]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
staging:iio:light:tsl2583 allocate chip state with iio_dev
authorJonathan Cameron <jic23@cam.ac.uk>
Fri, 12 Aug 2011 16:08:52 +0000 (17:08 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 23 Aug 2011 20:31:12 +0000 (13:31 -0700)
There are some unusual corners in the probe function of this
driver, so may need another look.

V2: Now with the check for allocation success not inverted.
V3: Now with the i2c devdata calls actually being correctly cast.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Jon Brenner <jbrenner@TAOSinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/iio/light/tsl2583.c

index 296d0ffa0b0985f7f3c1d190591e6775123fb4e6..f75fe85638997a0ae8a50b2fce142b1993417fe2 100644 (file)
@@ -87,7 +87,6 @@ struct taos_settings {
 struct tsl2583_chip {
        struct mutex als_mutex;
        struct i2c_client *client;
-       struct iio_dev *iio_dev;
        struct taos_als_info als_cur_info;
        struct taos_settings taos_settings;
        int als_time_scale;
@@ -159,8 +158,7 @@ static void taos_defaults(struct tsl2583_chip *chip)
 static int
 taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len)
 {
-       int ret;
-       int i;
+       int i, ret;
 
        for (i = 0; i < len; i++) {
                /* select register to write */
@@ -191,47 +189,47 @@ taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len)
  * the array are then used along with the time scale factor array values, to
  * calculate the lux.
  */
-static int taos_get_lux(struct i2c_client *client)
+static int taos_get_lux(struct iio_dev *indio_dev)
 {
        u16 ch0, ch1; /* separated ch0/ch1 data from device */
        u32 lux; /* raw lux calculated from device data */
        u32 ratio;
        u8 buf[5];
        struct taos_lux *p;
-       struct tsl2583_chip *chip = i2c_get_clientdata(client);
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        int i, ret;
        u32 ch0lux = 0;
        u32 ch1lux = 0;
 
        if (mutex_trylock(&chip->als_mutex) == 0) {
-               dev_info(&client->dev, "taos_get_lux device is busy\n");
+               dev_info(&chip->client->dev, "taos_get_lux device is busy\n");
                return chip->als_cur_info.lux; /* busy, so return LAST VALUE */
        }
 
        if (chip->taos_chip_status != TSL258X_CHIP_WORKING) {
                /* device is not enabled */
-               dev_err(&client->dev, "taos_get_lux device is not enabled\n");
+               dev_err(&chip->client->dev, "taos_get_lux device is not enabled\n");
                ret = -EBUSY ;
                goto out_unlock;
        }
 
-       ret = taos_i2c_read(client, (TSL258X_CMD_REG), &buf[0], 1);
+       ret = taos_i2c_read(chip->client, (TSL258X_CMD_REG), &buf[0], 1);
        if (ret < 0) {
-               dev_err(&client->dev, "taos_get_lux failed to read CMD_REG\n");
+               dev_err(&chip->client->dev, "taos_get_lux failed to read CMD_REG\n");
                goto out_unlock;
        }
        /* is data new & valid */
        if (!(buf[0] & TSL258X_STA_ADC_INTR)) {
-               dev_err(&client->dev, "taos_get_lux data not valid\n");
+               dev_err(&chip->client->dev, "taos_get_lux data not valid\n");
                ret = chip->als_cur_info.lux; /* return LAST VALUE */
                goto out_unlock;
        }
 
        for (i = 0; i < 4; i++) {
                int reg = TSL258X_CMD_REG | (TSL258X_ALS_CHAN0LO + i);
-               ret = taos_i2c_read(client, reg, &buf[i], 1);
+               ret = taos_i2c_read(chip->client, reg, &buf[i], 1);
                if (ret < 0) {
-                       dev_err(&client->dev, "taos_get_lux failed to read"
+                       dev_err(&chip->client->dev, "taos_get_lux failed to read"
                                " register %x\n", reg);
                        goto out_unlock;
                }
@@ -239,11 +237,12 @@ static int taos_get_lux(struct i2c_client *client)
 
        /* clear status, really interrupt status (interrupts are off), but
         * we use the bit anyway - don't forget 0x80 - this is a command*/
-       ret = i2c_smbus_write_byte(client,
-       (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN | TSL258X_CMD_ALS_INT_CLR));
+       ret = i2c_smbus_write_byte(chip->client,
+                                  (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
+                                   TSL258X_CMD_ALS_INT_CLR));
 
        if (ret < 0) {
-               dev_err(&client->dev,
+               dev_err(&chip->client->dev,
                        "taos_i2c_write_command failed in taos_get_lux, err = %d\n",
                        ret);
                goto out_unlock; /* have no data, so return failure */
@@ -285,7 +284,7 @@ static int taos_get_lux(struct i2c_client *client)
 
