drivers/gpio/gpio-omap.c

   1 /*
   2  * Support functions for OMAP GPIO
   3  *
   4  * Copyright (C) 2003-2005 Nokia Corporation
   5  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
   6  *
   7  * Copyright (C) 2009 Texas Instruments
   8  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/init.h>
  16 #include <linux/module.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/syscore_ops.h>
  19 #include <linux/err.h>
  20 #include <linux/clk.h>
  21 #include <linux/io.h>
  22 #include <linux/device.h>
  23 #include <linux/pm_runtime.h>
  24 #include <linux/pm.h>
  25 #include <linux/of.h>
  26 #include <linux/of_device.h>
  27 #include <linux/gpio.h>
  28 #include <linux/bitops.h>
  29 #include <linux/platform_data/gpio-omap.h>
  30
  31 #define OFF_MODE        1
  32
  33 static LIST_HEAD(omap_gpio_list);
  34
  35 struct gpio_regs {
  36         u32 irqenable1;
  37         u32 irqenable2;
  38         u32 wake_en;
  39         u32 ctrl;
  40         u32 oe;
  41         u32 leveldetect0;
  42         u32 leveldetect1;
  43         u32 risingdetect;
  44         u32 fallingdetect;
  45         u32 dataout;
  46         u32 debounce;
  47         u32 debounce_en;
  48 };
  49
  50 struct gpio_bank {
  51         struct list_head node;
  52         void __iomem *base;
  53         u16 irq;
  54         u32 non_wakeup_gpios;
  55         u32 enabled_non_wakeup_gpios;
  56         struct gpio_regs context;
  57         u32 saved_datain;
  58         u32 level_mask;
  59         u32 toggle_mask;
  60         spinlock_t lock;
  61         struct gpio_chip chip;
  62         struct clk *dbck;
  63         u32 mod_usage;
  64         u32 irq_usage;
  65         u32 dbck_enable_mask;
  66         bool dbck_enabled;
  67         struct device *dev;
  68         bool is_mpuio;
  69         bool dbck_flag;
  70         bool loses_context;
  71         bool context_valid;
  72         int stride;
  73         u32 width;
  74         int context_loss_count;
  75         int power_mode;
  76         bool workaround_enabled;
  77
  78         void (*set_dataout)(struct gpio_bank *bank, unsigned gpio, int enable);
  79         int (*get_context_loss_count)(struct device *dev);
  80
  81         struct omap_gpio_reg_offs *regs;
  82 };
  83
  84 #define GPIO_MOD_CTRL_BIT       BIT(0)
  85
  86 #define BANK_USED(bank) (bank->mod_usage || bank->irq_usage)
  87 #define LINE_USED(line, offset) (line & (BIT(offset)))
  88
  89 static void omap_gpio_unmask_irq(struct irq_data *d);
  90
  91 static inline struct gpio_bank *omap_irq_data_get_bank(struct irq_data *d)
  92 {
  93         struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
  94         return container_of(chip, struct gpio_bank, chip);
  95 }
  96
  97 static void omap_set_gpio_direction(struct gpio_bank *bank, int gpio,
  98                                     int is_input)
  99 {
 100         void __iomem *reg = bank->base;
 101         u32 l;
 102
 103         reg += bank->regs->direction;
 104         l = readl_relaxed(reg);
 105         if (is_input)
 106                 l |= BIT(gpio);
 107         else
 108                 l &= ~(BIT(gpio));
 109         writel_relaxed(l, reg);
 110         bank->context.oe = l;
 111 }
 112
 113
 114 /* set data out value using dedicate set/clear register */
 115 static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, unsigned offset,
 116                                       int enable)
 117 {
 118         void __iomem *reg = bank->base;
 119         u32 l = BIT(offset);
 120
 121         if (enable) {
 122                 reg += bank->regs->set_dataout;
 123                 bank->context.dataout |= l;
 124         } else {
 125                 reg += bank->regs->clr_dataout;
 126                 bank->context.dataout &= ~l;
 127         }
 128
 129         writel_relaxed(l, reg);
 130 }
 131
 132 /* set data out value using mask register */
 133 static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, unsigned offset,
 134                                        int enable)
 135 {
 136         void __iomem *reg = bank->base + bank->regs->dataout;
 137         u32 gpio_bit = BIT(offset);
 138         u32 l;
 139
 140         l = readl_relaxed(reg);
 141         if (enable)
 142                 l |= gpio_bit;
 143         else
 144                 l &= ~gpio_bit;
 145         writel_relaxed(l, reg);
 146         bank->context.dataout = l;
 147 }
 148
 149 static int omap_get_gpio_datain(struct gpio_bank *bank, int offset)
 150 {
 151         void __iomem *reg = bank->base + bank->regs->datain;
 152
 153         return (readl_relaxed(reg) & (BIT(offset))) != 0;
 154 }
 155
 156 static int omap_get_gpio_dataout(struct gpio_bank *bank, int offset)
 157 {
 158         void __iomem *reg = bank->base + bank->regs->dataout;
 159
 160         return (readl_relaxed(reg) & (BIT(offset))) != 0;
 161 }
 162
 163 static inline void omap_gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
 164 {
 165         int l = readl_relaxed(base + reg);
 166
 167         if (set)
 168                 l |= mask;
 169         else
 170                 l &= ~mask;
 171
 172         writel_relaxed(l, base + reg);
 173 }
 174
 175 static inline void omap_gpio_dbck_enable(struct gpio_bank *bank)
 176 {
 177         if (bank->dbck_enable_mask && !bank->dbck_enabled) {
 178                 clk_prepare_enable(bank->dbck);
 179                 bank->dbck_enabled = true;
 180
 181                 writel_relaxed(bank->dbck_enable_mask,
 182                              bank->base + bank->regs->debounce_en);
 183         }
 184 }
 185
 186 static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
 187 {
 188         if (bank->dbck_enable_mask && bank->dbck_enabled) {
 189                 /*
 190                  * Disable debounce before cutting it's clock. If debounce is
 191                  * enabled but the clock is not, GPIO module seems to be unable
 192                  * to detect events and generate interrupts at least on OMAP3.
 193                  */
 194                 writel_relaxed(0, bank->base + bank->regs->debounce_en);
 195
 196                 clk_disable_unprepare(bank->dbck);
 197                 bank->dbck_enabled = false;
 198         }
 199 }
 200
 201 /**
 202  * omap2_set_gpio_debounce - low level gpio debounce time
 203  * @bank: the gpio bank we're acting upon
 204  * @offset: the gpio number on this @bank
 205  * @debounce: debounce time to use
 206  *
 207  * OMAP's debounce time is in 31us steps so we need
 208  * to convert and round up to the closest unit.
 209  */
 210 static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
 211                                     unsigned debounce)
 212 {
 213         void __iomem            *reg;
 214         u32                     val;
 215         u32                     l;
 216
 217         if (!bank->dbck_flag)
 218                 return;
 219
 220         if (debounce < 32)
 221                 debounce = 0x01;
 222         else if (debounce > 7936)
 223                 debounce = 0xff;
 224         else
 225                 debounce = (debounce / 0x1f) - 1;
 226
 227         l = BIT(offset);
 228
 229         clk_prepare_enable(bank->dbck);
 230         reg = bank->base + bank->regs->debounce;
 231         writel_relaxed(debounce, reg);
 232
 233         reg = bank->base + bank->regs->debounce_en;
 234         val = readl_relaxed(reg);
 235
 236         if (debounce)
 237                 val |= l;
 238         else
 239                 val &= ~l;
 240         bank->dbck_enable_mask = val;
 241
 242         writel_relaxed(val, reg);
 243         clk_disable_unprepare(bank->dbck);
 244         /*
 245          * Enable debounce clock per module.
