--- /dev/null
+* Renesas SH-Mobile Serial Communication Interface
+
+Required properties:
+- compatible : Should be "renesas,sci-<port type>-uart", where <port type> may be
+ SCI, SCIF, IRDA, SCIFA or SCIFB.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the following IRQs: ERI, RXI, TXI and BRI.
+- cell-index : The device id.
+- renesas,scscr : Should contain a bitfield used by the Serial Control Register.
+ b7 = SCSCR_TIE
+ b6 = SCSCR_RIE
+ b5 = SCSCR_TE
+ b4 = SCSCR_RE
+ b3 = SCSCR_REIE
+ b2 = SCSCR_TOIE
+ b1 = SCSCR_CKE1
+ b0 = SCSCR_CKE0
+- renesas,scbrr-algo-id : Algorithm ID for the Bit Rate Register
+ 1 = SCBRR_ALGO_1 ((clk + 16 * bps) / (16 * bps) - 1)
+ 2 = SCBRR_ALGO_2 ((clk + 16 * bps) / (32 * bps) - 1)
+ 3 = SCBRR_ALGO_3 (((clk * 2) + 16 * bps) / (16 * bps) - 1)
+ 4 = SCBRR_ALGO_4 (((clk * 2) + 16 * bps) / (32 * bps) - 1)
+ 5 = SCBRR_ALGO_5 (((clk * 1000 / 32) / bps) - 1)
+
+Optional properties:
+- renesas,autoconf : Set if device is capable of auto configuration
+- renesas,regtype : Overwrite the register layout. In most cases you can rely
+ on auto-probing (omit this property or set to 0) but some legacy devices
+ use a non-default register layout. Possible layouts are
+ 0 = SCIx_PROBE_REGTYPE (default)
+ 1 = SCIx_SCI_REGTYPE
+ 2 = SCIx_IRDA_REGTYPE
+ 3 = SCIx_SCIFA_REGTYPE
+ 4 = SCIx_SCIFB_REGTYPE
+ 5 = SCIx_SH2_SCIF_FIFODATA_REGTYPE
+ 6 = SCIx_SH3_SCIF_REGTYPE
+ 7 = SCIx_SH4_SCIF_REGTYPE
+ 8 = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE
+ 9 = SCIx_SH4_SCIF_FIFODATA_REGTYPE
+ 10 = SCIx_SH7705_SCIF_REGTYPE
+
+
+Example:
+ sci@0xe6c50000 {
+ compatible = "renesas,sci-SCIFA-uart";
+ interrupt-parent = <&intca>;
+ reg = <0xe6c50000 0x100>;
+ interrupts = <0x0c20>, <0x0c20>, <0x0c20>, <0x0c20>;
+ cell-index = <1>;
+ renesas,scscr = <0x30>;
+ renesas,scbrr-algo-id = <4>;
+ renesas,autoconf;
+ };
#include <linux/kdebug.h>
#include <linux/types.h>
+#include <cpu/ubc.h>
struct arch_hw_breakpoint {
char *name; /* Contains name of the symbol to set bkpt */
u16 type;
};
-enum {
- SH_BREAKPOINT_READ = (1 << 1),
- SH_BREAKPOINT_WRITE = (1 << 2),
- SH_BREAKPOINT_RW = SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
-
- SH_BREAKPOINT_LEN_1 = (1 << 12),
- SH_BREAKPOINT_LEN_2 = (1 << 13),
- SH_BREAKPOINT_LEN_4 = SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
- SH_BREAKPOINT_LEN_8 = (1 << 14),
-};
-
struct sh_ubc {
const char *name;
unsigned int num_events;
--- /dev/null
+#ifndef __ARCH_SH_CPU_UBC_H__
+#define __ARCH_SH_CPU_UBC_H__
+
+enum {
+ SH_BREAKPOINT_READ = (1 << 1),
+ SH_BREAKPOINT_WRITE = (1 << 2),
+ SH_BREAKPOINT_RW = SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
+
+ SH_BREAKPOINT_LEN_1 = (1 << 12),
+ SH_BREAKPOINT_LEN_2 = (1 << 13),
+ SH_BREAKPOINT_LEN_4 = SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
+ SH_BREAKPOINT_LEN_8 = (1 << 14),
+};
+
+#define UBC_64BIT 1
+
+#endif /* __ARCH_SH_CPU_UBC_H__ */
--- /dev/null
+#ifndef __ARCH_SH_CPU_UBC_H__
+#define __ARCH_SH_CPU_UBC_H__
+
+enum {
+ SH_BREAKPOINT_READ = (1 << 2),
+ SH_BREAKPOINT_WRITE = (1 << 3),
+ SH_BREAKPOINT_RW = SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
+
+ SH_BREAKPOINT_LEN_1 = (1 << 0),
+ SH_BREAKPOINT_LEN_2 = (1 << 1),
+ SH_BREAKPOINT_LEN_4 = SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
+};
+
+#endif /* __ARCH_SH_CPU_UBC_H__ */
pinmux-$(CONFIG_CPU_SUBTYPE_SH7269) := pinmux-sh7269.o
obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh2a/ubc.c
+ *
+ * On-chip UBC support for SH-2A CPUs.
