--- /dev/null
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel SAMA5D3 family SoC";
+ compatible = "atmel,sama5d3", "atmel,sama5";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ gpio4 = &pioE;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a5";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mmc0: mmc@f0000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0000000 0x600>;
+ interrupts = <21 4 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi0: spi@f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9x5-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <24 4 3>;
+ cs-gpios = <&pioD 13 0
+ &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
+ &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
+ &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ status = "disabled";
+ };
+
+ ssc0: ssc@f0008000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <38 4 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
+ can0: can@f000c000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf000c000 0x300>;
+ interrupts = <40 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ status = "disabled";
+ };
+
+ tcb0: timer@f0010000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf0010000 0x100>;
+ interrupts = <26 4 0>;
+ };
+
+ i2c0: i2c@f0014000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf0014000 0x4000>;
+ interrupts = <18 4 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f0018000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf0018000 0x4000>;
+ interrupts = <19 4 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usart0: serial@f001c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf001c000 0x100>;
+ interrupts = <12 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ status = "disabled";
+ };
+
+ usart1: serial@f0020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf0020000 0x100>;
+ interrupts = <13 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
+ status = "disabled";
+ };
+
+ macb0: ethernet@f0028000 {
+ compatible = "cnds,pc302-gem", "cdns,gem";
+ reg = <0xf0028000 0x100>;
+ interrupts = <34 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+ status = "disabled";
+ };
+
+ isi: isi@f0034000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xf0034000 0x4000>;
+ interrupts = <37 4 5>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@f8000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8000000 0x600>;
+ interrupts = <22 4 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@f8004000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8004000 0x600>;
+ interrupts = <23 4 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@f8008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9x5-spi";
+ reg = <0xf8008000 0x100>;
+ interrupts = <25 4 3>;
+ cs-gpios = <&pioC 25 0
+ &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
+ &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
+ &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ status = "disabled";
+ };
+
+ ssc1: ssc@f800c000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf800c000 0x4000>;
+ interrupts = <39 4 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ status = "disabled";
+ };
+
+ can1: can@f8010000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8010000 0x300>;
+ interrupts = <41 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ };
+
+ tcb1: timer@f8014000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf8014000 0x100>;
+ interrupts = <27 4 0>;
+ };
+
+ adc0: adc@f8018000 {
+ compatible = "atmel,at91sam9260-adc";
+ reg = <0xf8018000 0x100>;
+ interrupts = <29 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7
+ &pinctrl_adc0_ad8
+ &pinctrl_adc0_ad9
+ &pinctrl_adc0_ad10
+ &pinctrl_adc0_ad11
+ >;
+ atmel,adc-channel-base = <0x50>;
+ atmel,adc-channels-used = <0xfff>;
+ atmel,adc-drdy-mask = <0x1000000>;
+ atmel,adc-num-channels = <12>;
+ atmel,adc-startup-time = <40>;
+ atmel,adc-status-register = <0x30>;
+ atmel,adc-trigger-register = <0xc0>;
+ atmel,adc-use-external;
+ atmel,adc-vref = <3000>;
+ atmel,adc-res = <10 12>;
+ atmel,adc-res-names = "lowres", "highres";
+ status = "disabled";
+
+ trigger@0 {
+ trigger-name = "external-rising";
+ trigger-value = <0x1>;
+ trigger-external;
+ };
+ trigger@1 {
+ trigger-name = "external-falling";
+ trigger-value = <0x2>;
+ trigger-external;
+ };
+ trigger@2 {
+ trigger-name = "external-any";
+ trigger-value = <0x3>;
+ trigger-external;
+ };
+ trigger@3 {
+ trigger-name = "continuous";
+ trigger-value = <0x6>;
+ };
+ };
+
+ tsadcc: tsadcc@f8018000 {
+ compatible = "atmel,at91sam9x5-tsadcc";
+ reg = <0xf8018000 0x4000>;
+ interrupts = <29 4 5>;
+ atmel,tsadcc_clock = <300000>;
+ atmel,filtering_average = <0x03>;
+ atmel,pendet_debounce = <0x08>;
+ atmel,pendet_sensitivity = <0x02>;
+ atmel,ts_sample_hold_time = <0x0a>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@f801c000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf801c000 0x4000>;
+ interrupts = <20 4 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usart2: serial@f8020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8020000 0x100>;
+ interrupts = <14 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "disabled";
+ };
+
+ usart3: serial@f8024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8024000 0x100>;
+ interrupts = <15 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ status = "disabled";
+ };
+
+ macb1: ethernet@f802c000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xf802c000 0x100>;
+ interrupts = <35 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ status = "disabled";
+ };
+
+ sha@f8034000 {
+ compatible = "atmel,sam9g46-sha";
+ reg = <0xf8034000 0x100>;
+ interrupts = <42 4 0>;
+ };
+
+ aes@f8038000 {
+ compatible = "atmel,sam9g46-aes";
+ reg = <0xf8038000 0x100>;
+ interrupts = <43 4 0>;
+ };
+
+ tdes@f803c000 {
+ compatible = "atmel,sam9g46-tdes";
+ reg = <0xf803c000 0x100>;
+ interrupts = <44 4 0>;
+ };
+
+ dma0: dma-controller@ffffe600 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffe600 0x200>;
+ interrupts = <30 4 0>;
+ #dma-cells = <1>;
+ };
+
+ dma1: dma-controller@ffffe800 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffe800 0x200>;
+ interrupts = <31 4 0>;
+ #dma-cells = <1>;
+ };
+
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <2 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "disabled";
+ };
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,sama5d3-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <47>;
+ };
+
+ pinctrl@fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */
+ 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */
+ 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */
+ 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */
+ 0xffffffff 0xbf9f8000 0x18000000 /* pioE */
+ >;
+
+ /* shared pinctrl settings */
+ adc0 {
