1 /*******************************************************************************
3 * Intel 10 Gigabit PCI Express Linux driver
4 * Copyright(c) 1999 - 2015 Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * The full GNU General Public License is included in this distribution in
16 * the file called "COPYING".
18 * Contact Information:
19 * Linux NICS <linux.nics@intel.com>
20 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
21 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
23 ******************************************************************************/
24 #include "ixgbe_x540.h"
25 #include "ixgbe_type.h"
26 #include "ixgbe_common.h"
27 #include "ixgbe_phy.h"
29 static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw)
31 struct ixgbe_mac_info *mac = &hw->mac;
32 struct ixgbe_phy_info *phy = &hw->phy;
34 /* Start with X540 invariants, since so simular */
35 ixgbe_get_invariants_X540(hw);
37 if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
38 phy->ops.set_phy_power = NULL;
43 /** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
44 * @hw: pointer to hardware structure
46 static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
48 u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
51 esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
52 esdp |= IXGBE_ESDP_SDP1_DIR;
54 esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
55 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
56 IXGBE_WRITE_FLUSH(hw);
60 * ixgbe_read_cs4227 - Read CS4227 register
61 * @hw: pointer to hardware structure
62 * @reg: register number to write
63 * @value: pointer to receive value read
67 static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
69 return hw->phy.ops.read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg,
74 * ixgbe_write_cs4227 - Write CS4227 register
75 * @hw: pointer to hardware structure
76 * @reg: register number to write
77 * @value: value to write to register
81 static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
83 return hw->phy.ops.write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg,
88 * ixgbe_check_cs4227_reg - Perform diag on a CS4227 register
89 * @hw: pointer to hardware structure
90 * @reg: the register to check
92 * Performs a diagnostic on a register in the CS4227 chip. Returns an error
93 * if it is not operating correctly.
94 * This function assumes that the caller has acquired the proper semaphore.
96 static s32 ixgbe_check_cs4227_reg(struct ixgbe_hw *hw, u16 reg)
102 reg_val = (IXGBE_CS4227_EDC_MODE_DIAG << 1) | 1;
103 status = ixgbe_write_cs4227(hw, reg, reg_val);
106 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
107 msleep(IXGBE_CS4227_CHECK_DELAY);
109 ixgbe_read_cs4227(hw, reg, ®_val);
114 hw_err(hw, "CS4227 reg 0x%04X failed diagnostic\n", reg);
122 * ixgbe_get_cs4227_status - Return CS4227 status
123 * @hw: pointer to hardware structure
125 * Performs a diagnostic on the CS4227 chip. Returns an error if it is
126 * not operating correctly.
127 * This function assumes that the caller has acquired the proper semaphore.
129 static s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw)
134 /* Exit if the diagnostic has already been performed. */
135 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
138 if (value == IXGBE_CS4227_RESET_COMPLETE)
142 status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB);
146 status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB);
151 status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB +
156 return ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB +
161 * ixgbe_read_pe - Read register from port expander
162 * @hw: pointer to hardware structure
163 * @reg: register number to read
164 * @value: pointer to receive read value
166 * Returns status code
168 static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value)
172 status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value);
174 hw_err(hw, "port expander access failed with %d\n", status);
179 * ixgbe_write_pe - Write register to port expander
180 * @hw: pointer to hardware structure
181 * @reg: register number to write
182 * @value: value to write
184 * Returns status code
186 static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
190 status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE,
193 hw_err(hw, "port expander access failed with %d\n", status);
198 * ixgbe_reset_cs4227 - Reset CS4227 using port expander
199 * @hw: pointer to hardware structure
201 * This function assumes that the caller has acquired the proper semaphore.
204 static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
211 /* Trigger hard reset. */
212 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
215 reg |= IXGBE_PE_BIT1;
216 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
220 status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®);
223 reg &= ~IXGBE_PE_BIT1;
224 status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg);
228 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
231 reg &= ~IXGBE_PE_BIT1;
232 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
236 usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100);
238 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
241 reg |= IXGBE_PE_BIT1;
242 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
246 /* Wait for the reset to complete. */
247 msleep(IXGBE_CS4227_RESET_DELAY);
248 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
249 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS,
251 if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK)
253 msleep(IXGBE_CS4227_CHECK_DELAY);
255 if (retry == IXGBE_CS4227_RETRIES) {
256 hw_err(hw, "CS4227 reset did not complete\n");
257 return IXGBE_ERR_PHY;
260 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value);
261 if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) {
262 hw_err(hw, "CS4227 EEPROM did not load successfully\n");
263 return IXGBE_ERR_PHY;
270 * ixgbe_check_cs4227 - Check CS4227 and reset as needed
271 * @hw: pointer to hardware structure
273 static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
275 u32 swfw_mask = hw->phy.phy_semaphore_mask;
280 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
281 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
283 hw_err(hw, "semaphore failed with %d\n", status);
284 msleep(IXGBE_CS4227_CHECK_DELAY);
288 /* Get status of reset flow. */
289 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
290 if (!status && value == IXGBE_CS4227_RESET_COMPLETE)
293 if (status || value != IXGBE_CS4227_RESET_PENDING)
296 /* Reset is pending. Wait and check again. */
297 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
298 msleep(IXGBE_CS4227_CHECK_DELAY);
300 /* If still pending, assume other instance failed. */
301 if (retry == IXGBE_CS4227_RETRIES) {
302 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
304 hw_err(hw, "semaphore failed with %d\n", status);
309 /* Reset the CS4227. */
310 status = ixgbe_reset_cs4227(hw);
312 hw_err(hw, "CS4227 reset failed: %d", status);
316 /* Reset takes so long, temporarily release semaphore in case the
317 * other driver instance is waiting for the reset indication.
319 ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
320 IXGBE_CS4227_RESET_PENDING);
321 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
322 usleep_range(10000, 12000);
323 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
325 hw_err(hw, "semaphore failed with %d", status);
329 /* Is the CS4227 working correctly? */
330 status = ixgbe_get_cs4227_status(hw);
332 hw_err(hw, "CS4227 status failed: %d", status);
336 /* Record completion for next time. */
337 status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
338 IXGBE_CS4227_RESET_COMPLETE);
341 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
342 msleep(hw->eeprom.semaphore_delay);
345 /** ixgbe_identify_phy_x550em - Get PHY type based on device id
346 * @hw: pointer to hardware structure
350 static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
352 switch (hw->device_id) {
353 case IXGBE_DEV_ID_X550EM_X_SFP:
354 /* set up for CS4227 usage */
355 hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
356 ixgbe_setup_mux_ctl(hw);
357 ixgbe_check_cs4227(hw);
358 return ixgbe_identify_module_generic(hw);
359 case IXGBE_DEV_ID_X550EM_X_KX4:
360 hw->phy.type = ixgbe_phy_x550em_kx4;
362 case IXGBE_DEV_ID_X550EM_X_KR:
363 hw->phy.type = ixgbe_phy_x550em_kr;
365 case IXGBE_DEV_ID_X550EM_X_1G_T:
366 case IXGBE_DEV_ID_X550EM_X_10G_T:
367 return ixgbe_identify_phy_generic(hw);
374 static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
375 u32 device_type, u16 *phy_data)
377 return IXGBE_NOT_IMPLEMENTED;
380 static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
381 u32 device_type, u16 phy_data)
383 return IXGBE_NOT_IMPLEMENTED;
386 /** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
387 * @hw: pointer to hardware structure
389 * Initializes the EEPROM parameters ixgbe_eeprom_info within the
390 * ixgbe_hw struct in order to set up EEPROM access.