 246          * This call is mandatory because in omap_gpio_request() when
 247          * *_runtime_get_sync() is called,  _gpio_dbck_enable() within
 248          * runtime callbck fails to turn on dbck because dbck_enable_mask
 249          * used within _gpio_dbck_enable() is still not initialized at
 250          * that point. Therefore we have to enable dbck here.
 251          */
 252         omap_gpio_dbck_enable(bank);
 253         if (bank->dbck_enable_mask) {
 254                 bank->context.debounce = debounce;
 255                 bank->context.debounce_en = val;
 256         }
 257 }
 258
 259 /**
 260  * omap_clear_gpio_debounce - clear debounce settings for a gpio
 261  * @bank: the gpio bank we're acting upon
 262  * @offset: the gpio number on this @bank
 263  *
 264  * If a gpio is using debounce, then clear the debounce enable bit and if
 265  * this is the only gpio in this bank using debounce, then clear the debounce
 266  * time too. The debounce clock will also be disabled when calling this function
 267  * if this is the only gpio in the bank using debounce.
 268  */
 269 static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
 270 {
 271         u32 gpio_bit = BIT(offset);
 272
 273         if (!bank->dbck_flag)
 274                 return;
 275
 276         if (!(bank->dbck_enable_mask & gpio_bit))
 277                 return;
 278
 279         bank->dbck_enable_mask &= ~gpio_bit;
 280         bank->context.debounce_en &= ~gpio_bit;
 281         writel_relaxed(bank->context.debounce_en,
 282                      bank->base + bank->regs->debounce_en);
 283
 284         if (!bank->dbck_enable_mask) {
 285                 bank->context.debounce = 0;
 286                 writel_relaxed(bank->context.debounce, bank->base +
 287                              bank->regs->debounce);
 288                 clk_disable_unprepare(bank->dbck);
 289                 bank->dbck_enabled = false;
 290         }
 291 }
 292
 293 static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
 294                                                 unsigned trigger)
 295 {
 296         void __iomem *base = bank->base;
 297         u32 gpio_bit = BIT(gpio);
 298
 299         omap_gpio_rmw(base, bank->regs->leveldetect0, gpio_bit,
 300                       trigger & IRQ_TYPE_LEVEL_LOW);
 301         omap_gpio_rmw(base, bank->regs->leveldetect1, gpio_bit,
 302                       trigger & IRQ_TYPE_LEVEL_HIGH);
 303         omap_gpio_rmw(base, bank->regs->risingdetect, gpio_bit,
 304                       trigger & IRQ_TYPE_EDGE_RISING);
 305         omap_gpio_rmw(base, bank->regs->fallingdetect, gpio_bit,
 306                       trigger & IRQ_TYPE_EDGE_FALLING);
 307
 308         bank->context.leveldetect0 =
 309                         readl_relaxed(bank->base + bank->regs->leveldetect0);
 310         bank->context.leveldetect1 =
 311                         readl_relaxed(bank->base + bank->regs->leveldetect1);
 312         bank->context.risingdetect =
 313                         readl_relaxed(bank->base + bank->regs->risingdetect);
 314         bank->context.fallingdetect =
 315                         readl_relaxed(bank->base + bank->regs->fallingdetect);
 316
 317         if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 318                 omap_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
 319                 bank->context.wake_en =
 320                         readl_relaxed(bank->base + bank->regs->wkup_en);
 321         }
 322
 323         /* This part needs to be executed always for OMAP{34xx, 44xx} */
 324         if (!bank->regs->irqctrl) {
 325                 /* On omap24xx proceed only when valid GPIO bit is set */
 326                 if (bank->non_wakeup_gpios) {
 327                         if (!(bank->non_wakeup_gpios & gpio_bit))
 328                                 goto exit;
 329                 }
 330
 331                 /*
 332                  * Log the edge gpio and manually trigger the IRQ
 333                  * after resume if the input level changes
 334                  * to avoid irq lost during PER RET/OFF mode
 335                  * Applies for omap2 non-wakeup gpio and all omap3 gpios
 336                  */
 337                 if (trigger & IRQ_TYPE_EDGE_BOTH)
 338                         bank->enabled_non_wakeup_gpios |= gpio_bit;
 339                 else
 340                         bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 341         }
 342
 343 exit:
 344         bank->level_mask =
 345                 readl_relaxed(bank->base + bank->regs->leveldetect0) |
 346                 readl_relaxed(bank->base + bank->regs->leveldetect1);
 347 }
 348
 349 #ifdef CONFIG_ARCH_OMAP1
 350 /*
 351  * This only applies to chips that can't do both rising and falling edge
 352  * detection at once.  For all other chips, this function is a noop.
 353  */
 354 static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 355 {
 356         void __iomem *reg = bank->base;
 357         u32 l = 0;
 358
 359         if (!bank->regs->irqctrl)
 360                 return;
 361
 362         reg += bank->regs->irqctrl;
 363
 364         l = readl_relaxed(reg);
 365         if ((l >> gpio) & 1)
 366                 l &= ~(BIT(gpio));
 367         else
 368                 l |= BIT(gpio);
 369
 370         writel_relaxed(l, reg);
 371 }
 372 #else
 373 static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
 374 #endif
 375
 376 static int omap_set_gpio_triggering(struct gpio_bank *bank, int gpio,
 377                                     unsigned trigger)
 378 {
 379         void __iomem *reg = bank->base;
 380         void __iomem *base = bank->base;
 381         u32 l = 0;
 382
 383         if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
 384                 omap_set_gpio_trigger(bank, gpio, trigger);
 385         } else if (bank->regs->irqctrl) {
 386                 reg += bank->regs->irqctrl;
 387
 388                 l = readl_relaxed(reg);
 389                 if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 390                         bank->toggle_mask |= BIT(gpio);
 391                 if (trigger & IRQ_TYPE_EDGE_RISING)
 392                         l |= BIT(gpio);
 393                 else if (trigger & IRQ_TYPE_EDGE_FALLING)
 394                         l &= ~(BIT(gpio));
 395                 else
 396                         return -EINVAL;
 397
 398                 writel_relaxed(l, reg);
 399         } else if (bank->regs->edgectrl1) {
 400                 if (gpio & 0x08)
 401                         reg += bank->regs->edgectrl2;
 402                 else
 403                         reg += bank->regs->edgectrl1;
 404
 405                 gpio &= 0x07;
 406                 l = readl_relaxed(reg);
 407                 l &= ~(3 << (gpio << 1));
 408                 if (trigger & IRQ_TYPE_EDGE_RISING)
 409                         l |= 2 << (gpio << 1);
 410                 if (trigger & IRQ_TYPE_EDGE_FALLING)
 411                         l |= BIT(gpio << 1);
 412
 413                 /* Enable wake-up during idle for dynamic tick */
 414                 omap_gpio_rmw(base, bank->regs->wkup_en, BIT(gpio), trigger);
 415                 bank->context.wake_en =
 416                         readl_relaxed(bank->base + bank->regs->wkup_en);
 417                 writel_relaxed(l, reg);
 418         }
 419         return 0;
 420 }
 421
 422 static void omap_enable_gpio_module(struct gpio_bank *bank, unsigned offset)
 423 {
 424         if (bank->regs->pinctrl) {
 425                 void __iomem *reg = bank->base + bank->regs->pinctrl;
 426
 427                 /* Claim the pin for MPU */
 428                 writel_relaxed(readl_relaxed(reg) | (BIT(offset)), reg);
 429         }
 430
 431         if (bank->regs->ctrl && !BANK_USED(bank)) {
 432                 void __iomem *reg = bank->base + bank->regs->ctrl;
 433                 u32 ctrl;
 434
 435                 ctrl = readl_relaxed(reg);
 436                 /* Module is enabled, clocks are not gated */
 437                 ctrl &= ~GPIO_MOD_CTRL_BIT;
 438                 writel_relaxed(ctrl, reg);
 439                 bank->context.ctrl = ctrl;
 440         }
 441 }
 442
