#include <linux/spi/spi.h>
#include <linux/spi/tsc2005.h>
#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
/*
* The touchscreen interface operates as follows:
#define TSC2005_SPI_MAX_SPEED_HZ 10000000
#define TSC2005_PENUP_TIME_MS 40
-struct tsc2005_spi_rd {
- struct spi_transfer spi_xfer;
- u32 spi_tx;
- u32 spi_rx;
+static const struct regmap_range tsc2005_writable_ranges[] = {
+ regmap_reg_range(TSC2005_REG_AUX_HIGH, TSC2005_REG_CFR2),
};
+static const struct regmap_access_table tsc2005_writable_table = {
+ .yes_ranges = tsc2005_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(tsc2005_writable_ranges),
+};
+
+static struct regmap_config tsc2005_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .reg_stride = 0x08,
+ .max_register = 0x78,
+ .read_flag_mask = TSC2005_REG_READ,
+ .write_flag_mask = TSC2005_REG_PND0,
+ .wr_table = &tsc2005_writable_table,
+ .use_single_rw = true,
+};
+
+struct tsc2005_data {
+ u16 x;
+ u16 y;
+ u16 z1;
+ u16 z2;
+} __packed;
+#define TSC2005_DATA_REGS 4
+
struct tsc2005 {
struct spi_device *spi;
-
- struct spi_message spi_read_msg;
- struct tsc2005_spi_rd spi_x;
- struct tsc2005_spi_rd spi_y;
- struct tsc2005_spi_rd spi_z1;
- struct tsc2005_spi_rd spi_z2;
+ struct regmap *regmap;
struct input_dev *idev;
char phys[32];
return 0;
}
-static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value)
-{
- u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value;
- struct spi_transfer xfer = {
- .tx_buf = &tx,
- .len = 4,
- .bits_per_word = 24,
- };
- struct spi_message msg;
- int error;
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- error = spi_sync(ts->spi, &msg);
- if (error) {
- dev_err(&ts->spi->dev,
- "%s: failed, register: %x, value: %x, error: %d\n",
- __func__, reg, value, error);
- return error;
- }
-
- return 0;
-}
-
-static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last)
-{
- memset(rd, 0, sizeof(*rd));
-
- rd->spi_tx = (reg | TSC2005_REG_READ) << 16;
- rd->spi_xfer.tx_buf = &rd->spi_tx;
- rd->spi_xfer.rx_buf = &rd->spi_rx;
- rd->spi_xfer.len = 4;
- rd->spi_xfer.bits_per_word = 24;
- rd->spi_xfer.cs_change = !last;
-}
-
-static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value)
-{
- struct tsc2005_spi_rd spi_rd;
- struct spi_message msg;
- int error;
-
- tsc2005_setup_read(&spi_rd, reg, true);
-
- spi_message_init(&msg);
- spi_message_add_tail(&spi_rd.spi_xfer, &msg);
-
- error = spi_sync(ts->spi, &msg);
- if (error)
- return error;
-
- *value = spi_rd.spi_rx;
- return 0;
-}
-
static void tsc2005_update_pen_state(struct tsc2005 *ts,
int x, int y, int pressure)
{
struct tsc2005 *ts = _ts;
unsigned long flags;
unsigned int pressure;
- u32 x, y;
- u32 z1, z2;
+ struct tsc2005_data tsdata;
int error;
/* read the coordinates */
- error = spi_sync(ts->spi, &ts->spi_read_msg);
+ error = regmap_bulk_read(ts->regmap, TSC2005_REG_X, &tsdata,
+ TSC2005_DATA_REGS);
if (unlikely(error))
goto out;
- x = ts->spi_x.spi_rx;
- y = ts->spi_y.spi_rx;
- z1 = ts->spi_z1.spi_rx;
- z2 = ts->spi_z2.spi_rx;
-
/* validate position */
- if (unlikely(x > MAX_12BIT || y > MAX_12BIT))
+ if (unlikely(tsdata.x > MAX_12BIT || tsdata.y > MAX_12BIT))
goto out;
/* Skip reading if the pressure components are out of range */
- if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2))
+ if (unlikely(tsdata.z1 == 0 || tsdata.z2 > MAX_12BIT))
+ goto out;
+ if (unlikely(tsdata.z1 >= tsdata.z2))
goto out;
/*
* the value before pen-up - that implies SPI fed us stale data
*/
if (!ts->pen_down &&
- ts->in_x == x && ts->in_y == y &&
- ts->in_z1 == z1 && ts->in_z2 == z2) {
+ ts->in_x == tsdata.x && ts->in_y == tsdata.y &&
+ ts->in_z1 == tsdata.z1 && ts->in_z2 == tsdata.z2) {
goto out;
}
* At this point we are happy we have a valid and useful reading.