        /* note: lux is 31 bit max at this point */
        if (ch1lux > ch0lux) {
-               dev_dbg(&client->dev, "No Data - Return last value\n");
+               dev_dbg(&chip->client->dev, "No Data - Return last value\n");
                ret = chip->als_cur_info.lux = 0;
                goto out_unlock;
        }
@@ -319,54 +318,56 @@ out_unlock:
  * to derive actual lux).
  * Return updated gain_trim value.
  */
-int taos_als_calibrate(struct i2c_client *client)
+static int taos_als_calibrate(struct iio_dev *indio_dev)
 {
-       struct tsl2583_chip *chip = i2c_get_clientdata(client);
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        u8 reg_val;
        unsigned int gain_trim_val;
        int ret;
        int lux_val;
 
-       ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | TSL258X_CNTRL));
+       ret = i2c_smbus_write_byte(chip->client,
+                                  (TSL258X_CMD_REG | TSL258X_CNTRL));
        if (ret < 0) {
-               dev_err(&client->dev,
+               dev_err(&chip->client->dev,
                        "taos_als_calibrate failed to reach the CNTRL register, ret=%d\n",
                        ret);
                return ret;
        }
 
-       reg_val = i2c_smbus_read_byte(client);
+       reg_val = i2c_smbus_read_byte(chip->client);
        if ((reg_val & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON))
                        != (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) {
-               dev_err(&client->dev,
+               dev_err(&chip->client->dev,
                        "taos_als_calibrate failed: device not powered on with ADC enabled\n");
                return -1;
        }
 
-       ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | TSL258X_CNTRL));
+       ret = i2c_smbus_write_byte(chip->client,
+                                  (TSL258X_CMD_REG | TSL258X_CNTRL));
        if (ret < 0) {
-               dev_err(&client->dev,
+               dev_err(&chip->client->dev,
                        "taos_als_calibrate failed to reach the STATUS register, ret=%d\n",
                        ret);
                return ret;
        }
-       reg_val = i2c_smbus_read_byte(client);
+       reg_val = i2c_smbus_read_byte(chip->client);
 
        if ((reg_val & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) {
-               dev_err(&client->dev,
+               dev_err(&chip->client->dev,
                        "taos_als_calibrate failed: STATUS - ADC not valid.\n");
                return -ENODATA;
        }
-       lux_val = taos_get_lux(client);
+       lux_val = taos_get_lux(indio_dev);
        if (lux_val < 0) {
-               dev_err(&client->dev, "taos_als_calibrate failed to get lux\n");
+               dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n");
                return lux_val;
        }
        gain_trim_val = (unsigned int) (((chip->taos_settings.als_cal_target)
                        * chip->taos_settings.als_gain_trim) / lux_val);
 
        if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
-               dev_err(&client->dev,
+               dev_err(&chip->client->dev,
                        "taos_als_calibrate failed: trim_val of %d is out of range\n",
                        gain_trim_val);
                return -ENODATA;
@@ -380,21 +381,21 @@ int taos_als_calibrate(struct i2c_client *client)
  * Turn the device on.
  * Configuration must be set before calling this function.
  */
-static int taos_chip_on(struct i2c_client *client)
+static int taos_chip_on(struct iio_dev *indio_dev)
 {
        int i;
-       int ret = 0;
+       int ret;
        u8 *uP;
        u8 utmp;
        int als_count;
        int als_time;
-       struct tsl2583_chip *chip = i2c_get_clientdata(client);
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
 
        /* and make sure we're not already on */
        if (chip->taos_chip_status == TSL258X_CHIP_WORKING) {
                /* if forcing a register update - turn off, then on */
-               dev_info(&client->dev, "device is already enabled\n");
-               return   -EINVAL;
+               dev_info(&chip->client->dev, "device is already enabled\n");
+               return -EINVAL;
        }
 
        /* determine als integration regster */
@@ -416,20 +417,21 @@ static int taos_chip_on(struct i2c_client *client)
        /* TSL258x Specific power-on / adc enable sequence
         * Power on the device 1st. */
        utmp = TSL258X_CNTL_PWR_ON;
-       ret = i2c_smbus_write_byte_data(client,
-               TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
+       ret = i2c_smbus_write_byte_data(chip->client,
+                                       TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
        if (ret < 0) {
-               dev_err(&client->dev, "taos_chip_on failed on CNTRL reg.\n");
+               dev_err(&chip->client->dev, "taos_chip_on failed on CNTRL reg.\n");
                return -1;
        }
 
