]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - include/linux/ftrace.h
20da0561b868cb951bea42f240d5b4ea1e3f3937
[karo-tx-linux.git] / include / linux / ftrace.h
1 /*
2  * Ftrace header.  For implementation details beyond the random comments
3  * scattered below, see: Documentation/trace/ftrace-design.txt
4  */
5
6 #ifndef _LINUX_FTRACE_H
7 #define _LINUX_FTRACE_H
8
9 #include <linux/trace_clock.h>
10 #include <linux/kallsyms.h>
11 #include <linux/linkage.h>
12 #include <linux/bitops.h>
13 #include <linux/ptrace.h>
14 #include <linux/ktime.h>
15 #include <linux/sched.h>
16 #include <linux/types.h>
17 #include <linux/init.h>
18 #include <linux/fs.h>
19
20 #include <asm/ftrace.h>
21
22 /*
23  * If the arch supports passing the variable contents of
24  * function_trace_op as the third parameter back from the
25  * mcount call, then the arch should define this as 1.
26  */
27 #ifndef ARCH_SUPPORTS_FTRACE_OPS
28 #define ARCH_SUPPORTS_FTRACE_OPS 0
29 #endif
30
31 /*
32  * If the arch's mcount caller does not support all of ftrace's
33  * features, then it must call an indirect function that
34  * does. Or at least does enough to prevent any unwelcomed side effects.
35  */
36 #if !defined(CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST) || \
37         !ARCH_SUPPORTS_FTRACE_OPS
38 # define FTRACE_FORCE_LIST_FUNC 1
39 #else
40 # define FTRACE_FORCE_LIST_FUNC 0
41 #endif
42
43
44 struct module;
45 struct ftrace_hash;
46
47 #ifdef CONFIG_FUNCTION_TRACER
48
49 extern int ftrace_enabled;
50 extern int
51 ftrace_enable_sysctl(struct ctl_table *table, int write,
52                      void __user *buffer, size_t *lenp,
53                      loff_t *ppos);
54
55 struct ftrace_ops;
56
57 typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
58                               struct ftrace_ops *op, struct pt_regs *regs);
59
60 /*
61  * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
62  * set in the flags member.
63  *
64  * ENABLED - set/unset when ftrace_ops is registered/unregistered
65  * GLOBAL  - set manualy by ftrace_ops user to denote the ftrace_ops
66  *           is part of the global tracers sharing the same filter
67  *           via set_ftrace_* debugfs files.
68  * DYNAMIC - set when ftrace_ops is registered to denote dynamically
69  *           allocated ftrace_ops which need special care
70  * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
71  *           could be controled by following calls:
72  *             ftrace_function_local_enable
73  *             ftrace_function_local_disable
74  * SAVE_REGS - The ftrace_ops wants regs saved at each function called
75  *            and passed to the callback. If this flag is set, but the
76  *            architecture does not support passing regs
77  *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
78  *            ftrace_ops will fail to register, unless the next flag
79  *            is set.
80  * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
81  *            handler can handle an arch that does not save regs
82  *            (the handler tests if regs == NULL), then it can set
83  *            this flag instead. It will not fail registering the ftrace_ops
84  *            but, the regs field will be NULL if the arch does not support
85  *            passing regs to the handler.
86  *            Note, if this flag is set, the SAVE_REGS flag will automatically
87  *            get set upon registering the ftrace_ops, if the arch supports it.
88  * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure
89  *            that the call back has its own recursion protection. If it does
90  *            not set this, then the ftrace infrastructure will add recursion
91  *            protection for the caller.
92  * STUB   - The ftrace_ops is just a place holder.
93  * INITIALIZED - The ftrace_ops has already been initialized (first use time
94  *            register_ftrace_function() is called, it will initialized the ops)
95  * DELETED - The ops are being deleted, do not let them be registered again.