+ *
+ * Copyright (C) 2009 - 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/hw_breakpoint.h>
+
+#define UBC_BAR(idx) (0xfffc0400 + (0x10 * idx))
+#define UBC_BAMR(idx) (0xfffc0404 + (0x10 * idx))
+#define UBC_BBR(idx) (0xfffc04A0 + (0x10 * idx))
+#define UBC_BDR(idx) (0xfffc0408 + (0x10 * idx))
+#define UBC_BDMR(idx) (0xfffc040C + (0x10 * idx))
+
+#define UBC_BRCR 0xfffc04C0
+
+/* BBR */
+#define UBC_BBR_UBID (1 << 13) /* User Break Interrupt Disable */
+#define UBC_BBR_DBE (1 << 12) /* Data Break Enable */
+#define UBC_BBR_CD_C (1 << 6) /* C Bus Cycle */
+#define UBC_BBR_CD_I (2 << 6) /* I Bus Cycle */
+#define UBC_BBR_ID_I (1 << 4) /* Break Condition is instruction fetch cycle */
+#define UBC_BBR_ID_D (2 << 4) /* Break Condition is data access cycle */
+#define UBC_BBR_ID_ID (3 << 4) /* Break Condition is instruction fetch or data access cycle */
+
+#define UBC_CRR_BIE (1 << 0)
+
+/* CBR */
+#define UBC_CBR_CE (1 << 0)
+
+static struct sh_ubc sh2a_ubc;
+
+static void sh2a_ubc_enable(struct arch_hw_breakpoint *info, int idx)
+{
+ __raw_writel(UBC_BBR_DBE | UBC_BBR_CD_C | UBC_BBR_ID_ID |
+ info->len | info->type, UBC_BBR(idx));
+ __raw_writel(info->address, UBC_BAR(idx));
+}
+
+static void sh2a_ubc_disable(struct arch_hw_breakpoint *info, int idx)
+{
+ __raw_writel(UBC_BBR_UBID, UBC_BBR(idx));
+ __raw_writel(0, UBC_BAR(idx));
+}
+
+static void sh2a_ubc_enable_all(unsigned long mask)
+{
+ int i;
+
+ for (i = 0; i < sh2a_ubc.num_events; i++)
+ if (mask & (1 << i))
+ __raw_writel(__raw_readl(UBC_BBR(i)) & ~UBC_BBR_UBID,
+ UBC_BBR(i));
+}
+
+static void sh2a_ubc_disable_all(void)
+{
+ int i;
+
+ for (i = 0; i < sh2a_ubc.num_events; i++)
+ __raw_writel(__raw_readl(UBC_BBR(i)) | UBC_BBR_UBID,
+ UBC_BBR(i));
+}
+
+static unsigned long sh2a_ubc_active_mask(void)
+{
+ unsigned long active = 0;
+ int i;
+
+ for (i = 0; i < sh2a_ubc.num_events; i++)
+ if (!(__raw_readl(UBC_BBR(i)) & UBC_BBR_UBID))
+ active |= (1 << i);
+
+ return active;
+}
+
+static unsigned long sh2a_ubc_triggered_mask(void)
+{
+ unsigned int ret, mask;
+
+ mask = 0;
+ ret = __raw_readl(UBC_BRCR);
+ if ((ret & (1 << 15)) || (ret & (1 << 13))) {
+ mask |= (1 << 0); /* Match condition for channel 0 */
+ } else
+ mask &= ~(1 << 0);
+
+ if ((ret & (1 << 14)) || (ret & (1 << 12))) {
+ mask |= (1 << 1); /* Match condition for channel 1 */
+ } else
+ mask &= ~(1 << 1);
+
+ return mask;
+}
+
+static void sh2a_ubc_clear_triggered_mask(unsigned long mask)
+{
+ if (mask & (1 << 0)) /* Channel 0 statisfied break condition */
+ __raw_writel(__raw_readl(UBC_BRCR) &
+ ~((1 << 15) | (1 << 13)), UBC_BRCR);
+
+ if (mask & (1 << 1)) /* Channel 1 statisfied break condition */
+ __raw_writel(__raw_readl(UBC_BRCR) &
+ ~((1 << 14) | (1 << 12)), UBC_BRCR);
+}
+
+static struct sh_ubc sh2a_ubc = {
+ .name = "SH-2A",
+ .num_events = 2,
+ .trap_nr = 0x1e0,
