#include <target/target_core_transport.h>
#include <target/target_core_fabric_ops.h>
#include "target_core_ua.h"
+#include "target_core_cdb.h"
static void
target_fill_alua_data(struct se_port *port, unsigned char *buf)
return 0;
}
-static int
-target_emulate_inquiry(struct se_task *task)
+int target_emulate_inquiry(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
return ret;
}
-static int
-target_emulate_readcapacity(struct se_task *task)
+int target_emulate_readcapacity(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
return 0;
}
-static int
-target_emulate_readcapacity_16(struct se_task *task)
+int target_emulate_readcapacity_16(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
}
}
-static int
-target_emulate_modesense(struct se_task *task)
+int target_emulate_modesense(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
return 0;
}
-static int
-target_emulate_request_sense(struct se_task *task)
+int target_emulate_request_sense(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
unsigned char *cdb = cmd->t_task_cdb;
* Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
* Note this is not used for TCM/pSCSI passthrough
*/
-static int
-target_emulate_unmap(struct se_task *task)
+int target_emulate_unmap(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
* Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
* Note this is not used for TCM/pSCSI passthrough
*/
-static int
-target_emulate_write_same(struct se_task *task)
+int target_emulate_write_same(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
return 0;
}
-static int
-target_emulate_synchronize_cache(struct se_task *task)
+int target_emulate_synchronize_cache(struct se_task *task)
{
struct se_device *dev = task->task_se_cmd->se_dev;
return 0;
}
-static int
-target_emulate_noop(struct se_task *task)
+int target_emulate_noop(struct se_task *task)
{
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return 0;
}
-int
-transport_emulate_control_cdb(struct se_task *task)
-{
- struct se_cmd *cmd = task->task_se_cmd;
- struct se_device *dev = cmd->se_dev;
- unsigned short service_action;
- int ret = 0;
-
- switch (cmd->t_task_cdb[0]) {
- case INQUIRY:
- ret = target_emulate_inquiry(task);
- break;
- case READ_CAPACITY:
- ret = target_emulate_readcapacity(task);
- break;
- case MODE_SENSE:
- ret = target_emulate_modesense(task);
- break;
- case MODE_SENSE_10:
- ret = target_emulate_modesense(task);
- break;
- case SERVICE_ACTION_IN:
- switch (cmd->t_task_cdb[1] & 0x1f) {
- case SAI_READ_CAPACITY_16:
- ret = target_emulate_readcapacity_16(task);
- break;
- default:
- pr_err("Unsupported SA: 0x%02x\n",
- cmd->t_task_cdb[1] & 0x1f);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
- break;
- case REQUEST_SENSE:
- ret = target_emulate_request_sense(task);
- break;
- case UNMAP:
- ret = target_emulate_unmap(task);
- break;
- case WRITE_SAME:
- ret = target_emulate_write_same(task);
- break;
- case WRITE_SAME_16:
- ret = target_emulate_write_same(task);
- break;
- case VARIABLE_LENGTH_CMD:
- service_action =
- get_unaligned_be16(&cmd->t_task_cdb[8]);
- switch (service_action) {
- case WRITE_SAME_32:
- ret = target_emulate_write_same(task);
- break;
- default:
- pr_err("Unsupported VARIABLE_LENGTH_CMD SA:"
- " 0x%02x\n", service_action);
- break;
- }
- break;
- case SYNCHRONIZE_CACHE:
- case 0x91: /* SYNCHRONIZE_CACHE_16: */
- ret = target_emulate_synchronize_cache(task);
- break;
- case ALLOW_MEDIUM_REMOVAL:
- case ERASE:
- case REZERO_UNIT:
- case SEEK_10:
- case SPACE:
- case START_STOP:
- case TEST_UNIT_READY:
- case VERIFY:
- case WRITE_FILEMARKS:
- ret = target_emulate_noop(task);
- break;
- default:
- pr_err("Unsupported SCSI Opcode: 0x%02x for %s\n",
- cmd->t_task_cdb[0], dev->transport->name);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
-
- if (ret < 0)
- return ret;
- return PYX_TRANSPORT_SENT_TO_TRANSPORT;
-}
-
/*
* Write a CDB into @cdb that is based on the one the intiator sent us,
* but updated to only cover the sectors that the current task handles.
#include <target/target_core_configfs.h>
#include "target_core_alua.h"
+#include "target_core_cdb.h"
#include "target_core_hba.h"
#include "target_core_pr.h"
#include "target_core_ua.h"
atomic_set(&cmd->t_transport_sent, 1);
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- /*
- * The struct se_cmd->execute_task() function pointer is used
- * to grab REPORT_LUNS and other CDBs we want to handle before they hit the
- * struct se_subsystem_api->do_task() caller below.
- */
- if (cmd->execute_task) {
- error = cmd->execute_task(task);
- } else {
- /*
- * Currently for all virtual TCM plugins including IBLOCK, FILEIO and
- * RAMDISK we use the internal transport_emulate_control_cdb() logic
- * with struct se_subsystem_api callers for the primary SPC-3 TYPE_DISK
- * LUN emulation code.
- *
- * For TCM/pSCSI and all other SCF_SCSI_DATA_SG_IO_CDB I/O tasks we
- * call ->do_task() directly and let the underlying TCM subsystem plugin
- * code handle the CDB emulation.