 443 static void omap_disable_gpio_module(struct gpio_bank *bank, unsigned offset)
 444 {
 445         void __iomem *base = bank->base;
 446
 447         if (bank->regs->wkup_en &&
 448             !LINE_USED(bank->mod_usage, offset) &&
 449             !LINE_USED(bank->irq_usage, offset)) {
 450                 /* Disable wake-up during idle for dynamic tick */
 451                 omap_gpio_rmw(base, bank->regs->wkup_en, BIT(offset), 0);
 452                 bank->context.wake_en =
 453                         readl_relaxed(bank->base + bank->regs->wkup_en);
 454         }
 455
 456         if (bank->regs->ctrl && !BANK_USED(bank)) {
 457                 void __iomem *reg = bank->base + bank->regs->ctrl;
 458                 u32 ctrl;
 459
 460                 ctrl = readl_relaxed(reg);
 461                 /* Module is disabled, clocks are gated */
 462                 ctrl |= GPIO_MOD_CTRL_BIT;
 463                 writel_relaxed(ctrl, reg);
 464                 bank->context.ctrl = ctrl;
 465         }
 466 }
 467
 468 static int omap_gpio_is_input(struct gpio_bank *bank, unsigned offset)
 469 {
 470         void __iomem *reg = bank->base + bank->regs->direction;
 471
 472         return readl_relaxed(reg) & BIT(offset);
 473 }
 474
 475 static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned offset)
 476 {
 477         if (!LINE_USED(bank->mod_usage, offset)) {
 478                 omap_enable_gpio_module(bank, offset);
 479                 omap_set_gpio_direction(bank, offset, 1);
 480         }
 481         bank->irq_usage |= BIT(offset);
 482 }
 483
 484 static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
 485 {
 486         struct gpio_bank *bank = omap_irq_data_get_bank(d);
 487         int retval;
 488         unsigned long flags;
 489         unsigned offset = d->hwirq;
 490
 491         if (!BANK_USED(bank))
 492                 pm_runtime_get_sync(bank->dev);
 493
 494         if (type & ~IRQ_TYPE_SENSE_MASK)
 495                 return -EINVAL;
 496
 497         if (!bank->regs->leveldetect0 &&
 498                 (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
 499                 return -EINVAL;
 500
 501         spin_lock_irqsave(&bank->lock, flags);
 502         retval = omap_set_gpio_triggering(bank, offset, type);
 503         omap_gpio_init_irq(bank, offset);
 504         if (!omap_gpio_is_input(bank, offset)) {
 505                 spin_unlock_irqrestore(&bank->lock, flags);
 506                 return -EINVAL;
 507         }
 508         spin_unlock_irqrestore(&bank->lock, flags);
 509
 510         if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
 511                 __irq_set_handler_locked(d->irq, handle_level_irq);
 512         else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 513                 __irq_set_handler_locked(d->irq, handle_edge_irq);
 514
 515         return retval;
 516 }
 517
 518 static void omap_clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 519 {
 520         void __iomem *reg = bank->base;
 521
 522         reg += bank->regs->irqstatus;
 523         writel_relaxed(gpio_mask, reg);
 524
 525         /* Workaround for clearing DSP GPIO interrupts to allow retention */
 526         if (bank->regs->irqstatus2) {
 527                 reg = bank->base + bank->regs->irqstatus2;
 528                 writel_relaxed(gpio_mask, reg);
 529         }
 530
 531         /* Flush posted write for the irq status to avoid spurious interrupts */
 532         readl_relaxed(reg);
 533 }
 534
 535 static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank,
 536                                              unsigned offset)
 537 {
 538         omap_clear_gpio_irqbank(bank, BIT(offset));
 539 }
 540
 541 static u32 omap_get_gpio_irqbank_mask(struct gpio_bank *bank)
 542 {
 543         void __iomem *reg = bank->base;
 544         u32 l;
 545         u32 mask = (BIT(bank->width)) - 1;
 546
 547         reg += bank->regs->irqenable;
 548         l = readl_relaxed(reg);
 549         if (bank->regs->irqenable_inv)
 550                 l = ~l;
 551         l &= mask;
 552         return l;
 553 }
 554
 555 static void omap_enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 556 {
 557         void __iomem *reg = bank->base;
 558         u32 l;
 559
 560         if (bank->regs->set_irqenable) {
 561                 reg += bank->regs->set_irqenable;
 562                 l = gpio_mask;
 563                 bank->context.irqenable1 |= gpio_mask;
 564         } else {
 565                 reg += bank->regs->irqenable;
 566                 l = readl_relaxed(reg);
 567                 if (bank->regs->irqenable_inv)
 568                         l &= ~gpio_mask;
 569                 else
 570                         l |= gpio_mask;
 571                 bank->context.irqenable1 = l;
 572         }
 573
 574         writel_relaxed(l, reg);
 575 }
 576
 577 static void omap_disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 578 {
 579         void __iomem *reg = bank->base;
 580         u32 l;
 581
 582         if (bank->regs->clr_irqenable) {
 583                 reg += bank->regs->clr_irqenable;
 584                 l = gpio_mask;
 585                 bank->context.irqenable1 &= ~gpio_mask;
 586         } else {
 587                 reg += bank->regs->irqenable;
 588                 l = readl_relaxed(reg);
 589                 if (bank->regs->irqenable_inv)
 590                         l |= gpio_mask;
 591                 else
 592                         l &= ~gpio_mask;
 593                 bank->context.irqenable1 = l;
 594         }
 595
 596         writel_relaxed(l, reg);
 597 }
 598
 599 static inline void omap_set_gpio_irqenable(struct gpio_bank *bank,
 600                                            unsigned offset, int enable)
 601 {
 602         if (enable)
 603                 omap_enable_gpio_irqbank(bank, BIT(offset));
 604         else
 605                 omap_disable_gpio_irqbank(bank, BIT(offset));
 606 }
 607
 608 /*
 609  * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
 610  * 1510 does not seem to have a wake-up register. If JTAG is connected
 611  * to the target, system will wake up always on GPIO events. While
 612  * system is running all registered GPIO interrupts need to have wake-up
 613  * enabled. When system is suspended, only selected GPIO interrupts need
 614  * to have wake-up enabled.
 615  */
 616 static int omap_set_gpio_wakeup(struct gpio_bank *bank, unsigned offset,
 617                                 int enable)
 618 {
 619         u32 gpio_bit = BIT(offset);
 620         unsigned long flags;
 621
 622         if (bank->non_wakeup_gpios & gpio_bit) {
 623                 dev_err(bank->dev,
 624                         "Unable to modify wakeup on non-wakeup GPIO%d\n",
 625                         offset);
 626                 return -EINVAL;
 627         }
 628
 629         spin_lock_irqsave(&bank->lock, flags);
 630         if (enable)
 631                 bank->context.wake_en |= gpio_bit;
 632         else
 633                 bank->context.wake_en &= ~gpio_bit;
 634
 635         writel_relaxed(bank->context.wake_en, bank->base + bank->regs->wkup_en);
 636         spin_unlock_irqrestore(&bank->lock, flags);
 637
 638         return 0;
 639 }
 640
 641 static void omap_reset_gpio(struct gpio_bank *bank, unsigned offset)
 642 {
 643         omap_set_gpio_direction(bank, offset, 1);
 644         omap_set_gpio_irqenable(bank, offset, 0);
 645         omap_clear_gpio_irqstatus(bank, offset);
 646         omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
 647         omap_clear_gpio_debounce(bank, offset);
 648 }
 649
 650 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
 651 static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
 652 {
 653         struct gpio_bank *bank = omap_irq_data_get_bank(d);
 654         unsigned offset = d->hwirq;
 655
 656         return omap_set_gpio_wakeup(bank, offset, enable);
 657 }
 658
 659 static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 660 {
 661         struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
 662         unsigned long flags;
 663
 664         /*
 665          * If this is the first gpio_request for the bank,
 666          * enable the bank module.
