omap3: igep3: Fix IGEP module second MMC channel power supply

The second MMC channel (used by the WLAN/BT module) is not linked to
power regulator. This causes the WLAN/BT module to fail being detected if
CONFIG_REGULATOR_DUMMY is not set.

This patch adds the two regulators that actually feed the WLAN/BT module
(1v8 from the TWL4030 VIO LDO, and a fixed 3v3). With that patch, the
second channel is properly detected.

Also change vmmc1 to use symbolic names instead of direct device
reference.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index f0a85c1d24a71dde8846e87899a7894482cc8192..11b944f93d2441de29e6d55408c0910671c4aded 100644 (file)
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
@@ -140,9 +141,8 @@ static void __init igep3_flash_init(void)
 static void __init igep3_flash_init(void) {}
 #endif
 
-static struct regulator_consumer_supply igep3_vmmc1_supply = {
-       .supply         = "vmmc",
-};
+static struct regulator_consumer_supply igep3_vmmc1_supply =
+       REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep3_vmmc1 = {
@@ -159,6 +159,52 @@ static struct regulator_init_data igep3_vmmc1 = {
        .consumer_supplies      = &igep3_vmmc1_supply,
 };
 
+static struct regulator_consumer_supply igep3_vio_supply =
+       REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep3_vio = {
+       .constraints = {
+               .min_uV                 = 1800000,
+               .max_uV                 = 1800000,
+               .apply_uV               = 1,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
+                                       | REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies      = &igep3_vio_supply,
+};
+
+static struct regulator_consumer_supply igep3_vmmc2_supply =
+       REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep3_vmmc2 = {
+       .constraints    = {
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL,
+               .always_on              = 1,
+       },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies      = &igep3_vmmc2_supply,
+};
+
+static struct fixed_voltage_config igep3_vwlan = {
+       .supply_name            = "vwlan",
+       .microvolts             = 3300000,
+       .gpio                   = -EINVAL,
+       .enabled_at_boot        = 1,
+       .init_data              = &igep3_vmmc2,
+};
+
+static struct platform_device igep3_vwlan_device = {
+       .name   = "reg-fixed-voltage",
+       .id     = 0,
+       .dev    = {
+               .platform_data = &igep3_vwlan,
+       },
+};
+
 static struct omap2_hsmmc_info mmc[] = {
        [0] = {
                .mmc            = 1,
@@ -254,12 +300,6 @@ static int igep3_twl4030_gpio_setup(struct device *dev,
        mmc[0].gpio_cd = gpio + 0;
        omap2_hsmmc_init(mmc);
 
-       /*
-        * link regulators to MMC adapters ... we "know" the
-        * regulators will be set up only *after* we return.
-        */
-       igep3_vmmc1_supply.dev = mmc[0].dev;
-
        /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
        if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
@@ -287,6 +327,10 @@ static struct twl4030_usb_data igep3_twl4030_usb_data = {
        .usb_mode       = T2_USB_MODE_ULPI,
 };
 
+static struct platform_device *igep3_devices[] __initdata = {
+       &igep3_vwlan_device,
+};
+
 static void __init igep3_init_irq(void)
 {
        omap2_init_common_infrastructure();
@@ -303,6 +347,7 @@ static struct twl4030_platform_data igep3_twl4030_pdata = {
        .usb            = &igep3_twl4030_usb_data,
        .gpio           = &igep3_twl4030_gpio_pdata,
        .vmmc1          = &igep3_vmmc1,
+       .vio            = &igep3_vio,
 };
 
 static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = {
@@ -387,7 +432,7 @@ static void __init igep3_init(void)
 
        /* Register I2C busses and drivers */
        igep3_i2c_init();
-
+       platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));
        omap_serial_init();
        usb_musb_init(&musb_board_data);
        usb_ehci_init(&ehci_pdata);