+ pinctrl_adc0_adtrg: adc0_adtrg {
+ atmel,pins =
+ <3 19 0x1 0x0>; /* PD19 periph A ADTRG */
+ };
+ pinctrl_adc0_ad0: adc0_ad0 {
+ atmel,pins =
+ <3 20 0x1 0x0>; /* PD20 periph A AD0 */
+ };
+ pinctrl_adc0_ad1: adc0_ad1 {
+ atmel,pins =
+ <3 21 0x1 0x0>; /* PD21 periph A AD1 */
+ };
+ pinctrl_adc0_ad2: adc0_ad2 {
+ atmel,pins =
+ <3 22 0x1 0x0>; /* PD22 periph A AD2 */
+ };
+ pinctrl_adc0_ad3: adc0_ad3 {
+ atmel,pins =
+ <3 23 0x1 0x0>; /* PD23 periph A AD3 */
+ };
+ pinctrl_adc0_ad4: adc0_ad4 {
+ atmel,pins =
+ <3 24 0x1 0x0>; /* PD24 periph A AD4 */
+ };
+ pinctrl_adc0_ad5: adc0_ad5 {
+ atmel,pins =
+ <3 25 0x1 0x0>; /* PD25 periph A AD5 */
+ };
+ pinctrl_adc0_ad6: adc0_ad6 {
+ atmel,pins =
+ <3 26 0x1 0x0>; /* PD26 periph A AD6 */
+ };
+ pinctrl_adc0_ad7: adc0_ad7 {
+ atmel,pins =
+ <3 27 0x1 0x0>; /* PD27 periph A AD7 */
+ };
+ pinctrl_adc0_ad8: adc0_ad8 {
+ atmel,pins =
+ <3 28 0x1 0x0>; /* PD28 periph A AD8 */
+ };
+ pinctrl_adc0_ad9: adc0_ad9 {
+ atmel,pins =
+ <3 29 0x1 0x0>; /* PD29 periph A AD9 */
+ };
+ pinctrl_adc0_ad10: adc0_ad10 {
+ atmel,pins =
+ <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */
+ };
+ pinctrl_adc0_ad11: adc0_ad11 {
+ atmel,pins =
+ <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */
+ };
+ };
+
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+ 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */
+ 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */
+ };
+ };
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 30 0x1 0x0 /* PB30 periph A */
+ 1 31 0x1 0x1>; /* PB31 periph A with pullup */
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+ 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+ 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+ };
+ };
+
+ isi {
+ pinctrl_isi: isi-0 {
+ atmel,pins =
+ <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+ 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+ 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+ 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+ 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+ 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+ 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+ 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+ 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+ 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+ 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+ 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+ 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+ };
+ pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+ atmel,pins =
+ <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */
+ };
+ };
+
+ lcd {
+ pinctrl_lcd: lcd-0 {
+ atmel,pins =
+ <0 24 0x1 0x0 /* PA24 periph A LCDPWM */
+ 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */
+ 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */
+ 0 25 0x1 0x0 /* PA25 periph A LCDDISP */
+ 0 29 0x1 0x0 /* PA29 periph A LCDDEN */
+ 0 28 0x1 0x0 /* PA28 periph A LCDPCK */
+ 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */
+ 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */
+ 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */
+ 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */
+ 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */
+ 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */
+ 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */
+ 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */
+ 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */
+ 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */
+ 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */
+ 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */
+ 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */
+ 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */
+ 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */
+ 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */
+ 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */
+ 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */
+ 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */
+ 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */
+ 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */
+ 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */
+ 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */
+ 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */
+ 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */
+ 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */
+ 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */
+ 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */
+ 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */
+ 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */
+ 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */
+ };
+ pinctrl_macb0_data_gmii: macb0_data_gmii {
+ atmel,pins =
+ <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */
+ 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+ 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+ 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+ 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+ 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */
+ 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */
+ 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */
+ };
+ pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+ atmel,pins =
+ <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */
+ 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
+ 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
+ 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
+ 1 16 0x1 0x0 /* PB16 periph A GMDC */
+ 1 17 0x1 0x0 /* PB17 periph A GMDIO */
+ 1 18 0x1 0x0>; /* PB18 periph A G125CK */
+ };
+ pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+ atmel,pins =
+ <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
+ 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */
+ 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
+ 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */
+ 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
+ 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */
+ 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */
+ 1 16 0x1 0x0 /* PB16 periph A GMDC */
+ 1 17 0x1 0x0 /* PB17 periph A GMDIO */
+ 1 27 0x2 0x0>; /* PB27 periph B G125CKO */
+ };
+
+ };
+
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */
+ 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */
+ 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */
+ 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */
+ 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */
+ 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */
+ 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */
+ 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */
+ 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */
