-subdir-y := accounting arm auxdisplay blackfin connector \
+subdir-y := accounting auxdisplay blackfin connector \
filesystems filesystems ia64 laptops mic misc-devices \
networking pcmcia prctl ptp spi timers vDSO video4linux \
watchdog
+++ /dev/null
-subdir-y := SH-Mobile
+++ /dev/null
-# List of programs to build
-hostprogs-y := vrl4
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_vrl4.o += -I$(objtree)/usr/include -I$(srctree)/tools/include
+++ /dev/null
-/*
- * vrl4 format generator
- *
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-/*
- * usage: vrl4 < zImage > out
- * dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
- *
- * Reads a zImage from stdin and writes a vrl4 image to stdout.
- * In practice this means writing a padded vrl4 header to stdout followed
- * by the zImage.
- *
- * The padding places the zImage at ALIGN bytes into the output.
- * The vrl4 uses ALIGN + START_BASE as the start_address.
- * This is where the mask ROM will jump to after verifying the header.
- *
- * The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
- * That is, the mask ROM will load the padded header (ALIGN bytes)
- * And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
- * whichever is smaller.
- *
- * The zImage is not modified in any way.
- */
-
-#define _BSD_SOURCE
-#include <endian.h>
-#include <unistd.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <errno.h>
-#include <tools/endian.h>
-
-struct hdr {
- uint32_t magic1;
- uint32_t reserved1;
- uint32_t magic2;
- uint32_t reserved2;
- uint16_t copy_size;
- uint16_t boot_options;
- uint32_t reserved3;
- uint32_t start_address;
- uint32_t reserved4;
- uint32_t reserved5;
- char reserved6[308];
-};
-
-#define DECLARE_HDR(h) \
- struct hdr (h) = { \
- .magic1 = htole32(0xea000000), \
- .reserved1 = htole32(0x56), \
- .magic2 = htole32(0xe59ff008), \
- .reserved3 = htole16(0x1) }
-
-/* Align to 512 bytes, the MMCIF sector size */
-#define ALIGN_BITS 9
-#define ALIGN (1 << ALIGN_BITS)
-
-#define START_BASE 0xe55b0000
-
-/*
- * With an alignment of 512 the header uses the first sector.
- * There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
- * So there are 127 sectors left for the boot programme. But in practice
- * Only a small portion of a zImage is needed, 16 sectors should be more
- * than enough.
- *
- * Note that this sets how much of the zImage is copied by the mask ROM.
- * The entire zImage is present after the header and is loaded
- * by the code in the boot program (which is the first portion of the zImage).
- */
-#define MAX_BOOT_PROG_LEN (16 * 512)
-
-#define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1))
-
-static ssize_t do_read(int fd, void *buf, size_t count)
-{
- size_t offset = 0;
- ssize_t l;
-
- while (offset < count) {
- l = read(fd, buf + offset, count - offset);
- if (!l)
- break;
- if (l < 0) {
- if (errno == EAGAIN || errno == EWOULDBLOCK)
- continue;
- perror("read");
- return -1;
- }
- offset += l;
- }
-
- return offset;
-}
-
-static ssize_t do_write(int fd, const void *buf, size_t count)
-{
- size_t offset = 0;
- ssize_t l;
-
- while (offset < count) {
- l = write(fd, buf + offset, count - offset);
- if (l < 0) {
- if (errno == EAGAIN || errno == EWOULDBLOCK)
- continue;
- perror("write");
- return -1;
- }
- offset += l;
- }
-
- return offset;
-}
-
-static ssize_t write_zero(int fd, size_t len)
-{
- size_t i = len;
-
- while (i--) {
- const char x = 0;
- if (do_write(fd, &x, 1) < 0)
- return -1;
- }
-
- return len;
-}
-
-int main(void)
-{
- DECLARE_HDR(hdr);
- char boot_program[MAX_BOOT_PROG_LEN];
- size_t aligned_hdr_len, alligned_prog_len;
- ssize_t prog_len;
-
- prog_len = do_read(0, boot_program, sizeof(boot_program));
- if (prog_len <= 0)
- return -1;
-
- aligned_hdr_len = ROUND_UP(sizeof(hdr));
- hdr.start_address = htole32(START_BASE + aligned_hdr_len);
- alligned_prog_len = ROUND_UP(prog_len);
- hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
-
- if (do_write(1, &hdr, sizeof(hdr)) < 0)
- return -1;
- if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
- return -1;
-
- if (do_write(1, boot_program, prog_len) < 0)
- return 1;
-
- /* Write out the rest of the kernel */
- while (1) {
- prog_len = do_read(0, boot_program, sizeof(boot_program));
- if (prog_len < 0)
- return 1;
- if (prog_len == 0)
- break;
- if (do_write(1, boot_program, prog_len) < 0)
- return 1;
- }
-
- return 0;
-}
+++ /dev/null
-ROM-able zImage boot from MMC
------------------------------
-
-An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
-SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
-
-This is achieved by the mask ROM loading the first portion of the image into
-MERAM and then jumping to it. This portion contains loader code which
-copies the entire image to SDRAM and jumps to it. From there the zImage
-boot code proceeds as normal, uncompressing the image into its final
-location and then jumping to it.
-
-This code has been tested on an AP4EB board using the developer 1A eMMC
-boot mode which is configured using the following jumper settings.
-The board used for testing required a patched mask ROM in order for
-this mode to function.
