drivers/power/bq24257_charger.c

   1 /*
   2  * TI BQ24257 charger driver
   3  *
   4  * Copyright (C) 2015 Intel Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  */
  17
  18 #include <linux/module.h>
  19 #include <linux/i2c.h>
  20 #include <linux/power_supply.h>
  21 #include <linux/regmap.h>
  22 #include <linux/types.h>
  23 #include <linux/gpio/consumer.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/delay.h>
  26
  27 #include <linux/acpi.h>
  28 #include <linux/of.h>
  29
  30 #define BQ24257_REG_1                   0x00
  31 #define BQ24257_REG_2                   0x01
  32 #define BQ24257_REG_3                   0x02
  33 #define BQ24257_REG_4                   0x03
  34 #define BQ24257_REG_5                   0x04
  35 #define BQ24257_REG_6                   0x05
  36 #define BQ24257_REG_7                   0x06
  37
  38 #define BQ24257_MANUFACTURER            "Texas Instruments"
  39 #define BQ24257_STAT_IRQ                "stat"
  40 #define BQ24257_PG_GPIO                 "pg"
  41
  42 #define BQ24257_ILIM_SET_DELAY          1000    /* msec */
  43
  44 enum bq24257_fields {
  45         F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT,                       /* REG 1 */
  46         F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE,  /* REG 2 */
  47         F_VBAT, F_USB_DET,                                          /* REG 3 */
  48         F_ICHG, F_ITERM,                                            /* REG 4 */
  49         F_LOOP_STATUS, F_LOW_CHG, F_DPDM_EN, F_CE_STATUS, F_VINDPM, /* REG 5 */
  50         F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_STAT,                    /* REG 6 */
  51         F_VOVP, F_CLR_VDP, F_FORCE_BATDET, F_FORCE_PTM,             /* REG 7 */
  52
  53         F_MAX_FIELDS
  54 };
  55
  56 /* initial field values, converted from uV/uA */
  57 struct bq24257_init_data {
  58         u8 ichg;        /* charge current      */
  59         u8 vbat;        /* regulation voltage  */
  60         u8 iterm;       /* termination current */
  61 };
  62
  63 struct bq24257_state {
  64         u8 status;
  65         u8 fault;
  66         bool power_good;
  67 };
  68
  69 struct bq24257_device {
  70         struct i2c_client *client;
  71         struct device *dev;
  72         struct power_supply *charger;
  73
  74         struct regmap *rmap;
  75         struct regmap_field *rmap_fields[F_MAX_FIELDS];
  76
  77         struct gpio_desc *pg;
  78
  79         struct delayed_work iilimit_setup_work;
  80
  81         struct bq24257_init_data init_data;
  82         struct bq24257_state state;
  83
  84         struct mutex lock; /* protect state data */
  85 };
  86
  87 static bool bq24257_is_volatile_reg(struct device *dev, unsigned int reg)
  88 {
  89         switch (reg) {
  90         case BQ24257_REG_2:
  91         case BQ24257_REG_4:
  92                 return false;
  93
  94         default:
  95                 return true;
  96         }
  97 }
  98
  99 static const struct regmap_config bq24257_regmap_config = {
 100         .reg_bits = 8,
 101         .val_bits = 8,
 102
 103         .max_register = BQ24257_REG_7,
 104         .cache_type = REGCACHE_RBTREE,
 105
 106         .volatile_reg = bq24257_is_volatile_reg,
 107 };
 108
 109 static const struct reg_field bq24257_reg_fields[] = {
 110         /* REG 1 */
 111         [F_WD_FAULT]            = REG_FIELD(BQ24257_REG_1, 7, 7),
 112         [F_WD_EN]               = REG_FIELD(BQ24257_REG_1, 6, 6),
 113         [F_STAT]                = REG_FIELD(BQ24257_REG_1, 4, 5),
 114         [F_FAULT]               = REG_FIELD(BQ24257_REG_1, 0, 3),