+ 2 9 0x1 0x0>; /* PC9 periph A EMDIO */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+ atmel,pins =
+ <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */
+ 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */
+ 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */
+ };
+ pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+ atmel,pins =
+ <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */
+ 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */
+ 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */
+ };
+ pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+ atmel,pins =
+ <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+ 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+ 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+ 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+ atmel,pins =
+ <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */
+ 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+ 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+ };
+ pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+ atmel,pins =
+ <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+ 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+ 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+ };
+ };
+
+ mmc2 {
+ pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+ atmel,pins =
+ <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */
+ 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */
+ 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */
+ };
+ pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+ atmel,pins =
+ <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+ 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+ 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+ };
+ };
+
+ nand0 {
+ pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+ atmel,pins =
+ <4 21 0x1 0x1 /* PE21 periph A with pullup */
+ 4 22 0x1 0x1>; /* PE22 periph A with pullup */
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x100>;
+ interrupts = <6 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <7 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <8 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <9 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <10 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */
+ 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */
+ 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */
+ 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */
+ 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */
+ 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */
+ 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx {
+ atmel,pins =
+ <2 16 0x1 0x0 /* PC16 periph A TK0 */
+ 2 17 0x1 0x0 /* PC17 periph A TF0 */
+ 2 18 0x1 0x0>; /* PC18 periph A TD0 */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx {
+ atmel,pins =
+ <2 19 0x1 0x0 /* PC19 periph A RK0 */
+ 2 20 0x1 0x0 /* PC20 periph A RF0 */
+ 2 21 0x1 0x0>; /* PC21 periph A RD0 */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx {
+ atmel,pins =
+ <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */
+ 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */
+ 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx {
+ atmel,pins =
+ <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */
+ 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */
+ 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+ 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+ 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <3 17 0x1 0x0 /* PD17 periph A */
+ 3 18 0x1 0x1>; /* PD18 periph A with pullup */
+ };
+
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+ atmel,pins =
+ <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+ 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <1 28 0x1 0x0 /* PB28 periph A */
+ 1 29 0x1 0x1>; /* PB29 periph A with pullup */
+ };
+
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+ atmel,pins =
+ <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */
+ 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */
+ 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */
+ };
+
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+ atmel,pins =
+ <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */
+ 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */
+ 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */
+ };
+
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+ atmel,pins =
+ <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */
+ 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x120>;
+ };
+
+ rstc@fffffe00 {
+ compatible = "atmel,at91sam9g45-rstc";
+ reg = <0xfffffe00 0x10>;
+ };
+
+ pit: timer@fffffe30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffe30 0xf>;
+ interrupts = <3 4 5>;
+ };
+
+ watchdog@fffffe40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffe40 0x10>;
+ status = "disabled";
+ };
+
+ rtc@fffffeb0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffeb0 0x30>;
+ interrupts = <1 4 7>;
+ };
+ };
+
+ usb0: gadget@00500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00500000 0x100000
+ 0xf8030000 0x4000>;
+ interrupts = <33 4 2>;
+ status = "disabled";
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep7 {
+ reg = <7>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep8 {
+ reg = <8>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep9 {
+ reg = <9>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep10 {
+ reg = <10>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep11 {
+ reg = <11>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep12 {
+ reg = <12>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep13 {
+ reg = <13>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep14 {
+ reg = <14>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep15 {
+ reg = <15>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+ };
+
+ usb1: ohci@00600000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00600000 0x100000>;
+ interrupts = <32 4 2>;
+ status = "disabled";
+ };
+
+ usb2: ehci@00700000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00700000 0x100000>;
+ interrupts = <32 4 2>;
+ status = "disabled";
+ };
+
+ nand0: nand@60000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = < 0x60000000 0x01000000 /* EBI CS3 */
+ 0xffffc070 0x00000490 /* SMC PMECC regs */
+ 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */
+ 0x00100000 0x00100000 /* ROM code */
+ 0x70000000 0x10000000 /* NFC Command Registers */
+ 0xffffc000 0x00000070 /* NFC HSMC regs */
+ 0x00200000 0x00100000 /* NFC SRAM banks */
+ >;
+ interrupts = <5 4 6>;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand0_ale_cle>;
+ atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
+ status = "disabled";
+ };
+ };
+};
projects / karo-tx-linux.git / commitdiff