-
- 8 7 6 5 4 3 2 1
- x|x|x|x|x| |x|
-S4 -+-+-+-+-+-+-+-
- | | | | |x| |x on
-
-The zImage must be written to the MMC card at sector 1 (512 bytes) in
-vrl4 format. A utility vrl4 is supplied to accomplish this.
-
-e.g.
- vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
-
-A dual-voltage MMC 4.0 card was used for testing.
+++ /dev/null
-ROM-able zImage boot from eSD
------------------------------
-
-An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and
-SuperH Mobile ARM will to boot directly from the SDHI hardware block.
-
-This is achieved by the mask ROM loading the first portion of the image into
-MERAM and then jumping to it. This portion contains loader code which
-copies the entire image to SDRAM and jumps to it. From there the zImage
-boot code proceeds as normal, uncompressing the image into its final
-location and then jumping to it.
-
-This code has been tested on an mackerel board using the developer 1A eSD
-boot mode which is configured using the following jumper settings.
-
- 8 7 6 5 4 3 2 1
- x|x|x|x| |x|x|
-S4 -+-+-+-+-+-+-+-
- | | | |x| | |x on
-
-The eSD card needs to be present in SDHI slot 1 (CN7).
-As such S1 and S33 also need to be configured as per
-the notes in arch/arm/mach-shmobile/board-mackerel.c.
-
-A partial zImage must be written to physical partition #1 (boot)
-of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to
-accomplish this.
-
-e.g.
- vrl4 < zImage | dd of=/dev/sdX bs=512 count=17
-
-A full copy of _the same_ zImage should be written to physical partition #1
-(boot) of the eSD at sector 0. This should _not_ be in vrl4 format.
-
- vrl4 < zImage | dd of=/dev/sdX bs=512
-
-Note: The commands above assume that the physical partition has been
-switched. No such facility currently exists in the Linux Kernel.
-
-Physical partitions are described in the eSD specification. At the time of
-writing they are not the same as partitions that are typically configured
-using fdisk and visible through /proc/partitions
compatible = "renesas,emev2"
- RZ/A1H (R7S72100)
compatible = "renesas,r7s72100"
- - SH-Mobile AP4 (R8A73720/SH7372)
- compatible = "renesas,sh7372"
- SH-Mobile AG5 (R8A73A00/SH73A0)
compatible = "renesas,sh73a0"
- R-Mobile APE6 (R8A73A40)
compatible = "renesas,alt", "renesas,r8a7794"
- APE6-EVM
compatible = "renesas,ape6evm", "renesas,r8a73a4"
- - APE6-EVM - Reference Device Tree Implementation
- compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"
- Atmark Techno Armadillo-800 EVA
compatible = "renesas,armadillo800eva"
- BOCK-W
compatible = "renesas,kzm9d", "renesas,emev2"
- Kyoto Microcomputer Co. KZM-A9-GT
compatible = "renesas,kzm9g", "renesas,sh73a0"
- - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation
- compatible = "renesas,kzm9g-reference", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
- - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd)
- compatible = "renesas,mackerel"
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
--- /dev/null
+* Renesas R8A7778 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7778. It includes two PLLs and
+several fixed ratio dividers
+
+Required Properties:
+
+ - compatible: Must be "renesas,r8a7778-cpg-clocks"
+ - reg: Base address and length of the memory resource used by the CPG
+ - #clock-cells: Must be 1
+ - clock-output-names: The names of the clocks. Supported clocks are
+ "plla", "pllb", "b", "out", "p", "s", and "s1".
+
+
+Example
+-------
+
+ cpg_clocks: cpg_clocks@ffc80000 {
+ compatible = "renesas,r8a7778-cpg-clocks";
+ reg = <0xffc80000 0x80>;
+ #clock-cells = <1>;
+ clocks = <&extal_clk>;
+ clock-output-names = "plla", "pllb", "b",
+ "out", "p", "s", "s1";
+ };
nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset
nxp,pcf8563 Real-time clock/calendar
nxp,pcf85063 Tiny Real-Time Clock
+oki,ml86v7667 OKI ML86V7667 video decoder
ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
pericom,pt7c4338 Real-time Clock Module
plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
fallback.
Examples with soctypes are:
+ - "renesas,sysc-r8a73a4" (R-Mobile APE6)
- "renesas,sysc-r8a7740" (R-Mobile A1)
- "renesas,sysc-sh73a0" (SH-Mobile AG5)
- reg: Two address start and address range blocks for the device:
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
-F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/kzm9g_defconfig
-F: arch/arm/configs/mackerel_defconfig
F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/include/debug/renesas-scif.S
help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91
- bool "Atmel AT91"
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select IRQ_DOMAIN
- select PINCTRL
- select PINCTRL_AT91
- select SOC_BUS
- select USE_OF
- help
- This enables support for systems based on Atmel
- AT91RM9200, AT91SAM9 and SAMA5 processors.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_MACH_CLKDEV
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select MULTI_IRQ_HANDLER
int
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
- default AT91_TIMER_HZ if ARCH_AT91
+ default 128 if SOC_AT91RM9200
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
-choice
- prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
- depends on ZBOOT_ROM && ARCH_SH7372
- default ZBOOT_ROM_NONE
- help
- Include experimental SD/MMC loading code in the ROM-able zImage.
- With this enabled it is possible to write the ROM-able zImage
- kernel image to an MMC or SD card and boot the kernel straight
- from the reset vector. At reset the processor Mask ROM will load
- the first part of the ROM-able zImage which in turn loads the
- rest the kernel image to RAM.