 115         /* REG 2 */
 116         [F_RESET]               = REG_FIELD(BQ24257_REG_2, 7, 7),
 117         [F_IILIMIT]             = REG_FIELD(BQ24257_REG_2, 4, 6),
 118         [F_EN_STAT]             = REG_FIELD(BQ24257_REG_2, 3, 3),
 119         [F_EN_TERM]             = REG_FIELD(BQ24257_REG_2, 2, 2),
 120         [F_CE]                  = REG_FIELD(BQ24257_REG_2, 1, 1),
 121         [F_HZ_MODE]             = REG_FIELD(BQ24257_REG_2, 0, 0),
 122         /* REG 3 */
 123         [F_VBAT]                = REG_FIELD(BQ24257_REG_3, 2, 7),
 124         [F_USB_DET]             = REG_FIELD(BQ24257_REG_3, 0, 1),
 125         /* REG 4 */
 126         [F_ICHG]                = REG_FIELD(BQ24257_REG_4, 3, 7),
 127         [F_ITERM]               = REG_FIELD(BQ24257_REG_4, 0, 2),
 128         /* REG 5 */
 129         [F_LOOP_STATUS]         = REG_FIELD(BQ24257_REG_5, 6, 7),
 130         [F_LOW_CHG]             = REG_FIELD(BQ24257_REG_5, 5, 5),
 131         [F_DPDM_EN]             = REG_FIELD(BQ24257_REG_5, 4, 4),
 132         [F_CE_STATUS]           = REG_FIELD(BQ24257_REG_5, 3, 3),
 133         [F_VINDPM]              = REG_FIELD(BQ24257_REG_5, 0, 2),
 134         /* REG 6 */
 135         [F_X2_TMR_EN]           = REG_FIELD(BQ24257_REG_6, 7, 7),
 136         [F_TMR]                 = REG_FIELD(BQ24257_REG_6, 5, 6),
 137         [F_SYSOFF]              = REG_FIELD(BQ24257_REG_6, 4, 4),
 138         [F_TS_STAT]             = REG_FIELD(BQ24257_REG_6, 0, 2),
 139         /* REG 7 */
 140         [F_VOVP]                = REG_FIELD(BQ24257_REG_7, 5, 7),
 141         [F_CLR_VDP]             = REG_FIELD(BQ24257_REG_7, 4, 4),
 142         [F_FORCE_BATDET]        = REG_FIELD(BQ24257_REG_7, 3, 3),
 143         [F_FORCE_PTM]           = REG_FIELD(BQ24257_REG_7, 2, 2)
 144 };
 145
 146 static const u32 bq24257_vbat_map[] = {
 147         3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
 148         3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
 149         3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
 150         3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
 151         4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
 152         4300000, 4320000, 4340000, 4360000, 4380000, 4400000, 4420000, 4440000
 153 };
 154
 155 #define BQ24257_VBAT_MAP_SIZE           ARRAY_SIZE(bq24257_vbat_map)
 156
 157 static const u32 bq24257_ichg_map[] = {
 158         500000, 550000, 600000, 650000, 700000, 750000, 800000, 850000, 900000,
 159         950000, 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000,
 160         1350000, 1400000, 1450000, 1500000, 1550000, 1600000, 1650000, 1700000,
 161         1750000, 1800000, 1850000, 1900000, 1950000, 2000000
 162 };
 163
 164 #define BQ24257_ICHG_MAP_SIZE           ARRAY_SIZE(bq24257_ichg_map)
 165
 166 static const u32 bq24257_iterm_map[] = {
 167         50000, 75000, 100000, 125000, 150000, 175000, 200000, 225000
 168 };
 169
 170 #define BQ24257_ITERM_MAP_SIZE          ARRAY_SIZE(bq24257_iterm_map)
 171
 172 static int bq24257_field_read(struct bq24257_device *bq,
 173                               enum bq24257_fields field_id)
 174 {
 175         int ret;
 176         int val;
 177
 178         ret = regmap_field_read(bq->rmap_fields[field_id], &val);
 179         if (ret < 0)
 180                 return ret;
 181
 182         return val;
 183 }
 184
 185 static int bq24257_field_write(struct bq24257_device *bq,
 186                                enum bq24257_fields field_id, u8 val)
 187 {
 188         return regmap_field_write(bq->rmap_fields[field_id], val);
 189 }
 190
