drivers/net/wireless/ath/ath10k/wmi.h

   1 /*
   2  * Copyright (c) 2005-2011 Atheros Communications Inc.
   3  * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  */
  17
  18 #ifndef _WMI_H_
  19 #define _WMI_H_
  20
  21 #include <linux/types.h>
  22 #include <net/mac80211.h>
  23
  24 /*
  25  * This file specifies the WMI interface for the Unified Software
  26  * Architecture.
  27  *
  28  * It includes definitions of all the commands and events. Commands are
  29  * messages from the host to the target. Events and Replies are messages
  30  * from the target to the host.
  31  *
  32  * Ownership of correctness in regards to WMI commands belongs to the host
  33  * driver and the target is not required to validate parameters for value,
  34  * proper range, or any other checking.
  35  *
  36  * Guidelines for extending this interface are below.
  37  *
  38  * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
  39  *
  40  * 2. Use ONLY u32 type for defining member variables within WMI
  41  *    command/event structures. Do not use u8, u16, bool or
  42  *    enum types within these structures.
  43  *
  44  * 3. DO NOT define bit fields within structures. Implement bit fields
  45  *    using masks if necessary. Do not use the programming language's bit
  46  *    field definition.
  47  *
  48  * 4. Define macros for encode/decode of u8, u16 fields within
  49  *    the u32 variables. Use these macros for set/get of these fields.
  50  *    Try to use this to optimize the structure without bloating it with
  51  *    u32 variables for every lower sized field.
  52  *
  53  * 5. Do not use PACK/UNPACK attributes for the structures as each member
  54  *    variable is already 4-byte aligned by virtue of being a u32
  55  *    type.
  56  *
  57  * 6. Comment each parameter part of the WMI command/event structure by
  58  *    using the 2 stars at the begining of C comment instead of one star to
  59  *    enable HTML document generation using Doxygen.
  60  *
  61  */
  62
  63 /* Control Path */
  64 struct wmi_cmd_hdr {
  65         __le32 cmd_id;
  66 } __packed;
  67
  68 #define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
  69 #define WMI_CMD_HDR_CMD_ID_LSB    0
  70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
  71 #define WMI_CMD_HDR_PLT_PRIV_LSB  24
  72
  73 #define HTC_PROTOCOL_VERSION    0x0002
  74 #define WMI_PROTOCOL_VERSION    0x0002
  75
  76 /*
  77  * There is no signed version of __le32, so for a temporary solution come
  78  * up with our own version. The idea is from fs/ntfs/types.h.
  79  *
  80  * Use a_ prefix so that it doesn't conflict if we get proper support to
  81  * linux/types.h.
  82  */
  83 typedef __s32 __bitwise a_sle32;
  84
  85 static inline a_sle32 a_cpu_to_sle32(s32 val)
  86 {
  87         return (__force a_sle32)cpu_to_le32(val);
  88 }
  89
  90 static inline s32 a_sle32_to_cpu(a_sle32 val)
  91 {
  92         return le32_to_cpu((__force __le32)val);
  93 }
  94
  95 enum wmi_service {
  96         WMI_SERVICE_BEACON_OFFLOAD = 0,
  97         WMI_SERVICE_SCAN_OFFLOAD,
  98         WMI_SERVICE_ROAM_OFFLOAD,
  99         WMI_SERVICE_BCN_MISS_OFFLOAD,
 100         WMI_SERVICE_STA_PWRSAVE,
 101         WMI_SERVICE_STA_ADVANCED_PWRSAVE,
 102         WMI_SERVICE_AP_UAPSD,
 103         WMI_SERVICE_AP_DFS,
 104         WMI_SERVICE_11AC,
 105         WMI_SERVICE_BLOCKACK,
 106         WMI_SERVICE_PHYERR,
 107         WMI_SERVICE_BCN_FILTER,
 108         WMI_SERVICE_RTT,
 109         WMI_SERVICE_RATECTRL,
 110         WMI_SERVICE_WOW,
 111         WMI_SERVICE_RATECTRL_CACHE,
 112         WMI_SERVICE_IRAM_TIDS,
 113         WMI_SERVICE_ARPNS_OFFLOAD,
 114         WMI_SERVICE_NLO,
 115         WMI_SERVICE_GTK_OFFLOAD,
 116         WMI_SERVICE_SCAN_SCH,
 117         WMI_SERVICE_CSA_OFFLOAD,
 118         WMI_SERVICE_CHATTER,
 119         WMI_SERVICE_COEX_FREQAVOID,
 120         WMI_SERVICE_PACKET_POWER_SAVE,
 121         WMI_SERVICE_FORCE_FW_HANG,
 122         WMI_SERVICE_GPIO,
 123         WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 124         WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 125         WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 126         WMI_SERVICE_STA_KEEP_ALIVE,
 127         WMI_SERVICE_TX_ENCAP,
 128         WMI_SERVICE_BURST,
 129         WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 130         WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 131         WMI_SERVICE_ROAM_SCAN_OFFLOAD,
 132         WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 133         WMI_SERVICE_EARLY_RX,
 134         WMI_SERVICE_STA_SMPS,
 135         WMI_SERVICE_FWTEST,
 136         WMI_SERVICE_STA_WMMAC,
 137         WMI_SERVICE_TDLS,
 138         WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
 139         WMI_SERVICE_ADAPTIVE_OCS,
 140         WMI_SERVICE_BA_SSN_SUPPORT,
 141         WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
 142         WMI_SERVICE_WLAN_HB,
 143         WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
 144         WMI_SERVICE_BATCH_SCAN,
 145         WMI_SERVICE_QPOWER,
 146         WMI_SERVICE_PLMREQ,
 147         WMI_SERVICE_THERMAL_MGMT,
 148         WMI_SERVICE_RMC,
 149         WMI_SERVICE_MHF_OFFLOAD,
 150         WMI_SERVICE_COEX_SAR,
 151         WMI_SERVICE_BCN_TXRATE_OVERRIDE,
 152         WMI_SERVICE_NAN,
 153         WMI_SERVICE_L1SS_STAT,
 154         WMI_SERVICE_ESTIMATE_LINKSPEED,
 155         WMI_SERVICE_OBSS_SCAN,
 156         WMI_SERVICE_TDLS_OFFCHAN,
 157         WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
 158         WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
 159         WMI_SERVICE_IBSS_PWRSAVE,
 160         WMI_SERVICE_LPASS,
 161         WMI_SERVICE_EXTSCAN,
 162         WMI_SERVICE_D0WOW,
 163         WMI_SERVICE_HSOFFLOAD,
 164         WMI_SERVICE_ROAM_HO_OFFLOAD,
 165         WMI_SERVICE_RX_FULL_REORDER,
 166         WMI_SERVICE_DHCP_OFFLOAD,
 167         WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
 168         WMI_SERVICE_MDNS_OFFLOAD,
 169         WMI_SERVICE_SAP_AUTH_OFFLOAD,
 170         WMI_SERVICE_ATF,
 171         WMI_SERVICE_COEX_GPIO,
 172         WMI_SERVICE_ENHANCED_PROXY_STA,
 173         WMI_SERVICE_TT,
 174         WMI_SERVICE_PEER_CACHING,
 175         WMI_SERVICE_AUX_SPECTRAL_INTF,
 176         WMI_SERVICE_AUX_CHAN_LOAD_INTF,
 177         WMI_SERVICE_BSS_CHANNEL_INFO_64,
 178
 179         /* keep last */
 180         WMI_SERVICE_MAX,
 181 };
 182
 183 enum wmi_10x_service {
 184         WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
 185         WMI_10X_SERVICE_SCAN_OFFLOAD,
 186         WMI_10X_SERVICE_ROAM_OFFLOAD,
 187         WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 188         WMI_10X_SERVICE_STA_PWRSAVE,
 189         WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 190         WMI_10X_SERVICE_AP_UAPSD,
 191         WMI_10X_SERVICE_AP_DFS,
 192         WMI_10X_SERVICE_11AC,
 193         WMI_10X_SERVICE_BLOCKACK,
 194         WMI_10X_SERVICE_PHYERR,
 195         WMI_10X_SERVICE_BCN_FILTER,
 196         WMI_10X_SERVICE_RTT,
 197         WMI_10X_SERVICE_RATECTRL,
 198         WMI_10X_SERVICE_WOW,
 199         WMI_10X_SERVICE_RATECTRL_CACHE,
 200         WMI_10X_SERVICE_IRAM_TIDS,
 201         WMI_10X_SERVICE_BURST,
 202
 203         /* introduced in 10.2 */
 204         WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 205         WMI_10X_SERVICE_FORCE_FW_HANG,
 206         WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 207         WMI_10X_SERVICE_ATF,
 208         WMI_10X_SERVICE_COEX_GPIO,
 209 };
 210
 211 enum wmi_main_service {
 212         WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
 213         WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 214         WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 215         WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 216         WMI_MAIN_SERVICE_STA_PWRSAVE,
 217         WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 218         WMI_MAIN_SERVICE_AP_UAPSD,
 219         WMI_MAIN_SERVICE_AP_DFS,
 220         WMI_MAIN_SERVICE_11AC,
 221         WMI_MAIN_SERVICE_BLOCKACK,
 222         WMI_MAIN_SERVICE_PHYERR,
 223         WMI_MAIN_SERVICE_BCN_FILTER,
 224         WMI_MAIN_SERVICE_RTT,
 225         WMI_MAIN_SERVICE_RATECTRL,
 226         WMI_MAIN_SERVICE_WOW,
 227         WMI_MAIN_SERVICE_RATECTRL_CACHE,
 228         WMI_MAIN_SERVICE_IRAM_TIDS,
 229         WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 230         WMI_MAIN_SERVICE_NLO,
 231         WMI_MAIN_SERVICE_GTK_OFFLOAD,
 232         WMI_MAIN_SERVICE_SCAN_SCH,
 233         WMI_MAIN_SERVICE_CSA_OFFLOAD,
 234         WMI_MAIN_SERVICE_CHATTER,
 235         WMI_MAIN_SERVICE_COEX_FREQAVOID,
 236         WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 237         WMI_MAIN_SERVICE_FORCE_FW_HANG,
 238         WMI_MAIN_SERVICE_GPIO,
 239         WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 240         WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 241         WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 242         WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 243         WMI_MAIN_SERVICE_TX_ENCAP,
 244 };
 245
 246 enum wmi_10_4_service {
 247         WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
 248         WMI_10_4_SERVICE_SCAN_OFFLOAD,
 249         WMI_10_4_SERVICE_ROAM_OFFLOAD,
 250         WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 251         WMI_10_4_SERVICE_STA_PWRSAVE,
 252         WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 253         WMI_10_4_SERVICE_AP_UAPSD,
 254         WMI_10_4_SERVICE_AP_DFS,
 255         WMI_10_4_SERVICE_11AC,
 256         WMI_10_4_SERVICE_BLOCKACK,
 257         WMI_10_4_SERVICE_PHYERR,
 258         WMI_10_4_SERVICE_BCN_FILTER,
 259         WMI_10_4_SERVICE_RTT,
 260         WMI_10_4_SERVICE_RATECTRL,
 261         WMI_10_4_SERVICE_WOW,
 262         WMI_10_4_SERVICE_RATECTRL_CACHE,
 263         WMI_10_4_SERVICE_IRAM_TIDS,
 264         WMI_10_4_SERVICE_BURST,
 265         WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 266         WMI_10_4_SERVICE_GTK_OFFLOAD,
 267         WMI_10_4_SERVICE_SCAN_SCH,
 268         WMI_10_4_SERVICE_CSA_OFFLOAD,
 269         WMI_10_4_SERVICE_CHATTER,
 270         WMI_10_4_SERVICE_COEX_FREQAVOID,
 271         WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 272         WMI_10_4_SERVICE_FORCE_FW_HANG,
 273         WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 274         WMI_10_4_SERVICE_GPIO,
 275         WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 276         WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 277         WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 278         WMI_10_4_SERVICE_TX_ENCAP,
 279         WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 280         WMI_10_4_SERVICE_EARLY_RX,
 281         WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 282         WMI_10_4_SERVICE_TT,
 283         WMI_10_4_SERVICE_ATF,
 284         WMI_10_4_SERVICE_PEER_CACHING,
 285         WMI_10_4_SERVICE_COEX_GPIO,
 286         WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 287         WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 288         WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 289 };
 290
 291 static inline char *wmi_service_name(int service_id)
 292 {
 293 #define SVCSTR(x) case x: return #x
 294
 295         switch (service_id) {
 296         SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
 297         SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
 298         SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
 299         SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
 300         SVCSTR(WMI_SERVICE_STA_PWRSAVE);
 301         SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
 302         SVCSTR(WMI_SERVICE_AP_UAPSD);
 303         SVCSTR(WMI_SERVICE_AP_DFS);
 304         SVCSTR(WMI_SERVICE_11AC);
 305         SVCSTR(WMI_SERVICE_BLOCKACK);
 306         SVCSTR(WMI_SERVICE_PHYERR);
 307         SVCSTR(WMI_SERVICE_BCN_FILTER);
 308         SVCSTR(WMI_SERVICE_RTT);
 309         SVCSTR(WMI_SERVICE_RATECTRL);
 310         SVCSTR(WMI_SERVICE_WOW);
 311         SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
 312         SVCSTR(WMI_SERVICE_IRAM_TIDS);
 313         SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
 314         SVCSTR(WMI_SERVICE_NLO);
 315         SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
 316         SVCSTR(WMI_SERVICE_SCAN_SCH);
 317         SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
 318         SVCSTR(WMI_SERVICE_CHATTER);
 319         SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
 320         SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
 321         SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
 322         SVCSTR(WMI_SERVICE_GPIO);
 323         SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
 324         SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
 325         SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
 326         SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
 327         SVCSTR(WMI_SERVICE_TX_ENCAP);
 328         SVCSTR(WMI_SERVICE_BURST);
 329         SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
 330         SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
 331         SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
 332         SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
 333         SVCSTR(WMI_SERVICE_EARLY_RX);
 334         SVCSTR(WMI_SERVICE_STA_SMPS);
 335         SVCSTR(WMI_SERVICE_FWTEST);
 336         SVCSTR(WMI_SERVICE_STA_WMMAC);
 337         SVCSTR(WMI_SERVICE_TDLS);
 338         SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
 339         SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
 340         SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
 341         SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
 342         SVCSTR(WMI_SERVICE_WLAN_HB);
 343         SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
 344         SVCSTR(WMI_SERVICE_BATCH_SCAN);
 345         SVCSTR(WMI_SERVICE_QPOWER);
 346         SVCSTR(WMI_SERVICE_PLMREQ);
 347         SVCSTR(WMI_SERVICE_THERMAL_MGMT);
 348         SVCSTR(WMI_SERVICE_RMC);
 349         SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
 350         SVCSTR(WMI_SERVICE_COEX_SAR);
 351         SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
 352         SVCSTR(WMI_SERVICE_NAN);
 353         SVCSTR(WMI_SERVICE_L1SS_STAT);
 354         SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
 355         SVCSTR(WMI_SERVICE_OBSS_SCAN);
 356         SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
 357         SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
 358         SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
 359         SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
 360         SVCSTR(WMI_SERVICE_LPASS);
 361         SVCSTR(WMI_SERVICE_EXTSCAN);
 362         SVCSTR(WMI_SERVICE_D0WOW);
 363         SVCSTR(WMI_SERVICE_HSOFFLOAD);
 364         SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
 365         SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
 366         SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
 367         SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
 368         SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
 369         SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
 370         SVCSTR(WMI_SERVICE_ATF);
 371         SVCSTR(WMI_SERVICE_COEX_GPIO);
 372         SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
 373         SVCSTR(WMI_SERVICE_TT);
 374         SVCSTR(WMI_SERVICE_PEER_CACHING);
 375         SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
 376         SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
 377         SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 378         default:
 379                 return NULL;
 380         }
 381
 382 #undef SVCSTR
 383 }
 384
 385 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 386         ((svc_id) < (len) && \
 387          __le32_to_cpu((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \
 388          BIT((svc_id)%(sizeof(u32))))
 389
 390 #define SVCMAP(x, y, len) \
 391         do { \
 392                 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \
 393                         __set_bit(y, out); \
 394         } while (0)
 395
 396 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 397                                    size_t len)
 398 {
 399         SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
 400                WMI_SERVICE_BEACON_OFFLOAD, len);
 401         SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
 402                WMI_SERVICE_SCAN_OFFLOAD, len);
 403         SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
 404                WMI_SERVICE_ROAM_OFFLOAD, len);
 405         SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 406                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 407         SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
 408                WMI_SERVICE_STA_PWRSAVE, len);
 409         SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 410                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 411         SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
 412                WMI_SERVICE_AP_UAPSD, len);
 413         SVCMAP(WMI_10X_SERVICE_AP_DFS,
 414                WMI_SERVICE_AP_DFS, len);
 415         SVCMAP(WMI_10X_SERVICE_11AC,
 416                WMI_SERVICE_11AC, len);
 417         SVCMAP(WMI_10X_SERVICE_BLOCKACK,
 418                WMI_SERVICE_BLOCKACK, len);
 419         SVCMAP(WMI_10X_SERVICE_PHYERR,
 420                WMI_SERVICE_PHYERR, len);
 421         SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
 422                WMI_SERVICE_BCN_FILTER, len);
 423         SVCMAP(WMI_10X_SERVICE_RTT,
 424                WMI_SERVICE_RTT, len);
 425         SVCMAP(WMI_10X_SERVICE_RATECTRL,
 426                WMI_SERVICE_RATECTRL, len);
 427         SVCMAP(WMI_10X_SERVICE_WOW,
 428                WMI_SERVICE_WOW, len);
 429         SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
 430                WMI_SERVICE_RATECTRL_CACHE, len);
 431         SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
 432                WMI_SERVICE_IRAM_TIDS, len);
 433         SVCMAP(WMI_10X_SERVICE_BURST,
 434                WMI_SERVICE_BURST, len);
 435         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 436                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 437         SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
 438                WMI_SERVICE_FORCE_FW_HANG, len);
 439         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 440                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 441         SVCMAP(WMI_10X_SERVICE_ATF,
 442                WMI_SERVICE_ATF, len);
 443         SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
 444                WMI_SERVICE_COEX_GPIO, len);
 445 }
 446
 447 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
 448                                     size_t len)
 449 {
 450         SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
 451                WMI_SERVICE_BEACON_OFFLOAD, len);
 452         SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 453                WMI_SERVICE_SCAN_OFFLOAD, len);
 454         SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 455                WMI_SERVICE_ROAM_OFFLOAD, len);
 456         SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 457                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 458         SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
 459                WMI_SERVICE_STA_PWRSAVE, len);
 460         SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 461                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 462         SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
 463                WMI_SERVICE_AP_UAPSD, len);
 464         SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
 465                WMI_SERVICE_AP_DFS, len);
 466         SVCMAP(WMI_MAIN_SERVICE_11AC,
 467                WMI_SERVICE_11AC, len);
 468         SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
 469                WMI_SERVICE_BLOCKACK, len);
 470         SVCMAP(WMI_MAIN_SERVICE_PHYERR,
 471                WMI_SERVICE_PHYERR, len);
 472         SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
 473                WMI_SERVICE_BCN_FILTER, len);
 474         SVCMAP(WMI_MAIN_SERVICE_RTT,
 475                WMI_SERVICE_RTT, len);
 476         SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
 477                WMI_SERVICE_RATECTRL, len);
 478         SVCMAP(WMI_MAIN_SERVICE_WOW,
 479                WMI_SERVICE_WOW, len);
 480         SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
 481                WMI_SERVICE_RATECTRL_CACHE, len);
 482         SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
 483                WMI_SERVICE_IRAM_TIDS, len);
 484         SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 485                WMI_SERVICE_ARPNS_OFFLOAD, len);
 486         SVCMAP(WMI_MAIN_SERVICE_NLO,
 487                WMI_SERVICE_NLO, len);
 488         SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
 489                WMI_SERVICE_GTK_OFFLOAD, len);
 490         SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
 491                WMI_SERVICE_SCAN_SCH, len);
 492         SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
 493                WMI_SERVICE_CSA_OFFLOAD, len);
 494         SVCMAP(WMI_MAIN_SERVICE_CHATTER,
 495                WMI_SERVICE_CHATTER, len);
 496         SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
 497                WMI_SERVICE_COEX_FREQAVOID, len);
 498         SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 499                WMI_SERVICE_PACKET_POWER_SAVE, len);
 500         SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
 501                WMI_SERVICE_FORCE_FW_HANG, len);
 502         SVCMAP(WMI_MAIN_SERVICE_GPIO,
 503                WMI_SERVICE_GPIO, len);
 504         SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 505                WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
 506         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 507                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 508         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 509                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 510         SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 511                WMI_SERVICE_STA_KEEP_ALIVE, len);
 512         SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
 513                WMI_SERVICE_TX_ENCAP, len);
 514 }
 515
 516 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 517                                     size_t len)
 518 {
 519         SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
 520                WMI_SERVICE_BEACON_OFFLOAD, len);
 521         SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
 522                WMI_SERVICE_SCAN_OFFLOAD, len);
 523         SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
 524                WMI_SERVICE_ROAM_OFFLOAD, len);
 525         SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 526                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 527         SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
 528                WMI_SERVICE_STA_PWRSAVE, len);
 529         SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 530                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 531         SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
 532                WMI_SERVICE_AP_UAPSD, len);
 533         SVCMAP(WMI_10_4_SERVICE_AP_DFS,
 534                WMI_SERVICE_AP_DFS, len);
 535         SVCMAP(WMI_10_4_SERVICE_11AC,
 536                WMI_SERVICE_11AC, len);
 537         SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
 538                WMI_SERVICE_BLOCKACK, len);
 539         SVCMAP(WMI_10_4_SERVICE_PHYERR,
 540                WMI_SERVICE_PHYERR, len);
 541         SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
 542                WMI_SERVICE_BCN_FILTER, len);
 543         SVCMAP(WMI_10_4_SERVICE_RTT,
 544                WMI_SERVICE_RTT, len);
 545         SVCMAP(WMI_10_4_SERVICE_RATECTRL,
 546                WMI_SERVICE_RATECTRL, len);
 547         SVCMAP(WMI_10_4_SERVICE_WOW,
 548                WMI_SERVICE_WOW, len);
 549         SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
 550                WMI_SERVICE_RATECTRL_CACHE, len);
 551         SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
 552                WMI_SERVICE_IRAM_TIDS, len);
 553         SVCMAP(WMI_10_4_SERVICE_BURST,
 554                WMI_SERVICE_BURST, len);
 555         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 556                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 557         SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
 558                WMI_SERVICE_GTK_OFFLOAD, len);
 559         SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
 560                WMI_SERVICE_SCAN_SCH, len);
 561         SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
 562                WMI_SERVICE_CSA_OFFLOAD, len);
 563         SVCMAP(WMI_10_4_SERVICE_CHATTER,
 564                WMI_SERVICE_CHATTER, len);
 565         SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
 566                WMI_SERVICE_COEX_FREQAVOID, len);
 567         SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 568                WMI_SERVICE_PACKET_POWER_SAVE, len);
 569         SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
 570                WMI_SERVICE_FORCE_FW_HANG, len);
 571         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 572                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 573         SVCMAP(WMI_10_4_SERVICE_GPIO,
 574                WMI_SERVICE_GPIO, len);
 575         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 576                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 577         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 578                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 579         SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 580                WMI_SERVICE_STA_KEEP_ALIVE, len);
 581         SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
 582                WMI_SERVICE_TX_ENCAP, len);
 583         SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 584                WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
 585         SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
 586                WMI_SERVICE_EARLY_RX, len);
 587         SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 588                WMI_SERVICE_ENHANCED_PROXY_STA, len);
 589         SVCMAP(WMI_10_4_SERVICE_TT,
 590                WMI_SERVICE_TT, len);
 591         SVCMAP(WMI_10_4_SERVICE_ATF,
 592                WMI_SERVICE_ATF, len);
 593         SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
 594                WMI_SERVICE_PEER_CACHING, len);
 595         SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
 596                WMI_SERVICE_COEX_GPIO, len);
 597         SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 598                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 599         SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 600                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 601         SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 602                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 603 }
 604
 605 #undef SVCMAP
 606
 607 /* 2 word representation of MAC addr */
 608 struct wmi_mac_addr {
 609         union {
 610                 u8 addr[6];
 611                 struct {
 612                         u32 word0;
 613                         u32 word1;
 614                 } __packed;
 615         } __packed;
 616 } __packed;
 617
 618 struct wmi_cmd_map {
 619         u32 init_cmdid;
 620         u32 start_scan_cmdid;
 621         u32 stop_scan_cmdid;
 622         u32 scan_chan_list_cmdid;
 623         u32 scan_sch_prio_tbl_cmdid;
 624         u32 pdev_set_regdomain_cmdid;
 625         u32 pdev_set_channel_cmdid;
 626         u32 pdev_set_param_cmdid;
 627         u32 pdev_pktlog_enable_cmdid;
 628         u32 pdev_pktlog_disable_cmdid;
 629         u32 pdev_set_wmm_params_cmdid;
 630         u32 pdev_set_ht_cap_ie_cmdid;
 631         u32 pdev_set_vht_cap_ie_cmdid;
 632         u32 pdev_set_dscp_tid_map_cmdid;
 633         u32 pdev_set_quiet_mode_cmdid;
 634         u32 pdev_green_ap_ps_enable_cmdid;
 635         u32 pdev_get_tpc_config_cmdid;
 636         u32 pdev_set_base_macaddr_cmdid;
 637         u32 vdev_create_cmdid;
 638         u32 vdev_delete_cmdid;
 639         u32 vdev_start_request_cmdid;
 640         u32 vdev_restart_request_cmdid;
 641         u32 vdev_up_cmdid;
 642         u32 vdev_stop_cmdid;
 643         u32 vdev_down_cmdid;
 644         u32 vdev_set_param_cmdid;
 645         u32 vdev_install_key_cmdid;
 646         u32 peer_create_cmdid;
 647         u32 peer_delete_cmdid;
 648         u32 peer_flush_tids_cmdid;
 649         u32 peer_set_param_cmdid;
 650         u32 peer_assoc_cmdid;
 651         u32 peer_add_wds_entry_cmdid;
 652         u32 peer_remove_wds_entry_cmdid;
 653         u32 peer_mcast_group_cmdid;
 654         u32 bcn_tx_cmdid;
 655         u32 pdev_send_bcn_cmdid;
 656         u32 bcn_tmpl_cmdid;
 657         u32 bcn_filter_rx_cmdid;
 658         u32 prb_req_filter_rx_cmdid;
 659         u32 mgmt_tx_cmdid;
 660         u32 prb_tmpl_cmdid;
 661         u32 addba_clear_resp_cmdid;
 662         u32 addba_send_cmdid;
 663         u32 addba_status_cmdid;
 664         u32 delba_send_cmdid;
 665         u32 addba_set_resp_cmdid;
 666         u32 send_singleamsdu_cmdid;
 667         u32 sta_powersave_mode_cmdid;
 668         u32 sta_powersave_param_cmdid;
 669         u32 sta_mimo_ps_mode_cmdid;
 670         u32 pdev_dfs_enable_cmdid;
 671         u32 pdev_dfs_disable_cmdid;
 672         u32 roam_scan_mode;
 673         u32 roam_scan_rssi_threshold;
 674         u32 roam_scan_period;
 675         u32 roam_scan_rssi_change_threshold;
 676         u32 roam_ap_profile;
 677         u32 ofl_scan_add_ap_profile;
 678         u32 ofl_scan_remove_ap_profile;
 679         u32 ofl_scan_period;
 680         u32 p2p_dev_set_device_info;
 681         u32 p2p_dev_set_discoverability;
 682         u32 p2p_go_set_beacon_ie;
 683         u32 p2p_go_set_probe_resp_ie;
 684         u32 p2p_set_vendor_ie_data_cmdid;
 685         u32 ap_ps_peer_param_cmdid;
 686         u32 ap_ps_peer_uapsd_coex_cmdid;
 687         u32 peer_rate_retry_sched_cmdid;
 688         u32 wlan_profile_trigger_cmdid;
 689         u32 wlan_profile_set_hist_intvl_cmdid;
 690         u32 wlan_profile_get_profile_data_cmdid;
 691         u32 wlan_profile_enable_profile_id_cmdid;
 692         u32 wlan_profile_list_profile_id_cmdid;
 693         u32 pdev_suspend_cmdid;
 694         u32 pdev_resume_cmdid;
 695         u32 add_bcn_filter_cmdid;
 696         u32 rmv_bcn_filter_cmdid;
 697         u32 wow_add_wake_pattern_cmdid;
 698         u32 wow_del_wake_pattern_cmdid;
 699         u32 wow_enable_disable_wake_event_cmdid;
 700         u32 wow_enable_cmdid;
 701         u32 wow_hostwakeup_from_sleep_cmdid;
 702         u32 rtt_measreq_cmdid;
 703         u32 rtt_tsf_cmdid;
 704         u32 vdev_spectral_scan_configure_cmdid;
 705         u32 vdev_spectral_scan_enable_cmdid;
 706         u32 request_stats_cmdid;
 707         u32 set_arp_ns_offload_cmdid;
 708         u32 network_list_offload_config_cmdid;
 709         u32 gtk_offload_cmdid;
 710         u32 csa_offload_enable_cmdid;
 711         u32 csa_offload_chanswitch_cmdid;
 712         u32 chatter_set_mode_cmdid;
 713         u32 peer_tid_addba_cmdid;
 714         u32 peer_tid_delba_cmdid;
 715         u32 sta_dtim_ps_method_cmdid;
 716         u32 sta_uapsd_auto_trig_cmdid;
 717         u32 sta_keepalive_cmd;
 718         u32 echo_cmdid;
 719         u32 pdev_utf_cmdid;
 720         u32 dbglog_cfg_cmdid;
 721         u32 pdev_qvit_cmdid;
 722         u32 pdev_ftm_intg_cmdid;
 723         u32 vdev_set_keepalive_cmdid;
 724         u32 vdev_get_keepalive_cmdid;
 725         u32 force_fw_hang_cmdid;
 726         u32 gpio_config_cmdid;
 727         u32 gpio_output_cmdid;
 728         u32 pdev_get_temperature_cmdid;
 729         u32 vdev_set_wmm_params_cmdid;
 730         u32 tdls_set_state_cmdid;
 731         u32 tdls_peer_update_cmdid;
 732         u32 adaptive_qcs_cmdid;
 733         u32 scan_update_request_cmdid;
 734         u32 vdev_standby_response_cmdid;
 735         u32 vdev_resume_response_cmdid;
 736         u32 wlan_peer_caching_add_peer_cmdid;
 737         u32 wlan_peer_caching_evict_peer_cmdid;
 738         u32 wlan_peer_caching_restore_peer_cmdid;
 739         u32 wlan_peer_caching_print_all_peers_info_cmdid;
 740         u32 peer_update_wds_entry_cmdid;
 741         u32 peer_add_proxy_sta_entry_cmdid;
 742         u32 rtt_keepalive_cmdid;
 743         u32 oem_req_cmdid;
 744         u32 nan_cmdid;
 745         u32 vdev_ratemask_cmdid;
 746         u32 qboost_cfg_cmdid;
 747         u32 pdev_smart_ant_enable_cmdid;
 748         u32 pdev_smart_ant_set_rx_antenna_cmdid;
 749         u32 peer_smart_ant_set_tx_antenna_cmdid;
 750         u32 peer_smart_ant_set_train_info_cmdid;
 751         u32 peer_smart_ant_set_node_config_ops_cmdid;
 752         u32 pdev_set_antenna_switch_table_cmdid;
 753         u32 pdev_set_ctl_table_cmdid;
 754         u32 pdev_set_mimogain_table_cmdid;
 755         u32 pdev_ratepwr_table_cmdid;
 756         u32 pdev_ratepwr_chainmsk_table_cmdid;
 757         u32 pdev_fips_cmdid;
 758         u32 tt_set_conf_cmdid;
 759         u32 fwtest_cmdid;
 760         u32 vdev_atf_request_cmdid;
 761         u32 peer_atf_request_cmdid;
 762         u32 pdev_get_ani_cck_config_cmdid;
 763         u32 pdev_get_ani_ofdm_config_cmdid;
 764         u32 pdev_reserve_ast_entry_cmdid;
 765         u32 pdev_get_nfcal_power_cmdid;
 766         u32 pdev_get_tpc_cmdid;
 767         u32 pdev_get_ast_info_cmdid;
 768         u32 vdev_set_dscp_tid_map_cmdid;
 769         u32 pdev_get_info_cmdid;
 770         u32 vdev_get_info_cmdid;
 771         u32 vdev_filter_neighbor_rx_packets_cmdid;
 772         u32 mu_cal_start_cmdid;
 773         u32 set_cca_params_cmdid;
 774         u32 pdev_bss_chan_info_request_cmdid;
 775         u32 pdev_enable_adaptive_cca_cmdid;
 776 };
 777
 778 /*
 779  * wmi command groups.