        /* Use the following shadow copy for our delay before enabling ADC.
         * Write all the registers. */
        for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
-               ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG + i,
+               ret = i2c_smbus_write_byte_data(chip->client,
+                                               TSL258X_CMD_REG + i,
                                                *uP++);
                if (ret < 0) {
-                       dev_err(&client->dev,
+                       dev_err(&chip->client->dev,
                                "taos_chip_on failed on reg %d.\n", i);
                        return -1;
                }
@@ -439,10 +441,11 @@ static int taos_chip_on(struct i2c_client *client)
        /* NOW enable the ADC
         * initialize the desired mode of operation */
        utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
-       ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG | TSL258X_CNTRL,
+       ret = i2c_smbus_write_byte_data(chip->client,
+                                       TSL258X_CMD_REG | TSL258X_CNTRL,
                                        utmp);
        if (ret < 0) {
-               dev_err(&client->dev, "taos_chip_on failed on 2nd CTRL reg.\n");
+               dev_err(&chip->client->dev, "taos_chip_on failed on 2nd CTRL reg.\n");
                return -1;
        }
        chip->taos_chip_status = TSL258X_CHIP_WORKING;
@@ -450,33 +453,26 @@ static int taos_chip_on(struct i2c_client *client)
        return ret;
 }
 
-static int taos_chip_off(struct i2c_client *client)
+static int taos_chip_off(struct iio_dev *indio_dev)
 {
-       struct tsl2583_chip *chip = i2c_get_clientdata(client);
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        int ret;
 
        /* turn device off */
        chip->taos_chip_status = TSL258X_CHIP_SUSPENDED;
-       ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG | TSL258X_CNTRL,
+       ret = i2c_smbus_write_byte_data(chip->client,
+                                       TSL258X_CMD_REG | TSL258X_CNTRL,
                                        0x00);
        return ret;
 }
 
 /* Sysfs Interface Functions */
-static ssize_t taos_device_id(struct device *dev,
-struct device_attribute *attr, char *buf)
-{
-       struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
-
-       return sprintf(buf, "%s\n", chip->client->name);
-}
 
 static ssize_t taos_power_state_show(struct device *dev,
        struct device_attribute *attr, char *buf)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
 
        return sprintf(buf, "%d\n", chip->taos_chip_status);
 }
@@ -485,16 +481,15 @@ static ssize_t taos_power_state_store(struct device *dev,
        struct device_attribute *attr, const char *buf, size_t len)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
        unsigned long value;
 
        if (strict_strtoul(buf, 0, &value))
                return -EINVAL;
 
        if (value == 0)
-               taos_chip_off(chip->client);
+               taos_chip_off(indio_dev);
        else
-               taos_chip_on(chip->client);
+               taos_chip_on(indio_dev);
 
        return len;
 }
@@ -503,7 +498,7 @@ static ssize_t taos_gain_show(struct device *dev,
        struct device_attribute *attr, char *buf)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        char gain[4] = {0};
 
        switch (chip->taos_settings.als_gain) {
@@ -528,7 +523,7 @@ static ssize_t taos_gain_store(struct device *dev,
        struct device_attribute *attr, const char *buf, size_t len)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        unsigned long value;
 
        if (strict_strtoul(buf, 0, &value))
@@ -565,7 +560,7 @@ static ssize_t taos_als_time_show(struct device *dev,
        struct device_attribute *attr, char *buf)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
 
        return sprintf(buf, "%d\n", chip->taos_settings.als_time);
 }
@@ -574,7 +569,7 @@ static ssize_t taos_als_time_store(struct device *dev,
        struct device_attribute *attr, const char *buf, size_t len)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        unsigned long value;
 
        if (strict_strtoul(buf, 0, &value))
@@ -586,7 +581,7 @@ static ssize_t taos_als_time_store(struct device *dev,
        if (value % 50)
                return -EINVAL;
 
