L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T: git git://git.fluff.org/bjdooks/linux.git
+T: git git://git.pengutronix.de/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/
VERSION = 3
PATCHLEVEL = 6
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
is nothing connected to read from the DCC.
config DEBUG_SEMIHOSTING
- bool "Kernel low-level debug output via semihosting I"
+ bool "Kernel low-level debug output via semihosting I/O"
help
Semihosting enables code running on an ARM target to use
the I/O facilities on a host debugger/emulator through a
- simple SVC calls. The host debugger or emulator must have
+ simple SVC call. The host debugger or emulator must have
semihosting enabled for the special svc call to be trapped
otherwise the kernel will crash.
- This is known to work with OpenOCD, as wellas
+ This is known to work with OpenOCD, as well as
ARM's Fast Models, or any other controlling environment
that implements semihosting.
zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb:
+%.dtb: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-dtbs:
+dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
#endif
+ mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
orrne r0, r0, #1 @ MMU enabled
movne r1, #0xfffffffd @ domain 0 = client
+ bic r6, r6, #1 << 31 @ 32-bit translation system
+ bic r6, r6, #3 << 0 @ use only ttbr0
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+ mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
#endif
mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register
.size \name , . - \name
.endm
+ .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+ adds \tmp, \addr, #\size - 1
+ sbcccs \tmp, \tmp, \limit
+ bcs \bad
+#endif
+ .endm
+
#endif /* __ASM_ASSEMBLER_H__ */
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
#endif
+#endif /* __ASSEMBLY__ */
#ifndef PHYS_OFFSET
#ifdef PLAT_PHYS_OFFSET
#endif
#endif
+#ifndef __ASSEMBLY__
+
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
{
pgtable_page_dtor(pte);
+#ifdef CONFIG_ARM_LPAE
+ tlb_add_flush(tlb, addr);
+#else
/*
* With the classic ARM MMU, a pte page has two corresponding pmd
* entries, each covering 1MB.
addr &= PMD_MASK;
tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
tlb_add_flush(tlb, addr + SZ_1M);
+#endif
tlb_remove_page(tlb, pte);
}
extern int __get_user_2(void *);
extern int __get_user_4(void *);
-#define __get_user_x(__r2,__p,__e,__s,__i...) \
+#define __GUP_CLOBBER_1 "lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2 "ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4 "lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%1", "r2") \
+ __asmeq("%3", "r1") \
"bl __get_user_" #__s \
: "=&r" (__e), "=r" (__r2) \
- : "0" (__p) \
- : __i, "cc")
+ : "0" (__p), "r" (__l) \
+ : __GUP_CLOBBER_##__s)
-#define get_user(x,p) \
+#define __get_user_check(x,p) \
({ \
+ unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
register unsigned long __r2 asm("r2"); \
+ register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
- __get_user_x(__r2, __p, __e, 1, "lr"); \
- break; \
+ __get_user_x(__r2, __p, __e, __l, 1); \
+ break; \
case 2: \
- __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \
+ __get_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
- __get_user_x(__r2, __p, __e, 4, "lr"); \
+ __get_user_x(__r2, __p, __e, __l, 4); \
break; \
default: __e = __get_user_bad(); break; \
} \
__e; \
})
+#define get_user(x,p) \
+ ({ \
+ might_fault(); \
+ __get_user_check(x,p); \
+ })
+
extern int __put_user_1(void *, unsigned int);
extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
-#define __put_user_x(__r2,__p,__e,__s) \
+#define __put_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
+ __asmeq("%3", "r1") \
"bl __put_user_" #__s \
: "=&r" (__e) \
- : "0" (__p), "r" (__r2) \
+ : "0" (__p), "r" (__r2), "r" (__l) \
: "ip", "lr", "cc")
-#define put_user(x,p) \
+#define __put_user_check(x,p) \
({ \
+ unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __r2 asm("r2") = (x); \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
+ register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
- __put_user_x(__r2, __p, __e, 1); \
+ __put_user_x(__r2, __p, __e, __l, 1); \
break; \
case 2: \
- __put_user_x(__r2, __p, __e, 2); \
+ __put_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
- __put_user_x(__r2, __p, __e, 4); \
+ __put_user_x(__r2, __p, __e, __l, 4); \
break; \
case 8: \
- __put_user_x(__r2, __p, __e, 8); \
+ __put_user_x(__r2, __p, __e, __l, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
+#define put_user(x,p) \
+ ({ \
+ might_fault(); \
+ __put_user_check(x,p); \
+ })
+
#else /* CONFIG_MMU */
/*
unsigned long __gu_addr = (unsigned long)(ptr); \
unsigned long __gu_val; \
__chk_user_ptr(ptr); \
+ might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
unsigned long __pu_addr = (unsigned long)(ptr); \
__typeof__(*(ptr)) __pu_val = (x); \
__chk_user_ptr(ptr); \
+ might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \
arch >= ARM_DEBUG_ARCH_V7_1;
}
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+ return 0;
+}
+
/* Determine number of WRP registers available. */
static int get_num_wrp_resources(void)
{
/* Aligned */
break;
case 1:
- /* Allow single byte watchpoint. */
- if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
- break;
case 2:
/* Allow halfword watchpoints and breakpoints. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
+ case 3:
+ /* Allow single byte watchpoint. */
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+ break;
default:
ret = -EINVAL;
goto out;
info->address &= ~alignment_mask;
info->ctrl.len <<= offset;
- /*
- * Currently we rely on an overflow handler to take
- * care of single-stepping the breakpoint when it fires.
- * In the case of userspace breakpoints on a core with V7 debug,
- * we can use the mismatch feature as a poor-man's hardware
- * single-step, but this only works for per-task breakpoints.
- */
- if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
- !core_has_mismatch_brps() || !bp->hw.bp_target)) {
- pr_warning("overflow handler required but none found\n");
- ret = -EINVAL;
+ if (!bp->overflow_handler) {
+ /*
+ * Mismatch breakpoints are required for single-stepping
+ * breakpoints.
+ */
+ if (!core_has_mismatch_brps())
+ return -EINVAL;
+
+ /* We don't allow mismatch breakpoints in kernel space. */
+ if (arch_check_bp_in_kernelspace(bp))
+ return -EPERM;
+
+ /*
+ * Per-cpu breakpoints are not supported by our stepping
+ * mechanism.
+ */
+ if (!bp->hw.bp_target)
+ return -EINVAL;
+
+ /*
+ * We only support specific access types if the fsr
+ * reports them.
+ */
+ if (!debug_exception_updates_fsr() &&
+ (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+ info->ctrl.type == ARM_BREAKPOINT_STORE))
+ return -EINVAL;
}
+
out:
return ret;
}
goto unlock;
/* Check that the access type matches. */
- access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
- HW_BREAKPOINT_R;
- if (!(access & hw_breakpoint_type(wp)))
- goto unlock;
+ if (debug_exception_updates_fsr()) {
+ access = (fsr & ARM_FSR_ACCESS_MASK) ?
+ HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+ if (!(access & hw_breakpoint_type(wp)))
+ goto unlock;
+ }
/* We have a winner. */
info->trigger = addr;
#endif
instr = *(u32 *) pc;
} else if (thumb_mode(regs)) {
- get_user(instr, (u16 __user *)pc);
+ if (get_user(instr, (u16 __user *)pc))
+ goto die_sig;
if (is_wide_instruction(instr)) {
unsigned int instr2;
- get_user(instr2, (u16 __user *)pc+1);
+ if (get_user(instr2, (u16 __user *)pc+1))
+ goto die_sig;
instr <<= 16;
instr |= instr2;
}
- } else {
- get_user(instr, (u32 __user *)pc);
+ } else if (get_user(instr, (u32 __user *)pc)) {
+ goto die_sig;
}
if (call_undef_hook(regs, instr) == 0)
return;
+die_sig:
#ifdef CONFIG_DEBUG_USER
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
{
pr_info("Switching to timer-based delay loop\n");
lpj_fine = freq / HZ;
+ loops_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
* __get_user_X
*
* Inputs: r0 contains the address
+ * r1 contains the address limit, which must be preserved
* Outputs: r0 is the error code
- * r2, r3 contains the zero-extended value
+ * r2 contains the zero-extended value
* lr corrupted
*
* No other registers must be altered. (see <asm/uaccess.h>
* Note also that it is intended that __get_user_bad is not global.
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__get_user_1)
+ check_uaccess r0, 1, r1, r2, __get_user_bad
1: TUSER(ldrb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
-#ifdef CONFIG_THUMB2_KERNEL
-2: TUSER(ldrb) r2, [r0]
-3: TUSER(ldrb) r3, [r0, #1]
+ check_uaccess r0, 2, r1, r2, __get_user_bad
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb .req ip
+2: ldrbt r2, [r0], #1
+3: ldrbt rb, [r0], #0
#else
-2: TUSER(ldrb) r2, [r0], #1
-3: TUSER(ldrb) r3, [r0]
+rb .req r0
+2: ldrb r2, [r0]
+3: ldrb rb, [r0, #1]
#endif
#ifndef __ARMEB__
- orr r2, r2, r3, lsl #8
+ orr r2, r2, rb, lsl #8
#else
- orr r2, r3, r2, lsl #8
+ orr r2, rb, r2, lsl #8
#endif
mov r0, #0
mov pc, lr
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
+ check_uaccess r0, 4, r1, r2, __get_user_bad
4: TUSER(ldr) r2, [r0]
mov r0, #0
mov pc, lr
* __put_user_X
*
* Inputs: r0 contains the address
+ * r1 contains the address limit, which must be preserved
* r2, r3 contains the value
* Outputs: r0 is the error code
* lr corrupted
* Note also that it is intended that __put_user_bad is not global.
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__put_user_1)
+ check_uaccess r0, 1, r1, ip, __put_user_bad
1: TUSER(strb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_1)
ENTRY(__put_user_2)
+ check_uaccess r0, 2, r1, ip, __put_user_bad
mov ip, r2, lsr #8
#ifdef CONFIG_THUMB2_KERNEL
#ifndef __ARMEB__
ENDPROC(__put_user_2)
ENTRY(__put_user_4)
+ check_uaccess r0, 4, r1, ip, __put_user_bad
4: TUSER(str) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
+ check_uaccess r0, 8, r1, ip, __put_user_bad
#ifdef CONFIG_THUMB2_KERNEL
5: TUSER(str) r2, [r0]
6: TUSER(str) r3, [r0, #4]
clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
- clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
- clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
- clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
- clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
- clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
/* i.mx35 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
-config MACH_OMAP3_TOUCHBOOK
+config MACH_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
+obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX),
- CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX),
- CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX),
- CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX),
- CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX),
- CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX),
- CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX),
- CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX),
+ CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX),
+ CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX),
+ CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
+ CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX),
+ CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX),
+ CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX),
+ CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX),
CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX),
CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX),
_clkdm_del_autodeps(clkdm);
}
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ _disable_hwsup(clkdm);
+ _clkdm_add_autodeps(clkdm);
+ _enable_hwsup(clkdm);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap3_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ _disable_hwsup(clkdm);
+ _clkdm_del_autodeps(clkdm);
+ _enable_hwsup(clkdm);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap3_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
struct clkdm_ops omap2_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_wakeup = omap3_clkdm_wakeup,
.clkdm_allow_idle = omap3_clkdm_allow_idle,
.clkdm_deny_idle = omap3_clkdm_deny_idle,
- .clkdm_clk_enable = omap2_clkdm_clk_enable,
- .clkdm_clk_disable = omap2_clkdm_clk_disable,
+ .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
};
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
/* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_MASK (1 << 0)
/* CM_IDLEST_PLL_IVA2 */
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_SPINLOCK(wakeupgen_lock);
-static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_target_cpu[MAX_IRQS];
static unsigned int irq_banks = MAX_NR_REG_BANKS;
static unsigned int max_irqs = MAX_IRQS;
static unsigned int omap_secure_apis;
_enable_sysc(oh);
}
} else {
+ _omap4_disable_module(oh);
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
oh->name, r);
/* IVA2 (IVA2) */
static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
- { .name = "logic", .rst_shift = 0 },
- { .name = "seq0", .rst_shift = 1 },
- { .name = "seq1", .rst_shift = 2 },
+ { .name = "logic", .rst_shift = 0, .st_shift = 8 },
+ { .name = "seq0", .rst_shift = 1, .st_shift = 9 },
+ { .name = "seq1", .rst_shift = 2, .st_shift = 10 },
};
static struct omap_hwmod omap3xxx_iva_hwmod = {
.rst_lines = omap3xxx_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets),
.main_clk = "iva2_ck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = OMAP3430_IVA2_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
+ }
+ },
};
/* timer class */
};
/* dsp -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
.master = &omap44xx_dsp_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
};
/* iva -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = {
.master = &omap44xx_iva_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
};
/* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "l3_div_ck",
&omap44xx_l4_abe__dmic,
&omap44xx_l4_abe__dmic_dma,
&omap44xx_dsp__iva,
- &omap44xx_dsp__sl2if,
+ /* &omap44xx_dsp__sl2if, */
&omap44xx_l4_cfg__dsp,
&omap44xx_l3_main_2__dss,
&omap44xx_l4_per__dss,
&omap44xx_l4_per__i2c4,
&omap44xx_l3_main_2__ipu,
&omap44xx_l3_main_2__iss,
- &omap44xx_iva__sl2if,
+ /* &omap44xx_iva__sl2if, */
&omap44xx_l3_main_2__iva,
&omap44xx_l4_wkup__kbd,
&omap44xx_l4_cfg__mailbox,
&omap44xx_l4_cfg__cm_core,
&omap44xx_l4_wkup__prm,
&omap44xx_l4_wkup__scrm,
- &omap44xx_l3_main_2__sl2if,
+ /* &omap44xx_l3_main_2__sl2if, */
&omap44xx_l4_abe__slimbus1,
&omap44xx_l4_abe__slimbus1_dma,
&omap44xx_l4_per__slimbus2,
return 0;
}
+#ifdef CONFIG_OMAP_32K_TIMER
/* Setup free-running counter for clocksource */
static int __init omap2_sync32k_clocksource_init(void)
{
return ret;
}
+#else
+static inline int omap2_sync32k_clocksource_init(void)
+{
+ return -ENODEV;
+}
+#endif
static void __init omap2_gptimer_clocksource_init(int gptimer_id,
const char *fck_source)
pid = task_pid_nr(thread->task) << ASID_BITS;
asm volatile(
" mrc p15, 0, %0, c13, c0, 1\n"
- " bfi %1, %0, #0, %2\n"
- " mcr p15, 0, %1, c13, c0, 1\n"
+ " and %0, %0, %2\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c13, c0, 1\n"
: "=r" (contextidr), "+r" (pid)
- : "I" (ASID_BITS));
+ : "I" (~ASID_MASK));
isb();
return NOTIFY_OK;
void *pool_start = pool->vaddr;
void *pool_end = pool->vaddr + pool->size;
- if (start < pool_start || start > pool_end)
+ if (start < pool_start || start >= pool_end)
return false;
if (end <= pool_end)
/* permanent static mappings from iotable_init() */
#define VM_ARM_STATIC_MAPPING 0x40000000
+/* empty mapping */
+#define VM_ARM_EMPTY_MAPPING 0x20000000
+
/* mapping type (attributes) for permanent static mappings */
#define VM_ARM_MTYPE(mt) ((mt) << 20)
#define VM_ARM_MTYPE_MASK (0x1f << 20)
vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
vm->addr = (void *)addr;
vm->size = SECTION_SIZE;
- vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
vm->caller = pmd_empty_section_gap;
vm_area_add_early(vm);
}
/* we're still single threaded hence no lock needed here */
for (vm = vmlist; vm; vm = vm->next) {
- if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
continue;
addr = (unsigned long)vm->addr;
if (addr < next)
* Check whether this memory bank would partially overlap
* the vmalloc area.
*/
- if (__va(bank->start + bank->size) > vmalloc_min ||
- __va(bank->start + bank->size) < __va(bank->start)) {
+ if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
+ __va(bank->start + bank->size - 1) <= __va(bank->start)) {
unsigned long newsize = vmalloc_min - __va(bank->start);
printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
"to -%.8llx (vmalloc region overlap).\n",
static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
*/
static void __init omap_detect_sram(void)
{
+ omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
+ omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
return;
#ifdef CONFIG_OMAP4_ERRATA_I688
+ if (cpu_is_omap44xx()) {
omap_sram_start += PAGE_SIZE;
omap_sram_size -= SZ_16K;
+ }
#endif
if (cpu_is_omap34xx()) {
/*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
- memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
+ memset_io(omap_sram_base + omap_sram_skip, 0,
+ omap_sram_size - omap_sram_skip);
}
/*
{
unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
- available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+ available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
if (size > available) {
pr_err("Not enough space in SRAM\n");
if (*offset)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val < oprofile_min_interval)
oprofile_hw_interval = oprofile_min_interval;
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0)
return -EINVAL;
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
break;
case 28: /* Atom */
+ case 54: /* Cedariew */
memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
* to have an operational LBR which can freeze
* on PMU interrupt
*/
- if (boot_cpu_data.x86_mask < 10) {
+ if (boot_cpu_data.x86_model == 28
+ && boot_cpu_data.x86_mask < 10) {
pr_cont("LBR disabled due to erratum");
return;
}
if (do_microcode_update(buf, len) == 0)
ret = (ssize_t)len;
+ if (ret > 0)
+ perf_check_microcode();
+
mutex_unlock(µcode_mutex);
put_online_cpus();
} else if (result == ACPI_STATE_D3_HOT) {
result = ACPI_STATE_D3;
}
+
+ /*
+ * If we were unsure about the device parent's power state up to this
+ * point, the fact that the device is in D0 implies that the parent has
+ * to be in D0 too.
+ */
+ if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN
+ && result == ACPI_STATE_D0)
+ device->parent->power.state = ACPI_STATE_D0;
+
*state = result;
out:
/* List of devices relying on this power resource */
struct acpi_power_resource_device *devices;
+ struct mutex devices_lock;
};
static struct list_head acpi_power_resource_list;
static int __acpi_power_on(struct acpi_power_resource *resource)
{
- struct acpi_power_resource_device *device_list = resource->devices;
acpi_status status = AE_OK;
status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n",
resource->name));
- while (device_list) {
- acpi_power_on_device(device_list->device);
-
- device_list = device_list->next;
- }
-
return 0;
}
static int acpi_power_on(acpi_handle handle)
{
int result = 0;
+ bool resume_device = false;
struct acpi_power_resource *resource = NULL;
+ struct acpi_power_resource_device *device_list;
result = acpi_power_get_context(handle, &resource);
if (result)
result = __acpi_power_on(resource);
if (result)
resource->ref_count--;
+ else
+ resume_device = true;
}
mutex_unlock(&resource->resource_lock);
+ if (!resume_device)
+ return result;
+
+ mutex_lock(&resource->devices_lock);
+
+ device_list = resource->devices;
+ while (device_list) {
+ acpi_power_on_device(device_list->device);
+ device_list = device_list->next;
+ }
+
+ mutex_unlock(&resource->devices_lock);
+
return result;
}
if (acpi_power_get_context(res_handle, &resource))
return;
- mutex_lock(&resource->resource_lock);
+ mutex_lock(&resource->devices_lock);
prev = NULL;
curr = resource->devices;
while (curr) {
prev = curr;
curr = curr->next;
}
- mutex_unlock(&resource->resource_lock);
+ mutex_unlock(&resource->devices_lock);
}
/* Unlink dev from all power resources in _PR0 */
power_resource_device->device = powered_device;
- mutex_lock(&resource->resource_lock);
+ mutex_lock(&resource->devices_lock);
power_resource_device->next = resource->devices;
resource->devices = power_resource_device;
- mutex_unlock(&resource->resource_lock);
+ mutex_unlock(&resource->devices_lock);
return 0;
}
return ret;
no_power_resource:
- printk(KERN_WARNING PREFIX "Invalid Power Resource to register!");
+ printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!");
return -ENODEV;
}
EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
resource->device = device;
mutex_init(&resource->resource_lock);
+ mutex_init(&resource->devices_lock);
strcpy(resource->name, device->pnp.bus_id);
strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+ /* JMicron 362B and 362C have an AHCI function with IDE class code */
+ { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
+ { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
{ PCI_DEVICE(0x1b4b, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
+ { PCI_DEVICE(0x1b4b, 0x9192),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(0x1b4b, 0x91a3),
.driver_data = board_ahci_yes_fbs },
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
/* Asmedia */
- { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */
+ { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */
+ { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */
+ { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */
+ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C) },
+ { USB_DEVICE(0x0489, 0xE036) },
{ } /* Terminating entry */
};
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+ /* Apple-specific (Broadcom) devices */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0489, 0xe042) },
- { USB_DEVICE(0x0a5c, 0x21e3) },
- { USB_DEVICE(0x0a5c, 0x21e6) },
- { USB_DEVICE(0x0a5c, 0x21e8) },
- { USB_DEVICE(0x0a5c, 0x21f3) },
- { USB_DEVICE(0x0a5c, 0x21f4) },
{ USB_DEVICE(0x413c, 0x8197) },
/* Foxconn - Hon Hai */
{ USB_DEVICE(0x0489, 0xe033) },
+ /*Broadcom devices with vendor specific id */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
+
{ } /* Terminating entry */
};
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
}
info->dev = &pdev->dev;
info->max77693 = max77693;
- info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic,
- &max77693_muic_regmap_config);
- if (IS_ERR(info->max77693->regmap_muic)) {
- ret = PTR_ERR(info->max77693->regmap_muic);
- dev_err(max77693->dev,
- "failed to allocate register map: %d\n", ret);
- goto err_regmap;
+ if (info->max77693->regmap_muic)
+ dev_dbg(&pdev->dev, "allocate register map\n");
+ else {
+ info->max77693->regmap_muic = devm_regmap_init_i2c(
+ info->max77693->muic,
+ &max77693_muic_regmap_config);
+ if (IS_ERR(info->max77693->regmap_muic)) {
+ ret = PTR_ERR(info->max77693->regmap_muic);
+ dev_err(max77693->dev,
+ "failed to allocate register map: %d\n", ret);
+ goto err_regmap;
+ }
}
platform_set_drvdata(pdev, info);
mutex_init(&info->mutex);
u16 regs[INA2XX_MAX_REGISTERS];
};
-int ina2xx_read_word(struct i2c_client *client, int reg)
-{
- int val = i2c_smbus_read_word_data(client, reg);
- if (unlikely(val < 0)) {
- dev_dbg(&client->dev,
- "Failed to read register: %d\n", reg);
- return val;
- }
- return be16_to_cpu(val);
-}
-
-void ina2xx_write_word(struct i2c_client *client, int reg, int data)
-{
- i2c_smbus_write_word_data(client, reg, cpu_to_be16(data));
-}
-
static struct ina2xx_data *ina2xx_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
/* Read all registers */
for (i = 0; i < data->registers; i++) {
- int rv = ina2xx_read_word(client, i);
+ int rv = i2c_smbus_read_word_swapped(client, i);
if (rv < 0) {
ret = ERR_PTR(rv);
goto abort;
switch (data->kind) {
case ina219:
/* device configuration */
- ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT);
+ i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ INA219_CONFIG_DEFAULT);
/* set current LSB to 1mA, shunt is in uOhms */
/* (equation 13 in datasheet) */
- ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt);
+ i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ 40960000 / shunt);
dev_info(&client->dev,
"power monitor INA219 (Rshunt = %li uOhm)\n", shunt);
data->registers = INA219_REGISTERS;
break;
case ina226:
/* device configuration */
- ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT);
+ i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ INA226_CONFIG_DEFAULT);
/* set current LSB to 1mA, shunt is in uOhms */
/* (equation 1 in datasheet)*/
- ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt);
+ i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ 5120000 / shunt);
dev_info(&client->dev,
"power monitor INA226 (Rshunt = %li uOhm)\n", shunt);
data->registers = INA226_REGISTERS;
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct twl4030_madc_request req;
+ struct twl4030_madc_request req = {
+ .channels = 1 << attr->index,
+ .method = TWL4030_MADC_SW2,
+ .type = TWL4030_MADC_WAIT,
+ };
long val;
- req.channels = (1 << attr->index);
- req.method = TWL4030_MADC_SW2;
- req.func_cb = NULL;
val = twl4030_madc_conversion(&req);
if (val < 0)
return val;
/* To avoid integer overflow, use clock/100 for calculations */
clock = pca_clock(pca_data) / 100;
- if (pca_data->i2c_clock > 10000) {
+ if (pca_data->i2c_clock > 1000000) {
mode = I2C_PCA_MODE_TURBO;
min_tlow = 14;
min_thi = 5;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 4000) {
+ } else if (pca_data->i2c_clock > 400000) {
mode = I2C_PCA_MODE_FASTP;
min_tlow = 17;
min_thi = 9;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 1000) {
+ } else if (pca_data->i2c_clock > 100000) {
mode = I2C_PCA_MODE_FAST;
min_tlow = 44;
min_thi = 20;
struct device_node *node = dev->of_node;
int ret;
- if (!node)
- return -EINVAL;
-
- i2c->speed = &mxs_i2c_95kHz_config;
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret)
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
return err;
i2c->dev = dev;
+ i2c->speed = &mxs_i2c_95kHz_config;
- err = mxs_i2c_get_ofdata(i2c);
- if (err)
- return err;
+ if (dev->of_node) {
+ err = mxs_i2c_get_ofdata(i2c);
+ if (err)
+ return err;
+ }
platform_set_drvdata(pdev, i2c);
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
+ mcntrl_drsie = 0x00000010,
+ mcntrl_rffie = 0x00000020,
+ mcntrl_daie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
- dev_dbg(&alg_data->adapter.dev,
- "%s(): Write dummy data to fill Rx-fifo...\n",
- __func__);
+ /* 'Asking' is done asynchronously, e.g. dummy TX of several
+ * bytes is done before the first actual RX arrives in FIFO.
+ * Therefore, ordered bytes (via TX) are counted separately.
+ */
+ if (alg_data->mif.order) {
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Write dummy data to fill Rx-fifo...\n",
+ __func__);
- if (alg_data->mif.len == 1) {
- /* Last byte, do not acknowledge next rcv. */
- val |= stop_bit;
+ if (alg_data->mif.order == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
/*
- * Enable interrupt RFDAIE (data in Rx fifo),
- * and disable DRMIE (need data for Tx)
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
*/
- ctl = ioread32(I2C_REG_CTL(alg_data));
- ctl |= mcntrl_rffie | mcntrl_daie;
- ctl &= ~mcntrl_drmie;
- iowrite32(ctl, I2C_REG_CTL(alg_data));
+ iowrite32(val, I2C_REG_TX(alg_data));
+ alg_data->mif.order--;
}
-
- /*
- * Now we'll 'ask' for data:
- * For each byte we want to receive, we must
- * write a (dummy) byte to the Tx-FIFO.
