]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
Documentation: dt-bindings: Add device-tree binding for ARM SMMUv3 IOMMU
authorWill Deacon <will.deacon@arm.com>
Wed, 27 May 2015 16:25:58 +0000 (17:25 +0100)
committerJoerg Roedel <jroedel@suse.de>
Fri, 29 May 2015 09:12:01 +0000 (11:12 +0200)
This patch adds device-tree bindings for ARM SMMUv3 IOMMU devices.

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
new file mode 100644 (file)
index 0000000..c03eec1
--- /dev/null
@@ -0,0 +1,37 @@
+* ARM SMMUv3 Architecture Implementation
+
+The SMMUv3 architecture is a significant deparature from previous
+revisions, replacing the MMIO register interface with in-memory command
+and event queues and adding support for the ATS and PRI components of
+the PCIe specification.
+
+** SMMUv3 required properties:
+
+- compatible        : Should include:
+
+                      * "arm,smmu-v3" for any SMMUv3 compliant
+                        implementation. This entry should be last in the
+                        compatible list.
+
+- reg               : Base address and size of the SMMU.
+
+- interrupts        : Non-secure interrupt list describing the wired
+                      interrupt sources corresponding to entries in
+                      interrupt-names. If no wired interrupts are
+                      present then this property may be omitted.
+
+- interrupt-names   : When the interrupts property is present, should
+                      include the following:
+                      * "eventq"    - Event Queue not empty
+                      * "priq"      - PRI Queue not empty
+                      * "cmdq-sync" - CMD_SYNC complete
+                      * "gerror"    - Global Error activated
+
+** SMMUv3 optional properties:
+
+- dma-coherent      : Present if DMA operations made by the SMMU (page
+                      table walks, stream table accesses etc) are cache
+                      coherent with the CPU.
+
+                      NOTE: this only applies to the SMMU itself, not
+                      masters connected upstream of the SMMU.