 667          */
 668         if (!BANK_USED(bank))
 669                 pm_runtime_get_sync(bank->dev);
 670
 671         spin_lock_irqsave(&bank->lock, flags);
 672         /* Set trigger to none. You need to enable the desired trigger with
 673          * request_irq() or set_irq_type(). Only do this if the IRQ line has
 674          * not already been requested.
 675          */
 676         if (!LINE_USED(bank->irq_usage, offset)) {
 677                 omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
 678                 omap_enable_gpio_module(bank, offset);
 679         }
 680         bank->mod_usage |= BIT(offset);
 681         spin_unlock_irqrestore(&bank->lock, flags);
 682
 683         return 0;
 684 }
 685
 686 static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 687 {
 688         struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
 689         unsigned long flags;
 690
 691         spin_lock_irqsave(&bank->lock, flags);
 692         bank->mod_usage &= ~(BIT(offset));
 693         omap_disable_gpio_module(bank, offset);
 694         omap_reset_gpio(bank, offset);
 695         spin_unlock_irqrestore(&bank->lock, flags);
 696
 697         /*
 698          * If this is the last gpio to be freed in the bank,
 699          * disable the bank module.
 700          */
 701         if (!BANK_USED(bank))
 702                 pm_runtime_put(bank->dev);
 703 }
 704
 705 /*
 706  * We need to unmask the GPIO bank interrupt as soon as possible to
 707  * avoid missing GPIO interrupts for other lines in the bank.
 708  * Then we need to mask-read-clear-unmask the triggered GPIO lines
 709  * in the bank to avoid missing nested interrupts for a GPIO line.
 710  * If we wait to unmask individual GPIO lines in the bank after the
 711  * line's interrupt handler has been run, we may miss some nested
 712  * interrupts.
 713  */
 714 static void omap_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 715 {
 716         void __iomem *isr_reg = NULL;
 717         u32 isr;
 718         unsigned int bit;
 719         struct gpio_bank *bank;
 720         int unmasked = 0;
 721         struct irq_chip *irqchip = irq_desc_get_chip(desc);
 722         struct gpio_chip *chip = irq_get_handler_data(irq);
 723
 724         chained_irq_enter(irqchip, desc);
 725
 726         bank = container_of(chip, struct gpio_bank, chip);
 727         isr_reg = bank->base + bank->regs->irqstatus;
 728         pm_runtime_get_sync(bank->dev);
 729
 730         if (WARN_ON(!isr_reg))
 731                 goto exit;
 732
 733         while (1) {
 734                 u32 isr_saved, level_mask = 0;
 735                 u32 enabled;
 736
 737                 enabled = omap_get_gpio_irqbank_mask(bank);
 738                 isr_saved = isr = readl_relaxed(isr_reg) & enabled;
 739
 740                 if (bank->level_mask)
 741                         level_mask = bank->level_mask & enabled;
 742
 743                 /* clear edge sensitive interrupts before handler(s) are
 744                 called so that we don't miss any interrupt occurred while
 745                 executing them */
 746                 omap_disable_gpio_irqbank(bank, isr_saved & ~level_mask);
 747                 omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
 748                 omap_enable_gpio_irqbank(bank, isr_saved & ~level_mask);
 749
 750                 /* if there is only edge sensitive GPIO pin interrupts
 751                 configured, we could unmask GPIO bank interrupt immediately */
 752                 if (!level_mask && !unmasked) {
 753                         unmasked = 1;
 754                         chained_irq_exit(irqchip, desc);
 755                 }
 756
 757                 if (!isr)
 758                         break;
 759
 760                 while (isr) {
 761                         bit = __ffs(isr);
 762                         isr &= ~(BIT(bit));
 763
 764                         /*
 765                          * Some chips can't respond to both rising and falling
 766                          * at the same time.  If this irq was requested with
 767                          * both flags, we need to flip the ICR data for the IRQ
 768                          * to respond to the IRQ for the opposite direction.
 769                          * This will be indicated in the bank toggle_mask.
 770                          */
 771                         if (bank->toggle_mask & (BIT(bit)))
 772                                 omap_toggle_gpio_edge_triggering(bank, bit);
 773
 774                         generic_handle_irq(irq_find_mapping(bank->chip.irqdomain,
 775                                                             bit));
 776                 }
 777         }
 778         /* if bank has any level sensitive GPIO pin interrupt
 779         configured, we must unmask the bank interrupt only after
 780         handler(s) are executed in order to avoid spurious bank
 781         interrupt */
 782 exit:
 783         if (!unmasked)
 784                 chained_irq_exit(irqchip, desc);
 785         pm_runtime_put(bank->dev);
 786 }
 787
 788 static unsigned int omap_gpio_irq_startup(struct irq_data *d)
 789 {
 790         struct gpio_bank *bank = omap_irq_data_get_bank(d);
 791         unsigned long flags;
 792         unsigned offset = d->hwirq;
 793
 794         if (!BANK_USED(bank))
 795                 pm_runtime_get_sync(bank->dev);
 796
 797         spin_lock_irqsave(&bank->lock, flags);
 798         omap_gpio_init_irq(bank, offset);
 799         spin_unlock_irqrestore(&bank->lock, flags);
 800         omap_gpio_unmask_irq(d);
 801
 802         return 0;
 803 }
 804
 805 static void omap_gpio_irq_shutdown(struct irq_data *d)
 806 {
 807         struct gpio_bank *bank = omap_irq_data_get_bank(d);
 808         unsigned long flags;
 809         unsigned offset = d->hwirq;
 810
 811         spin_lock_irqsave(&bank->lock, flags);
 812         bank->irq_usage &= ~(BIT(offset));
 813         omap_disable_gpio_module(bank, offset);
 814         omap_reset_gpio(bank, offset);
 815         spin_unlock_irqrestore(&bank->lock, flags);
 816
 817         /*
 818          * If this is the last IRQ to be freed in the bank,
 819          * disable the bank module.