-
-config ZBOOT_ROM_NONE
- bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
- help
- Do not load image from SD or MMC
-
-config ZBOOT_ROM_MMCIF
- bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
- help
- Load image from MMCIF hardware block.
-
-config ZBOOT_ROM_SH_MOBILE_SDHI
- bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
- help
- Load image from SDHI hardware block
-
-endchoice
-
config ARM_APPENDED_DTB
bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
depends on OF
via SCIF2 on Renesas R-Car E2 (R8A7794).
config DEBUG_RMOBILE_SCIFA0
- bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372"
- depends on ARCH_R8A73A4 || ARCH_SH7372
+ bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
+ depends on ARCH_R8A73A4
help
Say Y here if you want kernel low-level debugging support
- via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile
- AP4 (SH7372).
+ via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).
config DEBUG_RMOBILE_SCIFA1
bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
- PLAT_SAMSUNG || ARCH_EFM32
+ PLAT_SAMSUNG || ARCH_EFM32 || \
+ ARCH_SHMOBILE_LEGACY
default "mach/uncompress.h"
config EARLY_PRINTK
OBJS =
-# Ensure that MMCIF loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
-OBJS += mmcif-sh7372.o
-endif
-
-# Ensure that SDHI loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
-OBJS += sdhi-shmobile.o
-OBJS += sdhi-sh7372.o
-endif
-
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o
OBJS += misc.o decompress.o
/* load board-specific initialization code */
#include <mach/zboot.h>
-#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
- /* Load image from MMC/SD */
- adr sp, __tmp_stack + 256
- ldr r0, __image_start
- ldr r1, __image_end
- subs r1, r1, r0
- ldr r0, __load_base
- bl mmc_loader
-
- /* Jump to loaded code */
- ldr r0, __loaded
- ldr r1, __image_start
- sub r0, r0, r1
- ldr r1, __load_base
- add pc, r0, r1
-
-__image_start:
- .long _start
-__image_end:
- .long _got_end
-__load_base:
- .long MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
-__loaded:
- .long __continue
- .align
-__tmp_stack:
- .space 256
-__continue:
-#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
-
adr r0, dtb_info
ldmia r0, {r1, r3, r4, r5, r7}
+++ /dev/null
-/*
- * sh7372 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/boot.h>
-#include <mach/mmc.h>
-
-#define MMCIF_BASE (void __iomem *)0xe6bd0000
-
-#define PORT84CR (void __iomem *)0xe6050054
-#define PORT85CR (void __iomem *)0xe6050055
-#define PORT86CR (void __iomem *)0xe6050056
-#define PORT87CR (void __iomem *)0xe6050057
-#define PORT88CR (void __iomem *)0xe6050058
-#define PORT89CR (void __iomem *)0xe6050059
-#define PORT90CR (void __iomem *)0xe605005a
-#define PORT91CR (void __iomem *)0xe605005b
-#define PORT92CR (void __iomem *)0xe605005c
-#define PORT99CR (void __iomem *)0xe6050063
-
-#define SMSTPCR3 (void __iomem *)0xe615013c
-
-/* SH7372 specific MMCIF loader
- *
- * loads the zImage from an MMC card starting from block 1.
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 2 (=byte 1024) on the media
- *
- * Use the following line to write the vrl4 formated zImage
- * to an MMC card
- * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
- */
-asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
-{
- mmc_init_progress();
- mmc_update_progress(MMC_PROGRESS_ENTER);
-
- /* Initialise MMC
- * registers: PORT84CR-PORT92CR
- * (MMCD0_0-MMCD0_7,MMCCMD0 Control)
- * value: 0x04 - select function 4
- */
- __raw_writeb(0x04, PORT84CR);
- __raw_writeb(0x04, PORT85CR);
- __raw_writeb(0x04, PORT86CR);
- __raw_writeb(0x04, PORT87CR);
- __raw_writeb(0x04, PORT88CR);
- __raw_writeb(0x04, PORT89CR);
- __raw_writeb(0x04, PORT90CR);
- __raw_writeb(0x04, PORT91CR);
- __raw_writeb(0x04, PORT92CR);
-
- /* Initialise MMC
- * registers: PORT99CR (MMCCLK0 Control)
- * value: 0x10 | 0x04 - enable output | select function 4
- */
- __raw_writeb(0x14, PORT99CR);
-
- /* Enable clock to MMC hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
-
- mmc_update_progress(MMC_PROGRESS_INIT);
-
- /* setup MMCIF hardware */
- sh_mmcif_boot_init(MMCIF_BASE);
-
- mmc_update_progress(MMC_PROGRESS_LOAD);
-
- /* load kernel via MMCIF interface */
- sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
- (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
-
-
- /* Disable clock to MMC hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
-
- mmc_update_progress(MMC_PROGRESS_DONE);
-}
+++ /dev/null
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <mach/mmc.h>
-#include <linux/mmc/boot.h>
-#include <linux/mmc/tmio.h>
-
-#include "sdhi-shmobile.h"
-
-#define PORT179CR 0xe60520b3
-#define PORT180CR 0xe60520b4
-#define PORT181CR 0xe60520b5
-#define PORT182CR 0xe60520b6
-#define PORT183CR 0xe60520b7
-#define PORT184CR 0xe60520b8
-
-#define SMSTPCR3 0xe615013c
-
-#define CR_INPUT_ENABLE 0x10