+ .enable = sh2a_ubc_enable,
+ .disable = sh2a_ubc_disable,
+ .enable_all = sh2a_ubc_enable_all,
+ .disable_all = sh2a_ubc_disable_all,
+ .active_mask = sh2a_ubc_active_mask,
+ .triggered_mask = sh2a_ubc_triggered_mask,
+ .clear_triggered_mask = sh2a_ubc_clear_triggered_mask,
+};
+
+static int __init sh2a_ubc_init(void)
+{
+ struct clk *ubc_iclk = clk_get(NULL, "ubc0");
+ int i;
+
+ /*
+ * The UBC MSTP bit is optional, as not all platforms will have
+ * it. Just ignore it if we can't find it.
+ */
+ if (IS_ERR(ubc_iclk))
+ ubc_iclk = NULL;
+
+ clk_enable(ubc_iclk);
+
+ for (i = 0; i < sh2a_ubc.num_events; i++) {
+ __raw_writel(0, UBC_BAMR(i));
+ __raw_writel(0, UBC_BBR(i));
+ }
+
+ clk_disable(ubc_iclk);
+
+ sh2a_ubc.clk = ubc_iclk;
+
+ return register_sh_ubc(&sh2a_ubc);
+}
+arch_initcall(sh2a_ubc_init);
case SH_BREAKPOINT_LEN_4:
len_in_bytes = 4;
break;
+#ifdef UBC_64BIT
case SH_BREAKPOINT_LEN_8:
len_in_bytes = 8;
break;
+#endif
}
return len_in_bytes;
}
case SH_BREAKPOINT_LEN_4:
*gen_len = HW_BREAKPOINT_LEN_4;
break;
+#ifdef UBC_64BIT
case SH_BREAKPOINT_LEN_8:
*gen_len = HW_BREAKPOINT_LEN_8;
break;
+#endif
default:
return -EINVAL;
}
case HW_BREAKPOINT_LEN_4:
info->len = SH_BREAKPOINT_LEN_4;
break;
+#ifdef UBC_64BIT
case HW_BREAKPOINT_LEN_8:
info->len = SH_BREAKPOINT_LEN_8;
break;
+#endif
default:
return -EINVAL;
}
case SH_BREAKPOINT_LEN_4:
align = 3;
break;
+#ifdef UBC_64BIT
case SH_BREAKPOINT_LEN_8:
align = 7;
break;
+#endif
default:
return ret;
}
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/gpio.h>
+#include <linux/of.h>
#ifdef CONFIG_SUPERH
#include <asm/sh_bios.h>
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id of_sci_match[] = {
+ { .compatible = "renesas,sci-SCI-uart",
+ .data = (void *)PORT_SCI },
+ { .compatible = "renesas,sci-SCIF-uart",
+ .data = (void *)PORT_SCIF },
+ { .compatible = "renesas,sci-IRDA-uart",
+ .data = (void *)PORT_IRDA },
+ { .compatible = "renesas,sci-SCIFA-uart",
+ .data = (void *)PORT_SCIFA },
+ { .compatible = "renesas,sci-SCIFB-uart",
+ .data = (void *)PORT_SCIFB },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_sci_match);
+
+static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
+ int *dev_id)
+{
+ struct plat_sci_port *p;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ struct resource *res;
+ const __be32 *prop;
+ int i, irq, val;
+
+ match = of_match_node(of_sci_match, pdev->dev.of_node);
+ if (!match || !match->data) {
+ dev_err(&pdev->dev, "OF match error\n");
+ return NULL;
+ }
+
+ p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
+ if (!p) {
+ dev_err(&pdev->dev, "failed to allocate DT config data\n");
+ return NULL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ return NULL;
+ }
+ p->mapbase = res->start;
+
+ for (i = 0; i < SCIx_NR_IRQS; i++) {
+ irq = platform_get_irq(pdev, i);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get irq data %d\n", i);
