drivers/scsi/mpt3sas/mpt3sas_base.c

   1 /*
   2  * This is the Fusion MPT base driver providing common API layer interface
   3  * for access to MPT (Message Passing Technology) firmware.
   4  *
   5  * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
   6  * Copyright (C) 2012-2014  LSI Corporation
   7  * Copyright (C) 2013-2014 Avago Technologies
   8  *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License
  12  * as published by the Free Software Foundation; either version 2
  13  * of the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * NO WARRANTY
  21  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  22  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  23  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  24  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  25  * solely responsible for determining the appropriateness of using and
  26  * distributing the Program and assumes all risks associated with its
  27  * exercise of rights under this Agreement, including but not limited to
  28  * the risks and costs of program errors, damage to or loss of data,
  29  * programs or equipment, and unavailability or interruption of operations.
  30
  31  * DISCLAIMER OF LIABILITY
  32  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  33  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  34  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  35  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  38  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  39
  40  * You should have received a copy of the GNU General Public License
  41  * along with this program; if not, write to the Free Software
  42  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  43  * USA.
  44  */
  45
  46 #include <linux/kernel.h>
  47 #include <linux/module.h>
  48 #include <linux/errno.h>
  49 #include <linux/init.h>
  50 #include <linux/slab.h>
  51 #include <linux/types.h>
  52 #include <linux/pci.h>
  53 #include <linux/kdev_t.h>
  54 #include <linux/blkdev.h>
  55 #include <linux/delay.h>
  56 #include <linux/interrupt.h>
  57 #include <linux/dma-mapping.h>
  58 #include <linux/io.h>
  59 #include <linux/time.h>
  60 #include <linux/kthread.h>
  61 #include <linux/aer.h>
  62
  63
  64 #include "mpt3sas_base.h"
  65
  66 static MPT_CALLBACK     mpt_callbacks[MPT_MAX_CALLBACKS];
  67
  68
  69 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
  70
  71  /* maximum controller queue depth */
  72 #define MAX_HBA_QUEUE_DEPTH     30000
  73 #define MAX_CHAIN_DEPTH         100000
  74 static int max_queue_depth = -1;
  75 module_param(max_queue_depth, int, 0);
  76 MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
  77
  78 static int max_sgl_entries = -1;
  79 module_param(max_sgl_entries, int, 0);
  80 MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
  81
  82 static int msix_disable = -1;
  83 module_param(msix_disable, int, 0);
  84 MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
  85
  86 static int max_msix_vectors = -1;
  87 module_param(max_msix_vectors, int, 0);
  88 MODULE_PARM_DESC(max_msix_vectors,
  89         " max msix vectors");
  90
  91 static int mpt3sas_fwfault_debug;
  92 MODULE_PARM_DESC(mpt3sas_fwfault_debug,
  93         " enable detection of firmware fault and halt firmware - (default=0)");
  94
  95 static int
  96 _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
  97
  98 /**
  99  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
 100  *
 101  */
 102 static int
 103 _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
 104 {
 105         int ret = param_set_int(val, kp);
 106         struct MPT3SAS_ADAPTER *ioc;
 107
 108         if (ret)
 109                 return ret;
 110
 111         pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
 112         list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
 113                 ioc->fwfault_debug = mpt3sas_fwfault_debug;
 114         return 0;
 115 }
 116 module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
 117         param_get_int, &mpt3sas_fwfault_debug, 0644);
 118
 119 /**
 120  *  mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
 121  * @arg: input argument, used to derive ioc
 122  *
 123  * Return 0 if controller is removed from pci subsystem.
 124  * Return -1 for other case.
 125  */
 126 static int mpt3sas_remove_dead_ioc_func(void *arg)
 127 {
 128         struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg;
 129         struct pci_dev *pdev;
 130
 131         if ((ioc == NULL))
 132                 return -1;
 133
 134         pdev = ioc->pdev;
 135         if ((pdev == NULL))
 136                 return -1;
 137         pci_stop_and_remove_bus_device_locked(pdev);
 138         return 0;
 139 }
 140
 141 /**
 142  * _base_fault_reset_work - workq handling ioc fault conditions
 143  * @work: input argument, used to derive ioc
 144  * Context: sleep.
 145  *
 146  * Return nothing.
 147  */
 148 static void
 149 _base_fault_reset_work(struct work_struct *work)
 150 {
 151         struct MPT3SAS_ADAPTER *ioc =
 152             container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work);
 153         unsigned long    flags;
 154         u32 doorbell;
 155         int rc;
 156         struct task_struct *p;
 157
 158
 159         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 160         if (ioc->shost_recovery)
 161                 goto rearm_timer;
 162         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 163
 164         doorbell = mpt3sas_base_get_iocstate(ioc, 0);
 165         if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
 166                 pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
 167                     ioc->name);
 168
 169                 /*
 170                  * Call _scsih_flush_pending_cmds callback so that we flush all
 171                  * pending commands back to OS. This call is required to aovid
 172                  * deadlock at block layer. Dead IOC will fail to do diag reset,
 173                  * and this call is safe since dead ioc will never return any
 174                  * command back from HW.
 175                  */
 176                 ioc->schedule_dead_ioc_flush_running_cmds(ioc);
 177                 /*
 178                  * Set remove_host flag early since kernel thread will
 179                  * take some time to execute.
 180                  */
 181                 ioc->remove_host = 1;
 182                 /*Remove the Dead Host */
 183                 p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
 184                     "mpt3sas_dead_ioc_%d", ioc->id);
 185                 if (IS_ERR(p))
 186                         pr_err(MPT3SAS_FMT
 187                         "%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
 188                         ioc->name, __func__);
 189                 else
 190                         pr_err(MPT3SAS_FMT
 191                         "%s: Running mpt3sas_dead_ioc thread success !!!!\n",
 192                         ioc->name, __func__);
 193                 return; /* don't rearm timer */
 194         }
 195
 196         if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
 197                 rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 198                     FORCE_BIG_HAMMER);
 199                 pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name,
 200                     __func__, (rc == 0) ? "success" : "failed");
 201                 doorbell = mpt3sas_base_get_iocstate(ioc, 0);
 202                 if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
 203                         mpt3sas_base_fault_info(ioc, doorbell &
 204                             MPI2_DOORBELL_DATA_MASK);
 205                 if (rc && (doorbell & MPI2_IOC_STATE_MASK) !=
 206                     MPI2_IOC_STATE_OPERATIONAL)
 207                         return; /* don't rearm timer */
 208         }
 209
 210         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 211  rearm_timer:
 212         if (ioc->fault_reset_work_q)
 213                 queue_delayed_work(ioc->fault_reset_work_q,
 214                     &ioc->fault_reset_work,
 215                     msecs_to_jiffies(FAULT_POLLING_INTERVAL));
 216         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 217 }
 218
 219 /**
 220  * mpt3sas_base_start_watchdog - start the fault_reset_work_q
 221  * @ioc: per adapter object
 222  * Context: sleep.
 223  *
 224  * Return nothing.
 225  */
 226 void
 227 mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
 228 {
 229         unsigned long    flags;
 230
 231         if (ioc->fault_reset_work_q)
 232                 return;
 233
 234         /* initialize fault polling */
 235
 236         INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
 237         snprintf(ioc->fault_reset_work_q_name,
 238             sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
 239         ioc->fault_reset_work_q =
 240                 create_singlethread_workqueue(ioc->fault_reset_work_q_name);
 241         if (!ioc->fault_reset_work_q) {
 242                 pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n",
 243                     ioc->name, __func__, __LINE__);
 244                         return;
 245         }
 246         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 247         if (ioc->fault_reset_work_q)
 248                 queue_delayed_work(ioc->fault_reset_work_q,
 249                     &ioc->fault_reset_work,
 250                     msecs_to_jiffies(FAULT_POLLING_INTERVAL));
 251         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 252 }
 253
 254 /**
 255  * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q
 256  * @ioc: per adapter object
 257  * Context: sleep.
 258  *
 259  * Return nothing.
 260  */
 261 void
 262 mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc)
 263 {
 264         unsigned long flags;
 265         struct workqueue_struct *wq;
 266
 267         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 268         wq = ioc->fault_reset_work_q;
 269         ioc->fault_reset_work_q = NULL;
 270         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 271         if (wq) {
 272                 if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
 273                         flush_workqueue(wq);
 274                 destroy_workqueue(wq);
 275         }
 276 }
 277
 278 /**
 279  * mpt3sas_base_fault_info - verbose translation of firmware FAULT code
 280  * @ioc: per adapter object
 281  * @fault_code: fault code
 282  *
 283  * Return nothing.
 284  */
 285 void
 286 mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code)
 287 {
 288         pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n",
 289             ioc->name, fault_code);
 290 }
 291
 292 /**
 293  * mpt3sas_halt_firmware - halt's mpt controller firmware
 294  * @ioc: per adapter object
 295  *
 296  * For debugging timeout related issues.  Writing 0xCOFFEE00
 297  * to the doorbell register will halt controller firmware. With
 298  * the purpose to stop both driver and firmware, the enduser can
 299  * obtain a ring buffer from controller UART.
 300  */
 301 void
 302 mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
 303 {
 304         u32 doorbell;
 305
 306         if (!ioc->fwfault_debug)
 307                 return;
 308
 309         dump_stack();
 310
 311         doorbell = readl(&ioc->chip->Doorbell);
 312         if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
 313                 mpt3sas_base_fault_info(ioc , doorbell);
 314         else {
 315                 writel(0xC0FFEE00, &ioc->chip->Doorbell);
 316                 pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n",
 317                         ioc->name);
 318         }
 319
 320         if (ioc->fwfault_debug == 2)
 321                 for (;;)
 322                         ;
 323         else
 324                 panic("panic in %s\n", __func__);
 325 }
 326
 327 #ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 328 /**
 329  * _base_sas_ioc_info - verbose translation of the ioc status
 330  * @ioc: per adapter object
 331  * @mpi_reply: reply mf payload returned from firmware
 332  * @request_hdr: request mf
 333  *
 334  * Return nothing.
 335  */
 336 static void
 337 _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
 338         MPI2RequestHeader_t *request_hdr)
 339 {
 340         u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
 341             MPI2_IOCSTATUS_MASK;
 342         char *desc = NULL;
 343         u16 frame_sz;
 344         char *func_str = NULL;
 345
 346         /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
 347         if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 348             request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
 349             request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
 350                 return;
 351
 352         if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 353                 return;
 354
 355         switch (ioc_status) {
 356
 357 /****************************************************************************
 358 *  Common IOCStatus values for all replies
 359 ****************************************************************************/
 360
 361         case MPI2_IOCSTATUS_INVALID_FUNCTION:
 362                 desc = "invalid function";
 363                 break;
 364         case MPI2_IOCSTATUS_BUSY:
 365                 desc = "busy";
 366                 break;
 367         case MPI2_IOCSTATUS_INVALID_SGL:
 368                 desc = "invalid sgl";
 369                 break;
 370         case MPI2_IOCSTATUS_INTERNAL_ERROR:
 371                 desc = "internal error";
 372                 break;
 373         case MPI2_IOCSTATUS_INVALID_VPID:
 374                 desc = "invalid vpid";
 375                 break;
 376         case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
 377                 desc = "insufficient resources";
 378                 break;
 379         case MPI2_IOCSTATUS_INVALID_FIELD:
 380                 desc = "invalid field";
 381                 break;
 382         case MPI2_IOCSTATUS_INVALID_STATE:
 383                 desc = "invalid state";
 384                 break;
 385         case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
 386                 desc = "op state not supported";
 387                 break;
 388
 389 /****************************************************************************
 390 *  Config IOCStatus values
 391 ****************************************************************************/
 392
 393         case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
 394                 desc = "config invalid action";
 395                 break;
 396         case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
 397                 desc = "config invalid type";
 398                 break;
 399         case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
 400                 desc = "config invalid page";
 401                 break;
 402         case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
 403                 desc = "config invalid data";
 404                 break;
 405         case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
 406                 desc = "config no defaults";
 407                 break;
 408         case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
 409                 desc = "config cant commit";
 410                 break;
 411
 412 /****************************************************************************
 413 *  SCSI IO Reply
 414 ****************************************************************************/
 415
 416         case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
 417         case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
 418         case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
 419         case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
 420         case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
 421         case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
 422         case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
 423         case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
 424         case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
 425         case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
 426         case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
 427         case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
 428                 break;
 429
 430 /****************************************************************************
 431 *  For use by SCSI Initiator and SCSI Target end-to-end data protection
 432 ****************************************************************************/
 433
 434         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
 435                 desc = "eedp guard error";
 436                 break;
 437         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
 438                 desc = "eedp ref tag error";
 439                 break;
 440         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
 441                 desc = "eedp app tag error";
 442                 break;
 443
 444 /****************************************************************************
 445 *  SCSI Target values
 446 ****************************************************************************/
 447
 448         case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
 449                 desc = "target invalid io index";
 450                 break;
 451         case MPI2_IOCSTATUS_TARGET_ABORTED:
 452                 desc = "target aborted";
 453                 break;
 454         case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
 455                 desc = "target no conn retryable";
 456                 break;
 457         case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
 458                 desc = "target no connection";
 459                 break;
 460         case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
 461                 desc = "target xfer count mismatch";
 462                 break;
 463         case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
 464                 desc = "target data offset error";
 465                 break;
 466         case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
 467                 desc = "target too much write data";
 468                 break;
 469         case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
 470                 desc = "target iu too short";
 471                 break;
 472         case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
 473                 desc = "target ack nak timeout";
 474                 break;
 475         case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
 476                 desc = "target nak received";
 477                 break;
 478
 479 /****************************************************************************
 480 *  Serial Attached SCSI values
 481 ****************************************************************************/
 482
 483         case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
 484                 desc = "smp request failed";
 485                 break;
 486         case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
 487                 desc = "smp data overrun";
 488                 break;
 489
 490 /****************************************************************************
 491 *  Diagnostic Buffer Post / Diagnostic Release values
 492 ****************************************************************************/
 493
 494         case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
 495                 desc = "diagnostic released";
 496                 break;
 497         default:
 498                 break;
 499         }
 500
 501         if (!desc)
 502                 return;
 503
 504         switch (request_hdr->Function) {
 505         case MPI2_FUNCTION_CONFIG:
 506                 frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
 507                 func_str = "config_page";
 508                 break;
 509         case MPI2_FUNCTION_SCSI_TASK_MGMT:
 510                 frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
 511                 func_str = "task_mgmt";
 512                 break;
 513         case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
 514                 frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
 515                 func_str = "sas_iounit_ctl";
 516                 break;
 517         case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
 518                 frame_sz = sizeof(Mpi2SepRequest_t);
 519                 func_str = "enclosure";
 520                 break;
 521         case MPI2_FUNCTION_IOC_INIT:
 522                 frame_sz = sizeof(Mpi2IOCInitRequest_t);
 523                 func_str = "ioc_init";
 524                 break;
 525         case MPI2_FUNCTION_PORT_ENABLE:
 526                 frame_sz = sizeof(Mpi2PortEnableRequest_t);
 527                 func_str = "port_enable";
 528                 break;
 529         case MPI2_FUNCTION_SMP_PASSTHROUGH:
 530                 frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
 531                 func_str = "smp_passthru";
 532                 break;
 533         default:
 534                 frame_sz = 32;
 535                 func_str = "unknown";
 536                 break;
 537         }
 538
 539         pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n",
 540                 ioc->name, desc, ioc_status, request_hdr, func_str);
 541
 542         _debug_dump_mf(request_hdr, frame_sz/4);
 543 }
 544
 545 /**
 546  * _base_display_event_data - verbose translation of firmware asyn events
 547  * @ioc: per adapter object
 548  * @mpi_reply: reply mf payload returned from firmware
 549  *
 550  * Return nothing.
 551  */
 552 static void
 553 _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
 554         Mpi2EventNotificationReply_t *mpi_reply)
 555 {
 556         char *desc = NULL;
 557         u16 event;
 558
 559         if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
 560                 return;
 561
 562         event = le16_to_cpu(mpi_reply->Event);
 563
 564         switch (event) {
 565         case MPI2_EVENT_LOG_DATA:
 566                 desc = "Log Data";
 567                 break;
 568         case MPI2_EVENT_STATE_CHANGE:
 569                 desc = "Status Change";
 570                 break;
 571         case MPI2_EVENT_HARD_RESET_RECEIVED:
 572                 desc = "Hard Reset Received";
 573                 break;
 574         case MPI2_EVENT_EVENT_CHANGE:
 575                 desc = "Event Change";
 576                 break;
 577         case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
 578                 desc = "Device Status Change";
 579                 break;
 580         case MPI2_EVENT_IR_OPERATION_STATUS:
 581                 desc = "IR Operation Status";
 582                 break;
 583         case MPI2_EVENT_SAS_DISCOVERY:
 584         {
 585                 Mpi2EventDataSasDiscovery_t *event_data =
 586                     (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
 587                 pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name,
 588                     (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
 589                     "start" : "stop");
 590                 if (event_data->DiscoveryStatus)
 591                         pr_info("discovery_status(0x%08x)",
 592                             le32_to_cpu(event_data->DiscoveryStatus));
 593                         pr_info("\n");
 594                 return;
 595         }
 596         case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
 597                 desc = "SAS Broadcast Primitive";
 598                 break;
 599         case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
 600                 desc = "SAS Init Device Status Change";
 601                 break;
 602         case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
 603                 desc = "SAS Init Table Overflow";
 604                 break;
 605         case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
 606                 desc = "SAS Topology Change List";
 607                 break;
 608         case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
 609                 desc = "SAS Enclosure Device Status Change";
 610                 break;
 611         case MPI2_EVENT_IR_VOLUME:
 612                 desc = "IR Volume";
 613                 break;
 614         case MPI2_EVENT_IR_PHYSICAL_DISK:
 615                 desc = "IR Physical Disk";
 616                 break;
 617         case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
 618                 desc = "IR Configuration Change List";
 619                 break;
 620         case MPI2_EVENT_LOG_ENTRY_ADDED:
 621                 desc = "Log Entry Added";
 622                 break;
 623         case MPI2_EVENT_TEMP_THRESHOLD:
 624                 desc = "Temperature Threshold";
 625                 break;
 626         }
 627
 628         if (!desc)
 629                 return;
 630
 631         pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
 632 }
 633 #endif
 634
 635 /**
 636  * _base_sas_log_info - verbose translation of firmware log info
 637  * @ioc: per adapter object
 638  * @log_info: log info
 639  *
 640  * Return nothing.
 641  */
 642 static void
 643 _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
 644 {
 645         union loginfo_type {
 646                 u32     loginfo;
 647                 struct {
 648                         u32     subcode:16;
 649                         u32     code:8;
 650                         u32     originator:4;
 651                         u32     bus_type:4;
 652                 } dw;
 653         };
 654         union loginfo_type sas_loginfo;
 655         char *originator_str = NULL;
 656
 657         sas_loginfo.loginfo = log_info;
 658         if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
 659                 return;
 660
 661         /* each nexus loss loginfo */
 662         if (log_info == 0x31170000)
 663                 return;
 664
 665         /* eat the loginfos associated with task aborts */
 666         if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
 667             0x31140000 || log_info == 0x31130000))
 668                 return;
 669
 670         switch (sas_loginfo.dw.originator) {
 671         case 0:
 672                 originator_str = "IOP";
 673                 break;
 674         case 1:
 675                 originator_str = "PL";
 676                 break;
 677         case 2:
 678                 originator_str = "IR";
 679                 break;
 680         }
 681
 682         pr_warn(MPT3SAS_FMT
 683                 "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n",
 684                 ioc->name, log_info,
 685              originator_str, sas_loginfo.dw.code,
 686              sas_loginfo.dw.subcode);
 687 }
 688
 689 /**
 690  * _base_display_reply_info -
 691  * @ioc: per adapter object
 692  * @smid: system request message index
 693  * @msix_index: MSIX table index supplied by the OS
 694  * @reply: reply message frame(lower 32bit addr)
 695  *
 696  * Return nothing.