-#define CR_FUNCTION1 0x01
-
-#define SDHI1_BASE (void __iomem *)0xe6860000
-#define SDHI_BASE SDHI1_BASE
-
-/* SuperH Mobile SDHI loader
- *
- * loads the zImage from an SD card starting from block 0
- * on physical partition 1
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 1 (=byte 512) of physical partition 1
- *
- * Use the following line to write the vrl4 formated zImage
- * to an SD card
- * # dd if=vrl4.out of=/dev/sdx bs=512
- */
-asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
-{
- int high_capacity;
-
- mmc_init_progress();
-
- mmc_update_progress(MMC_PROGRESS_ENTER);
- /* Initialise SDHI1 */
- /* PORT184CR: GPIO_FN_SDHICMD1 Control */
- __raw_writeb(CR_FUNCTION1, PORT184CR);
- /* PORT179CR: GPIO_FN_SDHICLK1 Control */
- __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
- /* PORT181CR: GPIO_FN_SDHID1_3 Control */
- __raw_writeb(CR_FUNCTION1, PORT183CR);
- /* PORT182CR: GPIO_FN_SDHID1_2 Control */
- __raw_writeb(CR_FUNCTION1, PORT182CR);
- /* PORT183CR: GPIO_FN_SDHID1_1 Control */
- __raw_writeb(CR_FUNCTION1, PORT181CR);
- /* PORT180CR: GPIO_FN_SDHID1_0 Control */
- __raw_writeb(CR_FUNCTION1, PORT180CR);
-
- /* Enable clock to SDHI1 hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
-
- /* setup SDHI hardware */
- mmc_update_progress(MMC_PROGRESS_INIT);
- high_capacity = sdhi_boot_init(SDHI_BASE);
- if (high_capacity < 0)
- goto err;
-
- mmc_update_progress(MMC_PROGRESS_LOAD);
- /* load kernel */
- if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
- 0, /* Kernel is at block 1 */
- (len + TMIO_BBS - 1) / TMIO_BBS, buf))
- goto err;
-
- /* Disable clock to SDHI1 hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
-
- mmc_update_progress(MMC_PROGRESS_DONE);
-
- return;
-err:
- for(;;);
-}
+++ /dev/null
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/sd.h>
-#include <linux/mmc/tmio.h>
-#include <mach/sdhi.h>
-
-#define OCR_FASTBOOT (1<<29)
-#define OCR_HCS (1<<30)
-#define OCR_BUSY (1<<31)
-
-#define RESP_CMD12 0x00000030
-
-static inline u16 sd_ctrl_read16(void __iomem *base, int addr)
-{
- return __raw_readw(base + addr);
-}
-
-static inline u32 sd_ctrl_read32(void __iomem *base, int addr)
-{
- return __raw_readw(base + addr) |
- __raw_readw(base + addr + 2) << 16;
-}
-
-static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val)
-{
- __raw_writew(val, base + addr);
-}
-
-static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val)
-{
- __raw_writew(val, base + addr);
- __raw_writew(val >> 16, base + addr + 2);
-}
-
-#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \
- TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \
- TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \
- TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \
- TMIO_STAT_ILL_FUNC)
-
-static int sdhi_intr(void __iomem *base)
-{
- unsigned long state = sd_ctrl_read32(base, CTL_STATUS);
-
- if (state & ALL_ERROR) {
- sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- ALL_ERROR |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return -EINVAL;
- }
- if (state & TMIO_STAT_CMDRESPEND) {
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- TMIO_STAT_CMDRESPEND |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return 0;
- }
- if (state & TMIO_STAT_RXRDY) {
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return 0;
- }
- if (state & TMIO_STAT_DATAEND) {
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND);
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- TMIO_STAT_DATAEND |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- return 0;
- }
-
- return -EAGAIN;
-}
-
-static int sdhi_boot_wait_resp_end(void __iomem *base)
-{
- int err = -EAGAIN, timeout = 10000000;
-
- while (timeout--) {
- err = sdhi_intr(base);
- if (err != -EAGAIN)
- break;
- udelay(1);
- }
-
- return err;
-}
-
-/* SDHI_CLK_CTRL */
-#define CLK_MMC_ENABLE (1 << 8)
-#define CLK_MMC_INIT (1 << 6) /* clk / 256 */
-
-static void sdhi_boot_mmc_clk_stop(void __iomem *base)
-{
- sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000);
- msleep(10);
- sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE &
- sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
- msleep(10);
-}
-
-static void sdhi_boot_mmc_clk_start(void __iomem *base)
-{
- sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE |
- sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
- msleep(10);
- sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE);
- msleep(10);
-}
-
-static void sdhi_boot_reset(void __iomem *base)
-{
- sd_ctrl_write16(base, CTL_RESET_SD, 0x0000);
- msleep(10);
- sd_ctrl_write16(base, CTL_RESET_SD, 0x0001);
- msleep(10);
-}
-
-/* Set MMC clock / power.
- * Note: This controller uses a simple divider scheme therefore it cannot
- * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
- * MMC wont run that fast, it has to be clocked at 12MHz which is the next
- * slowest setting.