 780  */
 781 enum wmi_cmd_group {
 782         /* 0 to 2 are reserved */
 783         WMI_GRP_START = 0x3,
 784         WMI_GRP_SCAN = WMI_GRP_START,
 785         WMI_GRP_PDEV,
 786         WMI_GRP_VDEV,
 787         WMI_GRP_PEER,
 788         WMI_GRP_MGMT,
 789         WMI_GRP_BA_NEG,
 790         WMI_GRP_STA_PS,
 791         WMI_GRP_DFS,
 792         WMI_GRP_ROAM,
 793         WMI_GRP_OFL_SCAN,
 794         WMI_GRP_P2P,
 795         WMI_GRP_AP_PS,
 796         WMI_GRP_RATE_CTRL,
 797         WMI_GRP_PROFILE,
 798         WMI_GRP_SUSPEND,
 799         WMI_GRP_BCN_FILTER,
 800         WMI_GRP_WOW,
 801         WMI_GRP_RTT,
 802         WMI_GRP_SPECTRAL,
 803         WMI_GRP_STATS,
 804         WMI_GRP_ARP_NS_OFL,
 805         WMI_GRP_NLO_OFL,
 806         WMI_GRP_GTK_OFL,
 807         WMI_GRP_CSA_OFL,
 808         WMI_GRP_CHATTER,
 809         WMI_GRP_TID_ADDBA,
 810         WMI_GRP_MISC,
 811         WMI_GRP_GPIO,
 812 };
 813
 814 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
 815 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
 816
 817 #define WMI_CMD_UNSUPPORTED 0
 818
 819 /* Command IDs and command events for MAIN FW. */
 820 enum wmi_cmd_id {
 821         WMI_INIT_CMDID = 0x1,
 822
 823         /* Scan specific commands */
 824         WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
 825         WMI_STOP_SCAN_CMDID,
 826         WMI_SCAN_CHAN_LIST_CMDID,
 827         WMI_SCAN_SCH_PRIO_TBL_CMDID,
 828
 829         /* PDEV (physical device) specific commands */
 830         WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
 831         WMI_PDEV_SET_CHANNEL_CMDID,
 832         WMI_PDEV_SET_PARAM_CMDID,
 833         WMI_PDEV_PKTLOG_ENABLE_CMDID,
 834         WMI_PDEV_PKTLOG_DISABLE_CMDID,
 835         WMI_PDEV_SET_WMM_PARAMS_CMDID,
 836         WMI_PDEV_SET_HT_CAP_IE_CMDID,
 837         WMI_PDEV_SET_VHT_CAP_IE_CMDID,
 838         WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
 839         WMI_PDEV_SET_QUIET_MODE_CMDID,
 840         WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
 841         WMI_PDEV_GET_TPC_CONFIG_CMDID,
 842         WMI_PDEV_SET_BASE_MACADDR_CMDID,
 843
 844         /* VDEV (virtual device) specific commands */
 845         WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
 846         WMI_VDEV_DELETE_CMDID,
 847         WMI_VDEV_START_REQUEST_CMDID,
 848         WMI_VDEV_RESTART_REQUEST_CMDID,
 849         WMI_VDEV_UP_CMDID,
 850         WMI_VDEV_STOP_CMDID,
 851         WMI_VDEV_DOWN_CMDID,
 852         WMI_VDEV_SET_PARAM_CMDID,
 853         WMI_VDEV_INSTALL_KEY_CMDID,
 854
 855         /* peer specific commands */
 856         WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
 857         WMI_PEER_DELETE_CMDID,
 858         WMI_PEER_FLUSH_TIDS_CMDID,
 859         WMI_PEER_SET_PARAM_CMDID,
 860         WMI_PEER_ASSOC_CMDID,
 861         WMI_PEER_ADD_WDS_ENTRY_CMDID,
 862         WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
 863         WMI_PEER_MCAST_GROUP_CMDID,
 864
 865         /* beacon/management specific commands */
 866         WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
 867         WMI_PDEV_SEND_BCN_CMDID,
 868         WMI_BCN_TMPL_CMDID,
 869         WMI_BCN_FILTER_RX_CMDID,
 870         WMI_PRB_REQ_FILTER_RX_CMDID,
 871         WMI_MGMT_TX_CMDID,
 872         WMI_PRB_TMPL_CMDID,
 873
 874         /* commands to directly control BA negotiation directly from host. */
 875         WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
 876         WMI_ADDBA_SEND_CMDID,
 877         WMI_ADDBA_STATUS_CMDID,
 878         WMI_DELBA_SEND_CMDID,
 879         WMI_ADDBA_SET_RESP_CMDID,
 880         WMI_SEND_SINGLEAMSDU_CMDID,
 881
 882         /* Station power save specific config */
 883         WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
 884         WMI_STA_POWERSAVE_PARAM_CMDID,
 885         WMI_STA_MIMO_PS_MODE_CMDID,
 886
 887         /** DFS-specific commands */
 888         WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
 889         WMI_PDEV_DFS_DISABLE_CMDID,
 890
 891         /* Roaming specific  commands */
 892         WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
 893         WMI_ROAM_SCAN_RSSI_THRESHOLD,
 894         WMI_ROAM_SCAN_PERIOD,
 895         WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
 896         WMI_ROAM_AP_PROFILE,
 897
 898         /* offload scan specific commands */
 899         WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
 900         WMI_OFL_SCAN_REMOVE_AP_PROFILE,
 901         WMI_OFL_SCAN_PERIOD,
 902
 903         /* P2P specific commands */
 904         WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
 905         WMI_P2P_DEV_SET_DISCOVERABILITY,
 906         WMI_P2P_GO_SET_BEACON_IE,
 907         WMI_P2P_GO_SET_PROBE_RESP_IE,
 908         WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
 909
 910         /* AP power save specific config */
 911         WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
 912         WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
 913
 914         /* Rate-control specific commands */
 915         WMI_PEER_RATE_RETRY_SCHED_CMDID =
 916         WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
 917
 918         /* WLAN Profiling commands. */
 919         WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
 920         WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
 921         WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
 922         WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
 923         WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
 924
 925         /* Suspend resume command Ids */
 926         WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
 927         WMI_PDEV_RESUME_CMDID,
 928
 929         /* Beacon filter commands */
 930         WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
 931         WMI_RMV_BCN_FILTER_CMDID,
 932
 933         /* WOW Specific WMI commands*/
 934         WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
 935         WMI_WOW_DEL_WAKE_PATTERN_CMDID,
 936         WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
 937         WMI_WOW_ENABLE_CMDID,
 938         WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
 939
 940         /* RTT measurement related cmd */
 941         WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
 942         WMI_RTT_TSF_CMDID,
 943
 944         /* spectral scan commands */
 945         WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
 946         WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
 947
 948         /* F/W stats */
 949         WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
 950
 951         /* ARP OFFLOAD REQUEST*/
 952         WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
 953
 954         /* NS offload confid*/
 955         WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
 956
 957         /* GTK offload Specific WMI commands*/
 958         WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
 959
 960         /* CSA offload Specific WMI commands*/
 961         WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
 962         WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
 963
 964         /* Chatter commands*/
 965         WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
 966
 967         /* addba specific commands */
 968         WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
 969         WMI_PEER_TID_DELBA_CMDID,
 970
 971         /* set station mimo powersave method */
 972         WMI_STA_DTIM_PS_METHOD_CMDID,
 973         /* Configure the Station UAPSD AC Auto Trigger Parameters */
 974         WMI_STA_UAPSD_AUTO_TRIG_CMDID,
 975
 976         /* STA Keep alive parameter configuration,
 977            Requires WMI_SERVICE_STA_KEEP_ALIVE */
 978         WMI_STA_KEEPALIVE_CMD,
 979
 980         /* misc command group */
 981         WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
 982         WMI_PDEV_UTF_CMDID,
 983         WMI_DBGLOG_CFG_CMDID,
 984         WMI_PDEV_QVIT_CMDID,
 985         WMI_PDEV_FTM_INTG_CMDID,
 986         WMI_VDEV_SET_KEEPALIVE_CMDID,
 987         WMI_VDEV_GET_KEEPALIVE_CMDID,
 988         WMI_FORCE_FW_HANG_CMDID,
 989
 990         /* GPIO Configuration */
 991         WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
 992         WMI_GPIO_OUTPUT_CMDID,
 993 };
 994
 995 enum wmi_event_id {
 996         WMI_SERVICE_READY_EVENTID = 0x1,
 997         WMI_READY_EVENTID,
 998
 999         /* Scan specific events */
1000         WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1001
1002         /* PDEV specific events */
1003         WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1004         WMI_CHAN_INFO_EVENTID,
1005         WMI_PHYERR_EVENTID,
1006
1007         /* VDEV specific events */
1008         WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1009         WMI_VDEV_STOPPED_EVENTID,
1010         WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1011
1012         /* peer specific events */
1013         WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1014
1015         /* beacon/mgmt specific events */
1016         WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1017         WMI_HOST_SWBA_EVENTID,
1018         WMI_TBTTOFFSET_UPDATE_EVENTID,
1019
1020         /* ADDBA Related WMI Events*/
1021         WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1022         WMI_TX_ADDBA_COMPLETE_EVENTID,
1023
1024         /* Roam event to trigger roaming on host */
1025         WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1026         WMI_PROFILE_MATCH,
1027
1028         /* WoW */
1029         WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1030
1031         /* RTT */
1032         WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1033         WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1034         WMI_RTT_ERROR_REPORT_EVENTID,
1035
1036         /* GTK offload */
1037         WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1038         WMI_GTK_REKEY_FAIL_EVENTID,
1039
1040         /* CSA IE received event */
1041         WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1042
1043         /* Misc events */
1044         WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1045         WMI_PDEV_UTF_EVENTID,
1046         WMI_DEBUG_MESG_EVENTID,
1047         WMI_UPDATE_STATS_EVENTID,
1048         WMI_DEBUG_PRINT_EVENTID,
1049         WMI_DCS_INTERFERENCE_EVENTID,
1050         WMI_PDEV_QVIT_EVENTID,
1051         WMI_WLAN_PROFILE_DATA_EVENTID,
1052         WMI_PDEV_FTM_INTG_EVENTID,
1053         WMI_WLAN_FREQ_AVOID_EVENTID,
1054         WMI_VDEV_GET_KEEPALIVE_EVENTID,
1055
1056         /* GPIO Event */
1057         WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1058 };
1059
1060 /* Command IDs and command events for 10.X firmware */
1061 enum wmi_10x_cmd_id {
1062         WMI_10X_START_CMDID = 0x9000,
1063         WMI_10X_END_CMDID = 0x9FFF,
1064
1065         /* initialize the wlan sub system */
1066         WMI_10X_INIT_CMDID,
1067
1068         /* Scan specific commands */
1069
1070         WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1071         WMI_10X_STOP_SCAN_CMDID,
1072         WMI_10X_SCAN_CHAN_LIST_CMDID,
1073         WMI_10X_ECHO_CMDID,
1074
1075         /* PDEV(physical device) specific commands */
1076         WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1077         WMI_10X_PDEV_SET_CHANNEL_CMDID,
1078         WMI_10X_PDEV_SET_PARAM_CMDID,
1079         WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1080         WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1081         WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1082         WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1083         WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1084         WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1085         WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1086         WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1087         WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1088         WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1089
1090         /* VDEV(virtual device) specific commands */
1091         WMI_10X_VDEV_CREATE_CMDID,
1092         WMI_10X_VDEV_DELETE_CMDID,
1093         WMI_10X_VDEV_START_REQUEST_CMDID,
1094         WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1095         WMI_10X_VDEV_UP_CMDID,
1096         WMI_10X_VDEV_STOP_CMDID,
1097         WMI_10X_VDEV_DOWN_CMDID,
1098         WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1099         WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1100         WMI_10X_VDEV_SET_PARAM_CMDID,
1101         WMI_10X_VDEV_INSTALL_KEY_CMDID,
1102
1103         /* peer specific commands */
1104         WMI_10X_PEER_CREATE_CMDID,
1105         WMI_10X_PEER_DELETE_CMDID,
1106         WMI_10X_PEER_FLUSH_TIDS_CMDID,
1107         WMI_10X_PEER_SET_PARAM_CMDID,
1108         WMI_10X_PEER_ASSOC_CMDID,
1109         WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1110         WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1111         WMI_10X_PEER_MCAST_GROUP_CMDID,
1112
1113         /* beacon/management specific commands */
1114
1115         WMI_10X_BCN_TX_CMDID,
1116         WMI_10X_BCN_PRB_TMPL_CMDID,
1117         WMI_10X_BCN_FILTER_RX_CMDID,
1118         WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1119         WMI_10X_MGMT_TX_CMDID,
1120
1121         /* commands to directly control ba negotiation directly from host. */
1122         WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1123         WMI_10X_ADDBA_SEND_CMDID,
1124         WMI_10X_ADDBA_STATUS_CMDID,
1125         WMI_10X_DELBA_SEND_CMDID,
1126         WMI_10X_ADDBA_SET_RESP_CMDID,
1127         WMI_10X_SEND_SINGLEAMSDU_CMDID,
1128
1129         /* Station power save specific config */
1130         WMI_10X_STA_POWERSAVE_MODE_CMDID,
1131         WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1132         WMI_10X_STA_MIMO_PS_MODE_CMDID,
1133
1134         /* set debug log config */
1135         WMI_10X_DBGLOG_CFG_CMDID,
1136
1137         /* DFS-specific commands */
1138         WMI_10X_PDEV_DFS_ENABLE_CMDID,
1139         WMI_10X_PDEV_DFS_DISABLE_CMDID,
1140
1141         /* QVIT specific command id */
1142         WMI_10X_PDEV_QVIT_CMDID,
1143
1144         /* Offload Scan and Roaming related  commands */
1145         WMI_10X_ROAM_SCAN_MODE,
1146         WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1147         WMI_10X_ROAM_SCAN_PERIOD,
1148         WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1149         WMI_10X_ROAM_AP_PROFILE,
1150         WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1151         WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1152         WMI_10X_OFL_SCAN_PERIOD,
1153
1154         /* P2P specific commands */
1155         WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1156         WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1157         WMI_10X_P2P_GO_SET_BEACON_IE,
1158         WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1159
1160         /* AP power save specific config */
1161         WMI_10X_AP_PS_PEER_PARAM_CMDID,
1162         WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1163
1164         /* Rate-control specific commands */
1165         WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1166
1167         /* WLAN Profiling commands. */
1168         WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1169         WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1170         WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1171         WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1172         WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1173
1174         /* Suspend resume command Ids */
1175         WMI_10X_PDEV_SUSPEND_CMDID,
1176         WMI_10X_PDEV_RESUME_CMDID,
1177
1178         /* Beacon filter commands */
1179         WMI_10X_ADD_BCN_FILTER_CMDID,
1180         WMI_10X_RMV_BCN_FILTER_CMDID,
1181
1182         /* WOW Specific WMI commands*/
1183         WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1184         WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1185         WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1186         WMI_10X_WOW_ENABLE_CMDID,
1187         WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1188
1189         /* RTT measurement related cmd */
1190         WMI_10X_RTT_MEASREQ_CMDID,
1191         WMI_10X_RTT_TSF_CMDID,
1192
1193         /* transmit beacon by value */
1194         WMI_10X_PDEV_SEND_BCN_CMDID,
1195
1196         /* F/W stats */
1197         WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1198         WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1199         WMI_10X_REQUEST_STATS_CMDID,
1200
1201         /* GPIO Configuration */
1202         WMI_10X_GPIO_CONFIG_CMDID,
1203         WMI_10X_GPIO_OUTPUT_CMDID,
1204
1205         WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1206 };
1207
1208 enum wmi_10x_event_id {
1209         WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1210         WMI_10X_READY_EVENTID,
1211         WMI_10X_START_EVENTID = 0x9000,
1212         WMI_10X_END_EVENTID = 0x9FFF,
1213
1214         /* Scan specific events */
1215         WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1216         WMI_10X_ECHO_EVENTID,
1217         WMI_10X_DEBUG_MESG_EVENTID,
1218         WMI_10X_UPDATE_STATS_EVENTID,
1219
1220         /* Instantaneous RSSI event */
1221         WMI_10X_INST_RSSI_STATS_EVENTID,
1222
1223         /* VDEV specific events */
1224         WMI_10X_VDEV_START_RESP_EVENTID,
1225         WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1226         WMI_10X_VDEV_RESUME_REQ_EVENTID,
1227         WMI_10X_VDEV_STOPPED_EVENTID,
1228
1229         /* peer  specific events */
1230         WMI_10X_PEER_STA_KICKOUT_EVENTID,
1231
1232         /* beacon/mgmt specific events */
1233         WMI_10X_HOST_SWBA_EVENTID,
1234         WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1235         WMI_10X_MGMT_RX_EVENTID,
1236
1237         /* Channel stats event */
1238         WMI_10X_CHAN_INFO_EVENTID,
1239
1240         /* PHY Error specific WMI event */
1241         WMI_10X_PHYERR_EVENTID,
1242
1243         /* Roam event to trigger roaming on host */
1244         WMI_10X_ROAM_EVENTID,
1245
1246         /* matching AP found from list of profiles */
1247         WMI_10X_PROFILE_MATCH,
1248
1249         /* debug print message used for tracing FW code while debugging */
1250         WMI_10X_DEBUG_PRINT_EVENTID,
1251         /* VI spoecific event */
1252         WMI_10X_PDEV_QVIT_EVENTID,
1253         /* FW code profile data in response to profile request */
1254         WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1255
1256         /*RTT related event ID*/
1257         WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1258         WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1259         WMI_10X_RTT_ERROR_REPORT_EVENTID,
1260
1261         WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1262         WMI_10X_DCS_INTERFERENCE_EVENTID,
1263
1264         /* TPC config for the current operating channel */
1265         WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1266
1267         WMI_10X_GPIO_INPUT_EVENTID,
1268         WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1,
1269 };
1270
1271 enum wmi_10_2_cmd_id {
1272         WMI_10_2_START_CMDID = 0x9000,
1273         WMI_10_2_END_CMDID = 0x9FFF,
1274         WMI_10_2_INIT_CMDID,
1275         WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1276         WMI_10_2_STOP_SCAN_CMDID,
1277         WMI_10_2_SCAN_CHAN_LIST_CMDID,
1278         WMI_10_2_ECHO_CMDID,
1279         WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1280         WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1281         WMI_10_2_PDEV_SET_PARAM_CMDID,
1282         WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1283         WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1284         WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1285         WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1286         WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1287         WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1288         WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1289         WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1290         WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1291         WMI_10_2_VDEV_CREATE_CMDID,
1292         WMI_10_2_VDEV_DELETE_CMDID,
1293         WMI_10_2_VDEV_START_REQUEST_CMDID,
1294         WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1295         WMI_10_2_VDEV_UP_CMDID,
1296         WMI_10_2_VDEV_STOP_CMDID,
1297         WMI_10_2_VDEV_DOWN_CMDID,
1298         WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1299         WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1300         WMI_10_2_VDEV_SET_PARAM_CMDID,
1301         WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1302         WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1303         WMI_10_2_PEER_CREATE_CMDID,
1304         WMI_10_2_PEER_DELETE_CMDID,
1305         WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1306         WMI_10_2_PEER_SET_PARAM_CMDID,
1307         WMI_10_2_PEER_ASSOC_CMDID,
1308         WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1309         WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1310         WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1311         WMI_10_2_PEER_MCAST_GROUP_CMDID,
1312         WMI_10_2_BCN_TX_CMDID,
1313         WMI_10_2_BCN_PRB_TMPL_CMDID,
1314         WMI_10_2_BCN_FILTER_RX_CMDID,
1315         WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1316         WMI_10_2_MGMT_TX_CMDID,
1317         WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1318         WMI_10_2_ADDBA_SEND_CMDID,
1319         WMI_10_2_ADDBA_STATUS_CMDID,
1320         WMI_10_2_DELBA_SEND_CMDID,
1321         WMI_10_2_ADDBA_SET_RESP_CMDID,
1322         WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1323         WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1324         WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1325         WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1326         WMI_10_2_DBGLOG_CFG_CMDID,
1327         WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1328         WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1329         WMI_10_2_PDEV_QVIT_CMDID,
1330         WMI_10_2_ROAM_SCAN_MODE,
1331         WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1332         WMI_10_2_ROAM_SCAN_PERIOD,
1333         WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1334         WMI_10_2_ROAM_AP_PROFILE,
1335         WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1336         WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1337         WMI_10_2_OFL_SCAN_PERIOD,
1338         WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1339         WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1340         WMI_10_2_P2P_GO_SET_BEACON_IE,
1341         WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1342         WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1343         WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1344         WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1345         WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1346         WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1347         WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1348         WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1349         WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1350         WMI_10_2_PDEV_SUSPEND_CMDID,
1351         WMI_10_2_PDEV_RESUME_CMDID,
1352         WMI_10_2_ADD_BCN_FILTER_CMDID,
1353         WMI_10_2_RMV_BCN_FILTER_CMDID,
1354         WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1355         WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1356         WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1357         WMI_10_2_WOW_ENABLE_CMDID,
1358         WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1359         WMI_10_2_RTT_MEASREQ_CMDID,
1360         WMI_10_2_RTT_TSF_CMDID,
1361         WMI_10_2_RTT_KEEPALIVE_CMDID,
1362         WMI_10_2_PDEV_SEND_BCN_CMDID,
1363         WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1364         WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1365         WMI_10_2_REQUEST_STATS_CMDID,
1366         WMI_10_2_GPIO_CONFIG_CMDID,
1367         WMI_10_2_GPIO_OUTPUT_CMDID,
1368         WMI_10_2_VDEV_RATEMASK_CMDID,
1369         WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1370         WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1371         WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1372         WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1373         WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1374         WMI_10_2_FORCE_FW_HANG_CMDID,
1375         WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1376         WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1377         WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1378         WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1379         WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1380         WMI_10_2_PDEV_GET_INFO,
1381         WMI_10_2_VDEV_GET_INFO,
1382         WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1383         WMI_10_2_PEER_ATF_REQUEST_CMDID,
1384         WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1385         WMI_10_2_MU_CAL_START_CMDID,
1386         WMI_10_2_SET_LTEU_CONFIG_CMDID,
1387         WMI_10_2_SET_CCA_PARAMS,
1388         WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1389 };
1390
1391 enum wmi_10_2_event_id {
1392         WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1393         WMI_10_2_READY_EVENTID,
1394         WMI_10_2_DEBUG_MESG_EVENTID,
1395         WMI_10_2_START_EVENTID = 0x9000,
1396         WMI_10_2_END_EVENTID = 0x9FFF,
1397         WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1398         WMI_10_2_ECHO_EVENTID,
1399         WMI_10_2_UPDATE_STATS_EVENTID,
1400         WMI_10_2_INST_RSSI_STATS_EVENTID,
1401         WMI_10_2_VDEV_START_RESP_EVENTID,
1402         WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1403         WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1404         WMI_10_2_VDEV_STOPPED_EVENTID,
1405         WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1406         WMI_10_2_HOST_SWBA_EVENTID,
1407         WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1408         WMI_10_2_MGMT_RX_EVENTID,
1409         WMI_10_2_CHAN_INFO_EVENTID,
1410         WMI_10_2_PHYERR_EVENTID,
1411         WMI_10_2_ROAM_EVENTID,
1412         WMI_10_2_PROFILE_MATCH,
1413         WMI_10_2_DEBUG_PRINT_EVENTID,
1414         WMI_10_2_PDEV_QVIT_EVENTID,
1415         WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1416         WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1417         WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1418         WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1419         WMI_10_2_RTT_KEEPALIVE_EVENTID,
1420         WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1421         WMI_10_2_DCS_INTERFERENCE_EVENTID,
1422         WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1423         WMI_10_2_GPIO_INPUT_EVENTID,
1424         WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1425         WMI_10_2_GENERIC_BUFFER_EVENTID,
1426         WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1427         WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1428         WMI_10_2_WDS_PEER_EVENTID,
1429         WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1430         WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1431         WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1432 };
1433
1434 enum wmi_10_4_cmd_id {
1435         WMI_10_4_START_CMDID = 0x9000,
1436         WMI_10_4_END_CMDID = 0x9FFF,
1437         WMI_10_4_INIT_CMDID,
1438         WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1439         WMI_10_4_STOP_SCAN_CMDID,
1440         WMI_10_4_SCAN_CHAN_LIST_CMDID,
1441         WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1442         WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1443         WMI_10_4_ECHO_CMDID,
1444         WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1445         WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1446         WMI_10_4_PDEV_SET_PARAM_CMDID,
1447         WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1448         WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1449         WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1450         WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1451         WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1452         WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1453         WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1454         WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1455         WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1456         WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1457         WMI_10_4_VDEV_CREATE_CMDID,
1458         WMI_10_4_VDEV_DELETE_CMDID,
1459         WMI_10_4_VDEV_START_REQUEST_CMDID,
1460         WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1461         WMI_10_4_VDEV_UP_CMDID,
1462         WMI_10_4_VDEV_STOP_CMDID,
1463         WMI_10_4_VDEV_DOWN_CMDID,
1464         WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1465         WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1466         WMI_10_4_VDEV_SET_PARAM_CMDID,
1467         WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1468         WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1469         WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1470         WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1471         WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1472         WMI_10_4_PEER_CREATE_CMDID,
1473         WMI_10_4_PEER_DELETE_CMDID,
1474         WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1475         WMI_10_4_PEER_SET_PARAM_CMDID,
1476         WMI_10_4_PEER_ASSOC_CMDID,
1477         WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1478         WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1479         WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1480         WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1481         WMI_10_4_PEER_MCAST_GROUP_CMDID,
1482         WMI_10_4_BCN_TX_CMDID,
1483         WMI_10_4_PDEV_SEND_BCN_CMDID,
1484         WMI_10_4_BCN_PRB_TMPL_CMDID,
1485         WMI_10_4_BCN_FILTER_RX_CMDID,
1486         WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1487         WMI_10_4_MGMT_TX_CMDID,
1488         WMI_10_4_PRB_TMPL_CMDID,
1489         WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1490         WMI_10_4_ADDBA_SEND_CMDID,
1491         WMI_10_4_ADDBA_STATUS_CMDID,
1492         WMI_10_4_DELBA_SEND_CMDID,
1493         WMI_10_4_ADDBA_SET_RESP_CMDID,
1494         WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1495         WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1496         WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1497         WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1498         WMI_10_4_DBGLOG_CFG_CMDID,
1499         WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1500         WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1501         WMI_10_4_PDEV_QVIT_CMDID,
1502         WMI_10_4_ROAM_SCAN_MODE,
1503         WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1504         WMI_10_4_ROAM_SCAN_PERIOD,
1505         WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1506         WMI_10_4_ROAM_AP_PROFILE,
1507         WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1508         WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1509         WMI_10_4_OFL_SCAN_PERIOD,
1510         WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1511         WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1512         WMI_10_4_P2P_GO_SET_BEACON_IE,
1513         WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1514         WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1515         WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1516         WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1517         WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1518         WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1519         WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1520         WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1521         WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1522         WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1523         WMI_10_4_PDEV_SUSPEND_CMDID,