-        chip->taos_settings.als_time = value;
+       chip->taos_settings.als_time = value;
 
        return len;
 }
@@ -602,7 +597,7 @@ static ssize_t taos_als_trim_show(struct device *dev,
        struct device_attribute *attr, char *buf)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
 
        return sprintf(buf, "%d\n", chip->taos_settings.als_gain_trim);
 }
@@ -611,7 +606,7 @@ static ssize_t taos_als_trim_store(struct device *dev,
        struct device_attribute *attr, const char *buf, size_t len)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        unsigned long value;
 
        if (strict_strtoul(buf, 0, &value))
@@ -627,7 +622,7 @@ static ssize_t taos_als_cal_target_show(struct device *dev,
        struct device_attribute *attr, char *buf)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
 
        return sprintf(buf, "%d\n", chip->taos_settings.als_cal_target);
 }
@@ -636,7 +631,7 @@ static ssize_t taos_als_cal_target_store(struct device *dev,
        struct device_attribute *attr, const char *buf, size_t len)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        unsigned long value;
 
        if (strict_strtoul(buf, 0, &value))
@@ -651,27 +646,26 @@ static ssize_t taos_als_cal_target_store(struct device *dev,
 static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr,
        char *buf)
 {
-       struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
-       int lux;
+       int ret;
 
-       lux = taos_get_lux(chip->client);
+       ret = taos_get_lux(dev_get_drvdata(dev));
+       if (ret < 0)
+               return ret;
 
-       return sprintf(buf, "%d\n", lux);
+       return sprintf(buf, "%d\n", ret);
 }
 
 static ssize_t taos_do_calibrate(struct device *dev,
        struct device_attribute *attr, const char *buf, size_t len)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
        unsigned long value;
 
        if (strict_strtoul(buf, 0, &value))
                return -EINVAL;
 
        if (value == 1)
-               taos_als_calibrate(chip->client);
+               taos_als_calibrate(indio_dev);
 
        return len;
 }
@@ -703,8 +697,8 @@ static ssize_t taos_luxtable_store(struct device *dev,
        struct device_attribute *attr, const char *buf, size_t len)
 {
        struct iio_dev *indio_dev = dev_get_drvdata(dev);
-       struct tsl2583_chip *chip = indio_dev->dev_data;
-       int value[ARRAY_SIZE(taos_device_lux)];
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
+       int value[ARRAY_SIZE(taos_device_lux)*3 + 1];
        int n;
 
        get_options(buf, ARRAY_SIZE(value), value);
@@ -725,18 +719,17 @@ static ssize_t taos_luxtable_store(struct device *dev,
        }
 
        if (chip->taos_chip_status == TSL258X_CHIP_WORKING)
-               taos_chip_off(chip->client);
+               taos_chip_off(indio_dev);
 
        /* Zero out the table */
        memset(taos_device_lux, 0, sizeof(taos_device_lux));
        memcpy(taos_device_lux, &value[1], (value[0] * 4));
 
-       taos_chip_on(chip->client);
+       taos_chip_on(indio_dev);
 
        return len;
 }
 
-static DEVICE_ATTR(name, S_IRUGO, taos_device_id, NULL);
 static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
                taos_power_state_show, taos_power_state_store);
 
@@ -762,7 +755,6 @@ static DEVICE_ATTR(illuminance0_lux_table, S_IRUGO | S_IWUSR,
                taos_luxtable_show, taos_luxtable_store);
 
 static struct attribute *sysfs_attrs_ctrl[] = {
-       &dev_attr_name.attr,
        &dev_attr_power_state.attr,
        &dev_attr_illuminance0_calibscale.attr,                 /* Gain  */
        &dev_attr_illuminance0_calibscale_available.attr,
@@ -798,9 +790,10 @@ static const struct iio_info tsl2583_info = {
 static int __devinit taos_probe(struct i2c_client *clientp,
                      const struct i2c_device_id *idp)
 {
-       int i, ret = 0;
+       int i, ret;
        unsigned char buf[TSL258X_MAX_DEVICE_REGS];
-       static struct tsl2583_chip *chip;
+       struct tsl2583_chip *chip;
+       struct iio_dev *indio_dev;
 
        if (!i2c_check_functionality(clientp->adapter,
                I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -810,12 +803,15 @@ static int __devinit taos_probe(struct i2c_client *clientp,
                return -EOPNOTSUPP;
        }
 