- */
-static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios)
-{
- if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY)
- return -EBUSY;
-
- if (ios->clock)
- sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL,
- ios->clock | CLK_MMC_ENABLE);
-
- /* Power sequence - OFF -> ON -> UP */
- switch (ios->power_mode) {
- case MMC_POWER_OFF: /* power down SD bus */
- sdhi_boot_mmc_clk_stop(base);
- break;
- case MMC_POWER_ON: /* power up SD bus */
- break;
- case MMC_POWER_UP: /* start bus clock */
- sdhi_boot_mmc_clk_start(base);
- break;
- }
-
- switch (ios->bus_width) {
- case MMC_BUS_WIDTH_1:
- sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0);
- break;
- case MMC_BUS_WIDTH_4:
- sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0);
- break;
- }
-
- /* Let things settle. delay taken from winCE driver */
- udelay(140);
-
- return 0;
-}
-
-/* These are the bitmasks the tmio chip requires to implement the MMC response
- * types. Note that R1 and R6 are the same in this scheme. */
-#define RESP_NONE 0x0300
-#define RESP_R1 0x0400
-#define RESP_R1B 0x0500
-#define RESP_R2 0x0600
-#define RESP_R3 0x0700
-#define DATA_PRESENT 0x0800
-#define TRANSFER_READ 0x1000
-
-static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd)
-{
- int err, c = cmd->opcode;
-
- switch (mmc_resp_type(cmd)) {
- case MMC_RSP_NONE: c |= RESP_NONE; break;
- case MMC_RSP_R1: c |= RESP_R1; break;
- case MMC_RSP_R1B: c |= RESP_R1B; break;
- case MMC_RSP_R2: c |= RESP_R2; break;
- case MMC_RSP_R3: c |= RESP_R3; break;
- default:
- return -EINVAL;
- }
-
- /* No interrupts so this may not be cleared */
- sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
-
- sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND |
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg);
- sd_ctrl_write16(base, CTL_SD_CMD, c);
-
-
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) &
- sd_ctrl_read32(base, CTL_IRQ_MASK));
-
- err = sdhi_boot_wait_resp_end(base);
- if (err)
- return err;
-
- cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE);
-
- return 0;
-}
-
-static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity,
- unsigned long block, unsigned short *buf)
-{
- int err, i;
-
- /* CMD17 - Read */
- {
- struct mmc_command cmd;
-
- cmd.opcode = MMC_READ_SINGLE_BLOCK | \
- TRANSFER_READ | DATA_PRESENT;
- if (high_capacity)
- cmd.arg = block;
- else
- cmd.arg = block * TMIO_BBS;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- sd_ctrl_write32(base, CTL_IRQ_MASK,
- ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY |
- TMIO_STAT_TXUNDERRUN) &
- sd_ctrl_read32(base, CTL_IRQ_MASK));
- err = sdhi_boot_wait_resp_end(base);
- if (err)
- return err;
-
- sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS);
- for (i = 0; i < TMIO_BBS / sizeof(*buf); i++)
- *buf++ = sd_ctrl_read16(base, RESP_CMD12);
-
- err = sdhi_boot_wait_resp_end(base);
- if (err)
- return err;
-
- return 0;
-}
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
- unsigned long offset, unsigned short count,
- unsigned short *buf)
-{
- unsigned long i;
- int err = 0;
-
- for (i = 0; i < count; i++) {
- err = sdhi_boot_do_read_single(base, high_capacity, offset + i,
- buf + (i * TMIO_BBS /
- sizeof(*buf)));
- if (err)
- return err;
- }
-
- return 0;
-}
-
-#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34)
-
-int sdhi_boot_init(void __iomem *base)
-{
- bool sd_v2 = false, sd_v1_0 = false;
- unsigned short cid;
- int err, high_capacity = 0;
-
- sdhi_boot_mmc_clk_stop(base);
- sdhi_boot_reset(base);
-
- /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */
- {
- struct mmc_ios ios;
- ios.power_mode = MMC_POWER_ON;
- ios.bus_width = MMC_BUS_WIDTH_1;
- ios.clock = CLK_MMC_INIT;
- err = sdhi_boot_mmc_set_ios(base, &ios);
- if (err)
- return err;
- }
-
- /* CMD0 */
- {
- struct mmc_command cmd;
- msleep(1);
- cmd.opcode = MMC_GO_IDLE_STATE;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- msleep(2);
- }
-
- /* CMD8 - Test for SD version 2 */
- {
- struct mmc_command cmd;
- cmd.opcode = SD_SEND_IF_COND;
- cmd.arg = (VOLTAGES != 0) << 8 | 0xaa;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd); /* Ignore error */
- if ((cmd.resp[0] & 0xff) == 0xaa)
- sd_v2 = true;
- }
-
- /* CMD55 - Get OCR (SD) */
- {
- int timeout = 1000;
- struct mmc_command cmd;
-
- cmd.arg = 0;
-
- do {
- cmd.opcode = MMC_APP_CMD;
- cmd.flags = MMC_RSP_R1;
- cmd.arg = 0;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- break;
-
- cmd.opcode = SD_APP_OP_COND;
- cmd.flags = MMC_RSP_R3;
- cmd.arg = (VOLTAGES & 0xff8000);
- if (sd_v2)
- cmd.arg |= OCR_HCS;
- cmd.arg |= OCR_FASTBOOT;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- break;
-
- msleep(1);
- } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
- if (!err && timeout) {
- if (!sd_v2)
- sd_v1_0 = true;
- high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
- }
- }
-
- /* CMD1 - Get OCR (MMC) */
- if (!sd_v2 && !sd_v1_0) {
- int timeout = 1000;
- struct mmc_command cmd;
-
- do {
- cmd.opcode = MMC_SEND_OP_COND;
- cmd.arg = VOLTAGES | OCR_HCS;
