]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/net/arcnet/arc-rawmode.c
arcnet: Add and remove blank lines
[karo-tx-linux.git] / drivers / net / arcnet / arc-rawmode.c
1 /*
2  * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
3  *
4  * Written 1994-1999 by Avery Pennarun.
5  * Derived from skeleton.c by Donald Becker.
6  *
7  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8  *  for sponsoring the further development of this driver.
9  *
10  * **********************
11  *
12  * The original copyright of skeleton.c was as follows:
13  *
14  * skeleton.c Written 1993 by Donald Becker.
15  * Copyright 1993 United States Government as represented by the
16  * Director, National Security Agency.  This software may only be used
17  * and distributed according to the terms of the GNU General Public License as
18  * modified by SRC, incorporated herein by reference.
19  *
20  * **********************
21  *
22  * For more details, see drivers/net/arcnet.c
23  *
24  * **********************
25  */
26
27 #include <linux/module.h>
28 #include <linux/gfp.h>
29 #include <linux/init.h>
30 #include <linux/if_arp.h>
31 #include <net/arp.h>
32 #include <linux/netdevice.h>
33 #include <linux/skbuff.h>
34 #include <linux/arcdevice.h>
35
36 #define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n"
37
38 static void rx(struct net_device *dev, int bufnum,
39                struct archdr *pkthdr, int length);
40 static int build_header(struct sk_buff *skb, struct net_device *dev,
41                         unsigned short type, uint8_t daddr);
42 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
43                       int bufnum);
44
45 static struct ArcProto rawmode_proto =
46 {
47         .suffix         = 'r',
48         .mtu            = XMTU,
49         .rx             = rx,
50         .build_header   = build_header,
51         .prepare_tx     = prepare_tx,
52         .continue_tx    = NULL,
53         .ack_tx         = NULL
54 };
55
56 static int __init arcnet_raw_init(void)
57 {
58         int count;
59
60         printk(VERSION);
61
62         for (count = 0; count < 256; count++)
63                 if (arc_proto_map[count] == arc_proto_default)
64                         arc_proto_map[count] = &rawmode_proto;
65
66         /* for raw mode, we only set the bcast proto if there's no better one */
67         if (arc_bcast_proto == arc_proto_default)
68                 arc_bcast_proto = &rawmode_proto;
69
70         arc_proto_default = &rawmode_proto;
71         return 0;
72 }
73
74 static void __exit arcnet_raw_exit(void)
75 {
76         arcnet_unregister_proto(&rawmode_proto);
77 }
78
79 module_init(arcnet_raw_init);
80 module_exit(arcnet_raw_exit);
81
82 MODULE_LICENSE("GPL");
83
84 /* packet receiver */
85 static void rx(struct net_device *dev, int bufnum,
86                struct archdr *pkthdr, int length)
87 {
88         struct arcnet_local *lp = netdev_priv(dev);
89         struct sk_buff *skb;
90         struct archdr *pkt = pkthdr;
91         int ofs;
92
93         BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
94
95         if (length > MTU)
96                 ofs = 512 - length;
97         else
98                 ofs = 256 - length;
99
100         skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
101         if (skb == NULL) {
102                 BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
103                 dev->stats.rx_dropped++;
104                 return;
105         }
106         skb_put(skb, length + ARC_HDR_SIZE);
107         skb->dev = dev;
108
109         pkt = (struct archdr *)skb->data;
110
111         skb_reset_mac_header(skb);
112         skb_pull(skb, ARC_HDR_SIZE);
113
114         /* up to sizeof(pkt->soft) has already been copied from the card */
115         memcpy(pkt, pkthdr, sizeof(struct archdr));
116         if (length > sizeof(pkt->soft))
117                 lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
118                                       pkt->soft.raw + sizeof(pkt->soft),
119                                       length - sizeof(pkt->soft));
120
121         BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
122
123         skb->protocol = cpu_to_be16(ETH_P_ARCNET);
124         netif_rx(skb);
125 }
126
127 /*
128  * Create the ARCnet hard/soft headers for raw mode.
129  * There aren't any soft headers in raw mode - not even the protocol id.
130  */
131 static int build_header(struct sk_buff *skb, struct net_device *dev,
132                         unsigned short type, uint8_t daddr)
133 {
134         int hdr_size = ARC_HDR_SIZE;
135         struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
136
137         /*
138          * Set the source hardware address.
139          *
140          * This is pretty pointless for most purposes, but it can help in
141          * debugging.  ARCnet does not allow us to change the source address in
142          * the actual packet sent)
143          */
144         pkt->hard.source = *dev->dev_addr;
145
146         /* see linux/net/ethernet/eth.c to see where I got the following */
147
148         if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
149                 /*
150                  * FIXME: fill in the last byte of the dest ipaddr here to better
151                  * comply with RFC1051 in "noarp" mode.
152                  */
153                 pkt->hard.dest = 0;
154                 return hdr_size;
155         }
156         /* otherwise, just fill it in and go! */
157         pkt->hard.dest = daddr;
158
159         return hdr_size;        /* success */
160 }
161
162 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
163                       int bufnum)
164 {
165         struct arcnet_local *lp = netdev_priv(dev);
166         struct arc_hardware *hard = &pkt->hard;
167         int ofs;
168
169         BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
170                lp->next_tx, lp->cur_tx, bufnum);
171
172         length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
173
174         if (length > XMTU) {
175                 /* should never happen! other people already check for this. */
176                 BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
177                        length, XMTU);
178                 length = XMTU;
179         }
180         if (length >= MinTU) {
181                 hard->offset[0] = 0;
182                 hard->offset[1] = ofs = 512 - length;
183         } else if (length > MTU) {
184                 hard->offset[0] = 0;
185                 hard->offset[1] = ofs = 512 - length - 3;
186         } else
187                 hard->offset[0] = ofs = 256 - length;
188
189         BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
190                length, ofs);
191
192         lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
193         lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
194
195         lp->lastload_dest = hard->dest;
196
197         return 1;               /* done */
198 }