source "arch/arm/plat-spear/Kconfig"
+source "arch/arm/mach-s3c24xx/Kconfig"
if ARCH_S3C24XX
-source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2416/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C24XX) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
#
# Licensed under GPLv2
-config CPU_S3C2410
- bool
- depends on ARCH_S3C24XX
- select CPU_ARM920T
- select S3C2410_CLOCK
- select CPU_LLSERIAL_S3C2410
- select S3C2410_PM if PM
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
- help
- Support for S3C2410 and S3C2410A family from the S3C24XX line
- of Samsung Mobile CPUs.
-
-config CPU_S3C2410_DMA
- bool
- depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
- default y if CPU_S3C2410 || CPU_S3C2442
- help
- DMA device selection for S3C2410 and compatible CPUs
-
-config S3C2410_PM
- bool
- help
- Power Management code common to S3C2410 and better
-
-config SIMTEC_NOR
- bool
- help
- Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
- bool
- select HAVE_PATA_PLATFORM
- help
- Internal node for machines with an BAST style IDE
- interface
-
# cpu frequency scaling support
config S3C2410_CPUFREQ
help
Select the PLL table for the S3C2410
-menu "S3C2410 Machines"
-
-config ARCH_SMDK2410
- bool "SMDK2410/A9M2410"
- select CPU_S3C2410
- select MACH_SMDK
- help
- Say Y here if you are using the SMDK2410 or the derived module A9M2410
- <http://www.fsforth.de>
-
-config ARCH_H1940
- bool "IPAQ H1940"
- select CPU_S3C2410
- select PM_H1940 if PM
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- select S3C2410_SETUP_TS
- help
- Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
- tristate "Control the state of H1940 bluetooth chip"
- depends on ARCH_H1940
- select RFKILL
- help
- This is a simple driver that is able to control
- the state of built in bluetooth chip on h1940.
-
-config PM_H1940
- bool
- help
- Internal node for H1940 and related PM
-
-config MACH_N30
- bool "Acer N30 family"
- select CPU_S3C2410
- select MACH_N35
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you want suppt for the Acer N30, Acer N35,
- Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_N35
- bool
- help
- Internal node in order to enable support for Acer N35 if Acer N30 is
- selected.
-
-config ARCH_BAST
- bool "Simtec Electronics BAST (EB2410ITX)"
- select CPU_S3C2410
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
- select PM_SIMTEC if PM
- select SIMTEC_NOR
- select MACH_BAST_IDE
- select S3C24XX_DCLK
- select ISA
- select S3C_DEV_HWMON
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Simtec Electronics EB2410ITX
- development board (also known as BAST)
-
-config MACH_OTOM
- bool "NexVision OTOM Board"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_AML_M5900
- bool "AML M5900 Series"
- select CPU_S3C2410
- select PM_SIMTEC if PM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the American Microsystems M5900 Series
- <http://www.amltd.com>
-
-config BAST_PC104_IRQ
- bool "BAST PC104 IRQ support"
- depends on ARCH_BAST
- default y
- help
- Say Y here to enable the PC104 IRQ routing on the
- Simtec BAST (EB2410ITX)
-
-config MACH_TCT_HAMMER
- bool "TCT Hammer Board"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the TinCanTools Hammer Board
- <http://www.tincantools.com>
-
-config MACH_VR1000
- bool "Thorcom VR1000"
- select PM_SIMTEC if PM
- select S3C24XX_DCLK
- select SIMTEC_NOR
- select MACH_BAST_IDE
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Thorcom VR1000 board.
-
-config MACH_QT2410
- bool "QT2410"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Armzone QT2410
-
-endmenu
obj-n :=
obj- :=
-obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
-obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
-obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
-# Machine support
-
-obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
-obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
-obj-$(CONFIG_PM_H1940) += pm-h1940.o
-obj-$(CONFIG_MACH_N30) += mach-n30.o
-obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
-obj-$(CONFIG_MACH_OTOM) += mach-otom.o
-obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
-obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
-obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
-obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
-
-# Common bits of machine support
-
-obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
-
-# machine additions
-
-obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
--- /dev/null
+# arch/arm/mach-s3c24xx/Kconfig
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+if ARCH_S3C24XX
+
+menu "SAMSUNG S3C24XX SoCs Support"
+
+comment "S3C24XX SoCs"
+
+config CPU_S3C2410
+ bool "SAMSUNG S3C2410"
+ default y
+ select CPU_ARM920T
+ select S3C2410_CLOCK
+ select CPU_LLSERIAL_S3C2410
+ select S3C2410_PM if PM
+ select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ help
+ Support for S3C2410 and S3C2410A family from the S3C24XX line
+ of Samsung Mobile CPUs.