1524         WMI_10_4_PDEV_RESUME_CMDID,
1525         WMI_10_4_ADD_BCN_FILTER_CMDID,
1526         WMI_10_4_RMV_BCN_FILTER_CMDID,
1527         WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1528         WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1529         WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1530         WMI_10_4_WOW_ENABLE_CMDID,
1531         WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1532         WMI_10_4_RTT_MEASREQ_CMDID,
1533         WMI_10_4_RTT_TSF_CMDID,
1534         WMI_10_4_RTT_KEEPALIVE_CMDID,
1535         WMI_10_4_OEM_REQ_CMDID,
1536         WMI_10_4_NAN_CMDID,
1537         WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1538         WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1539         WMI_10_4_REQUEST_STATS_CMDID,
1540         WMI_10_4_GPIO_CONFIG_CMDID,
1541         WMI_10_4_GPIO_OUTPUT_CMDID,
1542         WMI_10_4_VDEV_RATEMASK_CMDID,
1543         WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1544         WMI_10_4_GTK_OFFLOAD_CMDID,
1545         WMI_10_4_QBOOST_CFG_CMDID,
1546         WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1547         WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1548         WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1549         WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1550         WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1551         WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1552         WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1553         WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1554         WMI_10_4_FORCE_FW_HANG_CMDID,
1555         WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1556         WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1557         WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1558         WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1559         WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1560         WMI_10_4_PDEV_FIPS_CMDID,
1561         WMI_10_4_TT_SET_CONF_CMDID,
1562         WMI_10_4_FWTEST_CMDID,
1563         WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1564         WMI_10_4_PEER_ATF_REQUEST_CMDID,
1565         WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1566         WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1567         WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1568         WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1569         WMI_10_4_PDEV_GET_TPC_CMDID,
1570         WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1571         WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1572         WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1573         WMI_10_4_PDEV_GET_INFO_CMDID,
1574         WMI_10_4_VDEV_GET_INFO_CMDID,
1575         WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1576         WMI_10_4_MU_CAL_START_CMDID,
1577         WMI_10_4_SET_CCA_PARAMS_CMDID,
1578         WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1579         WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1580 };
1581
1582 enum wmi_10_4_event_id {
1583         WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1584         WMI_10_4_READY_EVENTID,
1585         WMI_10_4_DEBUG_MESG_EVENTID,
1586         WMI_10_4_START_EVENTID = 0x9000,
1587         WMI_10_4_END_EVENTID = 0x9FFF,
1588         WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1589         WMI_10_4_ECHO_EVENTID,
1590         WMI_10_4_UPDATE_STATS_EVENTID,
1591         WMI_10_4_INST_RSSI_STATS_EVENTID,
1592         WMI_10_4_VDEV_START_RESP_EVENTID,
1593         WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1594         WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1595         WMI_10_4_VDEV_STOPPED_EVENTID,
1596         WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1597         WMI_10_4_HOST_SWBA_EVENTID,
1598         WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1599         WMI_10_4_MGMT_RX_EVENTID,
1600         WMI_10_4_CHAN_INFO_EVENTID,
1601         WMI_10_4_PHYERR_EVENTID,
1602         WMI_10_4_ROAM_EVENTID,
1603         WMI_10_4_PROFILE_MATCH,
1604         WMI_10_4_DEBUG_PRINT_EVENTID,
1605         WMI_10_4_PDEV_QVIT_EVENTID,
1606         WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1607         WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1608         WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1609         WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1610         WMI_10_4_RTT_KEEPALIVE_EVENTID,
1611         WMI_10_4_OEM_CAPABILITY_EVENTID,
1612         WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1613         WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1614         WMI_10_4_NAN_EVENTID,
1615         WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1616         WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1617         WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1618         WMI_10_4_DCS_INTERFERENCE_EVENTID,
1619         WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1620         WMI_10_4_CSA_HANDLING_EVENTID,
1621         WMI_10_4_GPIO_INPUT_EVENTID,
1622         WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1623         WMI_10_4_GENERIC_BUFFER_EVENTID,
1624         WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1625         WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1626         WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1627         WMI_10_4_WDS_PEER_EVENTID,
1628         WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1629         WMI_10_4_PDEV_FIPS_EVENTID,
1630         WMI_10_4_TT_STATS_EVENTID,
1631         WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1632         WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1633         WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1634         WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1635         WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1636         WMI_10_4_PDEV_TPC_EVENTID,
1637         WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1638         WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1639         WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1640         WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1641         WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1642 };
1643
1644 enum wmi_phy_mode {
1645         MODE_11A        = 0,   /* 11a Mode */
1646         MODE_11G        = 1,   /* 11b/g Mode */
1647         MODE_11B        = 2,   /* 11b Mode */
1648         MODE_11GONLY    = 3,   /* 11g only Mode */
1649         MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1650         MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1651         MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1652         MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1653         MODE_11AC_VHT20 = 8,
1654         MODE_11AC_VHT40 = 9,
1655         MODE_11AC_VHT80 = 10,
1656         /*    MODE_11AC_VHT160 = 11, */
1657         MODE_11AC_VHT20_2G = 11,
1658         MODE_11AC_VHT40_2G = 12,
1659         MODE_11AC_VHT80_2G = 13,
1660         MODE_UNKNOWN    = 14,
1661         MODE_MAX        = 14
1662 };
1663
1664 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1665 {
1666         switch (mode) {
1667         case MODE_11A:
1668                 return "11a";
1669         case MODE_11G:
1670                 return "11g";
1671         case MODE_11B:
1672                 return "11b";
1673         case MODE_11GONLY:
1674                 return "11gonly";
1675         case MODE_11NA_HT20:
1676                 return "11na-ht20";
1677         case MODE_11NG_HT20:
1678                 return "11ng-ht20";
1679         case MODE_11NA_HT40:
1680                 return "11na-ht40";
1681         case MODE_11NG_HT40:
1682                 return "11ng-ht40";
1683         case MODE_11AC_VHT20:
1684                 return "11ac-vht20";
1685         case MODE_11AC_VHT40:
1686                 return "11ac-vht40";
1687         case MODE_11AC_VHT80:
1688                 return "11ac-vht80";
1689         case MODE_11AC_VHT20_2G:
1690                 return "11ac-vht20-2g";
1691         case MODE_11AC_VHT40_2G:
1692                 return "11ac-vht40-2g";
1693         case MODE_11AC_VHT80_2G:
1694                 return "11ac-vht80-2g";
1695         case MODE_UNKNOWN:
1696                 /* skip */
1697                 break;
1698
1699                 /* no default handler to allow compiler to check that the
1700                  * enum is fully handled */
1701         };
1702
1703         return "<unknown>";
1704 }
1705
1706 #define WMI_CHAN_LIST_TAG       0x1
1707 #define WMI_SSID_LIST_TAG       0x2
1708 #define WMI_BSSID_LIST_TAG      0x3
1709 #define WMI_IE_TAG              0x4
1710
1711 struct wmi_channel {
1712         __le32 mhz;
1713         __le32 band_center_freq1;
1714         __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
1715         union {
1716                 __le32 flags; /* WMI_CHAN_FLAG_ */
1717                 struct {
1718                         u8 mode; /* only 6 LSBs */
1719                 } __packed;
1720         } __packed;
1721         union {
1722                 __le32 reginfo0;
1723                 struct {
1724                         /* note: power unit is 0.5 dBm */
1725                         u8 min_power;
1726                         u8 max_power;
1727                         u8 reg_power;
1728                         u8 reg_classid;
1729                 } __packed;
1730         } __packed;
1731         union {
1732                 __le32 reginfo1;
1733                 struct {
1734                         u8 antenna_max;
1735                 } __packed;
1736         } __packed;
1737 } __packed;
1738
1739 struct wmi_channel_arg {
1740         u32 freq;
1741         u32 band_center_freq1;
1742         bool passive;
1743         bool allow_ibss;
1744         bool allow_ht;
1745         bool allow_vht;
1746         bool ht40plus;
1747         bool chan_radar;
1748         /* note: power unit is 0.5 dBm */
1749         u32 min_power;
1750         u32 max_power;
1751         u32 max_reg_power;
1752         u32 max_antenna_gain;
1753         u32 reg_class_id;
1754         enum wmi_phy_mode mode;
1755 };
1756
1757 enum wmi_channel_change_cause {
1758         WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
1759         WMI_CHANNEL_CHANGE_CAUSE_CSA,
1760 };
1761
1762 #define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
1763 #define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
1764 #define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
1765 #define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
1766 #define WMI_CHAN_FLAG_DFS            (1 << 10)
1767 #define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
1768 #define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
1769
1770 /* Indicate reason for channel switch */
1771 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
1772
1773 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
1774 #define WMI_10_4_MAX_SPATIAL_STREAM   4
1775
1776 /* HT Capabilities*/
1777 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
1778 #define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
1779 #define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
1780 #define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
1781 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
1782 #define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
1783 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
1784 #define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
1785 #define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
1786 #define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
1787 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
1788 #define WMI_HT_CAP_HT40_SGI               0x0800
1789
1790 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
1791                                 WMI_HT_CAP_HT20_SGI      | \
1792                                 WMI_HT_CAP_HT40_SGI      | \
1793                                 WMI_HT_CAP_TX_STBC       | \
1794                                 WMI_HT_CAP_RX_STBC       | \
1795                                 WMI_HT_CAP_LDPC)
1796
1797 /*
1798  * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
1799  * field. The fields not defined here are not supported, or reserved.
1800  * Do not change these masks and if you have to add new one follow the
1801  * bitmask as specified by 802.11ac draft.
1802  */
1803
1804 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
1805 #define WMI_VHT_CAP_RX_LDPC                      0x00000010
1806 #define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
1807 #define WMI_VHT_CAP_TX_STBC                      0x00000080
1808 #define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
1809 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
1810 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
1811 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
1812 #define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
1813 #define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
1814
1815 /* The following also refer for max HT AMSDU */
1816 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
1817 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
1818 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
1819
1820 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
1821                                  WMI_VHT_CAP_RX_LDPC             | \
1822                                  WMI_VHT_CAP_SGI_80MHZ           | \
1823                                  WMI_VHT_CAP_TX_STBC             | \
1824                                  WMI_VHT_CAP_RX_STBC_MASK        | \
1825                                  WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
1826                                  WMI_VHT_CAP_RX_FIXED_ANT        | \
1827                                  WMI_VHT_CAP_TX_FIXED_ANT)
1828
1829 /*
1830  * Interested readers refer to Rx/Tx MCS Map definition as defined in
1831  * 802.11ac
1832  */
1833 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
1834 #define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
1835 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
1836
1837 enum {
1838         REGDMN_MODE_11A              = 0x00001, /* 11a channels */
1839         REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
1840         REGDMN_MODE_11B              = 0x00004, /* 11b channels */
1841         REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
1842         REGDMN_MODE_11G              = 0x00008, /* XXX historical */
1843         REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
1844         REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
1845         REGDMN_MODE_XR               = 0x00100, /* XR channels */
1846         REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
1847         REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
1848         REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
1849         REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
1850         REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
1851         REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
1852         REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
1853         REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
1854         REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
1855         REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
1856         REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
1857         REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
1858         REGDMN_MODE_ALL              = 0xffffffff
1859 };
1860
1861 #define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
1862 #define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
1863 #define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
1864
1865 /* regulatory capabilities */
1866 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
1867 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
1868 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
1869 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
1870 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
1871 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
1872
1873 struct hal_reg_capabilities {
1874         /* regdomain value specified in EEPROM */
1875         __le32 eeprom_rd;
1876         /*regdomain */
1877         __le32 eeprom_rd_ext;
1878         /* CAP1 capabilities bit map. */
1879         __le32 regcap1;
1880         /* REGDMN EEPROM CAP. */
1881         __le32 regcap2;
1882         /* REGDMN MODE */
1883         __le32 wireless_modes;
1884         __le32 low_2ghz_chan;
1885         __le32 high_2ghz_chan;
1886         __le32 low_5ghz_chan;
1887         __le32 high_5ghz_chan;
1888 } __packed;
1889
1890 enum wlan_mode_capability {
1891         WHAL_WLAN_11A_CAPABILITY   = 0x1,
1892         WHAL_WLAN_11G_CAPABILITY   = 0x2,
1893         WHAL_WLAN_11AG_CAPABILITY  = 0x3,
1894 };
1895
1896 /* structure used by FW for requesting host memory */
1897 struct wlan_host_mem_req {
1898         /* ID of the request */
1899         __le32 req_id;
1900         /* size of the  of each unit */
1901         __le32 unit_size;
1902         /* flags to  indicate that
1903          * the number units is dependent
1904          * on number of resources(num vdevs num peers .. etc)
1905          */
1906         __le32 num_unit_info;
1907         /*
1908          * actual number of units to allocate . if flags in the num_unit_info
1909          * indicate that number of units is tied to number of a particular
1910          * resource to allocate then  num_units filed is set to 0 and host
1911          * will derive the number units from number of the resources it is
1912          * requesting.
1913          */
1914         __le32 num_units;
1915 } __packed;
1916
1917 /*
1918  * The following struct holds optional payload for
1919  * wmi_service_ready_event,e.g., 11ac pass some of the
1920  * device capability to the host.
1921  */
1922 struct wmi_service_ready_event {
1923         __le32 sw_version;
1924         __le32 sw_version_1;
1925         __le32 abi_version;
1926         /* WMI_PHY_CAPABILITY */
1927         __le32 phy_capability;
1928         /* Maximum number of frag table entries that SW will populate less 1 */
1929         __le32 max_frag_entry;
1930         __le32 wmi_service_bitmap[16];
1931         __le32 num_rf_chains;
1932         /*
1933          * The following field is only valid for service type
1934          * WMI_SERVICE_11AC
1935          */
1936         __le32 ht_cap_info; /* WMI HT Capability */
1937         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
1938         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
1939         __le32 hw_min_tx_power;
1940         __le32 hw_max_tx_power;
1941         struct hal_reg_capabilities hal_reg_capabilities;
1942         __le32 sys_cap_info;
1943         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
1944         /*
1945          * Max beacon and Probe Response IE offload size
1946          * (includes optional P2P IEs)
1947          */
1948         __le32 max_bcn_ie_size;
1949         /*
1950          * request to host to allocate a chuck of memory and pss it down to FW
1951          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
1952          * data structures. Only valid for low latency interfaces like PCIE
1953          * where FW can access this memory directly (or) by DMA.
1954          */
1955         __le32 num_mem_reqs;
1956         struct wlan_host_mem_req mem_reqs[0];
1957 } __packed;
1958
1959 /* This is the definition from 10.X firmware branch */
1960 struct wmi_10x_service_ready_event {
1961         __le32 sw_version;
1962         __le32 abi_version;
1963
1964         /* WMI_PHY_CAPABILITY */
1965         __le32 phy_capability;
1966
1967         /* Maximum number of frag table entries that SW will populate less 1 */
1968         __le32 max_frag_entry;
1969         __le32 wmi_service_bitmap[16];
1970         __le32 num_rf_chains;
1971
1972         /*
1973          * The following field is only valid for service type
1974          * WMI_SERVICE_11AC
1975          */
1976         __le32 ht_cap_info; /* WMI HT Capability */
1977         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
1978         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
1979         __le32 hw_min_tx_power;
1980         __le32 hw_max_tx_power;
1981
1982         struct hal_reg_capabilities hal_reg_capabilities;
1983
1984         __le32 sys_cap_info;
1985         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
1986
1987         /*
1988          * request to host to allocate a chuck of memory and pss it down to FW
1989          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
1990          * data structures. Only valid for low latency interfaces like PCIE
1991          * where FW can access this memory directly (or) by DMA.
1992          */
1993         __le32 num_mem_reqs;
1994
1995         struct wlan_host_mem_req mem_reqs[0];
1996 } __packed;
1997
1998 #define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ)
1999 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ)
2000
2001 struct wmi_ready_event {
2002         __le32 sw_version;
2003         __le32 abi_version;
2004         struct wmi_mac_addr mac_addr;
2005         __le32 status;
2006 } __packed;
2007
2008 struct wmi_resource_config {
2009         /* number of virtual devices (VAPs) to support */
2010         __le32 num_vdevs;
2011
2012         /* number of peer nodes to support */
2013         __le32 num_peers;
2014
2015         /*
2016          * In offload mode target supports features like WOW, chatter and
2017          * other protocol offloads. In order to support them some
2018          * functionalities like reorder buffering, PN checking need to be
2019          * done in target. This determines maximum number of peers suported
2020          * by target in offload mode
2021          */
2022         __le32 num_offload_peers;
2023
2024         /* For target-based RX reordering */
2025         __le32 num_offload_reorder_bufs;
2026
2027         /* number of keys per peer */
2028         __le32 num_peer_keys;
2029
2030         /* total number of TX/RX data TIDs */
2031         __le32 num_tids;
2032
2033         /*
2034          * max skid for resolving hash collisions
2035          *
2036          *   The address search table is sparse, so that if two MAC addresses
2037          *   result in the same hash value, the second of these conflicting
2038          *   entries can slide to the next index in the address search table,
2039          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2040          *   specifies the upper bound on how many subsequent indices to search
2041          *   over to find an unoccupied space.
2042          */
2043         __le32 ast_skid_limit;
2044
2045         /*
2046          * the nominal chain mask for transmit
2047          *
2048          *   The chain mask may be modified dynamically, e.g. to operate AP
2049          *   tx with a reduced number of chains if no clients are associated.
2050          *   This configuration parameter specifies the nominal chain-mask that
2051          *   should be used when not operating with a reduced set of tx chains.
2052          */
2053         __le32 tx_chain_mask;
2054
2055         /*
2056          * the nominal chain mask for receive
2057          *
2058          *   The chain mask may be modified dynamically, e.g. for a client
2059          *   to use a reduced number of chains for receive if the traffic to
2060          *   the client is low enough that it doesn't require downlink MIMO
2061          *   or antenna diversity.
2062          *   This configuration parameter specifies the nominal chain-mask that
2063          *   should be used when not operating with a reduced set of rx chains.
2064          */
2065         __le32 rx_chain_mask;
2066
2067         /*
2068          * what rx reorder timeout (ms) to use for the AC
2069          *
2070          *   Each WMM access class (voice, video, best-effort, background) will
2071          *   have its own timeout value to dictate how long to wait for missing
2072          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2073          *   already been received.
2074          *   This parameter specifies the timeout in milliseconds for each
2075          *   class.
2076          */
2077         __le32 rx_timeout_pri_vi;
2078         __le32 rx_timeout_pri_vo;
2079         __le32 rx_timeout_pri_be;
2080         __le32 rx_timeout_pri_bk;
2081
2082         /*
2083          * what mode the rx should decap packets to
2084          *
2085          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2086          *   THis setting also determines the default TX behavior, however TX
2087          *   behavior can be modified on a per VAP basis during VAP init
2088          */
2089         __le32 rx_decap_mode;
2090
2091         /* what is the maximum number of scan requests that can be queued */
2092         __le32 scan_max_pending_reqs;
2093
2094         /* maximum VDEV that could use BMISS offload */
2095         __le32 bmiss_offload_max_vdev;
2096
2097         /* maximum VDEV that could use offload roaming */
2098         __le32 roam_offload_max_vdev;
2099
2100         /* maximum AP profiles that would push to offload roaming */
2101         __le32 roam_offload_max_ap_profiles;
2102
2103         /*
2104          * how many groups to use for mcast->ucast conversion
2105          *
2106          *   The target's WAL maintains a table to hold information regarding
2107          *   which peers belong to a given multicast group, so that if
2108          *   multicast->unicast conversion is enabled, the target can convert
2109          *   multicast tx frames to a series of unicast tx frames, to each
2110          *   peer within the multicast group.
2111              This num_mcast_groups configuration parameter tells the target how
2112          *   many multicast groups to provide storage for within its multicast
2113          *   group membership table.
2114          */
2115         __le32 num_mcast_groups;
2116
2117         /*
2118          * size to alloc for the mcast membership table
2119          *
2120          *   This num_mcast_table_elems configuration parameter tells the
2121          *   target how many peer elements it needs to provide storage for in
2122          *   its multicast group membership table.
2123          *   These multicast group membership table elements are shared by the
2124          *   multicast groups stored within the table.
2125          */
2126         __le32 num_mcast_table_elems;
2127
2128         /*
2129          * whether/how to do multicast->unicast conversion
2130          *
2131          *   This configuration parameter specifies whether the target should
2132          *   perform multicast --> unicast conversion on transmit, and if so,
2133          *   what to do if it finds no entries in its multicast group
2134          *   membership table for the multicast IP address in the tx frame.
2135          *   Configuration value:
2136          *   0 -> Do not perform multicast to unicast conversion.
2137          *   1 -> Convert multicast frames to unicast, if the IP multicast
2138          *        address from the tx frame is found in the multicast group
2139          *        membership table.  If the IP multicast address is not found,
2140          *        drop the frame.
2141          *   2 -> Convert multicast frames to unicast, if the IP multicast
2142          *        address from the tx frame is found in the multicast group
2143          *        membership table.  If the IP multicast address is not found,
2144          *        transmit the frame as multicast.
2145          */
2146         __le32 mcast2ucast_mode;
2147
2148         /*
2149          * how much memory to allocate for a tx PPDU dbg log
2150          *
2151          *   This parameter controls how much memory the target will allocate
2152          *   to store a log of tx PPDU meta-information (how large the PPDU
2153          *   was, when it was sent, whether it was successful, etc.)
2154          */
2155         __le32 tx_dbg_log_size;
2156
2157         /* how many AST entries to be allocated for WDS */
2158         __le32 num_wds_entries;
2159
2160         /*
2161          * MAC DMA burst size, e.g., For target PCI limit can be
2162          * 0 -default, 1 256B
2163          */
2164         __le32 dma_burst_size;
2165
2166         /*
2167          * Fixed delimiters to be inserted after every MPDU to
2168          * account for interface latency to avoid underrun.
2169          */
2170         __le32 mac_aggr_delim;
2171
2172         /*
2173          *   determine whether target is responsible for detecting duplicate
2174          *   non-aggregate MPDU and timing out stale fragments.
2175          *
2176          *   A-MPDU reordering is always performed on the target.
2177          *
2178          *   0: target responsible for frag timeout and dup checking
2179          *   1: host responsible for frag timeout and dup checking
2180          */
2181         __le32 rx_skip_defrag_timeout_dup_detection_check;
2182
2183         /*
2184          * Configuration for VoW :
2185          * No of Video Nodes to be supported
2186          * and Max no of descriptors for each Video link (node).
2187          */
2188         __le32 vow_config;
2189
2190         /* maximum VDEV that could use GTK offload */
2191         __le32 gtk_offload_max_vdev;
2192
2193         /* Number of msdu descriptors target should use */
2194         __le32 num_msdu_desc;
2195
2196         /*
2197          * Max. number of Tx fragments per MSDU
2198          *  This parameter controls the max number of Tx fragments per MSDU.
2199          *  This is sent by the target as part of the WMI_SERVICE_READY event
2200          *  and is overriden by the OS shim as required.
2201          */
2202         __le32 max_frag_entries;
2203 } __packed;
2204
2205 struct wmi_resource_config_10x {
2206         /* number of virtual devices (VAPs) to support */
2207         __le32 num_vdevs;
2208
2209         /* number of peer nodes to support */
2210         __le32 num_peers;
2211
2212         /* number of keys per peer */
2213         __le32 num_peer_keys;
2214
2215         /* total number of TX/RX data TIDs */
2216         __le32 num_tids;
2217
2218         /*
2219          * max skid for resolving hash collisions
2220          *
2221          *   The address search table is sparse, so that if two MAC addresses
2222          *   result in the same hash value, the second of these conflicting
2223          *   entries can slide to the next index in the address search table,
2224          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2225          *   specifies the upper bound on how many subsequent indices to search
2226          *   over to find an unoccupied space.
2227          */
2228         __le32 ast_skid_limit;
2229
2230         /*
2231          * the nominal chain mask for transmit
2232          *
2233          *   The chain mask may be modified dynamically, e.g. to operate AP
2234          *   tx with a reduced number of chains if no clients are associated.
2235          *   This configuration parameter specifies the nominal chain-mask that
2236          *   should be used when not operating with a reduced set of tx chains.
2237          */
2238         __le32 tx_chain_mask;
2239
2240         /*
2241          * the nominal chain mask for receive
2242          *
2243          *   The chain mask may be modified dynamically, e.g. for a client
2244          *   to use a reduced number of chains for receive if the traffic to
2245          *   the client is low enough that it doesn't require downlink MIMO
2246          *   or antenna diversity.
2247          *   This configuration parameter specifies the nominal chain-mask that
2248          *   should be used when not operating with a reduced set of rx chains.
2249          */
2250         __le32 rx_chain_mask;
2251
2252         /*
2253          * what rx reorder timeout (ms) to use for the AC
2254          *
2255          *   Each WMM access class (voice, video, best-effort, background) will
2256          *   have its own timeout value to dictate how long to wait for missing
2257          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2258          *   already been received.
2259          *   This parameter specifies the timeout in milliseconds for each
2260          *   class.