 697  */
 698 static void
 699 _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 700         u32 reply)
 701 {
 702         MPI2DefaultReply_t *mpi_reply;
 703         u16 ioc_status;
 704         u32 loginfo = 0;
 705
 706         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 707         if (unlikely(!mpi_reply)) {
 708                 pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
 709                     ioc->name, __FILE__, __LINE__, __func__);
 710                 return;
 711         }
 712         ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
 713 #ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 714         if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
 715             (ioc->logging_level & MPT_DEBUG_REPLY)) {
 716                 _base_sas_ioc_info(ioc , mpi_reply,
 717                    mpt3sas_base_get_msg_frame(ioc, smid));
 718         }
 719 #endif
 720         if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
 721                 loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
 722                 _base_sas_log_info(ioc, loginfo);
 723         }
 724
 725         if (ioc_status || loginfo) {
 726                 ioc_status &= MPI2_IOCSTATUS_MASK;
 727                 mpt3sas_trigger_mpi(ioc, ioc_status, loginfo);
 728         }
 729 }
 730
 731 /**
 732  * mpt3sas_base_done - base internal command completion routine
 733  * @ioc: per adapter object
 734  * @smid: system request message index
 735  * @msix_index: MSIX table index supplied by the OS
 736  * @reply: reply message frame(lower 32bit addr)
 737  *
 738  * Return 1 meaning mf should be freed from _base_interrupt
 739  *        0 means the mf is freed from this function.
 740  */
 741 u8
 742 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 743         u32 reply)
 744 {
 745         MPI2DefaultReply_t *mpi_reply;
 746
 747         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 748         if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
 749                 return 1;
 750
 751         if (ioc->base_cmds.status == MPT3_CMD_NOT_USED)
 752                 return 1;
 753
 754         ioc->base_cmds.status |= MPT3_CMD_COMPLETE;
 755         if (mpi_reply) {
 756                 ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID;
 757                 memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
 758         }
 759         ioc->base_cmds.status &= ~MPT3_CMD_PENDING;
 760
 761         complete(&ioc->base_cmds.done);
 762         return 1;
 763 }
 764
 765 /**
 766  * _base_async_event - main callback handler for firmware asyn events
 767  * @ioc: per adapter object
 768  * @msix_index: MSIX table index supplied by the OS
 769  * @reply: reply message frame(lower 32bit addr)
 770  *
 771  * Return 1 meaning mf should be freed from _base_interrupt
 772  *        0 means the mf is freed from this function.
 773  */
 774 static u8
 775 _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
 776 {
 777         Mpi2EventNotificationReply_t *mpi_reply;
 778         Mpi2EventAckRequest_t *ack_request;
 779         u16 smid;
 780
 781         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 782         if (!mpi_reply)
 783                 return 1;
 784         if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
 785                 return 1;
 786 #ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 787         _base_display_event_data(ioc, mpi_reply);
 788 #endif
 789         if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
 790                 goto out;
 791         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
 792         if (!smid) {
 793                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
 794                     ioc->name, __func__);
 795                 goto out;
 796         }
 797
 798         ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
 799         memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
 800         ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
 801         ack_request->Event = mpi_reply->Event;
 802         ack_request->EventContext = mpi_reply->EventContext;
 803         ack_request->VF_ID = 0;  /* TODO */
 804         ack_request->VP_ID = 0;
 805         mpt3sas_base_put_smid_default(ioc, smid);
 806
 807  out:
 808
 809         /* scsih callback handler */
 810         mpt3sas_scsih_event_callback(ioc, msix_index, reply);
 811
 812         /* ctl callback handler */
 813         mpt3sas_ctl_event_callback(ioc, msix_index, reply);
 814
 815         return 1;
 816 }
 817
 818 /**
 819  * _base_get_cb_idx - obtain the callback index
 820  * @ioc: per adapter object
 821  * @smid: system request message index
 822  *
 823  * Return callback index.
 824  */
 825 static u8
 826 _base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid)
 827 {
 828         int i;
 829         u8 cb_idx;
 830
 831         if (smid < ioc->hi_priority_smid) {
 832                 i = smid - 1;
 833                 cb_idx = ioc->scsi_lookup[i].cb_idx;
 834         } else if (smid < ioc->internal_smid) {
 835                 i = smid - ioc->hi_priority_smid;
 836                 cb_idx = ioc->hpr_lookup[i].cb_idx;
 837         } else if (smid <= ioc->hba_queue_depth) {
 838                 i = smid - ioc->internal_smid;
 839                 cb_idx = ioc->internal_lookup[i].cb_idx;
 840         } else
 841                 cb_idx = 0xFF;
 842         return cb_idx;
 843 }
 844
 845 /**
 846  * _base_mask_interrupts - disable interrupts
 847  * @ioc: per adapter object
 848  *
 849  * Disabling ResetIRQ, Reply and Doorbell Interrupts
 850  *
 851  * Return nothing.
 852  */
 853 static void
 854 _base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc)
 855 {
 856         u32 him_register;
 857
 858         ioc->mask_interrupts = 1;
 859         him_register = readl(&ioc->chip->HostInterruptMask);
 860         him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
 861         writel(him_register, &ioc->chip->HostInterruptMask);
 862         readl(&ioc->chip->HostInterruptMask);
 863 }
 864
 865 /**
 866  * _base_unmask_interrupts - enable interrupts
 867  * @ioc: per adapter object
 868  *
 869  * Enabling only Reply Interrupts
 870  *
 871  * Return nothing.
 872  */
 873 static void
 874 _base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc)
 875 {
 876         u32 him_register;
 877
 878         him_register = readl(&ioc->chip->HostInterruptMask);
 879         him_register &= ~MPI2_HIM_RIM;
 880         writel(him_register, &ioc->chip->HostInterruptMask);
 881         ioc->mask_interrupts = 0;
 882 }
 883
 884 union reply_descriptor {
 885         u64 word;
 886         struct {
 887                 u32 low;
 888                 u32 high;
 889         } u;
 890 };
 891
 892 /**
 893  * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
 894  * @irq: irq number (not used)
 895  * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
 896  * @r: pt_regs pointer (not used)
 897  *
 898  * Return IRQ_HANDLE if processed, else IRQ_NONE.
 899  */
 900 static irqreturn_t
 901 _base_interrupt(int irq, void *bus_id)
 902 {
 903         struct adapter_reply_queue *reply_q = bus_id;
 904         union reply_descriptor rd;
 905         u32 completed_cmds;
 906         u8 request_desript_type;
 907         u16 smid;
 908         u8 cb_idx;
 909         u32 reply;
 910         u8 msix_index = reply_q->msix_index;
 911         struct MPT3SAS_ADAPTER *ioc = reply_q->ioc;
 912         Mpi2ReplyDescriptorsUnion_t *rpf;
 913         u8 rc;
 914
 915         if (ioc->mask_interrupts)
 916                 return IRQ_NONE;
 917
 918         if (!atomic_add_unless(&reply_q->busy, 1, 1))
 919                 return IRQ_NONE;
 920
 921         rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
 922         request_desript_type = rpf->Default.ReplyFlags
 923              & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
 924         if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
 925                 atomic_dec(&reply_q->busy);
 926                 return IRQ_NONE;
 927         }
 928
 929         completed_cmds = 0;
 930         cb_idx = 0xFF;
 931         do {
 932                 rd.word = le64_to_cpu(rpf->Words);
 933                 if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
 934                         goto out;
 935                 reply = 0;
 936                 smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
 937                 if (request_desript_type ==
 938                     MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
 939                     request_desript_type ==
 940                     MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
 941                         cb_idx = _base_get_cb_idx(ioc, smid);
 942                         if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
 943                             (likely(mpt_callbacks[cb_idx] != NULL))) {
 944                                 rc = mpt_callbacks[cb_idx](ioc, smid,
 945                                     msix_index, 0);
 946                                 if (rc)
 947                                         mpt3sas_base_free_smid(ioc, smid);
 948                         }
 949                 } else if (request_desript_type ==
 950                     MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
 951                         reply = le32_to_cpu(
 952                             rpf->AddressReply.ReplyFrameAddress);
 953                         if (reply > ioc->reply_dma_max_address ||
 954                             reply < ioc->reply_dma_min_address)
 955                                 reply = 0;
 956                         if (smid) {
 957                                 cb_idx = _base_get_cb_idx(ioc, smid);
 958                                 if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
 959                                     (likely(mpt_callbacks[cb_idx] != NULL))) {
 960                                         rc = mpt_callbacks[cb_idx](ioc, smid,
 961                                             msix_index, reply);
 962                                         if (reply)
 963                                                 _base_display_reply_info(ioc,
 964                                                     smid, msix_index, reply);
 965                                         if (rc)
 966                                                 mpt3sas_base_free_smid(ioc,
 967                                                     smid);
 968                                 }
 969                         } else {
 970                                 _base_async_event(ioc, msix_index, reply);
 971                         }
 972
 973                         /* reply free queue handling */
 974                         if (reply) {
 975                                 ioc->reply_free_host_index =
 976                                     (ioc->reply_free_host_index ==
 977                                     (ioc->reply_free_queue_depth - 1)) ?
 978                                     0 : ioc->reply_free_host_index + 1;
 979                                 ioc->reply_free[ioc->reply_free_host_index] =
 980                                     cpu_to_le32(reply);
 981                                 wmb();
 982                                 writel(ioc->reply_free_host_index,
 983                                     &ioc->chip->ReplyFreeHostIndex);
 984                         }
 985                 }
 986
 987                 rpf->Words = cpu_to_le64(ULLONG_MAX);
 988                 reply_q->reply_post_host_index =
 989                     (reply_q->reply_post_host_index ==
 990                     (ioc->reply_post_queue_depth - 1)) ? 0 :
 991                     reply_q->reply_post_host_index + 1;
 992                 request_desript_type =
 993                     reply_q->reply_post_free[reply_q->reply_post_host_index].
 994                     Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
 995                 completed_cmds++;
 996                 if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
 997                         goto out;
 998                 if (!reply_q->reply_post_host_index)
 999                         rpf = reply_q->reply_post_free;
1000                 else
1001                         rpf++;
1002         } while (1);
1003
1004  out:
1005
1006         if (!completed_cmds) {
1007                 atomic_dec(&reply_q->busy);
1008                 return IRQ_NONE;
1009         }
1010
1011         wmb();
1012
1013         /* Update Reply Post Host Index.
1014          * For those HBA's which support combined reply queue feature
1015          * 1. Get the correct Supplemental Reply Post Host Index Register.
1016          *    i.e. (msix_index / 8)th entry from Supplemental Reply Post Host
1017          *    Index Register address bank i.e replyPostRegisterIndex[],
1018          * 2. Then update this register with new reply host index value
1019          *    in ReplyPostIndex field and the MSIxIndex field with
1020          *    msix_index value reduced to a value between 0 and 7,
1021          *    using a modulo 8 operation. Since each Supplemental Reply Post
1022          *    Host Index Register supports 8 MSI-X vectors.
1023          *
1024          * For other HBA's just update the Reply Post Host Index register with
1025          * new reply host index value in ReplyPostIndex Field and msix_index
1026          * value in MSIxIndex field.
1027          */
1028         if (ioc->msix96_vector)
1029                 writel(reply_q->reply_post_host_index | ((msix_index  & 7) <<
1030                         MPI2_RPHI_MSIX_INDEX_SHIFT),
1031                         ioc->replyPostRegisterIndex[msix_index/8]);
1032         else
1033                 writel(reply_q->reply_post_host_index | (msix_index <<
1034                         MPI2_RPHI_MSIX_INDEX_SHIFT),
1035                         &ioc->chip->ReplyPostHostIndex);
1036         atomic_dec(&reply_q->busy);
1037         return IRQ_HANDLED;
1038 }
1039
1040 /**
1041  * _base_is_controller_msix_enabled - is controller support muli-reply queues
1042  * @ioc: per adapter object
1043  *
1044  */
1045 static inline int
1046 _base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc)
1047 {
1048         return (ioc->facts.IOCCapabilities &
1049             MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
1050 }
1051
1052 /**
1053  * mpt3sas_base_flush_reply_queues - flushing the MSIX reply queues
1054  * @ioc: per adapter object
1055  * Context: ISR conext
1056  *
1057  * Called when a Task Management request has completed. We want
1058  * to flush the other reply queues so all the outstanding IO has been
1059  * completed back to OS before we process the TM completetion.
1060  *
1061  * Return nothing.
1062  */
1063 void
1064 mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc)
1065 {
1066         struct adapter_reply_queue *reply_q;
1067
1068         /* If MSIX capability is turned off
1069          * then multi-queues are not enabled
1070          */
1071         if (!_base_is_controller_msix_enabled(ioc))
1072                 return;
1073
1074         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
1075                 if (ioc->shost_recovery)
1076                         return;
1077                 /* TMs are on msix_index == 0 */
1078                 if (reply_q->msix_index == 0)
1079                         continue;
1080                 _base_interrupt(reply_q->vector, (void *)reply_q);
1081         }
1082 }
1083
1084 /**
1085  * mpt3sas_base_release_callback_handler - clear interrupt callback handler
1086  * @cb_idx: callback index
1087  *
1088  * Return nothing.
1089  */
1090 void
1091 mpt3sas_base_release_callback_handler(u8 cb_idx)
1092 {
1093         mpt_callbacks[cb_idx] = NULL;
1094 }
1095
1096 /**
1097  * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler
1098  * @cb_func: callback function
1099  *
1100  * Returns cb_func.
1101  */
1102 u8
1103 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func)
1104 {
1105         u8 cb_idx;
1106
1107         for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
1108                 if (mpt_callbacks[cb_idx] == NULL)
1109                         break;
1110
1111         mpt_callbacks[cb_idx] = cb_func;
1112         return cb_idx;
1113 }
1114
1115 /**
1116  * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler
1117  *
1118  * Return nothing.
1119  */
1120 void
1121 mpt3sas_base_initialize_callback_handler(void)
1122 {
1123         u8 cb_idx;
1124
1125         for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
1126                 mpt3sas_base_release_callback_handler(cb_idx);
1127 }
1128
1129
1130 /**
1131  * _base_build_zero_len_sge - build zero length sg entry
1132  * @ioc: per adapter object
1133  * @paddr: virtual address for SGE
1134  *
1135  * Create a zero length scatter gather entry to insure the IOCs hardware has
1136  * something to use if the target device goes brain dead and tries
1137  * to send data even when none is asked for.
1138  *
1139  * Return nothing.
1140  */
1141 static void
1142 _base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr)
1143 {
1144         u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
1145             MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
1146             MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
1147             MPI2_SGE_FLAGS_SHIFT);
1148         ioc->base_add_sg_single(paddr, flags_length, -1);
1149 }
1150
1151 /**
1152  * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
1153  * @paddr: virtual address for SGE
1154  * @flags_length: SGE flags and data transfer length
1155  * @dma_addr: Physical address
1156  *
1157  * Return nothing.
1158  */
1159 static void
1160 _base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
1161 {
1162         Mpi2SGESimple32_t *sgel = paddr;
1163
1164         flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
1165             MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
1166         sgel->FlagsLength = cpu_to_le32(flags_length);
1167         sgel->Address = cpu_to_le32(dma_addr);
1168 }
1169
1170
1171 /**
1172  * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
1173  * @paddr: virtual address for SGE
1174  * @flags_length: SGE flags and data transfer length
1175  * @dma_addr: Physical address
1176  *
1177  * Return nothing.
1178  */
1179 static void
1180 _base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
1181 {
1182         Mpi2SGESimple64_t *sgel = paddr;
1183
1184         flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
1185             MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
1186         sgel->FlagsLength = cpu_to_le32(flags_length);
1187         sgel->Address = cpu_to_le64(dma_addr);
1188 }
1189
1190 /**
1191  * _base_get_chain_buffer_tracker - obtain chain tracker
1192  * @ioc: per adapter object
1193  * @smid: smid associated to an IO request
1194  *
1195  * Returns chain tracker(from ioc->free_chain_list)
1196  */
1197 static struct chain_tracker *
1198 _base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, u16 smid)
1199 {
1200         struct chain_tracker *chain_req;
1201         unsigned long flags;
1202
1203         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1204         if (list_empty(&ioc->free_chain_list)) {
1205                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1206                 dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1207                         "chain buffers not available\n", ioc->name));
1208                 return NULL;
1209         }
1210         chain_req = list_entry(ioc->free_chain_list.next,
1211             struct chain_tracker, tracker_list);
1212         list_del_init(&chain_req->tracker_list);
1213         list_add_tail(&chain_req->tracker_list,
1214             &ioc->scsi_lookup[smid - 1].chain_list);
1215         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1216         return chain_req;
1217 }
1218
1219
1220 /**
1221  * _base_build_sg - build generic sg
1222  * @ioc: per adapter object
1223  * @psge: virtual address for SGE
1224  * @data_out_dma: physical address for WRITES
1225  * @data_out_sz: data xfer size for WRITES
1226  * @data_in_dma: physical address for READS
1227  * @data_in_sz: data xfer size for READS
1228  *
1229  * Return nothing.
1230  */
1231 static void
1232 _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge,
1233         dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
1234         size_t data_in_sz)
1235 {
1236         u32 sgl_flags;
1237
1238         if (!data_out_sz && !data_in_sz) {
1239                 _base_build_zero_len_sge(ioc, psge);
1240                 return;
1241         }
1242
1243         if (data_out_sz && data_in_sz) {
1244                 /* WRITE sgel first */
1245                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1246                     MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
1247                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1248                 ioc->base_add_sg_single(psge, sgl_flags |
1249                     data_out_sz, data_out_dma);
1250
1251                 /* incr sgel */
1252                 psge += ioc->sge_size;
1253
1254                 /* READ sgel last */
1255                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1256                     MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
1257                     MPI2_SGE_FLAGS_END_OF_LIST);
1258                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1259                 ioc->base_add_sg_single(psge, sgl_flags |
1260                     data_in_sz, data_in_dma);
1261         } else if (data_out_sz) /* WRITE */ {
1262                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1263                     MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
1264                     MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
1265                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1266                 ioc->base_add_sg_single(psge, sgl_flags |
1267                     data_out_sz, data_out_dma);
1268         } else if (data_in_sz) /* READ */ {
1269                 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
1270                     MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
1271                     MPI2_SGE_FLAGS_END_OF_LIST);
1272                 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1273                 ioc->base_add_sg_single(psge, sgl_flags |
1274                     data_in_sz, data_in_dma);
1275         }
1276 }
1277
1278 /* IEEE format sgls */
1279
1280 /**
1281  * _base_add_sg_single_ieee - add sg element for IEEE format
1282  * @paddr: virtual address for SGE
1283  * @flags: SGE flags
1284  * @chain_offset: number of 128 byte elements from start of segment
1285  * @length: data transfer length
1286  * @dma_addr: Physical address
1287  *
1288  * Return nothing.
1289  */
1290 static void
1291 _base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length,
1292         dma_addr_t dma_addr)
1293 {
1294         Mpi25IeeeSgeChain64_t *sgel = paddr;
1295
1296         sgel->Flags = flags;
1297         sgel->NextChainOffset = chain_offset;
1298         sgel->Length = cpu_to_le32(length);
1299         sgel->Address = cpu_to_le64(dma_addr);
1300 }
1301
1302 /**
1303  * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format
1304  * @ioc: per adapter object
1305  * @paddr: virtual address for SGE
1306  *
1307  * Create a zero length scatter gather entry to insure the IOCs hardware has
1308  * something to use if the target device goes brain dead and tries
1309  * to send data even when none is asked for.
1310  *
1311  * Return nothing.
1312  */
1313 static void
1314 _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
1315 {
1316         u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1317                 MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
1318                 MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
1319         _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
1320 }
1321
1322 /**
1323  * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
1324  * @ioc: per adapter object
1325  * @scmd: scsi command
1326  * @smid: system request message index
1327  * Context: none.
1328  *
1329  * The main routine that builds scatter gather table from a given
1330  * scsi request sent via the .queuecommand main handler.