* Remember it for later comparisons. We may now begin downsampling.
*/
- ts->in_x = x;
- ts->in_y = y;
- ts->in_z1 = z1;
- ts->in_z2 = z2;
+ ts->in_x = tsdata.x;
+ ts->in_y = tsdata.y;
+ ts->in_z1 = tsdata.z1;
+ ts->in_z2 = tsdata.z2;
/* Compute touch pressure resistance using equation #1 */
- pressure = x * (z2 - z1) / z1;
+ pressure = tsdata.x * (tsdata.z2 - tsdata.z1) / tsdata.z1;
pressure = pressure * ts->x_plate_ohm / 4096;
if (unlikely(pressure > MAX_12BIT))
goto out;
spin_lock_irqsave(&ts->lock, flags);
- tsc2005_update_pen_state(ts, x, y, pressure);
+ tsc2005_update_pen_state(ts, tsdata.x, tsdata.y, pressure);
mod_timer(&ts->penup_timer,
jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS));
static void tsc2005_start_scan(struct tsc2005 *ts)
{
- tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
- tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
- tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
+ regmap_write(ts->regmap, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
+ regmap_write(ts->regmap, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
+ regmap_write(ts->regmap, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
tsc2005_cmd(ts, TSC2005_CMD_NORMAL);
}
{
struct spi_device *spi = to_spi_device(dev);
struct tsc2005 *ts = spi_get_drvdata(spi);
- u16 temp_high;
- u16 temp_high_orig;
- u16 temp_high_test;
+ unsigned int temp_high;
+ unsigned int temp_high_orig;
+ unsigned int temp_high_test;
bool success = true;
int error;
*/
__tsc2005_disable(ts);
- error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
+ error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
if (error) {
dev_warn(dev, "selftest failed: read error %d\n", error);
success = false;
temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
- error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test);
+ error = regmap_write(ts->regmap, TSC2005_REG_TEMP_HIGH, temp_high_test);
if (error) {
dev_warn(dev, "selftest failed: write error %d\n", error);
success = false;
goto out;
}
- error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
+ error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high);
if (error) {
dev_warn(dev, "selftest failed: read error %d after write\n",
error);
goto out;
/* test that the reset really happened */
- error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
+ error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high);
if (error) {
dev_warn(dev, "selftest failed: read error %d after reset\n",
error);
{
struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work);
int error;
- u16 r;
+ unsigned int r;
if (!mutex_trylock(&ts->mutex)) {
/*
goto out;
/* We should be able to read register without disabling interrupts. */
- error = tsc2005_read(ts, TSC2005_REG_CFR0, &r);
+ error = regmap_read(ts->regmap, TSC2005_REG_CFR0, &r);
if (!error &&
!((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) {
goto out;
mutex_unlock(&ts->mutex);
}
-static void tsc2005_setup_spi_xfer(struct tsc2005 *ts)
-{
- tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false);
- tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false);
- tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false);
- tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true);
-
- spi_message_init(&ts->spi_read_msg);
- spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg);
- spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg);
- spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg);
- spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg);
-}
-
static int tsc2005_probe(struct spi_device *spi)
{
const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev);
ts->spi = spi;
ts->idev = input_dev;
+ ts->regmap = devm_regmap_init_spi(spi, &tsc2005_regmap_config);
+ if (IS_ERR(ts->regmap))
+ return PTR_ERR(ts->regmap);
+
ts->x_plate_ohm = x_plate_ohm;
ts->esd_timeout = esd_timeout;
INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work);
- tsc2005_setup_spi_xfer(ts);
-
snprintf(ts->phys, sizeof(ts->phys),
"%s/input-ts", dev_name(&spi->dev));
projects / karo-tx-linux.git / commitdiff