2261          */
2262         __le32 rx_timeout_pri_vi;
2263         __le32 rx_timeout_pri_vo;
2264         __le32 rx_timeout_pri_be;
2265         __le32 rx_timeout_pri_bk;
2266
2267         /*
2268          * what mode the rx should decap packets to
2269          *
2270          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2271          *   THis setting also determines the default TX behavior, however TX
2272          *   behavior can be modified on a per VAP basis during VAP init
2273          */
2274         __le32 rx_decap_mode;
2275
2276         /* what is the maximum number of scan requests that can be queued */
2277         __le32 scan_max_pending_reqs;
2278
2279         /* maximum VDEV that could use BMISS offload */
2280         __le32 bmiss_offload_max_vdev;
2281
2282         /* maximum VDEV that could use offload roaming */
2283         __le32 roam_offload_max_vdev;
2284
2285         /* maximum AP profiles that would push to offload roaming */
2286         __le32 roam_offload_max_ap_profiles;
2287
2288         /*
2289          * how many groups to use for mcast->ucast conversion
2290          *
2291          *   The target's WAL maintains a table to hold information regarding
2292          *   which peers belong to a given multicast group, so that if
2293          *   multicast->unicast conversion is enabled, the target can convert
2294          *   multicast tx frames to a series of unicast tx frames, to each
2295          *   peer within the multicast group.
2296              This num_mcast_groups configuration parameter tells the target how
2297          *   many multicast groups to provide storage for within its multicast
2298          *   group membership table.
2299          */
2300         __le32 num_mcast_groups;
2301
2302         /*
2303          * size to alloc for the mcast membership table
2304          *
2305          *   This num_mcast_table_elems configuration parameter tells the
2306          *   target how many peer elements it needs to provide storage for in
2307          *   its multicast group membership table.
2308          *   These multicast group membership table elements are shared by the
2309          *   multicast groups stored within the table.
2310          */
2311         __le32 num_mcast_table_elems;
2312
2313         /*
2314          * whether/how to do multicast->unicast conversion
2315          *
2316          *   This configuration parameter specifies whether the target should
2317          *   perform multicast --> unicast conversion on transmit, and if so,
2318          *   what to do if it finds no entries in its multicast group
2319          *   membership table for the multicast IP address in the tx frame.
2320          *   Configuration value:
2321          *   0 -> Do not perform multicast to unicast conversion.
2322          *   1 -> Convert multicast frames to unicast, if the IP multicast
2323          *        address from the tx frame is found in the multicast group
2324          *        membership table.  If the IP multicast address is not found,
2325          *        drop the frame.
2326          *   2 -> Convert multicast frames to unicast, if the IP multicast
2327          *        address from the tx frame is found in the multicast group
2328          *        membership table.  If the IP multicast address is not found,
2329          *        transmit the frame as multicast.
2330          */
2331         __le32 mcast2ucast_mode;
2332
2333         /*
2334          * how much memory to allocate for a tx PPDU dbg log
2335          *
2336          *   This parameter controls how much memory the target will allocate
2337          *   to store a log of tx PPDU meta-information (how large the PPDU
2338          *   was, when it was sent, whether it was successful, etc.)
2339          */
2340         __le32 tx_dbg_log_size;
2341
2342         /* how many AST entries to be allocated for WDS */
2343         __le32 num_wds_entries;
2344
2345         /*
2346          * MAC DMA burst size, e.g., For target PCI limit can be
2347          * 0 -default, 1 256B
2348          */
2349         __le32 dma_burst_size;
2350
2351         /*
2352          * Fixed delimiters to be inserted after every MPDU to
2353          * account for interface latency to avoid underrun.
2354          */
2355         __le32 mac_aggr_delim;
2356
2357         /*
2358          *   determine whether target is responsible for detecting duplicate
2359          *   non-aggregate MPDU and timing out stale fragments.
2360          *
2361          *   A-MPDU reordering is always performed on the target.
2362          *
2363          *   0: target responsible for frag timeout and dup checking
2364          *   1: host responsible for frag timeout and dup checking
2365          */
2366         __le32 rx_skip_defrag_timeout_dup_detection_check;
2367
2368         /*
2369          * Configuration for VoW :
2370          * No of Video Nodes to be supported
2371          * and Max no of descriptors for each Video link (node).
2372          */
2373         __le32 vow_config;
2374
2375         /* Number of msdu descriptors target should use */
2376         __le32 num_msdu_desc;
2377
2378         /*
2379          * Max. number of Tx fragments per MSDU
2380          *  This parameter controls the max number of Tx fragments per MSDU.
2381          *  This is sent by the target as part of the WMI_SERVICE_READY event
2382          *  and is overriden by the OS shim as required.
2383          */
2384         __le32 max_frag_entries;
2385 } __packed;
2386
2387 enum wmi_10_2_feature_mask {
2388         WMI_10_2_RX_BATCH_MODE = BIT(0),
2389         WMI_10_2_ATF_CONFIG    = BIT(1),
2390         WMI_10_2_COEX_GPIO     = BIT(3),
2391 };
2392
2393 struct wmi_resource_config_10_2 {
2394         struct wmi_resource_config_10x common;
2395         __le32 max_peer_ext_stats;
2396         __le32 smart_ant_cap; /* 0-disable, 1-enable */
2397         __le32 bk_min_free;
2398         __le32 be_min_free;
2399         __le32 vi_min_free;
2400         __le32 vo_min_free;
2401         __le32 feature_mask;
2402 } __packed;
2403
2404 #define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2405 #define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2406 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2407
2408 struct wmi_resource_config_10_4 {
2409         /* Number of virtual devices (VAPs) to support */
2410         __le32 num_vdevs;
2411
2412         /* Number of peer nodes to support */
2413         __le32 num_peers;
2414
2415         /* Number of active peer nodes to support */
2416         __le32 num_active_peers;
2417
2418         /* In offload mode, target supports features like WOW, chatter and other
2419          * protocol offloads. In order to support them some functionalities like
2420          * reorder buffering, PN checking need to be done in target.
2421          * This determines maximum number of peers supported by target in
2422          * offload mode.
2423          */
2424         __le32 num_offload_peers;
2425
2426         /* Number of reorder buffers available for doing target based reorder
2427          * Rx reorder buffering
2428          */
2429         __le32 num_offload_reorder_buffs;
2430
2431         /* Number of keys per peer */
2432         __le32 num_peer_keys;
2433
2434         /* Total number of TX/RX data TIDs */
2435         __le32 num_tids;
2436
2437         /* Max skid for resolving hash collisions.
2438          * The address search table is sparse, so that if two MAC addresses
2439          * result in the same hash value, the second of these conflicting
2440          * entries can slide to the next index in the address search table,
2441          * and use it, if it is unoccupied.  This ast_skid_limit parameter
2442          * specifies the upper bound on how many subsequent indices to search
2443          * over to find an unoccupied space.
2444          */
2445         __le32 ast_skid_limit;
2446
2447         /* The nominal chain mask for transmit.
2448          * The chain mask may be modified dynamically, e.g. to operate AP tx
2449          * with a reduced number of chains if no clients are associated.
2450          * This configuration parameter specifies the nominal chain-mask that
2451          * should be used when not operating with a reduced set of tx chains.
2452          */
2453         __le32 tx_chain_mask;
2454
2455         /* The nominal chain mask for receive.
2456          * The chain mask may be modified dynamically, e.g. for a client to use
2457          * a reduced number of chains for receive if the traffic to the client
2458          * is low enough that it doesn't require downlink MIMO or antenna
2459          * diversity. This configuration parameter specifies the nominal
2460          * chain-mask that should be used when not operating with a reduced
2461          * set of rx chains.
2462          */
2463         __le32 rx_chain_mask;
2464
2465         /* What rx reorder timeout (ms) to use for the AC.
2466          * Each WMM access class (voice, video, best-effort, background) will
2467          * have its own timeout value to dictate how long to wait for missing
2468          * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2469          * been received. This parameter specifies the timeout in milliseconds
2470          * for each class.
2471          */
2472         __le32 rx_timeout_pri[4];
2473
2474         /* What mode the rx should decap packets to.
2475          * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2476          * This setting also determines the default TX behavior, however TX
2477          * behavior can be modified on a per VAP basis during VAP init
2478          */
2479         __le32 rx_decap_mode;
2480
2481         __le32 scan_max_pending_req;
2482
2483         __le32 bmiss_offload_max_vdev;
2484
2485         __le32 roam_offload_max_vdev;
2486
2487         __le32 roam_offload_max_ap_profiles;
2488
2489         /* How many groups to use for mcast->ucast conversion.
2490          * The target's WAL maintains a table to hold information regarding
2491          * which peers belong to a given multicast group, so that if
2492          * multicast->unicast conversion is enabled, the target can convert
2493          * multicast tx frames to a series of unicast tx frames, to each peer
2494          * within the multicast group. This num_mcast_groups configuration
2495          * parameter tells the target how many multicast groups to provide
2496          * storage for within its multicast group membership table.
2497          */
2498         __le32 num_mcast_groups;
2499
2500         /* Size to alloc for the mcast membership table.
2501          * This num_mcast_table_elems configuration parameter tells the target
2502          * how many peer elements it needs to provide storage for in its
2503          * multicast group membership table. These multicast group membership
2504          * table elements are shared by the multicast groups stored within
2505          * the table.
2506          */
2507         __le32 num_mcast_table_elems;
2508
2509         /* Whether/how to do multicast->unicast conversion.
2510          * This configuration parameter specifies whether the target should
2511          * perform multicast --> unicast conversion on transmit, and if so,
2512          * what to do if it finds no entries in its multicast group membership
2513          * table for the multicast IP address in the tx frame.
2514          * Configuration value:
2515          * 0 -> Do not perform multicast to unicast conversion.
2516          * 1 -> Convert multicast frames to unicast, if the IP multicast address
2517          *      from the tx frame is found in the multicast group membership
2518          *      table.  If the IP multicast address is not found, drop the frame
2519          * 2 -> Convert multicast frames to unicast, if the IP multicast address
2520          *      from the tx frame is found in the multicast group membership
2521          *      table.  If the IP multicast address is not found, transmit the
2522          *      frame as multicast.
2523          */
2524         __le32 mcast2ucast_mode;
2525
2526         /* How much memory to allocate for a tx PPDU dbg log.
2527          * This parameter controls how much memory the target will allocate to
2528          * store a log of tx PPDU meta-information (how large the PPDU was,
2529          * when it was sent, whether it was successful, etc.)
2530          */
2531         __le32 tx_dbg_log_size;
2532
2533         /* How many AST entries to be allocated for WDS */
2534         __le32 num_wds_entries;
2535
2536         /* MAC DMA burst size. 0 -default, 1 -256B */
2537         __le32 dma_burst_size;
2538
2539         /* Fixed delimiters to be inserted after every MPDU to account for
2540          * interface latency to avoid underrun.
2541          */
2542         __le32 mac_aggr_delim;
2543
2544         /* Determine whether target is responsible for detecting duplicate
2545          * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2546          * is always performed on the target.
2547          *
2548          * 0: target responsible for frag timeout and dup checking
2549          * 1: host responsible for frag timeout and dup checking
2550          */
2551         __le32 rx_skip_defrag_timeout_dup_detection_check;
2552
2553         /* Configuration for VoW : No of Video nodes to be supported and max
2554          * no of descriptors for each video link (node).
2555          */
2556         __le32 vow_config;
2557
2558         /* Maximum vdev that could use gtk offload */
2559         __le32 gtk_offload_max_vdev;
2560
2561         /* Number of msdu descriptors target should use */
2562         __le32 num_msdu_desc;
2563
2564         /* Max number of tx fragments per MSDU.
2565          * This parameter controls the max number of tx fragments per MSDU.
2566          * This will passed by target as part of the WMI_SERVICE_READY event
2567          * and is overridden by the OS shim as required.
2568          */
2569         __le32 max_frag_entries;
2570
2571         /* Max number of extended peer stats.
2572          * This parameter controls the max number of peers for which extended
2573          * statistics are supported by target
2574          */
2575         __le32 max_peer_ext_stats;
2576
2577         /* Smart antenna capabilities information.
2578          * 1 - Smart antenna is enabled
2579          * 0 - Smart antenna is disabled
2580          * In future this can contain smart antenna specific capabilities.
2581          */
2582         __le32 smart_ant_cap;
2583
2584         /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2585          * during init.
2586          */
2587         __le32 bk_minfree;
2588         __le32 be_minfree;
2589         __le32 vi_minfree;
2590         __le32 vo_minfree;
2591
2592         /* Rx batch mode capability.
2593          * 1 - Rx batch mode enabled
2594          * 0 - Rx batch mode disabled
2595          */
2596         __le32 rx_batchmode;
2597
2598         /* Thermal throttling capability.
2599          * 1 - Capable of thermal throttling
2600          * 0 - Not capable of thermal throttling
2601          */
2602         __le32 tt_support;
2603
2604         /* ATF configuration.
2605          * 1  - Enable ATF
2606          * 0  - Disable ATF
2607          */
2608         __le32 atf_config;
2609
2610         /* Configure padding to manage IP header un-alignment
2611          * 1  - Enable padding
2612          * 0  - Disable padding
2613          */
2614         __le32 iphdr_pad_config;
2615
2616         /* qwrap configuration
2617          * 1  - This is qwrap configuration
2618          * 0  - This is not qwrap
2619          */
2620         __le32 qwrap_config;
2621 } __packed;
2622
2623 /* strucutre describing host memory chunk. */
2624 struct host_memory_chunk {
2625         /* id of the request that is passed up in service ready */
2626         __le32 req_id;
2627         /* the physical address the memory chunk */
2628         __le32 ptr;
2629         /* size of the chunk */
2630         __le32 size;
2631 } __packed;
2632
2633 struct wmi_host_mem_chunks {
2634         __le32 count;
2635         /* some fw revisions require at least 1 chunk regardless of count */
2636         struct host_memory_chunk items[1];
2637 } __packed;
2638
2639 struct wmi_init_cmd {
2640         struct wmi_resource_config resource_config;
2641         struct wmi_host_mem_chunks mem_chunks;
2642 } __packed;
2643
2644 /* _10x stucture is from 10.X FW API */
2645 struct wmi_init_cmd_10x {
2646         struct wmi_resource_config_10x resource_config;
2647         struct wmi_host_mem_chunks mem_chunks;
2648 } __packed;
2649
2650 struct wmi_init_cmd_10_2 {
2651         struct wmi_resource_config_10_2 resource_config;
2652         struct wmi_host_mem_chunks mem_chunks;
2653 } __packed;
2654
2655 struct wmi_init_cmd_10_4 {
2656         struct wmi_resource_config_10_4 resource_config;
2657         struct wmi_host_mem_chunks mem_chunks;
2658 } __packed;
2659
2660 struct wmi_chan_list_entry {
2661         __le16 freq;
2662         u8 phy_mode; /* valid for 10.2 only */
2663         u8 reserved;
2664 } __packed;
2665
2666 /* TLV for channel list */
2667 struct wmi_chan_list {
2668         __le32 tag; /* WMI_CHAN_LIST_TAG */
2669         __le32 num_chan;
2670         struct wmi_chan_list_entry channel_list[0];
2671 } __packed;
2672
2673 struct wmi_bssid_list {
2674         __le32 tag; /* WMI_BSSID_LIST_TAG */
2675         __le32 num_bssid;
2676         struct wmi_mac_addr bssid_list[0];
2677 } __packed;
2678
2679 struct wmi_ie_data {
2680         __le32 tag; /* WMI_IE_TAG */
2681         __le32 ie_len;
2682         u8 ie_data[0];
2683 } __packed;
2684
2685 struct wmi_ssid {
2686         __le32 ssid_len;
2687         u8 ssid[32];
2688 } __packed;
2689
2690 struct wmi_ssid_list {
2691         __le32 tag; /* WMI_SSID_LIST_TAG */
2692         __le32 num_ssids;
2693         struct wmi_ssid ssids[0];
2694 } __packed;
2695
2696 /* prefix used by scan requestor ids on the host */
2697 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
2698
2699 /* prefix used by scan request ids generated on the host */
2700 /* host cycles through the lower 12 bits to generate ids */
2701 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
2702
2703 #define WLAN_SCAN_PARAMS_MAX_SSID    16
2704 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
2705 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
2706
2707 /* Values lower than this may be refused by some firmware revisions with a scan
2708  * completion with a timedout reason.
2709  */
2710 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
2711
2712 /* Scan priority numbers must be sequential, starting with 0 */
2713 enum wmi_scan_priority {
2714         WMI_SCAN_PRIORITY_VERY_LOW = 0,
2715         WMI_SCAN_PRIORITY_LOW,
2716         WMI_SCAN_PRIORITY_MEDIUM,
2717         WMI_SCAN_PRIORITY_HIGH,
2718         WMI_SCAN_PRIORITY_VERY_HIGH,
2719         WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
2720 };
2721
2722 struct wmi_start_scan_common {
2723         /* Scan ID */
2724         __le32 scan_id;
2725         /* Scan requestor ID */
2726         __le32 scan_req_id;
2727         /* VDEV id(interface) that is requesting scan */
2728         __le32 vdev_id;
2729         /* Scan Priority, input to scan scheduler */
2730         __le32 scan_priority;
2731         /* Scan events subscription */
2732         __le32 notify_scan_events;
2733         /* dwell time in msec on active channels */
2734         __le32 dwell_time_active;
2735         /* dwell time in msec on passive channels */
2736         __le32 dwell_time_passive;
2737         /*
2738          * min time in msec on the BSS channel,only valid if atleast one
2739          * VDEV is active
2740          */
2741         __le32 min_rest_time;
2742         /*
2743          * max rest time in msec on the BSS channel,only valid if at least
2744          * one VDEV is active
2745          */
2746         /*
2747          * the scanner will rest on the bss channel at least min_rest_time
2748          * after min_rest_time the scanner will start checking for tx/rx
2749          * activity on all VDEVs. if there is no activity the scanner will
2750          * switch to off channel. if there is activity the scanner will let
2751          * the radio on the bss channel until max_rest_time expires.at
2752          * max_rest_time scanner will switch to off channel irrespective of
2753          * activity. activity is determined by the idle_time parameter.
2754          */
2755         __le32 max_rest_time;
2756         /*
2757          * time before sending next set of probe requests.
2758          * The scanner keeps repeating probe requests transmission with
2759          * period specified by repeat_probe_time.
2760          * The number of probe requests specified depends on the ssid_list
2761          * and bssid_list
2762          */
2763         __le32 repeat_probe_time;
2764         /* time in msec between 2 consequetive probe requests with in a set. */
2765         __le32 probe_spacing_time;
2766         /*
2767          * data inactivity time in msec on bss channel that will be used by
2768          * scanner for measuring the inactivity.
2769          */
2770         __le32 idle_time;
2771         /* maximum time in msec allowed for scan  */
2772         __le32 max_scan_time;
2773         /*
2774          * delay in msec before sending first probe request after switching
2775          * to a channel
2776          */
2777         __le32 probe_delay;
2778         /* Scan control flags */
2779         __le32 scan_ctrl_flags;
2780 } __packed;
2781
2782 struct wmi_start_scan_tlvs {
2783         /* TLV parameters. These includes channel list, ssid list, bssid list,
2784          * extra ies.
2785          */
2786         u8 tlvs[0];
2787 } __packed;
2788
2789 struct wmi_start_scan_cmd {
2790         struct wmi_start_scan_common common;
2791         __le32 burst_duration_ms;
2792         struct wmi_start_scan_tlvs tlvs;
2793 } __packed;
2794
2795 /* This is the definition from 10.X firmware branch */
2796 struct wmi_10x_start_scan_cmd {
2797         struct wmi_start_scan_common common;
2798         struct wmi_start_scan_tlvs tlvs;
2799 } __packed;
2800
2801 struct wmi_ssid_arg {
2802         int len;
2803         const u8 *ssid;
2804 };
2805
2806 struct wmi_bssid_arg {
2807         const u8 *bssid;
2808 };
2809
2810 struct wmi_start_scan_arg {
2811         u32 scan_id;
2812         u32 scan_req_id;
2813         u32 vdev_id;
2814         u32 scan_priority;
2815         u32 notify_scan_events;
2816         u32 dwell_time_active;
2817         u32 dwell_time_passive;
2818         u32 min_rest_time;
2819         u32 max_rest_time;
2820         u32 repeat_probe_time;
2821         u32 probe_spacing_time;
2822         u32 idle_time;
2823         u32 max_scan_time;
2824         u32 probe_delay;
2825         u32 scan_ctrl_flags;
2826         u32 burst_duration_ms;
2827
2828         u32 ie_len;
2829         u32 n_channels;
2830         u32 n_ssids;
2831         u32 n_bssids;
2832
2833         u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
2834         u16 channels[64];
2835         struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
2836         struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
2837 };
2838
2839 /* scan control flags */
2840
2841 /* passively scan all channels including active channels */
2842 #define WMI_SCAN_FLAG_PASSIVE        0x1
2843 /* add wild card ssid probe request even though ssid_list is specified. */
2844 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
2845 /* add cck rates to rates/xrate ie for the generated probe request */
2846 #define WMI_SCAN_ADD_CCK_RATES 0x4
2847 /* add ofdm rates to rates/xrate ie for the generated probe request */
2848 #define WMI_SCAN_ADD_OFDM_RATES 0x8
2849 /* To enable indication of Chan load and Noise floor to host */
2850 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
2851 /* Filter Probe request frames  */
2852 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
2853 /* When set, DFS channels will not be scanned */
2854 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
2855 /* Different FW scan engine may choose to bail out on errors.
2856  * Allow the driver to have influence over that. */
2857 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
2858
2859 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
2860 #define WMI_SCAN_CLASS_MASK 0xFF000000
2861
2862 enum wmi_stop_scan_type {
2863         WMI_SCAN_STOP_ONE       = 0x00000000, /* stop by scan_id */
2864         WMI_SCAN_STOP_VDEV_ALL  = 0x01000000, /* stop by vdev_id */
2865         WMI_SCAN_STOP_ALL       = 0x04000000, /* stop all scans */
2866 };
2867
2868 struct wmi_stop_scan_cmd {
2869         __le32 scan_req_id;
2870         __le32 scan_id;
2871         __le32 req_type;
2872         __le32 vdev_id;
2873 } __packed;
2874
2875 struct wmi_stop_scan_arg {
2876         u32 req_id;
2877         enum wmi_stop_scan_type req_type;
2878         union {
2879                 u32 scan_id;
2880                 u32 vdev_id;
2881         } u;
2882 };
2883
2884 struct wmi_scan_chan_list_cmd {
2885         __le32 num_scan_chans;
2886         struct wmi_channel chan_info[0];
2887 } __packed;
2888
2889 struct wmi_scan_chan_list_arg {
2890         u32 n_channels;
2891         struct wmi_channel_arg *channels;
2892 };
2893
2894 enum wmi_bss_filter {
2895         WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
2896         WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
2897         WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
2898         WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
2899         WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
2900         WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
2901         WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
2902         WMI_BSS_FILTER_LAST_BSS,        /* marker only */
2903 };
2904
2905 enum wmi_scan_event_type {
2906         WMI_SCAN_EVENT_STARTED              = BIT(0),
2907         WMI_SCAN_EVENT_COMPLETED            = BIT(1),
2908         WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
2909         WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
2910         WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
2911         /* possibly by high-prio scan */
2912         WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
2913         WMI_SCAN_EVENT_START_FAILED         = BIT(6),
2914         WMI_SCAN_EVENT_RESTARTED            = BIT(7),
2915         WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
2916         WMI_SCAN_EVENT_MAX                  = BIT(15),
2917 };
2918
2919 enum wmi_scan_completion_reason {
2920         WMI_SCAN_REASON_COMPLETED,
2921         WMI_SCAN_REASON_CANCELLED,
2922         WMI_SCAN_REASON_PREEMPTED,
2923         WMI_SCAN_REASON_TIMEDOUT,
2924         WMI_SCAN_REASON_INTERNAL_FAILURE,
2925         WMI_SCAN_REASON_MAX,
2926 };
2927
2928 struct wmi_scan_event {
2929         __le32 event_type; /* %WMI_SCAN_EVENT_ */
2930         __le32 reason; /* %WMI_SCAN_REASON_ */
2931         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
2932         __le32 scan_req_id;
2933         __le32 scan_id;
2934         __le32 vdev_id;
2935 } __packed;
2936
2937 /*
2938  * This defines how much headroom is kept in the
2939  * receive frame between the descriptor and the
2940  * payload, in order for the WMI PHY error and
2941  * management handler to insert header contents.
2942  *
2943  * This is in bytes.
2944  */
2945 #define WMI_MGMT_RX_HDR_HEADROOM    52
2946
2947 /*
2948  * This event will be used for sending scan results
2949  * as well as rx mgmt frames to the host. The rx buffer
2950  * will be sent as part of this WMI event. It would be a
2951  * good idea to pass all the fields in the RX status
2952  * descriptor up to the host.
2953  */
2954 struct wmi_mgmt_rx_hdr_v1 {
2955         __le32 channel;
2956         __le32 snr;
2957         __le32 rate;
2958         __le32 phy_mode;
2959         __le32 buf_len;
2960         __le32 status; /* %WMI_RX_STATUS_ */
2961 } __packed;
2962
2963 struct wmi_mgmt_rx_hdr_v2 {
2964         struct wmi_mgmt_rx_hdr_v1 v1;
2965         __le32 rssi_ctl[4];
2966 } __packed;
2967
2968 struct wmi_mgmt_rx_event_v1 {
2969         struct wmi_mgmt_rx_hdr_v1 hdr;
2970         u8 buf[0];
2971 } __packed;
2972
2973 struct wmi_mgmt_rx_event_v2 {
2974         struct wmi_mgmt_rx_hdr_v2 hdr;
2975         u8 buf[0];
2976 } __packed;
2977
2978 struct wmi_10_4_mgmt_rx_hdr {
2979         __le32 channel;
2980         __le32 snr;
2981             u8 rssi_ctl[4];
2982         __le32 rate;
2983         __le32 phy_mode;
2984         __le32 buf_len;
2985         __le32 status;
2986 } __packed;
2987
2988 struct wmi_10_4_mgmt_rx_event {
2989         struct wmi_10_4_mgmt_rx_hdr hdr;
2990         u8 buf[0];
2991 } __packed;
2992
2993 #define WMI_RX_STATUS_OK                        0x00
2994 #define WMI_RX_STATUS_ERR_CRC                   0x01
2995 #define WMI_RX_STATUS_ERR_DECRYPT               0x08
2996 #define WMI_RX_STATUS_ERR_MIC                   0x10
2997 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS        0x20
2998
2999 #define PHY_ERROR_GEN_SPECTRAL_SCAN             0x26
3000 #define PHY_ERROR_GEN_FALSE_RADAR_EXT           0x24
3001 #define PHY_ERROR_GEN_RADAR                     0x05
3002
3003 #define PHY_ERROR_10_4_RADAR_MASK               0x4
3004 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3005
3006 enum phy_err_type {
3007         PHY_ERROR_UNKNOWN,
3008         PHY_ERROR_SPECTRAL_SCAN,
3009         PHY_ERROR_FALSE_RADAR_EXT,
3010         PHY_ERROR_RADAR
3011 };
3012
3013 struct wmi_phyerr {
3014         __le32 tsf_timestamp;
3015         __le16 freq1;
3016         __le16 freq2;
3017         u8 rssi_combined;
3018         u8 chan_width_mhz;
3019         u8 phy_err_code;
3020         u8 rsvd0;
3021         __le32 rssi_chains[4];
3022         __le16 nf_chains[4];
3023         __le32 buf_len;
3024         u8 buf[0];
3025 } __packed;
3026
3027 struct wmi_phyerr_event {
3028         __le32 num_phyerrs;
3029         __le32 tsf_l32;
3030         __le32 tsf_u32;
3031         struct wmi_phyerr phyerrs[0];
3032 } __packed;
3033
3034 struct wmi_10_4_phyerr_event {
3035         __le32 tsf_l32;
3036         __le32 tsf_u32;
3037         __le16 freq1;
3038         __le16 freq2;
3039         u8 rssi_combined;
3040         u8 chan_width_mhz;
3041         u8 phy_err_code;
3042         u8 rsvd0;
3043         __le32 rssi_chains[4];
3044         __le16 nf_chains[4];
3045         __le32 phy_err_mask[2];
3046         __le32 tsf_timestamp;
3047         __le32 buf_len;
3048         u8 buf[0];
3049 } __packed;
3050
3051 #define PHYERR_TLV_SIG                          0xBB
3052 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT        0xFB
3053 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY      0xF8
3054 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT  0xF9
3055
3056 struct phyerr_radar_report {
3057         __le32 reg0; /* RADAR_REPORT_REG0_* */
3058         __le32 reg1; /* REDAR_REPORT_REG1_* */
3059 } __packed;
3060
3061 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK           0x80000000
3062 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB            31
3063
3064 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK       0x40000000
3065 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB        30
3066
3067 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK           0x3FF00000
3068 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB            20
3069
3070 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK         0x000F0000
3071 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB          16
3072
3073 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK         0x0000FC00
3074 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB          10
3075
3076 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK               0x000003FF
3077 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB                0
3078
3079 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK     0x80000000
3080 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB      31
3081
3082 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK        0x7F000000
3083 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB         24
3084
3085 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK       0x00FF0000
3086 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB        16
3087
3088 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK         0x0000FF00
3089 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB          8
3090
3091 #define RADAR_REPORT_REG1_PULSE_DUR_MASK                0x000000FF
3092 #define RADAR_REPORT_REG1_PULSE_DUR_LSB                 0
3093
3094 struct phyerr_fft_report {
3095         __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3096         __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3097 } __packed;
3098
3099 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK       0xFF800000
3100 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB        23
3101
3102 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK         0x007FC000
3103 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB          14
3104
3105 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK         0x00003000
3106 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB          12
3107
3108 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK           0x00000FFF
3109 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB            0
3110
3111 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK           0xFC000000
3112 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB            26
3113
3114 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK           0x03FC0000
3115 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB            18
3116
3117 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK            0x0003FF00
3118 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB             8
3119
3120 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK     0x000000FF
3121 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB      0
3122
3123 struct phyerr_tlv {
3124         __le16 len;
3125         u8 tag;
3126         u8 sig;
3127 } __packed;
3128
3129 #define DFS_RSSI_POSSIBLY_FALSE                 50
3130 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE       40
3131
3132 struct wmi_mgmt_tx_hdr {
3133         __le32 vdev_id;
3134         struct wmi_mac_addr peer_macaddr;
3135         __le32 tx_rate;
3136         __le32 tx_power;
3137         __le32 buf_len;
3138 } __packed;
3139
3140 struct wmi_mgmt_tx_cmd {
3141         struct wmi_mgmt_tx_hdr hdr;
3142         u8 buf[0];
3143 } __packed;
3144
3145 struct wmi_echo_event {
3146         __le32 value;
3147 } __packed;
3148
3149 struct wmi_echo_cmd {
3150         __le32 value;
3151 } __packed;
3152
3153 struct wmi_pdev_set_regdomain_cmd {
3154         __le32 reg_domain;
3155         __le32 reg_domain_2G;
3156         __le32 reg_domain_5G;
3157         __le32 conformance_test_limit_2G;
3158         __le32 conformance_test_limit_5G;
3159 } __packed;
3160
3161 enum wmi_dfs_region {
3162         /* Uninitialized dfs domain */
3163         WMI_UNINIT_DFS_DOMAIN = 0,
3164
3165         /* FCC3 dfs domain */
3166         WMI_FCC_DFS_DOMAIN = 1,
3167
3168         /* ETSI dfs domain */
3169         WMI_ETSI_DFS_DOMAIN = 2,
3170
3171         /*Japan dfs domain */
3172         WMI_MKK4_DFS_DOMAIN = 3,
3173 };
3174
3175 struct wmi_pdev_set_regdomain_cmd_10x {
3176         __le32 reg_domain;
3177         __le32 reg_domain_2G;
3178         __le32 reg_domain_5G;
3179         __le32 conformance_test_limit_2G;
3180         __le32 conformance_test_limit_5G;
3181
3182         /* dfs domain from wmi_dfs_region */
3183         __le32 dfs_domain;
3184 } __packed;
3185
3186 /* Command to set/unset chip in quiet mode */
3187 struct wmi_pdev_set_quiet_cmd {
3188         /* period in TUs */
3189         __le32 period;
3190
3191         /* duration in TUs */
3192         __le32 duration;
3193
3194         /* offset in TUs */
3195         __le32 next_start;
3196
3197         /* enable/disable */
3198         __le32 enabled;
3199 } __packed;
3200
3201 /*
3202  * 802.11g protection mode.