392 static s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
394 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
398 if (eeprom->type == ixgbe_eeprom_uninitialized) {
399 eeprom->semaphore_delay = 10;
400 eeprom->type = ixgbe_flash;
402 eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
403 eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
404 IXGBE_EEC_SIZE_SHIFT);
405 eeprom->word_size = 1 << (eeprom_size +
406 IXGBE_EEPROM_WORD_SIZE_SHIFT);
408 hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
409 eeprom->type, eeprom->word_size);
416 * ixgbe_iosf_wait - Wait for IOSF command completion
417 * @hw: pointer to hardware structure
418 * @ctrl: pointer to location to receive final IOSF control value
420 * Return: failing status on timeout
422 * Note: ctrl can be NULL if the IOSF control register value is not needed
424 static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
428 /* Check every 10 usec to see if the address cycle completed.
429 * The SB IOSF BUSY bit will clear when the operation is
432 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
433 command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
434 if (!(command & IXGBE_SB_IOSF_CTRL_BUSY))
436 usleep_range(10, 20);
440 if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
441 hw_dbg(hw, "IOSF wait timed out\n");
442 return IXGBE_ERR_PHY;
448 /** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the
450 * @hw: pointer to hardware structure
451 * @reg_addr: 32 bit PHY register to write
452 * @device_type: 3 bit device type
453 * @phy_data: Pointer to read data from the register
455 static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
456 u32 device_type, u32 *data)
458 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
462 ret = hw->mac.ops.acquire_swfw_sync(hw, gssr);
466 ret = ixgbe_iosf_wait(hw, NULL);
470 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
471 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
473 /* Write IOSF control register */
474 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
476 ret = ixgbe_iosf_wait(hw, &command);
478 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
479 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
480 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
481 hw_dbg(hw, "Failed to read, error %x\n", error);
482 return IXGBE_ERR_PHY;
486 *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
489 hw->mac.ops.release_swfw_sync(hw, gssr);
493 /** ixgbe_read_ee_hostif_data_X550 - Read EEPROM word using a host interface
494 * command assuming that the semaphore is already obtained.
495 * @hw: pointer to hardware structure
496 * @offset: offset of word in the EEPROM to read
497 * @data: word read from the EEPROM
499 * Reads a 16 bit word from the EEPROM using the hostif.
501 static s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
505 struct ixgbe_hic_read_shadow_ram buffer;
507 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
508 buffer.hdr.req.buf_lenh = 0;
509 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
510 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
512 /* convert offset from words to bytes */
513 buffer.address = cpu_to_be32(offset * 2);
515 buffer.length = cpu_to_be16(sizeof(u16));
517 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
519 IXGBE_HI_COMMAND_TIMEOUT, false);
523 *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
529 /** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
530 * @hw: pointer to hardware structure
531 * @offset: offset of word in the EEPROM to read
532 * @words: number of words
533 * @data: word(s) read from the EEPROM
535 * Reads a 16 bit word(s) from the EEPROM using the hostif.
537 static s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
538 u16 offset, u16 words, u16 *data)
540 struct ixgbe_hic_read_shadow_ram buffer;
541 u32 current_word = 0;
546 /* Take semaphore for the entire operation. */
547 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
549 hw_dbg(hw, "EEPROM read buffer - semaphore failed\n");
554 if (words > FW_MAX_READ_BUFFER_SIZE / 2)
555 words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
557 words_to_read = words;
559 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
560 buffer.hdr.req.buf_lenh = 0;
561 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
562 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
564 /* convert offset from words to bytes */
565 buffer.address = cpu_to_be32((offset + current_word) * 2);
566 buffer.length = cpu_to_be16(words_to_read * 2);
568 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
570 IXGBE_HI_COMMAND_TIMEOUT,
573 hw_dbg(hw, "Host interface command failed\n");
577 for (i = 0; i < words_to_read; i++) {
578 u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
580 u32 value = IXGBE_READ_REG(hw, reg);
582 data[current_word] = (u16)(value & 0xffff);
585 if (i < words_to_read) {
587 data[current_word] = (u16)(value & 0xffff);
591 words -= words_to_read;
595 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
599 /** ixgbe_checksum_ptr_x550 - Checksum one pointer region
600 * @hw: pointer to hardware structure
601 * @ptr: pointer offset in eeprom
602 * @size: size of section pointed by ptr, if 0 first word will be used as size
603 * @csum: address of checksum to update
605 * Returns error status for any failure
607 static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
608 u16 size, u16 *csum, u16 *buffer,
613 u16 length, bufsz, i, start;
616 bufsz = sizeof(buf) / sizeof(buf[0]);
618 /* Read a chunk at the pointer location */
620 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
622 hw_dbg(hw, "Failed to read EEPROM image\n");
627 if (buffer_size < ptr)
628 return IXGBE_ERR_PARAM;
629 local_buffer = &buffer[ptr];
637 length = local_buffer[0];
639 /* Skip pointer section if length is invalid. */
640 if (length == 0xFFFF || length == 0 ||
641 (ptr + length) >= hw->eeprom.word_size)
645 if (buffer && ((u32)start + (u32)length > buffer_size))
646 return IXGBE_ERR_PARAM;
648 for (i = start; length; i++, length--) {
649 if (i == bufsz && !buffer) {
655 /* Read a chunk at the pointer location */
656 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
659 hw_dbg(hw, "Failed to read EEPROM image\n");
663 *csum += local_buffer[i];
668 /** ixgbe_calc_checksum_X550 - Calculates and returns the checksum
669 * @hw: pointer to hardware structure
670 * @buffer: pointer to buffer containing calculated checksum
671 * @buffer_size: size of buffer
673 * Returns a negative error code on error, or the 16-bit checksum
675 static s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer,
678 u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
682 u16 pointer, i, size;
684 hw->eeprom.ops.init_params(hw);
687 /* Read pointer area */
688 status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
689 IXGBE_EEPROM_LAST_WORD + 1,
692 hw_dbg(hw, "Failed to read EEPROM image\n");
695 local_buffer = eeprom_ptrs;
697 if (buffer_size < IXGBE_EEPROM_LAST_WORD)
698 return IXGBE_ERR_PARAM;
699 local_buffer = buffer;
702 /* For X550 hardware include 0x0-0x41 in the checksum, skip the
703 * checksum word itself
705 for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
706 if (i != IXGBE_EEPROM_CHECKSUM)
707 checksum += local_buffer[i];
709 /* Include all data from pointers 0x3, 0x6-0xE. This excludes the
710 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
712 for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
713 if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
716 pointer = local_buffer[i];
718 /* Skip pointer section if the pointer is invalid. */
719 if (pointer == 0xFFFF || pointer == 0 ||
720 pointer >= hw->eeprom.word_size)
724 case IXGBE_PCIE_GENERAL_PTR:
725 size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
727 case IXGBE_PCIE_CONFIG0_PTR:
728 case IXGBE_PCIE_CONFIG1_PTR:
729 size = IXGBE_PCIE_CONFIG_SIZE;
736 status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
737 buffer, buffer_size);
742 checksum = (u16)IXGBE_EEPROM_SUM - checksum;
744 return (s32)checksum;
747 /** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
748 * @hw: pointer to hardware structure
750 * Returns a negative error code on error, or the 16-bit checksum
752 static s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
754 return ixgbe_calc_checksum_X550(hw, NULL, 0);
757 /** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
758 * @hw: pointer to hardware structure
759 * @offset: offset of word in the EEPROM to read
760 * @data: word read from the EEPROM
762 * Reads a 16 bit word from the EEPROM using the hostif.