 191 static u8 bq24257_find_idx(u32 value, const u32 *map, u8 map_size)
 192 {
 193         u8 idx;
 194
 195         for (idx = 1; idx < map_size; idx++)
 196                 if (value < map[idx])
 197                         break;
 198
 199         return idx - 1;
 200 }
 201
 202 enum bq24257_status {
 203         STATUS_READY,
 204         STATUS_CHARGE_IN_PROGRESS,
 205         STATUS_CHARGE_DONE,
 206         STATUS_FAULT,
 207 };
 208
 209 enum bq24257_fault {
 210         FAULT_NORMAL,
 211         FAULT_INPUT_OVP,
 212         FAULT_INPUT_UVLO,
 213         FAULT_SLEEP,
 214         FAULT_BAT_TS,
 215         FAULT_BAT_OVP,
 216         FAULT_TS,
 217         FAULT_TIMER,
 218         FAULT_NO_BAT,
 219         FAULT_ISET,
 220         FAULT_INPUT_LDO_LOW,
 221 };
 222
 223 static int bq24257_power_supply_get_property(struct power_supply *psy,
 224                                              enum power_supply_property psp,
 225                                              union power_supply_propval *val)
 226 {
 227         struct bq24257_device *bq = power_supply_get_drvdata(psy);
 228         struct bq24257_state state;
 229
 230         mutex_lock(&bq->lock);
 231         state = bq->state;
 232         mutex_unlock(&bq->lock);
 233
 234         switch (psp) {
 235         case POWER_SUPPLY_PROP_STATUS:
 236                 if (!state.power_good)
 237                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 238                 else if (state.status == STATUS_READY)
 239                         val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 240                 else if (state.status == STATUS_CHARGE_IN_PROGRESS)
 241                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
 242                 else if (state.status == STATUS_CHARGE_DONE)
 243                         val->intval = POWER_SUPPLY_STATUS_FULL;
 244                 else
 245                         val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 246                 break;
 247
 248         case POWER_SUPPLY_PROP_MANUFACTURER:
 249                 val->strval = BQ24257_MANUFACTURER;
 250                 break;
 251
 252         case POWER_SUPPLY_PROP_ONLINE:
 253                 val->intval = state.power_good;
 254                 break;
 255
 256         case POWER_SUPPLY_PROP_HEALTH:
 257                 switch (state.fault) {
 258                 case FAULT_NORMAL:
 259                         val->intval = POWER_SUPPLY_HEALTH_GOOD;
 260                         break;
 261
 262                 case FAULT_INPUT_OVP:
 263                 case FAULT_BAT_OVP:
 264                         val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 265                         break;
 266
 267                 case FAULT_TS:
 268                 case FAULT_BAT_TS:
 269                         val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
 270                         break;
 271
 272                 case FAULT_TIMER:
 273                         val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
 274                         break;
 275
 276                 default:
 277                         val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
 278                         break;
 279                 }
 280
 281                 break;
 282
 283         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 284                 val->intval = bq24257_ichg_map[bq->init_data.ichg];
 285                 break;
 286
 287         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 288                 val->intval = bq24257_ichg_map[BQ24257_ICHG_MAP_SIZE - 1];