- */
- iowrite32(val, I2C_REG_TX(alg_data));
-
return 0;
}
alg_data->mif.buf = pmsg->buf;
alg_data->mif.len = pmsg->len;
+ alg_data->mif.order = pmsg->len;
alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
I2C_SMBUS_READ : I2C_SMBUS_WRITE;
alg_data->mif.ret = 0;
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
+ alg_data->mif.order = 0;
dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
st->adc_clk = clk_get(&pdev->dev, "adc_op_clk");
if (IS_ERR(st->adc_clk)) {
dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
- ret = PTR_ERR(st->clk);
+ ret = PTR_ERR(st->adc_clk);
goto error_disable_clk;
}
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&fc->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
modehdlc(bch, ISDN_P_NONE);
spin_unlock_irqrestore(&fc->lock, flags);
ch->protocol = ISDN_P_NONE;
printk(KERN_INFO
"HFC-E1 #%d has overlapping B-channels on fragment #%d\n",
E1_cnt + 1, pt);
+ kfree(hc);
return -EINVAL;
}
maskcheck |= hc->bmask[pt];
if ((poll >> 1) > sizeof(hc->silence_data)) {
printk(KERN_ERR "HFCMULTI error: silence_data too small, "
"please fix\n");
+ kfree(hc);
return -EINVAL;
}
for (i = 0; i < (poll >> 1); i++)
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(hx->ip->hwlock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
hscx_mode(hx, ISDN_P_NONE);
spin_unlock_irqrestore(hx->ip->hwlock, flags);
ch->protocol = ISDN_P_NONE;
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(ich->is->hwlock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
modeisar(ich, ISDN_P_NONE);
spin_unlock_irqrestore(ich->is->hwlock, flags);
ch->protocol = ISDN_P_NONE;
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&card->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
mode_tiger(bc, ISDN_P_NONE);
spin_unlock_irqrestore(&card->lock, flags);
ch->protocol = ISDN_P_NONE;
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&card->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
w6692_mode(bc, ISDN_P_NONE);
spin_unlock_irqrestore(&card->lock, flags);
ch->protocol = ISDN_P_NONE;
ch->next_minlen = ch->init_minlen;
ch->maxlen = ch->init_maxlen;
ch->next_maxlen = ch->init_maxlen;
+ skb_queue_purge(&ch->rqueue);
+ ch->rcount = 0;
}
EXPORT_SYMBOL(mISDN_clear_bchannel);
-int
+void
mISDN_freebchannel(struct bchannel *ch)
{
+ cancel_work_sync(&ch->workq);
mISDN_clear_bchannel(ch);
- skb_queue_purge(&ch->rqueue);
- ch->rcount = 0;
- flush_work_sync(&ch->workq);
- return 0;
}
EXPORT_SYMBOL(mISDN_freebchannel);
ret =
mfd_add_devices(chip->dev, 0, &onkey_devs[0],
- ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0);
+ ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
+ NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
goto out_dev;
rtc_devs[0].platform_data = pdata->rtc;
rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata);
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
- ARRAY_SIZE(rtc_devs), NULL, 0);
+ ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out_dev;
}
ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
- ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
+ ARRAY_SIZE(codec_devs), &codec_resources[0], 0,
+ NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add codec subdev\n");
goto out_codec;
bk_devs[i].resources = &bk_resources[j];
ret = mfd_add_devices(chip->dev, 0,
&bk_devs[i], 1,
- &bk_resources[j], 0);
+ &bk_resources[j], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add "
"backlight subdev\n");
led_devs[i].resources = &led_resources[j],
ret = mfd_add_devices(chip->dev, 0,
&led_devs[i], 1,
- &led_resources[j], 0);
+ &led_resources[j], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add "
"led subdev\n");
regulator_devs[i].resources = ®ulator_resources[seq];
ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[i], 1,
- ®ulator_resources[seq], 0);
+ ®ulator_resources[seq], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add regulator subdev\n");
goto out;
rtc_devs[0].resources = &rtc_resources[0];
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
ARRAY_SIZE(rtc_devs), &rtc_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add rtc subdev\n");
}
touch_devs[0].resources = &touch_resources[0];
ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
ARRAY_SIZE(touch_devs), &touch_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add touch subdev\n");
}
power_devs[0].num_resources = ARRAY_SIZE(battery_resources);
power_devs[0].resources = &battery_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[0], 1,
- &battery_resources[0], chip->irq_base);
+ &battery_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add battery subdev\n");
power_devs[1].num_resources = ARRAY_SIZE(charger_resources);
power_devs[1].resources = &charger_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[1], 1,
- &charger_resources[0], chip->irq_base);
+ &charger_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add charger subdev\n");
power_devs[2].num_resources = ARRAY_SIZE(preg_resources);
power_devs[2].resources = &preg_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[2], 1,
- &preg_resources[0], chip->irq_base);
+ &preg_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add preg subdev\n");
}
onkey_devs[0].resources = &onkey_resources[0],
ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
ARRAY_SIZE(onkey_devs), &onkey_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add onkey subdev\n");
}
codec_devs[0].num_resources = ARRAY_SIZE(codec_resources);
codec_devs[0].resources = &codec_resources[0],
ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
- ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
+ ARRAY_SIZE(codec_devs), &codec_resources[0], 0,
+ NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add codec subdev\n");
}
}
ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
- ARRAY_SIZE(aat2870_devs), NULL, 0);
+ ARRAY_SIZE(aat2870_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
goto out_disable;
}
err = mfd_add_devices(&client->dev, 0, ab3100_devs,
- ARRAY_SIZE(ab3100_devs), NULL, 0);
+ ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
ab3100_setup_debugfs(ab3100);
ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs,
ARRAY_SIZE(abx500_common_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
if (is_ab9540(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
ARRAY_SIZE(ab9540_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
else
ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
if (is_ab9540(ab8500) || is_ab8505(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs,
ARRAY_SIZE(ab9540_ab8505_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
/* Add battery management devices */
ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
ARRAY_SIZE(ab8500_bm_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
dev_err(ab8500->dev, "error adding bm devices\n");
}
}
ret = mfd_add_devices(arizona->dev, -1, early_devs,
- ARRAY_SIZE(early_devs), NULL, 0);
+ ARRAY_SIZE(early_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(dev, "Failed to add early children: %d\n", ret);
return ret;
switch (arizona->type) {
case WM5102:
ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
- ARRAY_SIZE(wm5102_devs), NULL, 0);
+ ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
case WM5110:
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
- ARRAY_SIZE(wm5102_devs), NULL, 0);
+ ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
}
if (pdata->clock_rate) {
ds1wm_pdata.clock_rate = pdata->clock_rate;
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &asic3_cell_ds1wm, 1, mem, asic->irq_base);
+ &asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
if (ret < 0)
goto out;
}
if (mem_sdio && (irq >= 0)) {
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &asic3_cell_mmc, 1, mem_sdio, irq);
+ &asic3_cell_mmc, 1, mem_sdio, irq, NULL);
if (ret < 0)
goto out;
}
asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]);
}
ret = mfd_add_devices(&pdev->dev, 0,
- asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0);
+ asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
}
out:
}
err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells,
- ARRAY_SIZE(cs5535_mfd_cells), NULL, 0);
+ ARRAY_SIZE(cs5535_mfd_cells), NULL, 0, NULL);
if (err) {
dev_err(&pdev->dev, "MFD add devices failed: %d\n", err);
goto err_disable;
dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret);
ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info,
- ARRAY_SIZE(da9052_subdev_info), NULL, 0);
+ ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL);
if (ret)
goto err;
cell->pdata_size = sizeof(*davinci_vc);
ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells,
- DAVINCI_VC_CELLS, NULL, 0);
+ DAVINCI_VC_CELLS, NULL, 0, NULL);
if (ret != 0) {
dev_err(&pdev->dev, "fail to register client devices\n");
goto fail4;
prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
- ARRAY_SIZE(db8500_prcmu_devs), NULL, 0);
+ ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL);
if (err) {
pr_err("prcmu: Failed to add subdevices\n");
return err;
/* the first 5 PASIC3 registers control the DS1WM */
ds1wm_resources[0].end = (5 << asic->bus_shift) - 1;
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &ds1wm_cell, 1, r, irq);
+ &ds1wm_cell, 1, r, irq, NULL);
if (ret < 0)
dev_warn(dev, "failed to register DS1WM\n");
}
if (pdata && pdata->led_pdata) {
led_cell.platform_data = pdata->led_pdata;
led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo);
- ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, 0);
+ ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r,
+ 0, NULL);
if (ret < 0)
dev_warn(dev, "failed to register LED device\n");
}
continue;
ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
- pdata->irq[i]);
+ pdata->irq[i], NULL);
if (ret)
goto fail;
}
ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
- ARRAY_SIZE(msic_other_devs), NULL, 0);
+ ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
if (ret)
goto fail;
}
return mfd_add_devices(&pdev->dev, 0, priv->cells,
- num_probed, NULL, pdev->irq);
+ num_probed, NULL, pdev->irq, NULL);
}
/*
writeb(0xff, adc->base + JZ_REG_ADC_CTRL);
ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells,
- ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base);
+ ARRAY_SIZE(jz4740_adc_cells), mem_base,
+ irq_base, NULL);
if (ret < 0)
goto err_clk_put;
lm3533_als_devs[0].platform_data = pdata->als;
lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
- ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, 0);
+ ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
+ 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add ALS device\n");
return ret;
}
ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
- pdata->num_backlights, NULL, 0);
+ pdata->num_backlights, NULL, 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add backlight devices\n");
return ret;
}
ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
- pdata->num_leds, NULL, 0);
+ pdata->num_leds, NULL, 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add LED devices\n");
return ret;
lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id);
ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO],
- 1, NULL, 0);
+ 1, NULL, 0, NULL);
gpio_done:
if (acpi_conflict)
u32 base_addr_cfg;
u32 base_addr;
int ret;
- bool acpi_conflict = false;
struct resource *res;
/* Setup power management base register */
res = wdt_io_res(ICH_RES_IO_TCO);
res->start = base_addr + ACPIBASE_TCO_OFF;
res->end = base_addr + ACPIBASE_TCO_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
res = wdt_io_res(ICH_RES_IO_SMI);
res->start = base_addr + ACPIBASE_SMI_OFF;
res->end = base_addr + ACPIBASE_SMI_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
+
lpc_ich_enable_acpi_space(dev);
/*
res = wdt_mem_res(ICH_RES_MEM_GCS);
res->start = base_addr + ACPIBASE_GCS_OFF;
res->end = base_addr + ACPIBASE_GCS_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
}
lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id);
ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT],
- 1, NULL, 0);
+ 1, NULL, 0, NULL);
wdt_done:
- if (acpi_conflict)
- pr_warn("Resource conflict(s) found affecting %s\n",
- lpc_ich_cells[LPC_WDT].name);
return ret;
}
lpc_sch_cells[i].id = id->device;
ret = mfd_add_devices(&dev->dev, 0,
- lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0);
+ lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL,
+ 0, NULL);
if (ret)
goto out_dev;
tunnelcreek_cells[i].id = id->device;
ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells,
- ARRAY_SIZE(tunnelcreek_cells), NULL, 0);
+ ARRAY_SIZE(tunnelcreek_cells), NULL,
+ 0, NULL);
}
return ret;
max77686_irq_init(max77686);
ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
- ARRAY_SIZE(max77686_devs), NULL, 0);
+ ARRAY_SIZE(max77686_devs), NULL, 0, NULL);
if (ret < 0)
goto err_mfd;
const struct max77693_irq_data *irq_data =
irq_to_max77693_irq(max77693, data->irq);
+ if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
+ return;
+
if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
else
const struct max77693_irq_data *irq_data =
irq_to_max77693_irq(max77693, data->irq);
+ if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
+ return;
+
if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
max77693->irq_masks_cur[irq_data->group] |= irq_data->mask;
else
if (irq_src & MAX77693_IRQSRC_MUIC)
/* MUIC INT1 ~ INT3 */
- max77693_bulk_read(max77693->regmap, MAX77693_MUIC_REG_INT1,
+ max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1,
MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]);
/* Apply masking */
{
struct irq_domain *domain;
int i;
- int ret;
+ int ret = 0;
+ u8 intsrc_mask;
mutex_init(&max77693->irqlock);
&max77693_irq_domain_ops, max77693);
if (!domain) {
dev_err(max77693->dev, "could not create irq domain\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_irq;
}
max77693->irq_domain = domain;
+ /* Unmask max77693 interrupt */
+ ret = max77693_read_reg(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask);
+ if (ret < 0) {
+ dev_err(max77693->dev, "fail to read PMIC register\n");
+ goto err_irq;
+ }
+
+ intsrc_mask &= ~(MAX77693_IRQSRC_CHG);
+ intsrc_mask &= ~(MAX77693_IRQSRC_FLASH);
+ intsrc_mask &= ~(MAX77693_IRQSRC_MUIC);
+ ret = max77693_write_reg(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask);
+ if (ret < 0) {
+ dev_err(max77693->dev, "fail to write PMIC register\n");
+ goto err_irq;
+ }
+
ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"max77693-irq", max77693);
-
if (ret)
dev_err(max77693->dev, "Failed to request IRQ %d: %d\n",
max77693->irq, ret);
- return 0;
+err_irq:
+ return ret;
}
void max77693_irq_exit(struct max77693_dev *max77693)
max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
i2c_set_clientdata(max77693->haptic, max77693);
+ /*
+ * Initialize register map for MUIC device because use regmap-muic
+ * instance of MUIC device when irq of max77693 is initialized
+ * before call max77693-muic probe() function.
+ */
+ max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic,
+ &max77693_regmap_config);
+ if (IS_ERR(max77693->regmap_muic)) {
+ ret = PTR_ERR(max77693->regmap_muic);
+ dev_err(max77693->dev,
+ "failed to allocate register map: %d\n", ret);
+ goto err_regmap;
+ }
+
ret = max77693_irq_init(max77693);
if (ret < 0)
goto err_irq;
pm_runtime_set_active(max77693->dev);
ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
- ARRAY_SIZE(max77693_devs), NULL, 0);
+ ARRAY_SIZE(max77693_devs), NULL, 0, NULL);
if (ret < 0)
goto err_mfd;
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
ARRAY_SIZE(rtc_devs),
- &rtc_resources[0], chip->irq_base);
+ &rtc_resources[0], chip->irq_base, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out;
ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
ARRAY_SIZE(onkey_devs),
- &onkey_resources[0], 0);
+ &onkey_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
goto out_dev;
if (pdata) {
ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0],
ARRAY_SIZE(regulator_devs),
- ®ulator_resources[0], 0);
+ ®ulator_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add regulator subdev\n");
goto out_dev;
if (pdata && pdata->backlight) {
ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0],
ARRAY_SIZE(backlight_devs),
- &backlight_resources[0], 0);
+ &backlight_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add backlight subdev\n");
goto out_dev;
if (pdata && pdata->power) {
ret = mfd_add_devices(chip->dev, 0, &power_devs[0],
ARRAY_SIZE(power_devs),
- &power_supply_resources[0], 0);
+ &power_supply_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add power supply "
"subdev\n");
if (pdata && pdata->touch) {
ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
ARRAY_SIZE(touch_devs),
- &touch_resources[0], 0);
+ &touch_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add touch subdev\n");
goto out_dev;
mfd_add_devices(max8997->dev, -1, max8997_devs,
ARRAY_SIZE(max8997_devs),
- NULL, 0);
+ NULL, 0, NULL);
/*
* TODO: enable others (flash, muic, rtc, battery, ...) and
switch (id->driver_data) {
case TYPE_LP3974:
ret = mfd_add_devices(max8998->dev, -1,
- lp3974_devs, ARRAY_SIZE(lp3974_devs),
- NULL, 0);
+ lp3974_devs, ARRAY_SIZE(lp3974_devs),
+ NULL, 0, NULL);
break;
case TYPE_MAX8998:
ret = mfd_add_devices(max8998->dev, -1,
- max8998_devs, ARRAY_SIZE(max8998_devs),
- NULL, 0);
+ max8998_devs, ARRAY_SIZE(max8998_devs),
+ NULL, 0, NULL);
break;
default:
ret = -EINVAL;
if (!cell.name)
return -ENOMEM;
- return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0);
+ return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0, NULL);
}
static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format)
static int mfd_add_device(struct device *parent, int id,
const struct mfd_cell *cell,
struct resource *mem_base,
- int irq_base)
+ int irq_base, struct irq_domain *domain)
{
struct resource *res;
struct platform_device *pdev;
struct device_node *np = NULL;
- struct irq_domain *domain = NULL;
int ret = -ENOMEM;
int r;
for_each_child_of_node(parent->of_node, np) {
if (of_device_is_compatible(np, cell->of_compatible)) {
pdev->dev.of_node = np;
- domain = irq_find_host(parent->of_node);
break;
}
}
int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
- int irq_base)
+ int irq_base, struct irq_domain *domain)
{
int i;
int ret = 0;
for (i = 0; i < n_devs; i++) {
atomic_set(&cnts[i], 0);
cells[i].usage_count = &cnts[i];
- ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base);
+ ret = mfd_add_device(parent, id, cells + i, mem_base,
+ irq_base, domain);
if (ret)
break;
}
for (i = 0; i < n_clones; i++) {
cell_entry.name = clones[i];
/* don't give up if a single call fails; just report error */
- if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0))
+ if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0,
+ NULL))
dev_err(dev, "failed to create platform device '%s'\n",
clones[i]);
}
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
- NULL, regmap_irq_chip_get_base(palmas->irq_data));
+ NULL, regmap_irq_chip_get_base(palmas->irq_data),
+ NULL);
kfree(children);
if (ret < 0)
}
ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
- ARRAY_SIZE(rc5t583_subdevs), NULL, 0);
+ ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
goto err_add_devs;
rdc321x_wdt_pdata.sb_pdev = pdev;
return mfd_add_devices(&pdev->dev, -1,
- rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0);
+ rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells),
+ NULL, 0, NULL);
}
static void __devexit rdc321x_sb_remove(struct pci_dev *pdev)
switch (sec_pmic->device_type) {
case S5M8751X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
- ARRAY_SIZE(s5m8751_devs), NULL, 0);
+ ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
break;
case S5M8763X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
- ARRAY_SIZE(s5m8763_devs), NULL, 0);
+ ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
break;
case S5M8767X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
- ARRAY_SIZE(s5m8767_devs), NULL, 0);
+ ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
break;
case S2MPS11X:
ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
- ARRAY_SIZE(s2mps11_devs), NULL, 0);
+ ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
break;
default:
/* If this happens the probe function is problem */
sta2x11_mfd_bar0,
ARRAY_SIZE(sta2x11_mfd_bar0),
&pdev->resource[0],
- 0);
+ 0, NULL);
if (err) {
dev_err(&pdev->dev, "mfd_add_devices[0] failed: %d\n", err);
goto err_disable;
sta2x11_mfd_bar1,
ARRAY_SIZE(sta2x11_mfd_bar1),
&pdev->resource[1],
- 0);
+ 0, NULL);
if (err) {
dev_err(&pdev->dev, "mfd_add_devices[1] failed: %d\n", err);
goto err_disable;
struct mfd_cell *cell, int irq)
{
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
- NULL, stmpe->irq_base + irq);
+ NULL, stmpe->irq_base + irq, NULL);
}
static int __devinit stmpe_devices_init(struct stmpe *stmpe)
ret = mfd_add_devices(&dev->dev, dev->id,
t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells),
- iomem, t7l66xb->irq_base);
+ iomem, t7l66xb->irq_base, NULL);
if (!ret)
return 0;
if (blocks & TC3589x_BLOCK_GPIO) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
- ARRAY_SIZE(tc3589x_dev_gpio), NULL,
- tc3589x->irq_base);
+ ARRAY_SIZE(tc3589x_dev_gpio), NULL,
+ tc3589x->irq_base, NULL);
if (ret) {
dev_err(tc3589x->dev, "failed to add gpio child\n");
return ret;
if (blocks & TC3589x_BLOCK_KEYPAD) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
- ARRAY_SIZE(tc3589x_dev_keypad), NULL,
- tc3589x->irq_base);
+ ARRAY_SIZE(tc3589x_dev_keypad), NULL,
+ tc3589x->irq_base, NULL);
if (ret) {
dev_err(tc3589x->dev, "failed to keypad child\n");
return ret;
printk(KERN_INFO "Toshiba tc6387xb initialised\n");
ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells,
- ARRAY_SIZE(tc6387xb_cells), iomem, irq);
+ ARRAY_SIZE(tc6387xb_cells), iomem, irq, NULL);
if (!ret)
return 0;
tc6393xb_cells[TC6393XB_CELL_FB].pdata_size = sizeof(*tcpd->fb_data);
ret = mfd_add_devices(&dev->dev, dev->id,
- tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
- iomem, tcpd->irq_base);
+ tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
+ iomem, tcpd->irq_base, NULL);
if (!ret)
return 0;
cells[id].data_size = data->pdata_size;
}
- error = mfd_add_devices(dev, 0, cells, 2, NULL, 0);
+ error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL);
if (error < 0) {
dev_err(dev, "cannot add mfd cells\n");
goto error_enable;
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg0,
ARRAY_SIZE(timberdale_cells_bar0_cfg0),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER1:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg1,
ARRAY_SIZE(timberdale_cells_bar0_cfg1),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER2:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg2,
ARRAY_SIZE(timberdale_cells_bar0_cfg2),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER3:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg3,
ARRAY_SIZE(timberdale_cells_bar0_cfg3),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
default:
dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n",
err = mfd_add_devices(&dev->dev, 0,
timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1),
- &dev->resource[1], msix_entries[0].vector);
+ &dev->resource[1], msix_entries[0].vector, NULL);
if (err) {
dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
goto err_mfd2;
((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) {
err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2,
ARRAY_SIZE(timberdale_cells_bar2),
- &dev->resource[2], msix_entries[0].vector);
+ &dev->resource[2], msix_entries[0].vector, NULL);
if (err) {
dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
goto err_mfd2;
}
ret = mfd_add_devices(&client->dev, 0, tps6105x_cells,
- ARRAY_SIZE(tps6105x_cells), NULL, 0);
+ ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL);
if (ret)
goto fail;
ret = mfd_add_devices(tps6507x->dev, -1,
tps6507x_devs, ARRAY_SIZE(tps6507x_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0)
goto err;
}
ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
- ARRAY_SIZE(tps65090s), NULL, 0);
+ ARRAY_SIZE(tps65090s), NULL, 0, NULL);
if (ret) {
dev_err(&client->dev, "add mfd devices failed with err: %d\n",
ret);
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/err.h>
-#include <linux/regulator/of_regulator.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps65217.h>
+static struct mfd_cell tps65217s[] = {
+ {
+ .name = "tps65217-pmic",
+ },
+};
+
/**
* tps65217_reg_read: Read a single tps65217 register.