764 static s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
768 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
769 status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
770 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
772 status = IXGBE_ERR_SWFW_SYNC;
778 /** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
779 * @hw: pointer to hardware structure
780 * @checksum_val: calculated checksum
782 * Performs checksum calculation and validates the EEPROM checksum. If the
783 * caller does not need checksum_val, the value can be NULL.
785 static s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw,
790 u16 read_checksum = 0;
792 /* Read the first word from the EEPROM. If this times out or fails, do
793 * not continue or we could be in for a very long wait while every
796 status = hw->eeprom.ops.read(hw, 0, &checksum);
798 hw_dbg(hw, "EEPROM read failed\n");
802 status = hw->eeprom.ops.calc_checksum(hw);
806 checksum = (u16)(status & 0xffff);
808 status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
813 /* Verify read checksum from EEPROM is the same as
814 * calculated checksum
816 if (read_checksum != checksum) {
817 status = IXGBE_ERR_EEPROM_CHECKSUM;
818 hw_dbg(hw, "Invalid EEPROM checksum");
821 /* If the user cares, return the calculated checksum */
823 *checksum_val = checksum;
828 /** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
829 * @hw: pointer to hardware structure
830 * @offset: offset of word in the EEPROM to write
831 * @data: word write to the EEPROM
833 * Write a 16 bit word to the EEPROM using the hostif.
835 static s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
839 struct ixgbe_hic_write_shadow_ram buffer;
841 buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
842 buffer.hdr.req.buf_lenh = 0;
843 buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
844 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
847 buffer.length = cpu_to_be16(sizeof(u16));
849 buffer.address = cpu_to_be32(offset * 2);
851 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
853 IXGBE_HI_COMMAND_TIMEOUT, false);
857 /** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
858 * @hw: pointer to hardware structure
859 * @offset: offset of word in the EEPROM to write
860 * @data: word write to the EEPROM
862 * Write a 16 bit word to the EEPROM using the hostif.
864 static s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
868 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
869 status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
870 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
872 hw_dbg(hw, "write ee hostif failed to get semaphore");
873 status = IXGBE_ERR_SWFW_SYNC;
879 /** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
880 * @hw: pointer to hardware structure
882 * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
884 static s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
887 union ixgbe_hic_hdr2 buffer;
889 buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
890 buffer.req.buf_lenh = 0;
891 buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
892 buffer.req.checksum = FW_DEFAULT_CHECKSUM;
894 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
896 IXGBE_HI_COMMAND_TIMEOUT, false);
901 * ixgbe_get_bus_info_X550em - Set PCI bus info
902 * @hw: pointer to hardware structure
904 * Sets bus link width and speed to unknown because X550em is
907 static s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
909 hw->bus.type = ixgbe_bus_type_internal;
910 hw->bus.width = ixgbe_bus_width_unknown;
911 hw->bus.speed = ixgbe_bus_speed_unknown;
913 hw->mac.ops.set_lan_id(hw);
918 /** ixgbe_disable_rx_x550 - Disable RX unit
920 * Enables the Rx DMA unit for x550
922 static void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
924 u32 rxctrl, pfdtxgswc;
926 struct ixgbe_hic_disable_rxen fw_cmd;
928 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
929 if (rxctrl & IXGBE_RXCTRL_RXEN) {
930 pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
931 if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
932 pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
933 IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
934 hw->mac.set_lben = true;
936 hw->mac.set_lben = false;
939 fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
940 fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
941 fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
942 fw_cmd.port_number = (u8)hw->bus.lan_id;
944 status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
945 sizeof(struct ixgbe_hic_disable_rxen),
946 IXGBE_HI_COMMAND_TIMEOUT, true);
948 /* If we fail - disable RX using register write */
950 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
951 if (rxctrl & IXGBE_RXCTRL_RXEN) {
952 rxctrl &= ~IXGBE_RXCTRL_RXEN;
953 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
959 /** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
960 * @hw: pointer to hardware structure
962 * After writing EEPROM to shadow RAM using EEWR register, software calculates
963 * checksum and updates the EEPROM and instructs the hardware to update
966 static s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
971 /* Read the first word from the EEPROM. If this times out or fails, do
972 * not continue or we could be in for a very long wait while every
975 status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
977 hw_dbg(hw, "EEPROM read failed\n");
981 status = ixgbe_calc_eeprom_checksum_X550(hw);
985 checksum = (u16)(status & 0xffff);
987 status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
992 status = ixgbe_update_flash_X550(hw);
997 /** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
998 * @hw: pointer to hardware structure
999 * @offset: offset of word in the EEPROM to write
1000 * @words: number of words
1001 * @data: word(s) write to the EEPROM
1004 * Write a 16 bit word(s) to the EEPROM using the hostif.