 289                 break;
 290
 291         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 292                 val->intval = bq24257_vbat_map[bq->init_data.vbat];
 293                 break;
 294
 295         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 296                 val->intval = bq24257_vbat_map[BQ24257_VBAT_MAP_SIZE - 1];
 297                 break;
 298
 299         case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
 300                 val->intval = bq24257_iterm_map[bq->init_data.iterm];
 301                 break;
 302
 303         default:
 304                 return -EINVAL;
 305         }
 306
 307         return 0;
 308 }
 309
 310 static int bq24257_get_chip_state(struct bq24257_device *bq,
 311                                   struct bq24257_state *state)
 312 {
 313         int ret;
 314
 315         ret = bq24257_field_read(bq, F_STAT);
 316         if (ret < 0)
 317                 return ret;
 318
 319         state->status = ret;
 320
 321         ret = bq24257_field_read(bq, F_FAULT);
 322         if (ret < 0)
 323                 return ret;
 324
 325         state->fault = ret;
 326
 327         state->power_good = !gpiod_get_value_cansleep(bq->pg);
 328
 329         return 0;
 330 }
 331
 332 static bool bq24257_state_changed(struct bq24257_device *bq,
 333                                   struct bq24257_state *new_state)
 334 {
 335         int ret;
 336
 337         mutex_lock(&bq->lock);
 338         ret = (bq->state.status != new_state->status ||
 339                bq->state.fault != new_state->fault ||
 340                bq->state.power_good != new_state->power_good);
 341         mutex_unlock(&bq->lock);
 342
 343         return ret;
 344 }
 345
 346 enum bq24257_loop_status {
 347         LOOP_STATUS_NONE,
 348         LOOP_STATUS_IN_DPM,
 349         LOOP_STATUS_IN_CURRENT_LIMIT,
 350         LOOP_STATUS_THERMAL,
 351 };
 352
 353 enum bq24257_in_ilimit {
 354         IILIMIT_100,
 355         IILIMIT_150,
 356         IILIMIT_500,
 357         IILIMIT_900,
 358         IILIMIT_1500,
 359         IILIMIT_2000,
 360         IILIMIT_EXT,
 361         IILIMIT_NONE,
 362 };
 363
 364 enum bq24257_port_type {
 365         PORT_TYPE_DCP,          /* Dedicated Charging Port */
 366         PORT_TYPE_CDP,          /* Charging Downstream Port */
 367         PORT_TYPE_SDP,          /* Standard Downstream Port */
 368         PORT_TYPE_NON_STANDARD,
 369 };
 370
 371 enum bq24257_safety_timer {
 372         SAFETY_TIMER_45,
 373         SAFETY_TIMER_360,
 374         SAFETY_TIMER_540,
 375         SAFETY_TIMER_NONE,
 376 };
 377
 378 static int bq24257_iilimit_autoset(struct bq24257_device *bq)
 379 {
 380         int loop_status;
 381         int iilimit;
 382         int port_type;
 383         int ret;
 384         const u8 new_iilimit[] = {
 385                 [PORT_TYPE_DCP] = IILIMIT_2000,
 386                 [PORT_TYPE_CDP] = IILIMIT_2000,
 387                 [PORT_TYPE_SDP] = IILIMIT_500,
 388                 [PORT_TYPE_NON_STANDARD] = IILIMIT_500
 389         };
 390
 391         ret = bq24257_field_read(bq, F_LOOP_STATUS);
 392         if (ret < 0)
 393                 goto error;
 394
 395         loop_status = ret;
 396
 397         ret = bq24257_field_read(bq, F_IILIMIT);
 398         if (ret < 0)
 399                 goto error;
 400
 401         iilimit = ret;
 402
 403         /*
 404          * All USB ports should be able to handle 500mA. If not, DPM will lower
 405          * the charging current to accommodate the power source. No need to set
 406          * a lower IILIMIT value.