3203  */
3204 enum ath10k_protmode {
3205         ATH10K_PROT_NONE     = 0,    /* no protection */
3206         ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3207         ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3208 };
3209
3210 enum wmi_rtscts_profile {
3211         WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3212         WMI_RTSCTS_FOR_SECOND_RATESERIES,
3213         WMI_RTSCTS_ACROSS_SW_RETRIES
3214 };
3215
3216 #define WMI_RTSCTS_ENABLED              1
3217 #define WMI_RTSCTS_SET_MASK             0x0f
3218 #define WMI_RTSCTS_SET_LSB              0
3219
3220 #define WMI_RTSCTS_PROFILE_MASK         0xf0
3221 #define WMI_RTSCTS_PROFILE_LSB          4
3222
3223 enum wmi_beacon_gen_mode {
3224         WMI_BEACON_STAGGERED_MODE = 0,
3225         WMI_BEACON_BURST_MODE = 1
3226 };
3227
3228 enum wmi_csa_event_ies_present_flag {
3229         WMI_CSA_IE_PRESENT = 0x00000001,
3230         WMI_XCSA_IE_PRESENT = 0x00000002,
3231         WMI_WBW_IE_PRESENT = 0x00000004,
3232         WMI_CSWARP_IE_PRESENT = 0x00000008,
3233 };
3234
3235 /* wmi CSA receive event from beacon frame */
3236 struct wmi_csa_event {
3237         __le32 i_fc_dur;
3238         /* Bit 0-15: FC */
3239         /* Bit 16-31: DUR */
3240         struct wmi_mac_addr i_addr1;
3241         struct wmi_mac_addr i_addr2;
3242         __le32 csa_ie[2];
3243         __le32 xcsa_ie[2];
3244         __le32 wb_ie[2];
3245         __le32 cswarp_ie;
3246         __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3247 } __packed;
3248
3249 /* the definition of different PDEV parameters */
3250 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3251 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3252 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3253
3254 struct wmi_pdev_param_map {
3255         u32 tx_chain_mask;
3256         u32 rx_chain_mask;
3257         u32 txpower_limit2g;
3258         u32 txpower_limit5g;
3259         u32 txpower_scale;
3260         u32 beacon_gen_mode;
3261         u32 beacon_tx_mode;
3262         u32 resmgr_offchan_mode;
3263         u32 protection_mode;
3264         u32 dynamic_bw;
3265         u32 non_agg_sw_retry_th;
3266         u32 agg_sw_retry_th;
3267         u32 sta_kickout_th;
3268         u32 ac_aggrsize_scaling;
3269         u32 ltr_enable;
3270         u32 ltr_ac_latency_be;
3271         u32 ltr_ac_latency_bk;
3272         u32 ltr_ac_latency_vi;
3273         u32 ltr_ac_latency_vo;
3274         u32 ltr_ac_latency_timeout;
3275         u32 ltr_sleep_override;
3276         u32 ltr_rx_override;
3277         u32 ltr_tx_activity_timeout;
3278         u32 l1ss_enable;
3279         u32 dsleep_enable;
3280         u32 pcielp_txbuf_flush;
3281         u32 pcielp_txbuf_watermark;
3282         u32 pcielp_txbuf_tmo_en;
3283         u32 pcielp_txbuf_tmo_value;
3284         u32 pdev_stats_update_period;
3285         u32 vdev_stats_update_period;
3286         u32 peer_stats_update_period;
3287         u32 bcnflt_stats_update_period;
3288         u32 pmf_qos;
3289         u32 arp_ac_override;
3290         u32 dcs;
3291         u32 ani_enable;
3292         u32 ani_poll_period;
3293         u32 ani_listen_period;
3294         u32 ani_ofdm_level;
3295         u32 ani_cck_level;
3296         u32 dyntxchain;
3297         u32 proxy_sta;
3298         u32 idle_ps_config;
3299         u32 power_gating_sleep;
3300         u32 fast_channel_reset;
3301         u32 burst_dur;
3302         u32 burst_enable;
3303         u32 cal_period;
3304         u32 aggr_burst;
3305         u32 rx_decap_mode;
3306         u32 smart_antenna_default_antenna;
3307         u32 igmpmld_override;
3308         u32 igmpmld_tid;
3309         u32 antenna_gain;
3310         u32 rx_filter;
3311         u32 set_mcast_to_ucast_tid;
3312         u32 proxy_sta_mode;
3313         u32 set_mcast2ucast_mode;
3314         u32 set_mcast2ucast_buffer;
3315         u32 remove_mcast2ucast_buffer;
3316         u32 peer_sta_ps_statechg_enable;
3317         u32 igmpmld_ac_override;
3318         u32 block_interbss;
3319         u32 set_disable_reset_cmdid;
3320         u32 set_msdu_ttl_cmdid;
3321         u32 set_ppdu_duration_cmdid;
3322         u32 txbf_sound_period_cmdid;
3323         u32 set_promisc_mode_cmdid;
3324         u32 set_burst_mode_cmdid;
3325         u32 en_stats;
3326         u32 mu_group_policy;
3327         u32 noise_detection;
3328         u32 noise_threshold;
3329         u32 dpd_enable;
3330         u32 set_mcast_bcast_echo;
3331         u32 atf_strict_sch;
3332         u32 atf_sched_duration;
3333         u32 ant_plzn;
3334         u32 mgmt_retry_limit;
3335         u32 sensitivity_level;
3336         u32 signed_txpower_2g;
3337         u32 signed_txpower_5g;
3338         u32 enable_per_tid_amsdu;
3339         u32 enable_per_tid_ampdu;
3340         u32 cca_threshold;
3341         u32 rts_fixed_rate;
3342         u32 pdev_reset;
3343         u32 wapi_mbssid_offset;
3344         u32 arp_srcaddr;
3345         u32 arp_dstaddr;
3346 };
3347
3348 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3349
3350 enum wmi_pdev_param {
3351         /* TX chain mask */
3352         WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3353         /* RX chain mask */
3354         WMI_PDEV_PARAM_RX_CHAIN_MASK,
3355         /* TX power limit for 2G Radio */
3356         WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3357         /* TX power limit for 5G Radio */
3358         WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3359         /* TX power scale */
3360         WMI_PDEV_PARAM_TXPOWER_SCALE,
3361         /* Beacon generation mode . 0: host, 1: target   */
3362         WMI_PDEV_PARAM_BEACON_GEN_MODE,
3363         /* Beacon generation mode . 0: staggered 1: bursted   */
3364         WMI_PDEV_PARAM_BEACON_TX_MODE,
3365         /*
3366          * Resource manager off chan mode .
3367          * 0: turn off off chan mode. 1: turn on offchan mode
3368          */
3369         WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3370         /*
3371          * Protection mode:
3372          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3373          */
3374         WMI_PDEV_PARAM_PROTECTION_MODE,
3375         /*
3376          * Dynamic bandwidth - 0: disable, 1: enable
3377          *
3378          * When enabled HW rate control tries different bandwidths when
3379          * retransmitting frames.
3380          */
3381         WMI_PDEV_PARAM_DYNAMIC_BW,
3382         /* Non aggregrate/ 11g sw retry threshold.0-disable */
3383         WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3384         /* aggregrate sw retry threshold. 0-disable*/
3385         WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3386         /* Station kickout threshold (non of consecutive failures).0-disable */
3387         WMI_PDEV_PARAM_STA_KICKOUT_TH,
3388         /* Aggerate size scaling configuration per AC */
3389         WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3390         /* LTR enable */
3391         WMI_PDEV_PARAM_LTR_ENABLE,
3392         /* LTR latency for BE, in us */
3393         WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3394         /* LTR latency for BK, in us */
3395         WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3396         /* LTR latency for VI, in us */
3397         WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3398         /* LTR latency for VO, in us  */
3399         WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3400         /* LTR AC latency timeout, in ms */
3401         WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3402         /* LTR platform latency override, in us */
3403         WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3404         /* LTR-RX override, in us */
3405         WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3406         /* Tx activity timeout for LTR, in us */
3407         WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3408         /* L1SS state machine enable */
3409         WMI_PDEV_PARAM_L1SS_ENABLE,
3410         /* Deep sleep state machine enable */
3411         WMI_PDEV_PARAM_DSLEEP_ENABLE,
3412         /* RX buffering flush enable */
3413         WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3414         /* RX buffering matermark */
3415         WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3416         /* RX buffering timeout enable */
3417         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3418         /* RX buffering timeout value */
3419         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3420         /* pdev level stats update period in ms */
3421         WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3422         /* vdev level stats update period in ms */
3423         WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3424         /* peer level stats update period in ms */
3425         WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3426         /* beacon filter status update period */
3427         WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3428         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3429         WMI_PDEV_PARAM_PMF_QOS,
3430         /* Access category on which ARP frames are sent */
3431         WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3432         /* DCS configuration */
3433         WMI_PDEV_PARAM_DCS,
3434         /* Enable/Disable ANI on target */
3435         WMI_PDEV_PARAM_ANI_ENABLE,
3436         /* configure the ANI polling period */
3437         WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3438         /* configure the ANI listening period */
3439         WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3440         /* configure OFDM immunity level */
3441         WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3442         /* configure CCK immunity level */
3443         WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3444         /* Enable/Disable CDD for 1x1 STAs in rate control module */
3445         WMI_PDEV_PARAM_DYNTXCHAIN,
3446         /* Enable/Disable proxy STA */
3447         WMI_PDEV_PARAM_PROXY_STA,
3448         /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3449         WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3450         /* Enable/Disable power gating sleep */
3451         WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3452 };
3453
3454 enum wmi_10x_pdev_param {
3455         /* TX chian mask */
3456         WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3457         /* RX chian mask */
3458         WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3459         /* TX power limit for 2G Radio */
3460         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3461         /* TX power limit for 5G Radio */
3462         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3463         /* TX power scale */
3464         WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3465         /* Beacon generation mode . 0: host, 1: target   */
3466         WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3467         /* Beacon generation mode . 0: staggered 1: bursted   */
3468         WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3469         /*
3470          * Resource manager off chan mode .
3471          * 0: turn off off chan mode. 1: turn on offchan mode
3472          */
3473         WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3474         /*
3475          * Protection mode:
3476          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3477          */
3478         WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3479         /* Dynamic bandwidth 0: disable 1: enable */
3480         WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3481         /* Non aggregrate/ 11g sw retry threshold.0-disable */
3482         WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3483         /* aggregrate sw retry threshold. 0-disable*/
3484         WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3485         /* Station kickout threshold (non of consecutive failures).0-disable */
3486         WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3487         /* Aggerate size scaling configuration per AC */
3488         WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3489         /* LTR enable */
3490         WMI_10X_PDEV_PARAM_LTR_ENABLE,
3491         /* LTR latency for BE, in us */
3492         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3493         /* LTR latency for BK, in us */
3494         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3495         /* LTR latency for VI, in us */
3496         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3497         /* LTR latency for VO, in us  */
3498         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3499         /* LTR AC latency timeout, in ms */
3500         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3501         /* LTR platform latency override, in us */
3502         WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3503         /* LTR-RX override, in us */
3504         WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3505         /* Tx activity timeout for LTR, in us */
3506         WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3507         /* L1SS state machine enable */
3508         WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3509         /* Deep sleep state machine enable */
3510         WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3511         /* pdev level stats update period in ms */
3512         WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3513         /* vdev level stats update period in ms */
3514         WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3515         /* peer level stats update period in ms */
3516         WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3517         /* beacon filter status update period */
3518         WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3519         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3520         WMI_10X_PDEV_PARAM_PMF_QOS,
3521         /* Access category on which ARP and DHCP frames are sent */
3522         WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3523         /* DCS configuration */
3524         WMI_10X_PDEV_PARAM_DCS,
3525         /* Enable/Disable ANI on target */
3526         WMI_10X_PDEV_PARAM_ANI_ENABLE,
3527         /* configure the ANI polling period */
3528         WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
3529         /* configure the ANI listening period */
3530         WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
3531         /* configure OFDM immunity level */
3532         WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
3533         /* configure CCK immunity level */
3534         WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
3535         /* Enable/Disable CDD for 1x1 STAs in rate control module */
3536         WMI_10X_PDEV_PARAM_DYNTXCHAIN,
3537         /* Enable/Disable Fast channel reset*/
3538         WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
3539         /* Set Bursting DUR */
3540         WMI_10X_PDEV_PARAM_BURST_DUR,
3541         /* Set Bursting Enable*/
3542         WMI_10X_PDEV_PARAM_BURST_ENABLE,
3543
3544         /* following are available as of firmware 10.2 */
3545         WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3546         WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
3547         WMI_10X_PDEV_PARAM_IGMPMLD_TID,
3548         WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
3549         WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
3550         WMI_10X_PDEV_PARAM_RX_FILTER,
3551         WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
3552         WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
3553         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3554         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3555         WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3556         WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
3557         WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
3558         WMI_10X_PDEV_PARAM_CAL_PERIOD
3559 };
3560
3561 enum wmi_10_4_pdev_param {
3562         WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3563         WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
3564         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
3565         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
3566         WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
3567         WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
3568         WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
3569         WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3570         WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
3571         WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
3572         WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3573         WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
3574         WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
3575         WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3576         WMI_10_4_PDEV_PARAM_LTR_ENABLE,
3577         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
3578         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
3579         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
3580         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
3581         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3582         WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3583         WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
3584         WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3585         WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
3586         WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
3587         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3588         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3589         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3590         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3591         WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3592         WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3593         WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3594         WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3595         WMI_10_4_PDEV_PARAM_PMF_QOS,
3596         WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
3597         WMI_10_4_PDEV_PARAM_DCS,
3598         WMI_10_4_PDEV_PARAM_ANI_ENABLE,
3599         WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
3600         WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
3601         WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
3602         WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
3603         WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
3604         WMI_10_4_PDEV_PARAM_PROXY_STA,
3605         WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
3606         WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
3607         WMI_10_4_PDEV_PARAM_AGGR_BURST,
3608         WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
3609         WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
3610         WMI_10_4_PDEV_PARAM_BURST_DUR,
3611         WMI_10_4_PDEV_PARAM_BURST_ENABLE,
3612         WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3613         WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
3614         WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
3615         WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
3616         WMI_10_4_PDEV_PARAM_RX_FILTER,
3617         WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
3618         WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
3619         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3620         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3621         WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3622         WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
3623         WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
3624         WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
3625         WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
3626         WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
3627         WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
3628         WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
3629         WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
3630         WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
3631         WMI_10_4_PDEV_PARAM_EN_STATS,
3632         WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
3633         WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
3634         WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
3635         WMI_10_4_PDEV_PARAM_DPD_ENABLE,
3636         WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
3637         WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
3638         WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
3639         WMI_10_4_PDEV_PARAM_ANT_PLZN,
3640         WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
3641         WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
3642         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
3643         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
3644         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
3645         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
3646         WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
3647         WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
3648         WMI_10_4_PDEV_PARAM_CAL_PERIOD,
3649         WMI_10_4_PDEV_PARAM_PDEV_RESET,
3650         WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
3651         WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
3652         WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
3653 };
3654
3655 struct wmi_pdev_set_param_cmd {
3656         __le32 param_id;
3657         __le32 param_value;
3658 } __packed;
3659
3660 /* valid period is 1 ~ 60000ms, unit in millisecond */
3661 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
3662
3663 struct wmi_pdev_get_tpc_config_cmd {
3664         /* parameter   */
3665         __le32 param;
3666 } __packed;
3667
3668 #define WMI_TPC_CONFIG_PARAM            1
3669 #define WMI_TPC_RATE_MAX                160
3670 #define WMI_TPC_TX_N_CHAIN              4
3671 #define WMI_TPC_PREAM_TABLE_MAX         10
3672 #define WMI_TPC_FLAG                    3
3673 #define WMI_TPC_BUF_SIZE                10
3674
3675 enum wmi_tpc_table_type {
3676         WMI_TPC_TABLE_TYPE_CDD = 0,
3677         WMI_TPC_TABLE_TYPE_STBC = 1,
3678         WMI_TPC_TABLE_TYPE_TXBF = 2,
3679 };
3680
3681 enum wmi_tpc_config_event_flag {
3682         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD     = 0x1,
3683         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC    = 0x2,
3684         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF    = 0x4,
3685 };
3686
3687 struct wmi_pdev_tpc_config_event {
3688         __le32 reg_domain;
3689         __le32 chan_freq;
3690         __le32 phy_mode;
3691         __le32 twice_antenna_reduction;
3692         __le32 twice_max_rd_power;
3693         a_sle32 twice_antenna_gain;
3694         __le32 power_limit;
3695         __le32 rate_max;
3696         __le32 num_tx_chain;
3697         __le32 ctl;
3698         __le32 flags;
3699         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
3700         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3701         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3702         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3703         u8 rates_array[WMI_TPC_RATE_MAX];
3704 } __packed;
3705
3706 /* Transmit power scale factor. */
3707 enum wmi_tp_scale {
3708         WMI_TP_SCALE_MAX    = 0,        /* no scaling (default) */
3709         WMI_TP_SCALE_50     = 1,        /* 50% of max (-3 dBm) */
3710         WMI_TP_SCALE_25     = 2,        /* 25% of max (-6 dBm) */
3711         WMI_TP_SCALE_12     = 3,        /* 12% of max (-9 dBm) */
3712         WMI_TP_SCALE_MIN    = 4,        /* min, but still on   */
3713         WMI_TP_SCALE_SIZE   = 5,        /* max num of enum     */
3714 };
3715
3716 struct wmi_pdev_chanlist_update_event {
3717         /* number of channels */
3718         __le32 num_chan;
3719         /* array of channels */
3720         struct wmi_channel channel_list[1];
3721 } __packed;
3722
3723 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
3724
3725 struct wmi_debug_mesg_event {
3726         /* message buffer, NULL terminated */
3727         char bufp[WMI_MAX_DEBUG_MESG];
3728 } __packed;
3729
3730 enum {
3731         /* P2P device */
3732         VDEV_SUBTYPE_P2PDEV = 0,
3733         /* P2P client */
3734         VDEV_SUBTYPE_P2PCLI,
3735         /* P2P GO */
3736         VDEV_SUBTYPE_P2PGO,
3737         /* BT3.0 HS */
3738         VDEV_SUBTYPE_BT,
3739 };
3740
3741 struct wmi_pdev_set_channel_cmd {
3742         /* idnore power , only use flags , mode and freq */
3743         struct wmi_channel chan;
3744 } __packed;
3745
3746 struct wmi_pdev_pktlog_enable_cmd {
3747         __le32 ev_bitmap;
3748 } __packed;
3749
3750 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
3751 #define WMI_DSCP_MAP_MAX    (64)
3752 struct wmi_pdev_set_dscp_tid_map_cmd {
3753         /* map indicating DSCP to TID conversion */
3754         __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
3755 } __packed;
3756
3757 enum mcast_bcast_rate_id {
3758         WMI_SET_MCAST_RATE,
3759         WMI_SET_BCAST_RATE
3760 };
3761
3762 struct mcast_bcast_rate {
3763         enum mcast_bcast_rate_id rate_id;
3764         __le32 rate;
3765 } __packed;
3766
3767 struct wmi_wmm_params {
3768         __le32 cwmin;
3769         __le32 cwmax;
3770         __le32 aifs;
3771         __le32 txop;
3772         __le32 acm;
3773         __le32 no_ack;
3774 } __packed;
3775
3776 struct wmi_pdev_set_wmm_params {
3777         struct wmi_wmm_params ac_be;
3778         struct wmi_wmm_params ac_bk;
3779         struct wmi_wmm_params ac_vi;
3780         struct wmi_wmm_params ac_vo;
3781 } __packed;
3782
3783 struct wmi_wmm_params_arg {
3784         u32 cwmin;
3785         u32 cwmax;
3786         u32 aifs;
3787         u32 txop;
3788         u32 acm;
3789         u32 no_ack;
3790 };
3791
3792 struct wmi_wmm_params_all_arg {
3793         struct wmi_wmm_params_arg ac_be;
3794         struct wmi_wmm_params_arg ac_bk;
3795         struct wmi_wmm_params_arg ac_vi;
3796         struct wmi_wmm_params_arg ac_vo;
3797 };
3798
3799 struct wmi_pdev_stats_tx {
3800         /* Num HTT cookies queued to dispatch list */
3801         __le32 comp_queued;
3802
3803         /* Num HTT cookies dispatched */
3804         __le32 comp_delivered;
3805
3806         /* Num MSDU queued to WAL */
3807         __le32 msdu_enqued;
3808
3809         /* Num MPDU queue to WAL */
3810         __le32 mpdu_enqued;
3811
3812         /* Num MSDUs dropped by WMM limit */
3813         __le32 wmm_drop;
3814
3815         /* Num Local frames queued */
3816         __le32 local_enqued;
3817
3818         /* Num Local frames done */
3819         __le32 local_freed;
3820
3821         /* Num queued to HW */
3822         __le32 hw_queued;
3823
3824         /* Num PPDU reaped from HW */
3825         __le32 hw_reaped;
3826
3827         /* Num underruns */
3828         __le32 underrun;
3829
3830         /* Num PPDUs cleaned up in TX abort */
3831         __le32 tx_abort;
3832
3833         /* Num MPDUs requed by SW */
3834         __le32 mpdus_requed;
3835
3836         /* excessive retries */
3837         __le32 tx_ko;
3838
3839         /* data hw rate code */
3840         __le32 data_rc;
3841
3842         /* Scheduler self triggers */
3843         __le32 self_triggers;
3844
3845         /* frames dropped due to excessive sw retries */
3846         __le32 sw_retry_failure;
3847
3848         /* illegal rate phy errors  */
3849         __le32 illgl_rate_phy_err;
3850
3851         /* wal pdev continous xretry */
3852         __le32 pdev_cont_xretry;
3853
3854         /* wal pdev continous xretry */
3855         __le32 pdev_tx_timeout;
3856
3857         /* wal pdev resets  */
3858         __le32 pdev_resets;
3859
3860         /* frames dropped due to non-availability of stateless TIDs */
3861         __le32 stateless_tid_alloc_failure;
3862
3863         __le32 phy_underrun;
3864
3865         /* MPDU is more than txop limit */
3866         __le32 txop_ovf;
3867 } __packed;
3868
3869 struct wmi_10_4_pdev_stats_tx {
3870         /* Num HTT cookies queued to dispatch list */
3871         __le32 comp_queued;
3872
3873         /* Num HTT cookies dispatched */
3874         __le32 comp_delivered;
3875
3876         /* Num MSDU queued to WAL */
3877         __le32 msdu_enqued;
3878
3879         /* Num MPDU queue to WAL */
3880         __le32 mpdu_enqued;
3881
3882         /* Num MSDUs dropped by WMM limit */
3883         __le32 wmm_drop;
3884
3885         /* Num Local frames queued */
3886         __le32 local_enqued;
3887
3888         /* Num Local frames done */
3889         __le32 local_freed;
3890
3891         /* Num queued to HW */
3892         __le32 hw_queued;
3893
3894         /* Num PPDU reaped from HW */
3895         __le32 hw_reaped;
3896
3897         /* Num underruns */
3898         __le32 underrun;
3899
3900         /* HW Paused. */
3901         __le32  hw_paused;
3902
3903         /* Num PPDUs cleaned up in TX abort */
3904         __le32 tx_abort;
3905
3906         /* Num MPDUs requed by SW */
3907         __le32 mpdus_requed;
3908
3909         /* excessive retries */
3910         __le32 tx_ko;
3911
3912         /* data hw rate code */
3913         __le32 data_rc;
3914
3915         /* Scheduler self triggers */
3916         __le32 self_triggers;
3917
3918         /* frames dropped due to excessive sw retries */
3919         __le32 sw_retry_failure;
3920
3921         /* illegal rate phy errors  */
3922         __le32 illgl_rate_phy_err;
3923
3924         /* wal pdev continuous xretry */
3925         __le32 pdev_cont_xretry;
3926
3927         /* wal pdev tx timeouts */
3928         __le32 pdev_tx_timeout;
3929
3930         /* wal pdev resets  */
3931         __le32 pdev_resets;
3932
3933         /* frames dropped due to non-availability of stateless TIDs */
3934         __le32 stateless_tid_alloc_failure;
3935
3936         __le32 phy_underrun;
3937
3938         /* MPDU is more than txop limit */
3939         __le32 txop_ovf;
3940
3941         /* Number of Sequences posted */
3942         __le32 seq_posted;
3943
3944         /* Number of Sequences failed queueing */
3945         __le32 seq_failed_queueing;
3946
3947         /* Number of Sequences completed */
3948         __le32 seq_completed;
3949
3950         /* Number of Sequences restarted */
3951         __le32 seq_restarted;
3952
3953         /* Number of MU Sequences posted */
3954         __le32 mu_seq_posted;
3955
3956         /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
3957         __le32 mpdus_sw_flush;
3958
3959         /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
3960         __le32 mpdus_hw_filter;
3961
3962         /* Num MPDUs truncated by PDG
3963          * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
3964          */
3965         __le32 mpdus_truncated;
3966
3967         /* Num MPDUs that was tried but didn't receive ACK or BA */
3968         __le32 mpdus_ack_failed;
3969
3970         /* Num MPDUs that was dropped due to expiry. */
3971         __le32 mpdus_expired;
3972 } __packed;
3973
3974 struct wmi_pdev_stats_rx {
3975         /* Cnts any change in ring routing mid-ppdu */
3976         __le32 mid_ppdu_route_change;
3977
3978         /* Total number of statuses processed */
3979         __le32 status_rcvd;
3980
3981         /* Extra frags on rings 0-3 */
3982         __le32 r0_frags;
3983         __le32 r1_frags;
3984         __le32 r2_frags;
3985         __le32 r3_frags;
3986
3987         /* MSDUs / MPDUs delivered to HTT */
3988         __le32 htt_msdus;
3989         __le32 htt_mpdus;
3990
3991         /* MSDUs / MPDUs delivered to local stack */
3992         __le32 loc_msdus;
3993         __le32 loc_mpdus;
3994
3995         /* AMSDUs that have more MSDUs than the status ring size */
3996         __le32 oversize_amsdu;
3997
3998         /* Number of PHY errors */
3999         __le32 phy_errs;
4000
4001         /* Number of PHY errors drops */
4002         __le32 phy_err_drop;
4003
4004         /* Number of mpdu errors - FCS, MIC, ENC etc. */
4005         __le32 mpdu_errs;
4006 } __packed;
4007
4008 struct wmi_pdev_stats_peer {
4009         /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4010         __le32 dummy;
4011 } __packed;
4012
4013 enum wmi_stats_id {
4014         WMI_STAT_PEER = BIT(0),
4015         WMI_STAT_AP = BIT(1),
4016         WMI_STAT_PDEV = BIT(2),
4017         WMI_STAT_VDEV = BIT(3),
4018         WMI_STAT_BCNFLT = BIT(4),
4019         WMI_STAT_VDEV_RATE = BIT(5),
4020 };
4021
4022 struct wlan_inst_rssi_args {
4023         __le16 cfg_retry_count;
4024         __le16 retry_count;
4025 };
4026
4027 struct wmi_request_stats_cmd {
4028         __le32 stats_id;
4029
4030         __le32 vdev_id;
4031
4032         /* peer MAC address */
4033         struct wmi_mac_addr peer_macaddr;
4034
4035         /* Instantaneous RSSI arguments */
4036         struct wlan_inst_rssi_args inst_rssi_args;
4037 } __packed;
4038
4039 /* Suspend option */
4040 enum {
4041         /* suspend */
4042         WMI_PDEV_SUSPEND,
4043
4044         /* suspend and disable all interrupts */
4045         WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4046 };
4047
4048 struct wmi_pdev_suspend_cmd {
4049         /* suspend option sent to target */
4050         __le32 suspend_opt;
4051 } __packed;
4052
4053 struct wmi_stats_event {
4054         __le32 stats_id; /* WMI_STAT_ */
4055         /*
4056          * number of pdev stats event structures
4057          * (wmi_pdev_stats) 0 or 1
4058          */
4059         __le32 num_pdev_stats;
4060         /*
4061          * number of vdev stats event structures
4062          * (wmi_vdev_stats) 0 or max vdevs
4063          */
4064         __le32 num_vdev_stats;
4065         /*
4066          * number of peer stats event structures
4067          * (wmi_peer_stats) 0 or max peers
4068          */
4069         __le32 num_peer_stats;
4070         __le32 num_bcnflt_stats;
4071         /*
4072          * followed by
4073          *   num_pdev_stats * size of(struct wmi_pdev_stats)
4074          *   num_vdev_stats * size of(struct wmi_vdev_stats)
4075          *   num_peer_stats * size of(struct wmi_peer_stats)
4076          *
4077          *  By having a zero sized array, the pointer to data area
4078          *  becomes available without increasing the struct size
4079          */
4080         u8 data[0];
4081 } __packed;
4082
4083 struct wmi_10_2_stats_event {
4084         __le32 stats_id; /* %WMI_REQUEST_ */
4085         __le32 num_pdev_stats;
4086         __le32 num_pdev_ext_stats;
4087         __le32 num_vdev_stats;
4088         __le32 num_peer_stats;
4089         __le32 num_bcnflt_stats;
4090         u8 data[0];
4091 } __packed;
4092
4093 /*
4094  * PDEV statistics
4095  * TODO: add all PDEV stats here
4096  */
4097 struct wmi_pdev_stats_base {
4098         __le32 chan_nf;
4099         __le32 tx_frame_count;
4100         __le32 rx_frame_count;
4101         __le32 rx_clear_count;
4102         __le32 cycle_count;
4103         __le32 phy_err_count;
4104         __le32 chan_tx_pwr;
4105 } __packed;
4106
4107 struct wmi_pdev_stats {
4108         struct wmi_pdev_stats_base base;
4109         struct wmi_pdev_stats_tx tx;
4110         struct wmi_pdev_stats_rx rx;
4111         struct wmi_pdev_stats_peer peer;
4112 } __packed;
4113
4114 struct wmi_pdev_stats_extra {
4115         __le32 ack_rx_bad;
4116         __le32 rts_bad;
4117         __le32 rts_good;
4118         __le32 fcs_bad;
4119         __le32 no_beacons;
4120         __le32 mib_int_count;
4121 } __packed;
4122
4123 struct wmi_10x_pdev_stats {
4124         struct wmi_pdev_stats_base base;
4125         struct wmi_pdev_stats_tx tx;
4126         struct wmi_pdev_stats_rx rx;
4127         struct wmi_pdev_stats_peer peer;
4128         struct wmi_pdev_stats_extra extra;
4129 } __packed;
4130
4131 struct wmi_pdev_stats_mem {
4132         __le32 dram_free;
4133         __le32 iram_free;
4134 } __packed;
4135
4136 struct wmi_10_2_pdev_stats {
4137         struct wmi_pdev_stats_base base;
4138         struct wmi_pdev_stats_tx tx;
4139         __le32 mc_drop;
4140         struct wmi_pdev_stats_rx rx;
4141         __le32 pdev_rx_timeout;
4142         struct wmi_pdev_stats_mem mem;
4143         struct wmi_pdev_stats_peer peer;
4144         struct wmi_pdev_stats_extra extra;
4145 } __packed;
4146
4147 struct wmi_10_4_pdev_stats {
4148         struct wmi_pdev_stats_base base;
4149         struct wmi_10_4_pdev_stats_tx tx;
4150         struct wmi_pdev_stats_rx rx;
4151         __le32 rx_ovfl_errs;
4152         struct wmi_pdev_stats_mem mem;
4153         __le32 sram_free_size;
4154         struct wmi_pdev_stats_extra extra;
4155 } __packed;
4156
4157 /*
4158  * VDEV statistics
4159  * TODO: add all VDEV stats here
4160  */
4161 struct wmi_vdev_stats {
4162         __le32 vdev_id;
4163 } __packed;
4164
4165 /*
4166  * peer statistics.
