]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
hwmon: Add driver for AMD family 15h processor power information
authorAndreas Herrmann <andreas.herrmann3@amd.com>
Wed, 25 May 2011 18:43:31 +0000 (20:43 +0200)
committerJean Delvare <khali@endymion.delvare>
Wed, 25 May 2011 18:43:31 +0000 (20:43 +0200)
This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Documentation/hwmon/fam15h_power [new file with mode: 0644]
MAINTAINERS
drivers/hwmon/Kconfig
drivers/hwmon/Makefile
drivers/hwmon/fam15h_power.c [new file with mode: 0644]

diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power
new file mode 100644 (file)
index 0000000..a92918e
--- /dev/null
@@ -0,0 +1,37 @@
+Kernel driver fam15h_power
+==========================
+
+Supported chips:
+* AMD Family 15h Processors
+
+  Prefix: 'fam15h_power'
+  Addresses scanned: PCI space
+  Datasheets:
+  BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
+    (not yet published)
+
+Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+
+Description
+-----------
+
+This driver permits reading of registers providing power information
+of AMD Family 15h processors.
+
+For AMD Family 15h processors the following power values can be
+calculated using different processor northbridge function registers:
+
+* BasePwrWatts: Specifies in watts the maximum amount of power
+  consumed by the processor for NB and logic external to the core.
+* ProcessorPwrWatts: Specifies in watts the maximum amount of power
+  the processor can support.
+* CurrPwrWatts: Specifies in watts the current amount of power being
+  consumed by the processor.
+
+This driver provides ProcessorPwrWatts and CurrPwrWatts:
+* power1_crit (ProcessorPwrWatts)
+* power1_input (CurrPwrWatts)
+
+On multi-node processors the calculated value is for the entire
+package and not for a single node. Thus the driver creates sysfs
+attributes only for internal node0 of a multi-node processor.
index 98c324b07a164913d171d4ef6d07592940b8facf..88a5bef094735fce7e7de95f8addf00045698bc4 100644 (file)
@@ -483,6 +483,13 @@ F: drivers/tty/serial/altera_jtaguart.c
 F:     include/linux/altera_uart.h
 F:     include/linux/altera_jtaguart.h
 
+AMD FAM15H PROCESSOR POWER MONITORING DRIVER
+M:     Andreas Herrmann <andreas.herrmann3@amd.com>
+L:     lm-sensors@lm-sensors.org
+S:     Maintained
+F:     Documentation/hwmon/fam15h_power
+F:     drivers/hwmon/fam15h_power.c
+
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 M:     Thomas Dahlmann <dahlmann.thomas@arcor.de>
 L:     linux-geode@lists.infradead.org (moderated for non-subscribers)
index 511f1f4802f1153ac2075278b1be04f4cd06a4d3..567dfae94bbc27034d5bd0cce9e997863897fefa 100644 (file)
@@ -248,6 +248,16 @@ config SENSORS_K10TEMP
          This driver can also be built as a module.  If so, the module
          will be called k10temp.
 
