address for the node that the SysAddr maps to.  See section
130  *         3.4.4 and the comments in sys_addr_to_dram_addr() below for more
131  *         information.
132  *
133  *     InputAddr:
134  *         A DramAddr is translated to an InputAddr before being passed to the
135  *         memory controller for the node that the DramAddr is associated
136  *         with.  The memory controller then maps the InputAddr to a csrow.
137  *         If node interleaving is not in use, then the InputAddr has the same
138  *         value as the DramAddr.  Otherwise, the InputAddr is produced by
139  *         discarding the bits used for node interleaving from the DramAddr.
140  *         See section 3.4.4 for more information.
141  *
142  *         The memory controller for a given node uses its DRAM CS Base and
143  *         DRAM CS Mask registers to map an InputAddr to a csrow.  See
144  *         sections 3.5.4 and 3.5.5 for more information.
145  */
146
147 #define EDAC_AMD64_VERSION              "3.4.0"
148 #define EDAC_MOD_STR                    "amd64_edac"
149
150 /* Extended Model from CPUID, for CPU Revision numbers */
151 #define K8_REV_D                        1
152 #define K8_REV_E                        2
153 #define K8_REV_F                        4
154
155 /* Hardware limit on ChipSelect rows per MC and processors per system */
156 #define NUM_CHIPSELECTS                 8
157 #define DRAM_RANGES                     8
158
159 #define ON true
160 #define OFF false
161
162 /*
163  * Create a contiguous bitmask starting at bit position @lo and ending at
164  * position @hi. For example
165  *
166  * GENMASK(21, 39) gives us the 64bit vector 0x000000ffffe00000.
167  */
168 #define GENMASK(lo, hi)                 (((1ULL << ((hi) - (lo) + 1)) - 1) << (lo))
169
170 /*
171  * PCI-defined configuration space registers
172  */
173 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
174 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
175 #define PCI_DEVICE_ID_AMD_15H_NB_F1     0x1601
176 #define PCI_DEVICE_ID_AMD_15H_NB_F2     0x1602
177 #define PCI_DEVICE_ID_AMD_16H_NB_F1     0x1531
178 #define PCI_DEVICE_ID_AMD_16H_NB_F2     0x1532
179
180 /*
181  * Function 1 - Address Map
182  */
183 #define DRAM_BASE_LO                    0x40
184 #define DRAM_LIMIT_LO                   0x44
185
186 /*
187  * F15 M30h D18F1x2[1C:00]
188  */
189 #define DRAM_CONT_BASE                  0x200
190 #define DRAM_CONT_LIMIT                 0x204
191
192 /*
193  * F15 M30h D18F1x2[4C:40]
194  */
195 #define DRAM_CONT_HIGH_OFF              0x240
196
197 #define dram_rw(pvt, i)                 ((u8)(pvt->ranges[i].base.lo & 0x3))
198 #define dram_intlv_sel(pvt, i)          ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
199 #define dram_dst_node(pvt, i)           ((u8)(pvt->ranges[i].lim.lo & 0x7))
200
201 #define DHAR                            0xf0
202 #define dhar_mem_hoist_valid(pvt)       ((pvt)->dhar & BIT(1))
203 #define dhar_base(pvt)                  ((pvt)->dhar & 0xff000000)
204 #define k8_dhar_offset(pvt)             (((pvt)->dhar & 0x0000ff00) << 16)
205
206                                         /* NOTE: Extra mask bit vs K8 */
207 #define f10_dhar_offset(pvt)            (((pvt)->dhar & 0x0000ff80) << 16)
208
209 #define DCT_CFG_SEL                     0x10C
210
211 #define DRAM_LOCAL_NODE_BASE            0x120
212 #define DRAM_LOCAL_NODE_LIM             0x124
213
214 #define DRAM_BASE_HI                    0x140
215 #define DRAM_LIMIT_HI                   0x144
216
217
218 /*
219  * Function 2 - DRAM controller
220  */
221 #define DCSB0                           0x40
222 #define DCSB1                           0x140
223 #define DCSB_CS_ENABLE                  BIT(0)
224
225 #define DCSM0                           0x60
226 #define DCSM1                           0x160
227
228 #define csrow_enabled(i, dct, pvt)      ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
229
230 #define DBAM0                           0x80
231 #define DBAM1                           0x180
232
233 /* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
234 #define DBAM_DIMM(i, reg)               ((((reg) >> (4*(i)))) & 0xF)
235
236 #define DBAM_MAX_VALUE                  11
237
238 #define DCLR0                           0x90
239 #define DCLR1                           0x190
240 #define REVE_WIDTH_128                  BIT(16)
241 #define WIDTH_128                       BIT(11)
242
243 #define DCHR0                           0x94
244 #define DCHR1                           0x194
245 #define DDR3_MODE                       BIT(8)
246
247 #define DCT_SEL_LO                      0x110
248 #define dct_high_range_enabled(pvt)     ((pvt)->dct_sel_lo & BIT(0))
249 #define dct_interleave_enabled(pvt)     ((pvt)->dct_sel_lo & BIT(2))
250
251 #define dct_ganging_enabled(pvt)        ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
252
253 #define dct_data_intlv_enabled(pvt)     ((pvt)->dct_sel_lo & BIT(5))
254 #define dct_memory_cleared(pvt)         ((pvt)->dct_sel_lo & BIT(10))
255
256 #define SWAP_INTLV_REG                  0x10c