 407          */
 408         if (loop_status == LOOP_STATUS_IN_DPM && iilimit == IILIMIT_500)
 409                 return 0;
 410
 411         ret = bq24257_field_read(bq, F_USB_DET);
 412         if (ret < 0)
 413                 goto error;
 414
 415         port_type = ret;
 416
 417         ret = bq24257_field_write(bq, F_IILIMIT, new_iilimit[port_type]);
 418         if (ret < 0)
 419                 goto error;
 420
 421         ret = bq24257_field_write(bq, F_TMR, SAFETY_TIMER_360);
 422         if (ret < 0)
 423                 goto error;
 424
 425         ret = bq24257_field_write(bq, F_CLR_VDP, 1);
 426         if (ret < 0)
 427                 goto error;
 428
 429         dev_dbg(bq->dev, "port/loop = %d/%d -> iilimit = %d\n",
 430                 port_type, loop_status, new_iilimit[port_type]);
 431
 432         return 0;
 433
 434 error:
 435         dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
 436         return ret;
 437 }
 438
 439 static void bq24257_iilimit_setup_work(struct work_struct *work)
 440 {
 441         struct bq24257_device *bq = container_of(work, struct bq24257_device,
 442                                                  iilimit_setup_work.work);
 443
 444         bq24257_iilimit_autoset(bq);
 445 }
 446
 447 static void bq24257_handle_state_change(struct bq24257_device *bq,
 448                                         struct bq24257_state *new_state)
 449 {
 450         int ret;
 451         struct bq24257_state old_state;
 452         bool reset_iilimit = false;
 453         bool config_iilimit = false;
 454
 455         mutex_lock(&bq->lock);
 456         old_state = bq->state;
 457         mutex_unlock(&bq->lock);
 458
 459         if (!new_state->power_good) {                        /* power removed */
 460                 cancel_delayed_work_sync(&bq->iilimit_setup_work);
 461
 462                 /* activate D+/D- port detection algorithm */
 463                 ret = bq24257_field_write(bq, F_DPDM_EN, 1);
 464                 if (ret < 0)
 465                         goto error;
 466
 467                 reset_iilimit = true;
 468         } else if (!old_state.power_good) {                 /* power inserted */
 469                 config_iilimit = true;
 470         } else if (new_state->fault == FAULT_NO_BAT) {     /* battery removed */
 471                 cancel_delayed_work_sync(&bq->iilimit_setup_work);
 472
 473                 reset_iilimit = true;
 474         } else if (old_state.fault == FAULT_NO_BAT) {    /* battery connected */
 475                 config_iilimit = true;
 476         } else if (new_state->fault == FAULT_TIMER) { /* safety timer expired */
 477                 dev_err(bq->dev, "Safety timer expired! Battery dead?\n");
 478         }
 479
 480         if (reset_iilimit) {
 481                 ret = bq24257_field_write(bq, F_IILIMIT, IILIMIT_500);
 482                 if (ret < 0)
 483                         goto error;
 484         } else if (config_iilimit) {
 485                 schedule_delayed_work(&bq->iilimit_setup_work,
 486                                       msecs_to_jiffies(BQ24257_ILIM_SET_DELAY));
 487         }
 488
 489         return;
 490
 491 error:
 492         dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
 493 }
 494
 495 static irqreturn_t bq24257_irq_handler_thread(int irq, void *private)
 496 {
 497         int ret;
 498         struct bq24257_device *bq = private;
 499         struct bq24257_state state;
 500
 501         ret = bq24257_get_chip_state(bq, &state);
 502         if (ret < 0)
 503                 return IRQ_HANDLED;
 504
 505         if (!bq24257_state_changed(bq, &state))
 506                 return IRQ_HANDLED;
 507
 508         dev_dbg(bq->dev, "irq(state changed): status/fault/pg = %d/%d/%d\n",
 509                 state.status, state.fault, state.power_good);
 510
 511         bq24257_handle_state_change(bq, &state);
 512
 513         mutex_lock(&bq->lock);
 514         bq->state = state;
 515         mutex_unlock(&bq->lock);
 516
 517         power_supply_changed(bq->charger);
 518
 519         return IRQ_HANDLED;
 520 }
 521
 522 static int bq24257_hw_init(struct bq24257_device *bq)
 523 {
 524         int ret;
 525         int i;
 526         struct bq24257_state state;
 527
 528         const struct {
 529                 int field;
 530                 u32 value;
 531         } init_data[] = {
 532                 {F_ICHG, bq->init_data.ichg},
 533                 {F_VBAT, bq->init_data.vbat},
 534                 {F_ITERM, bq->init_data.iterm}
 535         };
 536
 537         /*
 538          * Disable the watchdog timer to prevent the IC from going back to
 539          * default settings after 50 seconds of I2C inactivity.