*
}
EXPORT_SYMBOL_GPL(tps65217_clear_bits);
-#ifdef CONFIG_OF
-static struct of_regulator_match reg_matches[] = {
- { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
- { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
- { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
- { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
- { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
- { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
- { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
-};
-
-static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
-{
- struct device_node *node = client->dev.of_node;
- struct tps65217_board *pdata;
- struct device_node *regs;
- int count = ARRAY_SIZE(reg_matches);
- int ret, i;
-
- regs = of_find_node_by_name(node, "regulators");
- if (!regs)
- return NULL;
-
- ret = of_regulator_match(&client->dev, regs, reg_matches, count);
- of_node_put(regs);
- if ((ret < 0) || (ret > count))
- return NULL;
-
- count = ret;
- pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- for (i = 0; i < count; i++) {
- if (!reg_matches[i].init_data || !reg_matches[i].of_node)
- continue;
-
- pdata->tps65217_init_data[i] = reg_matches[i].init_data;
- pdata->of_node[i] = reg_matches[i].of_node;
- }
-
- return pdata;
-}
-
-static struct of_device_id tps65217_of_match[] = {
- { .compatible = "ti,tps65217", },
- { },
-};
-#else
-static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
-{
- return NULL;
-}
-#endif
-
static struct regmap_config tps65217_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
+static const struct of_device_id tps65217_of_match[] = {
+ { .compatible = "ti,tps65217", .data = (void *)TPS65217 },
+ { /* sentinel */ },
+};
+
static int __devinit tps65217_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
struct tps65217 *tps;
- struct regulator_init_data *reg_data;
- struct tps65217_board *pdata = client->dev.platform_data;
- int i, ret;
unsigned int version;
+ unsigned int chip_id = ids->driver_data;
+ const struct of_device_id *match;
+ int ret;
- if (!pdata && client->dev.of_node)
- pdata = tps65217_parse_dt(client);
+ if (client->dev.of_node) {
+ match = of_match_device(tps65217_of_match, &client->dev);
+ if (!match) {
+ dev_err(&client->dev,
+ "Failed to find matching dt id\n");
+ return -EINVAL;
+ }
+ chip_id = (unsigned int)match->data;
+ }
+
+ if (!chip_id) {
+ dev_err(&client->dev, "id is null.\n");
+ return -ENODEV;
+ }
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
- tps->pdata = pdata;
+ i2c_set_clientdata(client, tps);
+ tps->dev = &client->dev;
+ tps->id = chip_id;
+
tps->regmap = devm_regmap_init_i2c(client, &tps65217_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
return ret;
}
- i2c_set_clientdata(client, tps);
- tps->dev = &client->dev;
+ ret = mfd_add_devices(tps->dev, -1, tps65217s,
+ ARRAY_SIZE(tps65217s), NULL, 0, NULL);
+ if (ret < 0) {
+ dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret);
+ return ret;
+ }
ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version);
if (ret < 0) {
(version & TPS65217_CHIPID_CHIP_MASK) >> 4,
version & TPS65217_CHIPID_REV_MASK);
- for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
- struct platform_device *pdev;
-
- pdev = platform_device_alloc("tps65217-pmic", i);
- if (!pdev) {
- dev_err(tps->dev, "Cannot create regulator %d\n", i);
- continue;
- }
-
- pdev->dev.parent = tps->dev;
- pdev->dev.of_node = pdata->of_node[i];
- reg_data = pdata->tps65217_init_data[i];
- platform_device_add_data(pdev, reg_data, sizeof(*reg_data));
- tps->regulator_pdev[i] = pdev;
-
- platform_device_add(pdev);
- }
-
return 0;
}
static int __devexit tps65217_remove(struct i2c_client *client)
{
struct tps65217 *tps = i2c_get_clientdata(client);
- int i;
- for (i = 0; i < TPS65217_NUM_REGULATOR; i++)
- platform_device_unregister(tps->regulator_pdev[i]);
+ mfd_remove_devices(tps->dev);
return 0;
}
static const struct i2c_device_id tps65217_id_table[] = {
- {"tps65217", 0xF0},
- {/* end of list */}
+ {"tps65217", TPS65217},
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, tps65217_id_table);
}
ret = mfd_add_devices(tps6586x->dev, -1,
- tps6586x_cell, ARRAY_SIZE(tps6586x_cell), NULL, 0);
+ tps6586x_cell, ARRAY_SIZE(tps6586x_cell),
+ NULL, 0, NULL);
if (ret < 0) {
dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
goto err_mfd_add;
ret = mfd_add_devices(tps65910->dev, -1,
tps65910s, ARRAY_SIZE(tps65910s),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0) {
dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
return ret;
ret = mfd_add_devices(tps65912->dev, -1,
tps65912s, ARRAY_SIZE(tps65912s),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0)
goto err;
if (childs)
ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells,
- childs, NULL, 0);
+ childs, NULL, 0, NULL);
else {
dev_err(&pdev->dev, "No platform data found for childs\n");
ret = -ENODEV;
}
ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
- NULL, 0);
+ NULL, 0, NULL);
if (ret)
goto mfd_err;
vx855_gpio_resources[1].end = vx855_gpio_resources[1].start + 3;
ret = mfd_add_devices(&pdev->dev, -1, vx855_cells, ARRAY_SIZE(vx855_cells),
- NULL, 0);
+ NULL, 0, NULL);
/* we always return -ENODEV here in order to enable other
* drivers like old, not-yet-platform_device ported i2c-viapro */
__func__, children);
r = mfd_add_devices(&client->dev, -1, core->cells,
- children, NULL, 0);
+ children, NULL, 0, NULL);
if (r)
goto err;
case WM8310:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8310_devs, ARRAY_SIZE(wm8310_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8311:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8311_devs, ARRAY_SIZE(wm8311_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (!pdata || !pdata->disable_touch)
mfd_add_devices(wm831x->dev, wm831x_num,
touch_devs, ARRAY_SIZE(touch_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8312:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8312_devs, ARRAY_SIZE(wm8312_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (!pdata || !pdata->disable_touch)
mfd_add_devices(wm831x->dev, wm831x_num,
touch_devs, ARRAY_SIZE(touch_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8320:
case WM8326:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8320_devs, ARRAY_SIZE(wm8320_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
default:
if (ret & WM831X_XTAL_ENA) {
ret = mfd_add_devices(wm831x->dev, wm831x_num,
rtc_devs, ARRAY_SIZE(rtc_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret);
goto err_irq;
/* Treat errors as non-critical */
ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs,
ARRAY_SIZE(backlight_devs), NULL,
- 0);
+ 0, NULL);
if (ret < 0)
dev_err(wm831x->dev, "Failed to add backlight: %d\n",
ret);
.pdata_size = sizeof(*wm8400),
};
- return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0);
+ return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0, NULL);
}
/*
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_regulator_devs,
ARRAY_SIZE(wm8994_regulator_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err;
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_devs, ARRAY_SIZE(wm8994_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err_irq;
#define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n))
#define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94)
#define INSTRUCTION_RESET 0xC0
+#define RTS_TXB0 0x01
+#define RTS_TXB1 0x02
+#define RTS_TXB2 0x04
+#define INSTRUCTION_RTS(n) (0x80 | ((n) & 0x07))
+
/* MPC251x registers */
#define CANSTAT 0x0e
static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
int tx_buf_idx)
{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
u32 sid, eid, exide, rtr;
u8 buf[SPI_TRANSFER_BUF_LEN];
buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
- mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+
+ /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
+ priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
+ mcp251x_spi_trans(priv->spi, 1);
}
static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
prod = txdata->tx_bd_prod;
cons = txdata->tx_bd_cons;
- /* NUM_TX_RINGS = number of "next-page" entries
- It will be used as a threshold */
- used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS;
+ used = SUB_S16(prod, cons);
#ifdef BNX2X_STOP_ON_ERROR
WARN_ON(used < 0);
- WARN_ON(used > bp->tx_ring_size);
- WARN_ON((bp->tx_ring_size - used) > MAX_TX_AVAIL);
+ WARN_ON(used > txdata->tx_ring_size);
+ WARN_ON((txdata->tx_ring_size - used) > MAX_TX_AVAIL);
#endif
- return (s16)(bp->tx_ring_size) - used;
+ return (s16)(txdata->tx_ring_size) - used;
}
static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata)
txdata->txq_index = txq_index;
txdata->tx_cons_sb = tx_cons_sb;
txdata->parent_fp = fp;
+ txdata->tx_ring_size = IS_FCOE_FP(fp) ? MAX_TX_AVAIL : bp->tx_ring_size;
DP(NETIF_MSG_IFUP, "created tx data cid %d, txq %d\n",
txdata->cid, txdata->txq_index);
{ 0x70000, 8, RI_ALL_ONLINE },
{ 0x70020, 8184, RI_ALL_OFFLINE },
{ 0x78000, 8192, RI_E3E3B0_OFFLINE },
- { 0x85000, 3, RI_ALL_ONLINE },
- { 0x8501c, 7, RI_ALL_ONLINE },
- { 0x85048, 1, RI_ALL_ONLINE },
- { 0x85200, 32, RI_ALL_ONLINE },
- { 0xb0000, 16384, RI_E1H_ONLINE },
+ { 0x85000, 3, RI_ALL_OFFLINE },
+ { 0x8501c, 7, RI_ALL_OFFLINE },
+ { 0x85048, 1, RI_ALL_OFFLINE },
+ { 0x85200, 32, RI_ALL_OFFLINE },
+ { 0xb0000, 16384, RI_E1H_OFFLINE },
{ 0xc1000, 7, RI_ALL_ONLINE },
{ 0xc103c, 2, RI_E2E3E3B0_ONLINE },
{ 0xc1800, 2, RI_ALL_ONLINE },
{ 0x140188, 3, RI_E1E1HE2E3_ONLINE },
{ 0x140194, 13, RI_ALL_ONLINE },
{ 0x140200, 6, RI_E1E1HE2E3_ONLINE },
- { 0x140220, 4, RI_E2E3_ONLINE },
- { 0x140240, 4, RI_E2E3_ONLINE },
{ 0x140260, 4, RI_E2E3_ONLINE },
{ 0x140280, 4, RI_E2E3_ONLINE },
- { 0x1402a0, 4, RI_E2E3_ONLINE },
- { 0x1402c0, 4, RI_E2E3_ONLINE },
{ 0x1402e0, 2, RI_E2E3_ONLINE },
{ 0x1402e8, 2, RI_E2E3E3B0_ONLINE },
{ 0x1402f0, 9, RI_E2E3_ONLINE },
{ 0x140314, 44, RI_E3B0_ONLINE },
- { 0x1403d0, 70, RI_E3B0_ONLINE },
{ 0x144000, 4, RI_E1E1H_ONLINE },
{ 0x148000, 4, RI_E1E1H_ONLINE },
{ 0x14c000, 4, RI_E1E1H_ONLINE },
{ 0x180398, 1, RI_E2E3E3B0_ONLINE },
{ 0x1803a0, 5, RI_E2E3E3B0_ONLINE },
{ 0x1803b4, 2, RI_E3E3B0_ONLINE },
- { 0x180400, 1, RI_ALL_ONLINE },
{ 0x180404, 255, RI_E1E1H_OFFLINE },
{ 0x181000, 4, RI_ALL_ONLINE },
{ 0x181010, 1020, RI_ALL_OFFLINE },
{ 0x1b905c, 1, RI_E3E3B0_ONLINE },
{ 0x1b9064, 1, RI_E3B0_ONLINE },
{ 0x1b9080, 10, RI_E3B0_ONLINE },
- { 0x1b9400, 14, RI_E2E3E3B0_ONLINE },
- { 0x1b943c, 19, RI_E2E3E3B0_ONLINE },
- { 0x1b9490, 10, RI_E2E3E3B0_ONLINE },
+ { 0x1b9400, 14, RI_E2E3E3B0_OFFLINE },
+ { 0x1b943c, 19, RI_E2E3E3B0_OFFLINE },
+ { 0x1b9490, 10, RI_E2E3E3B0_OFFLINE },
{ 0x1c0000, 2, RI_ALL_ONLINE },
{ 0x200000, 65, RI_ALL_ONLINE },
{ 0x20014c, 2, RI_E1HE2E3E3B0_ONLINE },
{ 0x200398, 1, RI_E2E3E3B0_ONLINE },
{ 0x2003a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x2003a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x200400, 1, RI_ALL_ONLINE },
{ 0x200404, 255, RI_E1E1H_OFFLINE },
{ 0x202000, 4, RI_ALL_ONLINE },
{ 0x202010, 2044, RI_ALL_OFFLINE },
{ 0x280398, 1, RI_E2E3E3B0_ONLINE },
{ 0x2803a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x2803a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x280400, 1, RI_ALL_ONLINE },
{ 0x280404, 255, RI_E1E1H_OFFLINE },
{ 0x282000, 4, RI_ALL_ONLINE },
{ 0x282010, 2044, RI_ALL_OFFLINE },
{ 0x300398, 1, RI_E2E3E3B0_ONLINE },
{ 0x3003a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x3003a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x300400, 1, RI_ALL_ONLINE },
{ 0x300404, 255, RI_E1E1H_OFFLINE },
{ 0x302000, 4, RI_ALL_ONLINE },
{ 0x302010, 2044, RI_ALL_OFFLINE },
struct bnx2x *bp = netdev_priv(dev);
struct dump_hdr dump_hdr = {0};
- regs->version = 0;
+ regs->version = 1;
memset(p, 0, regs->len);
if (!netif_running(bp->dev))
bp->link_params.req_flow_ctrl[cfg_idx] =
BNX2X_FLOW_CTRL_AUTO;
}
+ bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_NONE;
+ if (epause->rx_pause)
+ bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX;
+
+ if (epause->tx_pause)
+ bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX;
}
DP(BNX2X_MSG_ETHTOOL,
return bnx2x_status;
DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n");
- if (CHIP_IS_E3(bp))
- bnx2x_update_pfc_xmac(params, vars, 0);
- else {
+
+ if (CHIP_IS_E3(bp)) {
+ if (vars->mac_type == MAC_TYPE_XMAC)
+ bnx2x_update_pfc_xmac(params, vars, 0);
+ } else {
val = REG_RD(bp, MISC_REG_RESET_REG_2);
if ((val &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
switch (speed_mask) {
case GP_STATUS_10M:
vars->line_speed = SPEED_10;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_10TFD;
else
vars->link_status |= LINK_10THD;
case GP_STATUS_100M:
vars->line_speed = SPEED_100;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_100TXFD;
else
vars->link_status |= LINK_100TXHD;
case GP_STATUS_1G:
case GP_STATUS_1G_KX:
vars->line_speed = SPEED_1000;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_1000TFD;
else
vars->link_status |= LINK_1000THD;
case GP_STATUS_2_5G:
vars->line_speed = SPEED_2500;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_2500TFD;
else
vars->link_status |= LINK_2500THD;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
if (SINGLE_MEDIA_DIRECT(params)) {
+ vars->duplex = duplex;
bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status);
if (phy->req_line_speed == SPEED_AUTO_NEG)
bnx2x_xgxs_an_resolve(phy, params, vars,
LINK_STATUS_PARALLEL_DETECTION_USED;
}
bnx2x_ext_phy_resolve_fc(phy, params, vars);
+ vars->duplex = duplex;
}
}
}
rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
- if (rc < 0)
+
+ if (rc == -EEXIST) {
+ DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
+ /* do not treat adding same MAC as error */
+ rc = 0;
+ } else if (rc < 0)
BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
+
return rc;
}
dev_info.port_hw_config[port].
fcoe_wwn_node_name_lower);
} else if (!IS_MF_SD(bp)) {
- u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
-
/*
* Read the WWN info only if the FCoE feature is enabled for
* this function.
*/
- if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+ if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp))
bnx2x_get_ext_wwn_info(bp, func);
} else if (IS_MF_FCOE_SD(bp))
netdev_for_each_uc_addr(ha, dev) {
rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
BNX2X_UC_LIST_MAC, &ramrod_flags);
- if (rc < 0) {
+ if (rc == -EEXIST) {
+ DP(BNX2X_MSG_SP,
+ "Failed to schedule ADD operations: %d\n", rc);
+ /* do not treat adding same MAC as error */
+ rc = 0;
+
+ } else if (rc < 0) {
+
BNX2X_ERR("Failed to schedule ADD operations: %d\n",
rc);
return rc;
if (CHIP_REV_IS_SLOW(bp))
return;
+ /* Update MCP's statistics if possible */
+ if (bp->func_stx)
+ memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats,
+ sizeof(bp->func_stats));
+
/* loader */
if (bp->executer_idx) {
int loader_idx = PMF_DMAE_C(bp);
} else if (bp->func_stx) {
*stats_comp = 0;
- memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats,
- sizeof(bp->func_stats));
bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
}
}
if (bp->port.pmf)
bnx2x_hw_stats_update(bp);
- if (bnx2x_storm_stats_update(bp) && (bp->stats_pending++ == 3)) {
- BNX2X_ERR("storm stats were not updated for 3 times\n");
- bnx2x_panic();
+ if (bnx2x_storm_stats_update(bp)) {
+ if (bp->stats_pending++ == 3) {
+ BNX2X_ERR("storm stats were not updated for 3 times\n");
+ bnx2x_panic();
+ }
return;
}
/* Only one can be built-in;-> */
static struct net_device *znet_dev;
+#define NETIDBLK_MAGIC "NETIDBLK"
+#define NETIDBLK_MAGIC_SIZE 8
+
struct netidblk {
- char magic[8]; /* The magic number (string) "NETIDBLK" */
+ char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */
unsigned char netid[8]; /* The physical station address */
char nettype, globalopt;
char vendor[8]; /* The machine vendor and product name. */
struct znet_private *znet;
struct net_device *dev;
char *p;
+ char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE);
int err = -ENOMEM;
/* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */
- for(p = (char *)phys_to_virt(0xf0000); p < (char *)phys_to_virt(0x100000); p++)
- if (*p == 'N' && strncmp(p, "NETIDBLK", 8) == 0)
+ for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++)
+ if (*p == 'N' &&
+ strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0)
break;
- if (p >= (char *)phys_to_virt(0x100000)) {
+ if (p > plast) {
if (znet_debug > 1)
printk(KERN_INFO "No Z-Note ethernet adaptor found.\n");
return -ENODEV;
}
if (adapter->rx_queue.queue_addr != NULL) {
- if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) {
- dma_unmap_single(dev,
- adapter->rx_queue.queue_dma,
- adapter->rx_queue.queue_len,
- DMA_BIDIRECTIONAL);
- adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
- }
- kfree(adapter->rx_queue.queue_addr);
+ dma_free_coherent(dev, adapter->rx_queue.queue_len,
+ adapter->rx_queue.queue_addr,
+ adapter->rx_queue.queue_dma);
adapter->rx_queue.queue_addr = NULL;
}
goto err_out;
}
+ dev = &adapter->vdev->dev;
+
adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) *
rxq_entries;
- adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len,
- GFP_KERNEL);
+ adapter->rx_queue.queue_addr =
+ dma_alloc_coherent(dev, adapter->rx_queue.queue_len,
+ &adapter->rx_queue.queue_dma, GFP_KERNEL);
if (!adapter->rx_queue.queue_addr) {
netdev_err(netdev, "unable to allocate rx queue pages\n");
goto err_out;
}
- dev = &adapter->vdev->dev;
-
adapter->buffer_list_dma = dma_map_single(dev,
adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL);
adapter->filter_list_dma = dma_map_single(dev,
adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL);
- adapter->rx_queue.queue_dma = dma_map_single(dev,
- adapter->rx_queue.queue_addr,
- adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL);
if ((dma_mapping_error(dev, adapter->buffer_list_dma)) ||
- (dma_mapping_error(dev, adapter->filter_list_dma)) ||
- (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) {
+ (dma_mapping_error(dev, adapter->filter_list_dma))) {
netdev_err(netdev, "unable to map filter or buffer list "
"pages\n");
rc = -ENOMEM;
mlx4_info(dev, "non-primary physical function, skipping.\n");
else
mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
- goto unmap_bf;
+ return err;
}
err = mlx4_load_fw(dev);
if (err) {
mlx4_err(dev, "Failed to start FW, aborting.\n");
- goto unmap_bf;
+ return err;
}
mlx4_cfg.log_pg_sz_m = 1;
err = mlx4_init_slave(dev);
if (err) {
mlx4_err(dev, "Failed to initialize slave\n");
- goto unmap_bf;
+ return err;
}
err = mlx4_slave_cap(dev);
err = mlx4_QUERY_ADAPTER(dev, &adapter);
if (err) {
mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n");
- goto err_close;
+ goto unmap_bf;
}
priv->eq_table.inta_pin = adapter.inta_pin;
return 0;
+unmap_bf:
+ unmap_bf_area(dev);
+
err_close:
mlx4_close_hca(dev);
mlx4_UNMAP_FA(dev);
mlx4_free_icm(dev, priv->fw.fw_icm, 0);
}
-unmap_bf:
- unmap_bf_area(dev);
return err;
}
}
slave_start:
- if (mlx4_cmd_init(dev)) {
+ err = mlx4_cmd_init(dev);
+ if (err) {
mlx4_err(dev, "Failed to init command interface, aborting.\n");
goto err_sriov;
}
return err;
}
-static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 pf_num,
+static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 port,
enum mlx4_steer_type steer,
u32 qpn)
{
- struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[pf_num];
+ struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[port - 1];
struct mlx4_promisc_qp *pqp;
list_for_each_entry(pqp, &s_steer->promisc_qps[steer], list) {
/* If the given qpn is also a promisc qp,
* it should be inserted to duplicates list
*/
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (pqp) {
dqp = kmalloc(sizeof *dqp, GFP_KERNEL);
if (!dqp) {
s_steer = &mlx4_priv(dev)->steer[port - 1];
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (!pqp)
return 0; /* nothing to do */
s_steer = &mlx4_priv(dev)->steer[port - 1];
/* if qp is not promisc, it cannot be duplicated */
- if (!get_promisc_qp(dev, 0, steer, qpn))
+ if (!get_promisc_qp(dev, port, steer, qpn))
return false;
/* The qp is promisc qp so it is a duplicate on this index
members_count = be32_to_cpu(mgm->members_count) & 0xffffff;
for (i = 0; i < members_count; i++) {
qpn = be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK;
- if (!get_promisc_qp(dev, 0, steer, qpn) && qpn != tqpn) {
+ if (!get_promisc_qp(dev, port, steer, qpn) && qpn != tqpn) {
/* the qp is not promisc, the entry can't be removed */
goto out;
}
mutex_lock(&priv->mcg_table.mutex);
- if (get_promisc_qp(dev, 0, steer, qpn)) {
+ if (get_promisc_qp(dev, port, steer, qpn)) {
err = 0; /* Noting to do, already exists */
goto out_mutex;
}
s_steer = &mlx4_priv(dev)->steer[port - 1];
mutex_lock(&priv->mcg_table.mutex);
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (unlikely(!pqp)) {
mlx4_warn(dev, "QP %x is not promiscuous QP\n", qpn);
/* nothing to do */
return err;
}
-struct mlx4_net_trans_rule_hw_ctrl {
- __be32 ctrl;
- __be32 vf_vep_port;
- __be32 qpn;
- __be32 reserved;
-};
-
static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl,
struct mlx4_net_trans_rule_hw_ctrl *hw)
{
hw->qpn = cpu_to_be32(ctrl->qpn);
}
-struct mlx4_net_trans_rule_hw_ib {
- u8 size;
- u8 rsvd1;
- __be16 id;
- u32 rsvd2;
- __be32 qpn;
- __be32 qpn_mask;
- u8 dst_gid[16];
- u8 dst_gid_msk[16];
-} __packed;
-
-struct mlx4_net_trans_rule_hw_eth {
- u8 size;
- u8 rsvd;
- __be16 id;
- u8 rsvd1[6];
- u8 dst_mac[6];
- u16 rsvd2;
- u8 dst_mac_msk[6];
- u16 rsvd3;
- u8 src_mac[6];
- u16 rsvd4;
- u8 src_mac_msk[6];
- u8 rsvd5;
- u8 ether_type_enable;
- __be16 ether_type;
- __be16 vlan_id_msk;
- __be16 vlan_id;
-} __packed;
-
-struct mlx4_net_trans_rule_hw_tcp_udp {
- u8 size;
- u8 rsvd;
- __be16 id;
- __be16 rsvd1[3];
- __be16 dst_port;
- __be16 rsvd2;
- __be16 dst_port_msk;
- __be16 rsvd3;
- __be16 src_port;
- __be16 rsvd4;
- __be16 src_port_msk;
-} __packed;
-
-struct mlx4_net_trans_rule_hw_ipv4 {
- u8 size;
- u8 rsvd;
- __be16 id;
- __be32 rsvd1;
- __be32 dst_ip;
- __be32 dst_ip_msk;
- __be32 src_ip;
- __be32 src_ip_msk;
-} __packed;
-
-struct _rule_hw {
- union {
- struct {
- u8 size;
- u8 rsvd;
- __be16 id;
- };
- struct mlx4_net_trans_rule_hw_eth eth;
- struct mlx4_net_trans_rule_hw_ib ib;
- struct mlx4_net_trans_rule_hw_ipv4 ipv4;
- struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp;
- };
+const u16 __sw_id_hw[] = {
+ [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001,
+ [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005,
+ [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003,
+ [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002,
+ [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004,
+ [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006
};
static int parse_trans_rule(struct mlx4_dev *dev, struct mlx4_spec_list *spec,
struct _rule_hw *rule_hw)
{
- static const u16 __sw_id_hw[] = {
- [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001,
- [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005,
- [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003,
- [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002,
- [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004,
- [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006
- };
-
static const size_t __rule_hw_sz[] = {
[MLX4_NET_TRANS_RULE_ID_ETH] =
sizeof(struct mlx4_net_trans_rule_hw_eth),
struct list_head steer_entries[MLX4_NUM_STEERS];
};
+struct mlx4_net_trans_rule_hw_ctrl {
+ __be32 ctrl;
+ __be32 vf_vep_port;
+ __be32 qpn;
+ __be32 reserved;
+};
+
+struct mlx4_net_trans_rule_hw_ib {
+ u8 size;
+ u8 rsvd1;
+ __be16 id;
+ u32 rsvd2;
+ __be32 qpn;
+ __be32 qpn_mask;
+ u8 dst_gid[16];
+ u8 dst_gid_msk[16];
+} __packed;
+
+struct mlx4_net_trans_rule_hw_eth {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ u8 rsvd1[6];
+ u8 dst_mac[6];
+ u16 rsvd2;
+ u8 dst_mac_msk[6];
+ u16 rsvd3;
+ u8 src_mac[6];
+ u16 rsvd4;
+ u8 src_mac_msk[6];
+ u8 rsvd5;
+ u8 ether_type_enable;
+ __be16 ether_type;
+ __be16 vlan_id_msk;
+ __be16 vlan_id;
+} __packed;
+
+struct mlx4_net_trans_rule_hw_tcp_udp {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ __be16 rsvd1[3];
+ __be16 dst_port;
+ __be16 rsvd2;
+ __be16 dst_port_msk;
+ __be16 rsvd3;
+ __be16 src_port;
+ __be16 rsvd4;
+ __be16 src_port_msk;
+} __packed;
+
+struct mlx4_net_trans_rule_hw_ipv4 {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ __be32 rsvd1;
+ __be32 dst_ip;
+ __be32 dst_ip_msk;
+ __be32 src_ip;
+ __be32 src_ip_msk;
+} __packed;
+
+struct _rule_hw {
+ union {
+ struct {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ };
+ struct mlx4_net_trans_rule_hw_eth eth;
+ struct mlx4_net_trans_rule_hw_ib ib;
+ struct mlx4_net_trans_rule_hw_ipv4 ipv4;
+ struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp;
+ };
+};
+
struct mlx4_priv {
struct mlx4_dev dev;
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
#include "mlx4.h"
#include "fw.h"
return err;
}
+/*
+ * MAC validation for Flow Steering rules.
+ * VF can attach rules only with a mac address which is assigned to it.
+ */
+static int validate_eth_header_mac(int slave, struct _rule_hw *eth_header,
+ struct list_head *rlist)
+{
+ struct mac_res *res, *tmp;
+ __be64 be_mac;
+
+ /* make sure it isn't multicast or broadcast mac*/
+ if (!is_multicast_ether_addr(eth_header->eth.dst_mac) &&
+ !is_broadcast_ether_addr(eth_header->eth.dst_mac)) {
+ list_for_each_entry_safe(res, tmp, rlist, list) {
+ be_mac = cpu_to_be64(res->mac << 16);
+ if (!memcmp(&be_mac, eth_header->eth.dst_mac, ETH_ALEN))
+ return 0;
+ }
+ pr_err("MAC %pM doesn't belong to VF %d, Steering rule rejected\n",
+ eth_header->eth.dst_mac, slave);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * In case of missing eth header, append eth header with a MAC address
+ * assigned to the VF.