1006 static s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
1007 u16 offset, u16 words,
1013 /* Take semaphore for the entire operation. */
1014 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
1016 hw_dbg(hw, "EEPROM write buffer - semaphore failed\n");
1020 for (i = 0; i < words; i++) {
1021 status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
1024 hw_dbg(hw, "Eeprom buffered write failed\n");
1029 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
1034 /** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the
1037 * @hw: pointer to hardware structure
1038 * @reg_addr: 32 bit PHY register to write
1039 * @device_type: 3 bit device type
1040 * @data: Data to write to the register
1042 static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
1043 u32 device_type, u32 data)
1045 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
1049 ret = hw->mac.ops.acquire_swfw_sync(hw, gssr);
1053 ret = ixgbe_iosf_wait(hw, NULL);
1057 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
1058 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
1060 /* Write IOSF control register */
1061 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
1063 /* Write IOSF data register */
1064 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
1066 ret = ixgbe_iosf_wait(hw, &command);
1068 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
1069 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
1070 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
1071 hw_dbg(hw, "Failed to write, error %x\n", error);
1072 return IXGBE_ERR_PHY;
1076 hw->mac.ops.release_swfw_sync(hw, gssr);
1080 /** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
1081 * @hw: pointer to hardware structure
1082 * @speed: the link speed to force
1084 * Configures the integrated KR PHY to use iXFI mode. Used to connect an
1085 * internal and external PHY at a specific speed, without autonegotiation.
1087 static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
1092 /* Disable AN and force speed to 10G Serial. */
1093 status = ixgbe_read_iosf_sb_reg_x550(hw,
1094 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1095 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1099 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1100 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
1102 /* Select forced link speed for internal PHY. */
1104 case IXGBE_LINK_SPEED_10GB_FULL:
1105 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
1107 case IXGBE_LINK_SPEED_1GB_FULL:
1108 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
1111 /* Other link speeds are not supported by internal KR PHY. */
1112 return IXGBE_ERR_LINK_SETUP;
1115 status = ixgbe_write_iosf_sb_reg_x550(hw,
1116 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1117 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1121 /* Disable training protocol FSM. */
1122 status = ixgbe_read_iosf_sb_reg_x550(hw,
1123 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1124 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1128 reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
1129 status = ixgbe_write_iosf_sb_reg_x550(hw,
1130 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1131 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1135 /* Disable Flex from training TXFFE. */
1136 status = ixgbe_read_iosf_sb_reg_x550(hw,
1137 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1138 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1142 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1143 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1144 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1145 status = ixgbe_write_iosf_sb_reg_x550(hw,
1146 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1147 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1151 status = ixgbe_read_iosf_sb_reg_x550(hw,
1152 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1153 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1157 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1158 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1159 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1160 status = ixgbe_write_iosf_sb_reg_x550(hw,
1161 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1162 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1166 /* Enable override for coefficients. */
1167 status = ixgbe_read_iosf_sb_reg_x550(hw,
1168 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1169 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1173 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
1174 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
1175 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
1176 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
1177 status = ixgbe_write_iosf_sb_reg_x550(hw,
1178 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1179 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1183 /* Toggle port SW reset by AN reset. */
1184 status = ixgbe_read_iosf_sb_reg_x550(hw,
1185 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1186 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1190 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
1191 status = ixgbe_write_iosf_sb_reg_x550(hw,
1192 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1193 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1199 * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
1200 * @hw: pointer to hardware structure
1201 * @linear: true if SFP module is linear
1203 static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
1205 switch (hw->phy.sfp_type) {
1206 case ixgbe_sfp_type_not_present:
1207 return IXGBE_ERR_SFP_NOT_PRESENT;
1208 case ixgbe_sfp_type_da_cu_core0:
1209 case ixgbe_sfp_type_da_cu_core1:
1212 case ixgbe_sfp_type_srlr_core0:
1213 case ixgbe_sfp_type_srlr_core1:
1214 case ixgbe_sfp_type_da_act_lmt_core0:
1215 case ixgbe_sfp_type_da_act_lmt_core1:
1216 case ixgbe_sfp_type_1g_sx_core0:
1217 case ixgbe_sfp_type_1g_sx_core1:
1218 case ixgbe_sfp_type_1g_lx_core0:
1219 case ixgbe_sfp_type_1g_lx_core1:
1222 case ixgbe_sfp_type_unknown:
1223 case ixgbe_sfp_type_1g_cu_core0:
1224 case ixgbe_sfp_type_1g_cu_core1:
1226 return IXGBE_ERR_SFP_NOT_SUPPORTED;
1233 * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP.
1234 * @hw: pointer to hardware structure
1236 * Configures the extern PHY and the integrated KR PHY for SFP support.
1239 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
1240 ixgbe_link_speed speed,
1241 __always_unused bool autoneg_wait_to_complete)
1245 bool setup_linear = false;
1247 /* Check if SFP module is supported and linear */
1248 status = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
1250 /* If no SFP module present, then return success. Return success since
1251 * there is no reason to configure CS4227 and SFP not present error is
1252 * not accepted in the setup MAC link flow.
1254 if (status == IXGBE_ERR_SFP_NOT_PRESENT)
1260 /* Configure CS4227 LINE side to 10G SR. */
1261 slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
1262 value = IXGBE_CS4227_SPEED_10G;
1263 status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
1266 /* Configure CS4227 for HOST connection rate then type. */
1267 slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
1268 value = speed & IXGBE_LINK_SPEED_10GB_FULL ?
1269 IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
1270 status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
1273 slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
1275 value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
1277 value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
1278 status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
1281 /* If internal link mode is XFI, then setup XFI internal link. */
1282 if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))
1283 status = ixgbe_setup_ixfi_x550em(hw, &speed);
1289 * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
1290 * @hw: pointer to hardware structure
1291 * @speed: new link speed
1292 * @autoneg_wait_to_complete: true when waiting for completion is needed
1294 * Setup internal/external PHY link speed based on link speed, then set
1295 * external PHY auto advertised link speed.
1297 * Returns error status for any failure
1299 static s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
1300 ixgbe_link_speed speed,
1304 ixgbe_link_speed force_speed;
1306 /* Setup internal/external PHY link speed to iXFI (10G), unless
1307 * only 1G is auto advertised then setup KX link.
1309 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
1310 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
1312 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
1314 /* If internal link mode is XFI, then setup XFI internal link. */
1315 if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
1316 status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
1322 return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
1325 /** ixgbe_check_link_t_X550em - Determine link and speed status
1326 * @hw: pointer to hardware structure
1327 * @speed: pointer to link speed
1328 * @link_up: true when link is up
1329 * @link_up_wait_to_complete: bool used to wait for link up or not
1331 * Check that both the MAC and X557 external PHY have link.