257
258 #define DCT_SEL_HI                      0x114
259
260 /*
261  * Function 3 - Misc Control
262  */
263 #define NBCTL                           0x40
264
265 #define NBCFG                           0x44
266 #define NBCFG_CHIPKILL                  BIT(23)
267 #define NBCFG_ECC_ENABLE                BIT(22)
268
269 /* F3x48: NBSL */
270 #define F10_NBSL_EXT_ERR_ECC            0x8
271 #define NBSL_PP_OBS                     0x2
272
273 #define SCRCTRL                         0x58
274
275 #define F10_ONLINE_SPARE                0xB0
276 #define online_spare_swap_done(pvt, c)  (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
277 #define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
278
279 #define F10_NB_ARRAY_ADDR               0xB8
280 #define F10_NB_ARRAY_DRAM               BIT(31)
281
282 /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
283 #define SET_NB_ARRAY_ADDR(section)      (((section) & 0x3) << 1)
284
285 #define F10_NB_ARRAY_DATA               0xBC
286 #define F10_NB_ARR_ECC_WR_REQ           BIT(17)
287 #define SET_NB_DRAM_INJECTION_WRITE(inj)  \
288                                         (BIT(((inj.word) & 0xF) + 20) | \
289                                         F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
290 #define SET_NB_DRAM_INJECTION_READ(inj)  \
291                                         (BIT(((inj.word) & 0xF) + 20) | \
292                                         BIT(16) |  inj.bit_map)
293
294
295 #define NBCAP                           0xE8
296 #define NBCAP_CHIPKILL                  BIT(4)
297 #define NBCAP_SECDED                    BIT(3)
298 #define NBCAP_DCT_DUAL                  BIT(0)
299
300 #define EXT_NB_MCA_CFG                  0x180
301
302 /* MSRs */
303 #define MSR_MCGCTL_NBE                  BIT(4)
304
305 enum amd_families {
306         K8_CPUS = 0,
307         F10_CPUS,
308         F15_CPUS,
309         F15_M30H_CPUS,
310         F16_CPUS,
311         NUM_FAMILIES,
312 };
313
314 /* Error injection control structure */
315 struct error_injection {
316         u32      section;
317         u32      word;
318         u32      bit_map;
319 };
320
321 /* low and high part of PCI config space regs */
322 struct reg_pair {
323         u32 lo, hi;
324 };
325
326 /*
327  * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
328  */
329 struct dram_range {
330         struct reg_pair base;
331         struct reg_pair lim;
332 };
333
334 /* A DCT chip selects collection */
335 struct chip_select {
336         u32 csbases[NUM_CHIPSELECTS];
337         u8 b_cnt;
338
339         u32 csmasks[NUM_CHIPSELECTS];
340         u8 m_cnt;
341 };
342
343 struct amd64_pvt {
344         struct low_ops *ops;
345
346         /* pci_device handles which we utilize */
347         struct pci_dev *F1, *F2, *F3;
348
349         u16 mc_node_id;         /* MC index of this MC node */
350         u8 fam;                 /* CPU family */
351         u8 model;               /* ... model */
352         u8 stepping;            /* ... stepping */
353
354         int ext_model;          /* extended model value of this node */
355         int channel_count;
356
357         /* Raw registers */
358         u32 dclr0;              /* DRAM Configuration Low DCT0 reg */
359         u32 dclr1;              /* DRAM Configuration Low DCT1 reg */
360         u32 dchr0;              /* DRAM Configuration High DCT0 reg */
361         u32 dchr1;              /* DRAM Configuration High DCT1 reg */
362         u32 nbcap;              /* North Bridge Capabilities */
363         u32 nbcfg;              /* F10 North Bridge Configuration */
364         u32 ext_nbcfg;          /* Extended F10 North Bridge Configuration */
365         u32 dhar;               /* DRAM Hoist reg */
366         u32 dbam0;              /* DRAM Base Address Mapping reg for DCT0 */
367         u32 dbam1;              /* DRAM Base Address Mapping reg for DCT1 */
368
369         /* one for each DCT */
370         struct chip_select csels[2];
371
372         /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
373         struct dram_range ranges[DRAM_RANGES];
374
375         u64 top_mem;            /* top of memory below 4GB */
376         u64 top_mem2;           /* top of memory above 4GB */
377
378         u32 dct_sel_lo;         /* DRAM Controller Select Low */
379         u32 dct_sel_hi;         /* DRAM Controller Select High */
380         u32 online_spare;       /* On-Line spare Reg */
381
382         /* x4 or x8 syndromes in use */
383         u8 ecc_sym_sz;
384
385         /* place to store error injection parameters prior to issue */
386         struct error_injection injection;
387 };
388
389 enum err_codes {
390         DECODE_OK       =  0,
391         ERR_NODE        = -1,
392         ERR_CSROW       = -2,
393         ERR_CHANNEL     = -3,
394 };
395
396 struct err_info {
397         int err_code;
398         struct mem_ctl_info *src_mci;
399         int csrow;
400         int channel;
401         u16 syndrome;
402         u32 page;
403         u32 offset;
404 };
405
406 static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