+ */
+static int add_eth_header(struct mlx4_dev *dev, int slave,
+ struct mlx4_cmd_mailbox *inbox,
+ struct list_head *rlist, int header_id)
+{
+ struct mac_res *res, *tmp;
+ u8 port;
+ struct mlx4_net_trans_rule_hw_ctrl *ctrl;
+ struct mlx4_net_trans_rule_hw_eth *eth_header;
+ struct mlx4_net_trans_rule_hw_ipv4 *ip_header;
+ struct mlx4_net_trans_rule_hw_tcp_udp *l4_header;
+ __be64 be_mac = 0;
+ __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16);
+
+ ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
+ port = be32_to_cpu(ctrl->vf_vep_port) & 0xff;
+ eth_header = (struct mlx4_net_trans_rule_hw_eth *)(ctrl + 1);
+
+ /* Clear a space in the inbox for eth header */
+ switch (header_id) {
+ case MLX4_NET_TRANS_RULE_ID_IPV4:
+ ip_header =
+ (struct mlx4_net_trans_rule_hw_ipv4 *)(eth_header + 1);
+ memmove(ip_header, eth_header,
+ sizeof(*ip_header) + sizeof(*l4_header));
+ break;
+ case MLX4_NET_TRANS_RULE_ID_TCP:
+ case MLX4_NET_TRANS_RULE_ID_UDP:
+ l4_header = (struct mlx4_net_trans_rule_hw_tcp_udp *)
+ (eth_header + 1);
+ memmove(l4_header, eth_header, sizeof(*l4_header));
+ break;
+ default:
+ return -EINVAL;
+ }
+ list_for_each_entry_safe(res, tmp, rlist, list) {
+ if (port == res->port) {
+ be_mac = cpu_to_be64(res->mac << 16);
+ break;
+ }
+ }
+ if (!be_mac) {
+ pr_err("Failed adding eth header to FS rule, Can't find matching MAC for port %d .\n",
+ port);
+ return -EINVAL;
+ }
+
+ memset(eth_header, 0, sizeof(*eth_header));
+ eth_header->size = sizeof(*eth_header) >> 2;
+ eth_header->id = cpu_to_be16(__sw_id_hw[MLX4_NET_TRANS_RULE_ID_ETH]);
+ memcpy(eth_header->dst_mac, &be_mac, ETH_ALEN);
+ memcpy(eth_header->dst_mac_msk, &mac_msk, ETH_ALEN);
+
+ return 0;
+
+}
+
int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
+
+ struct mlx4_priv *priv = mlx4_priv(dev);
+ struct mlx4_resource_tracker *tracker = &priv->mfunc.master.res_tracker;
+ struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC];
int err;
+ struct mlx4_net_trans_rule_hw_ctrl *ctrl;
+ struct _rule_hw *rule_header;
+ int header_id;
if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
return -EOPNOTSUPP;
+ ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
+ rule_header = (struct _rule_hw *)(ctrl + 1);
+ header_id = map_hw_to_sw_id(be16_to_cpu(rule_header->id));
+
+ switch (header_id) {
+ case MLX4_NET_TRANS_RULE_ID_ETH:
+ if (validate_eth_header_mac(slave, rule_header, rlist))
+ return -EINVAL;
+ break;
+ case MLX4_NET_TRANS_RULE_ID_IPV4:
+ case MLX4_NET_TRANS_RULE_ID_TCP:
+ case MLX4_NET_TRANS_RULE_ID_UDP:
+ pr_warn("Can't attach FS rule without L2 headers, adding L2 header.\n");
+ if (add_eth_header(dev, slave, inbox, rlist, header_id))
+ return -EINVAL;
+ vhcr->in_modifier +=
+ sizeof(struct mlx4_net_trans_rule_hw_eth) >> 2;
+ break;
+ default:
+ pr_err("Corrupted mailbox.\n");
+ return -EINVAL;
+ }
+
err = mlx4_cmd_imm(dev, inbox->dma, &vhcr->out_param,
vhcr->in_modifier, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
sp->srings = sr;
sp->rx_desc = sp->srings->rxvector;
sp->tx_desc = sp->srings->txvector;
+ spin_lock_init(&sp->tx_lock);
/* A couple calculations now, saves many cycles later. */
setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS);
if (ret < 0)
goto err;
- if (info->subdriver && info->subdriver->suspend)
+ if (intf == info->control && info->subdriver && info->subdriver->suspend)
ret = info->subdriver->suspend(intf, message);
if (ret < 0)
usbnet_resume(intf);
struct usbnet *dev = usb_get_intfdata(intf);
struct qmi_wwan_state *info = (void *)&dev->data;
int ret = 0;
+ bool callsub = (intf == info->control && info->subdriver && info->subdriver->resume);
- if (info->subdriver && info->subdriver->resume)
+ if (callsub)
ret = info->subdriver->resume(intf);
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
- if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend)
+ if (ret < 0 && callsub && info->subdriver->suspend)
info->subdriver->suspend(intf, PMSG_SUSPEND);
err:
return ret;
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
- {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
{QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
{QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
{QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+ {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
{QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
return -EIO;
}
- *datap = *attrdata;
+ *datap = le16_to_cpu(*attrdata);
kfree(attrdata);
return result;
}
EXPORT_SYMBOL_GPL(usbnet_start_xmit);
-static void rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
{
struct urb *urb;
int i;
+ int ret = 0;
/* don't refill the queue all at once */
for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
urb = usb_alloc_urb(0, flags);
if (urb != NULL) {
- if (rx_submit(dev, urb, flags) == -ENOLINK)
- return;
+ ret = rx_submit(dev, urb, flags);
+ if (ret)
+ goto err;
+ } else {
+ ret = -ENOMEM;
+ goto err;
}
}
+err:
+ return ret;
}
/*-------------------------------------------------------------------------*/
int temp = dev->rxq.qlen;
if (temp < RX_QLEN(dev)) {
- rx_alloc_submit(dev, GFP_ATOMIC);
+ if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
+ return;
if (temp != dev->rxq.qlen)
netif_dbg(dev, link, dev->net,
"rxqlen %d --> %d\n",
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/cdev.h>
#include <linux/dma-mapping.h>
};
int training_power;
int i, val;
+ u32 am2pm_mask = ah->paprd_ratemask;
if (IS_CHAN_2GHZ(ah->curchan))
training_power = ar9003_get_training_power_2g(ah);
}
ah->paprd_training_power = training_power;
+ if (AR_SREV_9330(ah))
+ am2pm_mask = 0;
+
REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK,
ah->paprd_ratemask);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK,
- ah->paprd_ratemask);
+ am2pm_mask);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK,
ah->paprd_ratemask_ht40);
}
EXPORT_SYMBOL(ar9003_paprd_setup_gain_table);
+static bool ar9003_paprd_retrain_pa_in(struct ath_hw *ah,
+ struct ath9k_hw_cal_data *caldata,
+ int chain)
+{
+ u32 *pa_in = caldata->pa_table[chain];
+ int capdiv_offset, quick_drop_offset;
+ int capdiv2g, quick_drop;
+ int count = 0;
+ int i;
+
+ if (!AR_SREV_9485(ah) && !AR_SREV_9330(ah))
+ return false;
+
+ capdiv2g = REG_READ_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+ AR_PHY_65NM_CH0_TXRF3_CAPDIV2G);
+
+ quick_drop = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP);
+
+ if (quick_drop)
+ quick_drop -= 0x40;
+
+ for (i = 0; i < NUM_BIN + 1; i++) {
+ if (pa_in[i] == 1400)
+ count++;
+ }
+
+ if (AR_SREV_9485(ah)) {
+ if (pa_in[23] < 800) {
+ capdiv_offset = (int)((1000 - pa_in[23] + 75) / 150);
+ capdiv2g += capdiv_offset;
+ if (capdiv2g > 7) {
+ capdiv2g = 7;
+ if (pa_in[23] < 600) {
+ quick_drop++;
+ if (quick_drop > 0)
+ quick_drop = 0;
+ }
+ }
+ } else if (pa_in[23] == 1400) {
+ quick_drop_offset = min_t(int, count / 3, 2);
+ quick_drop += quick_drop_offset;
+ capdiv2g += quick_drop_offset / 2;
+
+ if (capdiv2g > 7)
+ capdiv2g = 7;
+
+ if (quick_drop > 0) {
+ quick_drop = 0;
+ capdiv2g -= quick_drop_offset;
+ if (capdiv2g < 0)
+ capdiv2g = 0;
+ }
+ } else {
+ return false;
+ }
+ } else if (AR_SREV_9330(ah)) {
+ if (pa_in[23] < 1000) {
+ capdiv_offset = (1000 - pa_in[23]) / 100;
+ capdiv2g += capdiv_offset;
+ if (capdiv_offset > 3) {
+ capdiv_offset = 1;
+ quick_drop--;
+ }
+
+ capdiv2g += capdiv_offset;
+ if (capdiv2g > 6)
+ capdiv2g = 6;
+ if (quick_drop < -4)
+ quick_drop = -4;
+ } else if (pa_in[23] == 1400) {
+ if (count > 3) {
+ quick_drop++;
+ capdiv2g -= count / 4;
+ if (quick_drop > -2)
+ quick_drop = -2;
+ } else {
+ capdiv2g--;
+ }
+
+ if (capdiv2g < 0)
+ capdiv2g = 0;
+ } else {
+ return false;
+ }
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+ AR_PHY_65NM_CH0_TXRF3_CAPDIV2G, capdiv2g);
+ REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
+ quick_drop);
+
+ return true;
+}
+
int ar9003_paprd_create_curve(struct ath_hw *ah,
struct ath9k_hw_cal_data *caldata, int chain)
{
if (!create_pa_curve(data_L, data_U, pa_table, small_signal_gain))
status = -2;
+ if (ar9003_paprd_retrain_pa_in(ah, caldata, chain))
+ status = -EINPROGRESS;
+
REG_CLR_BIT(ah, AR_PHY_PAPRD_TRAINER_STAT1,
AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE);
#define AR_PHY_AIC_CTRL_4_B0 (AR_SM_BASE + 0x4c0)
#define AR_PHY_AIC_STAT_2_B0 (AR_SM_BASE + 0x4cc)
+#define AR_PHY_65NM_CH0_TXRF3 0x16048
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G 0x0000001e
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G_S 1
+
#define AR_PHY_65NM_CH0_SYNTH4 0x1608c
#define AR_PHY_SYNTH4_LONG_SHIFT_SELECT (AR_SREV_9462(ah) ? 0x00000001 : 0x00000002)
#define AR_PHY_SYNTH4_LONG_SHIFT_SELECT_S (AR_SREV_9462(ah) ? 0 : 1)
{
struct ath_btcoex *btcoex = &sc->btcoex;
- ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
+ if (btcoex->hw_timer_enabled)
+ ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
}
u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen)
ah->config.spurchans[i][1] = AR_NO_SPUR;
}
- /* PAPRD needs some more work to be enabled */
- ah->config.paprd_disable = 1;
-
ah->config.rx_intr_mitigation = true;
ah->config.pcieSerDesWrite = true;
else
imr_reg |= AR_IMR_TXOK;
- if (opmode == NL80211_IFTYPE_AP)
- imr_reg |= AR_IMR_MIB;
-
ENABLE_REGWRITE_BUFFER(ah);
REG_WRITE(ah, AR_IMR, imr_reg);
/* Operating channel changed, reset channel calibration data */
memset(caldata, 0, sizeof(*caldata));
ath9k_init_nfcal_hist_buffer(ah, chan);
+ } else if (caldata) {
+ caldata->paprd_packet_sent = false;
}
ah->noise = ath9k_hw_getchan_noise(ah, chan);
pCap->tx_desc_len = sizeof(struct ar9003_txc);
pCap->txs_len = sizeof(struct ar9003_txs);
if (!ah->config.paprd_disable &&
- ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
+ ah->eep_ops->get_eeprom(ah, EEP_PAPRD) &&
+ !AR_SREV_9462(ah))
pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
} else {
pCap->tx_desc_len = sizeof(struct ath_desc);
int8_t iCoff;
int8_t qCoff;
bool rtt_done;
+ bool paprd_packet_sent;
bool paprd_done;
bool nfcal_pending;
bool nfcal_interference;
int chain_ok = 0;
int chain;
int len = 1800;
+ int ret;
- if (!caldata)
+ if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done)
return;
ath9k_ps_wakeup(sc);
continue;
chain_ok = 0;
-
- ath_dbg(common, CALIBRATE,
- "Sending PAPRD frame for thermal measurement on chain %d\n",
- chain);
- if (!ath_paprd_send_frame(sc, skb, chain))
- goto fail_paprd;
-
ar9003_paprd_setup_gain_table(ah, chain);
ath_dbg(common, CALIBRATE,
break;
}
- if (ar9003_paprd_create_curve(ah, caldata, chain)) {
+ ret = ar9003_paprd_create_curve(ah, caldata, chain);
+ if (ret == -EINPROGRESS) {
+ ath_dbg(common, CALIBRATE,
+ "PAPRD curve on chain %d needs to be re-trained\n",
+ chain);
+ break;
+ } else if (ret) {
ath_dbg(common, CALIBRATE,
"PAPRD create curve failed on chain %d\n",
chain);
ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb);
+ if (sc->sc_ah->caldata)
+ sc->sc_ah->caldata->paprd_packet_sent = true;
+
if (!(tx_flags & ATH_TX_ERROR))
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
else
devinfo->bus_pub.bus->dstats.tx_errors++;
- dev_kfree_skb(req->skb);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
devinfo->bus_pub.bus->dstats.rx_packets++;
} else {
devinfo->bus_pub.bus->dstats.rx_errors++;
- dev_kfree_skb(skb);
+ brcmu_pkt_buf_free_skb(skb);
brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
return;
}
if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) {
brcmf_dbg(ERROR, "rx protocol error\n");
brcmu_pkt_buf_free_skb(skb);
+ brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
devinfo->bus_pub.bus->dstats.rx_errors++;
} else {
brcmf_rx_packet(devinfo->dev, ifidx, skb);
brcmf_usb_rx_refill(devinfo, req);
}
} else {
- dev_kfree_skb(skb);
+ brcmu_pkt_buf_free_skb(skb);
+ brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
}
return;
usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe,
skb->data, skb_tailroom(skb), brcmf_usb_rx_complete,
req);
- req->urb->transfer_flags |= URB_ZERO_PACKET;
req->devinfo = devinfo;
+ brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
ret = usb_submit_urb(req->urb, GFP_ATOMIC);
- if (ret == 0) {
- brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
- } else {
- dev_kfree_skb(req->skb);
+ if (ret) {
+ brcmf_usb_del_fromq(devinfo, req);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
}
req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq);
if (!req) {
+ brcmu_pkt_buf_free_skb(skb);
brcmf_dbg(ERROR, "no req to send\n");
return -ENOMEM;
}
- if (!req->urb) {
- brcmf_dbg(ERROR, "no urb for req %p\n", req);
- return -ENOBUFS;
- }
req->skb = skb;
req->devinfo = devinfo;
usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe,
skb->data, skb->len, brcmf_usb_tx_complete, req);
req->urb->transfer_flags |= URB_ZERO_PACKET;
+ brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
ret = usb_submit_urb(req->urb, GFP_ATOMIC);
- if (!ret) {
- brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
- } else {
+ if (ret) {
+ brcmf_dbg(ERROR, "brcmf_usb_tx usb_submit_urb FAILED\n");
+ brcmf_usb_del_fromq(devinfo, req);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
}
}
if (test_bit(WL_STATUS_CONNECTED, &cfg_priv->status)) {
- scb_val.val = cpu_to_le32(0);
+ memset(&scb_val, 0, sizeof(scb_val));
err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_RSSI, &scb_val,
sizeof(struct brcmf_scb_val_le));
- if (err)
+ if (err) {
WL_ERR("Could not get rssi (%d)\n", err);
-
- rssi = le32_to_cpu(scb_val.val);
- sinfo->filled |= STATION_INFO_SIGNAL;
- sinfo->signal = rssi;
- WL_CONN("RSSI %d dBm\n", rssi);
+ } else {
+ rssi = le32_to_cpu(scb_val.val);
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = rssi;
+ WL_CONN("RSSI %d dBm\n", rssi);
+ }
}
done:
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
+ /* If we're powered off anyway, just let the mmc layer remove the
+ * card. */
+ if (!lbs_iface_active(card->priv))
+ return -ENOSYS;
+
dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
sdio_func_id(func), flags);
cmd_code = le16_to_cpu(host_cmd->command);
cmd_size = le16_to_cpu(host_cmd->size);
- skb_trim(cmd_node->cmd_skb, cmd_size);
+ /* Adjust skb length */
+ if (cmd_node->cmd_skb->len > cmd_size)
+ /*
+ * cmd_size is less than sizeof(struct host_cmd_ds_command).
+ * Trim off the unused portion.
+ */
+ skb_trim(cmd_node->cmd_skb, cmd_size);
+ else if (cmd_node->cmd_skb->len < cmd_size)
+ /*
+ * cmd_size is larger than sizeof(struct host_cmd_ds_command)
+ * because we have appended custom IE TLV. Increase skb length
+ * accordingly.
+ */
+ skb_put(cmd_node->cmd_skb, cmd_size - cmd_node->cmd_skb->len);
do_gettimeofday(&tstamp);
dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d,"
static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
+ rt2x00_set_field32(®, GPIOCSR_BIT8, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
/*
* Initialize hw specifications.
*/
#define GPIOCSR_BIT5 FIELD32(0x00000020)
#define GPIOCSR_BIT6 FIELD32(0x00000040)
#define GPIOCSR_BIT7 FIELD32(0x00000080)
+#define GPIOCSR_BIT8 FIELD32(0x00000100)
/*
* BBPPCSR: BBP Pin control register.
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
+ rt2x00_set_field32(®, GPIOCSR_DIR0, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
/*
* Initialize hw specifications.
*/
u16 reg;
rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
- return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
+ return rt2x00_get_field16(reg, MAC_CSR19_BIT7);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u16 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
+ rt2x00_set_field16(®, MAC_CSR19_BIT8, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
/*
* Initialize hw specifications.
*/
* MAC_CSR19: GPIO control register.
*/
#define MAC_CSR19 0x0426
-#define MAC_CSR19_BIT0 FIELD32(0x0001)
-#define MAC_CSR19_BIT1 FIELD32(0x0002)
-#define MAC_CSR19_BIT2 FIELD32(0x0004)
-#define MAC_CSR19_BIT3 FIELD32(0x0008)
-#define MAC_CSR19_BIT4 FIELD32(0x0010)
-#define MAC_CSR19_BIT5 FIELD32(0x0020)
-#define MAC_CSR19_BIT6 FIELD32(0x0040)
-#define MAC_CSR19_BIT7 FIELD32(0x0080)
+#define MAC_CSR19_BIT0 FIELD16(0x0001)
+#define MAC_CSR19_BIT1 FIELD16(0x0002)
+#define MAC_CSR19_BIT2 FIELD16(0x0004)
+#define MAC_CSR19_BIT3 FIELD16(0x0008)
+#define MAC_CSR19_BIT4 FIELD16(0x0010)
+#define MAC_CSR19_BIT5 FIELD16(0x0020)
+#define MAC_CSR19_BIT6 FIELD16(0x0040)
+#define MAC_CSR19_BIT7 FIELD16(0x0080)
+#define MAC_CSR19_BIT8 FIELD16(0x0100)
/*
* MAC_CSR20: LED control register.
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
msleep(1);
rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
}
static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
/*
* Initialize hw specifications.
*/
skb_pull(entry->skb, RXINFO_DESC_SIZE);
/*
- * FIXME: we need to check for rx_pkt_len validity
+ * Check for rx_pkt_len validity. Return if invalid, leaving
+ * rxdesc->size zeroed out by the upper level.
*/
+ if (unlikely(rx_pkt_len == 0 ||
+ rx_pkt_len > entry->queue->data_size)) {
+ ERROR(entry->queue->rt2x00dev,
+ "Bad frame size %d, forcing to 0\n", rx_pkt_len);
+ return;
+ }
+
rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
/*
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+ rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
/*
* Initialize hw specifications.
*/
{ USB_DEVICE(0x1690, 0x0744) },
{ USB_DEVICE(0x1690, 0x0761) },
{ USB_DEVICE(0x1690, 0x0764) },
+ /* ASUS */
+ { USB_DEVICE(0x0b05, 0x179d) },
/* Cisco */
{ USB_DEVICE(0x167b, 0x4001) },
/* EnGenius */
{ USB_DEVICE(0x0b05, 0x1760) },
{ USB_DEVICE(0x0b05, 0x1761) },
{ USB_DEVICE(0x0b05, 0x1790) },
- { USB_DEVICE(0x0b05, 0x179d) },
/* AzureWave */
{ USB_DEVICE(0x13d3, 0x3262) },
{ USB_DEVICE(0x13d3, 0x3284) },
*/
if (unlikely(rxdesc.size == 0 ||
rxdesc.size > entry->queue->data_size)) {
- WARNING(rt2x00dev, "Wrong frame size %d max %d.\n",
+ ERROR(rt2x00dev, "Wrong frame size %d max %d.\n",
rxdesc.size, entry->queue->data_size);
dev_kfree_skb(entry->skb);
goto renew_skb;
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Disable power saving.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
+ rt2x00_set_field32(®, MAC_CSR13_BIT13, 1);
+ rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
+
/*
* Initialize hw specifications.
*/
#define MAC_CSR13_BIT10 FIELD32(0x00000400)
#define MAC_CSR13_BIT11 FIELD32(0x00000800)
#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13 FIELD32(0x00002000)
/*
* MAC_CSR14: LED control register.
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
if (retval)
return retval;
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
+ rt2x00_set_field32(®, MAC_CSR13_BIT15, 0);
+ rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
/*
* Initialize hw specifications.
*/
#define MAC_CSR13_BIT10 FIELD32(0x00000400)
#define MAC_CSR13_BIT11 FIELD32(0x00000800)
#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13 FIELD32(0x00002000)
+#define MAC_CSR13_BIT14 FIELD32(0x00004000)
+#define MAC_CSR13_BIT15 FIELD32(0x00008000)
/*
* MAC_CSR14: LED control register.
interface->capability &= ~ACER_CAP_BRIGHTNESS;
pr_info("Brightness must be controlled by acpi video driver\n");
} else {
-#ifdef CONFIG_ACPI_VIDEO
pr_info("Disabling ACPI video driver\n");
acpi_video_unregister();
-#endif
}
if (wmi_has_guid(WMID_GUID3)) {
for (i = 0; i < 4; i++) {
tmpval = (val >> (i * 8)) & 0xff;
- outb(tmpval, port + i);
+ outb(tmpval, gmux_data->iostart + port + i);
}
}
u8 val;
mutex_lock(&gmux_data->index_lock);
- outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_ready(gmux_data);
+ outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
+ gmux_index_wait_complete(gmux_data);
val = inb(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
u32 val;
mutex_lock(&gmux_data->index_lock);
- outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_ready(gmux_data);
+ outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
+ gmux_index_wait_complete(gmux_data);
val = inl(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE);
if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) {
if (gmux_is_indexed(gmux_data)) {
+ u32 version;
mutex_init(&gmux_data->index_lock);
gmux_data->indexed = true;
+ version = gmux_read32(gmux_data,
+ GMUX_PORT_VERSION_MAJOR);
+ ver_major = (version >> 24) & 0xff;
+ ver_minor = (version >> 16) & 0xff;
+ ver_release = (version >> 8) & 0xff;
} else {
pr_info("gmux device not present\n");
ret = -ENODEV;
goto err_release;
}
- pr_info("Found indexed gmux\n");
- } else {
- pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor,
- ver_release);
}
+ pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor,
+ ver_release, (gmux_data->indexed ? "indexed" : "classic"));
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
* Disable the other backlight choices.
*/
acpi_video_dmi_promote_vendor();
-#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE)
acpi_video_unregister();
-#endif
apple_bl_unregister();
gmux_data->power_state = VGA_SWITCHEROO_ON;
kfree(gmux_data);
acpi_video_dmi_demote_vendor();
-#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE)
acpi_video_register();
-#endif
apple_bl_register();
}
static char *bled_type = "unknown";
module_param(wled_type, charp, 0444);
-MODULE_PARM_DESC(wlan_status, "Set the wled type on boot "
+MODULE_PARM_DESC(wled_type, "Set the wled type on boot "
"(unknown, led or rfkill). "
"default is unknown");
* The significance of others is yet to be found.
* If we don't find the method, we assume the device are present.
*/
- rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp);
+ rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "HRWS value : %#x\n",
+ len += sprintf(page + len, "HWRS value : %#x\n",
(uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
* The significance of others is yet to be found.
*/
status =
- acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result);
+ acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
if (!ACPI_FAILURE(status))
- pr_notice(" HRWS returned %x", (int)hwrs_result);
+ pr_notice(" HWRS returned %x", (int)hwrs_result);
if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
asus->have_rsts = true;
#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#ifdef CONFIG_ACPI_VIDEO
#include <acpi/video.h>
-#endif
#include "asus-wmi.h"
if (asus->driver->quirks->wmi_backlight_power)
acpi_video_dmi_promote_vendor();
if (!acpi_video_backlight_support()) {
-#ifdef CONFIG_ACPI_VIDEO
pr_info("Disabling ACPI video driver\n");
acpi_video_unregister();
-#endif
err = asus_wmi_backlight_init(asus);
if (err && err != -ENODEV)
goto fail_backlight;
if (!bus) {
pr_warn("Unable to find PCI bus 1?\n");
- goto out_unlock;
+ goto out_put_dev;
}
if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) {
pr_err("Unable to read PCI config space?\n");
- goto out_unlock;
+ goto out_put_dev;
}
absent = (l == 0xffffffff);
absent ? "absent" : "present");
pr_warn("skipped wireless hotplug as probably "
"inappropriate for this model\n");
- goto out_unlock;
+ goto out_put_dev;
}
if (!blocked) {
if (dev) {
/* Device already present */
pci_dev_put(dev);
- goto out_unlock;
+ goto out_put_dev;
}
dev = pci_scan_single_device(bus, 0);
if (dev) {
pci_dev_put(dev);
}
}
+out_put_dev:
+ pci_dev_put(port);
}
out_unlock:
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/ctype.h>
-#ifdef CONFIG_ACPI_VIDEO
#include <acpi/video.h>
-#endif
/*
* This driver is needed because a number of Samsung laptops do not hook
samsung->handle_backlight = false;
} else if (samsung->quirks->broken_acpi_video) {
pr_info("Disabling ACPI video driver\n");
-#ifdef CONFIG_ACPI_VIDEO
acpi_video_unregister();
-#endif
}
#endif
*/
static int acpi_evalf(acpi_handle handle,
- void *res, char *method, char *fmt, ...)
+ int *res, char *method, char *fmt, ...)
{
char *fmt0 = fmt;
struct acpi_object_list params;
success = (status == AE_OK &&
out_obj.type == ACPI_TYPE_INTEGER);
if (success && res)
- *(int *)res = out_obj.integer.value;
+ *res = out_obj.integer.value;
break;
case 'v': /* void */
success = status == AE_OK;
* Add TPACPI_FAN_RD_ACPI_FANS ? */
switch (fan_status_access_mode) {
- case TPACPI_FAN_RD_ACPI_GFAN:
+ case TPACPI_FAN_RD_ACPI_GFAN: {
/* 570, 600e/x, 770e, 770x */
+ int res;
- if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+ if (unlikely(!acpi_evalf(gfan_handle, &res, NULL, "d")))
return -EIO;
if (likely(status))
- *status = s & 0x07;
+ *status = res & 0x07;
break;
-
+ }
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
writel(period_cycles, pc->mmio_base + CAP3);
}
+ if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ reg_val = readw(pc->mmio_base + ECCTL2);
+ /* Disable APWM mode to put APWM output Low */
+ reg_val &= ~ECCTL2_APWM_MODE;
+ writew(reg_val, pc->mmio_base + ECCTL2);
+ }
+
pm_runtime_put_sync(pc->chip.dev);
return 0;
}
struct pwm_chip chip;
unsigned int clk_rate;
void __iomem *mmio_base;
+ unsigned long period_cycles[NUM_PWM_CHANNEL];
};
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
unsigned long long c;
unsigned long period_cycles, duty_cycles;
unsigned short ps_divval, tb_divval;
+ int i;
if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
return -ERANGE;
duty_cycles = (unsigned long)c;
}
+ /*
+ * Period values should be same for multiple PWM channels as IP uses
+ * same period register for multiple channels.
+ */
+ for (i = 0; i < NUM_PWM_CHANNEL; i++) {
+ if (pc->period_cycles[i] &&
+ (pc->period_cycles[i] != period_cycles)) {
+ /*
+ * Allow channel to reconfigure period if no other
+ * channels being configured.