1331  *
1332  * Returns 0 success, anything else error
1333  */
1334 static int
1335 _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
1336         struct scsi_cmnd *scmd, u16 smid)
1337 {
1338         Mpi2SCSIIORequest_t *mpi_request;
1339         dma_addr_t chain_dma;
1340         struct scatterlist *sg_scmd;
1341         void *sg_local, *chain;
1342         u32 chain_offset;
1343         u32 chain_length;
1344         int sges_left;
1345         u32 sges_in_segment;
1346         u8 simple_sgl_flags;
1347         u8 simple_sgl_flags_last;
1348         u8 chain_sgl_flags;
1349         struct chain_tracker *chain_req;
1350
1351         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
1352
1353         /* init scatter gather flags */
1354         simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1355             MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1356         simple_sgl_flags_last = simple_sgl_flags |
1357             MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
1358         chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
1359             MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1360
1361         sg_scmd = scsi_sglist(scmd);
1362         sges_left = scsi_dma_map(scmd);
1363         if (sges_left < 0) {
1364                 sdev_printk(KERN_ERR, scmd->device,
1365                         "pci_map_sg failed: request for %d bytes!\n",
1366                         scsi_bufflen(scmd));
1367                 return -ENOMEM;
1368         }
1369
1370         sg_local = &mpi_request->SGL;
1371         sges_in_segment = (ioc->request_sz -
1372             offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
1373         if (sges_left <= sges_in_segment)
1374                 goto fill_in_last_segment;
1375
1376         mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
1377             (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
1378
1379         /* fill in main message segment when there is a chain following */
1380         while (sges_in_segment > 1) {
1381                 _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
1382                     sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1383                 sg_scmd = sg_next(sg_scmd);
1384                 sg_local += ioc->sge_size_ieee;
1385                 sges_left--;
1386                 sges_in_segment--;
1387         }
1388
1389         /* initializing the pointers */
1390         chain_req = _base_get_chain_buffer_tracker(ioc, smid);
1391         if (!chain_req)
1392                 return -1;
1393         chain = chain_req->chain_buffer;
1394         chain_dma = chain_req->chain_buffer_dma;
1395         do {
1396                 sges_in_segment = (sges_left <=
1397                     ioc->max_sges_in_chain_message) ? sges_left :
1398                     ioc->max_sges_in_chain_message;
1399                 chain_offset = (sges_left == sges_in_segment) ?
1400                     0 : sges_in_segment;
1401                 chain_length = sges_in_segment * ioc->sge_size_ieee;
1402                 if (chain_offset)
1403                         chain_length += ioc->sge_size_ieee;
1404                 _base_add_sg_single_ieee(sg_local, chain_sgl_flags,
1405                     chain_offset, chain_length, chain_dma);
1406
1407                 sg_local = chain;
1408                 if (!chain_offset)
1409                         goto fill_in_last_segment;
1410
1411                 /* fill in chain segments */
1412                 while (sges_in_segment) {
1413                         _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
1414                             sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1415                         sg_scmd = sg_next(sg_scmd);
1416                         sg_local += ioc->sge_size_ieee;
1417                         sges_left--;
1418                         sges_in_segment--;
1419                 }
1420
1421                 chain_req = _base_get_chain_buffer_tracker(ioc, smid);
1422                 if (!chain_req)
1423                         return -1;
1424                 chain = chain_req->chain_buffer;
1425                 chain_dma = chain_req->chain_buffer_dma;
1426         } while (1);
1427
1428
1429  fill_in_last_segment:
1430
1431         /* fill the last segment */
1432         while (sges_left > 0) {
1433                 if (sges_left == 1)
1434                         _base_add_sg_single_ieee(sg_local,
1435                             simple_sgl_flags_last, 0, sg_dma_len(sg_scmd),
1436                             sg_dma_address(sg_scmd));
1437                 else
1438                         _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
1439                             sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1440                 sg_scmd = sg_next(sg_scmd);
1441                 sg_local += ioc->sge_size_ieee;
1442                 sges_left--;
1443         }
1444
1445         return 0;
1446 }
1447
1448 /**
1449  * _base_build_sg_ieee - build generic sg for IEEE format
1450  * @ioc: per adapter object
1451  * @psge: virtual address for SGE
1452  * @data_out_dma: physical address for WRITES
1453  * @data_out_sz: data xfer size for WRITES
1454  * @data_in_dma: physical address for READS
1455  * @data_in_sz: data xfer size for READS
1456  *
1457  * Return nothing.
1458  */
1459 static void
1460 _base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
1461         dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
1462         size_t data_in_sz)
1463 {
1464         u8 sgl_flags;
1465
1466         if (!data_out_sz && !data_in_sz) {
1467                 _base_build_zero_len_sge_ieee(ioc, psge);
1468                 return;
1469         }
1470
1471         if (data_out_sz && data_in_sz) {
1472                 /* WRITE sgel first */
1473                 sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1474                     MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1475                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
1476                     data_out_dma);
1477
1478                 /* incr sgel */
1479                 psge += ioc->sge_size_ieee;
1480
1481                 /* READ sgel last */
1482                 sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
1483                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
1484                     data_in_dma);
1485         } else if (data_out_sz) /* WRITE */ {
1486                 sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1487                     MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
1488                     MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1489                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
1490                     data_out_dma);
1491         } else if (data_in_sz) /* READ */ {
1492                 sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
1493                     MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
1494                     MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
1495                 _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
1496                     data_in_dma);
1497         }
1498 }
1499
1500 #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
1501
1502 /**
1503  * _base_config_dma_addressing - set dma addressing
1504  * @ioc: per adapter object
1505  * @pdev: PCI device struct
1506  *
1507  * Returns 0 for success, non-zero for failure.
1508  */
1509 static int
1510 _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
1511 {
1512         struct sysinfo s;
1513         u64 consistent_dma_mask;
1514
1515         if (ioc->dma_mask)
1516                 consistent_dma_mask = DMA_BIT_MASK(64);
1517         else
1518                 consistent_dma_mask = DMA_BIT_MASK(32);
1519
1520         if (sizeof(dma_addr_t) > 4) {
1521                 const uint64_t required_mask =
1522                     dma_get_required_mask(&pdev->dev);
1523                 if ((required_mask > DMA_BIT_MASK(32)) &&
1524                     !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
1525                     !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
1526                         ioc->base_add_sg_single = &_base_add_sg_single_64;
1527                         ioc->sge_size = sizeof(Mpi2SGESimple64_t);
1528                         ioc->dma_mask = 64;
1529                         goto out;
1530                 }
1531         }
1532
1533         if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1534             && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
1535                 ioc->base_add_sg_single = &_base_add_sg_single_32;
1536                 ioc->sge_size = sizeof(Mpi2SGESimple32_t);
1537                 ioc->dma_mask = 32;
1538         } else
1539                 return -ENODEV;
1540
1541  out:
1542         si_meminfo(&s);
1543         pr_info(MPT3SAS_FMT
1544                 "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
1545                 ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));
1546
1547         return 0;
1548 }
1549
1550 static int
1551 _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
1552                                       struct pci_dev *pdev)
1553 {
1554         if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
1555                 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
1556                         return -ENODEV;
1557         }
1558         return 0;
1559 }
1560
1561 /**
1562  * _base_check_enable_msix - checks MSIX capabable.
1563  * @ioc: per adapter object
1564  *
1565  * Check to see if card is capable of MSIX, and set number
1566  * of available msix vectors
1567  */
1568 static int
1569 _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
1570 {
1571         int base;
1572         u16 message_control;
1573
1574         base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
1575         if (!base) {
1576                 dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
1577                         ioc->name));
1578                 return -EINVAL;
1579         }
1580
1581         /* get msix vector count */
1582
1583         pci_read_config_word(ioc->pdev, base + 2, &message_control);
1584         ioc->msix_vector_count = (message_control & 0x3FF) + 1;
1585         dinitprintk(ioc, pr_info(MPT3SAS_FMT
1586                 "msix is supported, vector_count(%d)\n",
1587                 ioc->name, ioc->msix_vector_count));
1588         return 0;
1589 }
1590
1591 /**
1592  * _base_free_irq - free irq
1593  * @ioc: per adapter object
1594  *
1595  * Freeing respective reply_queue from the list.
1596  */
1597 static void
1598 _base_free_irq(struct MPT3SAS_ADAPTER *ioc)
1599 {
1600         struct adapter_reply_queue *reply_q, *next;
1601
1602         if (list_empty(&ioc->reply_queue_list))
1603                 return;
1604
1605         list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
1606                 list_del(&reply_q->list);
1607                 irq_set_affinity_hint(reply_q->vector, NULL);
1608                 free_cpumask_var(reply_q->affinity_hint);
1609                 synchronize_irq(reply_q->vector);
1610                 free_irq(reply_q->vector, reply_q);
1611                 kfree(reply_q);
1612         }
1613 }
1614
1615 /**
1616  * _base_request_irq - request irq
1617  * @ioc: per adapter object
1618  * @index: msix index into vector table
1619  * @vector: irq vector
1620  *
1621  * Inserting respective reply_queue into the list.
1622  */
1623 static int
1624 _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
1625 {
1626         struct adapter_reply_queue *reply_q;
1627         int r;
1628
1629         reply_q =  kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
1630         if (!reply_q) {
1631                 pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n",
1632                     ioc->name, (int)sizeof(struct adapter_reply_queue));
1633                 return -ENOMEM;
1634         }
1635         reply_q->ioc = ioc;
1636         reply_q->msix_index = index;
1637         reply_q->vector = vector;
1638
1639         if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
1640                 return -ENOMEM;
1641         cpumask_clear(reply_q->affinity_hint);
1642
1643         atomic_set(&reply_q->busy, 0);
1644         if (ioc->msix_enable)
1645                 snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
1646                     MPT3SAS_DRIVER_NAME, ioc->id, index);
1647         else
1648                 snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
1649                     MPT3SAS_DRIVER_NAME, ioc->id);
1650         r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
1651             reply_q);
1652         if (r) {
1653                 pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n",
1654                     reply_q->name, vector);
1655                 kfree(reply_q);
1656                 return -EBUSY;
1657         }
1658
1659         INIT_LIST_HEAD(&reply_q->list);
1660         list_add_tail(&reply_q->list, &ioc->reply_queue_list);
1661         return 0;
1662 }
1663
1664 /**
1665  * _base_assign_reply_queues - assigning msix index for each cpu
1666  * @ioc: per adapter object
1667  *
1668  * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
1669  *
1670  * It would nice if we could call irq_set_affinity, however it is not
1671  * an exported symbol
1672  */
1673 static void
1674 _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
1675 {
1676         unsigned int cpu, nr_cpus, nr_msix, index = 0;
1677         struct adapter_reply_queue *reply_q;
1678
1679         if (!_base_is_controller_msix_enabled(ioc))
1680                 return;
1681
1682         memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
1683
1684         nr_cpus = num_online_cpus();
1685         nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
1686                                                ioc->facts.MaxMSIxVectors);
1687         if (!nr_msix)
1688                 return;
1689
1690         cpu = cpumask_first(cpu_online_mask);
1691
1692         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
1693
1694                 unsigned int i, group = nr_cpus / nr_msix;
1695
1696                 if (cpu >= nr_cpus)
1697                         break;
1698
1699                 if (index < nr_cpus % nr_msix)
1700                         group++;
1701
1702                 for (i = 0 ; i < group ; i++) {
1703                         ioc->cpu_msix_table[cpu] = index;
1704                         cpumask_or(reply_q->affinity_hint,
1705                                    reply_q->affinity_hint, get_cpu_mask(cpu));
1706                         cpu = cpumask_next(cpu, cpu_online_mask);
1707                 }
1708
1709                 if (irq_set_affinity_hint(reply_q->vector,
1710                                            reply_q->affinity_hint))
1711                         dinitprintk(ioc, pr_info(MPT3SAS_FMT
1712                             "error setting affinity hint for irq vector %d\n",
1713                             ioc->name, reply_q->vector));
1714                 index++;
1715         }
1716 }
1717
1718 /**
1719  * _base_disable_msix - disables msix
1720  * @ioc: per adapter object
1721  *
1722  */
1723 static void
1724 _base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
1725 {
1726         if (!ioc->msix_enable)
1727                 return;
1728         pci_disable_msix(ioc->pdev);
1729         ioc->msix_enable = 0;
1730 }
1731
1732 /**
1733  * _base_enable_msix - enables msix, failback to io_apic
1734  * @ioc: per adapter object
1735  *
1736  */
1737 static int
1738 _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
1739 {
1740         struct msix_entry *entries, *a;
1741         int r;
1742         int i;
1743         u8 try_msix = 0;
1744
1745         if (msix_disable == -1 || msix_disable == 0)
1746                 try_msix = 1;
1747
1748         if (!try_msix)
1749                 goto try_ioapic;
1750
1751         if (_base_check_enable_msix(ioc) != 0)
1752                 goto try_ioapic;
1753
1754         ioc->reply_queue_count = min_t(int, ioc->cpu_count,
1755             ioc->msix_vector_count);
1756
1757         printk(MPT3SAS_FMT "MSI-X vectors supported: %d, no of cores"
1758           ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count,
1759           ioc->cpu_count, max_msix_vectors);
1760
1761         if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
1762                 max_msix_vectors = 8;
1763
1764         if (max_msix_vectors > 0) {
1765                 ioc->reply_queue_count = min_t(int, max_msix_vectors,
1766                         ioc->reply_queue_count);
1767                 ioc->msix_vector_count = ioc->reply_queue_count;
1768         } else if (max_msix_vectors == 0)
1769                 goto try_ioapic;
1770
1771         entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
1772             GFP_KERNEL);
1773         if (!entries) {
1774                 dfailprintk(ioc, pr_info(MPT3SAS_FMT
1775                         "kcalloc failed @ at %s:%d/%s() !!!\n",
1776                         ioc->name, __FILE__, __LINE__, __func__));
1777                 goto try_ioapic;
1778         }
1779
1780         for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
1781                 a->entry = i;
1782
1783         r = pci_enable_msix_exact(ioc->pdev, entries, ioc->reply_queue_count);
1784         if (r) {
1785                 dfailprintk(ioc, pr_info(MPT3SAS_FMT
1786                         "pci_enable_msix_exact failed (r=%d) !!!\n",
1787                         ioc->name, r));
1788                 kfree(entries);
1789                 goto try_ioapic;
1790         }
1791
1792         ioc->msix_enable = 1;
1793         for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
1794                 r = _base_request_irq(ioc, i, a->vector);
1795                 if (r) {
1796                         _base_free_irq(ioc);
1797                         _base_disable_msix(ioc);
1798                         kfree(entries);
1799                         goto try_ioapic;
1800                 }
1801         }
1802
1803         kfree(entries);
1804         return 0;
1805
1806 /* failback to io_apic interrupt routing */
1807  try_ioapic:
1808
1809         ioc->reply_queue_count = 1;
1810         r = _base_request_irq(ioc, 0, ioc->pdev->irq);
1811
1812         return r;
1813 }
1814
1815 /**
1816  * mpt3sas_base_unmap_resources - free controller resources
1817  * @ioc: per adapter object
1818  */
1819 void
1820 mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
1821 {
1822         struct pci_dev *pdev = ioc->pdev;
1823
1824         dexitprintk(ioc, printk(MPT3SAS_FMT "%s\n",
1825                 ioc->name, __func__));
1826
1827         _base_free_irq(ioc);
1828         _base_disable_msix(ioc);
1829
1830         if (ioc->msix96_vector)
1831                 kfree(ioc->replyPostRegisterIndex);
1832
1833         if (ioc->chip_phys) {
1834                 iounmap(ioc->chip);
1835                 ioc->chip_phys = 0;
1836         }
1837
1838         if (pci_is_enabled(pdev)) {
1839                 pci_release_selected_regions(ioc->pdev, ioc->bars);
1840                 pci_disable_pcie_error_reporting(pdev);
1841                 pci_disable_device(pdev);
1842         }
1843 }
1844
1845 /**
1846  * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
1847  * @ioc: per adapter object
1848  *
1849  * Returns 0 for success, non-zero for failure.
1850  */
1851 int
1852 mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
1853 {
1854         struct pci_dev *pdev = ioc->pdev;
1855         u32 memap_sz;
1856         u32 pio_sz;
1857         int i, r = 0;
1858         u64 pio_chip = 0;
1859         u64 chip_phys = 0;
1860         struct adapter_reply_queue *reply_q;
1861
1862         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n",
1863             ioc->name, __func__));
1864
1865         ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1866         if (pci_enable_device_mem(pdev)) {
1867                 pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n",
1868                         ioc->name);
1869                 ioc->bars = 0;
1870                 return -ENODEV;
1871         }
1872
1873
1874         if (pci_request_selected_regions(pdev, ioc->bars,
1875             MPT3SAS_DRIVER_NAME)) {
1876                 pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
1877                         ioc->name);
1878                 ioc->bars = 0;
1879                 r = -ENODEV;
1880                 goto out_fail;
1881         }
1882
1883 /* AER (Advanced Error Reporting) hooks */
1884         pci_enable_pcie_error_reporting(pdev);
1885
1886         pci_set_master(pdev);
1887
1888
1889         if (_base_config_dma_addressing(ioc, pdev) != 0) {
1890                 pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n",
1891                     ioc->name, pci_name(pdev));
1892                 r = -ENODEV;
1893                 goto out_fail;
1894         }
1895
1896         for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) &&
1897              (!memap_sz || !pio_sz); i++) {
1898                 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
1899                         if (pio_sz)
1900                                 continue;
1901                         pio_chip = (u64)pci_resource_start(pdev, i);
1902                         pio_sz = pci_resource_len(pdev, i);
1903                 } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
1904                         if (memap_sz)
1905                                 continue;
1906                         ioc->chip_phys = pci_resource_start(pdev, i);
1907                         chip_phys = (u64)ioc->chip_phys;
1908                         memap_sz = pci_resource_len(pdev, i);
1909                         ioc->chip = ioremap(ioc->chip_phys, memap_sz);
1910                 }
1911         }
1912
1913         if (ioc->chip == NULL) {
1914                 pr_err(MPT3SAS_FMT "unable to map adapter memory! "
1915                         " or resource not found\n", ioc->name);
1916                 r = -EINVAL;
1917                 goto out_fail;
1918         }
1919
1920         _base_mask_interrupts(ioc);
1921
1922         r = _base_get_ioc_facts(ioc, CAN_SLEEP);
1923         if (r)
1924                 goto out_fail;
1925
1926         if (!ioc->rdpq_array_enable_assigned) {
1927                 ioc->rdpq_array_enable = ioc->rdpq_array_capable;
1928                 ioc->rdpq_array_enable_assigned = 1;
1929         }
1930
1931         r = _base_enable_msix(ioc);
1932         if (r)
1933                 goto out_fail;
1934
1935         /* Use the Combined reply queue feature only for SAS3 C0 & higher
1936          * revision HBAs and also only when reply queue count is greater than 8
1937          */
1938         if (ioc->msix96_vector && ioc->reply_queue_count > 8) {
1939                 /* Determine the Supplemental Reply Post Host Index Registers
1940                  * Addresse. Supplemental Reply Post Host Index Registers
1941                  * starts at offset MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET and
1942                  * each register is at offset bytes of
1943                  * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET from previous one.
1944                  */
1945                 ioc->replyPostRegisterIndex = kcalloc(
1946                      MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT,
1947                      sizeof(resource_size_t *), GFP_KERNEL);
1948                 if (!ioc->replyPostRegisterIndex) {
1949                         dfailprintk(ioc, printk(MPT3SAS_FMT
1950                         "allocation for reply Post Register Index failed!!!\n",
1951                                                                    ioc->name));
1952                         r = -ENOMEM;
1953                         goto out_fail;
1954                 }
1955
1956                 for (i = 0; i < MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT; i++) {
1957                         ioc->replyPostRegisterIndex[i] = (resource_size_t *)
1958                              ((u8 *)&ioc->chip->Doorbell +
1959                              MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
1960                              (i * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET));
1961                 }
1962         } else
1963                 ioc->msix96_vector = 0;
1964
1965         list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
1966                 pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
1967                     reply_q->name,  ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
1968                     "IO-APIC enabled"), reply_q->vector);
1969
1970         pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
1971             ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
1972         pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n",
1973             ioc->name, (unsigned long long)pio_chip, pio_sz);
1974
1975         /* Save PCI configuration state for recovery from PCI AER/EEH errors */
1976         pci_save_state(pdev);
1977         return 0;
1978
1979  out_fail:
1980         mpt3sas_base_unmap_resources(ioc);
1981         return r;
1982 }
1983
1984 /**
1985  * mpt3sas_base_get_msg_frame - obtain request mf pointer
1986  * @ioc: per adapter object
1987  * @smid: system request message index(smid zero is invalid)
1988  *
1989  * Returns virt pointer to message frame.
1990  */
1991 void *
1992 mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid)
1993 {
1994         return (void *)(ioc->request + (smid * ioc->request_sz));
1995 }
1996
1997 /**
1998  * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr
1999  * @ioc: per adapter object
2000  * @smid: system request message index
2001  *
2002  * Returns virt pointer to sense buffer.