-       chip = kzalloc(sizeof(struct tsl2583_chip), GFP_KERNEL);
-       if (!chip)
-               return -ENOMEM;
-
+       indio_dev = iio_allocate_device(sizeof(*chip));
+       if (indio_dev == NULL) {
+               ret = -ENOMEM;
+               dev_err(&clientp->dev, "iio allocation failed\n");
+               goto fail1;
+       }
+       chip = iio_priv(indio_dev);
        chip->client = clientp;
-       i2c_set_clientdata(clientp, chip);
+       i2c_set_clientdata(clientp, indio_dev);
 
        mutex_init(&chip->als_mutex);
        chip->taos_chip_status = TSL258X_CHIP_UNKNOWN;
@@ -827,14 +823,14 @@ static int __devinit taos_probe(struct i2c_client *clientp,
                if (ret < 0) {
                        dev_err(&clientp->dev, "i2c_smbus_write_bytes() to cmd "
                                "reg failed in taos_probe(), err = %d\n", ret);
-                       goto fail1;
+                       goto fail2;
                }
                ret = i2c_smbus_read_byte(clientp);
                if (ret < 0) {
                        dev_err(&clientp->dev, "i2c_smbus_read_byte from "
                                "reg failed in taos_probe(), err = %d\n", ret);
 
-                       goto fail1;
+                       goto fail2;
                }
                buf[i] = ret;
        }
@@ -842,58 +838,50 @@ static int __devinit taos_probe(struct i2c_client *clientp,
        if (!taos_tsl258x_device(buf)) {
                dev_info(&clientp->dev, "i2c device found but does not match "
                        "expected id in taos_probe()\n");
-               goto fail1;
+               goto fail2;
        }
 
        ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL));
        if (ret < 0) {
                dev_err(&clientp->dev, "i2c_smbus_write_byte() to cmd reg "
                        "failed in taos_probe(), err = %d\n", ret);
-               goto fail1;
+               goto fail2;
        }
 
-       chip->iio_dev = iio_allocate_device(0);
-       if (!chip->iio_dev) {
-               ret = -ENOMEM;
-               dev_err(&clientp->dev, "iio allocation failed\n");
-               goto fail1;
-       }
-
-       chip->iio_dev->info = &tsl2583_info;
-       chip->iio_dev->dev.parent = &clientp->dev;
-       chip->iio_dev->dev_data = (void *)(chip);
-       chip->iio_dev->modes = INDIO_DIRECT_MODE;
-       ret = iio_device_register(chip->iio_dev);
+       indio_dev->info = &tsl2583_info;
+       indio_dev->dev.parent = &clientp->dev;
+       indio_dev->modes = INDIO_DIRECT_MODE;
+       indio_dev->name = chip->client->name;
+       ret = iio_device_register(indio_dev);
        if (ret) {
                dev_err(&clientp->dev, "iio registration failed\n");
-               goto fail1;
+               goto fail2;
        }
 
        /* Load up the V2 defaults (these are hard coded defaults for now) */
        taos_defaults(chip);
 
        /* Make sure the chip is on */
-       taos_chip_on(clientp);
+       taos_chip_on(indio_dev);
 
        dev_info(&clientp->dev, "Light sensor found.\n");
-
        return 0;
-
 fail1:
-       kfree(chip);
-
+       iio_free_device(indio_dev);
+fail2:
        return ret;
 }
 
 static int taos_suspend(struct i2c_client *client, pm_message_t state)
 {
-       struct tsl2583_chip *chip = i2c_get_clientdata(client);
+       struct iio_dev *indio_dev = i2c_get_clientdata(client);
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        int ret = 0;
 
        mutex_lock(&chip->als_mutex);
 
        if (chip->taos_chip_status == TSL258X_CHIP_WORKING) {
-               ret = taos_chip_off(client);
+               ret = taos_chip_off(indio_dev);
                chip->taos_chip_status = TSL258X_CHIP_SUSPENDED;
        }
 
@@ -903,13 +891,14 @@ static int taos_suspend(struct i2c_client *client, pm_message_t state)
 
 static int taos_resume(struct i2c_client *client)
 {
-       struct tsl2583_chip *chip = i2c_get_clientdata(client);
+       struct iio_dev *indio_dev = i2c_get_clientdata(client);
+       struct tsl2583_chip *chip = iio_priv(indio_dev);
        int ret = 0;
 
        mutex_lock(&chip->als_mutex);
 
        if (chip->taos_chip_status == TSL258X_CHIP_SUSPENDED)
-               ret = taos_chip_on(client);
+               ret = taos_chip_on(indio_dev);
 
        mutex_unlock(&chip->als_mutex);
        return ret;
@@ -918,11 +907,8 @@ static int taos_resume(struct i2c_client *client)
 
 static int __devexit taos_remove(struct i2c_client *client)
 {
-       struct tsl2583_chip *chip = i2c_get_clientdata(client);
-
-       iio_device_unregister(chip->iio_dev);
+       iio_device_unregister(i2c_get_clientdata(client));
 
-       kfree(chip);
        return 0;
 }