]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - include/linux/usb/tegra_usb_phy.h
arm: imx6: defconfig: update tx6 defconfigs
[karo-tx-linux.git] / include / linux / usb / tegra_usb_phy.h
1 /*
2  * Copyright (C) 2010 Google, Inc.
3  *
4  * This software is licensed under the terms of the GNU General Public
5  * License version 2, as published by the Free Software Foundation, and
6  * may be copied, distributed, and modified under those terms.
7  *
8  * This program is distributed in the hope that it will be useful,
9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  *
13  */
14
15 #ifndef __TEGRA_USB_PHY_H
16 #define __TEGRA_USB_PHY_H
17
18 #include <linux/clk.h>
19 #include <linux/usb/otg.h>
20
21 /*
22  * utmi_pll_config_in_car_module: true if the UTMI PLL configuration registers
23  *     should be set up by clk-tegra, false if by the PHY code
24  * has_hostpc: true if the USB controller has the HOSTPC extension, which
25  *     changes the location of the PHCD and PTS fields
26  * requires_usbmode_setup: true if the USBMODE register needs to be set to
27  *      enter host mode
28  * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level
29  *      and hsdiscon_level should be set for adequate signal quality
30  */
31
32 struct tegra_phy_soc_config {
33         bool utmi_pll_config_in_car_module;
34         bool has_hostpc;
35         bool requires_usbmode_setup;
36         bool requires_extra_tuning_parameters;
37 };
38
39 struct tegra_utmip_config {
40         u8 hssync_start_delay;
41         u8 elastic_limit;
42         u8 idle_wait_delay;
43         u8 term_range_adj;
44         bool xcvr_setup_use_fuses;
45         u8 xcvr_setup;
46         u8 xcvr_lsfslew;
47         u8 xcvr_lsrslew;
48         u8 xcvr_hsslew;
49         u8 hssquelch_level;
50         u8 hsdiscon_level;
51 };
52
53 enum tegra_usb_phy_port_speed {
54         TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
55         TEGRA_USB_PHY_PORT_SPEED_LOW,
56         TEGRA_USB_PHY_PORT_SPEED_HIGH,
57 };
58
59 struct tegra_xtal_freq;
60
61 struct tegra_usb_phy {
62         int instance;
63         const struct tegra_xtal_freq *freq;
64         void __iomem *regs;
65         void __iomem *pad_regs;
66         struct clk *clk;
67         struct clk *pll_u;
68         struct clk *pad_clk;
69         struct regulator *vbus;
70         enum usb_dr_mode mode;
71         void *config;
72         const struct tegra_phy_soc_config *soc_config;
73         struct usb_phy *ulpi;
74         struct usb_phy u_phy;
75         bool is_legacy_phy;
76         bool is_ulpi_phy;
77         int reset_gpio;
78 };
79
80 void tegra_usb_phy_preresume(struct usb_phy *phy);
81
82 void tegra_usb_phy_postresume(struct usb_phy *phy);
83
84 void tegra_ehci_phy_restore_start(struct usb_phy *phy,
85                                  enum tegra_usb_phy_port_speed port_speed);
86
87 void tegra_ehci_phy_restore_end(struct usb_phy *phy);
88
89 #endif /* __TEGRA_USB_PHY_H */