2003  */
2004 void *
2005 mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2006 {
2007         return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
2008 }
2009
2010 /**
2011  * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr
2012  * @ioc: per adapter object
2013  * @smid: system request message index
2014  *
2015  * Returns phys pointer to the low 32bit address of the sense buffer.
2016  */
2017 __le32
2018 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2019 {
2020         return cpu_to_le32(ioc->sense_dma + ((smid - 1) *
2021             SCSI_SENSE_BUFFERSIZE));
2022 }
2023
2024 /**
2025  * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
2026  * @ioc: per adapter object
2027  * @phys_addr: lower 32 physical addr of the reply
2028  *
2029  * Converts 32bit lower physical addr into a virt address.
2030  */
2031 void *
2032 mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr)
2033 {
2034         if (!phys_addr)
2035                 return NULL;
2036         return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
2037 }
2038
2039 /**
2040  * mpt3sas_base_get_smid - obtain a free smid from internal queue
2041  * @ioc: per adapter object
2042  * @cb_idx: callback index
2043  *
2044  * Returns smid (zero is invalid)
2045  */
2046 u16
2047 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
2048 {
2049         unsigned long flags;
2050         struct request_tracker *request;
2051         u16 smid;
2052
2053         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2054         if (list_empty(&ioc->internal_free_list)) {
2055                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2056                 pr_err(MPT3SAS_FMT "%s: smid not available\n",
2057                     ioc->name, __func__);
2058                 return 0;
2059         }
2060
2061         request = list_entry(ioc->internal_free_list.next,
2062             struct request_tracker, tracker_list);
2063         request->cb_idx = cb_idx;
2064         smid = request->smid;
2065         list_del(&request->tracker_list);
2066         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2067         return smid;
2068 }
2069
2070 /**
2071  * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
2072  * @ioc: per adapter object
2073  * @cb_idx: callback index
2074  * @scmd: pointer to scsi command object
2075  *
2076  * Returns smid (zero is invalid)
2077  */
2078 u16
2079 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
2080         struct scsi_cmnd *scmd)
2081 {
2082         unsigned long flags;
2083         struct scsiio_tracker *request;
2084         u16 smid;
2085
2086         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2087         if (list_empty(&ioc->free_list)) {
2088                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2089                 pr_err(MPT3SAS_FMT "%s: smid not available\n",
2090                     ioc->name, __func__);
2091                 return 0;
2092         }
2093
2094         request = list_entry(ioc->free_list.next,
2095             struct scsiio_tracker, tracker_list);
2096         request->scmd = scmd;
2097         request->cb_idx = cb_idx;
2098         smid = request->smid;
2099         list_del(&request->tracker_list);
2100         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2101         return smid;
2102 }
2103
2104 /**
2105  * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
2106  * @ioc: per adapter object
2107  * @cb_idx: callback index
2108  *
2109  * Returns smid (zero is invalid)
2110  */
2111 u16
2112 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
2113 {
2114         unsigned long flags;
2115         struct request_tracker *request;
2116         u16 smid;
2117
2118         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2119         if (list_empty(&ioc->hpr_free_list)) {
2120                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2121                 return 0;
2122         }
2123
2124         request = list_entry(ioc->hpr_free_list.next,
2125             struct request_tracker, tracker_list);
2126         request->cb_idx = cb_idx;
2127         smid = request->smid;
2128         list_del(&request->tracker_list);
2129         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2130         return smid;
2131 }
2132
2133 /**
2134  * mpt3sas_base_free_smid - put smid back on free_list
2135  * @ioc: per adapter object
2136  * @smid: system request message index
2137  *
2138  * Return nothing.
2139  */
2140 void
2141 mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2142 {
2143         unsigned long flags;
2144         int i;
2145         struct chain_tracker *chain_req, *next;
2146
2147         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2148         if (smid < ioc->hi_priority_smid) {
2149                 /* scsiio queue */
2150                 i = smid - 1;
2151                 if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
2152                         list_for_each_entry_safe(chain_req, next,
2153                             &ioc->scsi_lookup[i].chain_list, tracker_list) {
2154                                 list_del_init(&chain_req->tracker_list);
2155                                 list_add(&chain_req->tracker_list,
2156                                     &ioc->free_chain_list);
2157                         }
2158                 }
2159                 ioc->scsi_lookup[i].cb_idx = 0xFF;
2160                 ioc->scsi_lookup[i].scmd = NULL;
2161                 list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
2162                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2163
2164                 /*
2165                  * See _wait_for_commands_to_complete() call with regards
2166                  * to this code.
2167                  */
2168                 if (ioc->shost_recovery && ioc->pending_io_count) {
2169                         if (ioc->pending_io_count == 1)
2170                                 wake_up(&ioc->reset_wq);
2171                         ioc->pending_io_count--;
2172                 }
2173                 return;
2174         } else if (smid < ioc->internal_smid) {
2175                 /* hi-priority */
2176                 i = smid - ioc->hi_priority_smid;
2177                 ioc->hpr_lookup[i].cb_idx = 0xFF;
2178                 list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list);
2179         } else if (smid <= ioc->hba_queue_depth) {
2180                 /* internal queue */
2181                 i = smid - ioc->internal_smid;
2182                 ioc->internal_lookup[i].cb_idx = 0xFF;
2183                 list_add(&ioc->internal_lookup[i].tracker_list,
2184                     &ioc->internal_free_list);
2185         }
2186         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2187 }
2188
2189 /**
2190  * _base_writeq - 64 bit write to MMIO
2191  * @ioc: per adapter object
2192  * @b: data payload
2193  * @addr: address in MMIO space
2194  * @writeq_lock: spin lock
2195  *
2196  * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
2197  * care of 32 bit environment where its not quarenteed to send the entire word
2198  * in one transfer.
2199  */
2200 #if defined(writeq) && defined(CONFIG_64BIT)
2201 static inline void
2202 _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
2203 {
2204         writeq(cpu_to_le64(b), addr);
2205 }
2206 #else
2207 static inline void
2208 _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
2209 {
2210         unsigned long flags;
2211         __u64 data_out = cpu_to_le64(b);
2212
2213         spin_lock_irqsave(writeq_lock, flags);
2214         writel((u32)(data_out), addr);
2215         writel((u32)(data_out >> 32), (addr + 4));
2216         spin_unlock_irqrestore(writeq_lock, flags);
2217 }
2218 #endif
2219
2220 static inline u8
2221 _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc)
2222 {
2223         return ioc->cpu_msix_table[raw_smp_processor_id()];
2224 }
2225
2226 /**
2227  * mpt3sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
2228  * @ioc: per adapter object
2229  * @smid: system request message index
2230  * @handle: device handle
2231  *
2232  * Return nothing.
2233  */
2234 void
2235 mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
2236 {
2237         Mpi2RequestDescriptorUnion_t descriptor;
2238         u64 *request = (u64 *)&descriptor;
2239
2240
2241         descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
2242         descriptor.SCSIIO.MSIxIndex =  _base_get_msix_index(ioc);
2243         descriptor.SCSIIO.SMID = cpu_to_le16(smid);
2244         descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
2245         descriptor.SCSIIO.LMID = 0;
2246         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2247             &ioc->scsi_lookup_lock);
2248 }
2249
2250 /**
2251  * mpt3sas_base_put_smid_fast_path - send fast path request to firmware
2252  * @ioc: per adapter object
2253  * @smid: system request message index
2254  * @handle: device handle
2255  *
2256  * Return nothing.
2257  */
2258 void
2259 mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
2260         u16 handle)
2261 {
2262         Mpi2RequestDescriptorUnion_t descriptor;
2263         u64 *request = (u64 *)&descriptor;
2264
2265         descriptor.SCSIIO.RequestFlags =
2266             MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
2267         descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
2268         descriptor.SCSIIO.SMID = cpu_to_le16(smid);
2269         descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
2270         descriptor.SCSIIO.LMID = 0;
2271         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2272             &ioc->scsi_lookup_lock);
2273 }
2274
2275 /**
2276  * mpt3sas_base_put_smid_hi_priority - send Task Managment request to firmware
2277  * @ioc: per adapter object
2278  * @smid: system request message index
2279  *
2280  * Return nothing.
2281  */
2282 void
2283 mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2284 {
2285         Mpi2RequestDescriptorUnion_t descriptor;
2286         u64 *request = (u64 *)&descriptor;
2287
2288         descriptor.HighPriority.RequestFlags =
2289             MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
2290         descriptor.HighPriority.MSIxIndex =  0;
2291         descriptor.HighPriority.SMID = cpu_to_le16(smid);
2292         descriptor.HighPriority.LMID = 0;
2293         descriptor.HighPriority.Reserved1 = 0;
2294         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2295             &ioc->scsi_lookup_lock);
2296 }
2297
2298 /**
2299  * mpt3sas_base_put_smid_default - Default, primarily used for config pages
2300  * @ioc: per adapter object
2301  * @smid: system request message index
2302  *
2303  * Return nothing.
2304  */
2305 void
2306 mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
2307 {
2308         Mpi2RequestDescriptorUnion_t descriptor;
2309         u64 *request = (u64 *)&descriptor;
2310
2311         descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
2312         descriptor.Default.MSIxIndex =  _base_get_msix_index(ioc);
2313         descriptor.Default.SMID = cpu_to_le16(smid);
2314         descriptor.Default.LMID = 0;
2315         descriptor.Default.DescriptorTypeDependent = 0;
2316         _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
2317             &ioc->scsi_lookup_lock);
2318 }
2319
2320 /**
2321  * _base_display_intel_branding - Display branding string
2322  * @ioc: per adapter object
2323  *
2324  * Return nothing.
2325  */
2326 static void
2327 _base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc)
2328 {
2329         if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
2330                 return;
2331
2332         switch (ioc->pdev->device) {
2333         case MPI25_MFGPAGE_DEVID_SAS3008:
2334                 switch (ioc->pdev->subsystem_device) {
2335                 case MPT3SAS_INTEL_RMS3JC080_SSDID:
2336                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2337                                 MPT3SAS_INTEL_RMS3JC080_BRANDING);
2338                         break;
2339
2340                 case MPT3SAS_INTEL_RS3GC008_SSDID:
2341                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2342                                 MPT3SAS_INTEL_RS3GC008_BRANDING);
2343                         break;
2344                 case MPT3SAS_INTEL_RS3FC044_SSDID:
2345                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2346                                 MPT3SAS_INTEL_RS3FC044_BRANDING);
2347                         break;
2348                 case MPT3SAS_INTEL_RS3UC080_SSDID:
2349                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2350                                 MPT3SAS_INTEL_RS3UC080_BRANDING);
2351                         break;
2352                 default:
2353                         pr_info(MPT3SAS_FMT
2354                                 "Intel(R) Controller: Subsystem ID: 0x%X\n",
2355                                 ioc->name, ioc->pdev->subsystem_device);
2356                         break;
2357                 }
2358                 break;
2359         default:
2360                 pr_info(MPT3SAS_FMT
2361                         "Intel(R) Controller: Subsystem ID: 0x%X\n",
2362                         ioc->name, ioc->pdev->subsystem_device);
2363                 break;
2364         }
2365 }
2366
2367
2368
2369 /**
2370  * _base_display_dell_branding - Display branding string
2371  * @ioc: per adapter object
2372  *
2373  * Return nothing.
2374  */
2375 static void
2376 _base_display_dell_branding(struct MPT3SAS_ADAPTER *ioc)
2377 {
2378         if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
2379                 return;
2380
2381         switch (ioc->pdev->device) {
2382         case MPI25_MFGPAGE_DEVID_SAS3008:
2383                 switch (ioc->pdev->subsystem_device) {
2384                 case MPT3SAS_DELL_12G_HBA_SSDID:
2385                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2386                                 MPT3SAS_DELL_12G_HBA_BRANDING);
2387                         break;
2388                 default:
2389                         pr_info(MPT3SAS_FMT
2390                            "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
2391                            ioc->pdev->subsystem_device);
2392                         break;
2393                 }
2394                 break;
2395         default:
2396                 pr_info(MPT3SAS_FMT
2397                         "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
2398                         ioc->pdev->subsystem_device);
2399                 break;
2400         }
2401 }
2402
2403 /**
2404  * _base_display_cisco_branding - Display branding string
2405  * @ioc: per adapter object
2406  *
2407  * Return nothing.
2408  */
2409 static void
2410 _base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc)
2411 {
2412         if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_CISCO)
2413                 return;
2414
2415         switch (ioc->pdev->device) {
2416         case MPI25_MFGPAGE_DEVID_SAS3008:
2417                 switch (ioc->pdev->subsystem_device) {
2418                 case MPT3SAS_CISCO_12G_HBA_SSDID:
2419                         pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2420                                 MPT3SAS_CISCO_12G_HBA_BRANDING);
2421                         break;
2422                 default:
2423                         pr_info(MPT3SAS_FMT
2424                           "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
2425                           ioc->name, ioc->pdev->subsystem_device);
2426                         break;
2427                 }
2428                 break;
2429         default:
2430                  pr_info(MPT3SAS_FMT
2431                         "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
2432                         ioc->name, ioc->pdev->subsystem_device);
2433                 break;
2434         }
2435 }
2436
2437 /**
2438  * _base_display_ioc_capabilities - Disply IOC's capabilities.
2439  * @ioc: per adapter object
2440  *
2441  * Return nothing.
2442  */
2443 static void
2444 _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
2445 {
2446         int i = 0;
2447         char desc[16];
2448         u32 iounit_pg1_flags;
2449         u32 bios_version;
2450
2451         bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
2452         strncpy(desc, ioc->manu_pg0.ChipName, 16);
2453         pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\
2454            "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
2455             ioc->name, desc,
2456            (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
2457            (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
2458            (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
2459            ioc->facts.FWVersion.Word & 0x000000FF,
2460            ioc->pdev->revision,
2461            (bios_version & 0xFF000000) >> 24,
2462            (bios_version & 0x00FF0000) >> 16,
2463            (bios_version & 0x0000FF00) >> 8,
2464             bios_version & 0x000000FF);
2465
2466         _base_display_intel_branding(ioc);
2467         _base_display_dell_branding(ioc);
2468         _base_display_cisco_branding(ioc);
2469
2470         pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
2471
2472         if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
2473                 pr_info("Initiator");
2474                 i++;
2475         }
2476
2477         if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
2478                 pr_info("%sTarget", i ? "," : "");
2479                 i++;
2480         }
2481
2482         i = 0;
2483         pr_info("), ");
2484         pr_info("Capabilities=(");
2485
2486         if (ioc->facts.IOCCapabilities &
2487                     MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
2488                         pr_info("Raid");
2489                         i++;
2490         }
2491
2492         if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
2493                 pr_info("%sTLR", i ? "," : "");
2494                 i++;
2495         }
2496
2497         if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
2498                 pr_info("%sMulticast", i ? "," : "");
2499                 i++;
2500         }
2501
2502         if (ioc->facts.IOCCapabilities &
2503             MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
2504                 pr_info("%sBIDI Target", i ? "," : "");
2505                 i++;
2506         }
2507
2508         if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
2509                 pr_info("%sEEDP", i ? "," : "");
2510                 i++;
2511         }
2512
2513         if (ioc->facts.IOCCapabilities &
2514             MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
2515                 pr_info("%sSnapshot Buffer", i ? "," : "");
2516                 i++;
2517         }
2518
2519         if (ioc->facts.IOCCapabilities &
2520             MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
2521                 pr_info("%sDiag Trace Buffer", i ? "," : "");
2522                 i++;
2523         }
2524
2525         if (ioc->facts.IOCCapabilities &
2526             MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
2527                 pr_info("%sDiag Extended Buffer", i ? "," : "");
2528                 i++;
2529         }
2530
2531         if (ioc->facts.IOCCapabilities &
2532             MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
2533                 pr_info("%sTask Set Full", i ? "," : "");
2534                 i++;
2535         }
2536
2537         iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
2538         if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
2539                 pr_info("%sNCQ", i ? "," : "");
2540                 i++;
2541         }
2542
2543         pr_info(")\n");
2544 }
2545
2546 /**
2547  * mpt3sas_base_update_missing_delay - change the missing delay timers
2548  * @ioc: per adapter object
2549  * @device_missing_delay: amount of time till device is reported missing
2550  * @io_missing_delay: interval IO is returned when there is a missing device
2551  *
2552  * Return nothing.
2553  *
2554  * Passed on the command line, this function will modify the device missing
2555  * delay, as well as the io missing delay. This should be called at driver
2556  * load time.
2557  */
2558 void
2559 mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
2560         u16 device_missing_delay, u8 io_missing_delay)
2561 {
2562         u16 dmd, dmd_new, dmd_orignal;
2563         u8 io_missing_delay_original;
2564         u16 sz;
2565         Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
2566         Mpi2ConfigReply_t mpi_reply;
2567         u8 num_phys = 0;
2568         u16 ioc_status;
2569
2570         mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
2571         if (!num_phys)
2572                 return;
2573
2574         sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
2575             sizeof(Mpi2SasIOUnit1PhyData_t));
2576         sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
2577         if (!sas_iounit_pg1) {
2578                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
2579                     ioc->name, __FILE__, __LINE__, __func__);
2580                 goto out;
2581         }
2582         if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
2583             sas_iounit_pg1, sz))) {
2584                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
2585                     ioc->name, __FILE__, __LINE__, __func__);
2586                 goto out;
2587         }
2588         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
2589             MPI2_IOCSTATUS_MASK;
2590         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
2591                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
2592                     ioc->name, __FILE__, __LINE__, __func__);
2593                 goto out;
2594         }
2595
2596         /* device missing delay */
2597         dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
2598         if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
2599                 dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
2600         else
2601                 dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
2602         dmd_orignal = dmd;
2603         if (device_missing_delay > 0x7F) {
2604                 dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
2605                     device_missing_delay;
2606                 dmd = dmd / 16;
2607                 dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
2608         } else
2609                 dmd = device_missing_delay;
2610         sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
2611
2612         /* io missing delay */
2613         io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
2614         sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
2615
2616         if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
2617             sz)) {
2618                 if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
2619                         dmd_new = (dmd &
2620                             MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
2621                 else
2622                         dmd_new =
2623                     dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
2624                 pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n",
2625                         ioc->name, dmd_orignal, dmd_new);
2626                 pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n",
2627                         ioc->name, io_missing_delay_original,
2628                     io_missing_delay);
2629                 ioc->device_missing_delay = dmd_new;
2630                 ioc->io_missing_delay = io_missing_delay;
2631         }
2632
2633 out:
2634         kfree(sas_iounit_pg1);
2635 }
2636 /**
2637  * _base_static_config_pages - static start of day config pages
2638  * @ioc: per adapter object
2639  *
2640  * Return nothing.
2641  */
2642 static void
2643 _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
2644 {
2645         Mpi2ConfigReply_t mpi_reply;
2646         u32 iounit_pg1_flags;
2647
2648         mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
2649         if (ioc->ir_firmware)
2650                 mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
2651                     &ioc->manu_pg10);
2652
2653         /*
2654          * Ensure correct T10 PI operation if vendor left EEDPTagMode
2655          * flag unset in NVDATA.
2656          */
2657         mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
2658         if (ioc->manu_pg11.EEDPTagMode == 0) {
2659                 pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
2660                     ioc->name);
2661                 ioc->manu_pg11.EEDPTagMode &= ~0x3;
2662                 ioc->manu_pg11.EEDPTagMode |= 0x1;
2663                 mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply,
2664                     &ioc->manu_pg11);
2665         }
2666
2667         mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
2668         mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
2669         mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
2670         mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
2671         mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
2672         mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
2673         _base_display_ioc_capabilities(ioc);
2674
2675         /*
2676          * Enable task_set_full handling in iounit_pg1 when the
2677          * facts capabilities indicate that its supported.
2678          */
2679         iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
2680         if ((ioc->facts.IOCCapabilities &
2681             MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
2682                 iounit_pg1_flags &=
2683                     ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
2684         else
2685                 iounit_pg1_flags |=
2686                     MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
2687         ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
2688         mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
2689
2690         if (ioc->iounit_pg8.NumSensors)
2691                 ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
2692 }
2693
2694 /**
2695  * _base_release_memory_pools - release memory
2696  * @ioc: per adapter object
2697  *
2698  * Free memory allocated from _base_allocate_memory_pools.
2699  *
2700  * Return nothing.