 540          */
 541         ret = bq24257_field_write(bq, F_WD_EN, 0);
 542         if (ret < 0)
 543                 return ret;
 544
 545         /* configure the charge currents and voltages */
 546         for (i = 0; i < ARRAY_SIZE(init_data); i++) {
 547                 ret = bq24257_field_write(bq, init_data[i].field,
 548                                           init_data[i].value);
 549                 if (ret < 0)
 550                         return ret;
 551         }
 552
 553         ret = bq24257_get_chip_state(bq, &state);
 554         if (ret < 0)
 555                 return ret;
 556
 557         mutex_lock(&bq->lock);
 558         bq->state = state;
 559         mutex_unlock(&bq->lock);
 560
 561         if (!state.power_good)
 562                 /* activate D+/D- detection algorithm */
 563                 ret = bq24257_field_write(bq, F_DPDM_EN, 1);
 564         else if (state.fault != FAULT_NO_BAT)
 565                 ret = bq24257_iilimit_autoset(bq);
 566
 567         return ret;
 568 }
 569
 570 static enum power_supply_property bq24257_power_supply_props[] = {
 571         POWER_SUPPLY_PROP_MANUFACTURER,
 572         POWER_SUPPLY_PROP_STATUS,
 573         POWER_SUPPLY_PROP_ONLINE,
 574         POWER_SUPPLY_PROP_HEALTH,
 575         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 576         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 577         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 578         POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 579         POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
 580 };
 581
 582 static char *bq24257_charger_supplied_to[] = {
 583         "main-battery",
 584 };
 585
 586 static const struct power_supply_desc bq24257_power_supply_desc = {
 587         .name = "bq24257-charger",
 588         .type = POWER_SUPPLY_TYPE_USB,
 589         .properties = bq24257_power_supply_props,
 590         .num_properties = ARRAY_SIZE(bq24257_power_supply_props),
 591         .get_property = bq24257_power_supply_get_property,
 592 };
 593
 594 static int bq24257_power_supply_init(struct bq24257_device *bq)
 595 {
 596         struct power_supply_config psy_cfg = { .drv_data = bq, };
 597
 598         psy_cfg.supplied_to = bq24257_charger_supplied_to;
 599         psy_cfg.num_supplicants = ARRAY_SIZE(bq24257_charger_supplied_to);
 600
 601         bq->charger = power_supply_register(bq->dev, &bq24257_power_supply_desc,
 602                                             &psy_cfg);
 603         if (IS_ERR(bq->charger))
 604                 return PTR_ERR(bq->charger);
 605
 606         return 0;
 607 }
 608
 609 static int bq24257_irq_probe(struct bq24257_device *bq)
 610 {
 611         struct gpio_desc *stat_irq;
 612
 613         stat_irq = devm_gpiod_get_index(bq->dev, BQ24257_STAT_IRQ, 0, GPIOD_IN);
 614         if (IS_ERR(stat_irq)) {
 615                 dev_err(bq->dev, "could not probe stat_irq pin\n");
 616                 return PTR_ERR(stat_irq);
 617         }
 618
 619         return gpiod_to_irq(stat_irq);
 620 }
 621
 622 static int bq24257_pg_gpio_probe(struct bq24257_device *bq)
 623 {
 624         bq->pg = devm_gpiod_get_index(bq->dev, BQ24257_PG_GPIO, 0, GPIOD_IN);
 625         if (IS_ERR(bq->pg)) {
 626                 dev_err(bq->dev, "could not probe PG pin\n");
 627                 return PTR_ERR(bq->pg);
 628         }
 629
 630         return 0;
 631 }
 632
 633 static int bq24257_fw_probe(struct bq24257_device *bq)
 634 {
 635         int ret;
 636         u32 property;
 637
 638         ret = device_property_read_u32(bq->dev, "ti,charge-current", &property);