1333 static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
1334 ixgbe_link_speed *speed,
1336 bool link_up_wait_to_complete)
1341 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
1342 return IXGBE_ERR_CONFIG;
1344 status = ixgbe_check_mac_link_generic(hw, speed, link_up,
1345 link_up_wait_to_complete);
1347 /* If check link fails or MAC link is not up, then return */
1348 if (status || !(*link_up))
1351 /* MAC link is up, so check external PHY link.
1352 * Read this twice back to back to indicate current status.
1354 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
1355 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1360 /* If external PHY link is not up, then indicate link not up */
1361 if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
1367 /** ixgbe_init_mac_link_ops_X550em - init mac link function pointers
1368 * @hw: pointer to hardware structure
1370 static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
1372 struct ixgbe_mac_info *mac = &hw->mac;
1374 switch (mac->ops.get_media_type(hw)) {
1375 case ixgbe_media_type_fiber:
1376 /* CS4227 does not support autoneg, so disable the laser control
1377 * functions for SFP+ fiber
1379 mac->ops.disable_tx_laser = NULL;
1380 mac->ops.enable_tx_laser = NULL;
1381 mac->ops.flap_tx_laser = NULL;
1382 mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
1383 mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
1384 mac->ops.set_rate_select_speed =
1385 ixgbe_set_soft_rate_select_speed;
1387 case ixgbe_media_type_copper:
1388 mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
1389 mac->ops.check_link = ixgbe_check_link_t_X550em;
1396 /** ixgbe_setup_sfp_modules_X550em - Setup SFP module
1397 * @hw: pointer to hardware structure
1399 static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
1404 /* Check if SFP module is supported */
1405 status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
1409 ixgbe_init_mac_link_ops_X550em(hw);
1410 hw->phy.ops.reset = NULL;
1415 /** ixgbe_get_link_capabilities_x550em - Determines link capabilities
1416 * @hw: pointer to hardware structure
1417 * @speed: pointer to link speed
1418 * @autoneg: true when autoneg or autotry is enabled
1420 static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
1421 ixgbe_link_speed *speed,
1425 if (hw->phy.media_type == ixgbe_media_type_fiber) {
1426 /* CS4227 SFP must not enable auto-negotiation */
1429 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
1430 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
1431 *speed = IXGBE_LINK_SPEED_1GB_FULL;
1435 /* Link capabilities are based on SFP */
1436 if (hw->phy.multispeed_fiber)
1437 *speed = IXGBE_LINK_SPEED_10GB_FULL |
1438 IXGBE_LINK_SPEED_1GB_FULL;
1440 *speed = IXGBE_LINK_SPEED_10GB_FULL;
1442 *speed = IXGBE_LINK_SPEED_10GB_FULL |
1443 IXGBE_LINK_SPEED_1GB_FULL;
1450 * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
1451 * @hw: pointer to hardware structure
1452 * @lsc: pointer to boolean flag which indicates whether external Base T
1453 * PHY interrupt is lsc
1455 * Determime if external Base T PHY interrupt cause is high temperature
1456 * failure alarm or link status change.
1458 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
1459 * failure alarm, else return PHY access status.
1461 static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
1468 /* Vendor alarm triggered */
1469 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
1470 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1473 if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
1476 /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
1477 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
1478 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1481 if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
1482 IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
1485 /* High temperature failure alarm triggered */
1486 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
1487 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1493 /* If high temperature failure, then return over temp error and exit */
1494 if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
1495 /* power down the PHY in case the PHY FW didn't already */
1496 ixgbe_set_copper_phy_power(hw, false);
1497 return IXGBE_ERR_OVERTEMP;
1500 /* Vendor alarm 2 triggered */
1501 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
1502 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1504 if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
1507 /* link connect/disconnect event occurred */
1508 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
1509 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1515 if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC)
1522 * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
1523 * @hw: pointer to hardware structure
1525 * Enable link status change and temperature failure alarm for the external
1528 * Returns PHY access status
1530 static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
1536 /* Clear interrupt flags */
1537 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
1539 /* Enable link status change alarm */
1540 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
1541 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1545 reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
1547 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
1548 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
1552 /* Enables high temperature failure alarm */
1553 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
1554 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1559 reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN;
1561 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
1562 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1567 /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
1568 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
1569 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1574 reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
1575 IXGBE_MDIO_GLOBAL_ALARM_1_INT);
1577 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
1578 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1583 /* Enable chip-wide vendor alarm */
1584 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
1585 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1590 reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
1592 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
1593 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1600 * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
1601 * @hw: pointer to hardware structure
1603 * Handle external Base T PHY interrupt. If high temperature
1604 * failure alarm then return error, else if link status change
1605 * then setup internal/external PHY link
1607 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
1608 * failure alarm, else return PHY access status.
1610 static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
1612 struct ixgbe_phy_info *phy = &hw->phy;
1616 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
1620 if (lsc && phy->ops.setup_internal_link)
1621 return phy->ops.setup_internal_link(hw);
1627 * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
1628 * @hw: pointer to hardware structure
1629 * @speed: link speed
1631 * Configures the integrated KR PHY.
1633 static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
1634 ixgbe_link_speed speed)
1639 status = ixgbe_read_iosf_sb_reg_x550(hw,
1640 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1641 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1645 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1646 reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ |
1647 IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC);
1648 reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
1649 IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
1651 /* Advertise 10G support. */
1652 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
1653 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
1655 /* Advertise 1G support. */
1656 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
1657 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
1659 /* Restart auto-negotiation. */
1660 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
1661 status = ixgbe_write_iosf_sb_reg_x550(hw,
1662 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1663 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1668 /** ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
1669 * @hw: pointer to hardware structure
1671 * Configures the integrated KX4 PHY.
1673 static s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
1678 status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
1679 IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
1680 hw->bus.lan_id, ®_val);
1684 reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
1685 IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
1687 reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
1689 /* Advertise 10G support. */
1690 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
1691 reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
1693 /* Advertise 1G support. */
1694 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
1695 reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
1697 /* Restart auto-negotiation. */
1698 reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
1699 status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
1700 IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
1701 hw->bus.lan_id, reg_val);
1706 /** ixgbe_setup_kr_x550em - Configure the KR PHY.
1707 * @hw: pointer to hardware structure
1709 * Configures the integrated KR PHY.
1711 static s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
1713 return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
1716 /** ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
1717 * @hw: address of hardware structure
1718 * @link_up: address of boolean to indicate link status
1720 * Returns error code if unable to get link status.
1722 static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
1729 /* read this twice back to back to indicate current status */
1730 ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
1731 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1736 ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
1737 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1742 *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS);
1747 /** ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
1748 * @hw: point to hardware structure
1750 * Configures the link between the integrated KR PHY and the external X557 PHY
1751 * The driver will call this function when it gets a link status change
1752 * interrupt from the X557 PHY. This function configures the link speed
1753 * between the PHYs to match the link speed of the BASE-T link.