2701  */
2702 static void
2703 _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
2704 {
2705         int i = 0;
2706         struct reply_post_struct *rps;
2707
2708         dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2709             __func__));
2710
2711         if (ioc->request) {
2712                 pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
2713                     ioc->request,  ioc->request_dma);
2714                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2715                         "request_pool(0x%p): free\n",
2716                         ioc->name, ioc->request));
2717                 ioc->request = NULL;
2718         }
2719
2720         if (ioc->sense) {
2721                 pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
2722                 if (ioc->sense_dma_pool)
2723                         pci_pool_destroy(ioc->sense_dma_pool);
2724                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2725                         "sense_pool(0x%p): free\n",
2726                         ioc->name, ioc->sense));
2727                 ioc->sense = NULL;
2728         }
2729
2730         if (ioc->reply) {
2731                 pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
2732                 if (ioc->reply_dma_pool)
2733                         pci_pool_destroy(ioc->reply_dma_pool);
2734                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2735                         "reply_pool(0x%p): free\n",
2736                         ioc->name, ioc->reply));
2737                 ioc->reply = NULL;
2738         }
2739
2740         if (ioc->reply_free) {
2741                 pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
2742                     ioc->reply_free_dma);
2743                 if (ioc->reply_free_dma_pool)
2744                         pci_pool_destroy(ioc->reply_free_dma_pool);
2745                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2746                         "reply_free_pool(0x%p): free\n",
2747                         ioc->name, ioc->reply_free));
2748                 ioc->reply_free = NULL;
2749         }
2750
2751         if (ioc->reply_post) {
2752                 do {
2753                         rps = &ioc->reply_post[i];
2754                         if (rps->reply_post_free) {
2755                                 pci_pool_free(
2756                                     ioc->reply_post_free_dma_pool,
2757                                     rps->reply_post_free,
2758                                     rps->reply_post_free_dma);
2759                                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2760                                     "reply_post_free_pool(0x%p): free\n",
2761                                     ioc->name, rps->reply_post_free));
2762                                 rps->reply_post_free = NULL;
2763                         }
2764                 } while (ioc->rdpq_array_enable &&
2765                            (++i < ioc->reply_queue_count));
2766
2767                 if (ioc->reply_post_free_dma_pool)
2768                         pci_pool_destroy(ioc->reply_post_free_dma_pool);
2769                 kfree(ioc->reply_post);
2770         }
2771
2772         if (ioc->config_page) {
2773                 dexitprintk(ioc, pr_info(MPT3SAS_FMT
2774                     "config_page(0x%p): free\n", ioc->name,
2775                     ioc->config_page));
2776                 pci_free_consistent(ioc->pdev, ioc->config_page_sz,
2777                     ioc->config_page, ioc->config_page_dma);
2778         }
2779
2780         if (ioc->scsi_lookup) {
2781                 free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
2782                 ioc->scsi_lookup = NULL;
2783         }
2784         kfree(ioc->hpr_lookup);
2785         kfree(ioc->internal_lookup);
2786         if (ioc->chain_lookup) {
2787                 for (i = 0; i < ioc->chain_depth; i++) {
2788                         if (ioc->chain_lookup[i].chain_buffer)
2789                                 pci_pool_free(ioc->chain_dma_pool,
2790                                     ioc->chain_lookup[i].chain_buffer,
2791                                     ioc->chain_lookup[i].chain_buffer_dma);
2792                 }
2793                 if (ioc->chain_dma_pool)
2794                         pci_pool_destroy(ioc->chain_dma_pool);
2795                 free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
2796                 ioc->chain_lookup = NULL;
2797         }
2798 }
2799
2800 /**
2801  * _base_allocate_memory_pools - allocate start of day memory pools
2802  * @ioc: per adapter object
2803  * @sleep_flag: CAN_SLEEP or NO_SLEEP
2804  *
2805  * Returns 0 success, anything else error
2806  */
2807 static int
2808 _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
2809 {
2810         struct mpt3sas_facts *facts;
2811         u16 max_sge_elements;
2812         u16 chains_needed_per_io;
2813         u32 sz, total_sz, reply_post_free_sz;
2814         u32 retry_sz;
2815         u16 max_request_credit;
2816         unsigned short sg_tablesize;
2817         u16 sge_size;
2818         int i;
2819
2820         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
2821             __func__));
2822
2823
2824         retry_sz = 0;
2825         facts = &ioc->facts;
2826
2827         /* command line tunables for max sgl entries */
2828         if (max_sgl_entries != -1)
2829                 sg_tablesize = max_sgl_entries;
2830         else
2831                 sg_tablesize = MPT3SAS_SG_DEPTH;
2832
2833         if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
2834                 sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
2835         else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
2836                 sg_tablesize = min_t(unsigned short, sg_tablesize,
2837                                       SCSI_MAX_SG_CHAIN_SEGMENTS);
2838                 pr_warn(MPT3SAS_FMT
2839                  "sg_tablesize(%u) is bigger than kernel"
2840                  " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
2841                  sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
2842         }
2843         ioc->shost->sg_tablesize = sg_tablesize;
2844
2845         ioc->hi_priority_depth = facts->HighPriorityCredit;
2846         ioc->internal_depth = ioc->hi_priority_depth + (5);
2847         /* command line tunables  for max controller queue depth */
2848         if (max_queue_depth != -1 && max_queue_depth != 0) {
2849                 max_request_credit = min_t(u16, max_queue_depth +
2850                     ioc->hi_priority_depth + ioc->internal_depth,
2851                     facts->RequestCredit);
2852                 if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
2853                         max_request_credit =  MAX_HBA_QUEUE_DEPTH;
2854         } else
2855                 max_request_credit = min_t(u16, facts->RequestCredit,
2856                     MAX_HBA_QUEUE_DEPTH);
2857
2858         ioc->hba_queue_depth = max_request_credit;
2859
2860         /* request frame size */
2861         ioc->request_sz = facts->IOCRequestFrameSize * 4;
2862
2863         /* reply frame size */
2864         ioc->reply_sz = facts->ReplyFrameSize * 4;
2865
2866         /* calculate the max scatter element size */
2867         sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee);
2868
2869  retry_allocation:
2870         total_sz = 0;
2871         /* calculate number of sg elements left over in the 1st frame */
2872         max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
2873             sizeof(Mpi2SGEIOUnion_t)) + sge_size);
2874         ioc->max_sges_in_main_message = max_sge_elements/sge_size;
2875
2876         /* now do the same for a chain buffer */
2877         max_sge_elements = ioc->request_sz - sge_size;
2878         ioc->max_sges_in_chain_message = max_sge_elements/sge_size;
2879
2880         /*
2881          *  MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
2882          */
2883         chains_needed_per_io = ((ioc->shost->sg_tablesize -
2884            ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
2885             + 1;
2886         if (chains_needed_per_io > facts->MaxChainDepth) {
2887                 chains_needed_per_io = facts->MaxChainDepth;
2888                 ioc->shost->sg_tablesize = min_t(u16,
2889                 ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
2890                 * chains_needed_per_io), ioc->shost->sg_tablesize);
2891         }
2892         ioc->chains_needed_per_io = chains_needed_per_io;
2893
2894         /* reply free queue sizing - taking into account for 64 FW events */
2895         ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
2896
2897         /* calculate reply descriptor post queue depth */
2898         ioc->reply_post_queue_depth = ioc->hba_queue_depth +
2899                                 ioc->reply_free_queue_depth +  1 ;
2900         /* align the reply post queue on the next 16 count boundary */
2901         if (ioc->reply_post_queue_depth % 16)
2902                 ioc->reply_post_queue_depth += 16 -
2903                 (ioc->reply_post_queue_depth % 16);
2904
2905
2906         if (ioc->reply_post_queue_depth >
2907             facts->MaxReplyDescriptorPostQueueDepth) {
2908                 ioc->reply_post_queue_depth =
2909                                 facts->MaxReplyDescriptorPostQueueDepth -
2910                     (facts->MaxReplyDescriptorPostQueueDepth % 16);
2911                 ioc->hba_queue_depth =
2912                                 ((ioc->reply_post_queue_depth - 64) / 2) - 1;
2913                 ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
2914         }
2915
2916         dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \
2917             "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
2918             "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
2919             ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
2920             ioc->chains_needed_per_io));
2921
2922         /* reply post queue, 16 byte align */
2923         reply_post_free_sz = ioc->reply_post_queue_depth *
2924             sizeof(Mpi2DefaultReplyDescriptor_t);
2925
2926         sz = reply_post_free_sz;
2927         if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
2928                 sz *= ioc->reply_queue_count;
2929
2930         ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
2931             (ioc->reply_queue_count):1,
2932             sizeof(struct reply_post_struct), GFP_KERNEL);
2933
2934         if (!ioc->reply_post) {
2935                 pr_err(MPT3SAS_FMT "reply_post_free pool: kcalloc failed\n",
2936                         ioc->name);
2937                 goto out;
2938         }
2939         ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
2940             ioc->pdev, sz, 16, 0);
2941         if (!ioc->reply_post_free_dma_pool) {
2942                 pr_err(MPT3SAS_FMT
2943                  "reply_post_free pool: pci_pool_create failed\n",
2944                  ioc->name);
2945                 goto out;
2946         }
2947         i = 0;
2948         do {
2949                 ioc->reply_post[i].reply_post_free =
2950                     pci_pool_alloc(ioc->reply_post_free_dma_pool,
2951                     GFP_KERNEL,
2952                     &ioc->reply_post[i].reply_post_free_dma);
2953                 if (!ioc->reply_post[i].reply_post_free) {
2954                         pr_err(MPT3SAS_FMT
2955                         "reply_post_free pool: pci_pool_alloc failed\n",
2956                         ioc->name);
2957                         goto out;
2958                 }
2959                 memset(ioc->reply_post[i].reply_post_free, 0, sz);
2960                 dinitprintk(ioc, pr_info(MPT3SAS_FMT
2961                     "reply post free pool (0x%p): depth(%d),"
2962                     "element_size(%d), pool_size(%d kB)\n", ioc->name,
2963                     ioc->reply_post[i].reply_post_free,
2964                     ioc->reply_post_queue_depth, 8, sz/1024));
2965                 dinitprintk(ioc, pr_info(MPT3SAS_FMT
2966                     "reply_post_free_dma = (0x%llx)\n", ioc->name,
2967                     (unsigned long long)
2968                     ioc->reply_post[i].reply_post_free_dma));
2969                 total_sz += sz;
2970         } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
2971
2972         if (ioc->dma_mask == 64) {
2973                 if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
2974                         pr_warn(MPT3SAS_FMT
2975                             "no suitable consistent DMA mask for %s\n",
2976                             ioc->name, pci_name(ioc->pdev));
2977                         goto out;
2978                 }
2979         }
2980
2981         ioc->scsiio_depth = ioc->hba_queue_depth -
2982             ioc->hi_priority_depth - ioc->internal_depth;
2983
2984         /* set the scsi host can_queue depth
2985          * with some internal commands that could be outstanding
2986          */
2987         ioc->shost->can_queue = ioc->scsiio_depth;
2988         dinitprintk(ioc, pr_info(MPT3SAS_FMT
2989                 "scsi host: can_queue depth (%d)\n",
2990                 ioc->name, ioc->shost->can_queue));
2991
2992
2993         /* contiguous pool for request and chains, 16 byte align, one extra "
2994          * "frame for smid=0
2995          */
2996         ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
2997         sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
2998
2999         /* hi-priority queue */
3000         sz += (ioc->hi_priority_depth * ioc->request_sz);
3001
3002         /* internal queue */
3003         sz += (ioc->internal_depth * ioc->request_sz);
3004
3005         ioc->request_dma_sz = sz;
3006         ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
3007         if (!ioc->request) {
3008                 pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
3009                     "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
3010                     "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
3011                     ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
3012                 if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH)
3013                         goto out;
3014                 retry_sz += 64;
3015                 ioc->hba_queue_depth = max_request_credit - retry_sz;
3016                 goto retry_allocation;
3017         }
3018
3019         if (retry_sz)
3020                 pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
3021                     "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
3022                     "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
3023                     ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
3024
3025         /* hi-priority queue */
3026         ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
3027             ioc->request_sz);
3028         ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
3029             ioc->request_sz);
3030
3031         /* internal queue */
3032         ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
3033             ioc->request_sz);
3034         ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
3035             ioc->request_sz);
3036
3037         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3038                 "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
3039                 ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz,
3040             (ioc->hba_queue_depth * ioc->request_sz)/1024));
3041
3042         dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n",
3043             ioc->name, (unsigned long long) ioc->request_dma));
3044         total_sz += sz;
3045
3046         sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
3047         ioc->scsi_lookup_pages = get_order(sz);
3048         ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
3049             GFP_KERNEL, ioc->scsi_lookup_pages);
3050         if (!ioc->scsi_lookup) {
3051                 pr_err(MPT3SAS_FMT "scsi_lookup: get_free_pages failed, sz(%d)\n",
3052                         ioc->name, (int)sz);
3053                 goto out;
3054         }
3055
3056         dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n",
3057                 ioc->name, ioc->request, ioc->scsiio_depth));
3058
3059         ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
3060         sz = ioc->chain_depth * sizeof(struct chain_tracker);
3061         ioc->chain_pages = get_order(sz);
3062         ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
3063             GFP_KERNEL, ioc->chain_pages);
3064         if (!ioc->chain_lookup) {
3065                 pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages failed\n",
3066                         ioc->name);
3067                 goto out;
3068         }
3069         ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
3070             ioc->request_sz, 16, 0);
3071         if (!ioc->chain_dma_pool) {
3072                 pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n",
3073                         ioc->name);
3074                 goto out;
3075         }
3076         for (i = 0; i < ioc->chain_depth; i++) {
3077                 ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
3078                     ioc->chain_dma_pool , GFP_KERNEL,
3079                     &ioc->chain_lookup[i].chain_buffer_dma);
3080                 if (!ioc->chain_lookup[i].chain_buffer) {
3081                         ioc->chain_depth = i;
3082                         goto chain_done;
3083                 }
3084                 total_sz += ioc->request_sz;
3085         }
3086  chain_done:
3087         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3088                 "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
3089                 ioc->name, ioc->chain_depth, ioc->request_sz,
3090                 ((ioc->chain_depth *  ioc->request_sz))/1024));
3091
3092         /* initialize hi-priority queue smid's */
3093         ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
3094             sizeof(struct request_tracker), GFP_KERNEL);
3095         if (!ioc->hpr_lookup) {
3096                 pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n",
3097                     ioc->name);
3098                 goto out;
3099         }
3100         ioc->hi_priority_smid = ioc->scsiio_depth + 1;
3101         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3102                 "hi_priority(0x%p): depth(%d), start smid(%d)\n",
3103                 ioc->name, ioc->hi_priority,
3104             ioc->hi_priority_depth, ioc->hi_priority_smid));
3105
3106         /* initialize internal queue smid's */
3107         ioc->internal_lookup = kcalloc(ioc->internal_depth,
3108             sizeof(struct request_tracker), GFP_KERNEL);
3109         if (!ioc->internal_lookup) {
3110                 pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n",
3111                     ioc->name);
3112                 goto out;
3113         }
3114         ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
3115         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3116                 "internal(0x%p): depth(%d), start smid(%d)\n",
3117                 ioc->name, ioc->internal,
3118             ioc->internal_depth, ioc->internal_smid));
3119
3120         /* sense buffers, 4 byte align */
3121         sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
3122         ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
3123             0);
3124         if (!ioc->sense_dma_pool) {
3125                 pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n",
3126                     ioc->name);
3127                 goto out;
3128         }
3129         ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
3130             &ioc->sense_dma);
3131         if (!ioc->sense) {
3132                 pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n",
3133                     ioc->name);
3134                 goto out;
3135         }
3136         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3137             "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
3138             "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
3139             SCSI_SENSE_BUFFERSIZE, sz/1024));
3140         dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n",
3141             ioc->name, (unsigned long long)ioc->sense_dma));
3142         total_sz += sz;
3143
3144         /* reply pool, 4 byte align */
3145         sz = ioc->reply_free_queue_depth * ioc->reply_sz;
3146         ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
3147             0);
3148         if (!ioc->reply_dma_pool) {
3149                 pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n",
3150                     ioc->name);
3151                 goto out;
3152         }
3153         ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
3154             &ioc->reply_dma);
3155         if (!ioc->reply) {
3156                 pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n",
3157                     ioc->name);
3158                 goto out;
3159         }
3160         ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
3161         ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
3162         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3163                 "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
3164                 ioc->name, ioc->reply,
3165             ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
3166         dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n",
3167             ioc->name, (unsigned long long)ioc->reply_dma));
3168         total_sz += sz;
3169
3170         /* reply free queue, 16 byte align */
3171         sz = ioc->reply_free_queue_depth * 4;
3172         ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
3173             ioc->pdev, sz, 16, 0);
3174         if (!ioc->reply_free_dma_pool) {
3175                 pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n",
3176                         ioc->name);
3177                 goto out;
3178         }
3179         ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
3180             &ioc->reply_free_dma);
3181         if (!ioc->reply_free) {
3182                 pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n",
3183                         ioc->name);
3184                 goto out;
3185         }
3186         memset(ioc->reply_free, 0, sz);
3187         dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \
3188             "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
3189             ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
3190         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3191                 "reply_free_dma (0x%llx)\n",
3192                 ioc->name, (unsigned long long)ioc->reply_free_dma));
3193         total_sz += sz;
3194
3195         ioc->config_page_sz = 512;
3196         ioc->config_page = pci_alloc_consistent(ioc->pdev,
3197             ioc->config_page_sz, &ioc->config_page_dma);
3198         if (!ioc->config_page) {
3199                 pr_err(MPT3SAS_FMT
3200                         "config page: pci_pool_alloc failed\n",
3201                         ioc->name);
3202                 goto out;
3203         }
3204         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3205                 "config page(0x%p): size(%d)\n",
3206                 ioc->name, ioc->config_page, ioc->config_page_sz));
3207         dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n",
3208                 ioc->name, (unsigned long long)ioc->config_page_dma));
3209         total_sz += ioc->config_page_sz;
3210
3211         pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n",
3212             ioc->name, total_sz/1024);
3213         pr_info(MPT3SAS_FMT
3214                 "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n",
3215             ioc->name, ioc->shost->can_queue, facts->RequestCredit);
3216         pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n",
3217             ioc->name, ioc->shost->sg_tablesize);
3218         return 0;
3219
3220  out:
3221         return -ENOMEM;
3222 }
3223
3224 /**
3225  * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter.
3226  * @ioc: Pointer to MPT_ADAPTER structure
3227  * @cooked: Request raw or cooked IOC state
3228  *
3229  * Returns all IOC Doorbell register bits if cooked==0, else just the
3230  * Doorbell bits in MPI_IOC_STATE_MASK.
3231  */
3232 u32
3233 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
3234 {
3235         u32 s, sc;
3236
3237         s = readl(&ioc->chip->Doorbell);
3238         sc = s & MPI2_IOC_STATE_MASK;
3239         return cooked ? sc : s;
3240 }
3241
3242 /**
3243  * _base_wait_on_iocstate - waiting on a particular ioc state
3244  * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
3245  * @timeout: timeout in second
3246  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3247  *
3248  * Returns 0 for success, non-zero for failure.
3249  */
3250 static int
3251 _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
3252         int sleep_flag)
3253 {
3254         u32 count, cntdn;
3255         u32 current_state;
3256
3257         count = 0;
3258         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3259         do {
3260                 current_state = mpt3sas_base_get_iocstate(ioc, 1);
3261                 if (current_state == ioc_state)
3262                         return 0;
3263                 if (count && current_state == MPI2_IOC_STATE_FAULT)
3264                         break;
3265                 if (sleep_flag == CAN_SLEEP)
3266                         usleep_range(1000, 1500);
3267                 else
3268                         udelay(500);
3269                 count++;
3270         } while (--cntdn);
3271
3272         return current_state;
3273 }
3274
3275 /**
3276  * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
3277  * a write to the doorbell)
3278  * @ioc: per adapter object
3279  * @timeout: timeout in second
3280  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3281  *
3282  * Returns 0 for success, non-zero for failure.