 820          */
 821         if (!BANK_USED(bank))
 822                 pm_runtime_put(bank->dev);
 823 }
 824
 825 static void omap_gpio_ack_irq(struct irq_data *d)
 826 {
 827         struct gpio_bank *bank = omap_irq_data_get_bank(d);
 828         unsigned offset = d->hwirq;
 829
 830         omap_clear_gpio_irqstatus(bank, offset);
 831 }
 832
 833 static void omap_gpio_mask_irq(struct irq_data *d)
 834 {
 835         struct gpio_bank *bank = omap_irq_data_get_bank(d);
 836         unsigned offset = d->hwirq;
 837         unsigned long flags;
 838
 839         spin_lock_irqsave(&bank->lock, flags);
 840         omap_set_gpio_irqenable(bank, offset, 0);
 841         omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
 842         spin_unlock_irqrestore(&bank->lock, flags);
 843 }
 844
 845 static void omap_gpio_unmask_irq(struct irq_data *d)
 846 {
 847         struct gpio_bank *bank = omap_irq_data_get_bank(d);
 848         unsigned offset = d->hwirq;
 849         u32 trigger = irqd_get_trigger_type(d);
 850         unsigned long flags;
 851
 852         spin_lock_irqsave(&bank->lock, flags);
 853         if (trigger)
 854                 omap_set_gpio_triggering(bank, offset, trigger);
 855
 856         /* For level-triggered GPIOs, the clearing must be done after
 857          * the HW source is cleared, thus after the handler has run */
 858         if (bank->level_mask & BIT(offset)) {
 859                 omap_set_gpio_irqenable(bank, offset, 0);
 860                 omap_clear_gpio_irqstatus(bank, offset);
 861         }
 862
 863         omap_set_gpio_irqenable(bank, offset, 1);
 864         spin_unlock_irqrestore(&bank->lock, flags);
 865 }
 866
 867 /*---------------------------------------------------------------------*/
 868
 869 static int omap_mpuio_suspend_noirq(struct device *dev)
 870 {
 871         struct platform_device *pdev = to_platform_device(dev);
 872         struct gpio_bank        *bank = platform_get_drvdata(pdev);
 873         void __iomem            *mask_reg = bank->base +
 874                                         OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 875         unsigned long           flags;
 876
 877         spin_lock_irqsave(&bank->lock, flags);
 878         writel_relaxed(0xffff & ~bank->context.wake_en, mask_reg);
 879         spin_unlock_irqrestore(&bank->lock, flags);
 880
 881         return 0;
 882 }
 883
 884 static int omap_mpuio_resume_noirq(struct device *dev)
 885 {
 886         struct platform_device *pdev = to_platform_device(dev);
 887         struct gpio_bank        *bank = platform_get_drvdata(pdev);
 888         void __iomem            *mask_reg = bank->base +
 889                                         OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 890         unsigned long           flags;
 891
 892         spin_lock_irqsave(&bank->lock, flags);
 893         writel_relaxed(bank->context.wake_en, mask_reg);
 894         spin_unlock_irqrestore(&bank->lock, flags);
 895
 896         return 0;
 897 }
 898
 899 static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
 900         .suspend_noirq = omap_mpuio_suspend_noirq,
 901         .resume_noirq = omap_mpuio_resume_noirq,
 902 };
 903
 904 /* use platform_driver for this. */
 905 static struct platform_driver omap_mpuio_driver = {
 906         .driver         = {
 907                 .name   = "mpuio",
 908                 .pm     = &omap_mpuio_dev_pm_ops,
 909         },
 910 };
 911
 912 static struct platform_device omap_mpuio_device = {
 913         .name           = "mpuio",
 914         .id             = -1,
 915         .dev = {
 916                 .driver = &omap_mpuio_driver.driver,
 917         }
 918         /* could list the /proc/iomem resources */
 919 };
 920
 921 static inline void omap_mpuio_init(struct gpio_bank *bank)
 922 {
 923         platform_set_drvdata(&omap_mpuio_device, bank);
 924
 925         if (platform_driver_register(&omap_mpuio_driver) == 0)
 926                 (void) platform_device_register(&omap_mpuio_device);
 927 }
 928
 929 /*---------------------------------------------------------------------*/
 930
 931 static int omap_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 932 {
 933         struct gpio_bank *bank;
 934         unsigned long flags;
 935         void __iomem *reg;
 936         int dir;
 937
 938         bank = container_of(chip, struct gpio_bank, chip);
 939         reg = bank->base + bank->regs->direction;
 940         spin_lock_irqsave(&bank->lock, flags);
 941         dir = !!(readl_relaxed(reg) & BIT(offset));
 942         spin_unlock_irqrestore(&bank->lock, flags);
 943         return dir;
 944 }
 945
 946 static int omap_gpio_input(struct gpio_chip *chip, unsigned offset)
 947 {
 948         struct gpio_bank *bank;
 949         unsigned long flags;
 950
 951         bank = container_of(chip, struct gpio_bank, chip);
 952         spin_lock_irqsave(&bank->lock, flags);
 953         omap_set_gpio_direction(bank, offset, 1);
 954         spin_unlock_irqrestore(&bank->lock, flags);
 955         return 0;
 956 }
 957
 958 static int omap_gpio_get(struct gpio_chip *chip, unsigned offset)
 959 {
 960         struct gpio_bank *bank;
 961
 962         bank = container_of(chip, struct gpio_bank, chip);
 963
 964         if (omap_gpio_is_input(bank, offset))
 965                 return omap_get_gpio_datain(bank, offset);
 966         else
 967                 return omap_get_gpio_dataout(bank, offset);
 968 }
 969
 970 static int omap_gpio_output(struct gpio_chip *chip, unsigned offset, int value)
 971 {
 972         struct gpio_bank *bank;
 973         unsigned long flags;
 974
 975         bank = container_of(chip, struct gpio_bank, chip);
 976         spin_lock_irqsave(&bank->lock, flags);
 977         bank->set_dataout(bank, offset, value);
 978         omap_set_gpio_direction(bank, offset, 0);
 979         spin_unlock_irqrestore(&bank->lock, flags);
 980         return 0;
 981 }
 982
 983 static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset,
 984                               unsigned debounce)
 985 {
 986         struct gpio_bank *bank;
 987         unsigned long flags;
 988
 989         bank = container_of(chip, struct gpio_bank, chip);
 990
 991         spin_lock_irqsave(&bank->lock, flags);
 992         omap2_set_gpio_debounce(bank, offset, debounce);
 993         spin_unlock_irqrestore(&bank->lock, flags);
 994
 995         return 0;
 996 }
 997
 998 static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 999 {
1000         struct gpio_bank *bank;
1001         unsigned long flags;
1002
1003         bank = container_of(chip, struct gpio_bank, chip);
1004         spin_lock_irqsave(&bank->lock, flags);
1005         bank->set_dataout(bank, offset, value);
1006         spin_unlock_irqrestore(&bank->lock, flags);
1007 }
1008
1009 /*---------------------------------------------------------------------*/
1010
1011 static void __init omap_gpio_show_rev(struct gpio_bank *bank)
1012 {
1013         static bool called;
1014         u32 rev;
1015
1016         if (called || bank->regs->revision == USHRT_MAX)
1017                 return;
1018
1019         rev = readw_relaxed(bank->base + bank->regs->revision);
1020         pr_info("OMAP GPIO hardware version %d.%d\n",
1021                 (rev >> 4) & 0x0f, rev & 0x0f);
1022
1023         called = true;
1024 }
1025
1026 static void omap_gpio_mod_init(struct gpio_bank *bank)
1027 {
1028         void __iomem *base = bank->base;
1029         u32 l = 0xffffffff;
1030
1031         if (bank->width == 16)
1032                 l = 0xffff;
1033
1034         if (bank->is_mpuio) {
1035                 writel_relaxed(l, bank->base + bank->regs->irqenable);
1036                 return;
1037         }
1038
1039         omap_gpio_rmw(base, bank->regs->irqenable, l,
1040                       bank->regs->irqenable_inv);
1041         omap_gpio_rmw(base, bank->regs->irqstatus, l,
1042                       !bank->regs->irqenable_inv);
1043         if (bank->regs->debounce_en)
1044                 writel_relaxed(0, base + bank->regs->debounce_en);
1045
1046         /* Save OE default value (0xffffffff) in the context */
1047         bank->context.oe = readl_relaxed(bank->base + bank->regs->direction);
1048          /* Initialize interface clk ungated, module enabled */
1049         if (bank->regs->ctrl)
1050                 writel_relaxed(0, base + bank->regs->ctrl);
1051
1052         bank->dbck = clk_get(bank->dev, "dbclk");
1053         if (IS_ERR(bank->dbck))
1054                 dev_err(bank->dev, "Could not get gpio dbck\n");
1055 }
1056
1057 static void
1058 omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
1059                     unsigned int num)
1060 {
1061         struct irq_chip_generic *gc;
1062         struct irq_chip_type *ct;
1063
1064         gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
1065                                     handle_simple_irq);
1066         if (!gc) {
1067                 dev_err(bank->dev, "Memory alloc failed for gc\n");
1068                 return;
1069         }
1070
1071         ct = gc->chip_types;
1072
1073         /* NOTE: No ack required, reading IRQ status clears it. */
1074         ct->chip.irq_mask = irq_gc_mask_set_bit;
1075         ct->chip.irq_unmask = irq_gc_mask_clr_bit;
1076         ct->chip.irq_set_type = omap_gpio_irq_type;
1077
1078         if (bank->regs->wkup_en)
1079                 ct->chip.irq_set_wake = omap_gpio_wake_enable;
1080
1081         ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
1082         irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
1083                                IRQ_NOREQUEST | IRQ_NOPROBE, 0);
1084 }
1085
1086 static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
1087 {
1088         int j;
1089         static int gpio;
1090         int irq_base = 0;
1091         int ret;
1092
1093         /*
1094          * REVISIT eventually switch from OMAP-specific gpio structs
1095          * over to the generic ones
1096          */
1097         bank->chip.request = omap_gpio_request;
1098         bank->chip.free = omap_gpio_free;
1099         bank->chip.get_direction = omap_gpio_get_direction;
1100         bank->chip.direction_input = omap_gpio_input;
1101         bank->chip.get = omap_gpio_get;
1102         bank->chip.direction_output = omap_gpio_output;
1103         bank->chip.set_debounce = omap_gpio_debounce;
1104         bank->chip.set = omap_gpio_set;
1105         if (bank->is_mpuio) {
1106                 bank->chip.label = "mpuio";
1107                 if (bank->regs->wkup_en)
1108                         bank->chip.dev = &omap_mpuio_device.dev;
1109                 bank->chip.base = OMAP_MPUIO(0);
1110         } else {
1111                 bank->chip.label = "gpio";
1112                 bank->chip.base = gpio;
1113                 gpio += bank->width;
1114         }
1115         bank->chip.ngpio = bank->width;
1116
1117         ret = gpiochip_add(&bank->chip);
1118         if (ret) {
1119                 dev_err(bank->dev, "Could not register gpio chip %d\n", ret);
1120                 return ret;
1121         }
1122
1123 #ifdef CONFIG_ARCH_OMAP1
1124         /*
1125          * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
1126          * irq_alloc_descs() since a base IRQ offset will no longer be needed.