4167  * TODO: add more stats
4168  */
4169 struct wmi_peer_stats {
4170         struct wmi_mac_addr peer_macaddr;
4171         __le32 peer_rssi;
4172         __le32 peer_tx_rate;
4173 } __packed;
4174
4175 struct wmi_10x_peer_stats {
4176         struct wmi_peer_stats old;
4177         __le32 peer_rx_rate;
4178 } __packed;
4179
4180 struct wmi_10_2_peer_stats {
4181         struct wmi_peer_stats old;
4182         __le32 peer_rx_rate;
4183         __le32 current_per;
4184         __le32 retries;
4185         __le32 tx_rate_count;
4186         __le32 max_4ms_frame_len;
4187         __le32 total_sub_frames;
4188         __le32 tx_bytes;
4189         __le32 num_pkt_loss_overflow[4];
4190         __le32 num_pkt_loss_excess_retry[4];
4191 } __packed;
4192
4193 struct wmi_10_2_4_peer_stats {
4194         struct wmi_10_2_peer_stats common;
4195         __le32 unknown_value; /* FIXME: what is this word? */
4196 } __packed;
4197
4198 struct wmi_10_4_peer_stats {
4199         struct wmi_mac_addr peer_macaddr;
4200         __le32 peer_rssi;
4201         __le32 peer_rssi_seq_num;
4202         __le32 peer_tx_rate;
4203         __le32 peer_rx_rate;
4204         __le32 current_per;
4205         __le32 retries;
4206         __le32 tx_rate_count;
4207         __le32 max_4ms_frame_len;
4208         __le32 total_sub_frames;
4209         __le32 tx_bytes;
4210         __le32 num_pkt_loss_overflow[4];
4211         __le32 num_pkt_loss_excess_retry[4];
4212         __le32 peer_rssi_changed;
4213 } __packed;
4214
4215 struct wmi_10_2_pdev_ext_stats {
4216         __le32 rx_rssi_comb;
4217         __le32 rx_rssi[4];
4218         __le32 rx_mcs[10];
4219         __le32 tx_mcs[10];
4220         __le32 ack_rssi;
4221 } __packed;
4222
4223 struct wmi_vdev_create_cmd {
4224         __le32 vdev_id;
4225         __le32 vdev_type;
4226         __le32 vdev_subtype;
4227         struct wmi_mac_addr vdev_macaddr;
4228 } __packed;
4229
4230 enum wmi_vdev_type {
4231         WMI_VDEV_TYPE_AP      = 1,
4232         WMI_VDEV_TYPE_STA     = 2,
4233         WMI_VDEV_TYPE_IBSS    = 3,
4234         WMI_VDEV_TYPE_MONITOR = 4,
4235 };
4236
4237 enum wmi_vdev_subtype {
4238         WMI_VDEV_SUBTYPE_NONE       = 0,
4239         WMI_VDEV_SUBTYPE_P2P_DEVICE = 1,
4240         WMI_VDEV_SUBTYPE_P2P_CLIENT = 2,
4241         WMI_VDEV_SUBTYPE_P2P_GO     = 3,
4242 };
4243
4244 /* values for vdev_subtype */
4245
4246 /* values for vdev_start_request flags */
4247 /*
4248  * Indicates that AP VDEV uses hidden ssid. only valid for
4249  *  AP/GO */
4250 #define WMI_VDEV_START_HIDDEN_SSID  (1<<0)
4251 /*
4252  * Indicates if robust management frame/management frame
4253  *  protection is enabled. For GO/AP vdevs, it indicates that
4254  *  it may support station/client associations with RMF enabled.
4255  *  For STA/client vdevs, it indicates that sta will
4256  *  associate with AP with RMF enabled. */
4257 #define WMI_VDEV_START_PMF_ENABLED  (1<<1)
4258
4259 struct wmi_p2p_noa_descriptor {
4260         __le32 type_count; /* 255: continuous schedule, 0: reserved */
4261         __le32 duration;  /* Absent period duration in micro seconds */
4262         __le32 interval;   /* Absent period interval in micro seconds */
4263         __le32 start_time; /* 32 bit tsf time when in starts */
4264 } __packed;
4265
4266 struct wmi_vdev_start_request_cmd {
4267         /* WMI channel */
4268         struct wmi_channel chan;
4269         /* unique id identifying the VDEV, generated by the caller */
4270         __le32 vdev_id;
4271         /* requestor id identifying the caller module */
4272         __le32 requestor_id;
4273         /* beacon interval from received beacon */
4274         __le32 beacon_interval;
4275         /* DTIM Period from the received beacon */
4276         __le32 dtim_period;
4277         /* Flags */
4278         __le32 flags;
4279         /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4280         struct wmi_ssid ssid;
4281         /* beacon/probe reponse xmit rate. Applicable for SoftAP. */
4282         __le32 bcn_tx_rate;
4283         /* beacon/probe reponse xmit power. Applicable for SoftAP. */
4284         __le32 bcn_tx_power;
4285         /* number of p2p NOA descriptor(s) from scan entry */
4286         __le32 num_noa_descriptors;
4287         /*
4288          * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4289          * During CAC, Our HW shouldn't ack ditected frames
4290          */
4291         __le32 disable_hw_ack;
4292         /* actual p2p NOA descriptor from scan entry */
4293         struct wmi_p2p_noa_descriptor noa_descriptors[2];
4294 } __packed;
4295
4296 struct wmi_vdev_restart_request_cmd {
4297         struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4298 } __packed;
4299
4300 struct wmi_vdev_start_request_arg {
4301         u32 vdev_id;
4302         struct wmi_channel_arg channel;
4303         u32 bcn_intval;
4304         u32 dtim_period;
4305         u8 *ssid;
4306         u32 ssid_len;
4307         u32 bcn_tx_rate;
4308         u32 bcn_tx_power;
4309         bool disable_hw_ack;
4310         bool hidden_ssid;
4311         bool pmf_enabled;
4312 };
4313
4314 struct wmi_vdev_delete_cmd {
4315         /* unique id identifying the VDEV, generated by the caller */
4316         __le32 vdev_id;
4317 } __packed;
4318
4319 struct wmi_vdev_up_cmd {
4320         __le32 vdev_id;
4321         __le32 vdev_assoc_id;
4322         struct wmi_mac_addr vdev_bssid;
4323 } __packed;
4324
4325 struct wmi_vdev_stop_cmd {
4326         __le32 vdev_id;
4327 } __packed;
4328
4329 struct wmi_vdev_down_cmd {
4330         __le32 vdev_id;
4331 } __packed;
4332
4333 struct wmi_vdev_standby_response_cmd {
4334         /* unique id identifying the VDEV, generated by the caller */
4335         __le32 vdev_id;
4336 } __packed;
4337
4338 struct wmi_vdev_resume_response_cmd {
4339         /* unique id identifying the VDEV, generated by the caller */
4340         __le32 vdev_id;
4341 } __packed;
4342
4343 struct wmi_vdev_set_param_cmd {
4344         __le32 vdev_id;
4345         __le32 param_id;
4346         __le32 param_value;
4347 } __packed;
4348
4349 #define WMI_MAX_KEY_INDEX   3
4350 #define WMI_MAX_KEY_LEN     32
4351
4352 #define WMI_KEY_PAIRWISE 0x00
4353 #define WMI_KEY_GROUP    0x01
4354 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
4355
4356 struct wmi_key_seq_counter {
4357         __le32 key_seq_counter_l;
4358         __le32 key_seq_counter_h;
4359 } __packed;
4360
4361 #define WMI_CIPHER_NONE     0x0 /* clear key */
4362 #define WMI_CIPHER_WEP      0x1
4363 #define WMI_CIPHER_TKIP     0x2
4364 #define WMI_CIPHER_AES_OCB  0x3
4365 #define WMI_CIPHER_AES_CCM  0x4
4366 #define WMI_CIPHER_WAPI     0x5
4367 #define WMI_CIPHER_CKIP     0x6
4368 #define WMI_CIPHER_AES_CMAC 0x7
4369
4370 struct wmi_vdev_install_key_cmd {
4371         __le32 vdev_id;
4372         struct wmi_mac_addr peer_macaddr;
4373         __le32 key_idx;
4374         __le32 key_flags;
4375         __le32 key_cipher; /* %WMI_CIPHER_ */
4376         struct wmi_key_seq_counter key_rsc_counter;
4377         struct wmi_key_seq_counter key_global_rsc_counter;
4378         struct wmi_key_seq_counter key_tsc_counter;
4379         u8 wpi_key_rsc_counter[16];
4380         u8 wpi_key_tsc_counter[16];
4381         __le32 key_len;
4382         __le32 key_txmic_len;
4383         __le32 key_rxmic_len;
4384
4385         /* contains key followed by tx mic followed by rx mic */
4386         u8 key_data[0];
4387 } __packed;
4388
4389 struct wmi_vdev_install_key_arg {
4390         u32 vdev_id;
4391         const u8 *macaddr;
4392         u32 key_idx;
4393         u32 key_flags;
4394         u32 key_cipher;
4395         u32 key_len;
4396         u32 key_txmic_len;
4397         u32 key_rxmic_len;
4398         const void *key_data;
4399 };
4400
4401 /*
4402  * vdev fixed rate format:
4403  * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
4404  * - nss      - b5:b4 - ss number (0 mean 1ss)
4405  * - rate_mcs - b3:b0 - as below
4406  *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
4407  *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
4408  *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
4409  *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
4410  *    HT/VHT: MCS index
4411  */
4412
4413 /* Preamble types to be used with VDEV fixed rate configuration */
4414 enum wmi_rate_preamble {
4415         WMI_RATE_PREAMBLE_OFDM,
4416         WMI_RATE_PREAMBLE_CCK,
4417         WMI_RATE_PREAMBLE_HT,
4418         WMI_RATE_PREAMBLE_VHT,
4419 };
4420
4421 #define ATH10K_HW_NSS(rate)             (1 + (((rate) >> 4) & 0x3))
4422 #define ATH10K_HW_PREAMBLE(rate)        (((rate) >> 6) & 0x3)
4423 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
4424         (((preamble) << 6) | ((nss) << 4) | (rate))
4425
4426 /* Value to disable fixed rate setting */
4427 #define WMI_FIXED_RATE_NONE    (0xff)
4428
4429 struct wmi_vdev_param_map {
4430         u32 rts_threshold;
4431         u32 fragmentation_threshold;
4432         u32 beacon_interval;
4433         u32 listen_interval;
4434         u32 multicast_rate;
4435         u32 mgmt_tx_rate;
4436         u32 slot_time;
4437         u32 preamble;
4438         u32 swba_time;
4439         u32 wmi_vdev_stats_update_period;
4440         u32 wmi_vdev_pwrsave_ageout_time;
4441         u32 wmi_vdev_host_swba_interval;
4442         u32 dtim_period;
4443         u32 wmi_vdev_oc_scheduler_air_time_limit;
4444         u32 wds;
4445         u32 atim_window;
4446         u32 bmiss_count_max;
4447         u32 bmiss_first_bcnt;
4448         u32 bmiss_final_bcnt;
4449         u32 feature_wmm;
4450         u32 chwidth;
4451         u32 chextoffset;
4452         u32 disable_htprotection;
4453         u32 sta_quickkickout;
4454         u32 mgmt_rate;
4455         u32 protection_mode;
4456         u32 fixed_rate;
4457         u32 sgi;
4458         u32 ldpc;
4459         u32 tx_stbc;
4460         u32 rx_stbc;
4461         u32 intra_bss_fwd;
4462         u32 def_keyid;
4463         u32 nss;
4464         u32 bcast_data_rate;
4465         u32 mcast_data_rate;
4466         u32 mcast_indicate;
4467         u32 dhcp_indicate;
4468         u32 unknown_dest_indicate;
4469         u32 ap_keepalive_min_idle_inactive_time_secs;
4470         u32 ap_keepalive_max_idle_inactive_time_secs;
4471         u32 ap_keepalive_max_unresponsive_time_secs;
4472         u32 ap_enable_nawds;
4473         u32 mcast2ucast_set;
4474         u32 enable_rtscts;
4475         u32 txbf;
4476         u32 packet_powersave;
4477         u32 drop_unencry;
4478         u32 tx_encap_type;
4479         u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
4480         u32 rc_num_retries;
4481         u32 cabq_maxdur;
4482         u32 mfptest_set;
4483         u32 rts_fixed_rate;
4484         u32 vht_sgimask;
4485         u32 vht80_ratemask;
4486         u32 early_rx_adjust_enable;
4487         u32 early_rx_tgt_bmiss_num;
4488         u32 early_rx_bmiss_sample_cycle;
4489         u32 early_rx_slop_step;
4490         u32 early_rx_init_slop;
4491         u32 early_rx_adjust_pause;
4492         u32 proxy_sta;
4493         u32 meru_vc;
4494         u32 rx_decap_type;
4495         u32 bw_nss_ratemask;
4496 };
4497
4498 #define WMI_VDEV_PARAM_UNSUPPORTED 0
4499
4500 /* the definition of different VDEV parameters */
4501 enum wmi_vdev_param {
4502         /* RTS Threshold */
4503         WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4504         /* Fragmentation threshold */
4505         WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4506         /* beacon interval in TUs */
4507         WMI_VDEV_PARAM_BEACON_INTERVAL,
4508         /* Listen interval in TUs */
4509         WMI_VDEV_PARAM_LISTEN_INTERVAL,
4510         /* muticast rate in Mbps */
4511         WMI_VDEV_PARAM_MULTICAST_RATE,
4512         /* management frame rate in Mbps */
4513         WMI_VDEV_PARAM_MGMT_TX_RATE,
4514         /* slot time (long vs short) */
4515         WMI_VDEV_PARAM_SLOT_TIME,
4516         /* preamble (long vs short) */
4517         WMI_VDEV_PARAM_PREAMBLE,
4518         /* SWBA time (time before tbtt in msec) */
4519         WMI_VDEV_PARAM_SWBA_TIME,
4520         /* time period for updating VDEV stats */
4521         WMI_VDEV_STATS_UPDATE_PERIOD,
4522         /* age out time in msec for frames queued for station in power save */
4523         WMI_VDEV_PWRSAVE_AGEOUT_TIME,
4524         /*
4525          * Host SWBA interval (time in msec before tbtt for SWBA event
4526          * generation).
4527          */
4528         WMI_VDEV_HOST_SWBA_INTERVAL,
4529         /* DTIM period (specified in units of num beacon intervals) */
4530         WMI_VDEV_PARAM_DTIM_PERIOD,
4531         /*
4532          * scheduler air time limit for this VDEV. used by off chan
4533          * scheduler.
4534          */
4535         WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4536         /* enable/dsiable WDS for this VDEV  */
4537         WMI_VDEV_PARAM_WDS,
4538         /* ATIM Window */
4539         WMI_VDEV_PARAM_ATIM_WINDOW,
4540         /* BMISS max */
4541         WMI_VDEV_PARAM_BMISS_COUNT_MAX,
4542         /* BMISS first time */
4543         WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
4544         /* BMISS final time */
4545         WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
4546         /* WMM enables/disabled */
4547         WMI_VDEV_PARAM_FEATURE_WMM,
4548         /* Channel width */
4549         WMI_VDEV_PARAM_CHWIDTH,
4550         /* Channel Offset */
4551         WMI_VDEV_PARAM_CHEXTOFFSET,
4552         /* Disable HT Protection */
4553         WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
4554         /* Quick STA Kickout */
4555         WMI_VDEV_PARAM_STA_QUICKKICKOUT,
4556         /* Rate to be used with Management frames */
4557         WMI_VDEV_PARAM_MGMT_RATE,
4558         /* Protection Mode */
4559         WMI_VDEV_PARAM_PROTECTION_MODE,
4560         /* Fixed rate setting */
4561         WMI_VDEV_PARAM_FIXED_RATE,
4562         /* Short GI Enable/Disable */
4563         WMI_VDEV_PARAM_SGI,
4564         /* Enable LDPC */
4565         WMI_VDEV_PARAM_LDPC,
4566         /* Enable Tx STBC */
4567         WMI_VDEV_PARAM_TX_STBC,
4568         /* Enable Rx STBC */
4569         WMI_VDEV_PARAM_RX_STBC,
4570         /* Intra BSS forwarding  */
4571         WMI_VDEV_PARAM_INTRA_BSS_FWD,
4572         /* Setting Default xmit key for Vdev */
4573         WMI_VDEV_PARAM_DEF_KEYID,
4574         /* NSS width */
4575         WMI_VDEV_PARAM_NSS,
4576         /* Set the custom rate for the broadcast data frames */
4577         WMI_VDEV_PARAM_BCAST_DATA_RATE,
4578         /* Set the custom rate (rate-code) for multicast data frames */
4579         WMI_VDEV_PARAM_MCAST_DATA_RATE,
4580         /* Tx multicast packet indicate Enable/Disable */
4581         WMI_VDEV_PARAM_MCAST_INDICATE,
4582         /* Tx DHCP packet indicate Enable/Disable */
4583         WMI_VDEV_PARAM_DHCP_INDICATE,
4584         /* Enable host inspection of Tx unicast packet to unknown destination */
4585         WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4586
4587         /* The minimum amount of time AP begins to consider STA inactive */
4588         WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4589
4590         /*
4591          * An associated STA is considered inactive when there is no recent
4592          * TX/RX activity and no downlink frames are buffered for it. Once a
4593          * STA exceeds the maximum idle inactive time, the AP will send an
4594          * 802.11 data-null as a keep alive to verify the STA is still
4595          * associated. If the STA does ACK the data-null, or if the data-null
4596          * is buffered and the STA does not retrieve it, the STA will be
4597          * considered unresponsive
4598          * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4599          */
4600         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4601
4602         /*
4603          * An associated STA is considered unresponsive if there is no recent
4604          * TX/RX activity and downlink frames are buffered for it. Once a STA
4605          * exceeds the maximum unresponsive time, the AP will send a
4606          * WMI_STA_KICKOUT event to the host so the STA can be deleted. */
4607         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4608
4609         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4610         WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
4611         /* Enable/Disable RTS-CTS */
4612         WMI_VDEV_PARAM_ENABLE_RTSCTS,
4613         /* Enable TXBFee/er */
4614         WMI_VDEV_PARAM_TXBF,
4615
4616         /* Set packet power save */
4617         WMI_VDEV_PARAM_PACKET_POWERSAVE,
4618
4619         /*
4620          * Drops un-encrypted packets if eceived in an encrypted connection
4621          * otherwise forwards to host.
4622          */
4623         WMI_VDEV_PARAM_DROP_UNENCRY,
4624
4625         /*
4626          * Set the encapsulation type for frames.
4627          */
4628         WMI_VDEV_PARAM_TX_ENCAP_TYPE,
4629 };
4630
4631 /* the definition of different VDEV parameters */
4632 enum wmi_10x_vdev_param {
4633         /* RTS Threshold */
4634         WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4635         /* Fragmentation threshold */
4636         WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4637         /* beacon interval in TUs */
4638         WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
4639         /* Listen interval in TUs */
4640         WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
4641         /* muticast rate in Mbps */
4642         WMI_10X_VDEV_PARAM_MULTICAST_RATE,
4643         /* management frame rate in Mbps */
4644         WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
4645         /* slot time (long vs short) */
4646         WMI_10X_VDEV_PARAM_SLOT_TIME,
4647         /* preamble (long vs short) */
4648         WMI_10X_VDEV_PARAM_PREAMBLE,
4649         /* SWBA time (time before tbtt in msec) */
4650         WMI_10X_VDEV_PARAM_SWBA_TIME,
4651         /* time period for updating VDEV stats */
4652         WMI_10X_VDEV_STATS_UPDATE_PERIOD,
4653         /* age out time in msec for frames queued for station in power save */
4654         WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
4655         /*
4656          * Host SWBA interval (time in msec before tbtt for SWBA event
4657          * generation).
4658          */
4659         WMI_10X_VDEV_HOST_SWBA_INTERVAL,
4660         /* DTIM period (specified in units of num beacon intervals) */
4661         WMI_10X_VDEV_PARAM_DTIM_PERIOD,
4662         /*
4663          * scheduler air time limit for this VDEV. used by off chan
4664          * scheduler.