3283  *
3284  * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
3285  */
3286 static int
3287 _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
3288
3289 static int
3290 _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
3291         int sleep_flag)
3292 {
3293         u32 cntdn, count;
3294         u32 int_status;
3295
3296         count = 0;
3297         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3298         do {
3299                 int_status = readl(&ioc->chip->HostInterruptStatus);
3300                 if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
3301                         dhsprintk(ioc, pr_info(MPT3SAS_FMT
3302                                 "%s: successful count(%d), timeout(%d)\n",
3303                                 ioc->name, __func__, count, timeout));
3304                         return 0;
3305                 }
3306                 if (sleep_flag == CAN_SLEEP)
3307                         usleep_range(1000, 1500);
3308                 else
3309                         udelay(500);
3310                 count++;
3311         } while (--cntdn);
3312
3313         pr_err(MPT3SAS_FMT
3314                 "%s: failed due to timeout count(%d), int_status(%x)!\n",
3315                 ioc->name, __func__, count, int_status);
3316         return -EFAULT;
3317 }
3318
3319 /**
3320  * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
3321  * @ioc: per adapter object
3322  * @timeout: timeout in second
3323  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3324  *
3325  * Returns 0 for success, non-zero for failure.
3326  *
3327  * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
3328  * doorbell.
3329  */
3330 static int
3331 _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
3332         int sleep_flag)
3333 {
3334         u32 cntdn, count;
3335         u32 int_status;
3336         u32 doorbell;
3337
3338         count = 0;
3339         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3340         do {
3341                 int_status = readl(&ioc->chip->HostInterruptStatus);
3342                 if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
3343                         dhsprintk(ioc, pr_info(MPT3SAS_FMT
3344                                 "%s: successful count(%d), timeout(%d)\n",
3345                                 ioc->name, __func__, count, timeout));
3346                         return 0;
3347                 } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
3348                         doorbell = readl(&ioc->chip->Doorbell);
3349                         if ((doorbell & MPI2_IOC_STATE_MASK) ==
3350                             MPI2_IOC_STATE_FAULT) {
3351                                 mpt3sas_base_fault_info(ioc , doorbell);
3352                                 return -EFAULT;
3353                         }
3354                 } else if (int_status == 0xFFFFFFFF)
3355                         goto out;
3356
3357                 if (sleep_flag == CAN_SLEEP)
3358                         usleep_range(1000, 1500);
3359                 else
3360                         udelay(500);
3361                 count++;
3362         } while (--cntdn);
3363
3364  out:
3365         pr_err(MPT3SAS_FMT
3366          "%s: failed due to timeout count(%d), int_status(%x)!\n",
3367          ioc->name, __func__, count, int_status);
3368         return -EFAULT;
3369 }
3370
3371 /**
3372  * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
3373  * @ioc: per adapter object
3374  * @timeout: timeout in second
3375  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3376  *
3377  * Returns 0 for success, non-zero for failure.
3378  *
3379  */
3380 static int
3381 _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
3382         int sleep_flag)
3383 {
3384         u32 cntdn, count;
3385         u32 doorbell_reg;
3386
3387         count = 0;
3388         cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
3389         do {
3390                 doorbell_reg = readl(&ioc->chip->Doorbell);
3391                 if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
3392                         dhsprintk(ioc, pr_info(MPT3SAS_FMT
3393                                 "%s: successful count(%d), timeout(%d)\n",
3394                                 ioc->name, __func__, count, timeout));
3395                         return 0;
3396                 }
3397                 if (sleep_flag == CAN_SLEEP)
3398                         usleep_range(1000, 1500);
3399                 else
3400                         udelay(500);
3401                 count++;
3402         } while (--cntdn);
3403
3404         pr_err(MPT3SAS_FMT
3405                 "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n",
3406                 ioc->name, __func__, count, doorbell_reg);
3407         return -EFAULT;
3408 }
3409
3410 /**
3411  * _base_send_ioc_reset - send doorbell reset
3412  * @ioc: per adapter object
3413  * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
3414  * @timeout: timeout in second
3415  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3416  *
3417  * Returns 0 for success, non-zero for failure.
3418  */
3419 static int
3420 _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
3421         int sleep_flag)
3422 {
3423         u32 ioc_state;
3424         int r = 0;
3425
3426         if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
3427                 pr_err(MPT3SAS_FMT "%s: unknown reset_type\n",
3428                     ioc->name, __func__);
3429                 return -EFAULT;
3430         }
3431
3432         if (!(ioc->facts.IOCCapabilities &
3433            MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
3434                 return -EFAULT;
3435
3436         pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name);
3437
3438         writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
3439             &ioc->chip->Doorbell);
3440         if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
3441                 r = -EFAULT;
3442                 goto out;
3443         }
3444         ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
3445             timeout, sleep_flag);
3446         if (ioc_state) {
3447                 pr_err(MPT3SAS_FMT
3448                         "%s: failed going to ready state (ioc_state=0x%x)\n",
3449                         ioc->name, __func__, ioc_state);
3450                 r = -EFAULT;
3451                 goto out;
3452         }
3453  out:
3454         pr_info(MPT3SAS_FMT "message unit reset: %s\n",
3455             ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
3456         return r;
3457 }
3458
3459 /**
3460  * _base_handshake_req_reply_wait - send request thru doorbell interface
3461  * @ioc: per adapter object
3462  * @request_bytes: request length
3463  * @request: pointer having request payload
3464  * @reply_bytes: reply length
3465  * @reply: pointer to reply payload
3466  * @timeout: timeout in second
3467  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3468  *
3469  * Returns 0 for success, non-zero for failure.
3470  */
3471 static int
3472 _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
3473         u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
3474 {
3475         MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
3476         int i;
3477         u8 failed;
3478         u16 dummy;
3479         __le32 *mfp;
3480
3481         /* make sure doorbell is not in use */
3482         if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
3483                 pr_err(MPT3SAS_FMT
3484                         "doorbell is in use (line=%d)\n",
3485                         ioc->name, __LINE__);
3486                 return -EFAULT;
3487         }
3488
3489         /* clear pending doorbell interrupts from previous state changes */
3490         if (readl(&ioc->chip->HostInterruptStatus) &
3491             MPI2_HIS_IOC2SYS_DB_STATUS)
3492                 writel(0, &ioc->chip->HostInterruptStatus);
3493
3494         /* send message to ioc */
3495         writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
3496             ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
3497             &ioc->chip->Doorbell);
3498
3499         if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
3500                 pr_err(MPT3SAS_FMT
3501                         "doorbell handshake int failed (line=%d)\n",
3502                         ioc->name, __LINE__);
3503                 return -EFAULT;
3504         }
3505         writel(0, &ioc->chip->HostInterruptStatus);
3506
3507         if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
3508                 pr_err(MPT3SAS_FMT
3509                         "doorbell handshake ack failed (line=%d)\n",
3510                         ioc->name, __LINE__);
3511                 return -EFAULT;
3512         }
3513
3514         /* send message 32-bits at a time */
3515         for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
3516                 writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
3517                 if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
3518                         failed = 1;
3519         }
3520
3521         if (failed) {
3522                 pr_err(MPT3SAS_FMT
3523                         "doorbell handshake sending request failed (line=%d)\n",
3524                         ioc->name, __LINE__);
3525                 return -EFAULT;
3526         }
3527
3528         /* now wait for the reply */
3529         if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
3530                 pr_err(MPT3SAS_FMT
3531                         "doorbell handshake int failed (line=%d)\n",
3532                         ioc->name, __LINE__);
3533                 return -EFAULT;
3534         }
3535
3536         /* read the first two 16-bits, it gives the total length of the reply */
3537         reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
3538             & MPI2_DOORBELL_DATA_MASK);
3539         writel(0, &ioc->chip->HostInterruptStatus);
3540         if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
3541                 pr_err(MPT3SAS_FMT
3542                         "doorbell handshake int failed (line=%d)\n",
3543                         ioc->name, __LINE__);
3544                 return -EFAULT;
3545         }
3546         reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
3547             & MPI2_DOORBELL_DATA_MASK);
3548         writel(0, &ioc->chip->HostInterruptStatus);
3549
3550         for (i = 2; i < default_reply->MsgLength * 2; i++)  {
3551                 if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
3552                         pr_err(MPT3SAS_FMT
3553                                 "doorbell handshake int failed (line=%d)\n",
3554                                 ioc->name, __LINE__);
3555                         return -EFAULT;
3556                 }
3557                 if (i >=  reply_bytes/2) /* overflow case */
3558                         dummy = readl(&ioc->chip->Doorbell);
3559                 else
3560                         reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
3561                             & MPI2_DOORBELL_DATA_MASK);
3562                 writel(0, &ioc->chip->HostInterruptStatus);
3563         }
3564
3565         _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
3566         if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
3567                 dhsprintk(ioc, pr_info(MPT3SAS_FMT
3568                         "doorbell is in use (line=%d)\n", ioc->name, __LINE__));
3569         }
3570         writel(0, &ioc->chip->HostInterruptStatus);
3571
3572         if (ioc->logging_level & MPT_DEBUG_INIT) {
3573                 mfp = (__le32 *)reply;
3574                 pr_info("\toffset:data\n");
3575                 for (i = 0; i < reply_bytes/4; i++)
3576                         pr_info("\t[0x%02x]:%08x\n", i*4,
3577                             le32_to_cpu(mfp[i]));
3578         }
3579         return 0;
3580 }
3581
3582 /**
3583  * mpt3sas_base_sas_iounit_control - send sas iounit control to FW
3584  * @ioc: per adapter object
3585  * @mpi_reply: the reply payload from FW
3586  * @mpi_request: the request payload sent to FW
3587  *
3588  * The SAS IO Unit Control Request message allows the host to perform low-level
3589  * operations, such as resets on the PHYs of the IO Unit, also allows the host
3590  * to obtain the IOC assigned device handles for a device if it has other
3591  * identifying information about the device, in addition allows the host to
3592  * remove IOC resources associated with the device.
3593  *
3594  * Returns 0 for success, non-zero for failure.
3595  */
3596 int
3597 mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
3598         Mpi2SasIoUnitControlReply_t *mpi_reply,
3599         Mpi2SasIoUnitControlRequest_t *mpi_request)
3600 {
3601         u16 smid;
3602         u32 ioc_state;
3603         unsigned long timeleft;
3604         bool issue_reset = false;
3605         int rc;
3606         void *request;
3607         u16 wait_state_count;
3608
3609         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3610             __func__));
3611
3612         mutex_lock(&ioc->base_cmds.mutex);
3613
3614         if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
3615                 pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
3616                     ioc->name, __func__);
3617                 rc = -EAGAIN;
3618                 goto out;
3619         }
3620
3621         wait_state_count = 0;
3622         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3623         while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3624                 if (wait_state_count++ == 10) {
3625                         pr_err(MPT3SAS_FMT
3626                             "%s: failed due to ioc not operational\n",
3627                             ioc->name, __func__);
3628                         rc = -EFAULT;
3629                         goto out;
3630                 }
3631                 ssleep(1);
3632                 ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3633                 pr_info(MPT3SAS_FMT
3634                         "%s: waiting for operational state(count=%d)\n",
3635                         ioc->name, __func__, wait_state_count);
3636         }
3637
3638         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
3639         if (!smid) {
3640                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
3641                     ioc->name, __func__);
3642                 rc = -EAGAIN;
3643                 goto out;
3644         }
3645
3646         rc = 0;
3647         ioc->base_cmds.status = MPT3_CMD_PENDING;
3648         request = mpt3sas_base_get_msg_frame(ioc, smid);
3649         ioc->base_cmds.smid = smid;
3650         memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
3651         if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
3652             mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
3653                 ioc->ioc_link_reset_in_progress = 1;
3654         init_completion(&ioc->base_cmds.done);
3655         mpt3sas_base_put_smid_default(ioc, smid);
3656         timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
3657             msecs_to_jiffies(10000));
3658         if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
3659             mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
3660             ioc->ioc_link_reset_in_progress)
3661                 ioc->ioc_link_reset_in_progress = 0;
3662         if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
3663                 pr_err(MPT3SAS_FMT "%s: timeout\n",
3664                     ioc->name, __func__);
3665                 _debug_dump_mf(mpi_request,
3666                     sizeof(Mpi2SasIoUnitControlRequest_t)/4);
3667                 if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
3668                         issue_reset = true;
3669                 goto issue_host_reset;
3670         }
3671         if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
3672                 memcpy(mpi_reply, ioc->base_cmds.reply,
3673                     sizeof(Mpi2SasIoUnitControlReply_t));
3674         else
3675                 memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
3676         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3677         goto out;
3678
3679  issue_host_reset:
3680         if (issue_reset)
3681                 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
3682                     FORCE_BIG_HAMMER);
3683         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3684         rc = -EFAULT;
3685  out:
3686         mutex_unlock(&ioc->base_cmds.mutex);
3687         return rc;
3688 }
3689
3690 /**
3691  * mpt3sas_base_scsi_enclosure_processor - sending request to sep device
3692  * @ioc: per adapter object
3693  * @mpi_reply: the reply payload from FW
3694  * @mpi_request: the request payload sent to FW
3695  *
3696  * The SCSI Enclosure Processor request message causes the IOC to
3697  * communicate with SES devices to control LED status signals.
3698  *
3699  * Returns 0 for success, non-zero for failure.
3700  */
3701 int
3702 mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
3703         Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
3704 {
3705         u16 smid;
3706         u32 ioc_state;
3707         unsigned long timeleft;
3708         bool issue_reset = false;
3709         int rc;
3710         void *request;
3711         u16 wait_state_count;
3712
3713         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3714             __func__));
3715
3716         mutex_lock(&ioc->base_cmds.mutex);
3717
3718         if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
3719                 pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
3720                     ioc->name, __func__);
3721                 rc = -EAGAIN;
3722                 goto out;
3723         }
3724
3725         wait_state_count = 0;
3726         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3727         while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3728                 if (wait_state_count++ == 10) {
3729                         pr_err(MPT3SAS_FMT
3730                             "%s: failed due to ioc not operational\n",
3731                             ioc->name, __func__);
3732                         rc = -EFAULT;
3733                         goto out;
3734                 }
3735                 ssleep(1);
3736                 ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3737                 pr_info(MPT3SAS_FMT
3738                         "%s: waiting for operational state(count=%d)\n",
3739                         ioc->name,
3740                     __func__, wait_state_count);
3741         }
3742
3743         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
3744         if (!smid) {
3745                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
3746                     ioc->name, __func__);
3747                 rc = -EAGAIN;
3748                 goto out;
3749         }
3750
3751         rc = 0;
3752         ioc->base_cmds.status = MPT3_CMD_PENDING;
3753         request = mpt3sas_base_get_msg_frame(ioc, smid);
3754         ioc->base_cmds.smid = smid;
3755         memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
3756         init_completion(&ioc->base_cmds.done);
3757         mpt3sas_base_put_smid_default(ioc, smid);
3758         timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
3759             msecs_to_jiffies(10000));
3760         if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
3761                 pr_err(MPT3SAS_FMT "%s: timeout\n",
3762                     ioc->name, __func__);
3763                 _debug_dump_mf(mpi_request,
3764                     sizeof(Mpi2SepRequest_t)/4);
3765                 if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
3766                         issue_reset = false;
3767                 goto issue_host_reset;
3768         }
3769         if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
3770                 memcpy(mpi_reply, ioc->base_cmds.reply,
3771                     sizeof(Mpi2SepReply_t));
3772         else
3773                 memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
3774         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3775         goto out;
3776
3777  issue_host_reset:
3778         if (issue_reset)
3779                 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
3780                     FORCE_BIG_HAMMER);
3781         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
3782         rc = -EFAULT;
3783  out:
3784         mutex_unlock(&ioc->base_cmds.mutex);
3785         return rc;
3786 }
3787
3788 /**
3789  * _base_get_port_facts - obtain port facts reply and save in ioc
3790  * @ioc: per adapter object
3791  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3792  *
3793  * Returns 0 for success, non-zero for failure.
3794  */
3795 static int
3796 _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
3797 {
3798         Mpi2PortFactsRequest_t mpi_request;
3799         Mpi2PortFactsReply_t mpi_reply;
3800         struct mpt3sas_port_facts *pfacts;
3801         int mpi_reply_sz, mpi_request_sz, r;
3802
3803         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3804             __func__));
3805
3806         mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
3807         mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
3808         memset(&mpi_request, 0, mpi_request_sz);
3809         mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
3810         mpi_request.PortNumber = port;
3811         r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
3812             (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
3813
3814         if (r != 0) {
3815                 pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
3816                     ioc->name, __func__, r);
3817                 return r;
3818         }
3819
3820         pfacts = &ioc->pfacts[port];
3821         memset(pfacts, 0, sizeof(struct mpt3sas_port_facts));
3822         pfacts->PortNumber = mpi_reply.PortNumber;
3823         pfacts->VP_ID = mpi_reply.VP_ID;
3824         pfacts->VF_ID = mpi_reply.VF_ID;
3825         pfacts->MaxPostedCmdBuffers =
3826             le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
3827
3828         return 0;
3829 }
3830
3831 /**
3832  * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
3833  * @ioc: per adapter object
3834  * @timeout:
3835  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3836  *
3837  * Returns 0 for success, non-zero for failure.
3838  */
3839 static int
3840 _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
3841         int sleep_flag)
3842 {
3843         u32 ioc_state;
3844         int rc;
3845
3846         dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
3847             __func__));
3848
3849         if (ioc->pci_error_recovery) {
3850                 dfailprintk(ioc, printk(MPT3SAS_FMT
3851                     "%s: host in pci error recovery\n", ioc->name, __func__));
3852                 return -EFAULT;
3853         }
3854
3855         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
3856         dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
3857             ioc->name, __func__, ioc_state));
3858
3859         if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
3860             (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
3861                 return 0;
3862
3863         if (ioc_state & MPI2_DOORBELL_USED) {
3864                 dhsprintk(ioc, printk(MPT3SAS_FMT
3865                     "unexpected doorbell active!\n", ioc->name));
3866                 goto issue_diag_reset;
3867         }
3868
3869         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
3870                 mpt3sas_base_fault_info(ioc, ioc_state &
3871                     MPI2_DOORBELL_DATA_MASK);
3872                 goto issue_diag_reset;
3873         }
3874
3875         ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
3876             timeout, sleep_flag);
3877         if (ioc_state) {
3878                 dfailprintk(ioc, printk(MPT3SAS_FMT
3879                     "%s: failed going to ready state (ioc_state=0x%x)\n",
3880                     ioc->name, __func__, ioc_state));
3881                 return -EFAULT;
3882         }
3883
3884  issue_diag_reset:
3885         rc = _base_diag_reset(ioc, sleep_flag);
3886         return rc;
3887 }
3888
3889 /**
3890  * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
3891  * @ioc: per adapter object
3892  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3893  *
3894  * Returns 0 for success, non-zero for failure.
3895  */
3896 static int
3897 _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
3898 {
3899         Mpi2IOCFactsRequest_t mpi_request;
3900         Mpi2IOCFactsReply_t mpi_reply;
3901         struct mpt3sas_facts *facts;
3902         int mpi_reply_sz, mpi_request_sz, r;
3903
3904         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3905             __func__));
3906
3907         r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
3908         if (r) {
3909                 dfailprintk(ioc, printk(MPT3SAS_FMT
3910                     "%s: failed getting to correct state\n",
3911                     ioc->name, __func__));
3912                 return r;
3913         }
3914         mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
3915         mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
3916         memset(&mpi_request, 0, mpi_request_sz);
3917         mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
3918         r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
3919             (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
3920
3921         if (r != 0) {
3922                 pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
3923                     ioc->name, __func__, r);
3924                 return r;
3925         }
3926
3927         facts = &ioc->facts;
3928         memset(facts, 0, sizeof(struct mpt3sas_facts));
3929         facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
3930         facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
3931         facts->VP_ID = mpi_reply.VP_ID;
3932         facts->VF_ID = mpi_reply.VF_ID;
3933         facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
3934         facts->MaxChainDepth = mpi_reply.MaxChainDepth;
3935         facts->WhoInit = mpi_reply.WhoInit;
3936         facts->NumberOfPorts = mpi_reply.NumberOfPorts;
3937         facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
3938         facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
3939         facts->MaxReplyDescriptorPostQueueDepth =
3940             le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
3941         facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
3942         facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
3943         if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
3944                 ioc->ir_firmware = 1;
3945         if ((facts->IOCCapabilities &
3946               MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
3947                 ioc->rdpq_array_capable = 1;
3948         facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
3949         facts->IOCRequestFrameSize =
3950             le16_to_cpu(mpi_reply.IOCRequestFrameSize);
3951         facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
3952         facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
3953         ioc->shost->max_id = -1;
3954         facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
3955         facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
3956         facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
3957         facts->HighPriorityCredit =
3958             le16_to_cpu(mpi_reply.HighPriorityCredit);
3959         facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
3960         facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
3961
3962         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3963                 "hba queue depth(%d), max chains per io(%d)\n",
3964                 ioc->name, facts->RequestCredit,
3965             facts->MaxChainDepth));
3966         dinitprintk(ioc, pr_info(MPT3SAS_FMT
3967                 "request frame size(%d), reply frame size(%d)\n", ioc->name,
3968             facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
3969         return 0;
3970 }
3971
3972 /**
3973  * _base_send_ioc_init - send ioc_init to firmware
3974  * @ioc: per adapter object
3975  * @sleep_flag: CAN_SLEEP or NO_SLEEP
3976  *
3977  * Returns 0 for success, non-zero for failure.