+ */
+ if (i == pwm->hwpwm)
+ continue;
+
+ dev_err(chip->dev, "Period value conflicts with channel %d\n",
+ i);
+ return -EINVAL;
+ }
+ }
+
+ pc->period_cycles[pwm->hwpwm] = period_cycles;
+
/* Configure clock prescaler to support Low frequency PWM wave */
if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
&tb_divval)) {
static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
+
+ /* set period value to zero on free */
+ pc->period_cycles[pwm->hwpwm] = 0;
}
static const struct pwm_ops ehrpwm_pwm_ops = {
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps65217.h>
NULL),
};
+#ifdef CONFIG_OF
+static struct of_regulator_match reg_matches[] = {
+ { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
+ { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
+ { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
+ { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
+ { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
+ { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
+ { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
+};
+
+static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev)
+{
+ struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *node = tps->dev->of_node;
+ struct tps65217_board *pdata;
+ struct device_node *regs;
+ int i, count;
+
+ regs = of_find_node_by_name(node, "regulators");
+ if (!regs)
+ return NULL;
+
+ count = of_regulator_match(pdev->dev.parent, regs,
+ reg_matches, TPS65217_NUM_REGULATOR);
+ of_node_put(regs);
+ if ((count < 0) || (count > TPS65217_NUM_REGULATOR))
+ return NULL;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ for (i = 0; i < count; i++) {
+ if (!reg_matches[i].init_data || !reg_matches[i].of_node)
+ continue;
+
+ pdata->tps65217_init_data[i] = reg_matches[i].init_data;
+ pdata->of_node[i] = reg_matches[i].of_node;
+ }
+
+ return pdata;
+}
+#else
+static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit tps65217_regulator_probe(struct platform_device *pdev)
{
+ struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+ struct tps65217_board *pdata = dev_get_platdata(tps->dev);
+ struct regulator_init_data *reg_data;
struct regulator_dev *rdev;
- struct tps65217 *tps;
- struct tps_info *info = &tps65217_pmic_regs[pdev->id];
struct regulator_config config = { };
+ int i, ret;
- /* Already set by core driver */
- tps = dev_to_tps65217(pdev->dev.parent);
- tps->info[pdev->id] = info;
+ if (tps->dev->of_node)
+ pdata = tps65217_parse_dt(pdev);
- config.dev = &pdev->dev;
- config.of_node = pdev->dev.of_node;
- config.init_data = pdev->dev.platform_data;
- config.driver_data = tps;
+ if (!pdata) {
+ dev_err(&pdev->dev, "Platform data not found\n");
+ return -EINVAL;
+ }
- rdev = regulator_register(®ulators[pdev->id], &config);
- if (IS_ERR(rdev))
- return PTR_ERR(rdev);
+ if (tps65217_chip_id(tps) != TPS65217) {
+ dev_err(&pdev->dev, "Invalid tps chip version\n");
+ return -ENODEV;
+ }
- platform_set_drvdata(pdev, rdev);
+ platform_set_drvdata(pdev, tps);
+ for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
+
+ reg_data = pdata->tps65217_init_data[i];
+
+ /*
+ * Regulator API handles empty constraints but not NULL
+ * constraints
+ */
+ if (!reg_data)
+ continue;
+
+ /* Register the regulators */
+ tps->info[i] = &tps65217_pmic_regs[i];
+
+ config.dev = tps->dev;
+ config.init_data = reg_data;
+ config.driver_data = tps;
+ config.regmap = tps->regmap;
+ if (tps->dev->of_node)
+ config.of_node = pdata->of_node[i];
+
+ rdev = regulator_register(®ulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(tps->dev, "failed to register %s regulator\n",
+ pdev->name);
+ ret = PTR_ERR(rdev);
+ goto err_unregister_regulator;
+ }
+
+ /* Save regulator for cleanup */
+ tps->rdev[i] = rdev;
+ }
return 0;
+
+err_unregister_regulator:
+ while (--i >= 0)
+ regulator_unregister(tps->rdev[i]);
+
+ return ret;
}
static int __devexit tps65217_regulator_remove(struct platform_device *pdev)
{
- struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ struct tps65217 *tps = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < TPS65217_NUM_REGULATOR; i++)
+ regulator_unregister(tps->rdev[i]);
platform_set_drvdata(pdev, NULL);
- regulator_unregister(rdev);
return 0;
}
#define ANDROID_ALARM_WAIT _IO('a', 1)
#define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size)
+#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size)
+
/* Set alarm */
#define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec)
#define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec)
-#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec)
+#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec)
#define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec)
#define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0)))
#define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4)
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in dio200_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via dio200_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return dio200_pci_common_attach(dev, pci_dev);
}
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pc236_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pc236_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pc236_pci_common_attach(dev, pci_dev);
}
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pc263_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pc263_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pc263_pci_common_attach(dev, pci_dev);
}
DRIVER_NAME ": BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pci224_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pci224_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pci224_attach_common(dev, pci_dev, NULL);
}
"amplc_pci230: BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pci230_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pci230_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pci230_attach_common(dev, pci_dev);
}
int chan;
lsb = data[0] & 0xff;
- msb = (data[0] >> 8) & 0xf;
+ msb = (data[0] >> 8) & 0xff;
chan = CR_CHAN(insn->chanspec);
.ai = das08_ai_rinsn,
.ai_nbits = 16,
.ai_pg = das08_pg_none,
- .ai_encoding = das08_encode12,
+ .ai_encoding = das08_encode16,
.ao = das08jr_ao_winsn,
.ao_nbits = 16,
.di = das08jr_di_rbits,
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in das08_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via das08_attach()
+ * has been removed.
+ */
+ pci_dev_get(pdev);
return das08_pci_attach_common(dev, pdev);
}
if (rx_array == NULL)
return -ENOMEM;
ret = lis3l02dq_read_all(indio_dev, rx_array);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(rx_array);
return ret;
+ }
for (i = 0; i < scan_count; i++)
data[i] = combine_8_to_16(rx_array[i*4+1],
rx_array[i*4+3]);
ret = strict_strtoul(buf, 10, &lval);
if (ret)
return ret;
+ if (lval == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
if (iio_buffer_enabled(indio_dev)) {
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
if (spi_get_device_id(st->us)) {
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
}
ret = mfd_add_devices(nvec->dev, -1, nvec_devices,
- ARRAY_SIZE(nvec_devices), base, 0);
+ ARRAY_SIZE(nvec_devices), base, 0, NULL);
if (ret)
dev_err(nvec->dev, "error adding subdevices\n");
mode->vsync_end = mode->vsync_start + timings->vsw;
mode->vtotal = mode->vsync_end + timings->vbp;
- /* note: whether or not it is interlaced, +/- h/vsync, etc,
- * which should be set in the mode flags, is not exposed in
- * the omap_video_timings struct.. but hdmi driver tracks
- * those separately so all we have to have to set the mode
- * is the way to recover these timings values, and the
- * omap_dss_driver would do the rest.
- */
+ mode->flags = 0;
+
+ if (timings->interlace)
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+ if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH)
+ mode->flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH)
+ mode->flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
}
static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
timings->vfp = mode->vsync_start - mode->vdisplay;
timings->vsw = mode->vsync_end - mode->vsync_start;
timings->vbp = mode->vtotal - mode->vsync_end;
+
+ timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ else
+ timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ else
+ timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW;
+
+ timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+ timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
}
static void omap_connector_dpms(struct drm_connector *connector, int mode)
}
} else {
struct drm_display_mode *mode = drm_mode_create(dev);
- struct omap_video_timings timings;
+ struct omap_video_timings timings = {0};
dssdrv->get_timings(dssdev, &timings);
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev = omap_connector->dssdev;
struct omap_dss_driver *dssdrv = dssdev->driver;
- struct omap_video_timings timings;
+ struct omap_video_timings timings = {0};
copy_timings_drm_to_omap(&timings, mode);
#include <linux/cdev.h>
#include <linux/uaccess.h>
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include "ozconfig.h"
if (old_pd)
oz_pd_put(old_pd);
} else {
- if (!memcmp(addr, "\0\0\0\0\0\0", sizeof(addr))) {
+ if (is_zero_ether_addr(addr)) {
spin_lock_bh(&g_cdev.lock);
pd = g_cdev.active_pd;
g_cdev.active_pd = 0;
if (skb == NULL)
goto _recv_indicatepkt_drop;
skb->data = precv_frame->u.hdr.rx_data;
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
- skb->tail = (sk_buff_data_t)(precv_frame->u.hdr.rx_tail -
- precv_frame->u.hdr.rx_head);
-#else
- skb->tail = (sk_buff_data_t)precv_frame->u.hdr.rx_tail;
-#endif
skb->len = precv_frame->u.hdr.len;
+ skb_set_tail_pointer(skb, skb->len);
if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
} else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
cbHeaderSize += 6;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
- if ((*pwType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((*pwType == cpu_to_be16(ETH_P_IPX)) ||
(*pwType == cpu_to_le16(0xF380))) {
cbHeaderSize -= 8;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
// 802.1H
if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
if (pDevice->dwDiagRefCount == 0) {
- if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) ||
(psEthHeader->wType == cpu_to_le16(0xF380))) {
memcpy((PBYTE) (pbyPayloadHead),
abySNAP_Bridgetunnel, 6);
Packet_Type = skb->data[ETH_HLEN+1];
Descriptor_type = skb->data[ETH_HLEN+1+1+2];
Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]);
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
- /* 802.1x OR eapol-key challenge frame transfer */
- if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
- (Packet_Type == 3)) {
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+ /* 802.1x OR eapol-key challenge frame transfer */
+ if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
+ (Packet_Type == 3)) {
bTxeapol_key = TRUE;
if(!(Key_info & BIT3) && //WPA or RSN group-key challenge
(Key_info & BIT8) && (Key_info & BIT9)) { //send 2/2 key
}
}
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
- if (pDevice->byBBType != BB_TYPE_11A) {
- pDevice->wCurrentRate = RATE_1M;
- pDevice->byACKRate = RATE_1M;
- pDevice->byTopCCKBasicRate = RATE_1M;
- pDevice->byTopOFDMBasicRate = RATE_6M;
- } else {
- pDevice->wCurrentRate = RATE_6M;
- pDevice->byACKRate = RATE_6M;
- pDevice->byTopCCKBasicRate = RATE_1M;
- pDevice->byTopOFDMBasicRate = RATE_6M;
- }
- }
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+ if (pDevice->byBBType != BB_TYPE_11A) {
+ pDevice->wCurrentRate = RATE_1M;
+ pDevice->byACKRate = RATE_1M;
+ pDevice->byTopCCKBasicRate = RATE_1M;
+ pDevice->byTopOFDMBasicRate = RATE_6M;
+ } else {
+ pDevice->wCurrentRate = RATE_6M;
+ pDevice->byACKRate = RATE_6M;
+ pDevice->byTopCCKBasicRate = RATE_1M;
+ pDevice->byTopOFDMBasicRate = RATE_6M;
+ }
+ }
DBG_PRT(MSG_LEVEL_DEBUG,
KERN_INFO "dma_tx: pDevice->wCurrentRate = %d\n",
if (bNeedEncryption == TRUE) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
- if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) {
+ if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) {
bNeedEncryption = FALSE;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
return result;
}
-int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_scan_request *request)
+int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
{
+ struct net_device *dev = request->wdev->netdev;
struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
wlandevice_t *wlandev = dev->ml_priv;
struct p80211msg_dot11req_scan msg1;
void *pampd, struct tmem_pool *pool,
struct tmem_oid *oid, uint32_t index)
{
- int ret = 0;
-
BUG_ON(!is_ephemeral(pool));
- zbud_decompress((struct page *)(data), pampd);
+ if (zbud_decompress((struct page *)(data), pampd) < 0)
+ return -EINVAL;
zbud_free_and_delist((struct zbud_hdr *)pampd);
atomic_dec(&zcache_curr_eph_pampd_count);
- return ret;
+ return 0;
}
/*
{
struct iscsi_session *sess = NULL;
struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf;
+ int ret;
sess = kzalloc(sizeof(struct iscsi_session), GFP_KERNEL);
if (!sess) {
return -ENOMEM;
}
spin_lock(&sess_idr_lock);
- idr_get_new(&sess_idr, NULL, &sess->session_index);
+ ret = idr_get_new(&sess_idr, NULL, &sess->session_index);
spin_unlock(&sess_idr_lock);
+ if (ret < 0) {
+ pr_err("idr_get_new() for sess_idr failed\n");
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_NO_RESOURCES);
+ kfree(sess);
+ return -ENOMEM;
+ }
+
sess->creation_time = get_jiffies_64();
spin_lock_init(&sess->session_stats_lock);
/*
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return -EINVAL;
}
+ if (cmd->data_length < 4) {
+ pr_warn("SET TARGET PORT GROUPS parameter list length %u too"
+ " small\n", cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(cmd);
/*
unsigned char *buf;
u32 lun_count = 0, offset = 8, i;
+ if (se_cmd->data_length < 16) {
+ pr_warn("REPORT LUNS allocation length %u too small\n",
+ se_cmd->data_length);
+ se_cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(se_cmd);
if (!buf)
return -ENOMEM;
struct iblock_dev *ibd = dev->dev_ptr;
unsigned char *buf, *ptr = NULL;
sector_t lba;
- int size = cmd->data_length;
+ int size;
u32 range;
int ret = 0;
int dl, bd_dl;
+ if (cmd->data_length < 8) {
+ pr_warn("UNMAP parameter list length %u too small\n",
+ cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(cmd);
dl = get_unaligned_be16(&buf[0]);
bd_dl = get_unaligned_be16(&buf[2]);
- size = min(size - 8, bd_dl);
+ size = cmd->data_length - 8;
+ if (bd_dl > size)
+ pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n",
+ cmd->data_length, bd_dl);
+ else
+ size = bd_dl;
+
if (size / 16 > dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) {
cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
ret = -EINVAL;
tidh_new->dest_local_nexus = 1;
list_add_tail(&tidh_new->dest_list, &tid_dest_list);
+ if (cmd->data_length < 28) {
+ pr_warn("SPC-PR: Received PR OUT parameter list"
+ " length too small: %u\n", cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ ret = -EINVAL;
+ goto out;
+ }
+
buf = transport_kmap_data_sg(cmd);
/*
* For a PERSISTENT RESERVE OUT specify initiator ports payload,
kfree(pdv);
}
-static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg)
+static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg,
+ unsigned char *sense_buffer)
{
struct pscsi_dev_virt *pdv = cmd->se_dev->dev_ptr;
struct scsi_device *sd = pdv->pdv_sd;
* not been allocated because TCM is handling the emulation directly.
*/
if (!pt)
- return 0;
+ return;
cdb = &pt->pscsi_cdb[0];
result = pt->pscsi_result;
* Hack to make sure that Write-Protect modepage is set if R/O mode is
* forced.
*/
+ if (!cmd->se_deve || !cmd->data_length)
+ goto after_mode_sense;
+
if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) &&
(status_byte(result) << 1) == SAM_STAT_GOOD) {
- if (!cmd->se_deve)
- goto after_mode_sense;
-
if (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) {
unsigned char *buf = transport_kmap_data_sg(cmd);
}
after_mode_sense:
- if (sd->type != TYPE_TAPE)
+ if (sd->type != TYPE_TAPE || !cmd->data_length)
goto after_mode_select;
/*
}
after_mode_select:
- if (status_byte(result) & CHECK_CONDITION)
- return 1;
-
- return 0;
+ if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) {
+ memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER);
+ cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+ }
}
enum {
return -ENOMEM;
}
-static unsigned char *pscsi_get_sense_buffer(struct se_cmd *cmd)
-{
- struct pscsi_plugin_task *pt = cmd->priv;
-
- return pt->pscsi_sense;
-}
-
/* pscsi_get_device_rev():
*
*
.check_configfs_dev_params = pscsi_check_configfs_dev_params,
.set_configfs_dev_params = pscsi_set_configfs_dev_params,
.show_configfs_dev_params = pscsi_show_configfs_dev_params,
- .get_sense_buffer = pscsi_get_sense_buffer,
.get_device_rev = pscsi_get_device_rev,
.get_device_type = pscsi_get_device_type,
.get_blocks = pscsi_get_blocks,
static int spc_emulate_request_sense(struct se_cmd *cmd)
{
unsigned char *cdb = cmd->t_task_cdb;
- unsigned char *buf;
+ unsigned char *rbuf;
u8 ua_asc = 0, ua_ascq = 0;
- int err = 0;
+ unsigned char buf[SE_SENSE_BUF];
+
+ memset(buf, 0, SE_SENSE_BUF);
if (cdb[1] & 0x01) {
pr_err("REQUEST_SENSE description emulation not"
return -ENOSYS;
}
- buf = transport_kmap_data_sg(cmd);
-
- if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
+ rbuf = transport_kmap_data_sg(cmd);
+ if (cmd->scsi_sense_reason != 0) {
+ /*
+ * Out of memory. We will fail with CHECK CONDITION, so
+ * we must not clear the unit attention condition.
+ */
+ target_complete_cmd(cmd, CHECK_CONDITION);
+ return 0;
+ } else if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
/*
* CURRENT ERROR, UNIT ATTENTION
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION;
- if (cmd->data_length < 18) {
- buf[7] = 0x00;
- err = -EINVAL;
- goto end;
- }
/*
* The Additional Sense Code (ASC) from the UNIT ATTENTION
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE;
- if (cmd->data_length < 18) {
- buf[7] = 0x00;
- err = -EINVAL;
- goto end;
- }
/*
* NO ADDITIONAL SENSE INFORMATION
*/
buf[7] = 0x0A;
}
-end:
- transport_kunmap_data_sg(cmd);
+ if (rbuf) {
+ memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length));
+ transport_kunmap_data_sg(cmd);
+ }
+
target_complete_cmd(cmd, GOOD);
return 0;
}
transport_generic_request_failure(cmd);
}
+/*
+ * Used when asking transport to copy Sense Data from the underlying
+ * Linux/SCSI struct scsi_cmnd
+ */
+static unsigned char *transport_get_sense_buffer(struct se_cmd *cmd)
+{
+ unsigned char *buffer = cmd->sense_buffer;
+ struct se_device *dev = cmd->se_dev;
+ u32 offset = 0;
+
+ WARN_ON(!cmd->se_lun);
+
+ if (!dev)
+ return NULL;
+
+ if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION)
+ return NULL;
+
+ offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER);
+
+ /* Automatically padded */
+ cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset;
+
+ pr_debug("HBA_[%u]_PLUG[%s]: Requesting sense for SAM STATUS: 0x%02x\n",
+ dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status);
+ return &buffer[offset];
+}
+
void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status)
{
struct se_device *dev = cmd->se_dev;
cmd->transport_state &= ~CMD_T_BUSY;
if (dev && dev->transport->transport_complete) {
- if (dev->transport->transport_complete(cmd,
- cmd->t_data_sg) != 0) {
- cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+ dev->transport->transport_complete(cmd,
+ cmd->t_data_sg,
+ transport_get_sense_buffer(cmd));
+ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)
success = 1;
- }
}
/*
/* Returns CHECK_CONDITION + INVALID_CDB_FIELD */
goto out_invalid_cdb_field;
}
-
+ /*
+ * For the overflow case keep the existing fabric provided
+ * ->data_length. Otherwise for the underflow case, reset
+ * ->data_length to the smaller SCSI expected data transfer
+ * length.
+ */
if (size > cmd->data_length) {
cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
cmd->residual_count = (size - cmd->data_length);
} else {
cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT;
cmd->residual_count = (cmd->data_length - size);
+ cmd->data_length = size;
}
- cmd->data_length = size;
}
return 0;
}
EXPORT_SYMBOL(target_execute_cmd);
-/*
- * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd
- */
-static int transport_get_sense_data(struct se_cmd *cmd)
-{
- unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL;
- struct se_device *dev = cmd->se_dev;
- unsigned long flags;
- u32 offset = 0;
-
- WARN_ON(!cmd->se_lun);
-
- if (!dev)
- return 0;
-
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) {
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return 0;
- }
-
- if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE))
- goto out;
-
- if (!dev->transport->get_sense_buffer) {
- pr_err("dev->transport->get_sense_buffer is NULL\n");
- goto out;
- }
-
- sense_buffer = dev->transport->get_sense_buffer(cmd);
- if (!sense_buffer) {
- pr_err("ITT 0x%08x cmd %p: Unable to locate"
- " sense buffer for task with sense\n",
- cmd->se_tfo->get_task_tag(cmd), cmd);
- goto out;
- }
-
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-
- offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER);
-
- memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER);
-
- /* Automatically padded */
- cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset;
-
- pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n",
- dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status);
- return 0;
-
-out:
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return -1;
-}
-
/*
* Process all commands up to the last received ORDERED task attribute which
* requires another blocking boundary
static void target_complete_ok_work(struct work_struct *work)
{
struct se_cmd *cmd = container_of(work, struct se_cmd, work);
- int reason = 0, ret;
+ int ret;
/*
* Check if we need to move delayed/dormant tasks from cmds on the
schedule_work(&cmd->se_dev->qf_work_queue);
/*
- * Check if we need to retrieve a sense buffer from
+ * Check if we need to send a sense buffer from
* the struct se_cmd in question.
*/
if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) {
- if (transport_get_sense_data(cmd) < 0)
- reason = TCM_NON_EXISTENT_LUN;
-
- if (cmd->scsi_status) {
- ret = transport_send_check_condition_and_sense(
- cmd, reason, 1);
- if (ret == -EAGAIN || ret == -ENOMEM)
- goto queue_full;
+ WARN_ON(!cmd->scsi_status);
+ ret = transport_send_check_condition_and_sense(
+ cmd, 0, 1);
+ if (ret == -EAGAIN || ret == -ENOMEM)
+ goto queue_full;
- transport_lun_remove_cmd(cmd);
- transport_cmd_check_stop_to_fabric(cmd);
- return;
- }
+ transport_lun_remove_cmd(cmd);
+ transport_cmd_check_stop_to_fabric(cmd);
+ return;
}
/*
* Check for a callback, used by amongst other things
struct page **pages;
int i;
- BUG_ON(!sg);
/*
* We need to take into account a possible offset here for fabrics like
* tcm_loop who may be using a contig buffer from the SCSI midlayer for
*/
if (!cmd->t_data_nents)
return NULL;
- else if (cmd->t_data_nents == 1)
+
+ BUG_ON(!sg);
+ if (cmd->t_data_nents == 1)
return kmap(sg_page(sg)) + sg->offset;
/* >1 page. use vmap */
pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL);
- if (!pages)
+ if (!pages) {
+ cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return NULL;
+ }
/* convert sg[] to pages[] */
for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) {
cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL);
kfree(pages);
- if (!cmd->t_data_vmap)
+ if (!cmd->t_data_vmap) {
+ cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return NULL;
+ }
return cmd->t_data_vmap + cmd->t_data_sg[0].offset;
}
* into the fabric for data transfers, go ahead and complete it right
* away.
*/
- if (!cmd->data_length) {
+ if (!cmd->data_length &&
+ cmd->t_task_cdb[0] != REQUEST_SENSE &&
+ cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) {
spin_lock_irq(&cmd->t_state_lock);
cmd->t_state = TRANSPORT_COMPLETE;
cmd->transport_state |= CMD_T_ACTIVE;
spin_unlock_irq(&cmd->t_state_lock);
- if (cmd->t_task_cdb[0] == REQUEST_SENSE) {
- u8 ua_asc = 0, ua_ascq = 0;
-
- core_scsi3_ua_clear_for_request_sense(cmd,
- &ua_asc, &ua_ascq);
- }
-
INIT_WORK(&cmd->work, target_complete_ok_work);
queue_work(target_completion_wq, &cmd->work);
return 0;
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
{
unsigned int val;
- unsigned int ufcr_rfdiv;
-
- /* set receiver / transmitter trigger level.
- * RFDIV is set such way to satisfy requested uartclk value
- */
- val = TXTL << 10 | RXTL;
- ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
- / sport->port.uartclk;
-
- if(!ufcr_rfdiv)
- ufcr_rfdiv = 1;
-
- val |= UFCR_RFDIV_REG(ufcr_rfdiv);
+ /* set receiver / transmitter trigger level */
+ val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+ val |= TXTL << UFCR_TXTL_SHF | RXTL;
writel(val, sport->port.membase + UFCR);
-
return 0;
}
}
}
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* Finally, clear and enable interrupts
*/
/*
* Enable modem status interrupts
*/
- spin_lock_irqsave(&sport->port.lock,flags);
imx_enable_ms(&sport->port);
spin_unlock_irqrestore(&sport->port.lock,flags);
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ unsigned long flags;
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR2);
temp &= ~(UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
if (USE_IRDA(sport)) {
struct imxuart_platform_data *pdata;
* Disable all interrupts, port and break condition.