+config SENSORS_FAM15H_POWER
+       tristate "AMD Family 15h processor power"
+       depends on X86 && PCI
+       help
+         If you say yes here you get support for processor power
+         information of your AMD family 15h CPU.
+
+         This driver can also be built as a module.  If so, the module
+         will be called fam15h_power.
+
 config SENSORS_ASB100
        tristate "Asus ASB100 Bach"
        depends on X86 && I2C && EXPERIMENTAL
index 28e8d52f637923fdfc1e15200fce281760439ac4..8524db270bf037aea7ba3aefcadc7d9d36306b5d 100644 (file)
@@ -48,6 +48,7 @@ obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
 obj-$(CONFIG_SENSORS_F71805F)  += f71805f.o
 obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
 obj-$(CONFIG_SENSORS_F75375S)  += f75375s.o
+obj-$(CONFIG_SENSORS_FAM15H_POWER) += fam15h_power.o
 obj-$(CONFIG_SENSORS_FSCHMD)   += fschmd.o
 obj-$(CONFIG_SENSORS_G760A)    += g760a.o
 obj-$(CONFIG_SENSORS_GL518SM)  += gl518sm.o
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
new file mode 100644 (file)
index 0000000..523f8fb
--- /dev/null
@@ -0,0 +1,229 @@
+/*
+ * fam15h_power.c - AMD Family 15h processor power monitoring
+ *
+ * Copyright (c) 2011 Advanced Micro Devices, Inc.
+ * Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+ *
+ *
+ * This driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+
+MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
+MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
+MODULE_LICENSE("GPL");
+
+/* D18F3 */
+#define REG_NORTHBRIDGE_CAP            0xe8
+
+/* D18F4 */
+#define REG_PROCESSOR_TDP              0x1b8
+
+/* D18F5 */
+#define REG_TDP_RUNNING_AVERAGE                0xe0
+#define REG_TDP_LIMIT3                 0xe8
+
+struct fam15h_power_data {
+       struct device *hwmon_dev;
+       unsigned int tdp_to_watts;
+       unsigned int base_tdp;
+       unsigned int processor_pwr_watts;
+};
+
+static ssize_t show_power(struct device *dev,
+                         struct device_attribute *attr, char *buf)
+{
+       u32 val, tdp_limit, running_avg_range;
+       s32 running_avg_capture;
+       u64 curr_pwr_watts;
+       struct pci_dev *f4 = to_pci_dev(dev);
+       struct fam15h_power_data *data = dev_get_drvdata(dev);
+
+       pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
+                                 REG_TDP_RUNNING_AVERAGE, &val);
+       running_avg_capture = (val >> 4) & 0x3fffff;
+       running_avg_capture = sign_extend32(running_avg_capture, 22);
+       running_avg_range = val & 0xf;
+
+       pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
+                                 REG_TDP_LIMIT3, &val);
+
+       tdp_limit = val >> 16;
+       curr_pwr_watts = tdp_limit + data->base_tdp -
+               (s32)(running_avg_capture >> (running_avg_range + 1));
+       curr_pwr_watts *= data->tdp_to_watts;
+
+       /*
+        * Convert to microWatt
+        *
+        * power is in Watt provided as fixed point integer with
+        * scaling factor 1/(2^16).  For conversion we use
+        * (10^6)/(2^16) = 15625/(2^10)
+        */
+       curr_pwr_watts = (curr_pwr_watts * 15625) >> 10;
+       return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts);
+}
+static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL);
+
+static ssize_t show_power_crit(struct device *dev,
+                              struct device_attribute *attr, char *buf)
+{
+       struct fam15h_power_data *data = dev_get_drvdata(dev);
+
+       return sprintf(buf, "%u\n", data->processor_pwr_watts);
+}
+static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
+
+static ssize_t show_name(struct device *dev,
+                        struct device_attribute *attr, char *buf)
+{
+       return sprintf(buf, "fam15h_power\n");
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static struct attribute *fam15h_power_attrs[] = {
+       &dev_attr_power1_input.attr,
+       &dev_attr_power1_crit.attr,
+       &dev_attr_name.attr,
+       NULL
+};
+
+static const struct attribute_group fam15h_power_attr_group = {
+       .attrs  = fam15h_power_attrs,
+};
+
+static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4)
+{
+       u32 val;
+
+       pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 3),
+                                 REG_NORTHBRIDGE_CAP, &val);
+       if ((val & BIT(29)) && ((val >> 30) & 3))
+               return false;
+
+       return true;
+}
+
+static void __devinit fam15h_power_init_data(struct pci_dev *f4,
+                                            struct fam15h_power_data *data)
+{
+       u32 val;
+       u64 tmp;
+
+       pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
+       data->base_tdp = val >> 16;
+       tmp = val & 0xffff;
+
+       pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
+                                 REG_TDP_LIMIT3, &val);
+
+       data->tdp_to_watts = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f);
+       tmp *= data->tdp_to_watts;
+
+       /* result not allowed to be >= 256W */
+       if ((tmp >> 16) >= 256)
+               dev_warn(&f4->dev, "Bogus value for ProcessorPwrWatts "
+                        "(processor_pwr_watts>=%u)\n",
+                        (unsigned int) (tmp >> 16));
+
+       /* convert to microWatt */
+       data->processor_pwr_watts = (tmp * 15625) >> 10;
+}
+
+static int __devinit fam15h_power_probe(struct pci_dev *pdev,
+                                       const struct pci_device_id *id)
+{
+       struct fam15h_power_data *data;
+       struct device *dev;
+       int err;
+
+       if (!fam15h_power_is_internal_node0(pdev)) {
+               err = -ENODEV;
+               goto exit;
+       }
+
+       data = kzalloc(sizeof(struct fam15h_power_data), GFP_KERNEL);
+       if (!data) {
+               err = -ENOMEM;
+               goto exit;
+       }
+       fam15h_power_init_data(pdev, data);
+       dev = &pdev->dev;
+
+       dev_set_drvdata(dev, data);
+       err = sysfs_create_group(&dev->kobj, &fam15h_power_attr_group);
+       if (err)
+               goto exit_free_data;
+
+       data->hwmon_dev = hwmon_device_register(dev);
+       if (IS_ERR(data->hwmon_dev)) {
+               err = PTR_ERR(data->hwmon_dev);
+               goto exit_remove_group;
+       }
+
+       return 0;
+
+exit_remove_group:
+       sysfs_remove_group(&dev->kobj, &fam15h_power_attr_group);
+exit_free_data:
+       kfree(data);
+exit:
+       return err;
+}
+
+static void __devexit fam15h_power_remove(struct pci_dev *pdev)
+{
+       struct device *dev;
+       struct fam15h_power_data *data;
+
+       dev = &pdev->dev;
+       data = dev_get_drvdata(dev);
+       hwmon_device_unregister(data->hwmon_dev);
+       sysfs_remove_group(&dev->kobj, &fam15h_power_attr_group);
+       dev_set_drvdata(dev, NULL);
+       kfree(data);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = {
+       { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+       {}
+};
+MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
+
+static struct pci_driver fam15h_power_driver = {
+       .name = "fam15h_power",
+       .id_table = fam15h_power_id_table,
+       .probe = fam15h_power_probe,
+       .remove = __devexit_p(fam15h_power_remove),
+};
+
+static int __init fam15h_power_init(void)
+{
+       return pci_register_driver(&fam15h_power_driver);
+}
+
+static void __exit fam15h_power_exit(void)
+{
+       pci_unregister_driver(&fam15h_power_driver);
+}
+
+module_init(fam15h_power_init)
+module_exit(fam15h_power_exit)