96  */
97 enum {
98         FTRACE_OPS_FL_ENABLED                   = 1 << 0,
99         FTRACE_OPS_FL_GLOBAL                    = 1 << 1,
100         FTRACE_OPS_FL_DYNAMIC                   = 1 << 2,
101         FTRACE_OPS_FL_CONTROL                   = 1 << 3,
102         FTRACE_OPS_FL_SAVE_REGS                 = 1 << 4,
103         FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED    = 1 << 5,
104         FTRACE_OPS_FL_RECURSION_SAFE            = 1 << 6,
105         FTRACE_OPS_FL_STUB                      = 1 << 7,
106         FTRACE_OPS_FL_INITIALIZED               = 1 << 8,
107         FTRACE_OPS_FL_DELETED                   = 1 << 9,
108 };
109
110 /*
111  * Note, ftrace_ops can be referenced outside of RCU protection.
112  * (Although, for perf, the control ops prevent that). If ftrace_ops is
113  * allocated and not part of kernel core data, the unregistering of it will
114  * perform a scheduling on all CPUs to make sure that there are no more users.
115  * Depending on the load of the system that may take a bit of time.
116  *
117  * Any private data added must also take care not to be freed and if private
118  * data is added to a ftrace_ops that is in core code, the user of the
119  * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
120  */
121 struct ftrace_ops {
122         ftrace_func_t                   func;
123         struct ftrace_ops               *next;
124         unsigned long                   flags;
125         int __percpu                    *disabled;
126         void                            *private;
127 #ifdef CONFIG_DYNAMIC_FTRACE
128         struct ftrace_hash              *notrace_hash;
129         struct ftrace_hash              *filter_hash;
130         struct mutex                    regex_lock;
131 #endif
132 };
133
134 extern int function_trace_stop;
135
136 /*
137  * Type of the current tracing.
138  */
139 enum ftrace_tracing_type_t {
140         FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
141         FTRACE_TYPE_RETURN,     /* Hook the return of the function */
142 };
143
144 /* Current tracing type, default is FTRACE_TYPE_ENTER */
145 extern enum ftrace_tracing_type_t ftrace_tracing_type;
146
147 /**
148  * ftrace_stop - stop function tracer.
149  *
150  * A quick way to stop the function tracer. Note this an on off switch,
151  * it is not something that is recursive like preempt_disable.
152  * This does not disable the calling of mcount, it only stops the
153  * calling of functions from mcount.
154  */
155 static inline void ftrace_stop(void)
156 {
157         function_trace_stop = 1;
158 }
159
160 /**
161  * ftrace_start - start the function tracer.
162  *
163  * This function is the inverse of ftrace_stop. This does not enable
164  * the function tracing if the function tracer is disabled. This only
165  * sets the function tracer flag to continue calling the functions
166  * from mcount.
167  */
168 static inline void ftrace_start(void)
169 {
170         function_trace_stop = 0;
171 }
172
173 /*
174  * The ftrace_ops must be a static and should also
175  * be read_mostly.  These functions do modify read_mostly variables
176  * so use them sparely. Never free an ftrace_op or modify the
177  * next pointer after it has been registered. Even after unregistering
178  * it, the next pointer may still be used internally.
179  */
180 int register_ftrace_function(struct ftrace_ops *ops);
181 int unregister_ftrace_function(struct ftrace_ops *ops);
182 void clear_ftrace_function(void);
183
184 /**
185  * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
186  *
187  * This function enables tracing on current cpu by decreasing
188  * the per cpu control variable.
189  * It must be called with preemption disabled and only on ftrace_ops
190  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
191  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
192  */
193 static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
194 {
195         if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
196                 return;
197
198         (*this_cpu_ptr(ops->disabled))--;
199 }
200
201 /**
202  * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
203  *
204  * This function enables tracing on current cpu by decreasing
205  * the per cpu control variable.
206  * It must be called with preemption disabled and only on ftrace_ops
207  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
208  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
209  */
210 static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
211 {
212         if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
213                 return;
214
215         (*this_cpu_ptr(ops->disabled))++;
216 }
217
218 /**
219  * ftrace_function_local_disabled - returns ftrace_ops disabled value
220  *                                  on current cpu
221  *
222  * This function returns value of ftrace_ops::disabled on current cpu.