 639         if (ret < 0)
 640                 return ret;
 641
 642         bq->init_data.ichg = bq24257_find_idx(property, bq24257_ichg_map,
 643                                               BQ24257_ICHG_MAP_SIZE);
 644
 645         ret = device_property_read_u32(bq->dev, "ti,battery-regulation-voltage",
 646                                        &property);
 647         if (ret < 0)
 648                 return ret;
 649
 650         bq->init_data.vbat = bq24257_find_idx(property, bq24257_vbat_map,
 651                                               BQ24257_VBAT_MAP_SIZE);
 652
 653         ret = device_property_read_u32(bq->dev, "ti,termination-current",
 654                                        &property);
 655         if (ret < 0)
 656                 return ret;
 657
 658         bq->init_data.iterm = bq24257_find_idx(property, bq24257_iterm_map,
 659                                                BQ24257_ITERM_MAP_SIZE);
 660
 661         return 0;
 662 }
 663
 664 static int bq24257_probe(struct i2c_client *client,
 665                          const struct i2c_device_id *id)
 666 {
 667         struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 668         struct device *dev = &client->dev;
 669         struct bq24257_device *bq;
 670         int ret;
 671         int i;
 672
 673         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 674                 dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
 675                 return -ENODEV;
 676         }
 677
 678         bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
 679         if (!bq)
 680                 return -ENOMEM;
 681
 682         bq->client = client;
 683         bq->dev = dev;
 684
 685         mutex_init(&bq->lock);
 686
 687         bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config);
 688         if (IS_ERR(bq->rmap)) {
 689                 dev_err(dev, "failed to allocate register map\n");
 690                 return PTR_ERR(bq->rmap);
 691         }
 692
 693         for (i = 0; i < ARRAY_SIZE(bq24257_reg_fields); i++) {
 694                 const struct reg_field *reg_fields = bq24257_reg_fields;
 695
 696                 bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
 697                                                              reg_fields[i]);
 698                 if (IS_ERR(bq->rmap_fields[i])) {
 699                         dev_err(dev, "cannot allocate regmap field\n");
 700                         return PTR_ERR(bq->rmap_fields[i]);
 701                 }
 702         }
 703
 704         i2c_set_clientdata(client, bq);
 705
 706         INIT_DELAYED_WORK(&bq->iilimit_setup_work, bq24257_iilimit_setup_work);
 707
 708         if (!dev->platform_data) {
 709                 ret = bq24257_fw_probe(bq);
 710                 if (ret < 0) {
 711                         dev_err(dev, "Cannot read device properties.\n");
 712                         return ret;
 713                 }
 714         } else {
 715                 return -ENODEV;
 716         }
 717
 718         /* we can only check Power Good status by probing the PG pin */
 719         ret = bq24257_pg_gpio_probe(bq);
 720         if (ret < 0)
 721                 return ret;
 722
 723         /* reset all registers to defaults */
 724         ret = bq24257_field_write(bq, F_RESET, 1);
 725         if (ret < 0)
 726                 return ret;
 727
 728         /*
 729          * Put the RESET bit back to 0, in cache. For some reason the HW always
 730          * returns 1 on this bit, so this is the only way to avoid resetting the
 731          * chip every time we update another field in this register.