3978  */
3979 static int
3980 _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
3981 {
3982         Mpi2IOCInitRequest_t mpi_request;
3983         Mpi2IOCInitReply_t mpi_reply;
3984         int i, r = 0;
3985         struct timeval current_time;
3986         u16 ioc_status;
3987         u32 reply_post_free_array_sz = 0;
3988         Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
3989         dma_addr_t reply_post_free_array_dma;
3990
3991         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
3992             __func__));
3993
3994         memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
3995         mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
3996         mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
3997         mpi_request.VF_ID = 0; /* TODO */
3998         mpi_request.VP_ID = 0;
3999         mpi_request.MsgVersion = cpu_to_le16(MPI25_VERSION);
4000         mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
4001
4002         if (_base_is_controller_msix_enabled(ioc))
4003                 mpi_request.HostMSIxVectors = ioc->reply_queue_count;
4004         mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
4005         mpi_request.ReplyDescriptorPostQueueDepth =
4006             cpu_to_le16(ioc->reply_post_queue_depth);
4007         mpi_request.ReplyFreeQueueDepth =
4008             cpu_to_le16(ioc->reply_free_queue_depth);
4009
4010         mpi_request.SenseBufferAddressHigh =
4011             cpu_to_le32((u64)ioc->sense_dma >> 32);
4012         mpi_request.SystemReplyAddressHigh =
4013             cpu_to_le32((u64)ioc->reply_dma >> 32);
4014         mpi_request.SystemRequestFrameBaseAddress =
4015             cpu_to_le64((u64)ioc->request_dma);
4016         mpi_request.ReplyFreeQueueAddress =
4017             cpu_to_le64((u64)ioc->reply_free_dma);
4018
4019         if (ioc->rdpq_array_enable) {
4020                 reply_post_free_array_sz = ioc->reply_queue_count *
4021                     sizeof(Mpi2IOCInitRDPQArrayEntry);
4022                 reply_post_free_array = pci_alloc_consistent(ioc->pdev,
4023                         reply_post_free_array_sz, &reply_post_free_array_dma);
4024                 if (!reply_post_free_array) {
4025                         pr_err(MPT3SAS_FMT
4026                         "reply_post_free_array: pci_alloc_consistent failed\n",
4027                         ioc->name);
4028                         r = -ENOMEM;
4029                         goto out;
4030                 }
4031                 memset(reply_post_free_array, 0, reply_post_free_array_sz);
4032                 for (i = 0; i < ioc->reply_queue_count; i++)
4033                         reply_post_free_array[i].RDPQBaseAddress =
4034                             cpu_to_le64(
4035                                 (u64)ioc->reply_post[i].reply_post_free_dma);
4036                 mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
4037                 mpi_request.ReplyDescriptorPostQueueAddress =
4038                     cpu_to_le64((u64)reply_post_free_array_dma);
4039         } else {
4040                 mpi_request.ReplyDescriptorPostQueueAddress =
4041                     cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
4042         }
4043
4044         /* This time stamp specifies number of milliseconds
4045          * since epoch ~ midnight January 1, 1970.
4046          */
4047         do_gettimeofday(&current_time);
4048         mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
4049             (current_time.tv_usec / 1000));
4050
4051         if (ioc->logging_level & MPT_DEBUG_INIT) {
4052                 __le32 *mfp;
4053                 int i;
4054
4055                 mfp = (__le32 *)&mpi_request;
4056                 pr_info("\toffset:data\n");
4057                 for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
4058                         pr_info("\t[0x%02x]:%08x\n", i*4,
4059                             le32_to_cpu(mfp[i]));
4060         }
4061
4062         r = _base_handshake_req_reply_wait(ioc,
4063             sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
4064             sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
4065             sleep_flag);
4066
4067         if (r != 0) {
4068                 pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
4069                     ioc->name, __func__, r);
4070                 goto out;
4071         }
4072
4073         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
4074         if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
4075             mpi_reply.IOCLogInfo) {
4076                 pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__);
4077                 r = -EIO;
4078         }
4079
4080 out:
4081         if (reply_post_free_array)
4082                 pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
4083                                     reply_post_free_array,
4084                                     reply_post_free_array_dma);
4085         return r;
4086 }
4087
4088 /**
4089  * mpt3sas_port_enable_done - command completion routine for port enable
4090  * @ioc: per adapter object
4091  * @smid: system request message index
4092  * @msix_index: MSIX table index supplied by the OS
4093  * @reply: reply message frame(lower 32bit addr)
4094  *
4095  * Return 1 meaning mf should be freed from _base_interrupt
4096  *        0 means the mf is freed from this function.
4097  */
4098 u8
4099 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
4100         u32 reply)
4101 {
4102         MPI2DefaultReply_t *mpi_reply;
4103         u16 ioc_status;
4104
4105         if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED)
4106                 return 1;
4107
4108         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
4109         if (!mpi_reply)
4110                 return 1;
4111
4112         if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE)
4113                 return 1;
4114
4115         ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING;
4116         ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE;
4117         ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID;
4118         memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
4119         ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
4120         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
4121                 ioc->port_enable_failed = 1;
4122
4123         if (ioc->is_driver_loading) {
4124                 if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
4125                         mpt3sas_port_enable_complete(ioc);
4126                         return 1;
4127                 } else {
4128                         ioc->start_scan_failed = ioc_status;
4129                         ioc->start_scan = 0;
4130                         return 1;
4131                 }
4132         }
4133         complete(&ioc->port_enable_cmds.done);
4134         return 1;
4135 }
4136
4137 /**
4138  * _base_send_port_enable - send port_enable(discovery stuff) to firmware
4139  * @ioc: per adapter object
4140  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4141  *
4142  * Returns 0 for success, non-zero for failure.
4143  */
4144 static int
4145 _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4146 {
4147         Mpi2PortEnableRequest_t *mpi_request;
4148         Mpi2PortEnableReply_t *mpi_reply;
4149         unsigned long timeleft;
4150         int r = 0;
4151         u16 smid;
4152         u16 ioc_status;
4153
4154         pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
4155
4156         if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
4157                 pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
4158                     ioc->name, __func__);
4159                 return -EAGAIN;
4160         }
4161
4162         smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
4163         if (!smid) {
4164                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
4165                     ioc->name, __func__);
4166                 return -EAGAIN;
4167         }
4168
4169         ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
4170         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4171         ioc->port_enable_cmds.smid = smid;
4172         memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
4173         mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
4174
4175         init_completion(&ioc->port_enable_cmds.done);
4176         mpt3sas_base_put_smid_default(ioc, smid);
4177         timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
4178             300*HZ);
4179         if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
4180                 pr_err(MPT3SAS_FMT "%s: timeout\n",
4181                     ioc->name, __func__);
4182                 _debug_dump_mf(mpi_request,
4183                     sizeof(Mpi2PortEnableRequest_t)/4);
4184                 if (ioc->port_enable_cmds.status & MPT3_CMD_RESET)
4185                         r = -EFAULT;
4186                 else
4187                         r = -ETIME;
4188                 goto out;
4189         }
4190
4191         mpi_reply = ioc->port_enable_cmds.reply;
4192         ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
4193         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4194                 pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n",
4195                     ioc->name, __func__, ioc_status);
4196                 r = -EFAULT;
4197                 goto out;
4198         }
4199
4200  out:
4201         ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
4202         pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
4203             "SUCCESS" : "FAILED"));
4204         return r;
4205 }
4206
4207 /**
4208  * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply)
4209  * @ioc: per adapter object
4210  *
4211  * Returns 0 for success, non-zero for failure.
4212  */
4213 int
4214 mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
4215 {
4216         Mpi2PortEnableRequest_t *mpi_request;
4217         u16 smid;
4218
4219         pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
4220
4221         if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
4222                 pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
4223                     ioc->name, __func__);
4224                 return -EAGAIN;
4225         }
4226
4227         smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
4228         if (!smid) {
4229                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
4230                     ioc->name, __func__);
4231                 return -EAGAIN;
4232         }
4233
4234         ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
4235         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4236         ioc->port_enable_cmds.smid = smid;
4237         memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
4238         mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
4239
4240         mpt3sas_base_put_smid_default(ioc, smid);
4241         return 0;
4242 }
4243
4244 /**
4245  * _base_determine_wait_on_discovery - desposition
4246  * @ioc: per adapter object
4247  *
4248  * Decide whether to wait on discovery to complete. Used to either
4249  * locate boot device, or report volumes ahead of physical devices.
4250  *
4251  * Returns 1 for wait, 0 for don't wait
4252  */
4253 static int
4254 _base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc)
4255 {
4256         /* We wait for discovery to complete if IR firmware is loaded.
4257          * The sas topology events arrive before PD events, so we need time to
4258          * turn on the bit in ioc->pd_handles to indicate PD
4259          * Also, it maybe required to report Volumes ahead of physical
4260          * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
4261          */
4262         if (ioc->ir_firmware)
4263                 return 1;
4264
4265         /* if no Bios, then we don't need to wait */
4266         if (!ioc->bios_pg3.BiosVersion)
4267                 return 0;
4268
4269         /* Bios is present, then we drop down here.
4270          *
4271          * If there any entries in the Bios Page 2, then we wait
4272          * for discovery to complete.
4273          */
4274
4275         /* Current Boot Device */
4276         if ((ioc->bios_pg2.CurrentBootDeviceForm &
4277             MPI2_BIOSPAGE2_FORM_MASK) ==
4278             MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
4279         /* Request Boot Device */
4280            (ioc->bios_pg2.ReqBootDeviceForm &
4281             MPI2_BIOSPAGE2_FORM_MASK) ==
4282             MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
4283         /* Alternate Request Boot Device */
4284            (ioc->bios_pg2.ReqAltBootDeviceForm &
4285             MPI2_BIOSPAGE2_FORM_MASK) ==
4286             MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
4287                 return 0;
4288
4289         return 1;
4290 }
4291
4292 /**
4293  * _base_unmask_events - turn on notification for this event
4294  * @ioc: per adapter object
4295  * @event: firmware event
4296  *
4297  * The mask is stored in ioc->event_masks.
4298  */
4299 static void
4300 _base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
4301 {
4302         u32 desired_event;
4303
4304         if (event >= 128)
4305                 return;
4306
4307         desired_event = (1 << (event % 32));
4308
4309         if (event < 32)
4310                 ioc->event_masks[0] &= ~desired_event;
4311         else if (event < 64)
4312                 ioc->event_masks[1] &= ~desired_event;
4313         else if (event < 96)
4314                 ioc->event_masks[2] &= ~desired_event;
4315         else if (event < 128)
4316                 ioc->event_masks[3] &= ~desired_event;
4317 }
4318
4319 /**
4320  * _base_event_notification - send event notification
4321  * @ioc: per adapter object
4322  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4323  *
4324  * Returns 0 for success, non-zero for failure.
4325  */
4326 static int
4327 _base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4328 {
4329         Mpi2EventNotificationRequest_t *mpi_request;
4330         unsigned long timeleft;
4331         u16 smid;
4332         int r = 0;
4333         int i;
4334
4335         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4336             __func__));
4337
4338         if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
4339                 pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
4340                     ioc->name, __func__);
4341                 return -EAGAIN;
4342         }
4343
4344         smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
4345         if (!smid) {
4346                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
4347                     ioc->name, __func__);
4348                 return -EAGAIN;
4349         }
4350         ioc->base_cmds.status = MPT3_CMD_PENDING;
4351         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4352         ioc->base_cmds.smid = smid;
4353         memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
4354         mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
4355         mpi_request->VF_ID = 0; /* TODO */
4356         mpi_request->VP_ID = 0;
4357         for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
4358                 mpi_request->EventMasks[i] =
4359                     cpu_to_le32(ioc->event_masks[i]);
4360         init_completion(&ioc->base_cmds.done);
4361         mpt3sas_base_put_smid_default(ioc, smid);
4362         timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
4363         if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
4364                 pr_err(MPT3SAS_FMT "%s: timeout\n",
4365                     ioc->name, __func__);
4366                 _debug_dump_mf(mpi_request,
4367                     sizeof(Mpi2EventNotificationRequest_t)/4);
4368                 if (ioc->base_cmds.status & MPT3_CMD_RESET)
4369                         r = -EFAULT;
4370                 else
4371                         r = -ETIME;
4372         } else
4373                 dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n",
4374                     ioc->name, __func__));
4375         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
4376         return r;
4377 }
4378
4379 /**
4380  * mpt3sas_base_validate_event_type - validating event types
4381  * @ioc: per adapter object
4382  * @event: firmware event
4383  *
4384  * This will turn on firmware event notification when application
4385  * ask for that event. We don't mask events that are already enabled.
4386  */
4387 void
4388 mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
4389 {
4390         int i, j;
4391         u32 event_mask, desired_event;
4392         u8 send_update_to_fw;
4393
4394         for (i = 0, send_update_to_fw = 0; i <
4395             MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
4396                 event_mask = ~event_type[i];
4397                 desired_event = 1;
4398                 for (j = 0; j < 32; j++) {
4399                         if (!(event_mask & desired_event) &&
4400                             (ioc->event_masks[i] & desired_event)) {
4401                                 ioc->event_masks[i] &= ~desired_event;
4402                                 send_update_to_fw = 1;
4403                         }
4404                         desired_event = (desired_event << 1);
4405                 }
4406         }
4407
4408         if (!send_update_to_fw)
4409                 return;
4410
4411         mutex_lock(&ioc->base_cmds.mutex);
4412         _base_event_notification(ioc, CAN_SLEEP);
4413         mutex_unlock(&ioc->base_cmds.mutex);
4414 }
4415
4416 /**
4417  * _base_diag_reset - the "big hammer" start of day reset
4418  * @ioc: per adapter object
4419  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4420  *
4421  * Returns 0 for success, non-zero for failure.
4422  */
4423 static int
4424 _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4425 {
4426         u32 host_diagnostic;
4427         u32 ioc_state;
4428         u32 count;
4429         u32 hcb_size;
4430
4431         pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name);
4432
4433         drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n",
4434             ioc->name));
4435
4436         count = 0;
4437         do {
4438                 /* Write magic sequence to WriteSequence register
4439                  * Loop until in diagnostic mode
4440                  */
4441                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4442                         "write magic sequence\n", ioc->name));
4443                 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
4444                 writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
4445                 writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
4446                 writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
4447                 writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
4448                 writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
4449                 writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
4450
4451                 /* wait 100 msec */
4452                 if (sleep_flag == CAN_SLEEP)
4453                         msleep(100);
4454                 else
4455                         mdelay(100);
4456
4457                 if (count++ > 20)
4458                         goto out;
4459
4460                 host_diagnostic = readl(&ioc->chip->HostDiagnostic);
4461                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4462                         "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
4463                     ioc->name, count, host_diagnostic));
4464
4465         } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
4466
4467         hcb_size = readl(&ioc->chip->HCBSize);
4468
4469         drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n",
4470             ioc->name));
4471         writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
4472              &ioc->chip->HostDiagnostic);
4473
4474         /*This delay allows the chip PCIe hardware time to finish reset tasks*/
4475         if (sleep_flag == CAN_SLEEP)
4476                 msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
4477         else
4478                 mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
4479
4480         /* Approximately 300 second max wait */
4481         for (count = 0; count < (300000000 /
4482                 MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
4483
4484                 host_diagnostic = readl(&ioc->chip->HostDiagnostic);
4485
4486                 if (host_diagnostic == 0xFFFFFFFF)
4487                         goto out;
4488                 if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
4489                         break;
4490
4491                 /* Wait to pass the second read delay window */
4492                 if (sleep_flag == CAN_SLEEP)
4493                         msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
4494                                                                 / 1000);
4495                 else
4496                         mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
4497                                                                 / 1000);
4498         }
4499
4500         if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
4501
4502                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4503                 "restart the adapter assuming the HCB Address points to good F/W\n",
4504                     ioc->name));
4505                 host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
4506                 host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
4507                 writel(host_diagnostic, &ioc->chip->HostDiagnostic);
4508
4509                 drsprintk(ioc, pr_info(MPT3SAS_FMT
4510                     "re-enable the HCDW\n", ioc->name));
4511                 writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
4512                     &ioc->chip->HCBSize);
4513         }
4514
4515         drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n",
4516             ioc->name));
4517         writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
4518             &ioc->chip->HostDiagnostic);
4519
4520         drsprintk(ioc, pr_info(MPT3SAS_FMT
4521                 "disable writes to the diagnostic register\n", ioc->name));
4522         writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
4523
4524         drsprintk(ioc, pr_info(MPT3SAS_FMT
4525                 "Wait for FW to go to the READY state\n", ioc->name));
4526         ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
4527             sleep_flag);
4528         if (ioc_state) {
4529                 pr_err(MPT3SAS_FMT
4530                         "%s: failed going to ready state (ioc_state=0x%x)\n",
4531                         ioc->name, __func__, ioc_state);
4532                 goto out;
4533         }
4534
4535         pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name);
4536         return 0;
4537
4538  out:
4539         pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name);
4540         return -EFAULT;
4541 }
4542
4543 /**
4544  * _base_make_ioc_ready - put controller in READY state
4545  * @ioc: per adapter object
4546  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4547  * @type: FORCE_BIG_HAMMER or SOFT_RESET
4548  *
4549  * Returns 0 for success, non-zero for failure.
4550  */
4551 static int
4552 _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
4553         enum reset_type type)
4554 {
4555         u32 ioc_state;
4556         int rc;
4557         int count;
4558
4559         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4560             __func__));
4561
4562         if (ioc->pci_error_recovery)
4563                 return 0;
4564
4565         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
4566         dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
4567             ioc->name, __func__, ioc_state));
4568
4569         /* if in RESET state, it should move to READY state shortly */
4570         count = 0;
4571         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) {
4572                 while ((ioc_state & MPI2_IOC_STATE_MASK) !=
4573                     MPI2_IOC_STATE_READY) {
4574                         if (count++ == 10) {
4575                                 pr_err(MPT3SAS_FMT
4576                                         "%s: failed going to ready state (ioc_state=0x%x)\n",
4577                                     ioc->name, __func__, ioc_state);
4578                                 return -EFAULT;
4579                         }
4580                         if (sleep_flag == CAN_SLEEP)
4581                                 ssleep(1);
4582                         else
4583                                 mdelay(1000);
4584                         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
4585                 }
4586         }
4587
4588         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
4589                 return 0;
4590
4591         if (ioc_state & MPI2_DOORBELL_USED) {
4592                 dhsprintk(ioc, pr_info(MPT3SAS_FMT
4593                         "unexpected doorbell active!\n",
4594                         ioc->name));
4595                 goto issue_diag_reset;
4596         }
4597
4598         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
4599                 mpt3sas_base_fault_info(ioc, ioc_state &
4600                     MPI2_DOORBELL_DATA_MASK);
4601                 goto issue_diag_reset;
4602         }
4603
4604         if (type == FORCE_BIG_HAMMER)
4605                 goto issue_diag_reset;
4606
4607         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
4608                 if (!(_base_send_ioc_reset(ioc,
4609                     MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
4610                         return 0;
4611         }
4612
4613  issue_diag_reset:
4614         rc = _base_diag_reset(ioc, CAN_SLEEP);
4615         return rc;
4616 }
4617
4618 /**
4619  * _base_make_ioc_operational - put controller in OPERATIONAL state
4620  * @ioc: per adapter object
4621  * @sleep_flag: CAN_SLEEP or NO_SLEEP
4622  *
4623  * Returns 0 for success, non-zero for failure.