1755 * A return of a non-zero value indicates an error, and the base driver should
1756 * not report link up.
1758 static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
1760 ixgbe_link_speed force_speed;
1765 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
1766 return IXGBE_ERR_CONFIG;
1768 /* If link is not up, then there is no setup necessary so return */
1769 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1776 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
1777 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1782 /* If link is not still up, then no setup is necessary so return */
1783 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1790 /* clear everything but the speed and duplex bits */
1791 speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
1794 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
1795 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
1797 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
1798 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
1801 /* Internal PHY does not support anything else */
1802 return IXGBE_ERR_INVALID_LINK_SETTINGS;
1805 return ixgbe_setup_ixfi_x550em(hw, &force_speed);
1808 /** ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
1809 * @hw: pointer to hardware structure
1811 static s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
1815 status = ixgbe_reset_phy_generic(hw);
1820 /* Configure Link Status Alarm and Temperature Threshold interrupts */
1821 return ixgbe_enable_lasi_ext_t_x550em(hw);
1824 /** ixgbe_get_lcd_x550em - Determine lowest common denominator
1825 * @hw: pointer to hardware structure
1826 * @lcd_speed: pointer to lowest common link speed
1828 * Determine lowest common link speed with link partner.
1830 static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw,
1831 ixgbe_link_speed *lcd_speed)
1835 u16 word = hw->eeprom.ctrl_word_3;
1837 *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
1839 status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
1840 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1845 /* If link partner advertised 1G, return 1G */
1846 if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) {
1847 *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL;
1851 /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
1852 if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) ||
1853 (word & NVM_INIT_CTRL_3_D10GMP_PORT0))
1856 /* Link partner not capable of lower speeds, return 10G */
1857 *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL;
1861 /** ixgbe_enter_lplu_x550em - Transition to low power states
1862 * @hw: pointer to hardware structure
1864 * Configures Low Power Link Up on transition to low power states
1865 * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting
1866 * the X557 PHY immediately prior to entering LPLU.
1868 static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
1870 u16 an_10g_cntl_reg, autoneg_reg, speed;
1872 ixgbe_link_speed lcd_speed;
1876 /* SW LPLU not required on later HW revisions. */
1877 if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))
1880 /* If blocked by MNG FW, then don't restart AN */
1881 if (ixgbe_check_reset_blocked(hw))
1884 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1888 status = hw->eeprom.ops.read(hw, NVM_INIT_CTRL_3,
1889 &hw->eeprom.ctrl_word_3);
1893 /* If link is down, LPLU disabled in NVM, WoL disabled, or
1894 * manageability disabled, then force link down by entering
1897 if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) ||
1898 !(hw->wol_enabled || ixgbe_mng_present(hw)))
1899 return ixgbe_set_copper_phy_power(hw, false);
1902 status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
1906 /* If no valid LCD link speed, then force link down and exit. */
1907 if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN)
1908 return ixgbe_set_copper_phy_power(hw, false);
1910 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
1911 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1916 /* If no link now, speed is invalid so take link down */
1917 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1919 return ixgbe_set_copper_phy_power(hw, false);
1921 /* clear everything but the speed bits */
1922 speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK;
1924 /* If current speed is already LCD, then exit. */
1925 if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) &&
1926 (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) ||
1927 ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) &&
1928 (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL)))
1931 /* Clear AN completed indication */
1932 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
1933 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1938 status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
1939 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1944 status = hw->phy.ops.read_reg(hw,
1945 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
1946 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1951 save_autoneg = hw->phy.autoneg_advertised;
1953 /* Setup link at least common link speed */
1954 status = hw->mac.ops.setup_link(hw, lcd_speed, false);
1956 /* restore autoneg from before setting lplu speed */
1957 hw->phy.autoneg_advertised = save_autoneg;
1962 /** ixgbe_init_phy_ops_X550em - PHY/SFP specific init
1963 * @hw: pointer to hardware structure
1965 * Initialize any function pointers that were not able to be
1966 * set during init_shared_code because the PHY/SFP type was
1967 * not known. Perform the SFP init if necessary.
1969 static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
1971 struct ixgbe_phy_info *phy = &hw->phy;
1972 ixgbe_link_speed speed;
1975 hw->mac.ops.set_lan_id(hw);
1977 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
1978 phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
1979 ixgbe_setup_mux_ctl(hw);
1981 /* Save NW management interface connected on board. This is used
1982 * to determine internal PHY mode.
1984 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
1986 /* If internal PHY mode is KR, then initialize KR link */
1987 if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
1988 speed = IXGBE_LINK_SPEED_10GB_FULL |
1989 IXGBE_LINK_SPEED_1GB_FULL;
1990 ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
1994 /* Identify the PHY or SFP module */
1995 ret_val = phy->ops.identify(hw);
1997 /* Setup function pointers based on detected hardware */
1998 ixgbe_init_mac_link_ops_X550em(hw);
1999 if (phy->sfp_type != ixgbe_sfp_type_unknown)
2000 phy->ops.reset = NULL;
2002 /* Set functions pointers based on phy type */
2003 switch (hw->phy.type) {
2004 case ixgbe_phy_x550em_kx4:
2005 phy->ops.setup_link = ixgbe_setup_kx4_x550em;
2006 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
2007 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
2009 case ixgbe_phy_x550em_kr:
2010 phy->ops.setup_link = ixgbe_setup_kr_x550em;
2011 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
2012 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
2014 case ixgbe_phy_x550em_ext_t:
2015 /* Save NW management interface connected on board. This is used
2016 * to determine internal PHY mode
2018 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
2020 /* If internal link mode is XFI, then setup iXFI internal link,
2021 * else setup KR now.
2023 if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
2024 phy->ops.setup_internal_link =
2025 ixgbe_setup_internal_phy_t_x550em;
2027 speed = IXGBE_LINK_SPEED_10GB_FULL |
2028 IXGBE_LINK_SPEED_1GB_FULL;
2029 ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
2032 /* setup SW LPLU only for first revision */
2033 if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
2034 IXGBE_FUSES0_GROUP(0))))
2035 phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
2037 phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
2038 phy->ops.reset = ixgbe_reset_phy_t_X550em;
2047 /** ixgbe_get_media_type_X550em - Get media type
2048 * @hw: pointer to hardware structure
2050 * Returns the media type (fiber, copper, backplane)
2053 static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
2055 enum ixgbe_media_type media_type;
2057 /* Detect if there is a copper PHY attached. */
2058 switch (hw->device_id) {
2059 case IXGBE_DEV_ID_X550EM_X_KR:
2060 case IXGBE_DEV_ID_X550EM_X_KX4:
2061 media_type = ixgbe_media_type_backplane;
2063 case IXGBE_DEV_ID_X550EM_X_SFP:
2064 media_type = ixgbe_media_type_fiber;
2066 case IXGBE_DEV_ID_X550EM_X_1G_T:
2067 case IXGBE_DEV_ID_X550EM_X_10G_T:
2068 media_type = ixgbe_media_type_copper;
2071 media_type = ixgbe_media_type_unknown;
2077 /** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
2078 ** @hw: pointer to hardware structure
2080 static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
2085 status = hw->phy.ops.read_reg(hw,
2086 IXGBE_MDIO_TX_VENDOR_ALARMS_3,
2087 IXGBE_MDIO_PMA_PMD_DEV_TYPE,
2092 /* If PHY FW reset completed bit is set then this is the first
2093 * SW instance after a power on so the PHY FW must be un-stalled.