 732          */
 733         ret = bq24257_field_write(bq, F_RESET, 0);
 734         if (ret < 0)
 735                 return ret;
 736
 737         ret = bq24257_hw_init(bq);
 738         if (ret < 0) {
 739                 dev_err(dev, "Cannot initialize the chip.\n");
 740                 return ret;
 741         }
 742
 743         if (client->irq <= 0)
 744                 client->irq = bq24257_irq_probe(bq);
 745
 746         if (client->irq < 0) {
 747                 dev_err(dev, "no irq resource found\n");
 748                 return client->irq;
 749         }
 750
 751         ret = devm_request_threaded_irq(dev, client->irq, NULL,
 752                                         bq24257_irq_handler_thread,
 753                                         IRQF_TRIGGER_FALLING |
 754                                         IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 755                                         BQ24257_STAT_IRQ, bq);
 756         if (ret)
 757                 return ret;
 758
 759         ret = bq24257_power_supply_init(bq);
 760         if (ret < 0)
 761                 dev_err(dev, "Failed to register power supply\n");
 762
 763         return ret;
 764 }
 765
 766 static int bq24257_remove(struct i2c_client *client)
 767 {
 768         struct bq24257_device *bq = i2c_get_clientdata(client);
 769
 770         cancel_delayed_work_sync(&bq->iilimit_setup_work);
 771
 772         power_supply_unregister(bq->charger);
 773
 774         bq24257_field_write(bq, F_RESET, 1); /* reset to defaults */
 775
 776         return 0;
 777 }
 778
 779 #ifdef CONFIG_PM_SLEEP
 780 static int bq24257_suspend(struct device *dev)
 781 {
 782         struct bq24257_device *bq = dev_get_drvdata(dev);
 783         int ret = 0;
 784
 785         cancel_delayed_work_sync(&bq->iilimit_setup_work);
 786
 787         /* reset all registers to default (and activate standalone mode) */
 788         ret = bq24257_field_write(bq, F_RESET, 1);
 789         if (ret < 0)
 790                 dev_err(bq->dev, "Cannot reset chip to standalone mode.\n");
 791
 792         return ret;
 793 }
 794
 795 static int bq24257_resume(struct device *dev)
 796 {
 797         int ret;
 798         struct bq24257_device *bq = dev_get_drvdata(dev);
 799
 800         ret = regcache_drop_region(bq->rmap, BQ24257_REG_1, BQ24257_REG_7);
 801         if (ret < 0)
 802                 return ret;
 803
 804         ret = bq24257_field_write(bq, F_RESET, 0);
 805         if (ret < 0)
 806                 return ret;
 807
 808         ret = bq24257_hw_init(bq);
 809         if (ret < 0) {
 810                 dev_err(bq->dev, "Cannot init chip after resume.\n");
 811                 return ret;
 812         }
 813
 814         /* signal userspace, maybe state changed while suspended */
 815         power_supply_changed(bq->charger);
 816
 817         return 0;
 818 }
 819 #endif
 820
 821 static const struct dev_pm_ops bq24257_pm = {
 822         SET_SYSTEM_SLEEP_PM_OPS(bq24257_suspend, bq24257_resume)
 823 };
 824
 825 static const struct i2c_device_id bq24257_i2c_ids[] = {
 826         { "bq24257", 0 },
 827         {},
 828 };
 829 MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids);
 830
 831 static const struct of_device_id bq24257_of_match[] = {
 832         { .compatible = "ti,bq24257", },
 833         { },
 834 };
 835 MODULE_DEVICE_TABLE(of, bq24257_of_match);
 836
 837 static const struct acpi_device_id bq24257_acpi_match[] = {
 838         {"BQ242570", 0},
 839         {},
 840 };
 841 MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
 842
 843 static struct i2c_driver bq24257_driver = {
 844         .driver = {
 845                 .name = "bq24257-charger",
 846                 .of_match_table = of_match_ptr(bq24257_of_match),
 847                 .acpi_match_table = ACPI_PTR(bq24257_acpi_match),
 848                 .pm = &bq24257_pm,
 849         },
 850         .probe = bq24257_probe,
 851         .remove = bq24257_remove,
 852         .id_table = bq24257_i2c_ids,
 853 };
 854 module_i2c_driver(bq24257_driver);
 855
 856 MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
 857 MODULE_DESCRIPTION("bq24257 charger driver");
 858 MODULE_LICENSE("GPL");