*/
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
if (USE_IRDA(sport))
temp &= ~(UCR1_IREN);
writel(temp, sport->port.membase + UCR1);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void
struct imx_port *sport = imx_ports[co->index];
struct imx_port_ucrs old_ucr;
unsigned int ucr1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* First, save UCR1/2/3 and then disable interrupts
while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
imx_port_ucrs_restore(&sport->port, &old_ucr);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*
}
/**
- * hw_device_state: enables/disables interrupts & starts/stops device (execute
- * without interruption)
+ * hw_device_state: enables/disables interrupts (execute without interruption)
* @dma: 0 => disable, !0 => enable and set dma engine
*
* This function returns an error code
/* interrupt, error, port change, reset, sleep/suspend */
hw_write(ci, OP_USBINTR, ~0,
USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
- hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
} else {
- hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
hw_write(ci, OP_USBINTR, ~0, 0);
}
return 0;
{
struct ci13xxx_req *mReq, *mReqTemp;
struct ci13xxx_ep *mEpTemp = mEp;
- int uninitialized_var(retval);
-
- if (list_empty(&mEp->qh.queue))
- return -EINVAL;
+ int retval = 0;
list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
queue) {
return -ENOTSUPP;
}
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnet
+ */
+static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+
+ if (is_on)
+ hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+ else
+ hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+
+ return 0;
+}
+
static int ci13xxx_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
static int ci13xxx_stop(struct usb_gadget *gadget,
static const struct usb_gadget_ops usb_gadget_ops = {
.vbus_session = ci13xxx_vbus_session,
.wakeup = ci13xxx_wakeup,
+ .pullup = ci13xxx_pullup,
.vbus_draw = ci13xxx_vbus_draw,
.udc_start = ci13xxx_start,
.udc_stop = ci13xxx_stop,
mEp->ep.name = mEp->name;
mEp->ep.ops = &usb_ep_ops;
- mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+ /*
+ * for ep0: maxP defined in desc, for other
+ * eps, maxP is set by epautoconfig() called
+ * by gadget layer
+ */
+ mEp->ep.maxpacket = (unsigned short)~0;
INIT_LIST_HEAD(&mEp->qh.queue);
mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
else
ci->ep0in = mEp;
+ mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
continue;
}
return retval;
}
+static void destroy_eps(struct ci13xxx *ci)
+{
+ int i;
+
+ for (i = 0; i < ci->hw_ep_max; i++) {
+ struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
+
+ dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+ }
+}
+
/**
* ci13xxx_start: register a gadget driver
* @gadget: our gadget
if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
if (ci->transceiver == NULL) {
retval = -ENODEV;
- goto free_pools;
+ goto destroy_eps;
}
}
remove_trans:
if (!IS_ERR_OR_NULL(ci->transceiver)) {
- otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
+ otg_set_peripheral(ci->transceiver->otg, NULL);
if (ci->global_phy)
usb_put_phy(ci->transceiver);
}
put_transceiver:
if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
usb_put_phy(ci->transceiver);
+destroy_eps:
+ destroy_eps(ci);
free_pools:
dma_pool_destroy(ci->td_pool);
free_qh_pool:
*/
static void udc_stop(struct ci13xxx *ci)
{
- int i;
-
if (ci == NULL)
return;
usb_del_gadget_udc(&ci->gadget);
- for (i = 0; i < ci->hw_ep_max; i++) {
- struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
-
- dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
- }
+ destroy_eps(ci);
dma_pool_destroy(ci->td_pool);
dma_pool_destroy(ci->qh_pool);
/* return intfdata if we own the interface, else look up intf in the list */
static struct wdm_device *wdm_find_device(struct usb_interface *intf)
{
- struct wdm_device *desc = NULL;
+ struct wdm_device *desc;
spin_lock(&wdm_device_list_lock);
list_for_each_entry(desc, &wdm_device_list, device_list)
if (desc->intf == intf)
- break;
+ goto found;
+ desc = NULL;
+found:
spin_unlock(&wdm_device_list_lock);
return desc;
static struct wdm_device *wdm_find_device_by_minor(int minor)
{
- struct wdm_device *desc = NULL;
+ struct wdm_device *desc;
spin_lock(&wdm_device_list_lock);
list_for_each_entry(desc, &wdm_device_list, device_list)
if (desc->intf->minor == minor)
- break;
+ goto found;
+ desc = NULL;
+found:
spin_unlock(&wdm_device_list_lock);
return desc;
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Microchip Joss Optical infrared touchboard device */
+ { USB_DEVICE(0x04d8, 0x000c), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Samsung Android phone modem - ID conflict with SPH-I500 */
{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
dev_err(dev, "missing IRQ\n");
return -ENODEV;
}
- dwc->xhci_resources[1] = *res;
+ dwc->xhci_resources[1].start = res->start;
+ dwc->xhci_resources[1].end = res->end;
+ dwc->xhci_resources[1].flags = res->flags;
+ dwc->xhci_resources[1].name = res->name;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory resource\n");
return -ENODEV;
}
- dwc->xhci_resources[0] = *res;
+ dwc->xhci_resources[0].start = res->start;
dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
DWC3_XHCI_REGS_END;
+ dwc->xhci_resources[0].flags = res->flags;
+ dwc->xhci_resources[0].name = res->name;
/*
* Request memory region but exclude xHCI regs,
transferred = min_t(u32, ur->length,
transfer_size - length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
- dwc->ep0_bounced = false;
} else {
transferred = ur->length - length;
}
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- usb_gadget_unmap_request(&dwc->gadget, &req->request,
- req->direction);
+ if (dwc->ep0_bounced && dep->number == 0)
+ dwc->ep0_bounced = false;
+ else
+ usb_gadget_unmap_request(&dwc->gadget, &req->request,
+ req->direction);
dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
req, dep->name, req->request.actual,
if (list_empty(&dep->request_list)) {
dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
dep->name);
+ dep->flags |= DWC3_EP_PENDING_REQUEST;
return;
}
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
int ret;
+ /*
+ * If xfernotready is already elapsed and it is a case
+ * of isoc transfer, then issue END TRANSFER, so that
+ * you can receive xfernotready again and can have
+ * notion of current microframe.
+ */
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ dwc3_stop_active_transfer(dwc, dep->number);
+ return 0;
+ }
+
ret = __dwc3_gadget_kick_transfer(dep, 0, true);
if (ret && ret != -EBUSY) {
struct dwc3 *dwc = dep->dwc;
unsigned long flags;
if (!_ep || !ep
- || !desc || ep->ep.desc
- || _ep->name == ep0name
+ || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| (maxpacket = usb_endpoint_maxp(desc)) == 0
|| maxpacket > ep->maxpacket) {
tmp |= AT91_UDP_EPEDS;
__raw_writel(tmp, ep->creg);
- ep->ep.desc = desc;
ep->ep.maxpacket = maxpacket;
/*
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
udc->gadget.dev.of_node = udc->pdev->dev.of_node;
- dev_set_drvdata(&udc->gadget.dev, &driver->driver);
udc->enabled = 1;
udc->selfpowered = 1;
spin_unlock_irqrestore(&udc->lock, flags);
udc->gadget.dev.driver = NULL;
- dev_set_drvdata(&udc->gadget.dev, NULL);
udc->driver = NULL;
DBG("unbound from %s\n", driver->driver.name);
return retval;
}
+/* usb 3.0 root hub device descriptor */
+struct {
+ struct usb_bos_descriptor bos;
+ struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+ .bos = {
+ .bLength = USB_DT_BOS_SIZE,
+ .bDescriptorType = USB_DT_BOS,
+ .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)),
+ .bNumDeviceCaps = 1,
+ },
+ .ss_cap = {
+ .bLength = USB_DT_USB_SS_CAP_SIZE,
+ .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
+ .bDevCapabilityType = USB_SS_CAP_TYPE,
+ .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION),
+ .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION),
+ },
+};
+
static inline void
ss_hub_descriptor(struct usb_hub_descriptor *desc)
{
else
hub_descriptor((struct usb_hub_descriptor *) buf);
break;
+
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ if (hcd->speed != HCD_USB3)
+ goto error;
+
+ if ((wValue >> 8) != USB_DT_BOS)
+ goto error;
+
+ memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+ retval = sizeof(usb3_bos_desc);
+ break;
+
case GetHubStatus:
*(__le32 *) buf = cpu_to_le32(0);
break;
hs_hcd->has_tt = 1;
retval = usb_add_hcd(hs_hcd, 0, 0);
- if (retval != 0) {
- usb_put_hcd(hs_hcd);
- return retval;
- }
+ if (retval)
+ goto put_usb2_hcd;
if (mod_data.is_super_speed) {
ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
put_usb3_hcd:
usb_put_hcd(ss_hcd);
dealloc_usb2_hcd:
+ usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
usb_put_hcd(hs_hcd);
the_controller.hs_hcd = the_controller.ss_hcd = NULL;
return retval;
/* Debugging ****************************************************************/
#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
# define pr_vdebug pr_debug
+#endif /* pr_vdebug */
# define ffs_dump_mem(prefix, ptr, len) \
print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
#else
+#ifndef pr_vdebug
# define pr_vdebug(...) do { } while (0)
+#endif /* pr_vdebug */
# define ffs_dump_mem(prefix, ptr, len) do { } while (0)
#endif /* VERBOSE_DEBUG */
if (hsotg->num_of_eps == 0) {
dev_err(dev, "wrong number of EPs (zero)\n");
+ ret = -EINVAL;
goto err_supplies;
}
GFP_KERNEL);
if (!eps) {
dev_err(dev, "cannot get memory\n");
+ ret = -ENOMEM;
goto err_supplies;
}
GFP_KERNEL);
if (!hsotg->ctrl_req) {
dev_err(dev, "failed to allocate ctrl req\n");
+ ret = -ENOMEM;
goto err_ep_mem;
}
#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
#define pr_vdebug(fmt, arg...) \
pr_debug(fmt, ##arg)
+#endif /* pr_vdebug */
#else
+#ifndef pr_vdebig
#define pr_vdebug(fmt, arg...) \
({ if (0) pr_debug(fmt, ##arg); })
+#endif /* pr_vdebug */
#endif
/*-------------------------------------------------------------------------*/
else {
qtd = list_entry (qh->qtd_list.next,
struct ehci_qtd, qtd_list);
- /* first qtd may already be partially processed */
- if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
+ /*
+ * first qtd may already be partially processed.
+ * If we come here during unlink, the QH overlay region
+ * might have reference to the just unlinked qtd. The
+ * qtd is updated in qh_completions(). Update the QH
+ * overlay here.
+ */
+ if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+ qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
+ }
}
if (qtd)
if (pdata) {
at91_for_each_port(i) {
+ /*
+ * do not configure PIO if not in relation with
+ * real USB port on board
+ */
+ if (i >= pdata->ports) {
+ pdata->vbus_pin[i] = -EINVAL;
+ pdata->overcurrent_pin[i] = -EINVAL;
+ break;
+ }
+
if (!gpio_is_valid(pdata->vbus_pin[i]))
continue;
gpio = pdata->vbus_pin[i];
#define NB_PIF0_PWRDOWN_1 0x01100013
#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
static struct amd_chipset_info {
struct pci_dev *nb_dev;
return;
}
- ports_available = 0xffffffff;
+ /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+ * Indicate the ports that can be changed from OS.
+ */
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+ ports_available);
+
/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
- * Register, to turn on SuperSpeed terminations for all
- * available ports.
+ * Register, to turn on SuperSpeed terminations for the
+ * switchable ports.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
cpu_to_le32(ports_available));
dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
"under xHCI: 0x%x\n", ports_available);
- ports_available = 0xffffffff;
+ /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+ * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+ */
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+ ports_available);
+
/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
* switch the USB 2.0 power and data lines over to the xHCI
* host.
void __iomem *op_reg_base;
u32 val;
int timeout;
+ int len = pci_resource_len(pdev, 0);
if (!mmio_resource_enabled(pdev, 0))
return;
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ base = ioremap_nocache(pci_resource_start(pdev, 0), len);
if (base == NULL)
return;
*/
ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
do {
+ if ((ext_cap_offset + sizeof(val)) > len) {
+ /* We're reading garbage from the controller */
+ dev_warn(&pdev->dev,
+ "xHCI controller failing to respond");
+ return;
+ }
+
if (!ext_cap_offset)
/* We've reached the end of the extended capabilities */
goto hc_init;
+
val = readl(base + ext_cap_offset);
if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
break;
/* Disable any BIOS SMIs and clear all SMI events*/
writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+hc_init:
if (usb_is_intel_switchable_xhci(pdev))
usb_enable_xhci_ports(pdev);
-hc_init:
+
op_reg_base = base + XHCI_HC_LENGTH(readl(base));
/* Wait for the host controller to be ready before writing any
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
* when this bit is set.
*/
pls |= USB_PORT_STAT_CONNECTION;
+ } else {
+ /*
+ * If CAS bit isn't set but the Port is already at
+ * Compliance Mode, fake a connection so the USB core
+ * notices the Compliance state and resets the port.
+ * This resolves an issue generated by the SN65LVPE502CP
+ * in which sometimes the port enters compliance mode
+ * caused by a delay on the host-device negotiation.
+ */
+ if (pls == USB_SS_PORT_LS_COMP_MOD)
+ pls |= USB_PORT_STAT_CONNECTION;
}
+
/* update status field */
*status |= pls;
}
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+ u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+ bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+ if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+ return;
+
+ if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+ xhci->port_status_u0 |= 1 << wIndex;
+ if (xhci->port_status_u0 == all_ports_seen_u0) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+ }
+ }
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(&status, temp);
+ /*
+ * Verify if all USB3 Ports Have entered U0 already.
+ * Delete Compliance Mode Timer if so.
+ */
+ xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
goto put_hcd;
}
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "error mapping memory\n");
ret = -EFAULT;
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
+#include <linux/dmi.h>
#include "xhci.h"
#endif
+static void compliance_mode_recovery(unsigned long arg)
+{
+ struct xhci_hcd *xhci;
+ struct usb_hcd *hcd;
+ u32 temp;
+ int i;
+
+ xhci = (struct xhci_hcd *)arg;
+
+ for (i = 0; i < xhci->num_usb3_ports; i++) {
+ temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+ if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+ /*
+ * Compliance Mode Detected. Letting USB Core
+ * handle the Warm Reset
+ */
+ xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+ i + 1);
+ xhci_dbg(xhci, "Attempting Recovery routine!\n");
+ hcd = xhci->shared_hcd;
+
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ usb_hcd_poll_rh_status(hcd);
+ }
+ }
+
+ if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+ mod_timer(&xhci->comp_mode_recovery_timer,
+ jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+ xhci->port_status_u0 = 0;
+ init_timer(&xhci->comp_mode_recovery_timer);
+
+ xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+ xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+ xhci->comp_mode_recovery_timer.expires = jiffies +
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+ set_timer_slack(&xhci->comp_mode_recovery_timer,
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+ add_timer(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+ const char *dmi_product_name, *dmi_sys_vendor;
+
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+ if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+ return false;
+
+ if (strstr(dmi_product_name, "Z420") ||
+ strstr(dmi_product_name, "Z620") ||
+ strstr(dmi_product_name, "Z820"))
+ return true;
+
+ return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+ return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
/*
* Initialize memory for HCD and xHC (one-time init).
*
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");
+ /* Initializing Compliance Mode Recovery Data If Needed */
+ if (compliance_mode_recovery_timer_quirk_check()) {
+ xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+ compliance_mode_recovery_timer_init(xhci);
+ }
+
return retval;
}
del_timer_sync(&xhci->event_ring_timer);
#endif
+ /* Deleting Compliance Mode Recovery Timer */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci))))
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_dev_put();
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+ if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
spin_lock_irq(&xhci->lock);
}
spin_unlock_irq(&xhci->lock);
+ /*
+ * Deleting Compliance Mode Recovery Timer because the xHCI Host
+ * is about to be suspended.
+ */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci)))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+ }
+
/* step 5: remove core well power */
/* synchronize irq when using MSI-X */
xhci_msix_sync_irqs(xhci);
usb_hcd_resume_root_hub(hcd);
usb_hcd_resume_root_hub(xhci->shared_hcd);
}
+
+ /*
+ * If system is subject to the Quirk, Compliance Mode Timer needs to
+ * be re-initialized Always after a system resume. Ports are subject
+ * to suffer the Compliance Mode issue again. It doesn't matter if
+ * ports have entered previously to U0 before system's suspension.
+ */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ compliance_mode_recovery_timer_init(xhci);
+
return retval;
}
#endif /* CONFIG_PM */
#define XHCI_LPM_SUPPORT (1 << 11)
#define XHCI_INTEL_HOST (1 << 12)
#define XHCI_SPURIOUS_REBOOT (1 << 13)
+#define XHCI_COMP_MODE_QUIRK (1 << 14)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
unsigned hw_lpm_support:1;
+ /* Compliance Mode Recovery Data */
+ struct timer_list comp_mode_recovery_timer;
+ u32 port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
* we only have work to do in the former case.
*/
spin_lock_irqsave(&musb->lock, flags);
- if (hep->hcpriv) {
+ if (hep->hcpriv || !next_urb(qh)) {
/* some concurrent activity submitted another urb to hep...
* odd, rare, error prone, but legal.
*/
struct platform_device *pdev = to_platform_device(dev);
int irq = platform_get_irq_byname(pdev, "dma");
- if (irq == 0) {
+ if (irq <= 0) {
dev_err(dev, "No DMA interrupt line!\n");
return NULL;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err1;
+ goto err2;
}
return 0;
usbhs_pipe_is_dcp(pipe))
goto usbhsf_pio_prepare_push;
- if (len % 4) /* 32bit alignment */
+ if (len & 0x7) /* 8byte alignment */
goto usbhsf_pio_prepare_push;
if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
/* use PIO if packet is less than pio_dma_border */
len = usbhsf_fifo_rcv_len(priv, fifo);
len = min(pkt->length - pkt->actual, len);
- if (len % 4) /* 32bit alignment */
+ if (len & 0x7) /* 8byte alignment */
goto usbhsf_pio_prepare_pop_unselect;
if (len < usbhs_get_dparam(priv, pio_dma_border))
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+ USB_CLASS_VENDOR_SPEC,
+ USB_SUBCLASS_VENDOR_SPEC, 0x00) },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C865_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C857_PID) },
+ { USB_DEVICE(PI_VID, PI_C866_PID) },
+ { USB_DEVICE(PI_VID, PI_C663_PID) },
+ { USB_DEVICE(PI_VID, PI_C725_PID) },
+ { USB_DEVICE(PI_VID, PI_E517_PID) },
+ { USB_DEVICE(PI_VID, PI_C863_PID) },
{ USB_DEVICE(PI_VID, PI_E861_PID) },
+ { USB_DEVICE(PI_VID, PI_C867_PID) },
+ { USB_DEVICE(PI_VID, PI_E609_PID) },
+ { USB_DEVICE(PI_VID, PI_E709_PID) },
+ { USB_DEVICE(PI_VID, PI_100F_PID) },
+ { USB_DEVICE(PI_VID, PI_1011_PID) },
+ { USB_DEVICE(PI_VID, PI_1012_PID) },
+ { USB_DEVICE(PI_VID, PI_1013_PID) },
+ { USB_DEVICE(PI_VID, PI_1014_PID) },
+ { USB_DEVICE(PI_VID, PI_1015_PID) },
+ { USB_DEVICE(PI_VID, PI_1016_PID) },
{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
#define FTDI_OPENDCC_GBM_PID 0xBFDC
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */
+
/*
* RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
*/
/*
* Microchip Technology, Inc.
*
- * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications. The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
* Hornby Elite - Digital Command Control Console
* http://www.hornby.com/hornby-dcc/controllers/
*/
* Physik Instrumente
* http://www.physikinstrumente.com/en/products/
*/
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */
+
#define PI_VID 0x1a72 /* Vendor ID */
-#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */
+#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */
+#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID 0x1007 /* PI C-863 */
+#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */
+#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */
+#define PI_1012_PID 0x1012 /* PI Motion Controller */
+#define PI_1013_PID 0x1013 /* PI Motion Controller */
+#define PI_1014_PID 0x1014 /* PI Device */
+#define PI_1015_PID 0x1015 /* PI Device */
+#define PI_1016_PID 0x1016 /* PI Digital Servo Module */
/*
* Kondo Kagaku Co.Ltd.
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
.driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
if (srcid) {
srcgroup = find_qgroup_rb(fs_info, srcid);
- if (!srcgroup) {
- ret = -EINVAL;
+ if (!srcgroup)
goto unlock;
- }
dstgroup->rfer = srcgroup->rfer - level_size;
dstgroup->rfer_cmpr = srcgroup->rfer_cmpr - level_size;
srcgroup->excl = level_size;
qgroup_dirty(fs_info, srcgroup);
}
- if (!inherit) {
- ret = -EINVAL;
+ if (!inherit)
goto unlock;
- }
i_qgroups = (u64 *)(inherit + 1);
for (i = 0; i < inherit->num_qgroups; ++i) {
static int ecryptfs_flush(struct file *file, fl_owner_t td)
{
- return file->f_mode & FMODE_WRITE
- ? filemap_write_and_wait(file->f_mapping) : 0;
+ struct file *lower_file = ecryptfs_file_to_lower(file);
+
+ if (lower_file->f_op && lower_file->f_op->flush) {
+ filemap_write_and_wait(file->f_mapping);
+ return lower_file->f_op->flush(lower_file, td);
+ }
+
+ return 0;
}
static int ecryptfs_release(struct inode *inode, struct file *file)
struct dentry *lower_old_dir_dentry;
struct dentry *lower_new_dir_dentry;
struct dentry *trap = NULL;
+ struct inode *target_inode;
lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
dget(lower_new_dentry);
lower_old_dir_dentry = dget_parent(lower_old_dentry);
lower_new_dir_dentry = dget_parent(lower_new_dentry);
+ target_inode = new_dentry->d_inode;
trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
/* source should not be ancestor of target */
if (trap == lower_old_dentry) {
lower_new_dir_dentry->d_inode, lower_new_dentry);
if (rc)
goto out_lock;
+ if (target_inode)
+ fsstack_copy_attr_all(target_inode,
+ ecryptfs_inode_to_lower(target_inode));
fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode);
if (new_dir != old_dir)
fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode);
inode_info = ecryptfs_inode_to_private(inode);
if (atomic_dec_and_mutex_lock(&inode_info->lower_file_count,
&inode_info->lower_file_mutex)) {
+ filemap_write_and_wait(inode->i_mapping);
fput(inode_info->lower_file);
inode_info->lower_file = NULL;
mutex_unlock(&inode_info->lower_file_mutex);
return -ENOTTY;
}
+/**
+ * gfs2_size_hint - Give a hint to the size of a write request
+ * @file: The struct file
+ * @offset: The file offset of the write
+ * @size: The length of the write
+ *
+ * When we are about to do a write, this function records the total
+ * write size in order to provide a suitable hint to the lower layers
+ * about how many blocks will be required.
+ *
+ */
+
+static void gfs2_size_hint(struct file *filep, loff_t offset, size_t size)
+{
+ struct inode *inode = filep->f_dentry->d_inode;
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *ip = GFS2_I(inode);
+ size_t blks = (size + sdp->sd_sb.sb_bsize - 1) >> sdp->sd_sb.sb_bsize_shift;
+ int hint = min_t(size_t, INT_MAX, blks);
+
+ atomic_set(&ip->i_res->rs_sizehint, hint);
+}
+
/**
* gfs2_allocate_page_backing - Use bmap to allocate blocks
* @page: The (locked) page to allocate backing for
if (ret)
return ret;
- atomic_set(&ip->i_res->rs_sizehint,
- PAGE_CACHE_SIZE >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(vma->vm_file, pos, PAGE_CACHE_SIZE);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret)
return ret;
- atomic_set(&ip->i_res->rs_sizehint, writesize >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(file, pos, writesize);
+
if (file->f_flags & O_APPEND) {
struct gfs2_holder gh;
if (unlikely(error))
goto out_uninit;
- atomic_set(&ip->i_res->rs_sizehint, len >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(file, offset, len);
while (len > 0) {
if (len < bytes)
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret == 0) {
- ret = generic_setxattr(dentry, name, data, size, flags);
+ ret = gfs2_rs_alloc(ip);
+ if (ret == 0)
+ ret = generic_setxattr(dentry, name, data, size, flags);
gfs2_glock_dq(&gh);
}
gfs2_holder_uninit(&gh);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret == 0) {
- ret = generic_removexattr(dentry, name);
+ ret = gfs2_rs_alloc(ip);
+ if (ret == 0)
+ ret = generic_removexattr(dentry, name);
gfs2_glock_dq(&gh);
}
gfs2_holder_uninit(&gh);
* @dinode: 1 if this block is a dinode block, otherwise data block
* @nblocks: desired extent length
*
- * Lay claim to previously allocated block reservation blocks.
+ * Lay claim to previously reserved blocks.
* Returns: Starting block number of the blocks claimed.
* Sets *nblocks to the actual extent length allocated.
*/
{
struct gfs2_blkreserv *rs = ip->i_res;
struct gfs2_rgrpd *rgd = rs->rs_rgd;
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_bitmap *bi;
u64 start_block = gfs2_rs_startblk(rs);
const unsigned int elen = *nblocks;
- /*BUG_ON(!gfs2_glock_is_locked_by_me(ip->i_gl));*/
- gfs2_assert_withdraw(sdp, rgd);
- /*BUG_ON(!gfs2_glock_is_locked_by_me(rgd->rd_gl));*/
bi = rs->rs_bi;
gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
for (*nblocks = 0; *nblocks < elen && rs->rs_free; (*nblocks)++) {
- /* Make sure the bitmap hasn't changed */
+ if (gfs2_testbit(rgd, bi->bi_bh->b_data + bi->bi_offset,
+ bi->bi_len, rs->rs_biblk) != GFS2_BLKST_FREE)
+ break;
gfs2_setbit(rgd, bi->bi_clone, bi, rs->rs_biblk,
dinode ? GFS2_BLKST_DINODE : GFS2_BLKST_USED);
rs->rs_biblk++;
BUG_ON(!rgd->rd_reserved);
rgd->rd_reserved--;
dinode = false;
- trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM);
}
- if (!rs->rs_free) {
- struct gfs2_rgrpd *rgd = ip->i_res->rs_rgd;
-
+ trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM);
+ if (!rs->rs_free || *nblocks != elen)
gfs2_rs_deltree(rs);
- /* -nblocks because we haven't returned to do the math yet.
- I'm doing the math backwards to prevent negative numbers,
- but think of it as:
- if (unclaimed_blocks(rgd) - *nblocks >= RGRP_RSRV_MINBLKS */
- if (unclaimed_blocks(rgd) >= RGRP_RSRV_MINBLKS + *nblocks)
- rg_mblk_search(rgd, ip);
- }
+
return start_block;
}
if (ip->i_res->rs_requested == 0)
return -ECANCELED;
- /* Check if we have a multi-block reservation, and if so, claim the
- next free block from it. */
+ /* If we have a reservation, claim blocks from it. */
if (gfs2_rs_active(ip->i_res)) {
BUG_ON(!ip->i_res->rs_free);
rgd = ip->i_res->rs_rgd;
block = claim_reserved_blks(ip, dinode, nblocks);
- } else {
- rgd = ip->i_rgd;
+ if (*nblocks)
+ goto found_blocks;
+ }
- if (!dinode && rgrp_contains_block(rgd, ip->i_goal))
- goal = ip->i_goal - rgd->rd_data0;
- else
- goal = rgd->rd_last_alloc;
-
- blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi);
-
- /* Since all blocks are reserved in advance, this shouldn't
- happen */
- if (blk == BFITNOENT) {
- printk(KERN_WARNING "BFITNOENT, nblocks=%u\n",
- *nblocks);
- printk(KERN_WARNING "FULL=%d\n",
- test_bit(GBF_FULL, &rgd->rd_bits->bi_flags));
- goto rgrp_error;
- }
+ rgd = ip->i_rgd;
- block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks);
+ if (!dinode && rgrp_contains_block(rgd, ip->i_goal))
+ goal = ip->i_goal - rgd->rd_data0;
+ else
+ goal = rgd->rd_last_alloc;
+
+ blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi);
+
+ /* Since all blocks are reserved in advance, this shouldn't happen */
+ if (blk == BFITNOENT) {
+ printk(KERN_WARNING "BFITNOENT, nblocks=%u\n", *nblocks);
+ printk(KERN_WARNING "FULL=%d\n",
+ test_bit(GBF_FULL, &rgd->rd_bits->bi_flags));
+ goto rgrp_error;
}
+
+ block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks);
+found_blocks:
ndata = *nblocks;
if (dinode)
ndata--;
struct inode *inode = file->f_path.dentry->d_inode;
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+ if (ret != 0)
+ goto out;
mutex_lock(&inode->i_mutex);
ret = nfs_file_fsync_commit(file, start, end, datasync);
mutex_unlock(&inode->i_mutex);
-
+out:
return ret;
}
nfsi->attrtimeo = NFS_MINATTRTIMEO(inode);
nfsi->attrtimeo_timestamp = jiffies;
- memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode)));
+ memset(NFS_I(inode)->cookieverf, 0, sizeof(NFS_I(inode)->cookieverf));
if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))
nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
else
u64 cookie, struct page **pages, unsigned int count, int plus)
{
struct inode *dir = dentry->d_inode;
- __be32 *verf = NFS_COOKIEVERF(dir);
+ __be32 *verf = NFS_I(dir)->cookieverf;
struct nfs3_readdirargs arg = {
.fh = NFS_FH(dir),
.cookie = cookie,
struct inode *inode = file->f_path.dentry->d_inode;
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+ if (ret != 0)
+ goto out;
mutex_lock(&inode->i_mutex);
ret = nfs_file_fsync_commit(file, start, end, datasync);
if (!ret && !datasync)
/* application has asked for meta-data sync */
ret = pnfs_layoutcommit_inode(inode, true);
mutex_unlock(&inode->i_mutex);
-
+out:
return ret;
}
dentry->d_parent->d_name.name,
dentry->d_name.name,
(unsigned long long)cookie);
- nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
+ nfs4_setup_readdir(cookie, NFS_I(dir)->cookieverf, dentry, &args);
res.pgbase = args.pgbase;
status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &msg, &args.seq_args, &res.seq_res, 0);
if (status >= 0) {
- memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+ memcpy(NFS_I(dir)->cookieverf, res.verifier.data, NFS4_VERIFIER_SIZE);
status += args.pgbase;
}
&& (server->acl_bitmask & ACL4_SUPPORT_DENY_ACL);
}
-/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_CACHE_SIZE, and that
- * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_CACHE_SIZE) bytes on
+/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_SIZE, and that
+ * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_SIZE) bytes on
* the stack.