1127          */
1128         irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
1129         if (irq_base < 0) {
1130                 dev_err(bank->dev, "Couldn't allocate IRQ numbers\n");
1131                 return -ENODEV;
1132         }
1133 #endif
1134
1135         ret = gpiochip_irqchip_add(&bank->chip, irqc,
1136                                    irq_base, omap_gpio_irq_handler,
1137                                    IRQ_TYPE_NONE);
1138
1139         if (ret) {
1140                 dev_err(bank->dev, "Couldn't add irqchip to gpiochip %d\n", ret);
1141                 gpiochip_remove(&bank->chip);
1142                 return -ENODEV;
1143         }
1144
1145         gpiochip_set_chained_irqchip(&bank->chip, irqc,
1146                                      bank->irq, omap_gpio_irq_handler);
1147
1148         for (j = 0; j < bank->width; j++) {
1149                 int irq = irq_find_mapping(bank->chip.irqdomain, j);
1150                 if (bank->is_mpuio) {
1151                         omap_mpuio_alloc_gc(bank, irq, bank->width);
1152                         irq_set_chip_and_handler(irq, NULL, NULL);
1153                         set_irq_flags(irq, 0);
1154                 }
1155         }
1156
1157         return 0;
1158 }
1159
1160 static const struct of_device_id omap_gpio_match[];
1161
1162 static int omap_gpio_probe(struct platform_device *pdev)
1163 {
1164         struct device *dev = &pdev->dev;
1165         struct device_node *node = dev->of_node;
1166         const struct of_device_id *match;
1167         const struct omap_gpio_platform_data *pdata;
1168         struct resource *res;
1169         struct gpio_bank *bank;
1170         struct irq_chip *irqc;
1171         int ret;
1172
1173         match = of_match_device(of_match_ptr(omap_gpio_match), dev);
1174
1175         pdata = match ? match->data : dev_get_platdata(dev);
1176         if (!pdata)
1177                 return -EINVAL;
1178
1179         bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
1180         if (!bank) {
1181                 dev_err(dev, "Memory alloc failed\n");
1182                 return -ENOMEM;
1183         }
1184
1185         irqc = devm_kzalloc(dev, sizeof(*irqc), GFP_KERNEL);
1186         if (!irqc)
1187                 return -ENOMEM;
1188
1189         irqc->irq_startup = omap_gpio_irq_startup,
1190         irqc->irq_shutdown = omap_gpio_irq_shutdown,
1191         irqc->irq_ack = omap_gpio_ack_irq,
1192         irqc->irq_mask = omap_gpio_mask_irq,
1193         irqc->irq_unmask = omap_gpio_unmask_irq,
1194         irqc->irq_set_type = omap_gpio_irq_type,
1195         irqc->irq_set_wake = omap_gpio_wake_enable,
1196         irqc->name = dev_name(&pdev->dev);
1197
1198         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1199         if (unlikely(!res)) {
1200                 dev_err(dev, "Invalid IRQ resource\n");
1201                 return -ENODEV;
1202         }
1203
1204         bank->irq = res->start;
1205         bank->dev = dev;
1206         bank->chip.dev = dev;
1207         bank->dbck_flag = pdata->dbck_flag;
1208         bank->stride = pdata->bank_stride;
1209         bank->width = pdata->bank_width;
1210         bank->is_mpuio = pdata->is_mpuio;
1211         bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
1212         bank->regs = pdata->regs;
1213 #ifdef CONFIG_OF_GPIO
1214         bank->chip.of_node = of_node_get(node);
1215 #endif
1216         if (node) {
1217                 if (!of_property_read_bool(node, "ti,gpio-always-on"))
1218                         bank->loses_context = true;
1219         } else {
1220                 bank->loses_context = pdata->loses_context;
1221
1222                 if (bank->loses_context)
1223                         bank->get_context_loss_count =
1224                                 pdata->get_context_loss_count;
1225         }
1226
1227         if (bank->regs->set_dataout && bank->regs->clr_dataout)
1228                 bank->set_dataout = omap_set_gpio_dataout_reg;
1229         else
1230                 bank->set_dataout = omap_set_gpio_dataout_mask;
1231
1232         spin_lock_init(&bank->lock);
1233
1234         /* Static mapping, never released */
1235         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1236         bank->base = devm_ioremap_resource(dev, res);
1237         if (IS_ERR(bank->base)) {
1238                 irq_domain_remove(bank->chip.irqdomain);
1239                 return PTR_ERR(bank->base);
1240         }
1241
1242         platform_set_drvdata(pdev, bank);
1243
1244         pm_runtime_enable(bank->dev);
1245         pm_runtime_irq_safe(bank->dev);
1246         pm_runtime_get_sync(bank->dev);
1247
1248         if (bank->is_mpuio)
1249                 omap_mpuio_init(bank);
1250
1251         omap_gpio_mod_init(bank);
1252
1253         ret = omap_gpio_chip_init(bank, irqc);
1254         if (ret)
1255                 return ret;
1256
1257         omap_gpio_show_rev(bank);
1258
1259         pm_runtime_put(bank->dev);
1260
1261         list_add_tail(&bank->node, &omap_gpio_list);
1262
1263         return 0;
1264 }
1265
1266 #ifdef CONFIG_ARCH_OMAP2PLUS
1267
1268 #if defined(CONFIG_PM)
1269 static void omap_gpio_restore_context(struct gpio_bank *bank);
1270
1271 static int omap_gpio_runtime_suspend(struct device *dev)
1272 {
1273         struct platform_device *pdev = to_platform_device(dev);
1274         struct gpio_bank *bank = platform_get_drvdata(pdev);
1275         u32 l1 = 0, l2 = 0;
1276         unsigned long flags;
1277         u32 wake_low, wake_hi;
1278
1279         spin_lock_irqsave(&bank->lock, flags);
1280
1281         /*
1282          * Only edges can generate a wakeup event to the PRCM.
1283          *
1284          * Therefore, ensure any wake-up capable GPIOs have
1285          * edge-detection enabled before going idle to ensure a wakeup
1286          * to the PRCM is generated on a GPIO transition. (c.f. 34xx
1287          * NDA TRM 25.5.3.1)
1288          *
1289          * The normal values will be restored upon ->runtime_resume()
1290          * by writing back the values saved in bank->context.