223  * It must be called with preemption disabled and only on ftrace_ops
224  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
225  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
226  */
227 static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
228 {
229         WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
230         return *this_cpu_ptr(ops->disabled);
231 }
232
233 extern void ftrace_stub(unsigned long a0, unsigned long a1,
234                         struct ftrace_ops *op, struct pt_regs *regs);
235
236 #else /* !CONFIG_FUNCTION_TRACER */
237 /*
238  * (un)register_ftrace_function must be a macro since the ops parameter
239  * must not be evaluated.
240  */
241 #define register_ftrace_function(ops) ({ 0; })
242 #define unregister_ftrace_function(ops) ({ 0; })
243 static inline int ftrace_nr_registered_ops(void)
244 {
245         return 0;
246 }
247 static inline void clear_ftrace_function(void) { }
248 static inline void ftrace_kill(void) { }
249 static inline void ftrace_stop(void) { }
250 static inline void ftrace_start(void) { }
251 #endif /* CONFIG_FUNCTION_TRACER */
252
253 #ifdef CONFIG_STACK_TRACER
254 extern int stack_tracer_enabled;
255 int
256 stack_trace_sysctl(struct ctl_table *table, int write,
257                    void __user *buffer, size_t *lenp,
258                    loff_t *ppos);
259 #endif
260
261 struct ftrace_func_command {
262         struct list_head        list;
263         char                    *name;
264         int                     (*func)(struct ftrace_hash *hash,
265                                         char *func, char *cmd,
266                                         char *params, int enable);
267 };
268
269 #ifdef CONFIG_DYNAMIC_FTRACE
270
271 int ftrace_arch_code_modify_prepare(void);
272 int ftrace_arch_code_modify_post_process(void);
273
274 void ftrace_bug(int err, unsigned long ip);
275
276 struct seq_file;
277
278 struct ftrace_probe_ops {
279         void                    (*func)(unsigned long ip,
280                                         unsigned long parent_ip,
281                                         void **data);
282         int                     (*init)(struct ftrace_probe_ops *ops,
283                                         unsigned long ip, void **data);
284         void                    (*free)(struct ftrace_probe_ops *ops,
285                                         unsigned long ip, void **data);
286         int                     (*print)(struct seq_file *m,
287                                          unsigned long ip,
288                                          struct ftrace_probe_ops *ops,
289                                          void *data);
290 };
291
292 extern int
293 register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
294                               void *data);
295 extern void
296 unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
297                                 void *data);
298 extern void
299 unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
300 extern void unregister_ftrace_function_probe_all(char *glob);
301
302 extern int ftrace_text_reserved(void *start, void *end);
303
304 extern int ftrace_nr_registered_ops(void);
305
306 /*
307  * The dyn_ftrace record's flags field is split into two parts.
308  * the first part which is '0-FTRACE_REF_MAX' is a counter of
309  * the number of callbacks that have registered the function that
310  * the dyn_ftrace descriptor represents.
311  *
312  * The second part is a mask:
313  *  ENABLED - the function is being traced
314  *  REGS    - the record wants the function to save regs
315  *  REGS_EN - the function is set up to save regs.
316  *
317  * When a new ftrace_ops is registered and wants a function to save
318  * pt_regs, the rec->flag REGS is set. When the function has been
319  * set up to save regs, the REG_EN flag is set. Once a function
320  * starts saving regs it will do so until all ftrace_ops are removed
321  * from tracing that function.
322  */
323 enum {
324         FTRACE_FL_ENABLED       = (1UL << 29),
325         FTRACE_FL_REGS          = (1UL << 30),
326         FTRACE_FL_REGS_EN       = (1UL << 31)
327 };
328
329 #define FTRACE_FL_MASK          (0x7UL << 29)
330 #define FTRACE_REF_MAX          ((1UL << 29) - 1)
331
332 struct dyn_ftrace {
333         unsigned long           ip; /* address of mcount call-site */
334         unsigned long           flags;
335         struct dyn_arch_ftrace  arch;
336 };
337
338 int ftrace_force_update(void);
339 int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
340                          int remove, int reset);
341 int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
342                        int len, int reset);
343 int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
344                         int len, int reset);
345 void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
346 void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
347 void ftrace_free_filter(struct ftrace_ops *ops);
348
349 int register_ftrace_command(struct ftrace_func_command *cmd);
350 int unregister_ftrace_command(struct ftrace_func_command *cmd);
351
352 enum {
353         FTRACE_UPDATE_CALLS             = (1 << 0),
354         FTRACE_DISABLE_CALLS            = (1 << 1),
355         FTRACE_UPDATE_TRACE_FUNC        = (1 << 2),
356         FTRACE_START_FUNC_RET           = (1 << 3),
357         FTRACE_STOP_FUNC_RET            = (1 << 4),
358 };
359
360 /*
361  * The FTRACE_UPDATE_* enum is used to pass information back
362  * from the ftrace_update_record() and ftrace_test_record()
363  * functions. These are called by the code update routines
364  * to find out what is to be done for a given function.