+
+if CPU_S3C2410
+
+config S3C2410_DMA
+ bool
+ depends on S3C2410_DMA && CPU_S3C2410
+ default y if CPU_S3C2410
+ help
+ DMA device selection for S3C2410 and compatible CPUs
+
+config S3C2410_PM
+ bool
+ help
+ Power Management code common to S3C2410 and better
+
+config SIMTEC_NOR
+ bool
+ help
+ Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+ bool
+ select HAVE_PATA_PLATFORM
+ help
+ Internal node for machines with an BAST style IDE
+ interface
+
+comment "S3C2410 Boards"
+
+#
+# The "S3C2410 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_AML_M5900
+ bool "AML M5900 Series"
+ select PM_SIMTEC if PM
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the American Microsystems M5900 Series
+ <http://www.amltd.com>
+
+config ARCH_BAST
+ bool "Simtec Electronics BAST (EB2410ITX)"
+ select S3C2410_IOTIMING if S3C2410_CPUFREQ
+ select PM_SIMTEC if PM
+ select SIMTEC_NOR
+ select MACH_BAST_IDE
+ select S3C24XX_DCLK
+ select ISA
+ select S3C_DEV_HWMON
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Simtec Electronics EB2410ITX
+ development board (also known as BAST)
+
+config BAST_PC104_IRQ
+ bool "BAST PC104 IRQ support"
+ depends on ARCH_BAST
+ default y
+ help
+ Say Y here to enable the PC104 IRQ routing on the
+ Simtec BAST (EB2410ITX)
+
+config ARCH_H1940
+ bool "IPAQ H1940"
+ select PM_H1940 if PM
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ select S3C2410_SETUP_TS
+ help
+ Say Y here if you are using the HP IPAQ H1940
+
+config H1940BT
+ tristate "Control the state of H1940 bluetooth chip"
+ depends on ARCH_H1940
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on h1940.
+
+config PM_H1940
+ bool
+ help
+ Internal node for H1940 and related PM
+
+config MACH_N30
+ bool "Acer N30 family"
+ select MACH_N35
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you want suppt for the Acer N30, Acer N35,
+ Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
+
+config MACH_OTOM
+ bool "NexVision OTOM Board"
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_QT2410
+ bool "QT2410"
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Armzone QT2410
+
+config ARCH_SMDK2410
+ bool "SMDK2410/A9M2410"
+ select MACH_SMDK
+ help
+ Say Y here if you are using the SMDK2410 or the derived module A9M2410
+ <http://www.fsforth.de>
+
+config MACH_TCT_HAMMER
+ bool "TCT Hammer Board"
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the TinCanTools Hammer Board
+ <http://www.tincantools.com>
+
+config MACH_VR1000
+ bool "Thorcom VR1000"
+ select PM_SIMTEC if PM
+ select S3C24XX_DCLK
+ select SIMTEC_NOR
+ select MACH_BAST_IDE
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Thorcom VR1000 board.
+
+endif # CPU_S3C2410
+
+endmenu # SAMSUNG S3C24XX SoCs Support
+
+endif # ARCH_S3C24XX
--- /dev/null
+# arch/arm/mach-s3c24xx/Makefile
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# core
+
+obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
+obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
+
+#
+# machine support
+# following is ordered alphabetically by option text.
+#
+
+obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
+obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
+obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
+obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
+obj-$(CONFIG_PM_H1940) += pm-h1940.o
+obj-$(CONFIG_MACH_N30) += mach-n30.o
+obj-$(CONFIG_MACH_OTOM) += mach-otom.o
+obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
+obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
+obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
+obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
+
+# common bits of machine support
+
+obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
Common power management code for systems that are
compatible with the Simtec style of power management
-config S3C2410_DMA
+config S3C24XX_DMA
bool "S3C2410 DMA support"
depends on ARCH_S3C24XX
select S3C_DMA
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o
-obj-$(CONFIG_S3C2410_DMA) += dma.o
+obj-$(CONFIG_S3C24XX_DMA) += dma.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
projects / karo-tx-linux.git / commitdiff