- cmd.flags = MMC_RSP_R3;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
-
- msleep(1);
- } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
- if (!timeout)
- return -EAGAIN;
-
- high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
- }
-
- /* CMD2 - Get CID */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_ALL_SEND_CID;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R2;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- /* CMD3
- * MMC: Set the relative address
- * SD: Get the relative address
- * Also puts the card into the standby state
- */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SET_RELATIVE_ADDR;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- cid = cmd.resp[0] >> 16;
- }
-
- /* CMD9 - Get CSD */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SEND_CSD;
- cmd.arg = cid << 16;
- cmd.flags = MMC_RSP_R2;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- /* CMD7 - Select the card */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SELECT_CARD;
- //cmd.arg = rca << 16;
- cmd.arg = cid << 16;
- //cmd.flags = MMC_RSP_R1B;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- /* CMD16 - Set the block size */
- {
- struct mmc_command cmd;
- cmd.opcode = MMC_SET_BLOCKLEN;
- cmd.arg = TMIO_BBS;
- cmd.flags = MMC_RSP_R1;
- err = sdhi_boot_request(base, &cmd);
- if (err)
- return err;
- }
-
- return high_capacity;
-}
+++ /dev/null
-#ifndef SDHI_MOBILE_H
-#define SDHI_MOBILE_H
-
-#include <linux/compiler.h>
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
- unsigned long offset, unsigned short count,
- unsigned short *buf);
-int sdhi_boot_init(void __iomem *base);
-
-#endif
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
- r8a73a4-ape6evm.dtb \
- r8a73a4-ape6evm-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
r8a7779-marzen.dtb \
- sh7372-mackerel.dtb \
- sh73a0-kzm9g.dtb \
- sh73a0-kzm9g-reference.dtb
+ sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
+ r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
- r8a7794-alt.dtb
+ r8a7794-alt.dtb \
+ sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk.dtb \
+++ /dev/null
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "APE6EVM";
- compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
-
- aliases {
- serial0 = &scifa0;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw";
- stdout-path = &scifa0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory@200000000 {
- device_type = "memory";
- reg = <2 0x00000000 0 0x40000000>;
- };
-
- vcc_mmc0: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "MMC0 Vcc";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator@1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- /* Common 3.3V rail, used by several devices on APE6EVM */
- ape6evm_fixed_3v3: regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- lbsc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
- };
-};
-
-&i2c5 {
- status = "okay";
- vdd_dvfs: max8973@1b {
- compatible = "maxim,max8973";
- reg = <0x1b>;
-
- regulator-min-microvolt = <935000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_dvfs>;
- operating-points = <
- /* kHz uV */
- 1950000 1115000
- 1462500 995000
- >;
- voltage-tolerance = <1>; /* 1% */
-};
-
-&cmt1 {
- status = "okay";
-};
-
-&pfc {
- scifa0_pins: serial0 {
- renesas,groups = "scifa0_data";
- renesas,function = "scifa0";
- };
-
- mmc0_pins: mmc {
- renesas,groups = "mmc0_data8", "mmc0_ctrl";
- renesas,function = "mmc0";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
- renesas,function = "sdhi0";
- };
-
- sdhi1_pins: sd1 {
- renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
- renesas,function = "sdhi1";
- };
-};
-
-&mmcif0 {
- vmmc-supply = <&vcc_mmc0>;
- bus-width = <8>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "okay";
-};
-
-&scifa0 {
- pinctrl-0 = <&scifa0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- vmmc-supply = <&vcc_sdhi0>;
- bus-width = <4>;
- toshiba,mmc-wrprotect-disable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhi0_pins>;
- status = "okay";
-};
-
-&sdhi1 {
- vmmc-supply = <&ape6evm_fixed_3v3>;
- bus-width = <4>;
- broken-cd;
- toshiba,mmc-wrprotect-disable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhi1_pins>;
- status = "okay";
-};
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
stdout-path = &scifa0;
};
regulator-always-on;
};
- lbsc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
-
- ethernet@8000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x08000000 0x1000>;
- interrupt-parent = <&irqc1>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&ape6evm_fixed_3v3>;
- vddvario-supply = <&ape6evm_fixed_1v8>;
- };
- };
-
leds {
compatible = "gpio-leds";
led1 {
voltage-tolerance = <1>; /* 1% */
};
+&bsc {
+ ethernet@8000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x08000000 0x1000>;
+ interrupt-parent = <&irqc1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&ape6evm_fixed_3v3>;
+ vddvario-supply = <&ape6evm_fixed_1v8>;
+ };
+};
+
&cmt1 {
status = "okay";
};
* kind, whether express or implied.