365  *
366  *  IGNORE           - The function is already what we want it to be
367  *  MAKE_CALL        - Start tracing the function
368  *  MODIFY_CALL      - Stop saving regs for the function
369  *  MODIFY_CALL_REGS - Start saving regs for the function
370  *  MAKE_NOP         - Stop tracing the function
371  */
372 enum {
373         FTRACE_UPDATE_IGNORE,
374         FTRACE_UPDATE_MAKE_CALL,
375         FTRACE_UPDATE_MODIFY_CALL,
376         FTRACE_UPDATE_MODIFY_CALL_REGS,
377         FTRACE_UPDATE_MAKE_NOP,
378 };
379
380 enum {
381         FTRACE_ITER_FILTER      = (1 << 0),
382         FTRACE_ITER_NOTRACE     = (1 << 1),
383         FTRACE_ITER_PRINTALL    = (1 << 2),
384         FTRACE_ITER_DO_HASH     = (1 << 3),
385         FTRACE_ITER_HASH        = (1 << 4),
386         FTRACE_ITER_ENABLED     = (1 << 5),
387 };
388
389 void arch_ftrace_update_code(int command);
390
391 struct ftrace_rec_iter;
392
393 struct ftrace_rec_iter *ftrace_rec_iter_start(void);
394 struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
395 struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
396
397 #define for_ftrace_rec_iter(iter)               \
398         for (iter = ftrace_rec_iter_start();    \
399              iter;                              \
400              iter = ftrace_rec_iter_next(iter))
401
402
403 int ftrace_update_record(struct dyn_ftrace *rec, int enable);
404 int ftrace_test_record(struct dyn_ftrace *rec, int enable);
405 void ftrace_run_stop_machine(int command);
406 unsigned long ftrace_location(unsigned long ip);
407
408 extern ftrace_func_t ftrace_trace_function;
409
410 int ftrace_regex_open(struct ftrace_ops *ops, int flag,
411                   struct inode *inode, struct file *file);
412 ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
413                             size_t cnt, loff_t *ppos);
414 ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
415                              size_t cnt, loff_t *ppos);
416 int ftrace_regex_release(struct inode *inode, struct file *file);
417
418 void __init
419 ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
420
421 /* defined in arch */
422 extern int ftrace_ip_converted(unsigned long ip);
423 extern int ftrace_dyn_arch_init(void);
424 extern void ftrace_replace_code(int enable);
425 extern int ftrace_update_ftrace_func(ftrace_func_t func);
426 extern void ftrace_caller(void);
427 extern void ftrace_regs_caller(void);
428 extern void ftrace_call(void);
429 extern void ftrace_regs_call(void);
430 extern void mcount_call(void);
431
432 void ftrace_modify_all_code(int command);
433
434 #ifndef FTRACE_ADDR
435 #define FTRACE_ADDR ((unsigned long)ftrace_caller)
436 #endif
437
438 #ifndef FTRACE_REGS_ADDR
439 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
440 # define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
441 #else
442 # define FTRACE_REGS_ADDR FTRACE_ADDR
443 #endif
444 #endif
445
446 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
447 extern void ftrace_graph_caller(void);
448 extern int ftrace_enable_ftrace_graph_caller(void);
449 extern int ftrace_disable_ftrace_graph_caller(void);
450 #else
451 static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
452 static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
453 #endif
454
455 /**
456  * ftrace_make_nop - convert code into nop
457  * @mod: module structure if called by module load initialization
458  * @rec: the mcount call site record
459  * @addr: the address that the call site should be calling
460  *
461  * This is a very sensitive operation and great care needs
462  * to be taken by the arch.  The operation should carefully
463  * read the location, check to see if what is read is indeed
464  * what we expect it to be, and then on success of the compare,
465  * it should write to the location.