*/
-#define NFS4ACL_MAXPAGES (XATTR_SIZE_MAX >> PAGE_CACHE_SHIFT)
+#define NFS4ACL_MAXPAGES DIV_ROUND_UP(XATTR_SIZE_MAX, PAGE_SIZE)
static int buf_to_pages_noslab(const void *buf, size_t buflen,
struct page **pages, unsigned int *pgbase)
spages = pages;
do {
- len = min_t(size_t, PAGE_CACHE_SIZE, buflen);
+ len = min_t(size_t, PAGE_SIZE, buflen);
newpage = alloc_page(GFP_KERNEL);
if (newpage == NULL)
struct nfs4_cached_acl *acl;
size_t buflen = sizeof(*acl) + acl_len;
- if (pages && buflen <= PAGE_SIZE) {
+ if (buflen <= PAGE_SIZE) {
acl = kmalloc(buflen, GFP_KERNEL);
if (acl == NULL)
goto out;
.rpc_argp = &args,
.rpc_resp = &res,
};
- int ret = -ENOMEM, npages, i;
- size_t acl_len = 0;
+ unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE);
+ int ret = -ENOMEM, i;
- npages = (buflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
/* As long as we're doing a round trip to the server anyway,
* let's be prepared for a page of acl data. */
if (npages == 0)
npages = 1;
-
- /* Add an extra page to handle the bitmap returned */
- npages++;
+ if (npages > ARRAY_SIZE(pages))
+ return -ERANGE;
for (i = 0; i < npages; i++) {
pages[i] = alloc_page(GFP_KERNEL);
args.acl_len = npages * PAGE_SIZE;
args.acl_pgbase = 0;
- /* Let decode_getfacl know not to fail if the ACL data is larger than
- * the page we send as a guess */
- if (buf == NULL)
- res.acl_flags |= NFS4_ACL_LEN_REQUEST;
-
dprintk("%s buf %p buflen %zu npages %d args.acl_len %zu\n",
__func__, buf, buflen, npages, args.acl_len);
ret = nfs4_call_sync(NFS_SERVER(inode)->client, NFS_SERVER(inode),
if (ret)
goto out_free;
- acl_len = res.acl_len;
- if (acl_len > args.acl_len)
- nfs4_write_cached_acl(inode, NULL, 0, acl_len);
- else
- nfs4_write_cached_acl(inode, pages, res.acl_data_offset,
- acl_len);
- if (buf) {
+ /* Handle the case where the passed-in buffer is too short */
+ if (res.acl_flags & NFS4_ACL_TRUNC) {
+ /* Did the user only issue a request for the acl length? */
+ if (buf == NULL)
+ goto out_ok;
ret = -ERANGE;
- if (acl_len > buflen)
- goto out_free;
- _copy_from_pages(buf, pages, res.acl_data_offset,
- acl_len);
+ goto out_free;
}
- ret = acl_len;
+ nfs4_write_cached_acl(inode, pages, res.acl_data_offset, res.acl_len);
+ if (buf)
+ _copy_from_pages(buf, pages, res.acl_data_offset, res.acl_len);
+out_ok:
+ ret = res.acl_len;
out_free:
for (i = 0; i < npages; i++)
if (pages[i])
.rpc_argp = &arg,
.rpc_resp = &res,
};
+ unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE);
int ret, i;
if (!nfs4_server_supports_acls(server))
return -EOPNOTSUPP;
+ if (npages > ARRAY_SIZE(pages))
+ return -ERANGE;
i = buf_to_pages_noslab(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
if (i < 0)
return i;
* are stored with the acl data to handle the problem of
* variable length bitmaps.*/
res->acl_data_offset = xdr_stream_pos(xdr) - pg_offset;
-
- /* We ignore &savep and don't do consistency checks on
- * the attr length. Let userspace figure it out.... */
res->acl_len = attrlen;
- if (attrlen > (xdr->nwords << 2)) {
- if (res->acl_flags & NFS4_ACL_LEN_REQUEST) {
- /* getxattr interface called with a NULL buf */
- goto out;
- }
+
+ /* Check for receive buffer overflow */
+ if (res->acl_len > (xdr->nwords << 2) ||
+ res->acl_len + res->acl_data_offset > xdr->buf->page_len) {
+ res->acl_flags |= NFS4_ACL_TRUNC;
dprintk("NFS: acl reply: attrlen %u > page_len %u\n",
attrlen, xdr->nwords << 2);
- return -EINVAL;
}
} else
status = -EOPNOTSUPP;
status = decode_open(xdr, res);
if (status)
goto out;
- if (decode_getfh(xdr, &res->fh) != 0)
+ status = decode_getfh(xdr, &res->fh);
+ if (status)
goto out;
decode_getfattr(xdr, res->f_attr, res->server);
out:
memcpy(sap, &data->addr, sizeof(data->addr));
args->nfs_server.addrlen = sizeof(data->addr);
+ args->nfs_server.port = ntohs(data->addr.sin_port);
if (!nfs_verify_server_address(sap))
goto out_no_address;
return -EFAULT;
if (!nfs_verify_server_address(sap))
goto out_no_address;
+ args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port);
if (data->auth_flavourlen) {
if (data->auth_flavourlen > 1)
int vfs_fstat(unsigned int fd, struct kstat *stat)
{
int fput_needed;
- struct file *f = fget_light(fd, &fput_needed);
+ struct file *f = fget_raw_light(fd, &fput_needed);
int error = -EBADF;
if (f) {
#include <linux/platform_device.h>
#include <linux/list.h>
+#include <linux/io.h>
struct ssc_device {
struct list_head list;
struct timer_list timer; /* Timeout */
u8 * buf; /* Data buffer */
int len; /* Length of data buffer */
+ int order; /* RX Bytes to order via TX */
};
struct i2c_pnx_algo_data {
static inline __printf(2, 3)
int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
-{ return 0; }
+{ return -ENOMEM; }
static inline int kobject_action_type(const char *buf, size_t count,
enum kobject_action *type)
unsigned short);
extern int mISDN_freedchannel(struct dchannel *);
extern void mISDN_clear_bchannel(struct bchannel *);
-extern int mISDN_freebchannel(struct bchannel *);
+extern void mISDN_freebchannel(struct bchannel *);
extern int mISDN_ctrl_bchannel(struct bchannel *, struct mISDN_ctrl_req *);
extern void queue_ch_frame(struct mISDNchannel *, u_int,
int, struct sk_buff *);
#include <linux/platform_device.h>
+struct irq_domain;
+
/*
* This struct describes the MFD part ("cell").
* After registration the copy of this structure will become the platform data
extern int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
- int irq_base);
+ int irq_base, struct irq_domain *irq_domain);
extern void mfd_remove_devices(struct device *parent);
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+/* TPS chip id list */
+#define TPS65217 0xF0
+
/* I2C ID for TPS65217 part */
#define TPS65217_I2C_ID 0x24
struct tps65217 {
struct device *dev;
struct tps65217_board *pdata;
+ unsigned int id;
struct regulator_desc desc[TPS65217_NUM_REGULATOR];
struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
struct tps_info *info[TPS65217_NUM_REGULATOR];
struct regmap *regmap;
-
- /* Client devices */
- struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
};
static inline struct tps65217 *dev_to_tps65217(struct device *dev)
return dev_get_drvdata(dev);
}
+static inline int tps65217_chip_id(struct tps65217 *tps65217)
+{
+ return tps65217->id;
+}
+
int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
unsigned int *val);
int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
MLX4_NET_TRANS_RULE_NUM, /* should be last */
};
+extern const u16 __sw_id_hw[];
+
+static inline int map_hw_to_sw_id(u16 header_id)
+{
+
+ int i;
+ for (i = 0; i < MLX4_NET_TRANS_RULE_NUM; i++) {
+ if (header_id == __sw_id_hw[i])
+ return i;
+ }
+ return -EINVAL;
+}
+
enum mlx4_net_trans_promisc_mode {
MLX4_FS_PROMISC_NONE = 0,
MLX4_FS_PROMISC_UPLINK,
return NFS_SERVER(inode)->nfs_client->rpc_ops;
}
-static inline __be32 *NFS_COOKIEVERF(const struct inode *inode)
-{
- return NFS_I(inode)->cookieverf;
-}
-
static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode)
{
struct nfs_server *nfss = NFS_SERVER(inode);
};
/* getxattr ACL interface flags */
-#define NFS4_ACL_LEN_REQUEST 0x0001 /* zero length getxattr buffer */
+#define NFS4_ACL_TRUNC 0x0001 /* ACL was truncated */
struct nfs_getaclres {
size_t acl_len;
size_t acl_data_offset;
struct hw_perf_event hw;
struct perf_event_context *ctx;
- struct file *filp;
+ atomic_long_t refcount;
/*
* These accumulate total time (in nanoseconds) that children
extern void perf_swevent_put_recursion_context(int rctx);
extern void perf_event_enable(struct perf_event *event);
extern void perf_event_disable(struct perf_event *event);
+extern int __perf_event_disable(void *info);
extern void perf_event_task_tick(void);
#else
static inline void
static inline void perf_swevent_put_recursion_context(int rctx) { }
static inline void perf_event_enable(struct perf_event *event) { }
static inline void perf_event_disable(struct perf_event *event) { }
+static inline int __perf_event_disable(void *info) { return -1; }
static inline void perf_event_task_tick(void) { }
#endif
unsigned int smt_gain;
int flags; /* See SD_* */
int level;
- int idle_buddy; /* cpu assigned to select_idle_sibling() */
/* Runtime fields. */
unsigned long last_balance; /* init to jiffies. units in jiffies */
void (*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
int (*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+ void (*alloc_slot)(struct rpc_xprt *xprt, struct rpc_task *task);
void (*rpcbind)(struct rpc_task *task);
void (*set_port)(struct rpc_xprt *xprt, unsigned short port);
void (*connect)(struct rpc_task *task);
void xprt_reserve(struct rpc_task *task);
int xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
int xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
int xprt_prepare_transmit(struct rpc_task *task);
void xprt_transmit(struct rpc_task *task);
void xprt_end_transmit(struct rpc_task *task);
};
/* SMP Commands */
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level);
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level);
int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb);
int smp_distribute_keys(struct l2cap_conn *conn, __u8 force);
int smp_user_confirm_reply(struct hci_conn *conn, u16 mgmt_op, __le32 passkey);
int (*check)(struct xfrm_state *x,
struct sk_buff *skb,
__be32 net_seq);
+ int (*recheck)(struct xfrm_state *x,
+ struct sk_buff *skb,
+ __be32 net_seq);
void (*notify)(struct xfrm_state *x, int event);
int (*overflow)(struct xfrm_state *x, struct sk_buff *skb);
};
struct se_device *(*create_virtdevice)(struct se_hba *,
struct se_subsystem_dev *, void *);
void (*free_device)(void *);
- int (*transport_complete)(struct se_cmd *cmd, struct scatterlist *);
+ void (*transport_complete)(struct se_cmd *cmd,
+ struct scatterlist *,
+ unsigned char *);
int (*parse_cdb)(struct se_cmd *cmd);
ssize_t (*check_configfs_dev_params)(struct se_hba *,
#define SE_INQUIRY_BUF 512
#define SE_MODE_PAGE_BUF 512
+#define SE_SENSE_BUF 96
/* struct se_hba->hba_flags */
enum hba_flags_table {
/*
* Cross CPU call to disable a performance event
*/
-static int __perf_event_disable(void *info)
+int __perf_event_disable(void *info)
{
struct perf_event *event = info;
struct perf_event_context *ctx = event->ctx;
/*
* Called when the last reference to the file is gone.
*/
-static int perf_release(struct inode *inode, struct file *file)
+static void put_event(struct perf_event *event)
{
- struct perf_event *event = file->private_data;
struct task_struct *owner;
- file->private_data = NULL;
+ if (!atomic_long_dec_and_test(&event->refcount))
+ return;
rcu_read_lock();
owner = ACCESS_ONCE(event->owner);
put_task_struct(owner);
}
- return perf_event_release_kernel(event);
+ perf_event_release_kernel(event);
+}
+
+static int perf_release(struct inode *inode, struct file *file)
+{
+ put_event(file->private_data);
+ return 0;
}
u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running)
static const struct file_operations perf_fops;
-static struct perf_event *perf_fget_light(int fd, int *fput_needed)
+static struct file *perf_fget_light(int fd, int *fput_needed)
{
struct file *file;
return ERR_PTR(-EBADF);
}
- return file->private_data;
+ return file;
}
static int perf_event_set_output(struct perf_event *event,
case PERF_EVENT_IOC_SET_OUTPUT:
{
+ struct file *output_file = NULL;
struct perf_event *output_event = NULL;
int fput_needed = 0;
int ret;
if (arg != -1) {
- output_event = perf_fget_light(arg, &fput_needed);
- if (IS_ERR(output_event))
- return PTR_ERR(output_event);
+ output_file = perf_fget_light(arg, &fput_needed);
+ if (IS_ERR(output_file))
+ return PTR_ERR(output_file);
+ output_event = output_file->private_data;
}
ret = perf_event_set_output(event, output_event);
if (output_event)
- fput_light(output_event->filp, fput_needed);
+ fput_light(output_file, fput_needed);
return ret;
}
mutex_init(&event->mmap_mutex);
+ atomic_long_set(&event->refcount, 1);
event->cpu = cpu;
event->attr = *attr;
event->group_leader = group_leader;
return event_fd;
if (group_fd != -1) {
- group_leader = perf_fget_light(group_fd, &fput_needed);
- if (IS_ERR(group_leader)) {
- err = PTR_ERR(group_leader);
+ group_file = perf_fget_light(group_fd, &fput_needed);
+ if (IS_ERR(group_file)) {
+ err = PTR_ERR(group_file);
goto err_fd;
}
- group_file = group_leader->filp;
+ group_leader = group_file->private_data;
if (flags & PERF_FLAG_FD_OUTPUT)
output_event = group_leader;
if (flags & PERF_FLAG_FD_NO_GROUP)
put_ctx(gctx);
}
- event->filp = event_file;
WARN_ON_ONCE(ctx->parent_ctx);
mutex_lock(&ctx->mutex);
goto err_free;
}
- event->filp = NULL;
WARN_ON_ONCE(ctx->parent_ctx);
mutex_lock(&ctx->mutex);
perf_install_in_context(ctx, event, cpu);
* Release the parent event, if this was the last
* reference to it.
*/
- fput(parent_event->filp);
+ put_event(parent_event);
}
static void
*
* __perf_event_exit_task()
* sync_child_event()
- * fput(parent_event->filp)
- * perf_release()
- * mutex_lock(&ctx->mutex)
+ * put_event()
+ * mutex_lock(&ctx->mutex)
*
* But since its the parent context it won't be the same instance.
*/
list_del_init(&event->child_list);
mutex_unlock(&parent->child_mutex);
- fput(parent->filp);
+ put_event(parent);
perf_group_detach(event);
list_del_event(event, ctx);
NULL, NULL);
if (IS_ERR(child_event))
return child_event;
+
+ if (!atomic_long_inc_not_zero(&parent_event->refcount)) {
+ free_event(child_event);
+ return NULL;
+ }
+
get_ctx(child_ctx);
/*
add_event_to_ctx(child_event, child_ctx);
raw_spin_unlock_irqrestore(&child_ctx->lock, flags);
- /*
- * Get a reference to the parent filp - we will fput it
- * when the child event exits. This is safe to do because
- * we are in the parent and we know that the filp still
- * exists and has a nonzero count:
- */
- atomic_long_inc(&parent_event->filp->f_count);
-
/*
* Link this into the parent event's child list
*/
int old_type = bp->attr.bp_type;
int err = 0;
- perf_event_disable(bp);
+ /*
+ * modify_user_hw_breakpoint can be invoked with IRQs disabled and hence it
+ * will not be possible to raise IPIs that invoke __perf_event_disable.
+ * So call the function directly after making sure we are targeting the
+ * current task.
+ */
+ if (irqs_disabled() && bp->ctx && bp->ctx->task == current)
+ __perf_event_disable(bp);
+ else
+ perf_event_disable(bp);
bp->attr.bp_addr = attr->bp_addr;
bp->attr.bp_type = attr->bp_type;
}
/*
- * While a dead CPU has no uninterruptible tasks queued at this point,
- * it might still have a nonzero ->nr_uninterruptible counter, because
- * for performance reasons the counter is not stricly tracking tasks to
- * their home CPUs. So we just add the counter to another CPU's counter,
- * to keep the global sum constant after CPU-down:
- */
-static void migrate_nr_uninterruptible(struct rq *rq_src)
-{
- struct rq *rq_dest = cpu_rq(cpumask_any(cpu_active_mask));
-
- rq_dest->nr_uninterruptible += rq_src->nr_uninterruptible;
- rq_src->nr_uninterruptible = 0;
-}
-
-/*
- * remove the tasks which were accounted by rq from calc_load_tasks.
+ * Since this CPU is going 'away' for a while, fold any nr_active delta
+ * we might have. Assumes we're called after migrate_tasks() so that the
+ * nr_active count is stable.
+ *
+ * Also see the comment "Global load-average calculations".
*/
-static void calc_global_load_remove(struct rq *rq)
+static void calc_load_migrate(struct rq *rq)
{
- atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
- rq->calc_load_active = 0;
+ long delta = calc_load_fold_active(rq);
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
}
/*
*/
rq->stop = NULL;
- /* Ensure any throttled groups are reachable by pick_next_task */
- unthrottle_offline_cfs_rqs(rq);
-
for ( ; ; ) {
/*
* There's this thread running, bail when that's the only
BUG_ON(rq->nr_running != 1); /* the migration thread */
raw_spin_unlock_irqrestore(&rq->lock, flags);
- migrate_nr_uninterruptible(rq);
- calc_global_load_remove(rq);
+ calc_load_migrate(rq);
break;
#endif
}
* SD_SHARE_PKG_RESOURCE set (Last Level Cache Domain) for this
* allows us to avoid some pointer chasing select_idle_sibling().
*
- * Iterate domains and sched_groups downward, assigning CPUs to be
- * select_idle_sibling() hw buddy. Cross-wiring hw makes bouncing
- * due to random perturbation self canceling, ie sw buddies pull
- * their counterpart to their CPU's hw counterpart.
- *
* Also keep a unique ID per domain (we use the first cpu number in
* the cpumask of the domain), this allows us to quickly tell if
* two cpus are in the same cache domain, see cpus_share_cache().
int id = cpu;
sd = highest_flag_domain(cpu, SD_SHARE_PKG_RESOURCES);
- if (sd) {
- struct sched_domain *tmp = sd;
- struct sched_group *sg, *prev;
- bool right;
-
- /*
- * Traverse to first CPU in group, and count hops
- * to cpu from there, switching direction on each
- * hop, never ever pointing the last CPU rightward.
- */
- do {
- id = cpumask_first(sched_domain_span(tmp));
- prev = sg = tmp->groups;
- right = 1;
-
- while (cpumask_first(sched_group_cpus(sg)) != id)
- sg = sg->next;
-
- while (!cpumask_test_cpu(cpu, sched_group_cpus(sg))) {
- prev = sg;
- sg = sg->next;
- right = !right;
- }
-
- /* A CPU went down, never point back to domain start. */
- if (right && cpumask_first(sched_group_cpus(sg->next)) == id)
- right = false;
-
- sg = right ? sg->next : prev;
- tmp->idle_buddy = cpumask_first(sched_group_cpus(sg));
- } while ((tmp = tmp->child));
-
+ if (sd)
id = cpumask_first(sched_domain_span(sd));
- }
rcu_assign_pointer(per_cpu(sd_llc, cpu), sd);
per_cpu(sd_llc_id, cpu) = id;
hrtimer_cancel(&cfs_b->slack_timer);
}
-void unthrottle_offline_cfs_rqs(struct rq *rq)
+static void unthrottle_offline_cfs_rqs(struct rq *rq)
{
struct cfs_rq *cfs_rq;
return NULL;
}
static inline void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b) {}
-void unthrottle_offline_cfs_rqs(struct rq *rq) {}
+static inline void unthrottle_offline_cfs_rqs(struct rq *rq) {}
#endif /* CONFIG_CFS_BANDWIDTH */
int cpu = smp_processor_id();
int prev_cpu = task_cpu(p);
struct sched_domain *sd;
+ struct sched_group *sg;
+ int i;
/*
* If the task is going to be woken-up on this cpu and if it is
return prev_cpu;
/*
- * Otherwise, check assigned siblings to find an elegible idle cpu.
+ * Otherwise, iterate the domains and find an elegible idle cpu.
*/
sd = rcu_dereference(per_cpu(sd_llc, target));
-
for_each_lower_domain(sd) {
- if (!cpumask_test_cpu(sd->idle_buddy, tsk_cpus_allowed(p)))
- continue;
- if (idle_cpu(sd->idle_buddy))
- return sd->idle_buddy;
- }
+ sg = sd->groups;
+ do {
+ if (!cpumask_intersects(sched_group_cpus(sg),
+ tsk_cpus_allowed(p)))
+ goto next;
+ for_each_cpu(i, sched_group_cpus(sg)) {
+ if (!idle_cpu(i))
+ goto next;
+ }
+
+ target = cpumask_first_and(sched_group_cpus(sg),
+ tsk_cpus_allowed(p));
+ goto done;
+next:
+ sg = sg->next;
+ } while (sg != sd->groups);
+ }
+done:
return target;
}
* @group: sched_group whose statistics are to be updated.
* @load_idx: Load index of sched_domain of this_cpu for load calc.
* @local_group: Does group contain this_cpu.
- * @cpus: Set of cpus considered for load balancing.
* @balance: Should we balance.
* @sgs: variable to hold the statistics for this group.
*/
/**
* update_sd_lb_stats - Update sched_domain's statistics for load balancing.
* @env: The load balancing environment.
- * @cpus: Set of cpus considered for load balancing.
* @balance: Should we balance.
* @sds: variable to hold the statistics for this sched_domain.
*/
static void rq_offline_fair(struct rq *rq)
{
update_sysctl();
+
+ /* Ensure any throttled groups are reachable by pick_next_task */
+ unthrottle_offline_cfs_rqs(rq);
}
#endif /* CONFIG_SMP */
* runtime - in which case borrowing doesn't make sense.