1291          */
1292         wake_low = bank->context.leveldetect0 & bank->context.wake_en;
1293         if (wake_low)
1294                 writel_relaxed(wake_low | bank->context.fallingdetect,
1295                              bank->base + bank->regs->fallingdetect);
1296         wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
1297         if (wake_hi)
1298                 writel_relaxed(wake_hi | bank->context.risingdetect,
1299                              bank->base + bank->regs->risingdetect);
1300
1301         if (!bank->enabled_non_wakeup_gpios)
1302                 goto update_gpio_context_count;
1303
1304         if (bank->power_mode != OFF_MODE) {
1305                 bank->power_mode = 0;
1306                 goto update_gpio_context_count;
1307         }
1308         /*
1309          * If going to OFF, remove triggering for all
1310          * non-wakeup GPIOs.  Otherwise spurious IRQs will be
1311          * generated.  See OMAP2420 Errata item 1.101.
1312          */
1313         bank->saved_datain = readl_relaxed(bank->base +
1314                                                 bank->regs->datain);
1315         l1 = bank->context.fallingdetect;
1316         l2 = bank->context.risingdetect;
1317
1318         l1 &= ~bank->enabled_non_wakeup_gpios;
1319         l2 &= ~bank->enabled_non_wakeup_gpios;
1320
1321         writel_relaxed(l1, bank->base + bank->regs->fallingdetect);
1322         writel_relaxed(l2, bank->base + bank->regs->risingdetect);
1323
1324         bank->workaround_enabled = true;
1325
1326 update_gpio_context_count:
1327         if (bank->get_context_loss_count)
1328                 bank->context_loss_count =
1329                                 bank->get_context_loss_count(bank->dev);
1330
1331         omap_gpio_dbck_disable(bank);
1332         spin_unlock_irqrestore(&bank->lock, flags);
1333
1334         return 0;
1335 }
1336
1337 static void omap_gpio_init_context(struct gpio_bank *p);
1338
1339 static int omap_gpio_runtime_resume(struct device *dev)
1340 {
1341         struct platform_device *pdev = to_platform_device(dev);
1342         struct gpio_bank *bank = platform_get_drvdata(pdev);
1343         u32 l = 0, gen, gen0, gen1;
1344         unsigned long flags;
1345         int c;
1346
1347         spin_lock_irqsave(&bank->lock, flags);
1348
1349         /*
1350          * On the first resume during the probe, the context has not
1351          * been initialised and so initialise it now. Also initialise
1352          * the context loss count.
1353          */
1354         if (bank->loses_context && !bank->context_valid) {
1355                 omap_gpio_init_context(bank);
1356
1357                 if (bank->get_context_loss_count)
1358                         bank->context_loss_count =
1359                                 bank->get_context_loss_count(bank->dev);
1360         }
1361
1362         omap_gpio_dbck_enable(bank);
1363
1364         /*
1365          * In ->runtime_suspend(), level-triggered, wakeup-enabled
1366          * GPIOs were set to edge trigger also in order to be able to
1367          * generate a PRCM wakeup.  Here we restore the
1368          * pre-runtime_suspend() values for edge triggering.
1369          */
1370         writel_relaxed(bank->context.fallingdetect,
1371                      bank->base + bank->regs->fallingdetect);
1372         writel_relaxed(bank->context.risingdetect,
1373                      bank->base + bank->regs->risingdetect);
1374
1375         if (bank->loses_context) {
1376                 if (!bank->get_context_loss_count) {
1377                         omap_gpio_restore_context(bank);
1378                 } else {
1379                         c = bank->get_context_loss_count(bank->dev);
1380                         if (c != bank->context_loss_count) {
1381                                 omap_gpio_restore_context(bank);
1382                         } else {
1383                                 spin_unlock_irqrestore(&bank->lock, flags);
1384                                 return 0;
1385                         }
1386                 }
1387         }
1388
1389         if (!bank->workaround_enabled) {
1390                 spin_unlock_irqrestore(&bank->lock, flags);
1391                 return 0;
1392         }
1393
1394         l = readl_relaxed(bank->base + bank->regs->datain);
1395
1396         /*
1397          * Check if any of the non-wakeup interrupt GPIOs have changed
1398          * state.  If so, generate an IRQ by software.  This is
1399          * horribly racy, but it's the best we can do to work around
1400          * this silicon bug.
1401          */
1402         l ^= bank->saved_datain;
1403         l &= bank->enabled_non_wakeup_gpios;
1404
1405         /*
1406          * No need to generate IRQs for the rising edge for gpio IRQs
1407          * configured with falling edge only; and vice versa.
1408          */
1409         gen0 = l & bank->context.fallingdetect;
1410         gen0 &= bank->saved_datain;
1411
1412         gen1 = l & bank->context.risingdetect;
1413         gen1 &= ~(bank->saved_datain);
1414
1415         /* FIXME: Consider GPIO IRQs with level detections properly! */
1416         gen = l & (~(bank->context.fallingdetect) &
1417                                          ~(bank->context.risingdetect));
1418         /* Consider all GPIO IRQs needed to be updated */
1419         gen |= gen0 | gen1;
1420
1421         if (gen) {
1422                 u32 old0, old1;
1423
1424                 old0 = readl_relaxed(bank->base + bank->regs->leveldetect0);
1425                 old1 = readl_relaxed(bank->base + bank->regs->leveldetect1);
1426
1427                 if (!bank->regs->irqstatus_raw0) {
1428                         writel_relaxed(old0 | gen, bank->base +
1429                                                 bank->regs->leveldetect0);
1430                         writel_relaxed(old1 | gen, bank->base +
1431                                                 bank->regs->leveldetect1);
1432                 }
1433
1434                 if (bank->regs->irqstatus_raw0) {
1435                         writel_relaxed(old0 | l, bank->base +
1436                                                 bank->regs->leveldetect0);
1437                         writel_relaxed(old1 | l, bank->base +
1438                                                 bank->regs->leveldetect1);
1439                 }
1440                 writel_relaxed(old0, bank->base + bank->regs->leveldetect0);
1441                 writel_relaxed(old1, bank->base + bank->regs->leveldetect1);
1442         }
1443
1444         bank->workaround_enabled = false;
1445         spin_unlock_irqrestore(&bank->lock, flags);
1446
1447         return 0;
1448 }
1449 #endif /* CONFIG_PM */
1450
1451 void omap2_gpio_prepare_for_idle(int pwr_mode)
1452 {
1453         struct gpio_bank *bank;
1454
1455         list_for_each_entry(bank, &omap_gpio_list, node) {
1456                 if (!BANK_USED(bank) || !bank->loses_context)
1457                         continue;
1458
1459                 bank->power_mode = pwr_mode;
1460
1461                 pm_runtime_put_sync_suspend(bank->dev);
1462         }
1463 }
1464
1465 void omap2_gpio_resume_after_idle(void)
1466 {
1467         struct gpio_bank *bank;
1468
1469         list_for_each_entry(bank, &omap_gpio_list, node) {
1470                 if (!BANK_USED(bank) || !bank->loses_context)
1471                         continue;
1472
1473                 pm_runtime_get_sync(bank->dev);
1474         }
1475 }
1476
1477 #if defined(CONFIG_PM)
1478 static void omap_gpio_init_context(struct gpio_bank *p)
1479 {
1480         struct omap_gpio_reg_offs *regs = p->regs;
