usb: dwc2/gadget: assign TX FIFO dynamically

Because we have not enough memory to have each TX FIFO of size at least
3072 bytes (the maximum single packet size with 3 transactions per
microframe), we create four FIFOs of lenght 1024, and four of length
3072 bytes, and assing them to endpoints dynamically according to
maxpacket size value of given endpoint.

Up to now there were initialized 16 TX FIFOs, but we use only 8 IN
endpoints, so we can split available memory for 8 FIFOs to have more
memory for each one.

It needed to do some small modifications in few places in code, because
there was assumption that TX FIFO numbers assigned to endpoints are the
same as the endpoint numbers, which is not true since we have dynamic
FIFO assigning.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index ba505f14160685683d3fba4c64ca680abf78e65d..bf015ab3b44c80ae76631b3d63268a0701ef5707 100644 (file)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -139,6 +139,7 @@ struct s3c_hsotg_ep {
        unsigned int            last_load;
        unsigned int            fifo_load;
        unsigned short          fifo_size;
+       unsigned short          fifo_index;
 
        unsigned char           dir_in;
        unsigned char           index;
@@ -197,6 +198,7 @@ struct s3c_hsotg {
        int                     fifo_mem;
        unsigned int            dedicated_fifos:1;
        unsigned char           num_of_eps;
+       u32                     fifo_map;
 
        struct dentry           *debug_root;
        struct dentry           *debug_file;

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4c5f516479ac7d39c960e46cdd7dc65a0641a8c8..09f4cbd4fcb951896f331a7a332db9b7012a8618 100644 (file)
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -182,14 +182,29 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 
        /* start at the end of the GNPTXFSIZ, rounded up */
        addr = 2048 + 1024;
-       size = 768;
 
        /*
-        * currently we allocate TX FIFOs for all possible endpoints,
-        * and assume that they are all the same size.
+        * Because we have not enough memory to have each TX FIFO of size at
+        * least 3072 bytes (the maximum single packet size), we create four
+        * FIFOs of lenght 1024, and four of length 3072 bytes, and assing
+        * them to endpoints dynamically according to maxpacket size value of
+        * given endpoint.
         */
 
-       for (ep = 1; ep <= 15; ep++) {
+       /* 256*4=1024 bytes FIFO length */
+       size = 256;
+       for (ep = 1; ep <= 4; ep++) {
+               val = addr;
+               val |= size << FIFOSIZE_DEPTH_SHIFT;
+               WARN_ONCE(addr + size > hsotg->fifo_mem,
+                         "insufficient fifo memory");
+               addr += size;
+
+               writel(val, hsotg->regs + DPTXFSIZN(ep));
+       }
+       /* 768*4=3072 bytes FIFO length */
+       size = 768;
+       for (ep = 5; ep <= 8; ep++) {
                val = addr;
                val |= size << FIFOSIZE_DEPTH_SHIFT;
                WARN_ONCE(addr + size > hsotg->fifo_mem,
@@ -1834,7 +1849,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
                if (dir_in) {
                        int epctl = readl(hsotg->regs + epctl_reg);
 
-                       s3c_hsotg_txfifo_flush(hsotg, idx);
+                       s3c_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
 
                        if ((epctl & DXEPCTL_STALL) &&
                                (epctl & DXEPCTL_EPTYPE_BULK)) {
@@ -1983,6 +1998,7 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
                              int result, bool force)
 {
        struct s3c_hsotg_req *req, *treq;
+       unsigned size;
 
        list_for_each_entry_safe(req, treq, &ep->queue, queue) {
                /*
@@ -1996,9 +2012,11 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
                s3c_hsotg_complete_request(hsotg, ep, req,
                                           result);
        }
-       if (hsotg->dedicated_fifos)
-               if ((readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4 < 3072)
-                       s3c_hsotg_txfifo_flush(hsotg, ep->index);
+       if (!hsotg->dedicated_fifos)
+               return;
+       size = (readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
+       if (size < ep->fifo_size)
+               s3c_hsotg_txfifo_flush(hsotg, ep->fifo_index);
 }
 
 /**
@@ -2439,6 +2457,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
        u32 epctrl;
        u32 mps;
        int dir_in;
+       int i, val, size;
        int ret = 0;
 
        dev_dbg(hsotg->dev,
@@ -2511,17 +2530,8 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
                break;
 
        case USB_ENDPOINT_XFER_INT:
-               if (dir_in) {
-                       /*
-                        * Allocate our TxFNum by simply using the index
-                        * of the endpoint for the moment. We could do
-                        * something better if the host indicates how
-                        * many FIFOs we are expecting to use.
-                        */
-
+               if (dir_in)
                        hs_ep->periodic = 1;
-                       epctrl |= DXEPCTL_TXFNUM(index);
-               }
 
                epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
                break;
@@ -2535,8 +2545,25 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
         * if the hardware has dedicated fifos, we must give each IN EP
         * a unique tx-fifo even if it is non-periodic.
         */
-       if (dir_in && hsotg->dedicated_fifos)
-               epctrl |= DXEPCTL_TXFNUM(index);
+       if (dir_in && hsotg->dedicated_fifos) {
+               size = hs_ep->ep.maxpacket*hs_ep->mc;
+               for (i = 1; i <= 8; ++i) {
+                       if (hsotg->fifo_map & (1<<i))
+                               continue;
+                       val = readl(hsotg->regs + DPTXFSIZN(i));
+                       val = (val >> FIFOSIZE_DEPTH_SHIFT)*4;
+                       if (val < size)
+                               continue;
+                       hsotg->fifo_map |= 1<<i;
+
+                       epctrl |= DXEPCTL_TXFNUM(i);
+                       hs_ep->fifo_index = i;
+                       hs_ep->fifo_size = val;
+                       break;
+               }
+               if (i == 8)
+                       return -ENOMEM;
+       }
 
        /* for non control endpoints, set PID to D0 */
        if (index)
@@ -2583,6 +2610,9 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
        /* terminate all requests with shutdown */
        kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
 
+       hsotg->fifo_map &= ~(1<<hs_ep->fifo_index);
+       hs_ep->fifo_index = 0;
+       hs_ep->fifo_size = 0;
 
        ctrl = readl(hsotg->regs + epctrl_reg);
        ctrl &= ~DXEPCTL_EPENA;
@@ -2974,7 +3004,6 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
                                       struct s3c_hsotg_ep *hs_ep,
                                       int epnum)
 {
-       u32 ptxfifo;
        char *dir;
 
        if (epnum == 0)
@@ -3002,15 +3031,6 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
        usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
        hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
-       /*
-        * Read the FIFO size for the Periodic TX FIFO, even if we're
-        * an OUT endpoint, we may as well do this if in future the
-        * code is changed to make each endpoint's direction changeable.
-        */
-
-       ptxfifo = readl(hsotg->regs + DPTXFSIZN(epnum));
-       hs_ep->fifo_size = FIFOSIZE_DEPTH_GET(ptxfifo) * 4;
-
        /*
         * if we're using dma, we need to set the next-endpoint pointer
         * to be something valid.