*/
+#include <dt-bindings/clock/r8a73a4-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
+ power-domains = <&pd_a2sl>;
};
};
+ ptm {
+ compatible = "arm,coresight-etm3x";
+ power-domains = <&pd_d4>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
dbsc1: memory-controller@e6790000 {
compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe6790000 0 0x10000>;
+ power-domains = <&pd_a3bc>;
};
dbsc2: memory-controller@e67a0000 {
compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe67a0000 0 0x10000>;
+ power-domains = <&pd_a3bc>;
};
dmac: dma-multiplexer {
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14", "ch15",
"ch16", "ch17", "ch18", "ch19";
+ clocks = <&mstp2_clks R8A73A4_CLK_DMAC>;
+ power-domains = <&pd_a3sp>;
};
};
- pfc: pfc@e6050000 {
- compatible = "renesas,pfc-r8a73a4";
- reg = <0 0xe6050000 0 0x9000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts-extended =
- <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
- <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
- <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
- <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
- <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
- <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
- <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
- <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
- <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
- <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
- <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
- <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
- <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
- <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
- <&irqc1 24 0>, <&irqc1 25 0>;
- };
-
i2c5: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
+ clock-names = "fck";
+ power-domains = <&pd_c5>;
renesas,channels-mask = <0xff>;
<0 29 IRQ_TYPE_LEVEL_HIGH>,
<0 30 IRQ_TYPE_LEVEL_HIGH>,
<0 31 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_c4>;
};
irqc1: interrupt-controller@e61c0200 {
<0 55 IRQ_TYPE_LEVEL_HIGH>,
<0 56 IRQ_TYPE_LEVEL_HIGH>,
<0 57 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_c4>;
+ };
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a73a4";
+ reg = <0 0xe6050000 0 0x9000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts-extended =
+ <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
+ <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
+ <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+ <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+ <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+ <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+ <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+ <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+ <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
+ <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
+ <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+ <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+ <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+ <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+ <&irqc1 24 0>, <&irqc1 25 0>;
+ power-domains = <&pd_c5>;
};
thermal@e61f0000 {
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+ power-domains = <&pd_c5>;
};
i2c0: i2c@e6500000 {
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6c20000 0 0x100>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
+ clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6c30000 0 0x100>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
+ clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c40000 0 0x100>;
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
+ clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c50000 0 0x100>;
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
+ clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
+ clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6cf0000 0 0x100>;
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
+ clock-names = "sci_ick";
+ power-domains = <&pd_c4>;
status = "disabled";
};
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
status = "disabled";
};
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
status = "disabled";
};
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
status = "disabled";
};
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
+ power-domains = <&pd_a3sp>;
reg-io-width = <4>;
status = "disabled";
};
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
+ power-domains = <&pd_a3sp>;
reg-io-width = <4>;
status = "disabled";
};
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+
+ bsc: bus@fec10000 {
+ compatible = "renesas,bsc-r8a73a4", "renesas,bsc",
+ "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
+ reg = <0 0xfec10000 0 0x400>;
+ clocks = <&zb_clk>;
+ power-domains = <&pd_c4>;
+ };
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* External root clocks */
+ extalr_clk: extalr_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "extalr";
+ };
+ extal1_clk: extal1_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "extal1";
+ };
+ extal2_clk: extal2_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "extal2";
+ };
+ fsiack_clk: fsiack_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "fsiack";
+ };
+ fsibck_clk: fsibck_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "fsibck";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a73a4-cpg-clocks";
+ reg = <0 0xe6150000 0 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll2",
+ "pll2s", "pll2h", "z", "z2",
+ "i", "m3", "b", "m1", "m2",
+ "zx", "zs", "hp";
+ };
+
+ /* Variable factor clocks (DIV6) */
+ zb_clk: zb_clk@e6150010 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150010 0 4>;
+ clocks = <&pll1_div2_clk>, <0>,
+ <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "zb";
+ };
+ sdhi0_clk: sdhi0_clk@e6150074 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150074 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi0ck";
+ };
+ sdhi1_clk: sdhi1_clk@e6150078 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150078 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi1ck";
+ };
+ sdhi2_clk: sdhi2_clk@e615007c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615007c 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi2ck";
+ };
+ mmc0_clk: mmc0_clk@e6150240 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150240 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc0";
+ };
+ mmc1_clk: mmc1_clk@e6150244 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150244 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc1";
+ };
+ vclk1_clk: vclk1_clk@e6150008 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150008 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk1";
+ };
+ vclk2_clk: vclk2_clk@e615000c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615000c 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk2";
+ };
+ vclk3_clk: vclk3_clk@e615001c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615001c 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk3";
+ };
+ vclk4_clk: vclk4_clk@e6150014 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150014 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk4";
+ };
+ vclk5_clk: vclk5_clk@e6150034 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150034 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk5";
+ };
+ fsia_clk: fsia_clk@e6150018 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150018 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&fsiack_clk>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "fsia";
+ };
+ fsib_clk: fsib_clk@e6150090 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150090 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&fsibck_clk>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "fsib";
+ };
+ mp_clk: mp_clk@e6150080 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150080 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&extal2_clk>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mp";
+ };
+ m4_clk: m4_clk@e6150098 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150098 0 4>;
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>;
+ #clock-cells = <0>;