2095 if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
2096 status = hw->phy.ops.read_reg(hw,
2097 IXGBE_MDIO_GLOBAL_RES_PR_10,
2098 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
2103 reg &= ~IXGBE_MDIO_POWER_UP_STALL;
2105 status = hw->phy.ops.write_reg(hw,
2106 IXGBE_MDIO_GLOBAL_RES_PR_10,
2107 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
2116 /** ixgbe_reset_hw_X550em - Perform hardware reset
2117 ** @hw: pointer to hardware structure
2119 ** Resets the hardware by resetting the transmit and receive units, masks
2120 ** and clears all interrupts, perform a PHY reset, and perform a link (MAC)
2123 static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
2125 ixgbe_link_speed link_speed;
2130 bool link_up = false;
2132 /* Call adapter stop to disable Tx/Rx and clear interrupts */
2133 status = hw->mac.ops.stop_adapter(hw);
2137 /* flush pending Tx transactions */
2138 ixgbe_clear_tx_pending(hw);
2140 /* PHY ops must be identified and initialized prior to reset */
2142 /* Identify PHY and related function pointers */
2143 status = hw->phy.ops.init(hw);
2145 /* start the external PHY */
2146 if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
2147 status = ixgbe_init_ext_t_x550em(hw);
2152 /* Setup SFP module if there is one present. */
2153 if (hw->phy.sfp_setup_needed) {
2154 status = hw->mac.ops.setup_sfp(hw);
2155 hw->phy.sfp_setup_needed = false;
2159 if (!hw->phy.reset_disable && hw->phy.ops.reset)
2160 hw->phy.ops.reset(hw);
2163 /* Issue global reset to the MAC. Needs to be SW reset if link is up.
2164 * If link reset is used when link is up, it might reset the PHY when
2165 * mng is using it. If link is down or the flag to force full link
2166 * reset is set, then perform link reset.
2168 ctrl = IXGBE_CTRL_LNK_RST;
2170 if (!hw->force_full_reset) {
2171 hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
2173 ctrl = IXGBE_CTRL_RST;
2176 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
2177 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
2178 IXGBE_WRITE_FLUSH(hw);
2180 /* Poll for reset bit to self-clear meaning reset is complete */
2181 for (i = 0; i < 10; i++) {
2183 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
2184 if (!(ctrl & IXGBE_CTRL_RST_MASK))
2188 if (ctrl & IXGBE_CTRL_RST_MASK) {
2189 status = IXGBE_ERR_RESET_FAILED;
2190 hw_dbg(hw, "Reset polling failed to complete.\n");
2195 /* Double resets are required for recovery from certain error
2196 * clear the multicast table. Also reset num_rar_entries to 128,
2197 * since we modify this value when programming the SAN MAC address.
2199 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
2200 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
2204 /* Store the permanent mac address */
2205 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
2207 /* Store MAC address from RAR0, clear receive address registers, and
2208 * clear the multicast table. Also reset num_rar_entries to 128,
2209 * since we modify this value when programming the SAN MAC address.
2211 hw->mac.num_rar_entries = 128;
2212 hw->mac.ops.init_rx_addrs(hw);
2214 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
2215 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
2216 hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
2217 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
2220 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
2221 ixgbe_setup_mux_ctl(hw);
2226 /** ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype
2228 * @hw: pointer to hardware structure
2229 * @enable: enable or disable switch for Ethertype anti-spoofing
2230 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
2232 static void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
2233 bool enable, int vf)
2235 int vf_target_reg = vf >> 3;
2236 int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
2239 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
2241 pfvfspoof |= (1 << vf_target_shift);
2243 pfvfspoof &= ~(1 << vf_target_shift);
2245 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
2248 /** ixgbe_set_source_address_pruning_X550 - Enable/Disbale src address pruning
2249 * @hw: pointer to hardware structure
2250 * @enable: enable or disable source address pruning
2251 * @pool: Rx pool to set source address pruning for
2253 static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw,
2259 /* max rx pool is 63 */
2263 pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
2264 pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
2267 pfflp |= (1ULL << pool);
2269 pfflp &= ~(1ULL << pool);
2271 IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
2272 IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
2276 * ixgbe_set_mux - Set mux for port 1 access with CS4227
2277 * @hw: pointer to hardware structure
2278 * @state: set mux if 1, clear if 0
2280 static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
2284 if (!hw->bus.lan_id)
2286 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2288 esdp |= IXGBE_ESDP_SDP1;
2290 esdp &= ~IXGBE_ESDP_SDP1;
2291 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2292 IXGBE_WRITE_FLUSH(hw);
2296 * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
2297 * @hw: pointer to hardware structure
2298 * @mask: Mask to specify which semaphore to acquire
2300 * Acquires the SWFW semaphore and sets the I2C MUX
2302 static s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
2306 status = ixgbe_acquire_swfw_sync_X540(hw, mask);
2310 if (mask & IXGBE_GSSR_I2C_MASK)
2311 ixgbe_set_mux(hw, 1);
2317 * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
2318 * @hw: pointer to hardware structure
2319 * @mask: Mask to specify which semaphore to release
2321 * Releases the SWFW semaphore and sets the I2C MUX
2323 static void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
2325 if (mask & IXGBE_GSSR_I2C_MASK)
2326 ixgbe_set_mux(hw, 0);
2328 ixgbe_release_swfw_sync_X540(hw, mask);
2331 #define X550_COMMON_MAC \
2332 .init_hw = &ixgbe_init_hw_generic, \