1481         void __iomem *base = p->base;
1482
1483         p->context.ctrl         = readl_relaxed(base + regs->ctrl);
1484         p->context.oe           = readl_relaxed(base + regs->direction);
1485         p->context.wake_en      = readl_relaxed(base + regs->wkup_en);
1486         p->context.leveldetect0 = readl_relaxed(base + regs->leveldetect0);
1487         p->context.leveldetect1 = readl_relaxed(base + regs->leveldetect1);
1488         p->context.risingdetect = readl_relaxed(base + regs->risingdetect);
1489         p->context.fallingdetect = readl_relaxed(base + regs->fallingdetect);
1490         p->context.irqenable1   = readl_relaxed(base + regs->irqenable);
1491         p->context.irqenable2   = readl_relaxed(base + regs->irqenable2);
1492
1493         if (regs->set_dataout && p->regs->clr_dataout)
1494                 p->context.dataout = readl_relaxed(base + regs->set_dataout);
1495         else
1496                 p->context.dataout = readl_relaxed(base + regs->dataout);
1497
1498         p->context_valid = true;
1499 }
1500
1501 static void omap_gpio_restore_context(struct gpio_bank *bank)
1502 {
1503         writel_relaxed(bank->context.wake_en,
1504                                 bank->base + bank->regs->wkup_en);
1505         writel_relaxed(bank->context.ctrl, bank->base + bank->regs->ctrl);
1506         writel_relaxed(bank->context.leveldetect0,
1507                                 bank->base + bank->regs->leveldetect0);
1508         writel_relaxed(bank->context.leveldetect1,
1509                                 bank->base + bank->regs->leveldetect1);
1510         writel_relaxed(bank->context.risingdetect,
1511                                 bank->base + bank->regs->risingdetect);
1512         writel_relaxed(bank->context.fallingdetect,
1513                                 bank->base + bank->regs->fallingdetect);
1514         if (bank->regs->set_dataout && bank->regs->clr_dataout)
1515                 writel_relaxed(bank->context.dataout,
1516                                 bank->base + bank->regs->set_dataout);
1517         else
1518                 writel_relaxed(bank->context.dataout,
1519                                 bank->base + bank->regs->dataout);
1520         writel_relaxed(bank->context.oe, bank->base + bank->regs->direction);
1521
1522         if (bank->dbck_enable_mask) {
1523                 writel_relaxed(bank->context.debounce, bank->base +
1524                                         bank->regs->debounce);
1525                 writel_relaxed(bank->context.debounce_en,
1526                                         bank->base + bank->regs->debounce_en);
1527         }
1528
1529         writel_relaxed(bank->context.irqenable1,
1530                                 bank->base + bank->regs->irqenable);
1531         writel_relaxed(bank->context.irqenable2,
1532                                 bank->base + bank->regs->irqenable2);
1533 }
1534 #endif /* CONFIG_PM */
1535 #else
1536 #define omap_gpio_runtime_suspend NULL
1537 #define omap_gpio_runtime_resume NULL
1538 static inline void omap_gpio_init_context(struct gpio_bank *p) {}
1539 #endif
1540
1541 static const struct dev_pm_ops gpio_pm_ops = {
1542         SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
1543                                                                         NULL)
1544 };
1545
1546 #if defined(CONFIG_OF)
1547 static struct omap_gpio_reg_offs omap2_gpio_regs = {
1548         .revision =             OMAP24XX_GPIO_REVISION,
1549         .direction =            OMAP24XX_GPIO_OE,
1550         .datain =               OMAP24XX_GPIO_DATAIN,
1551         .dataout =              OMAP24XX_GPIO_DATAOUT,
1552         .set_dataout =          OMAP24XX_GPIO_SETDATAOUT,
1553         .clr_dataout =          OMAP24XX_GPIO_CLEARDATAOUT,
1554         .irqstatus =            OMAP24XX_GPIO_IRQSTATUS1,
1555         .irqstatus2 =           OMAP24XX_GPIO_IRQSTATUS2,
1556         .irqenable =            OMAP24XX_GPIO_IRQENABLE1,
1557         .irqenable2 =           OMAP24XX_GPIO_IRQENABLE2,
1558         .set_irqenable =        OMAP24XX_GPIO_SETIRQENABLE1,
1559         .clr_irqenable =        OMAP24XX_GPIO_CLEARIRQENABLE1,
1560         .debounce =             OMAP24XX_GPIO_DEBOUNCE_VAL,
1561         .debounce_en =          OMAP24XX_GPIO_DEBOUNCE_EN,
1562         .ctrl =                 OMAP24XX_GPIO_CTRL,
1563         .wkup_en =              OMAP24XX_GPIO_WAKE_EN,
1564         .leveldetect0 =         OMAP24XX_GPIO_LEVELDETECT0,
1565         .leveldetect1 =         OMAP24XX_GPIO_LEVELDETECT1,
1566         .risingdetect =         OMAP24XX_GPIO_RISINGDETECT,
1567         .fallingdetect =        OMAP24XX_GPIO_FALLINGDETECT,
1568 };
1569
1570 static struct omap_gpio_reg_offs omap4_gpio_regs = {
1571         .revision =             OMAP4_GPIO_REVISION,
1572         .direction =            OMAP4_GPIO_OE,
1573         .datain =               OMAP4_GPIO_DATAIN,
1574         .dataout =              OMAP4_GPIO_DATAOUT,
1575         .set_dataout =          OMAP4_GPIO_SETDATAOUT,
1576         .clr_dataout =          OMAP4_GPIO_CLEARDATAOUT,
1577         .irqstatus =            OMAP4_GPIO_IRQSTATUS0,
1578         .irqstatus2 =           OMAP4_GPIO_IRQSTATUS1,
1579         .irqenable =            OMAP4_GPIO_IRQSTATUSSET0,
1580         .irqenable2 =           OMAP4_GPIO_IRQSTATUSSET1,
1581         .set_irqenable =        OMAP4_GPIO_IRQSTATUSSET0,
1582         .clr_irqenable =        OMAP4_GPIO_IRQSTATUSCLR0,
1583         .debounce =             OMAP4_GPIO_DEBOUNCINGTIME,
1584         .debounce_en =          OMAP4_GPIO_DEBOUNCENABLE,
1585         .ctrl =                 OMAP4_GPIO_CTRL,
1586         .wkup_en =              OMAP4_GPIO_IRQWAKEN0,
1587         .leveldetect0 =         OMAP4_GPIO_LEVELDETECT0,
1588         .leveldetect1 =         OMAP4_GPIO_LEVELDETECT1,
1589         .risingdetect =         OMAP4_GPIO_RISINGDETECT,
1590         .fallingdetect =        OMAP4_GPIO_FALLINGDETECT,
1591 };
1592
1593 static const struct omap_gpio_platform_data omap2_pdata = {
1594         .regs = &omap2_gpio_regs,
1595         .bank_width = 32,
1596         .dbck_flag = false,
1597 };
1598
1599 static const struct omap_gpio_platform_data omap3_pdata = {
1600         .regs = &omap2_gpio_regs,
1601         .bank_width = 32,
1602         .dbck_flag = true,
1603 };
1604
1605 static const struct omap_gpio_platform_data omap4_pdata = {
1606         .regs = &omap4_gpio_regs,
1607         .bank_width = 32,
1608         .dbck_flag = true,
1609 };
1610
1611 static const struct of_device_id omap_gpio_match[] = {
1612         {
1613                 .compatible = "ti,omap4-gpio",
1614                 .data = &omap4_pdata,
1615         },
1616         {
1617                 .compatible = "ti,omap3-gpio",
1618                 .data = &omap3_pdata,
1619         },
1620         {
1621                 .compatible = "ti,omap2-gpio",
1622                 .data = &omap2_pdata,
1623         },
1624         { },
1625 };
1626 MODULE_DEVICE_TABLE(of, omap_gpio_match);
1627 #endif
1628
1629 static struct platform_driver omap_gpio_driver = {
1630         .probe          = omap_gpio_probe,
1631         .driver         = {
1632                 .name   = "omap_gpio",
1633                 .pm     = &gpio_pm_ops,
1634                 .of_match_table = of_match_ptr(omap_gpio_match),
1635         },
1636 };
1637
1638 /*
1639  * gpio driver register needs to be done before
1640  * machine_init functions access gpio APIs.
1641  * Hence omap_gpio_drv_reg() is a postcore_initcall.
1642  */
1643 static int __init omap_gpio_drv_reg(void)
1644 {
1645         return platform_driver_register(&omap_gpio_driver);
1646 }
1647 postcore_initcall(omap_gpio_drv_reg);