- */
- if ((dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) &&
- (!(task->task_se_cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
- error = transport_emulate_control_cdb(task);
- else
- error = dev->transport->do_task(task);
- }
+ if (cmd->execute_task)
+ error = cmd->execute_task(task);
+ else
+ error = dev->transport->do_task(task);
if (error != 0) {
cmd->transport_error_status = error;
spin_lock_irqsave(&cmd->t_state_lock, flags);
*/
}
+ /*
+ * If we operate in passthrough mode we skip most CDB emulation and
+ * instead hand the commands down to the physical SCSI device.
+ */
+ passthrough =
+ (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV);
+
switch (cdb[0]) {
case READ_6:
sectors = transport_get_sectors_6(cdb, cmd, §or_ret);
cmd->t_task_lba = transport_lba_32(cdb);
cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- if (dev->transport->transport_type ==
- TRANSPORT_PLUGIN_PHBA_PDEV)
+ /*
+ * Do now allow BIDI commands for passthrough mode.
+ */
+ if (passthrough)
goto out_unsupported_cdb;
+
/*
* Setup BIDI XOR callback to be run after I/O completion.
*/
break;
case VARIABLE_LENGTH_CMD:
service_action = get_unaligned_be16(&cdb[8]);
- /*
- * Determine if this is TCM/PSCSI device and we should disable
- * internal emulation for this CDB.
- */
- passthrough = (dev->transport->transport_type ==
- TRANSPORT_PLUGIN_PHBA_PDEV);
-
switch (service_action) {
case XDWRITEREAD_32:
sectors = transport_get_sectors_32(cdb, cmd, §or_ret);
cmd->t_task_lba = transport_lba_64_ext(cdb);
cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
+ /*
+ * Do now allow BIDI commands for passthrough mode.
+ */
if (passthrough)
goto out_unsupported_cdb;
+
/*
* Setup BIDI XOR callback to be run during after I/O
* completion.
if (target_check_write_same_discard(&cdb[10], dev) < 0)
goto out_invalid_cdb_field;
-
+ if (!passthrough)
+ cmd->execute_task = target_emulate_write_same;
break;
default:
pr_err("VARIABLE_LENGTH_CMD service action"
case MODE_SENSE:
size = cdb[4];
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_modesense;
break;
case MODE_SENSE_10:
+ size = (cdb[7] << 8) + cdb[8];
+ cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_modesense;
+ break;
case GPCMD_READ_BUFFER_CAPACITY:
case GPCMD_SEND_OPC:
case LOG_SELECT:
if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED)
cmd->sam_task_attr = MSG_HEAD_TAG;
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_inquiry;
break;
case READ_BUFFER:
size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
case READ_CAPACITY:
size = READ_CAP_LEN;
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_readcapacity;
break;
case READ_MEDIA_SERIAL_NUMBER:
case SECURITY_PROTOCOL_IN:
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
break;
case SERVICE_ACTION_IN:
+ switch (cmd->t_task_cdb[1] & 0x1f) {
+ case SAI_READ_CAPACITY_16:
+ if (!passthrough)
+ cmd->execute_task =
+ target_emulate_readcapacity_16;
+ break;
+ default:
+ if (passthrough)
+ break;
+
+ pr_err("Unsupported SA: 0x%02x\n",
+ cmd->t_task_cdb[1] & 0x1f);
+ goto out_unsupported_cdb;
+ }
+ /*FALLTHROUGH*/
case ACCESS_CONTROL_IN:
case ACCESS_CONTROL_OUT:
case EXTENDED_COPY:
case REQUEST_SENSE:
size = cdb[4];
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_request_sense;
break;
case READ_ELEMENT_STATUS:
size = 65536 * cdb[7] + 256 * cdb[8] + cdb[9];
size = transport_get_size(sectors, cdb, cmd);
cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
- if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV)
+ if (passthrough)
break;
+
/*
* Check to ensure that LBA + Range does not exceed past end of
* device for IBLOCK and FILEIO ->do_sync_cache() backend calls
if (transport_cmd_get_valid_sectors(cmd) < 0)
goto out_invalid_cdb_field;
}
+ cmd->execute_task = target_emulate_synchronize_cache;
break;
case UNMAP:
size = get_unaligned_be16(&cdb[7]);
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_unmap;
break;
case WRITE_SAME_16:
sectors = transport_get_sectors_16(cdb, cmd, §or_ret);
if (target_check_write_same_discard(&cdb[1], dev) < 0)
goto out_invalid_cdb_field;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_write_same;
break;
case WRITE_SAME:
sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
*/
if (target_check_write_same_discard(&cdb[1], dev) < 0)
goto out_invalid_cdb_field;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_write_same;
break;
case ALLOW_MEDIUM_REMOVAL:
- case GPCMD_CLOSE_TRACK:
case ERASE:
- case INITIALIZE_ELEMENT_STATUS:
- case GPCMD_LOAD_UNLOAD:
case REZERO_UNIT:
case SEEK_10:
- case GPCMD_SET_SPEED:
case SPACE:
case START_STOP:
case TEST_UNIT_READY:
case VERIFY:
case WRITE_FILEMARKS:
+ cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_noop;
+ break;
+ case GPCMD_CLOSE_TRACK:
+ case INITIALIZE_ELEMENT_STATUS:
+ case GPCMD_LOAD_UNLOAD:
+ case GPCMD_SET_SPEED:
case MOVE_MEDIUM:
cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
break;
cmd->data_length = size;
}
+ /* reject any command that we don't have a handler for */
+ if (!(passthrough || cmd->execute_task ||
+ (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
+ goto out_unsupported_cdb;
+
/* Let's limit control cdbs to a page, for simplicity's sake. */
if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
size > PAGE_SIZE)
projects / karo-tx-linux.git / commitdiff