4624  */
4625 static int
4626 _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
4627 {
4628         int r, i;
4629         unsigned long   flags;
4630         u32 reply_address;
4631         u16 smid;
4632         struct _tr_list *delayed_tr, *delayed_tr_next;
4633         struct adapter_reply_queue *reply_q;
4634         long reply_post_free;
4635         u32 reply_post_free_sz, index = 0;
4636
4637         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4638             __func__));
4639
4640         /* clean the delayed target reset list */
4641         list_for_each_entry_safe(delayed_tr, delayed_tr_next,
4642             &ioc->delayed_tr_list, list) {
4643                 list_del(&delayed_tr->list);
4644                 kfree(delayed_tr);
4645         }
4646
4647
4648         list_for_each_entry_safe(delayed_tr, delayed_tr_next,
4649             &ioc->delayed_tr_volume_list, list) {
4650                 list_del(&delayed_tr->list);
4651                 kfree(delayed_tr);
4652         }
4653
4654         /* initialize the scsi lookup free list */
4655         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
4656         INIT_LIST_HEAD(&ioc->free_list);
4657         smid = 1;
4658         for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
4659                 INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
4660                 ioc->scsi_lookup[i].cb_idx = 0xFF;
4661                 ioc->scsi_lookup[i].smid = smid;
4662                 ioc->scsi_lookup[i].scmd = NULL;
4663                 list_add_tail(&ioc->scsi_lookup[i].tracker_list,
4664                     &ioc->free_list);
4665         }
4666
4667         /* hi-priority queue */
4668         INIT_LIST_HEAD(&ioc->hpr_free_list);
4669         smid = ioc->hi_priority_smid;
4670         for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
4671                 ioc->hpr_lookup[i].cb_idx = 0xFF;
4672                 ioc->hpr_lookup[i].smid = smid;
4673                 list_add_tail(&ioc->hpr_lookup[i].tracker_list,
4674                     &ioc->hpr_free_list);
4675         }
4676
4677         /* internal queue */
4678         INIT_LIST_HEAD(&ioc->internal_free_list);
4679         smid = ioc->internal_smid;
4680         for (i = 0; i < ioc->internal_depth; i++, smid++) {
4681                 ioc->internal_lookup[i].cb_idx = 0xFF;
4682                 ioc->internal_lookup[i].smid = smid;
4683                 list_add_tail(&ioc->internal_lookup[i].tracker_list,
4684                     &ioc->internal_free_list);
4685         }
4686
4687         /* chain pool */
4688         INIT_LIST_HEAD(&ioc->free_chain_list);
4689         for (i = 0; i < ioc->chain_depth; i++)
4690                 list_add_tail(&ioc->chain_lookup[i].tracker_list,
4691                     &ioc->free_chain_list);
4692
4693         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
4694
4695         /* initialize Reply Free Queue */
4696         for (i = 0, reply_address = (u32)ioc->reply_dma ;
4697             i < ioc->reply_free_queue_depth ; i++, reply_address +=
4698             ioc->reply_sz)
4699                 ioc->reply_free[i] = cpu_to_le32(reply_address);
4700
4701         /* initialize reply queues */
4702         if (ioc->is_driver_loading)
4703                 _base_assign_reply_queues(ioc);
4704
4705         /* initialize Reply Post Free Queue */
4706         reply_post_free_sz = ioc->reply_post_queue_depth *
4707             sizeof(Mpi2DefaultReplyDescriptor_t);
4708         reply_post_free = (long)ioc->reply_post[index].reply_post_free;
4709         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
4710                 reply_q->reply_post_host_index = 0;
4711                 reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
4712                     reply_post_free;
4713                 for (i = 0; i < ioc->reply_post_queue_depth; i++)
4714                         reply_q->reply_post_free[i].Words =
4715                             cpu_to_le64(ULLONG_MAX);
4716                 if (!_base_is_controller_msix_enabled(ioc))
4717                         goto skip_init_reply_post_free_queue;
4718                 /*
4719                  * If RDPQ is enabled, switch to the next allocation.
4720                  * Otherwise advance within the contiguous region.
4721                  */
4722                 if (ioc->rdpq_array_enable)
4723                         reply_post_free = (long)
4724                             ioc->reply_post[++index].reply_post_free;
4725                 else
4726                         reply_post_free += reply_post_free_sz;
4727         }
4728  skip_init_reply_post_free_queue:
4729
4730         r = _base_send_ioc_init(ioc, sleep_flag);
4731         if (r)
4732                 return r;
4733
4734         /* initialize reply free host index */
4735         ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
4736         writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
4737
4738         /* initialize reply post host index */
4739         list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
4740                 if (ioc->msix96_vector)
4741                         writel((reply_q->msix_index & 7)<<
4742                            MPI2_RPHI_MSIX_INDEX_SHIFT,
4743                            ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
4744                 else
4745                         writel(reply_q->msix_index <<
4746                                 MPI2_RPHI_MSIX_INDEX_SHIFT,
4747                                 &ioc->chip->ReplyPostHostIndex);
4748
4749                 if (!_base_is_controller_msix_enabled(ioc))
4750                         goto skip_init_reply_post_host_index;
4751         }
4752
4753  skip_init_reply_post_host_index:
4754
4755         _base_unmask_interrupts(ioc);
4756         r = _base_event_notification(ioc, sleep_flag);
4757         if (r)
4758                 return r;
4759
4760         if (sleep_flag == CAN_SLEEP)
4761                 _base_static_config_pages(ioc);
4762
4763
4764         if (ioc->is_driver_loading) {
4765                 ioc->wait_for_discovery_to_complete =
4766                     _base_determine_wait_on_discovery(ioc);
4767
4768                 return r; /* scan_start and scan_finished support */
4769         }
4770
4771         r = _base_send_port_enable(ioc, sleep_flag);
4772         if (r)
4773                 return r;
4774
4775         return r;
4776 }
4777
4778 /**
4779  * mpt3sas_base_free_resources - free resources controller resources
4780  * @ioc: per adapter object
4781  *
4782  * Return nothing.
4783  */
4784 void
4785 mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
4786 {
4787         dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4788             __func__));
4789
4790         if (ioc->chip_phys && ioc->chip) {
4791                 _base_mask_interrupts(ioc);
4792                 ioc->shost_recovery = 1;
4793                 _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
4794                 ioc->shost_recovery = 0;
4795         }
4796
4797         mpt3sas_base_unmap_resources(ioc);
4798         return;
4799 }
4800
4801 /**
4802  * mpt3sas_base_attach - attach controller instance
4803  * @ioc: per adapter object
4804  *
4805  * Returns 0 for success, non-zero for failure.
4806  */
4807 int
4808 mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
4809 {
4810         int r, i;
4811         int cpu_id, last_cpu_id = 0;
4812         u8 revision;
4813
4814         dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
4815             __func__));
4816
4817         /* setup cpu_msix_table */
4818         ioc->cpu_count = num_online_cpus();
4819         for_each_online_cpu(cpu_id)
4820                 last_cpu_id = cpu_id;
4821         ioc->cpu_msix_table_sz = last_cpu_id + 1;
4822         ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
4823         ioc->reply_queue_count = 1;
4824         if (!ioc->cpu_msix_table) {
4825                 dfailprintk(ioc, pr_info(MPT3SAS_FMT
4826                         "allocation for cpu_msix_table failed!!!\n",
4827                         ioc->name));
4828                 r = -ENOMEM;
4829                 goto out_free_resources;
4830         }
4831
4832         /* Check whether the controller revision is C0 or above.
4833          * only C0 and above revision controllers support 96 MSI-X vectors.
4834          */
4835         revision = ioc->pdev->revision;
4836
4837         if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
4838              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
4839              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
4840              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
4841              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
4842              ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
4843              (revision >= 0x02))
4844                 ioc->msix96_vector = 1;
4845
4846         ioc->rdpq_array_enable_assigned = 0;
4847         ioc->dma_mask = 0;
4848         r = mpt3sas_base_map_resources(ioc);
4849         if (r)
4850                 goto out_free_resources;
4851
4852
4853         pci_set_drvdata(ioc->pdev, ioc->shost);
4854         r = _base_get_ioc_facts(ioc, CAN_SLEEP);
4855         if (r)
4856                 goto out_free_resources;
4857
4858         /*
4859          * In SAS3.0,
4860          * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
4861          * Target Status - all require the IEEE formated scatter gather
4862          * elements.
4863          */
4864
4865         ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
4866         ioc->build_sg = &_base_build_sg_ieee;
4867         ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
4868         ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
4869
4870         /*
4871          * These function pointers for other requests that don't
4872          * the require IEEE scatter gather elements.
4873          *
4874          * For example Configuration Pages and SAS IOUNIT Control don't.
4875          */
4876         ioc->build_sg_mpi = &_base_build_sg;
4877         ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
4878
4879         r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
4880         if (r)
4881                 goto out_free_resources;
4882
4883         ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
4884             sizeof(struct mpt3sas_port_facts), GFP_KERNEL);
4885         if (!ioc->pfacts) {
4886                 r = -ENOMEM;
4887                 goto out_free_resources;
4888         }
4889
4890         for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
4891                 r = _base_get_port_facts(ioc, i, CAN_SLEEP);
4892                 if (r)
4893                         goto out_free_resources;
4894         }
4895
4896         r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
4897         if (r)
4898                 goto out_free_resources;
4899
4900         init_waitqueue_head(&ioc->reset_wq);
4901
4902         /* allocate memory pd handle bitmask list */
4903         ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
4904         if (ioc->facts.MaxDevHandle % 8)
4905                 ioc->pd_handles_sz++;
4906         ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
4907             GFP_KERNEL);
4908         if (!ioc->pd_handles) {
4909                 r = -ENOMEM;
4910                 goto out_free_resources;
4911         }
4912         ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
4913             GFP_KERNEL);
4914         if (!ioc->blocking_handles) {
4915                 r = -ENOMEM;
4916                 goto out_free_resources;
4917         }
4918
4919         ioc->fwfault_debug = mpt3sas_fwfault_debug;
4920
4921         /* base internal command bits */
4922         mutex_init(&ioc->base_cmds.mutex);
4923         ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4924         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
4925
4926         /* port_enable command bits */
4927         ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4928         ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
4929
4930         /* transport internal command bits */
4931         ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4932         ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
4933         mutex_init(&ioc->transport_cmds.mutex);
4934
4935         /* scsih internal command bits */
4936         ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4937         ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
4938         mutex_init(&ioc->scsih_cmds.mutex);
4939
4940         /* task management internal command bits */
4941         ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4942         ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
4943         mutex_init(&ioc->tm_cmds.mutex);
4944
4945         /* config page internal command bits */
4946         ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4947         ioc->config_cmds.status = MPT3_CMD_NOT_USED;
4948         mutex_init(&ioc->config_cmds.mutex);
4949
4950         /* ctl module internal command bits */
4951         ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
4952         ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
4953         ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
4954         mutex_init(&ioc->ctl_cmds.mutex);
4955
4956         if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
4957             !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
4958             !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
4959             !ioc->ctl_cmds.sense) {
4960                 r = -ENOMEM;
4961                 goto out_free_resources;
4962         }
4963
4964         for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
4965                 ioc->event_masks[i] = -1;
4966
4967         /* here we enable the events we care about */
4968         _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
4969         _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
4970         _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
4971         _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
4972         _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
4973         _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
4974         _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
4975         _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
4976         _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
4977         _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
4978         _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
4979
4980         r = _base_make_ioc_operational(ioc, CAN_SLEEP);
4981         if (r)
4982                 goto out_free_resources;
4983
4984         return 0;
4985
4986  out_free_resources:
4987
4988         ioc->remove_host = 1;
4989
4990         mpt3sas_base_free_resources(ioc);
4991         _base_release_memory_pools(ioc);
4992         pci_set_drvdata(ioc->pdev, NULL);
4993         kfree(ioc->cpu_msix_table);
4994         kfree(ioc->pd_handles);
4995         kfree(ioc->blocking_handles);
4996         kfree(ioc->tm_cmds.reply);
4997         kfree(ioc->transport_cmds.reply);
4998         kfree(ioc->scsih_cmds.reply);
4999         kfree(ioc->config_cmds.reply);
5000         kfree(ioc->base_cmds.reply);
5001         kfree(ioc->port_enable_cmds.reply);
5002         kfree(ioc->ctl_cmds.reply);
5003         kfree(ioc->ctl_cmds.sense);
5004         kfree(ioc->pfacts);
5005         ioc->ctl_cmds.reply = NULL;
5006         ioc->base_cmds.reply = NULL;
5007         ioc->tm_cmds.reply = NULL;
5008         ioc->scsih_cmds.reply = NULL;
5009         ioc->transport_cmds.reply = NULL;
5010         ioc->config_cmds.reply = NULL;
5011         ioc->pfacts = NULL;
5012         return r;
5013 }
5014
5015
5016 /**
5017  * mpt3sas_base_detach - remove controller instance
5018  * @ioc: per adapter object
5019  *
5020  * Return nothing.
5021  */
5022 void
5023 mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
5024 {
5025         dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
5026             __func__));
5027
5028         mpt3sas_base_stop_watchdog(ioc);
5029         mpt3sas_base_free_resources(ioc);
5030         _base_release_memory_pools(ioc);
5031         pci_set_drvdata(ioc->pdev, NULL);
5032         kfree(ioc->cpu_msix_table);
5033         kfree(ioc->pd_handles);
5034         kfree(ioc->blocking_handles);
5035         kfree(ioc->pfacts);
5036         kfree(ioc->ctl_cmds.reply);
5037         kfree(ioc->ctl_cmds.sense);
5038         kfree(ioc->base_cmds.reply);
5039         kfree(ioc->port_enable_cmds.reply);
5040         kfree(ioc->tm_cmds.reply);
5041         kfree(ioc->transport_cmds.reply);
5042         kfree(ioc->scsih_cmds.reply);
5043         kfree(ioc->config_cmds.reply);
5044 }
5045
5046 /**
5047  * _base_reset_handler - reset callback handler (for base)
5048  * @ioc: per adapter object
5049  * @reset_phase: phase
5050  *
5051  * The handler for doing any required cleanup or initialization.
5052  *
5053  * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
5054  * MPT3_IOC_DONE_RESET
5055  *
5056  * Return nothing.
5057  */
5058 static void
5059 _base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
5060 {
5061         mpt3sas_scsih_reset_handler(ioc, reset_phase);
5062         mpt3sas_ctl_reset_handler(ioc, reset_phase);
5063         switch (reset_phase) {
5064         case MPT3_IOC_PRE_RESET:
5065                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
5066                 "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
5067                 break;
5068         case MPT3_IOC_AFTER_RESET:
5069                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
5070                 "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
5071                 if (ioc->transport_cmds.status & MPT3_CMD_PENDING) {
5072                         ioc->transport_cmds.status |= MPT3_CMD_RESET;
5073                         mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid);
5074                         complete(&ioc->transport_cmds.done);
5075                 }
5076                 if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
5077                         ioc->base_cmds.status |= MPT3_CMD_RESET;
5078                         mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid);
5079                         complete(&ioc->base_cmds.done);
5080                 }
5081                 if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
5082                         ioc->port_enable_failed = 1;
5083                         ioc->port_enable_cmds.status |= MPT3_CMD_RESET;
5084                         mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
5085                         if (ioc->is_driver_loading) {
5086                                 ioc->start_scan_failed =
5087                                     MPI2_IOCSTATUS_INTERNAL_ERROR;
5088                                 ioc->start_scan = 0;
5089                                 ioc->port_enable_cmds.status =
5090                                     MPT3_CMD_NOT_USED;
5091                         } else
5092                                 complete(&ioc->port_enable_cmds.done);
5093                 }
5094                 if (ioc->config_cmds.status & MPT3_CMD_PENDING) {
5095                         ioc->config_cmds.status |= MPT3_CMD_RESET;
5096                         mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid);
5097                         ioc->config_cmds.smid = USHRT_MAX;
5098                         complete(&ioc->config_cmds.done);
5099                 }
5100                 break;
5101         case MPT3_IOC_DONE_RESET:
5102                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
5103                         "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
5104                 break;
5105         }
5106 }
5107
5108 /**
5109  * _wait_for_commands_to_complete - reset controller
5110  * @ioc: Pointer to MPT_ADAPTER structure
5111  * @sleep_flag: CAN_SLEEP or NO_SLEEP
5112  *
5113  * This function waiting(3s) for all pending commands to complete
5114  * prior to putting controller in reset.
5115  */
5116 static void
5117 _wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
5118 {
5119         u32 ioc_state;
5120         unsigned long flags;
5121         u16 i;
5122
5123         ioc->pending_io_count = 0;
5124         if (sleep_flag != CAN_SLEEP)
5125                 return;
5126
5127         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
5128         if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
5129                 return;
5130
5131         /* pending command count */
5132         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5133         for (i = 0; i < ioc->scsiio_depth; i++)
5134                 if (ioc->scsi_lookup[i].cb_idx != 0xFF)
5135                         ioc->pending_io_count++;
5136         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
5137
5138         if (!ioc->pending_io_count)
5139                 return;
5140
5141         /* wait for pending commands to complete */
5142         wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
5143 }
5144
5145 /**
5146  * mpt3sas_base_hard_reset_handler - reset controller
5147  * @ioc: Pointer to MPT_ADAPTER structure
5148  * @sleep_flag: CAN_SLEEP or NO_SLEEP
5149  * @type: FORCE_BIG_HAMMER or SOFT_RESET
5150  *
5151  * Returns 0 for success, non-zero for failure.
5152  */
5153 int
5154 mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
5155         enum reset_type type)
5156 {
5157         int r;
5158         unsigned long flags;
5159         u32 ioc_state;
5160         u8 is_fault = 0, is_trigger = 0;
5161
5162         dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
5163             __func__));
5164
5165         if (ioc->pci_error_recovery) {
5166                 pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n",
5167                     ioc->name, __func__);
5168                 r = 0;
5169                 goto out_unlocked;
5170         }
5171
5172         if (mpt3sas_fwfault_debug)
5173                 mpt3sas_halt_firmware(ioc);
5174
5175         /* TODO - What we really should be doing is pulling
5176          * out all the code associated with NO_SLEEP; its never used.
5177          * That is legacy code from mpt fusion driver, ported over.
5178          * I will leave this BUG_ON here for now till its been resolved.
5179          */
5180         BUG_ON(sleep_flag == NO_SLEEP);
5181
5182         /* wait for an active reset in progress to complete */
5183         if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
5184                 do {
5185                         ssleep(1);
5186                 } while (ioc->shost_recovery == 1);
5187                 dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
5188                     __func__));
5189                 return ioc->ioc_reset_in_progress_status;
5190         }
5191
5192         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
5193         ioc->shost_recovery = 1;
5194         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
5195
5196         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
5197             MPT3_DIAG_BUFFER_IS_REGISTERED) &&
5198             (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
5199             MPT3_DIAG_BUFFER_IS_RELEASED))) {
5200                 is_trigger = 1;
5201                 ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
5202                 if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
5203                         is_fault = 1;
5204         }
5205         _base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
5206         _wait_for_commands_to_complete(ioc, sleep_flag);
5207         _base_mask_interrupts(ioc);
5208         r = _base_make_ioc_ready(ioc, sleep_flag, type);
5209         if (r)
5210                 goto out;
5211         _base_reset_handler(ioc, MPT3_IOC_AFTER_RESET);
5212
5213         /* If this hard reset is called while port enable is active, then
5214          * there is no reason to call make_ioc_operational
5215          */
5216         if (ioc->is_driver_loading && ioc->port_enable_failed) {
5217                 ioc->remove_host = 1;
5218                 r = -EFAULT;
5219                 goto out;
5220         }
5221         r = _base_get_ioc_facts(ioc, CAN_SLEEP);
5222         if (r)
5223                 goto out;
5224
5225         if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
5226                 panic("%s: Issue occurred with flashing controller firmware."
5227                       "Please reboot the system and ensure that the correct"
5228                       " firmware version is running\n", ioc->name);
5229
5230         r = _base_make_ioc_operational(ioc, sleep_flag);
5231         if (!r)
5232                 _base_reset_handler(ioc, MPT3_IOC_DONE_RESET);
5233
5234  out:
5235         dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n",
5236             ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
5237
5238         spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
5239         ioc->ioc_reset_in_progress_status = r;
5240         ioc->shost_recovery = 0;
5241         spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
5242         ioc->ioc_reset_count++;
5243         mutex_unlock(&ioc->reset_in_progress_mutex);
5244
5245  out_unlocked:
5246         if ((r == 0) && is_trigger) {
5247                 if (is_fault)
5248                         mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT);
5249                 else
5250                         mpt3sas_trigger_master(ioc,
5251                             MASTER_TRIGGER_ADAPTER_RESET);
5252         }
5253         dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
5254             __func__));
5255         return r;
5256 }