466  *
467  * The code segment at @rec->ip should be a caller to @addr
468  *
469  * Return must be:
470  *  0 on success
471  *  -EFAULT on error reading the location
472  *  -EINVAL on a failed compare of the contents
473  *  -EPERM  on error writing to the location
474  * Any other value will be considered a failure.
475  */
476 extern int ftrace_make_nop(struct module *mod,
477                            struct dyn_ftrace *rec, unsigned long addr);
478
479 /**
480  * ftrace_make_call - convert a nop call site into a call to addr
481  * @rec: the mcount call site record
482  * @addr: the address that the call site should call
483  *
484  * This is a very sensitive operation and great care needs
485  * to be taken by the arch.  The operation should carefully
486  * read the location, check to see if what is read is indeed
487  * what we expect it to be, and then on success of the compare,
488  * it should write to the location.
489  *
490  * The code segment at @rec->ip should be a nop
491  *
492  * Return must be:
493  *  0 on success
494  *  -EFAULT on error reading the location
495  *  -EINVAL on a failed compare of the contents
496  *  -EPERM  on error writing to the location
497  * Any other value will be considered a failure.
498  */
499 extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
500
501 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
502 /**
503  * ftrace_modify_call - convert from one addr to another (no nop)
504  * @rec: the mcount call site record
505  * @old_addr: the address expected to be currently called to
506  * @addr: the address to change to
507  *
508  * This is a very sensitive operation and great care needs
509  * to be taken by the arch.  The operation should carefully
510  * read the location, check to see if what is read is indeed
511  * what we expect it to be, and then on success of the compare,
512  * it should write to the location.
513  *
514  * The code segment at @rec->ip should be a caller to @old_addr
515  *
516  * Return must be:
517  *  0 on success
518  *  -EFAULT on error reading the location
519  *  -EINVAL on a failed compare of the contents
520  *  -EPERM  on error writing to the location
521  * Any other value will be considered a failure.
522  */
523 extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
524                               unsigned long addr);
525 #else
526 /* Should never be called */
527 static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
528                                      unsigned long addr)
529 {
530         return -EINVAL;
531 }
532 #endif
533
534 /* May be defined in arch */
535 extern int ftrace_arch_read_dyn_info(char *buf, int size);
536
537 extern int skip_trace(unsigned long ip);
538
539 extern void ftrace_disable_daemon(void);
540 extern void ftrace_enable_daemon(void);
541 #else /* CONFIG_DYNAMIC_FTRACE */
542 static inline int skip_trace(unsigned long ip) { return 0; }
543 static inline int ftrace_force_update(void) { return 0; }
544 static inline void ftrace_disable_daemon(void) { }
545 static inline void ftrace_enable_daemon(void) { }
546 static inline void ftrace_release_mod(struct module *mod) {}
547 static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
548 {
549         return -EINVAL;
550 }
551 static inline __init int unregister_ftrace_command(char *cmd_name)
552 {
553         return -EINVAL;
554 }
555 static inline int ftrace_text_reserved(void *start, void *end)
556 {
557         return 0;
558 }
559 static inline unsigned long ftrace_location(unsigned long ip)
560 {
561         return 0;
562 }
563
564 /*
565  * Again users of functions that have ftrace_ops may not
566  * have them defined when ftrace is not enabled, but these
567  * functions may still be called. Use a macro instead of inline.
568  */
569 #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
570 #define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
571 #define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
572 #define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
573 #define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
574 #define ftrace_free_filter(ops) do { } while (0)
575
576 static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
577                             size_t cnt, loff_t *ppos) { return -ENODEV; }
578 static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
579                              size_t cnt, loff_t *ppos) { return -ENODEV; }
580 static inline int
581 ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
582 #endif /* CONFIG_DYNAMIC_FTRACE */
583
584 /* totally disable ftrace - can not re-enable after this */
585 void ftrace_kill(void);
586
587 static inline void tracer_disable(void)
588 {
589 #ifdef CONFIG_FUNCTION_TRACER
590         ftrace_enabled = 0;
591 #endif
592 }
593
594 /*
595  * Ftrace disable/restore without lock. Some synchronization mechanism
596  * must be used to prevent ftrace_enabled to be changed between
597  * disable/restore.