4665          */
4666         WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4667         /* enable/dsiable WDS for this VDEV  */
4668         WMI_10X_VDEV_PARAM_WDS,
4669         /* ATIM Window */
4670         WMI_10X_VDEV_PARAM_ATIM_WINDOW,
4671         /* BMISS max */
4672         WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
4673         /* WMM enables/disabled */
4674         WMI_10X_VDEV_PARAM_FEATURE_WMM,
4675         /* Channel width */
4676         WMI_10X_VDEV_PARAM_CHWIDTH,
4677         /* Channel Offset */
4678         WMI_10X_VDEV_PARAM_CHEXTOFFSET,
4679         /* Disable HT Protection */
4680         WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
4681         /* Quick STA Kickout */
4682         WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
4683         /* Rate to be used with Management frames */
4684         WMI_10X_VDEV_PARAM_MGMT_RATE,
4685         /* Protection Mode */
4686         WMI_10X_VDEV_PARAM_PROTECTION_MODE,
4687         /* Fixed rate setting */
4688         WMI_10X_VDEV_PARAM_FIXED_RATE,
4689         /* Short GI Enable/Disable */
4690         WMI_10X_VDEV_PARAM_SGI,
4691         /* Enable LDPC */
4692         WMI_10X_VDEV_PARAM_LDPC,
4693         /* Enable Tx STBC */
4694         WMI_10X_VDEV_PARAM_TX_STBC,
4695         /* Enable Rx STBC */
4696         WMI_10X_VDEV_PARAM_RX_STBC,
4697         /* Intra BSS forwarding  */
4698         WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
4699         /* Setting Default xmit key for Vdev */
4700         WMI_10X_VDEV_PARAM_DEF_KEYID,
4701         /* NSS width */
4702         WMI_10X_VDEV_PARAM_NSS,
4703         /* Set the custom rate for the broadcast data frames */
4704         WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
4705         /* Set the custom rate (rate-code) for multicast data frames */
4706         WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
4707         /* Tx multicast packet indicate Enable/Disable */
4708         WMI_10X_VDEV_PARAM_MCAST_INDICATE,
4709         /* Tx DHCP packet indicate Enable/Disable */
4710         WMI_10X_VDEV_PARAM_DHCP_INDICATE,
4711         /* Enable host inspection of Tx unicast packet to unknown destination */
4712         WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4713
4714         /* The minimum amount of time AP begins to consider STA inactive */
4715         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4716
4717         /*
4718          * An associated STA is considered inactive when there is no recent
4719          * TX/RX activity and no downlink frames are buffered for it. Once a
4720          * STA exceeds the maximum idle inactive time, the AP will send an
4721          * 802.11 data-null as a keep alive to verify the STA is still
4722          * associated. If the STA does ACK the data-null, or if the data-null
4723          * is buffered and the STA does not retrieve it, the STA will be
4724          * considered unresponsive
4725          * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4726          */
4727         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4728
4729         /*
4730          * An associated STA is considered unresponsive if there is no recent
4731          * TX/RX activity and downlink frames are buffered for it. Once a STA
4732          * exceeds the maximum unresponsive time, the AP will send a
4733          * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */
4734         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4735
4736         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4737         WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
4738
4739         WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
4740         /* Enable/Disable RTS-CTS */
4741         WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
4742
4743         WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4744
4745         /* following are available as of firmware 10.2 */
4746         WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
4747         WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
4748         WMI_10X_VDEV_PARAM_MFPTEST_SET,
4749         WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
4750         WMI_10X_VDEV_PARAM_VHT_SGIMASK,
4751         WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
4752 };
4753
4754 enum wmi_10_4_vdev_param {
4755         WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4756         WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4757         WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
4758         WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
4759         WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
4760         WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
4761         WMI_10_4_VDEV_PARAM_SLOT_TIME,
4762         WMI_10_4_VDEV_PARAM_PREAMBLE,
4763         WMI_10_4_VDEV_PARAM_SWBA_TIME,
4764         WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
4765         WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
4766         WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
4767         WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
4768         WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4769         WMI_10_4_VDEV_PARAM_WDS,
4770         WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
4771         WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
4772         WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
4773         WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
4774         WMI_10_4_VDEV_PARAM_FEATURE_WMM,
4775         WMI_10_4_VDEV_PARAM_CHWIDTH,
4776         WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
4777         WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
4778         WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
4779         WMI_10_4_VDEV_PARAM_MGMT_RATE,
4780         WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
4781         WMI_10_4_VDEV_PARAM_FIXED_RATE,
4782         WMI_10_4_VDEV_PARAM_SGI,
4783         WMI_10_4_VDEV_PARAM_LDPC,
4784         WMI_10_4_VDEV_PARAM_TX_STBC,
4785         WMI_10_4_VDEV_PARAM_RX_STBC,
4786         WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
4787         WMI_10_4_VDEV_PARAM_DEF_KEYID,
4788         WMI_10_4_VDEV_PARAM_NSS,
4789         WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
4790         WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
4791         WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
4792         WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
4793         WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4794         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4795         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4796         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4797         WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
4798         WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
4799         WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
4800         WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
4801         WMI_10_4_VDEV_PARAM_TXBF,
4802         WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
4803         WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
4804         WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
4805         WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4806         WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
4807         WMI_10_4_VDEV_PARAM_MFPTEST_SET,
4808         WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
4809         WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
4810         WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
4811         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
4812         WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
4813         WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
4814         WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
4815         WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
4816         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
4817         WMI_10_4_VDEV_PARAM_PROXY_STA,
4818         WMI_10_4_VDEV_PARAM_MERU_VC,
4819         WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
4820         WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
4821 };
4822
4823 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
4824 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
4825 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
4826 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
4827
4828 #define WMI_TXBF_STS_CAP_OFFSET_LSB     4
4829 #define WMI_TXBF_STS_CAP_OFFSET_MASK    0xf0
4830 #define WMI_BF_SOUND_DIM_OFFSET_LSB     8
4831 #define WMI_BF_SOUND_DIM_OFFSET_MASK    0xf00
4832
4833 /* slot time long */
4834 #define WMI_VDEV_SLOT_TIME_LONG         0x1
4835 /* slot time short */
4836 #define WMI_VDEV_SLOT_TIME_SHORT        0x2
4837 /* preablbe long */
4838 #define WMI_VDEV_PREAMBLE_LONG          0x1
4839 /* preablbe short */
4840 #define WMI_VDEV_PREAMBLE_SHORT         0x2
4841
4842 enum wmi_start_event_param {
4843         WMI_VDEV_RESP_START_EVENT = 0,
4844         WMI_VDEV_RESP_RESTART_EVENT,
4845 };
4846
4847 struct wmi_vdev_start_response_event {
4848         __le32 vdev_id;
4849         __le32 req_id;
4850         __le32 resp_type; /* %WMI_VDEV_RESP_ */
4851         __le32 status;
4852 } __packed;
4853
4854 struct wmi_vdev_standby_req_event {
4855         /* unique id identifying the VDEV, generated by the caller */
4856         __le32 vdev_id;
4857 } __packed;
4858
4859 struct wmi_vdev_resume_req_event {
4860         /* unique id identifying the VDEV, generated by the caller */
4861         __le32 vdev_id;
4862 } __packed;
4863
4864 struct wmi_vdev_stopped_event {
4865         /* unique id identifying the VDEV, generated by the caller */
4866         __le32 vdev_id;
4867 } __packed;
4868
4869 /*
4870  * common structure used for simple events
4871  * (stopped, resume_req, standby response)
4872  */
4873 struct wmi_vdev_simple_event {
4874         /* unique id identifying the VDEV, generated by the caller */
4875         __le32 vdev_id;
4876 } __packed;
4877
4878 /* VDEV start response status codes */
4879 /* VDEV succesfully started */
4880 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS  0x0
4881
4882 /* requested VDEV not found */
4883 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID  0x1
4884
4885 /* unsupported VDEV combination */
4886 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED   0x2
4887
4888 /* TODO: please add more comments if you have in-depth information */
4889 struct wmi_vdev_spectral_conf_cmd {
4890         __le32 vdev_id;
4891
4892         /* number of fft samples to send (0 for infinite) */
4893         __le32 scan_count;
4894         __le32 scan_period;
4895         __le32 scan_priority;
4896
4897         /* number of bins in the FFT: 2^(fft_size - bin_scale) */
4898         __le32 scan_fft_size;
4899         __le32 scan_gc_ena;
4900         __le32 scan_restart_ena;
4901         __le32 scan_noise_floor_ref;
4902         __le32 scan_init_delay;
4903         __le32 scan_nb_tone_thr;
4904         __le32 scan_str_bin_thr;
4905         __le32 scan_wb_rpt_mode;
4906         __le32 scan_rssi_rpt_mode;
4907         __le32 scan_rssi_thr;
4908         __le32 scan_pwr_format;
4909
4910         /* rpt_mode: Format of FFT report to software for spectral scan
4911          * triggered FFTs:
4912          *      0: No FFT report (only spectral scan summary report)
4913          *      1: 2-dword summary of metrics for each completed FFT + spectral
4914          *         scan summary report
4915          *      2: 2-dword summary of metrics for each completed FFT +
4916          *         1x- oversampled bins(in-band) per FFT + spectral scan summary
4917          *         report
4918          *      3: 2-dword summary of metrics for each completed FFT +
4919          *         2x- oversampled bins (all) per FFT + spectral scan summary
4920          */
4921         __le32 scan_rpt_mode;
4922         __le32 scan_bin_scale;
4923         __le32 scan_dbm_adj;
4924         __le32 scan_chn_mask;
4925 } __packed;
4926
4927 struct wmi_vdev_spectral_conf_arg {
4928         u32 vdev_id;
4929         u32 scan_count;
4930         u32 scan_period;
4931         u32 scan_priority;
4932         u32 scan_fft_size;
4933         u32 scan_gc_ena;
4934         u32 scan_restart_ena;
4935         u32 scan_noise_floor_ref;
4936         u32 scan_init_delay;
4937         u32 scan_nb_tone_thr;
4938         u32 scan_str_bin_thr;
4939         u32 scan_wb_rpt_mode;
4940         u32 scan_rssi_rpt_mode;
4941         u32 scan_rssi_thr;
4942         u32 scan_pwr_format;
4943         u32 scan_rpt_mode;
4944         u32 scan_bin_scale;
4945         u32 scan_dbm_adj;
4946         u32 scan_chn_mask;
4947 };
4948
4949 #define WMI_SPECTRAL_ENABLE_DEFAULT              0
4950 #define WMI_SPECTRAL_COUNT_DEFAULT               0
4951 #define WMI_SPECTRAL_PERIOD_DEFAULT             35
4952 #define WMI_SPECTRAL_PRIORITY_DEFAULT            1
4953 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
4954 #define WMI_SPECTRAL_GC_ENA_DEFAULT              1
4955 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
4956 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
4957 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
4958 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
4959 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
4960 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
4961 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
4962 #define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
4963 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
4964 #define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
4965 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
4966 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
4967 #define WMI_SPECTRAL_CHN_MASK_DEFAULT            1
4968
4969 struct wmi_vdev_spectral_enable_cmd {
4970         __le32 vdev_id;
4971         __le32 trigger_cmd;
4972         __le32 enable_cmd;
4973 } __packed;
4974
4975 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
4976 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
4977 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
4978 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2
4979
4980 /* Beacon processing related command and event structures */
4981 struct wmi_bcn_tx_hdr {
4982         __le32 vdev_id;
4983         __le32 tx_rate;
4984         __le32 tx_power;
4985         __le32 bcn_len;
4986 } __packed;
4987
4988 struct wmi_bcn_tx_cmd {
4989         struct wmi_bcn_tx_hdr hdr;
4990         u8 *bcn[0];
4991 } __packed;
4992
4993 struct wmi_bcn_tx_arg {
4994         u32 vdev_id;
4995         u32 tx_rate;
4996         u32 tx_power;
4997         u32 bcn_len;
4998         const void *bcn;
4999 };
5000
5001 enum wmi_bcn_tx_ref_flags {
5002         WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5003         WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5004 };
5005
5006 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5007  * chainmask yields no beacons on the air at all.
5008  */
5009 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5010
5011 struct wmi_bcn_tx_ref_cmd {
5012         __le32 vdev_id;
5013         __le32 data_len;
5014         /* physical address of the frame - dma pointer */
5015         __le32 data_ptr;
5016         /* id for host to track */
5017         __le32 msdu_id;
5018         /* frame ctrl to setup PPDU desc */
5019         __le32 frame_control;
5020         /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5021         __le32 flags;
5022         /* introduced in 10.2 */
5023         __le32 antenna_mask;
5024 } __packed;
5025
5026 /* Beacon filter */
5027 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
5028 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
5029 #define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
5030 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5031 #define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
5032
5033 struct wmi_bcn_filter_rx_cmd {
5034         /* Filter ID */
5035         __le32 bcn_filter_id;
5036         /* Filter type - wmi_bcn_filter */
5037         __le32 bcn_filter;
5038         /* Buffer len */
5039         __le32 bcn_filter_len;
5040         /* Filter info (threshold, BSSID, RSSI) */
5041         u8 *bcn_filter_buf;
5042 } __packed;
5043
5044 /* Capabilities and IEs to be passed to firmware */
5045 struct wmi_bcn_prb_info {
5046         /* Capabilities */
5047         __le32 caps;
5048         /* ERP info */
5049         __le32 erp;
5050         /* Advanced capabilities */
5051         /* HT capabilities */
5052         /* HT Info */
5053         /* ibss_dfs */
5054         /* wpa Info */
5055         /* rsn Info */
5056         /* rrm info */
5057         /* ath_ext */
5058         /* app IE */
5059 } __packed;
5060
5061 struct wmi_bcn_tmpl_cmd {
5062         /* unique id identifying the VDEV, generated by the caller */
5063         __le32 vdev_id;
5064         /* TIM IE offset from the beginning of the template. */
5065         __le32 tim_ie_offset;
5066         /* beacon probe capabilities and IEs */
5067         struct wmi_bcn_prb_info bcn_prb_info;
5068         /* beacon buffer length */
5069         __le32 buf_len;
5070         /* variable length data */
5071         u8 data[1];
5072 } __packed;
5073
5074 struct wmi_prb_tmpl_cmd {
5075         /* unique id identifying the VDEV, generated by the caller */
5076         __le32 vdev_id;
5077         /* beacon probe capabilities and IEs */
5078         struct wmi_bcn_prb_info bcn_prb_info;
5079         /* beacon buffer length */
5080         __le32 buf_len;
5081         /* Variable length data */
5082         u8 data[1];
5083 } __packed;
5084
5085 enum wmi_sta_ps_mode {
5086         /* enable power save for the given STA VDEV */
5087         WMI_STA_PS_MODE_DISABLED = 0,
5088         /* disable power save  for a given STA VDEV */
5089         WMI_STA_PS_MODE_ENABLED = 1,
5090 };
5091
5092 struct wmi_sta_powersave_mode_cmd {
5093         /* unique id identifying the VDEV, generated by the caller */
5094         __le32 vdev_id;
5095
5096         /*
5097          * Power save mode
5098          * (see enum wmi_sta_ps_mode)
5099          */
5100         __le32 sta_ps_mode;
5101 } __packed;
5102
5103 enum wmi_csa_offload_en {
5104         WMI_CSA_OFFLOAD_DISABLE = 0,
5105         WMI_CSA_OFFLOAD_ENABLE = 1,
5106 };
5107
5108 struct wmi_csa_offload_enable_cmd {
5109         __le32 vdev_id;
5110         __le32 csa_offload_enable;
5111 } __packed;
5112
5113 struct wmi_csa_offload_chanswitch_cmd {
5114         __le32 vdev_id;
5115         struct wmi_channel chan;
5116 } __packed;
5117
5118 /*
5119  * This parameter controls the policy for retrieving frames from AP while the
5120  * STA is in sleep state.
5121  *
5122  * Only takes affect if the sta_ps_mode is enabled
5123  */
5124 enum wmi_sta_ps_param_rx_wake_policy {
5125         /*
5126          * Wake up when ever there is an  RX activity on the VDEV. In this mode
5127          * the Power save SM(state machine) will come out of sleep by either
5128          * sending null frame (or) a data frame (with PS==0) in response to TIM
5129          * bit set in the received beacon frame from AP.
5130          */
5131         WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5132
5133         /*
5134          * Here the power save state machine will not wakeup in response to TIM
5135          * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5136          * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
5137          * access categories are delivery-enabled, the station will send a
5138          * UAPSD trigger frame, otherwise it will send a PS-Poll.
5139          */
5140         WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5141 };
5142
5143 /*
5144  * Number of tx frames/beacon  that cause the power save SM to wake up.
5145  *
5146  * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5147  * meaning, It will cause the SM to never wake up. This is useful if you want
5148  * to keep the system to sleep all the time for some kind of test mode . host
5149  * can change this parameter any time.  It will affect at the next tx frame.
5150  */
5151 enum wmi_sta_ps_param_tx_wake_threshold {
5152         WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5153         WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5154
5155         /*
5156          * Values greater than one indicate that many TX attempts per beacon
5157          * interval before the STA will wake up
5158          */
5159 };
5160
5161 /*
5162  * The maximum number of PS-Poll frames the FW will send in response to
5163  * traffic advertised in TIM before waking up (by sending a null frame with PS
5164  * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5165  * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5166  * parameter is used when the RX wake policy is
5167  * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5168  * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5169  */
5170 enum wmi_sta_ps_param_pspoll_count {
5171         WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5172         /*
5173          * Values greater than 0 indicate the maximum numer of PS-Poll frames
5174          * FW will send before waking up.
5175          */
5176
5177         /* When u-APSD is enabled the firmware will be very reluctant to exit
5178          * STA PS. This could result in very poor Rx performance with STA doing
5179          * PS-Poll for each and every buffered frame. This value is a bit
5180          * arbitrary.
5181          */
5182         WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5183 };
5184
5185 /*
5186  * This will include the delivery and trigger enabled state for every AC.
5187  * This is the negotiated state with AP. The host MLME needs to set this based
5188  * on AP capability and the state Set in the association request by the
5189  * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5190  */
5191 #define WMI_UAPSD_AC_TYPE_DELI 0
5192 #define WMI_UAPSD_AC_TYPE_TRIG 1
5193
5194 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5195         ((type ==  WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1)))
5196
5197 enum wmi_sta_ps_param_uapsd {
5198         WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5199         WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5200         WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5201         WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5202         WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5203         WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5204         WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5205         WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5206 };
5207
5208 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5209
5210 struct wmi_sta_uapsd_auto_trig_param {
5211         __le32 wmm_ac;
5212         __le32 user_priority;
5213         __le32 service_interval;
5214         __le32 suspend_interval;
5215         __le32 delay_interval;
5216 };
5217
5218 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5219         __le32 vdev_id;
5220         struct wmi_mac_addr peer_macaddr;
5221         __le32 num_ac;
5222 };
5223
5224 struct wmi_sta_uapsd_auto_trig_arg {
5225         u32 wmm_ac;
5226         u32 user_priority;
5227         u32 service_interval;
5228         u32 suspend_interval;
5229         u32 delay_interval;
5230 };
5231
5232 enum wmi_sta_powersave_param {
5233         /*
5234          * Controls how frames are retrievd from AP while STA is sleeping
5235          *
5236          * (see enum wmi_sta_ps_param_rx_wake_policy)
5237          */
5238         WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5239
5240         /*
5241          * The STA will go active after this many TX
5242          *
5243          * (see enum wmi_sta_ps_param_tx_wake_threshold)
5244          */
5245         WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5246
5247         /*
5248          * Number of PS-Poll to send before STA wakes up
5249          *
5250          * (see enum wmi_sta_ps_param_pspoll_count)
5251          *
5252          */
5253         WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5254
5255         /*
5256          * TX/RX inactivity time in msec before going to sleep.
5257          *
5258          * The power save SM will monitor tx/rx activity on the VDEV, if no
5259          * activity for the specified msec of the parameter the Power save
5260          * SM will go to sleep.
5261          */
5262         WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5263
5264         /*
5265          * Set uapsd configuration.
5266          *
5267          * (see enum wmi_sta_ps_param_uapsd)
5268          */
5269         WMI_STA_PS_PARAM_UAPSD = 4,
5270 };
5271
5272 struct wmi_sta_powersave_param_cmd {
5273         __le32 vdev_id;
5274         __le32 param_id; /* %WMI_STA_PS_PARAM_ */
5275         __le32 param_value;
5276 } __packed;
5277
5278 /* No MIMO power save */
5279 #define WMI_STA_MIMO_PS_MODE_DISABLE
5280 /* mimo powersave mode static*/
5281 #define WMI_STA_MIMO_PS_MODE_STATIC
5282 /* mimo powersave mode dynamic */
5283 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
5284
5285 struct wmi_sta_mimo_ps_mode_cmd {
5286         /* unique id identifying the VDEV, generated by the caller */
5287         __le32 vdev_id;
5288         /* mimo powersave mode as defined above */
5289         __le32 mimo_pwrsave_mode;
5290 } __packed;
5291
5292 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
5293 enum wmi_ap_ps_param_uapsd {
5294         WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5295         WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5296         WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5297         WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5298         WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5299         WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5300         WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5301         WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5302 };
5303
5304 /* U-APSD maximum service period of peer station */
5305 enum wmi_ap_ps_peer_param_max_sp {
5306         WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
5307         WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
5308         WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
5309         WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
5310         MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
5311 };
5312
5313 /*
5314  * AP power save parameter
5315  * Set a power save specific parameter for a peer station
5316  */
5317 enum wmi_ap_ps_peer_param {
5318         /* Set uapsd configuration for a given peer.
5319          *
5320          * Include the delivery and trigger enabled state for every AC.
5321          * The host  MLME needs to set this based on AP capability and stations
5322          * request Set in the association request  received from the station.
5323          *
5324          * Lower 8 bits of the value specify the UAPSD configuration.
5325          *
5326          * (see enum wmi_ap_ps_param_uapsd)
5327          * The default value is 0.
5328          */
5329         WMI_AP_PS_PEER_PARAM_UAPSD = 0,
5330
5331         /*
5332          * Set the service period for a UAPSD capable station
5333          *
5334          * The service period from wme ie in the (re)assoc request frame.
5335          *
5336          * (see enum wmi_ap_ps_peer_param_max_sp)
5337          */
5338         WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
5339
5340         /* Time in seconds for aging out buffered frames for STA in PS */
5341         WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
5342 };
5343
5344 struct wmi_ap_ps_peer_cmd {
5345         /* unique id identifying the VDEV, generated by the caller */
5346         __le32 vdev_id;
5347
5348         /* peer MAC address */
5349         struct wmi_mac_addr peer_macaddr;
5350
5351         /* AP powersave param (see enum wmi_ap_ps_peer_param) */
5352         __le32 param_id;
5353
5354         /* AP powersave param value */
5355         __le32 param_value;
5356 } __packed;
5357
5358 /* 128 clients = 4 words */
5359 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
5360
5361 struct wmi_tim_info {
5362         __le32 tim_len;
5363         __le32 tim_mcast;
5364         __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
5365         __le32 tim_changed;
5366         __le32 tim_num_ps_pending;
5367 } __packed;
5368
5369 struct wmi_tim_info_arg {
5370         __le32 tim_len;
5371         __le32 tim_mcast;
5372         const __le32 *tim_bitmap;
5373         __le32 tim_changed;
5374         __le32 tim_num_ps_pending;
5375 } __packed;
5376
5377 /* Maximum number of NOA Descriptors supported */
5378 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
5379 #define WMI_P2P_OPPPS_ENABLE_BIT        BIT(0)
5380 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET   1
5381 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
5382
5383 struct wmi_p2p_noa_info {
5384         /* Bit 0 - Flag to indicate an update in NOA schedule
5385            Bits 7-1 - Reserved */
5386         u8 changed;
5387         /* NOA index */
5388         u8 index;
5389         /* Bit 0 - Opp PS state of the AP
5390            Bits 1-7 - Ctwindow in TUs */
5391         u8 ctwindow_oppps;
5392         /* Number of NOA descriptors */
5393         u8 num_descriptors;
5394
5395         struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
5396 } __packed;
5397
5398 struct wmi_bcn_info {
5399         struct wmi_tim_info tim_info;
5400         struct wmi_p2p_noa_info p2p_noa_info;
5401 } __packed;
5402
5403 struct wmi_host_swba_event {
5404         __le32 vdev_map;
5405         struct wmi_bcn_info bcn_info[0];
5406 } __packed;
5407
5408 /* 16 words = 512 client + 1 word = for guard */
5409 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
5410
5411 struct wmi_10_4_tim_info {
5412         __le32 tim_len;
5413         __le32 tim_mcast;
5414         __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
5415         __le32 tim_changed;
5416         __le32 tim_num_ps_pending;
5417 } __packed;
5418
5419 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
5420
5421 struct wmi_10_4_p2p_noa_info {
5422         /* Bit 0 - Flag to indicate an update in NOA schedule
5423          * Bits 7-1 - Reserved
5424          */
5425         u8 changed;
5426         /* NOA index */
5427         u8 index;
5428         /* Bit 0 - Opp PS state of the AP
5429          * Bits 1-7 - Ctwindow in TUs
5430          */
5431         u8 ctwindow_oppps;
5432         /* Number of NOA descriptors */
5433         u8 num_descriptors;
5434
5435         struct wmi_p2p_noa_descriptor
5436                 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
5437 } __packed;
5438
5439 struct wmi_10_4_bcn_info {
5440         struct wmi_10_4_tim_info tim_info;
5441         struct wmi_10_4_p2p_noa_info p2p_noa_info;
5442 } __packed;
5443
5444 struct wmi_10_4_host_swba_event {
5445         __le32 vdev_map;
5446         struct wmi_10_4_bcn_info bcn_info[0];
5447 } __packed;
5448
5449 #define WMI_MAX_AP_VDEV 16
5450
5451 struct wmi_tbtt_offset_event {
5452         __le32 vdev_map;
5453         __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
5454 } __packed;
5455
5456 struct wmi_peer_create_cmd {
5457         __le32 vdev_id;
5458         struct wmi_mac_addr peer_macaddr;
5459 } __packed;
5460
5461 enum wmi_peer_type {
5462         WMI_PEER_TYPE_DEFAULT = 0,
5463         WMI_PEER_TYPE_BSS = 1,
5464         WMI_PEER_TYPE_TDLS = 2,
5465 };
5466
5467 struct wmi_peer_delete_cmd {
5468         __le32 vdev_id;
5469         struct wmi_mac_addr peer_macaddr;
5470 } __packed;
5471
5472 struct wmi_peer_flush_tids_cmd {
5473         __le32 vdev_id;
5474         struct wmi_mac_addr peer_macaddr;
5475         __le32 peer_tid_bitmap;
5476 } __packed;
5477
5478 struct wmi_fixed_rate {
5479         /*
5480          * rate mode . 0: disable fixed rate (auto rate)
5481          *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
5482          *   2: ht20 11n rate  specified as mcs index
5483          *   3: ht40 11n rate  specified as mcs index
5484          */
5485         __le32  rate_mode;
5486         /*
5487          * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
5488          * and series 3 is stored at byte 3 (MSB)
5489          */
5490         __le32  rate_series;
5491         /*
5492          * 4 retry counts for 4 rate series. retry count for rate 0 is stored
5493          * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
5494          * (MSB)
5495          */
5496         __le32  rate_retries;
5497 } __packed;
5498
5499 struct wmi_peer_fixed_rate_cmd {
5500         /* unique id identifying the VDEV, generated by the caller */
5501         __le32 vdev_id;
5502         /* peer MAC address */
5503         struct wmi_mac_addr peer_macaddr;
5504         /* fixed rate */
5505         struct wmi_fixed_rate peer_fixed_rate;
5506 } __packed;
5507
5508 #define WMI_MGMT_TID    17
5509
5510 struct wmi_addba_clear_resp_cmd {
5511         /* unique id identifying the VDEV, generated by the caller */
5512         __le32 vdev_id;
5513         /* peer MAC address */
5514         struct wmi_mac_addr peer_macaddr;
5515 } __packed;
5516
5517 struct wmi_addba_send_cmd {
5518         /* unique id identifying the VDEV, generated by the caller */
5519         __le32 vdev_id;
5520         /* peer MAC address */
5521         struct wmi_mac_addr peer_macaddr;
5522         /* Tid number */
5523         __le32 tid;
5524         /* Buffer/Window size*/
5525         __le32 buffersize;
5526 } __packed;
5527
5528 struct wmi_delba_send_cmd {
5529         /* unique id identifying the VDEV, generated by the caller */
5530         __le32 vdev_id;
5531         /* peer MAC address */
5532         struct wmi_mac_addr peer_macaddr;
5533         /* Tid number */
5534         __le32 tid;
5535         /* Is Initiator */
5536         __le32 initiator;
5537         /* Reason code */
5538         __le32 reasoncode;
5539 } __packed;
5540
5541 struct wmi_addba_setresponse_cmd {
5542         /* unique id identifying the vdev, generated by the caller */
5543         __le32 vdev_id;
5544         /* peer mac address */
5545         struct wmi_mac_addr peer_macaddr;
5546         /* Tid number */
5547         __le32 tid;
5548         /* status code */
5549         __le32 statuscode;
5550 } __packed;
5551
5552 struct wmi_send_singleamsdu_cmd {
5553         /* unique id identifying the vdev, generated by the caller */
5554         __le32 vdev_id;
5555         /* peer mac address */
5556         struct wmi_mac_addr peer_macaddr;
5557         /* Tid number */
5558         __le32 tid;
5559 } __packed;
5560
5561 enum wmi_peer_smps_state {
5562         WMI_PEER_SMPS_PS_NONE = 0x0,
5563         WMI_PEER_SMPS_STATIC  = 0x1,
5564         WMI_PEER_SMPS_DYNAMIC = 0x2
5565 };
5566
5567 enum wmi_peer_chwidth {
5568         WMI_PEER_CHWIDTH_20MHZ = 0,
5569         WMI_PEER_CHWIDTH_40MHZ = 1,
5570         WMI_PEER_CHWIDTH_80MHZ = 2,
5571 };
5572
5573 enum wmi_peer_param {
5574         WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
5575         WMI_PEER_AMPDU      = 0x2,
5576         WMI_PEER_AUTHORIZE  = 0x3,
5577         WMI_PEER_CHAN_WIDTH = 0x4,
5578         WMI_PEER_NSS        = 0x5,
5579         WMI_PEER_USE_4ADDR  = 0x6,
5580         WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
5581 };
5582
5583 struct wmi_peer_set_param_cmd {
5584         __le32 vdev_id;
5585         struct wmi_mac_addr peer_macaddr;
5586         __le32 param_id;
5587         __le32 param_value;
5588 } __packed;
5589
5590 #define MAX_SUPPORTED_RATES 128
5591
5592 struct wmi_rate_set {
5593         /* total number of rates */
5594         __le32 num_rates;
5595         /*
5596          * rates (each 8bit value) packed into a 32 bit word.