*/
rt_rq->rt_runtime = RUNTIME_INF;
+ rt_rq->rt_throttled = 0;
raw_spin_unlock(&rt_rq->rt_runtime_lock);
raw_spin_unlock(&rt_b->rt_runtime_lock);
}
extern void init_cfs_rq(struct cfs_rq *cfs_rq);
extern void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq);
-extern void unthrottle_offline_cfs_rqs(struct rq *rq);
extern void account_cfs_bandwidth_used(int enabled, int was_enabled);
tick_do_update_jiffies64(now);
update_cpu_load_nohz();
+ calc_load_exit_idle();
touch_softlockup_watchdog();
/*
* Cancel the scheduled timer and restore the tick
memcpy(out1 + head, p, l);
err = pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len);
+ if (err)
+ goto err;
- if (!err && len == hlen)
- err = memcmp(out2, h, hlen);
+ if (len != hlen || memcmp(out2, h, hlen))
+ err = -EINVAL;
err:
mpi_free(in);
min(new_area_start, memblock.current_limit),
new_alloc_size, PAGE_SIZE);
- new_array = addr ? __va(addr) : 0;
+ new_array = addr ? __va(addr) : NULL;
}
if (!addr) {
pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/a2mp.h>
+#include <net/bluetooth/smp.h>
static void hci_le_connect(struct hci_conn *conn)
{
{
BT_DBG("hcon %p", conn);
+ if (conn->type == LE_LINK)
+ return smp_conn_security(conn, sec_level);
+
/* For sdp we don't need the link key. */
if (sec_level == BT_SECURITY_SDP)
return 1;
static void l2cap_conn_ready(struct l2cap_conn *conn)
{
struct l2cap_chan *chan;
+ struct hci_conn *hcon = conn->hcon;
BT_DBG("conn %p", conn);
- if (!conn->hcon->out && conn->hcon->type == LE_LINK)
+ if (!hcon->out && hcon->type == LE_LINK)
l2cap_le_conn_ready(conn);
- if (conn->hcon->out && conn->hcon->type == LE_LINK)
- smp_conn_security(conn, conn->hcon->pending_sec_level);
+ if (hcon->out && hcon->type == LE_LINK)
+ smp_conn_security(hcon, hcon->pending_sec_level);
mutex_lock(&conn->chan_lock);
continue;
}
- if (conn->hcon->type == LE_LINK) {
- if (smp_conn_security(conn, chan->sec_level))
+ if (hcon->type == LE_LINK) {
+ if (smp_conn_security(hcon, chan->sec_level))
l2cap_chan_ready(chan);
} else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
break;
}
- if (smp_conn_security(conn, sec.level))
+ if (smp_conn_security(conn->hcon, sec.level))
break;
sk->sk_state = BT_CONFIG;
chan->state = BT_CONFIG;
mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type,
hcon->dst_type, reason);
- if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) {
- cancel_delayed_work_sync(&conn->security_timer);
+ cancel_delayed_work_sync(&conn->security_timer);
+
+ if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags))
smp_chan_destroy(conn);
- }
}
#define JUST_WORKS 0x00
return 0;
}
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level)
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
{
- struct hci_conn *hcon = conn->hcon;
+ struct l2cap_conn *conn = hcon->l2cap_data;
struct smp_chan *smp = conn->smp_chan;
__u8 authreq;
unsigned int bitmask;
spin_lock_bh(&ebt_log_lock);
- printk("<%c>%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
+ printk(KERN_SOH "%c%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
'0' + loginfo->u.log.level, prefix,
in ? in->name : "", out ? out->name : "",
eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
void (*put)(struct cflayer *lyr))
{
struct cfsrvl *service;
- service = container_of(adapt_layer->dn, struct cfsrvl, layer);
- WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL);
+ if (WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL))
+ return;
+ service = container_of(adapt_layer->dn, struct cfsrvl, layer);
service->hold = hold;
service->put = put;
}
if (!skb_flow_dissect(skb, &keys))
return;
- if (keys.ports) {
- if ((__force u16)keys.port16[1] < (__force u16)keys.port16[0])
- swap(keys.port16[0], keys.port16[1]);
+ if (keys.ports)
skb->l4_rxhash = 1;
- }
/* get a consistent hash (same value on both flow directions) */
- if ((__force u32)keys.dst < (__force u32)keys.src)
+ if (((__force u32)keys.dst < (__force u32)keys.src) ||
+ (((__force u32)keys.dst == (__force u32)keys.src) &&
+ ((__force u16)keys.port16[1] < (__force u16)keys.port16[0]))) {
swap(keys.dst, keys.src);
+ swap(keys.port16[0], keys.port16[1]);
+ }
hash = jhash_3words((__force u32)keys.dst,
(__force u32)keys.src,
/* Eth + IPh + UDPh + mpls */
datalen = pkt_dev->cur_pkt_size - 14 - 20 - 8 -
pkt_dev->pkt_overhead;
- if (datalen < sizeof(struct pktgen_hdr))
+ if (datalen < 0 || datalen < sizeof(struct pktgen_hdr))
datalen = sizeof(struct pktgen_hdr);
udph->source = htons(pkt_dev->cur_udp_src);
void sock_edemux(struct sk_buff *skb)
{
- sock_put(skb->sk);
+ struct sock *sk = skb->sk;
+
+#ifdef CONFIG_INET
+ if (sk->sk_state == TCP_TIME_WAIT)
+ inet_twsk_put(inet_twsk(sk));
+ else
+#endif
+ sock_put(sk);
}
EXPORT_SYMBOL(sock_edemux);
if (unlikely(err)) {
trace_kfree_skb(skb, udp_recvmsg);
+ if (!peeked) {
+ atomic_inc(&sk->sk_drops);
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS, is_udplite);
+ }
goto out_free;
}
tp->mtu_info = ntohl(info);
if (!sock_owned_by_user(sk))
tcp_v6_mtu_reduced(sk);
- else
- set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags);
+ else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,
+ &tp->tsq_flags))
+ sock_hold(sk);
goto out;
}
}
if (unlikely(err)) {
trace_kfree_skb(skb, udpv6_recvmsg);
+ if (!peeked) {
+ atomic_inc(&sk->sk_drops);
+ if (is_udp4)
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS,
+ is_udplite);
+ else
+ UDP6_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS,
+ is_udplite);
+ }
goto out_free;
}
if (!peeked) {
return err;
}
+static struct lock_class_key l2tp_socket_class;
+
int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp)
{
struct l2tp_tunnel *tunnel = NULL;
tunnel->old_sk_destruct = sk->sk_destruct;
sk->sk_destruct = &l2tp_tunnel_destruct;
tunnel->sock = sk;
+ lockdep_set_class_and_name(&sk->sk_lock.slock, &l2tp_socket_class, "l2tp_sock");
+
sk->sk_allocation = GFP_ATOMIC;
/* Add tunnel to our list */
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
}
- if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
+ if (!pskb_may_pull(skb, ETH_HLEN))
goto error;
secpath_reset(skb);
else
memset(next_hop, 0, ETH_ALEN);
+ memset(pinfo, 0, sizeof(*pinfo));
+
pinfo->generation = mesh_paths_generation;
pinfo->filled = MPATH_INFO_FRAME_QLEN |
pinfo->discovery_timeout =
jiffies_to_msecs(mpath->discovery_timeout);
pinfo->discovery_retries = mpath->discovery_retries;
- pinfo->flags = 0;
if (mpath->flags & MESH_PATH_ACTIVE)
pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
if (mpath->flags & MESH_PATH_RESOLVING)
pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
if (mpath->flags & MESH_PATH_FIXED)
pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
- if (mpath->flags & MESH_PATH_RESOLVING)
- pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
-
- pinfo->flags = mpath->flags;
+ if (mpath->flags & MESH_PATH_RESOLVED)
+ pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED;
}
static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
goto out_unlock;
err_clear:
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
ifmgd->auth_data = NULL;
err_free:
kfree(auth_data);
err = 0;
goto out;
err_clear:
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
ifmgd->assoc_data = NULL;
err_free:
kfree(assoc_data);
* sCL -> sSS
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
-/*synack*/ { sIV, sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, sSR },
+/*synack*/ { sIV, sIV, sSR, sIV, sIV, sIV, sIV, sIV, sIV, sSR },
/*
* sNO -> sIV Too late and no reason to do anything
* sSS -> sIV Client can't send SYN and then SYN/ACK
* sS2 -> sSR SYN/ACK sent to SYN2 in simultaneous open
- * sSR -> sIG
- * sES -> sIG Error: SYNs in window outside the SYN_SENT state
- * are errors. Receiver will reply with RST
- * and close the connection.
- * Or we are not in sync and hold a dead connection.
- * sFW -> sIG
- * sCW -> sIG
- * sLA -> sIG
- * sTW -> sIG
- * sCL -> sIG
+ * sSR -> sSR Late retransmitted SYN/ACK in simultaneous open
+ * sES -> sIV Invalid SYN/ACK packets sent by the client
+ * sFW -> sIV
+ * sCW -> sIV
+ * sLA -> sIV
+ * sTW -> sIV
+ * sCL -> sIV
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
/*fin*/ { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV },
ack = sack = receiver->td_end;
}
- if (seq == end
- && (!tcph->rst
- || (seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT)))
+ if (tcph->rst && seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT)
/*
- * Packets contains no data: we assume it is valid
- * and check the ack value only.
- * However RST segments are always validated by their
- * SEQ number, except when seq == 0 (reset sent answering
- * SYN.
+ * RST sent answering SYN.
*/
seq = end = sender->td_end;
struct nlmsghdr *nlh;
struct nfgenmsg *nfmsg;
sk_buff_data_t old_tail = inst->skb->tail;
+ struct sock *sk;
nlh = nlmsg_put(inst->skb, 0, 0,
NFNL_SUBSYS_ULOG << 8 | NFULNL_MSG_PACKET,
}
/* UID */
- if (skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file) {
- struct file *file = skb->sk->sk_socket->file;
+ sk = skb->sk;
+ if (sk && sk->sk_state != TCP_TIME_WAIT) {
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file) {
+ struct file *file = sk->sk_socket->file;
__be32 uid = htonl(file->f_cred->fsuid);
__be32 gid = htonl(file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
if (nla_put_be32(inst->skb, NFULA_UID, uid) ||
nla_put_be32(inst->skb, NFULA_GID, gid))
goto nla_put_failure;
} else
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
/* local sequence number */
return 0;
}
+static void dump_sk_uid_gid(struct sbuff *m, struct sock *sk)
+{
+ if (!sk || sk->sk_state == TCP_TIME_WAIT)
+ return;
+
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file)
+ sb_add(m, "UID=%u GID=%u ",
+ sk->sk_socket->file->f_cred->fsuid,
+ sk->sk_socket->file->f_cred->fsgid);
+ read_unlock_bh(&sk->sk_callback_lock);
+}
+
/* One level of recursion won't kill us */
static void dump_ipv4_packet(struct sbuff *m,
const struct nf_loginfo *info,
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && !iphoff && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && !iphoff)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!iphoff && skb->mark)
const struct nf_loginfo *loginfo,
const char *prefix)
{
- sb_add(m, "<%d>%sIN=%s OUT=%s ", loginfo->u.log.level,
- prefix,
+ sb_add(m, KERN_SOH "%c%sIN=%s OUT=%s ",
+ '0' + loginfo->u.log.level, prefix,
in ? in->name : "",
out ? out->name : "");
#ifdef CONFIG_BRIDGE_NETFILTER
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && recurse && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && recurse)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!recurse && skb->mark)
msg->msg_flags |= MSG_TRUNC;
}
- skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ er = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ if (er < 0) {
+ skb_free_datagram(sk, skb);
+ release_sock(sk);
+ return er;
+ }
if (sax != NULL) {
sax->sax25_family = AF_NETROM;
return pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
}
-/* remove VLAN header from packet and update csum accrodingly. */
+/* remove VLAN header from packet and update csum accordingly. */
static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci)
{
struct vlan_hdr *vhdr;
static int validate_tp_port(const struct sw_flow_key *flow_key)
{
if (flow_key->eth.type == htons(ETH_P_IP)) {
- if (flow_key->ipv4.tp.src && flow_key->ipv4.tp.dst)
+ if (flow_key->ipv4.tp.src || flow_key->ipv4.tp.dst)
return 0;
} else if (flow_key->eth.type == htons(ETH_P_IPV6)) {
- if (flow_key->ipv6.tp.src && flow_key->ipv6.tp.dst)
+ if (flow_key->ipv6.tp.src || flow_key->ipv6.tp.dst)
return 0;
}
if (flow_key->eth.type != htons(ETH_P_IP))
return -EINVAL;
- if (!flow_key->ipv4.addr.src || !flow_key->ipv4.addr.dst)
+ if (!flow_key->ip.proto)
return -EINVAL;
ipv4_key = nla_data(ovs_key);
* OVS_KEY_ATTR_PRIORITY 4 -- 4 8
* OVS_KEY_ATTR_IN_PORT 4 -- 4 8
* OVS_KEY_ATTR_ETHERNET 12 -- 4 16
+ * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (outer VLAN ethertype)
* OVS_KEY_ATTR_8021Q 4 -- 4 8
- * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8
+ * OVS_KEY_ATTR_ENCAP 0 -- 4 4 (VLAN encapsulation)
+ * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (inner VLAN ethertype)
* OVS_KEY_ATTR_IPV6 40 -- 4 44
* OVS_KEY_ATTR_ICMPV6 2 2 4 8
* OVS_KEY_ATTR_ND 28 -- 4 32
* -------------------------------------------------
- * total 132
+ * total 144
*/
-#define FLOW_BUFSIZE 132
+#define FLOW_BUFSIZE 144
int ovs_flow_to_nlattrs(const struct sw_flow_key *, struct sk_buff *);
int ovs_flow_from_nlattrs(struct sw_flow_key *swkey, int *key_lenp,
else if ((cl = defmap[res.classid & TC_PRIO_MAX]) == NULL)
cl = defmap[TC_PRIO_BESTEFFORT];
- if (cl == NULL || cl->level >= head->level)
+ if (cl == NULL)
goto fallback;
}
-
+ if (cl->level >= head->level)
+ goto fallback;
#ifdef CONFIG_NET_CLS_ACT
switch (result) {
case TC_ACT_QUEUED:
if (list_empty(&flow->flowchain)) {
list_add_tail(&flow->flowchain, &q->new_flows);
- codel_vars_init(&flow->cvars);
q->new_flow_count++;
flow->deficit = q->quantum;
flow->dropped = 0;
struct fq_codel_flow *flow = q->flows + i;
INIT_LIST_HEAD(&flow->flowchain);
+ codel_vars_init(&flow->cvars);
}
}
if (sch->limit >= 1)
if (q == NULL)
continue;
- for (n = 0; n < table->DPs; n++)
- if (table->tab[n] && table->tab[n] != q &&
- table->tab[n]->prio == q->prio)
+ for (n = i + 1; n < table->DPs; n++)
+ if (table->tab[n] && table->tab[n]->prio == q->prio)
return 1;
}
struct gred_sched_data *q)
{
table->wred_set.qavg = q->vars.qavg;
+ table->wred_set.qidlestart = q->vars.qidlestart;
}
static inline int gred_use_ecn(struct gred_sched *t)
skb->tc_index = (skb->tc_index & ~GRED_VQ_MASK) | dp;
}
- /* sum up all the qaves of prios <= to ours to get the new qave */
+ /* sum up all the qaves of prios < ours to get the new qave */
if (!gred_wred_mode(t) && gred_rio_mode(t)) {
int i;
} else {
q->backlog -= qdisc_pkt_len(skb);
- if (!q->backlog && !gred_wred_mode(t))
- red_start_of_idle_period(&q->vars);
+ if (gred_wred_mode(t)) {
+ if (!sch->qstats.backlog)
+ red_start_of_idle_period(&t->wred_set);
+ } else {
+ if (!q->backlog)
+ red_start_of_idle_period(&q->vars);
+ }
}
return skb;
}
- if (gred_wred_mode(t) && !red_is_idling(&t->wred_set))
- red_start_of_idle_period(&t->wred_set);
-
return NULL;
}
q->backlog -= len;
q->stats.other++;
- if (!q->backlog && !gred_wred_mode(t))
- red_start_of_idle_period(&q->vars);
+ if (gred_wred_mode(t)) {
+ if (!sch->qstats.backlog)
+ red_start_of_idle_period(&t->wred_set);
+ } else {
+ if (!q->backlog)
+ red_start_of_idle_period(&q->vars);
+ }
}
qdisc_drop(skb, sch);
return len;
}
- if (gred_wred_mode(t) && !red_is_idling(&t->wred_set))
- red_start_of_idle_period(&t->wred_set);
-
return 0;
-
}
static void gred_reset(struct Qdisc *sch)
for (i = 0; i < MAX_DPs; i++) {
struct gred_sched_data *q = table->tab[i];
struct tc_gred_qopt opt;
+ unsigned long qavg;
memset(&opt, 0, sizeof(opt));
if (gred_wred_mode(table))
gred_load_wred_set(table, q);
- opt.qave = red_calc_qavg(&q->parms, &q->vars, q->vars.qavg);
+ qavg = red_calc_qavg(&q->parms, &q->vars,
+ q->vars.qavg >> q->parms.Wlog);
+ opt.qave = qavg >> q->parms.Wlog;
append_opt:
if (nla_append(skb, sizeof(opt), &opt) < 0)
return retval;
}
+static void sctp_packet_release_owner(struct sk_buff *skb)
+{
+ sk_free(skb->sk);
+}
+
+static void sctp_packet_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ skb_orphan(skb);
+ skb->sk = sk;
+ skb->destructor = sctp_packet_release_owner;
+
+ /*
+ * The data chunks have already been accounted for in sctp_sendmsg(),
+ * therefore only reserve a single byte to keep socket around until
+ * the packet has been transmitted.
+ */
+ atomic_inc(&sk->sk_wmem_alloc);
+}
+
/* All packets are sent to the network through this function from
* sctp_outq_tail().
*
/* Set the owning socket so that we know where to get the
* destination IP address.
*/
- skb_set_owner_w(nskb, sk);
+ sctp_packet_set_owner_w(nskb, sk);
if (!sctp_transport_dst_check(tp)) {
sctp_transport_route(tp, NULL, sctp_sk(sk));
return false;
}
-static void xprt_alloc_slot(struct rpc_task *task)
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
{
- struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_rqst *req;
+ spin_lock(&xprt->reserve_lock);
if (!list_empty(&xprt->free)) {
req = list_entry(xprt->free.next, struct rpc_rqst, rq_list);
list_del(&req->rq_list);
default:
task->tk_status = -EAGAIN;
}
+ spin_unlock(&xprt->reserve_lock);
return;
out_init_req:
task->tk_status = 0;
task->tk_rqstp = req;
xprt_request_init(task, xprt);
+ spin_unlock(&xprt->reserve_lock);
+}
+EXPORT_SYMBOL_GPL(xprt_alloc_slot);
+
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
+{
+ /* Note: grabbing the xprt_lock_write() ensures that we throttle
+ * new slot allocation if the transport is congested (i.e. when
+ * reconnecting a stream transport or when out of socket write
+ * buffer space).
+ */
+ if (xprt_lock_write(xprt, task)) {
+ xprt_alloc_slot(xprt, task);
+ xprt_release_write(xprt, task);
+ }
}
+EXPORT_SYMBOL_GPL(xprt_lock_and_alloc_slot);
static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
{
if (task->tk_rqstp != NULL)
return;
- /* Note: grabbing the xprt_lock_write() here is not strictly needed,
- * but ensures that we throttle new slot allocation if the transport
- * is congested (e.g. if reconnecting or if we're out of socket
- * write buffer space).
- */
task->tk_timeout = 0;
task->tk_status = -EAGAIN;
- if (!xprt_lock_write(xprt, task))
- return;
-
- spin_lock(&xprt->reserve_lock);
- xprt_alloc_slot(task);
- spin_unlock(&xprt->reserve_lock);
- xprt_release_write(xprt, task);
+ xprt->ops->alloc_slot(xprt, task);
}
static inline __be32 xprt_alloc_xid(struct rpc_xprt *xprt)
static struct rpc_xprt_ops xprt_rdma_procs = {
.reserve_xprt = xprt_rdma_reserve_xprt,
.release_xprt = xprt_release_xprt_cong, /* sunrpc/xprt.c */
+ .alloc_slot = xprt_alloc_slot,
.release_request = xprt_release_rqst_cong, /* ditto */
.set_retrans_timeout = xprt_set_retrans_timeout_def, /* ditto */
.rpcbind = rpcb_getport_async, /* sunrpc/rpcb_clnt.c */
static struct rpc_xprt_ops xs_local_ops = {
.reserve_xprt = xprt_reserve_xprt,
.release_xprt = xs_tcp_release_xprt,
+ .alloc_slot = xprt_alloc_slot,
.rpcbind = xs_local_rpcbind,
.set_port = xs_local_set_port,
.connect = xs_connect,
.set_buffer_size = xs_udp_set_buffer_size,
.reserve_xprt = xprt_reserve_xprt_cong,
.release_xprt = xprt_release_xprt_cong,
+ .alloc_slot = xprt_alloc_slot,
.rpcbind = rpcb_getport_async,
.set_port = xs_set_port,
.connect = xs_connect,
static struct rpc_xprt_ops xs_tcp_ops = {
.reserve_xprt = xprt_reserve_xprt,
.release_xprt = xs_tcp_release_xprt,
+ .alloc_slot = xprt_lock_and_alloc_slot,
.rpcbind = rpcb_getport_async,
.set_port = xs_set_port,
.connect = xs_connect,
sizeof(connect.ht_capa_mask));
if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) {
- if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
+ if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]) {
+ kfree(connkeys);
return -EINVAL;
+ }
memcpy(&connect.ht_capa,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]),
sizeof(connect.ht_capa));
/* only the first xfrm gets the encap type */
encap_type = 0;
- if (async && x->repl->check(x, skb, seq)) {
+ if (async && x->repl->recheck(x, skb, seq)) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
goto drop_unlock;
}
return -EINVAL;
}
+static int xfrm_replay_recheck_esn(struct xfrm_state *x,
+ struct sk_buff *skb, __be32 net_seq)
+{
+ if (unlikely(XFRM_SKB_CB(skb)->seq.input.hi !=
+ htonl(xfrm_replay_seqhi(x, net_seq)))) {
+ x->stats.replay_window++;
+ return -EINVAL;
+ }
+
+ return xfrm_replay_check_esn(x, skb, net_seq);
+}
+
static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq)
{
unsigned int bitnr, nr, i;
static struct xfrm_replay xfrm_replay_legacy = {
.advance = xfrm_replay_advance,
.check = xfrm_replay_check,
+ .recheck = xfrm_replay_check,
.notify = xfrm_replay_notify,
.overflow = xfrm_replay_overflow,
};
static struct xfrm_replay xfrm_replay_bmp = {
.advance = xfrm_replay_advance_bmp,
.check = xfrm_replay_check_bmp,
+ .recheck = xfrm_replay_check_bmp,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_bmp,
};
static struct xfrm_replay xfrm_replay_esn = {
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
+ .recheck = xfrm_replay_recheck_esn,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_esn,
};
int maj = imajor(inode);
int ret;
- if (f->f_flags & O_WRONLY)
+ if ((f->f_flags & O_ACCMODE) == O_WRONLY)
dirn = SND_COMPRESS_PLAYBACK;
- else if (f->f_flags & O_RDONLY)
+ else if ((f->f_flags & O_ACCMODE) == O_RDONLY)
dirn = SND_COMPRESS_CAPTURE;
- else {
- pr_err("invalid direction\n");
+ else
return -EINVAL;
- }
if (maj == snd_major)
compr = snd_lookup_minor_data(iminor(inode),
}
if (codec->patch_ops.free)
codec->patch_ops.free(codec);
+ memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
snd_hda_jack_tbl_clear(codec);
codec->proc_widget_hook = NULL;
codec->spec = NULL;
codec->num_pcms = 0;
codec->pcm_info = NULL;
codec->preset = NULL;
- memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
codec->slave_dig_outs = NULL;
codec->spdif_status_reset = 0;
module_put(codec->owner);
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x1ac3, "ASUS X53S", POS_FIX_POSBUF),
+ SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
static const char * const slave_pfxs[] = {
"Front", "Surround", "Center", "LFE", "Side",
- "Headphone", "Speaker", "IEC958",
+ "Headphone", "Speaker", "IEC958", "PCM",
NULL
};
}
static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1);
+static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);
static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = {
{
.info = ak4396_dac_vol_info,
.get = ak4396_dac_vol_get,
.put = ak4396_dac_vol_put,
- .tlv = { .p = db_scale_wm_dac },
+ .tlv = { .p = ak4396_db_scale },
},
};
940800,
1411200,
1881600,
- 2882400,
+ 2822400,
3763200,
5644800,
7526400,
.id = MC13783_ID_STEREO_DAC,
.playback = {
.stream_name = "Playback",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = MC13783_FORMATS,
.id = MC13783_ID_STEREO_CODEC,
.capture = {
.stream_name = "Capture",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = MC13783_RATES_RECORD,
.formats = MC13783_FORMATS,
.id = MC13783_ID_SYNC,
.playback = {
.stream_name = "Playback",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = MC13783_FORMATS,
},
.capture = {
.stream_name = "Capture",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = MC13783_RATES_RECORD,
.formats = MC13783_FORMATS,
{ 14, 0x0000 }, /* R14 - Power Management 2 */
{ 15, 0x0000 }, /* R15 - Power Management 3 */
{ 18, 0x0000 }, /* R18 - Power Management 6 */
- { 19, 0x945E }, /* R20 - Clock Rates 0 */
+ { 20, 0x945E }, /* R20 - Clock Rates 0 */
{ 21, 0x0C05 }, /* R21 - Clock Rates 1 */
{ 22, 0x0006 }, /* R22 - Clock Rates 2 */
{ 24, 0x0050 }, /* R24 - Audio Interface 0 */
dev_err(&pdev->dev, "audmux internal port setup failed\n");
return ret;
}
- imx_audmux_v2_configure_port(ext_port,
+ ret = imx_audmux_v2_configure_port(ext_port,
IMX_AUDMUX_V2_PTCR_SYN,
IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
if (ret) {
return ret;
}
- snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
+ ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
SND_SOC_CLOCK_IN);
if (ret < 0) {
printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_FSR_SRC_FSX\n");
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_U16_LE |
SNDRV_PCM_FMTBIT_U8 |
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
prtd->params->ops->trigger(prtd->params->ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->state &= ~ST_RUNNING;
prtd->params->ops->stop(prtd->params->ch);
break;
if (dapm->codec->driver->set_bias_level)
ret = dapm->codec->driver->set_bias_level(dapm->codec,
level);
- } else
+ else
+ dapm->bias_level = level;
+ } else if (!card || dapm != &card->dapm) {
dapm->bias_level = level;
+ }
if (ret != 0)
goto out;
continue;
buf = &substream->dma_buffer;
- if (!buf && !buf->area)
+ if (!buf || !buf->area)
continue;
dma_free_writecombine(pcm->card->dev, buf->bytes,
.name = "Headset detection",
.report = SND_JACK_HEADSET,
.debounce_time = 150,
- .invert = 1,
};
static const struct snd_soc_dapm_widget tegra_alc5632_dapm_widgets[] = {
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_config.dst_addr = dmap->addr;
- slave_config.src_maxburst = 0;
+ slave_config.dst_maxburst = 4;
} else {
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_config.src_addr = dmap->addr;
- slave_config.dst_maxburst = 0;
+ slave_config.src_maxburst = 4;
}
slave_config.slave_id = dmap->req_sel;
struct ux500_msp **msp_p,
struct msp_i2s_platform_data *platform_data)
{
- int ret = 0;
struct resource *res = NULL;
struct i2s_controller *i2s_cont;
struct ux500_msp *msp;
if (res == NULL) {
dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n",
__func__);
- ret = -ENOMEM;
- goto err_res;
+ return -ENOMEM;
}
- msp->registers = ioremap(res->start, (res->end - res->start + 1));
+ msp->registers = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
if (msp->registers == NULL) {
dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__);
- ret = -ENOMEM;
- goto err_res;
+ return -ENOMEM;
}
msp->msp_state = MSP_STATE_IDLE;
dev_err(&pdev->dev,
"%s: ERROR: Failed to allocate I2S-controller!\n",
__func__);
- goto err_i2s_cont;
+ return -ENOMEM;
}
i2s_cont->dev.parent = &pdev->dev;
i2s_cont->data = (void *)msp;
msp->i2s_cont = i2s_cont;
return 0;
-
-err_i2s_cont:
- iounmap(msp->registers);
-
-err_res:
- devm_kfree(&pdev->dev, msp);
-
- return ret;
}
void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev,
dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id);
device_unregister(&msp->i2s_cont->dev);
- devm_kfree(&pdev->dev, msp->i2s_cont);
-
- iounmap(msp->registers);
-
- devm_kfree(&pdev->dev, msp);
}
MODULE_LICENSE("GPL v2");
int processed = urb->transfer_buffer_length / stride;
int est_delay;
+ /* ignore the delay accounting when procssed=0 is given, i.e.
+ * silent payloads are procssed before handling the actual data
+ */
+ if (!processed)
+ return;
+
spin_lock_irqsave(&subs->lock, flags);
est_delay = snd_usb_pcm_delay(subs, runtime->rate);
/* update delay with exact number of samples played */
projects / karo-tx-linux.git / commitdiff