598  */
599 static inline int __ftrace_enabled_save(void)
600 {
601 #ifdef CONFIG_FUNCTION_TRACER
602         int saved_ftrace_enabled = ftrace_enabled;
603         ftrace_enabled = 0;
604         return saved_ftrace_enabled;
605 #else
606         return 0;
607 #endif
608 }
609
610 static inline void __ftrace_enabled_restore(int enabled)
611 {
612 #ifdef CONFIG_FUNCTION_TRACER
613         ftrace_enabled = enabled;
614 #endif
615 }
616
617 #ifndef HAVE_ARCH_CALLER_ADDR
618 # ifdef CONFIG_FRAME_POINTER
619 #  define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
620 #  define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
621 #  define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
622 #  define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3))
623 #  define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4))
624 #  define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5))
625 #  define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6))
626 # else
627 #  define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
628 #  define CALLER_ADDR1 0UL
629 #  define CALLER_ADDR2 0UL
630 #  define CALLER_ADDR3 0UL
631 #  define CALLER_ADDR4 0UL
632 #  define CALLER_ADDR5 0UL
633 #  define CALLER_ADDR6 0UL
634 # endif
635 #endif /* ifndef HAVE_ARCH_CALLER_ADDR */
636
637 #ifdef CONFIG_IRQSOFF_TRACER
638   extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
639   extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
640 #else
641   static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
642   static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
643 #endif
644
645 #ifdef CONFIG_PREEMPT_TRACER
646   extern void trace_preempt_on(unsigned long a0, unsigned long a1);
647   extern void trace_preempt_off(unsigned long a0, unsigned long a1);
648 #else
649 /*
650  * Use defines instead of static inlines because some arches will make code out
651  * of the CALLER_ADDR, when we really want these to be a real nop.
652  */
653 # define trace_preempt_on(a0, a1) do { } while (0)
654 # define trace_preempt_off(a0, a1) do { } while (0)
655 #endif
656
657 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
658 extern void ftrace_init(void);
659 #else
660 static inline void ftrace_init(void) { }
661 #endif
662
663 /*
664  * Structure that defines an entry function trace.
665  */
666 struct ftrace_graph_ent {
667         unsigned long func; /* Current function */
668         int depth;
669 };
670
671 /*
672  * Structure that defines a return function trace.
673  */
674 struct ftrace_graph_ret {
675         unsigned long func; /* Current function */
676         unsigned long long calltime;
677         unsigned long long rettime;
678         /* Number of functions that overran the depth limit for current task */
679         unsigned long overrun;
680         int depth;
681 };
682
683 /* Type of the callback handlers for tracing function graph*/
684 typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
685 typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
686
687 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
688
689 /* for init task */
690 #define INIT_FTRACE_GRAPH               .ret_stack = NULL,
691
692 /*
693  * Stack of return addresses for functions
694  * of a thread.
695  * Used in struct thread_info
696  */
697 struct ftrace_ret_stack {
698         unsigned long ret;
699         unsigned long func;
700         unsigned long long calltime;
701         unsigned long long subtime;
702         unsigned long fp;
703 };
704
705 /*
706  * Primary handler of a function return.
707  * It relays on ftrace_return_to_handler.
708  * Defined in entry_32/64.S
709  */
710 extern void return_to_handler(void);
711
712 extern int
713 ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
714                          unsigned long frame_pointer);
715
716 /*
717  * Sometimes we don't want to trace a function with the function
718  * graph tracer but we want them to keep traced by the usual function
719  * tracer if the function graph tracer is not configured.
720  */
721 #define __notrace_funcgraph             notrace
722
723 /*
724  * We want to which function is an entrypoint of a hardirq.
725  * That will help us to put a signal on output.