407 {
408         u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
409
410         if (boot_cpu_data.x86 == 0xf)
411                 return addr;
412
413         return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
414 }
415
416 static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
417 {
418         u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
419
420         if (boot_cpu_data.x86 == 0xf)
421                 return lim;
422
423         return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
424 }
425
426 static inline u16 extract_syndrome(u64 status)
427 {
428         return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
429 }
430
431 static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
432 {
433         if (pvt->fam == 0x15 && pvt->model >= 0x30)
434                 return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
435                         ((pvt->dct_sel_lo >> 6) & 0x3);
436
437         return  ((pvt)->dct_sel_lo >> 6) & 0x3;
438 }
439 /*
440  * per-node ECC settings descriptor
441  */
442 struct ecc_settings {
443         u32 old_nbctl;
444         bool nbctl_valid;
445
446         struct flags {
447                 unsigned long nb_mce_enable:1;
448                 unsigned long nb_ecc_prev:1;
449         } flags;
450 };
451
452 #ifdef CONFIG_EDAC_DEBUG
453 int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci);
454 void amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci);
455
456 #else
457 static inline int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci)
458 {
459         return 0;
460 }
461 static void inline amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci)
462 {
463 }
464 #endif
465
466 #ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
467 int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci);
468 void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci);
469
470 #else
471 static inline int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci)
472 {
473         return 0;
474 }
475 static inline void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci)
476 {
477 }
478 #endif
479
480 /*
481  * Each of the PCI Device IDs types have their own set of hardware accessor
482  * functions and per device encoding/decoding logic.
483  */
484 struct low_ops {
485         int (*early_channel_count)      (struct amd64_pvt *pvt);
486         void (*map_sysaddr_to_csrow)    (struct mem_ctl_info *mci, u64 sys_addr,
487                                          struct err_info *);
488         int (*dbam_to_cs)               (struct amd64_pvt *pvt, u8 dct, unsigned cs_mode);
489         int (*read_dct_pci_cfg)         (struct amd64_pvt *pvt, int offset,
490                                          u32 *val, const char *func);
491 };
492
493 struct amd64_family_type {
494         const char *ctl_name;
495         u16 f1_id, f3_id;
496         struct low_ops ops;
497 };
498
499 int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
500                                u32 *val, const char *func);
501 int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
502                                 u32 val, const char *func);
503
504 #define amd64_read_pci_cfg(pdev, offset, val)   \
505         __amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
506
507 #define amd64_write_pci_cfg(pdev, offset, val)  \
508         __amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
509
510 #define amd64_read_dct_pci_cfg(pvt, offset, val) \
511         pvt->ops->read_dct_pci_cfg(pvt, offset, val, __func__)
512
513 int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
514                              u64 *hole_offset, u64 *hole_size);
515
516 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
517
518 /* Injection helpers */
519 static inline void disable_caches(void *dummy)
520 {
521         write_cr0(read_cr0() | X86_CR0_CD);
522         wbinvd();
523 }
524
525 static inline void enable_caches(void *dummy)
526 {
527         write_cr0(read_cr0() & ~X86_CR0_CD);
528 }
529
530 static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
531 {
532         if (pvt->fam == 0x15 && pvt->model >= 0x30) {
533                 u32 tmp;
534                 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
535                 return (u8) tmp & 0xF;
536         }
537         return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
538 }
539
540 static inline u8 dhar_valid(struct amd64_pvt *pvt)
541 {
542         if (pvt->fam == 0x15 && pvt->model >= 0x30) {
543                 u32 tmp;
544                 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
545                 return (tmp >> 1) & BIT(0);
546         }
547         return (pvt)->dhar & BIT(0);
548 }
549
550 static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
551 {
552         if (pvt->fam == 0x15 && pvt->model >= 0x30) {
553                 u32 tmp;
554                 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
555                 return (tmp >> 11) & 0x1FFF;
556         }
557         return (pvt)->dct_sel_lo & 0xFFFFF800;
558 }