2333 .start_hw = &ixgbe_start_hw_X540, \
2334 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, \
2335 .enable_rx_dma = &ixgbe_enable_rx_dma_generic, \
2336 .get_mac_addr = &ixgbe_get_mac_addr_generic, \
2337 .get_device_caps = &ixgbe_get_device_caps_generic, \
2338 .stop_adapter = &ixgbe_stop_adapter_generic, \
2339 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \
2340 .read_analog_reg8 = NULL, \
2341 .write_analog_reg8 = NULL, \
2342 .set_rxpba = &ixgbe_set_rxpba_generic, \
2343 .check_link = &ixgbe_check_mac_link_generic, \
2344 .led_on = &ixgbe_led_on_generic, \
2345 .led_off = &ixgbe_led_off_generic, \
2346 .blink_led_start = &ixgbe_blink_led_start_X540, \
2347 .blink_led_stop = &ixgbe_blink_led_stop_X540, \
2348 .set_rar = &ixgbe_set_rar_generic, \
2349 .clear_rar = &ixgbe_clear_rar_generic, \
2350 .set_vmdq = &ixgbe_set_vmdq_generic, \
2351 .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, \
2352 .clear_vmdq = &ixgbe_clear_vmdq_generic, \
2353 .init_rx_addrs = &ixgbe_init_rx_addrs_generic, \
2354 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, \
2355 .enable_mc = &ixgbe_enable_mc_generic, \
2356 .disable_mc = &ixgbe_disable_mc_generic, \
2357 .clear_vfta = &ixgbe_clear_vfta_generic, \
2358 .set_vfta = &ixgbe_set_vfta_generic, \
2359 .fc_enable = &ixgbe_fc_enable_generic, \
2360 .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, \
2361 .init_uta_tables = &ixgbe_init_uta_tables_generic, \
2362 .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, \
2363 .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, \
2364 .set_source_address_pruning = \
2365 &ixgbe_set_source_address_pruning_X550, \
2366 .set_ethertype_anti_spoofing = \
2367 &ixgbe_set_ethertype_anti_spoofing_X550, \
2368 .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \
2369 .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \
2370 .get_thermal_sensor_data = NULL, \
2371 .init_thermal_sensor_thresh = NULL, \
2372 .prot_autoc_read = &prot_autoc_read_generic, \
2373 .prot_autoc_write = &prot_autoc_write_generic, \
2374 .enable_rx = &ixgbe_enable_rx_generic, \
2375 .disable_rx = &ixgbe_disable_rx_x550, \
2377 static struct ixgbe_mac_operations mac_ops_X550 = {
2379 .reset_hw = &ixgbe_reset_hw_X540,
2380 .get_media_type = &ixgbe_get_media_type_X540,
2381 .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
2382 .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
2383 .setup_link = &ixgbe_setup_mac_link_X540,
2384 .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
2385 .get_bus_info = &ixgbe_get_bus_info_generic,
2387 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540,
2388 .release_swfw_sync = &ixgbe_release_swfw_sync_X540,
2391 static struct ixgbe_mac_operations mac_ops_X550EM_x = {
2393 .reset_hw = &ixgbe_reset_hw_X550em,
2394 .get_media_type = &ixgbe_get_media_type_X550em,
2395 .get_san_mac_addr = NULL,
2396 .get_wwn_prefix = NULL,
2397 .setup_link = NULL, /* defined later */
2398 .get_link_capabilities = &ixgbe_get_link_capabilities_X550em,
2399 .get_bus_info = &ixgbe_get_bus_info_X550em,
2400 .setup_sfp = ixgbe_setup_sfp_modules_X550em,
2401 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em,
2402 .release_swfw_sync = &ixgbe_release_swfw_sync_X550em,
2405 #define X550_COMMON_EEP \
2406 .read = &ixgbe_read_ee_hostif_X550, \
2407 .read_buffer = &ixgbe_read_ee_hostif_buffer_X550, \
2408 .write = &ixgbe_write_ee_hostif_X550, \
2409 .write_buffer = &ixgbe_write_ee_hostif_buffer_X550, \
2410 .validate_checksum = &ixgbe_validate_eeprom_checksum_X550, \
2411 .update_checksum = &ixgbe_update_eeprom_checksum_X550, \
2412 .calc_checksum = &ixgbe_calc_eeprom_checksum_X550, \
2414 static struct ixgbe_eeprom_operations eeprom_ops_X550 = {
2416 .init_params = &ixgbe_init_eeprom_params_X550,
2419 static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
2421 .init_params = &ixgbe_init_eeprom_params_X540,
2424 #define X550_COMMON_PHY \
2425 .identify_sfp = &ixgbe_identify_module_generic, \
2427 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, \
2428 .read_i2c_byte = &ixgbe_read_i2c_byte_generic, \
2429 .write_i2c_byte = &ixgbe_write_i2c_byte_generic, \
2430 .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, \
2431 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, \
2432 .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, \
2433 .read_reg = &ixgbe_read_phy_reg_generic, \
2434 .write_reg = &ixgbe_write_phy_reg_generic, \
2435 .setup_link = &ixgbe_setup_phy_link_generic, \
2436 .set_phy_power = NULL, \
2437 .check_overtemp = &ixgbe_tn_check_overtemp, \
2438 .get_firmware_version = &ixgbe_get_phy_firmware_version_generic,
2440 static struct ixgbe_phy_operations phy_ops_X550 = {
2443 .identify = &ixgbe_identify_phy_generic,
2446 static struct ixgbe_phy_operations phy_ops_X550EM_x = {
2448 .init = &ixgbe_init_phy_ops_X550em,
2449 .identify = &ixgbe_identify_phy_x550em,
2450 .read_i2c_combined = &ixgbe_read_i2c_combined_generic,
2451 .write_i2c_combined = &ixgbe_write_i2c_combined_generic,
2452 .read_i2c_combined_unlocked = &ixgbe_read_i2c_combined_generic_unlocked,
2453 .write_i2c_combined_unlocked =
2454 &ixgbe_write_i2c_combined_generic_unlocked,
2457 static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
2458 IXGBE_MVALS_INIT(X550)
2461 static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = {
2462 IXGBE_MVALS_INIT(X550EM_x)
2465 struct ixgbe_info ixgbe_X550_info = {
2466 .mac = ixgbe_mac_X550,
2467 .get_invariants = &ixgbe_get_invariants_X540,
2468 .mac_ops = &mac_ops_X550,
2469 .eeprom_ops = &eeprom_ops_X550,
2470 .phy_ops = &phy_ops_X550,
2471 .mbx_ops = &mbx_ops_generic,
2472 .mvals = ixgbe_mvals_X550,
2475 struct ixgbe_info ixgbe_X550EM_x_info = {
2476 .mac = ixgbe_mac_X550EM_x,
2477 .get_invariants = &ixgbe_get_invariants_X550_x,
2478 .mac_ops = &mac_ops_X550EM_x,
2479 .eeprom_ops = &eeprom_ops_X550EM_x,
2480 .phy_ops = &phy_ops_X550EM_x,
2481 .mbx_ops = &mbx_ops_generic,
2482 .mvals = ixgbe_mvals_X550EM_x,