726  */
727 #define __irq_entry              __attribute__((__section__(".irqentry.text")))
728
729 /* Limits of hardirq entrypoints */
730 extern char __irqentry_text_start[];
731 extern char __irqentry_text_end[];
732
733 #define FTRACE_NOTRACE_DEPTH 65536
734 #define FTRACE_RETFUNC_DEPTH 50
735 #define FTRACE_RETSTACK_ALLOC_SIZE 32
736 extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
737                                 trace_func_graph_ent_t entryfunc);
738
739 extern void ftrace_graph_stop(void);
740
741 /* The current handlers in use */
742 extern trace_func_graph_ret_t ftrace_graph_return;
743 extern trace_func_graph_ent_t ftrace_graph_entry;
744
745 extern void unregister_ftrace_graph(void);
746
747 extern void ftrace_graph_init_task(struct task_struct *t);
748 extern void ftrace_graph_exit_task(struct task_struct *t);
749 extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
750
751 static inline int task_curr_ret_stack(struct task_struct *t)
752 {
753         return t->curr_ret_stack;
754 }
755
756 static inline void pause_graph_tracing(void)
757 {
758         atomic_inc(&current->tracing_graph_pause);
759 }
760
761 static inline void unpause_graph_tracing(void)
762 {
763         atomic_dec(&current->tracing_graph_pause);
764 }
765 #else /* !CONFIG_FUNCTION_GRAPH_TRACER */
766
767 #define __notrace_funcgraph
768 #define __irq_entry
769 #define INIT_FTRACE_GRAPH
770
771 static inline void ftrace_graph_init_task(struct task_struct *t) { }
772 static inline void ftrace_graph_exit_task(struct task_struct *t) { }
773 static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
774
775 static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
776                           trace_func_graph_ent_t entryfunc)
777 {
778         return -1;
779 }
780 static inline void unregister_ftrace_graph(void) { }
781
782 static inline int task_curr_ret_stack(struct task_struct *tsk)
783 {
784         return -1;
785 }
786
787 static inline void pause_graph_tracing(void) { }
788 static inline void unpause_graph_tracing(void) { }
789 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
790
791 #ifdef CONFIG_TRACING
792
793 /* flags for current->trace */
794 enum {
795         TSK_TRACE_FL_TRACE_BIT  = 0,
796         TSK_TRACE_FL_GRAPH_BIT  = 1,
797 };
798 enum {
799         TSK_TRACE_FL_TRACE      = 1 << TSK_TRACE_FL_TRACE_BIT,
800         TSK_TRACE_FL_GRAPH      = 1 << TSK_TRACE_FL_GRAPH_BIT,
801 };
802
803 static inline void set_tsk_trace_trace(struct task_struct *tsk)
804 {
805         set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
806 }
807
808 static inline void clear_tsk_trace_trace(struct task_struct *tsk)
809 {
810         clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
811 }
812
813 static inline int test_tsk_trace_trace(struct task_struct *tsk)
814 {
815         return tsk->trace & TSK_TRACE_FL_TRACE;
816 }
817
818 static inline void set_tsk_trace_graph(struct task_struct *tsk)
819 {
820         set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
821 }
822
823 static inline void clear_tsk_trace_graph(struct task_struct *tsk)
824 {
825         clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
826 }
827
828 static inline int test_tsk_trace_graph(struct task_struct *tsk)
829 {
830         return tsk->trace & TSK_TRACE_FL_GRAPH;
831 }
832
833 enum ftrace_dump_mode;
834
835 extern enum ftrace_dump_mode ftrace_dump_on_oops;
836
837 extern void disable_trace_on_warning(void);
838 extern int __disable_trace_on_warning;
839
840 #ifdef CONFIG_PREEMPT
841 #define INIT_TRACE_RECURSION            .trace_recursion = 0,
842 #endif
843
844 #else /* CONFIG_TRACING */
845 static inline void  disable_trace_on_warning(void) { }
846 #endif /* CONFIG_TRACING */
847
848 #ifndef INIT_TRACE_RECURSION
849 #define INIT_TRACE_RECURSION
850 #endif
851
852 #ifdef CONFIG_FTRACE_SYSCALLS
853
854 unsigned long arch_syscall_addr(int nr);
855
856 #endif /* CONFIG_FTRACE_SYSCALLS */
857
858 #endif /* _LINUX_FTRACE_H */