5597          * the rates are filled from least significant byte to most
5598          * significant byte.
5599          */
5600         __le32 rates[(MAX_SUPPORTED_RATES/4)+1];
5601 } __packed;
5602
5603 struct wmi_rate_set_arg {
5604         unsigned int num_rates;
5605         u8 rates[MAX_SUPPORTED_RATES];
5606 };
5607
5608 /*
5609  * NOTE: It would bea good idea to represent the Tx MCS
5610  * info in one word and Rx in another word. This is split
5611  * into multiple words for convenience
5612  */
5613 struct wmi_vht_rate_set {
5614         __le32 rx_max_rate; /* Max Rx data rate */
5615         __le32 rx_mcs_set;  /* Negotiated RX VHT rates */
5616         __le32 tx_max_rate; /* Max Tx data rate */
5617         __le32 tx_mcs_set;  /* Negotiated TX VHT rates */
5618 } __packed;
5619
5620 struct wmi_vht_rate_set_arg {
5621         u32 rx_max_rate;
5622         u32 rx_mcs_set;
5623         u32 tx_max_rate;
5624         u32 tx_mcs_set;
5625 };
5626
5627 struct wmi_peer_set_rates_cmd {
5628         /* peer MAC address */
5629         struct wmi_mac_addr peer_macaddr;
5630         /* legacy rate set */
5631         struct wmi_rate_set peer_legacy_rates;
5632         /* ht rate set */
5633         struct wmi_rate_set peer_ht_rates;
5634 } __packed;
5635
5636 struct wmi_peer_set_q_empty_callback_cmd {
5637         /* unique id identifying the VDEV, generated by the caller */
5638         __le32 vdev_id;
5639         /* peer MAC address */
5640         struct wmi_mac_addr peer_macaddr;
5641         __le32 callback_enable;
5642 } __packed;
5643
5644 #define WMI_PEER_AUTH           0x00000001
5645 #define WMI_PEER_QOS            0x00000002
5646 #define WMI_PEER_NEED_PTK_4_WAY 0x00000004
5647 #define WMI_PEER_NEED_GTK_2_WAY 0x00000010
5648 #define WMI_PEER_APSD           0x00000800
5649 #define WMI_PEER_HT             0x00001000
5650 #define WMI_PEER_40MHZ          0x00002000
5651 #define WMI_PEER_STBC           0x00008000
5652 #define WMI_PEER_LDPC           0x00010000
5653 #define WMI_PEER_DYN_MIMOPS     0x00020000
5654 #define WMI_PEER_STATIC_MIMOPS  0x00040000
5655 #define WMI_PEER_SPATIAL_MUX    0x00200000
5656 #define WMI_PEER_VHT            0x02000000
5657 #define WMI_PEER_80MHZ          0x04000000
5658 #define WMI_PEER_VHT_2G         0x08000000
5659
5660 /*
5661  * Peer rate capabilities.
5662  *
5663  * This is of interest to the ratecontrol
5664  * module which resides in the firmware. The bit definitions are
5665  * consistent with that defined in if_athrate.c.
5666  */
5667 #define WMI_RC_DS_FLAG          0x01
5668 #define WMI_RC_CW40_FLAG        0x02
5669 #define WMI_RC_SGI_FLAG         0x04
5670 #define WMI_RC_HT_FLAG          0x08
5671 #define WMI_RC_RTSCTS_FLAG      0x10
5672 #define WMI_RC_TX_STBC_FLAG     0x20
5673 #define WMI_RC_RX_STBC_FLAG     0xC0
5674 #define WMI_RC_RX_STBC_FLAG_S   6
5675 #define WMI_RC_WEP_TKIP_FLAG    0x100
5676 #define WMI_RC_TS_FLAG          0x200
5677 #define WMI_RC_UAPSD_FLAG       0x400
5678
5679 /* Maximum listen interval supported by hw in units of beacon interval */
5680 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
5681
5682 struct wmi_common_peer_assoc_complete_cmd {
5683         struct wmi_mac_addr peer_macaddr;
5684         __le32 vdev_id;
5685         __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
5686         __le32 peer_associd; /* 16 LSBs */
5687         __le32 peer_flags;
5688         __le32 peer_caps; /* 16 LSBs */
5689         __le32 peer_listen_intval;
5690         __le32 peer_ht_caps;
5691         __le32 peer_max_mpdu;
5692         __le32 peer_mpdu_density; /* 0..16 */
5693         __le32 peer_rate_caps;
5694         struct wmi_rate_set peer_legacy_rates;
5695         struct wmi_rate_set peer_ht_rates;
5696         __le32 peer_nss; /* num of spatial streams */
5697         __le32 peer_vht_caps;
5698         __le32 peer_phymode;
5699         struct wmi_vht_rate_set peer_vht_rates;
5700 };
5701
5702 struct wmi_main_peer_assoc_complete_cmd {
5703         struct wmi_common_peer_assoc_complete_cmd cmd;
5704
5705         /* HT Operation Element of the peer. Five bytes packed in 2
5706          *  INT32 array and filled from lsb to msb. */
5707         __le32 peer_ht_info[2];
5708 } __packed;
5709
5710 struct wmi_10_1_peer_assoc_complete_cmd {
5711         struct wmi_common_peer_assoc_complete_cmd cmd;
5712 } __packed;
5713
5714 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
5715 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
5716 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
5717 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
5718
5719 struct wmi_10_2_peer_assoc_complete_cmd {
5720         struct wmi_common_peer_assoc_complete_cmd cmd;
5721         __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
5722 } __packed;
5723
5724 struct wmi_peer_assoc_complete_arg {
5725         u8 addr[ETH_ALEN];
5726         u32 vdev_id;
5727         bool peer_reassoc;
5728         u16 peer_aid;
5729         u32 peer_flags; /* see %WMI_PEER_ */
5730         u16 peer_caps;
5731         u32 peer_listen_intval;
5732         u32 peer_ht_caps;
5733         u32 peer_max_mpdu;
5734         u32 peer_mpdu_density; /* 0..16 */
5735         u32 peer_rate_caps; /* see %WMI_RC_ */
5736         struct wmi_rate_set_arg peer_legacy_rates;
5737         struct wmi_rate_set_arg peer_ht_rates;
5738         u32 peer_num_spatial_streams;
5739         u32 peer_vht_caps;
5740         enum wmi_phy_mode peer_phymode;
5741         struct wmi_vht_rate_set_arg peer_vht_rates;
5742 };
5743
5744 struct wmi_peer_add_wds_entry_cmd {
5745         /* peer MAC address */
5746         struct wmi_mac_addr peer_macaddr;
5747         /* wds MAC addr */
5748         struct wmi_mac_addr wds_macaddr;
5749 } __packed;
5750
5751 struct wmi_peer_remove_wds_entry_cmd {
5752         /* wds MAC addr */
5753         struct wmi_mac_addr wds_macaddr;
5754 } __packed;
5755
5756 struct wmi_peer_q_empty_callback_event {
5757         /* peer MAC address */
5758         struct wmi_mac_addr peer_macaddr;
5759 } __packed;
5760
5761 /*
5762  * Channel info WMI event
5763  */
5764 struct wmi_chan_info_event {
5765         __le32 err_code;
5766         __le32 freq;
5767         __le32 cmd_flags;
5768         __le32 noise_floor;
5769         __le32 rx_clear_count;
5770         __le32 cycle_count;
5771 } __packed;
5772
5773 struct wmi_10_4_chan_info_event {
5774         __le32 err_code;
5775         __le32 freq;
5776         __le32 cmd_flags;
5777         __le32 noise_floor;
5778         __le32 rx_clear_count;
5779         __le32 cycle_count;
5780         __le32 chan_tx_pwr_range;
5781         __le32 chan_tx_pwr_tp;
5782         __le32 rx_frame_count;
5783 } __packed;
5784
5785 struct wmi_peer_sta_kickout_event {
5786         struct wmi_mac_addr peer_macaddr;
5787 } __packed;
5788
5789 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
5790 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
5791
5792 /* Beacon filter wmi command info */
5793 #define BCN_FLT_MAX_SUPPORTED_IES       256
5794 #define BCN_FLT_MAX_ELEMS_IE_LIST       (BCN_FLT_MAX_SUPPORTED_IES / 32)
5795
5796 struct bss_bcn_stats {
5797         __le32 vdev_id;
5798         __le32 bss_bcnsdropped;
5799         __le32 bss_bcnsdelivered;
5800 } __packed;
5801
5802 struct bcn_filter_stats {
5803         __le32 bcns_dropped;
5804         __le32 bcns_delivered;
5805         __le32 activefilters;
5806         struct bss_bcn_stats bss_stats;
5807 } __packed;
5808
5809 struct wmi_add_bcn_filter_cmd {
5810         u32 vdev_id;
5811         u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
5812 } __packed;
5813
5814 enum wmi_sta_keepalive_method {
5815         WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
5816         WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
5817 };
5818
5819 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
5820
5821 /* Firmware crashes if keepalive interval exceeds this limit */
5822 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
5823
5824 /* note: ip4 addresses are in network byte order, i.e. big endian */
5825 struct wmi_sta_keepalive_arp_resp {
5826         __be32 src_ip4_addr;
5827         __be32 dest_ip4_addr;
5828         struct wmi_mac_addr dest_mac_addr;
5829 } __packed;
5830
5831 struct wmi_sta_keepalive_cmd {
5832         __le32 vdev_id;
5833         __le32 enabled;
5834         __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
5835         __le32 interval; /* in seconds */
5836         struct wmi_sta_keepalive_arp_resp arp_resp;
5837 } __packed;
5838
5839 struct wmi_sta_keepalive_arg {
5840         u32 vdev_id;
5841         u32 enabled;
5842         u32 method;
5843         u32 interval;
5844         __be32 src_ip4_addr;
5845         __be32 dest_ip4_addr;
5846         const u8 dest_mac_addr[ETH_ALEN];
5847 };
5848
5849 enum wmi_force_fw_hang_type {
5850         WMI_FORCE_FW_HANG_ASSERT = 1,
5851         WMI_FORCE_FW_HANG_NO_DETECT,
5852         WMI_FORCE_FW_HANG_CTRL_EP_FULL,
5853         WMI_FORCE_FW_HANG_EMPTY_POINT,
5854         WMI_FORCE_FW_HANG_STACK_OVERFLOW,
5855         WMI_FORCE_FW_HANG_INFINITE_LOOP,
5856 };
5857
5858 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
5859
5860 struct wmi_force_fw_hang_cmd {
5861         __le32 type;
5862         __le32 delay_ms;
5863 } __packed;
5864
5865 enum ath10k_dbglog_level {
5866         ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
5867         ATH10K_DBGLOG_LEVEL_INFO = 1,
5868         ATH10K_DBGLOG_LEVEL_WARN = 2,
5869         ATH10K_DBGLOG_LEVEL_ERR = 3,
5870 };
5871
5872 /* VAP ids to enable dbglog */
5873 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB           0
5874 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK          0x0000ffff
5875
5876 /* to enable dbglog in the firmware */
5877 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB  16
5878 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
5879
5880 /* timestamp resolution */
5881 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB        17
5882 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK       0x000E0000
5883
5884 /* number of queued messages before sending them to the host */
5885 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB       20
5886 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK      0x0ff00000
5887
5888 /*
5889  * Log levels to enable. This defines the minimum level to enable, this is
5890  * not a bitmask. See enum ath10k_dbglog_level for the values.
5891  */
5892 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB           28
5893 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK          0x70000000
5894
5895 /*
5896  * Note: this is a cleaned up version of a struct firmware uses. For
5897  * example, config_valid was hidden inside an array.
5898  */
5899 struct wmi_dbglog_cfg_cmd {
5900         /* bitmask to hold mod id config*/
5901         __le32 module_enable;
5902
5903         /* see ATH10K_DBGLOG_CFG_ */
5904         __le32 config_enable;
5905
5906         /* mask of module id bits to be changed */
5907         __le32 module_valid;
5908
5909         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
5910         __le32 config_valid;
5911 } __packed;
5912
5913 enum wmi_roam_reason {
5914         WMI_ROAM_REASON_BETTER_AP = 1,
5915         WMI_ROAM_REASON_BEACON_MISS = 2,
5916         WMI_ROAM_REASON_LOW_RSSI = 3,
5917         WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
5918         WMI_ROAM_REASON_HO_FAILED = 5,
5919
5920         /* keep last */
5921         WMI_ROAM_REASON_MAX,
5922 };
5923
5924 struct wmi_roam_ev {
5925         __le32 vdev_id;
5926         __le32 reason;
5927 } __packed;
5928
5929 #define ATH10K_FRAGMT_THRESHOLD_MIN     540
5930 #define ATH10K_FRAGMT_THRESHOLD_MAX     2346
5931
5932 #define WMI_MAX_EVENT 0x1000
5933 /* Maximum number of pending TXed WMI packets */
5934 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
5935
5936 /* By default disable power save for IBSS */
5937 #define ATH10K_DEFAULT_ATIM 0
5938
5939 #define WMI_MAX_MEM_REQS 16
5940
5941 struct wmi_scan_ev_arg {
5942         __le32 event_type; /* %WMI_SCAN_EVENT_ */
5943         __le32 reason; /* %WMI_SCAN_REASON_ */
5944         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
5945         __le32 scan_req_id;
5946         __le32 scan_id;
5947         __le32 vdev_id;
5948 };
5949
5950 struct wmi_mgmt_rx_ev_arg {
5951         __le32 channel;
5952         __le32 snr;
5953         __le32 rate;
5954         __le32 phy_mode;
5955         __le32 buf_len;
5956         __le32 status; /* %WMI_RX_STATUS_ */
5957 };
5958
5959 struct wmi_ch_info_ev_arg {
5960         __le32 err_code;
5961         __le32 freq;
5962         __le32 cmd_flags;
5963         __le32 noise_floor;
5964         __le32 rx_clear_count;
5965         __le32 cycle_count;
5966         __le32 chan_tx_pwr_range;
5967         __le32 chan_tx_pwr_tp;
5968         __le32 rx_frame_count;
5969 };
5970
5971 struct wmi_vdev_start_ev_arg {
5972         __le32 vdev_id;
5973         __le32 req_id;
5974         __le32 resp_type; /* %WMI_VDEV_RESP_ */
5975         __le32 status;
5976 };
5977
5978 struct wmi_peer_kick_ev_arg {
5979         const u8 *mac_addr;
5980 };
5981
5982 struct wmi_swba_ev_arg {
5983         __le32 vdev_map;
5984         struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
5985         const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
5986 };
5987
5988 struct wmi_phyerr_ev_arg {
5989         u32 tsf_timestamp;
5990         u16 freq1;
5991         u16 freq2;
5992         u8 rssi_combined;
5993         u8 chan_width_mhz;
5994         u8 phy_err_code;
5995         u16 nf_chains[4];
5996         u32 buf_len;
5997         const u8 *buf;
5998         u8 hdr_len;
5999 };
6000
6001 struct wmi_phyerr_hdr_arg {
6002         u32 num_phyerrs;
6003         u32 tsf_l32;
6004         u32 tsf_u32;
6005         u32 buf_len;
6006         const void *phyerrs;
6007 };
6008
6009 struct wmi_svc_rdy_ev_arg {
6010         __le32 min_tx_power;
6011         __le32 max_tx_power;
6012         __le32 ht_cap;
6013         __le32 vht_cap;
6014         __le32 sw_ver0;
6015         __le32 sw_ver1;
6016         __le32 fw_build;
6017         __le32 phy_capab;
6018         __le32 num_rf_chains;
6019         __le32 eeprom_rd;
6020         __le32 num_mem_reqs;
6021         const __le32 *service_map;
6022         size_t service_map_len;
6023         const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6024 };
6025
6026 struct wmi_rdy_ev_arg {
6027         __le32 sw_version;
6028         __le32 abi_version;
6029         __le32 status;
6030         const u8 *mac_addr;
6031 };
6032
6033 struct wmi_roam_ev_arg {
6034         __le32 vdev_id;
6035         __le32 reason;
6036         __le32 rssi;
6037 };
6038
6039 struct wmi_pdev_temperature_event {
6040         /* temperature value in Celcius degree */
6041         __le32 temperature;
6042 } __packed;
6043
6044 /* WOW structures */
6045 enum wmi_wow_wakeup_event {
6046         WOW_BMISS_EVENT = 0,
6047         WOW_BETTER_AP_EVENT,
6048         WOW_DEAUTH_RECVD_EVENT,
6049         WOW_MAGIC_PKT_RECVD_EVENT,
6050         WOW_GTK_ERR_EVENT,
6051         WOW_FOURWAY_HSHAKE_EVENT,
6052         WOW_EAPOL_RECVD_EVENT,
6053         WOW_NLO_DETECTED_EVENT,
6054         WOW_DISASSOC_RECVD_EVENT,
6055         WOW_PATTERN_MATCH_EVENT,
6056         WOW_CSA_IE_EVENT,
6057         WOW_PROBE_REQ_WPS_IE_EVENT,
6058         WOW_AUTH_REQ_EVENT,
6059         WOW_ASSOC_REQ_EVENT,
6060         WOW_HTT_EVENT,
6061         WOW_RA_MATCH_EVENT,
6062         WOW_HOST_AUTO_SHUTDOWN_EVENT,
6063         WOW_IOAC_MAGIC_EVENT,
6064         WOW_IOAC_SHORT_EVENT,
6065         WOW_IOAC_EXTEND_EVENT,
6066         WOW_IOAC_TIMER_EVENT,
6067         WOW_DFS_PHYERR_RADAR_EVENT,
6068         WOW_BEACON_EVENT,
6069         WOW_CLIENT_KICKOUT_EVENT,
6070         WOW_EVENT_MAX,
6071 };
6072
6073 #define C2S(x) case x: return #x
6074
6075 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6076 {
6077         switch (ev) {
6078         C2S(WOW_BMISS_EVENT);
6079         C2S(WOW_BETTER_AP_EVENT);
6080         C2S(WOW_DEAUTH_RECVD_EVENT);
6081         C2S(WOW_MAGIC_PKT_RECVD_EVENT);
6082         C2S(WOW_GTK_ERR_EVENT);
6083         C2S(WOW_FOURWAY_HSHAKE_EVENT);
6084         C2S(WOW_EAPOL_RECVD_EVENT);
6085         C2S(WOW_NLO_DETECTED_EVENT);
6086         C2S(WOW_DISASSOC_RECVD_EVENT);
6087         C2S(WOW_PATTERN_MATCH_EVENT);
6088         C2S(WOW_CSA_IE_EVENT);
6089         C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
6090         C2S(WOW_AUTH_REQ_EVENT);
6091         C2S(WOW_ASSOC_REQ_EVENT);
6092         C2S(WOW_HTT_EVENT);
6093         C2S(WOW_RA_MATCH_EVENT);
6094         C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
6095         C2S(WOW_IOAC_MAGIC_EVENT);
6096         C2S(WOW_IOAC_SHORT_EVENT);
6097         C2S(WOW_IOAC_EXTEND_EVENT);
6098         C2S(WOW_IOAC_TIMER_EVENT);
6099         C2S(WOW_DFS_PHYERR_RADAR_EVENT);
6100         C2S(WOW_BEACON_EVENT);
6101         C2S(WOW_CLIENT_KICKOUT_EVENT);
6102         C2S(WOW_EVENT_MAX);
6103         default:
6104                 return NULL;
6105         }
6106 }
6107
6108 enum wmi_wow_wake_reason {
6109         WOW_REASON_UNSPECIFIED = -1,
6110         WOW_REASON_NLOD = 0,
6111         WOW_REASON_AP_ASSOC_LOST,
6112         WOW_REASON_LOW_RSSI,
6113         WOW_REASON_DEAUTH_RECVD,
6114         WOW_REASON_DISASSOC_RECVD,
6115         WOW_REASON_GTK_HS_ERR,
6116         WOW_REASON_EAP_REQ,
6117         WOW_REASON_FOURWAY_HS_RECV,
6118         WOW_REASON_TIMER_INTR_RECV,
6119         WOW_REASON_PATTERN_MATCH_FOUND,
6120         WOW_REASON_RECV_MAGIC_PATTERN,
6121         WOW_REASON_P2P_DISC,
6122         WOW_REASON_WLAN_HB,
6123         WOW_REASON_CSA_EVENT,
6124         WOW_REASON_PROBE_REQ_WPS_IE_RECV,
6125         WOW_REASON_AUTH_REQ_RECV,
6126         WOW_REASON_ASSOC_REQ_RECV,
6127         WOW_REASON_HTT_EVENT,
6128         WOW_REASON_RA_MATCH,
6129         WOW_REASON_HOST_AUTO_SHUTDOWN,
6130         WOW_REASON_IOAC_MAGIC_EVENT,
6131         WOW_REASON_IOAC_SHORT_EVENT,
6132         WOW_REASON_IOAC_EXTEND_EVENT,
6133         WOW_REASON_IOAC_TIMER_EVENT,
6134         WOW_REASON_ROAM_HO,
6135         WOW_REASON_DFS_PHYERR_RADADR_EVENT,
6136         WOW_REASON_BEACON_RECV,
6137         WOW_REASON_CLIENT_KICKOUT_EVENT,
6138         WOW_REASON_DEBUG_TEST = 0xFF,
6139 };
6140
6141 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
6142 {
6143         switch (reason) {
6144         C2S(WOW_REASON_UNSPECIFIED);
6145         C2S(WOW_REASON_NLOD);
6146         C2S(WOW_REASON_AP_ASSOC_LOST);
6147         C2S(WOW_REASON_LOW_RSSI);
6148         C2S(WOW_REASON_DEAUTH_RECVD);
6149         C2S(WOW_REASON_DISASSOC_RECVD);
6150         C2S(WOW_REASON_GTK_HS_ERR);
6151         C2S(WOW_REASON_EAP_REQ);
6152         C2S(WOW_REASON_FOURWAY_HS_RECV);
6153         C2S(WOW_REASON_TIMER_INTR_RECV);
6154         C2S(WOW_REASON_PATTERN_MATCH_FOUND);
6155         C2S(WOW_REASON_RECV_MAGIC_PATTERN);
6156         C2S(WOW_REASON_P2P_DISC);
6157         C2S(WOW_REASON_WLAN_HB);
6158         C2S(WOW_REASON_CSA_EVENT);
6159         C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
6160         C2S(WOW_REASON_AUTH_REQ_RECV);
6161         C2S(WOW_REASON_ASSOC_REQ_RECV);
6162         C2S(WOW_REASON_HTT_EVENT);
6163         C2S(WOW_REASON_RA_MATCH);
6164         C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
6165         C2S(WOW_REASON_IOAC_MAGIC_EVENT);
6166         C2S(WOW_REASON_IOAC_SHORT_EVENT);
6167         C2S(WOW_REASON_IOAC_EXTEND_EVENT);
6168         C2S(WOW_REASON_IOAC_TIMER_EVENT);
6169         C2S(WOW_REASON_ROAM_HO);
6170         C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
6171         C2S(WOW_REASON_BEACON_RECV);
6172         C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
6173         C2S(WOW_REASON_DEBUG_TEST);
6174         default:
6175                 return NULL;
6176         }
6177 }
6178
6179 #undef C2S
6180
6181 struct wmi_wow_ev_arg {
6182         u32 vdev_id;
6183         u32 flag;
6184         enum wmi_wow_wake_reason wake_reason;
6185         u32 data_len;
6186 };
6187
6188 #define WOW_MIN_PATTERN_SIZE    1
6189 #define WOW_MAX_PATTERN_SIZE    148
6190 #define WOW_MAX_PKT_OFFSET      128
6191
6192 enum wmi_tdls_state {
6193         WMI_TDLS_DISABLE,
6194         WMI_TDLS_ENABLE_PASSIVE,
6195         WMI_TDLS_ENABLE_ACTIVE,
6196 };
6197
6198 enum wmi_tdls_peer_state {
6199         WMI_TDLS_PEER_STATE_PEERING,
6200         WMI_TDLS_PEER_STATE_CONNECTED,
6201         WMI_TDLS_PEER_STATE_TEARDOWN,
6202 };
6203
6204 struct wmi_tdls_peer_update_cmd_arg {
6205         u32 vdev_id;
6206         enum wmi_tdls_peer_state peer_state;
6207         u8 addr[ETH_ALEN];
6208 };
6209
6210 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
6211
6212 struct wmi_tdls_peer_capab_arg {
6213         u8 peer_uapsd_queues;
6214         u8 peer_max_sp;
6215         u32 buff_sta_support;
6216         u32 off_chan_support;
6217         u32 peer_curr_operclass;
6218         u32 self_curr_operclass;
6219         u32 peer_chan_len;
6220         u32 peer_operclass_len;
6221         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
6222         u32 is_peer_responder;
6223         u32 pref_offchan_num;
6224         u32 pref_offchan_bw;
6225 };
6226
6227 enum wmi_txbf_conf {
6228         WMI_TXBF_CONF_UNSUPPORTED,
6229         WMI_TXBF_CONF_BEFORE_ASSOC,
6230         WMI_TXBF_CONF_AFTER_ASSOC,
6231 };
6232
6233 #define WMI_CCA_DETECT_LEVEL_AUTO       0
6234 #define WMI_CCA_DETECT_MARGIN_AUTO      0
6235
6236 struct wmi_pdev_set_adaptive_cca_params {
6237         __le32 enable;
6238         __le32 cca_detect_level;
6239         __le32 cca_detect_margin;
6240 } __packed;
6241
6242 struct ath10k;
6243 struct ath10k_vif;
6244 struct ath10k_fw_stats_pdev;
6245 struct ath10k_fw_stats_peer;
6246 struct ath10k_fw_stats;
6247
6248 int ath10k_wmi_attach(struct ath10k *ar);
6249 void ath10k_wmi_detach(struct ath10k *ar);
6250 void ath10k_wmi_free_host_mem(struct ath10k *ar);
6251 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
6252 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
6253
6254 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
6255 int ath10k_wmi_connect(struct ath10k *ar);
6256
6257 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
6258 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
6259 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
6260                                u32 cmd_id);
6261 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
6262
6263 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
6264                                      struct ath10k_fw_stats_pdev *dst);
6265 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
6266                                    struct ath10k_fw_stats_pdev *dst);
6267 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
6268                                    struct ath10k_fw_stats_pdev *dst);
6269 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
6270                                       struct ath10k_fw_stats_pdev *dst);
6271 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
6272                                 struct ath10k_fw_stats_peer *dst);
6273 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
6274                                     struct wmi_host_mem_chunks *chunks);
6275 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
6276                                       const struct wmi_start_scan_arg *arg);
6277 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
6278                               const struct wmi_wmm_params_arg *arg);
6279 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
6280                                 const struct wmi_channel_arg *arg);
6281 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
6282
6283 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
6284 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
6285 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
6286 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
6287 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
6288 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
6289 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
6290 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
6291 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
6292 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
6293 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
6294 void ath10k_wmi_event_dfs(struct ath10k *ar,
6295                           struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
6296 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
6297                                     struct wmi_phyerr_ev_arg *phyerr,
6298                                     u64 tsf);
6299 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
6300 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
6301 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
6302 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
6303 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
6304 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
6305 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
6306                                              struct sk_buff *skb);
6307 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
6308                                              struct sk_buff *skb);
6309 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
6310 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
6311 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
6312 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
6313 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
6314 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
6315                                          struct sk_buff *skb);
6316 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
6317 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
6318 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
6319 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
6320                                                 struct sk_buff *skb);
6321 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
6322 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
6323 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
6324 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
6325 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
6326 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
6327                                  int left_len, struct wmi_phyerr_ev_arg *arg);
6328 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
6329                                       struct ath10k_fw_stats *fw_stats,
6330                                       char *buf);
6331 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
6332                                      struct ath10k_fw_stats *fw_stats,
6333                                      char *buf);
6334 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
6335 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
6336 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
6337                                       struct ath10k_fw_stats *fw_stats,
6338                                       char *buf);
6339
6340 #endif /* _WMI_H_ */