+ return NULL;
+ }
+ p->irqs[i] = irq;
+ }
+
+ prop = of_get_property(np, "cell-index", NULL);
+ if (!prop) {
+ dev_err(&pdev->dev, "required DT prop cell-index missing\n");
+ return NULL;
+ }
+ *dev_id = be32_to_cpup(prop);
+
+ prop = of_get_property(np, "renesas,scscr", NULL);
+ if (!prop) {
+ dev_err(&pdev->dev, "required DT prop scscr missing\n");
+ return NULL;
+ }
+ p->scscr = be32_to_cpup(prop);
+
+ prop = of_get_property(np, "renesas,scbrr-algo-id", NULL);
+ if (!prop) {
+ dev_err(&pdev->dev, "required DT prop scbrr-algo-id missing\n");
+ return NULL;
+ }
+ val = be32_to_cpup(prop);
+ if (val <= SCBRR_ALGO_INVALID || val >= SCBRR_NR_ALGOS) {
+ dev_err(&pdev->dev, "DT prop scbrr-algo-id out of range\n");
+ return NULL;
+ }
+ p->scbrr_algo_id = val;
+
+ p->flags = UPF_IOREMAP;
+ if (of_get_property(np, "renesas,autoconf", NULL))
+ p->flags |= UPF_BOOT_AUTOCONF;
+
+ prop = of_get_property(np, "renesas,regtype", NULL);
+ if (prop) {
+ val = be32_to_cpup(prop);
+ if (val < SCIx_PROBE_REGTYPE || val >= SCIx_NR_REGTYPES) {
+ dev_err(&pdev->dev, "DT prop regtype out of range\n");
+ return NULL;
+ }
+ p->regtype = val;
+ }
+
+ p->type = (unsigned int)match->data;
+
+ return p;
+}
+#else
+static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
+ int *dev_id)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF */
+
static int sci_probe_single(struct platform_device *dev,
unsigned int index,
struct plat_sci_port *p,
static int sci_probe(struct platform_device *dev)
{
- struct plat_sci_port *p = dev_get_platdata(&dev->dev);
- struct sci_port *sp = &sci_ports[dev->id];
- int ret;
+ struct plat_sci_port *p;
+ struct sci_port *sp;
+ int ret, dev_id = dev->id;
/*
* If we've come here via earlyprintk initialization, head off to
if (is_early_platform_device(dev))
return sci_probe_earlyprintk(dev);
+ if (dev->dev.of_node)
+ p = sci_parse_dt(dev, &dev_id);
+ else
+ p = dev_get_platdata(&dev->dev);
+
+ if (!p) {
+ dev_err(&dev->dev, "no setup data supplied\n");
+ return -EINVAL;
+ }
+
+ sp = &sci_ports[dev_id];
platform_set_drvdata(dev, sp);
- ret = sci_probe_single(dev, dev->id, p, sp);
+ ret = sci_probe_single(dev, dev_id, p, sp);
if (ret)
return ret;
.name = "sh-sci",
.owner = THIS_MODULE,
.pm = &sci_dev_pm_ops,
+ .of_match_table = of_match_ptr(of_sci_match),
},
};
#define SCIx_NOT_SUPPORTED (-1)
enum {
+ SCBRR_ALGO_INVALID,
+
SCBRR_ALGO_1, /* ((clk + 16 * bps) / (16 * bps) - 1) */
SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */
SCBRR_ALGO_3, /* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
SCBRR_ALGO_4, /* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
SCBRR_ALGO_5, /* (((clk * 1000 / 32) / bps) - 1) */
SCBRR_ALGO_6, /* HSCIF variable sample rate algorithm */
+
+ SCBRR_NR_ALGOS,
};
#define SCSCR_TIE (1 << 7)
projects / karo-tx-linux.git / commitdiff