+ clock-output-names = "m4";
+ };
+ hsi_clk: hsi_clk@e615026c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615026c 0 4>;
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>,
+ <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "hsi";
+ };
+ spuv_clk: spuv_clk@e6150094 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150094 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&extal2_clk>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "spuv";
+ };
+
+ /* Fixed factor clocks */
+ main_div2_clk: main_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A73A4_CLK_MAIN>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "main_div2";
+ };
+ pll0_div2_clk: pll0_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll0_div2";
+ };
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ extal1_div2_clk: extal1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal1_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "extal1_div2";
+ };
+
+ /* Gate clocks */
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+ R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+ R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+ R8A73A4_CLK_DMAC
+ >;
+ clock-output-names =
+ "scifa0", "scifa1", "scifb0", "scifb1",
+ "scifb2", "scifb3", "dmac";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&cpg_clocks R8A73A4_CLK_HP>, <&mmc1_clk>,
+ <&sdhi2_clk>, <&sdhi1_clk>, <&sdhi0_clk>,
+ <&mmc0_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+ <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks
+ R8A73A4_CLK_HP>, <&cpg_clocks
+ R8A73A4_CLK_HP>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_IIC2 R8A73A4_CLK_MMCIF1
+ R8A73A4_CLK_SDHI2 R8A73A4_CLK_SDHI1
+ R8A73A4_CLK_SDHI0 R8A73A4_CLK_MMCIF0
+ R8A73A4_CLK_IIC6 R8A73A4_CLK_IIC7
+ R8A73A4_CLK_IIC0 R8A73A4_CLK_IIC1
+ R8A73A4_CLK_CMT1
+ >;
+ clock-output-names =
+ "iic2", "mmcif1", "sdhi2", "sdhi1", "sdhi0",
+ "mmcif0", "iic6", "iic7", "iic0", "iic1",
+ "cmt1";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+ <&cpg_clocks R8A73A4_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
+ R8A73A4_CLK_IIC3
+ >;
+ clock-output-names =
+ "iic5", "iic4", "iic3";
+ };
+ mstp5_clks: mstp5_clks@e6150144 {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+ clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
+ >;
+ clock-output-names =
+ "thermal", "iic8";
+ };
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
+ reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
+
+ pm-domains {
+ pd_c5: c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_c4: c4@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3sg: a3sg@16 {
+ reg = <16>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3ex: a3ex@17 {
+ reg = <17>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sp: a3sp@18 {
+ reg = <18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2us: a2us@19 {
+ reg = <19>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a3sm: a3sm@20 {
+ reg = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2sl: a2sl@21 {
+ reg = <21>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a3km: a3km@22 {
+ reg = <22>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2kl: a2kl@23 {
+ reg = <23>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ pd_c4ma: c4ma@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_c4cl: c4cl@2 {
+ reg = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_d4: d4@3 {
+ reg = <3>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4bc: a4bc@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3bc: a3bc@5 {
+ reg = <5>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4l: a4l@6 {
+ reg = <6>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4lc: a4lc@7 {
+ reg = <7>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4mp: a4mp@8 {
+ reg = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3mp: a3mp@9 {
+ reg = <9>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3vc: a3vc@10 {
+ reg = <10>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4sf: a4sf@11 {
+ reg = <11>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3r: a3r@12 {
+ reg = <12>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2rv: a2rv@13 {
+ reg = <13>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a2is: a2is@14 {
+ reg = <14>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
};
/dts-v1/;
#include "r8a7778.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "bockw";
compatible = "renesas,bockw", "renesas,r8a7778";
+ aliases {
+ serial0 = &scif0;
+ };
+
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
+ stdout-path = &scif0;
};
memory {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
+
+ fixedregulator3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4643>;
+ system-clock-frequency = <11289600>;
+ };
+ };
+};
+
+&bsc {
+ ethernet@18300000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x18300000 0x1000>;
+
+ phy-mode = "mii";
+ interrupt-parent = <&irqpin>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ reg-io-width = <4>;
+ vddvario-supply = <&fixedregulator3v3>;
+ vdd33a-supply = <&fixedregulator3v3>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <33333333>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ ak4643: sound-codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ camera@41 {
+ compatible = "oki,ml86v7667";
+ reg = <0x41>;
+ };
+
+ camera@43 {
+ compatible = "oki,ml86v7667";
+ reg = <0x43>;
+ };
+
+ rx8581: rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x51>;
+ };
+};
+
+&mmcif {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <8>;
+ broken-cd;
+ status = "okay";
+};
+
+&irqpin {
+ status = "okay";
+};
+
+&tmu0 {
+ status = "okay";
+};
+
+&pfc {
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_a", "scif0_ctrl";
+ renesas,function = "scif0";
+ };
+
+ mmc_pins: mmc {
+ renesas,groups = "mmc_data8", "mmc_ctrl";
+ renesas,function = "mmc";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
+ "sdhi0_cd";
+ renesas,function = "sdhi0";
+ };
+
+ hspi0_pins: hspi0 {
+ renesas,groups = "hspi0_a";
+ renesas,function = "hspi0";
+ };
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
+
+ vin1_pins: vin1 {
+ renesas,groups = "vin1_data8", "vin1_clk";
+ renesas,function = "vin1";
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <4>;
+ status = "okay";
+ wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+};
+
+&hspi0 {
+ pinctrl-0 = <&hspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl008k";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "data(spi)";
+ reg = <0x00000000 0x00100000>;
+ };
+ };
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/r8a7778-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
spi2 = &hspi2;
};
+ bsc: bus@1c000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1c000000>;
+ };
+
+ ether: ethernet@fde00000 {
+ compatible = "renesas,ether-r8a7778";
+ reg = <0xfde00000 0x400>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@fe438000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc70000 0x1000>;
interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
status = "disabled";
};
compatible = "renesas,i2c-r8a7778";
reg = <0xffc71000 0x1000>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
status = "disabled";
};
compatible = "renesas,i2c-r8a7778";
reg = <0xffc72000 0x1000>;
interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
status = "disabled";
};
compatible = "renesas,i2c-r8a7778";
reg = <0xffc73000 0x1000>;
interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
status = "disabled";
};
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
<0 33 IRQ_TYPE_LEVEL_HIGH>,
<0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
+ clock-names = "fck";
#renesas,channels = <3>;
interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
<0 37 IRQ_TYPE_LEVEL_HIGH>,
<0 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
+ clock-names = "fck";
#renesas,channels = <3>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
<0 41 IRQ_TYPE_LEVEL_HIGH>,
<0 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
+ clock-names = "fck";
#renesas,channels = <3>;
status = "disabled";
};
+ rcar_sound: sound@ffd90000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
+ reg = <0xffd90000 0x1000>, /* SRU */
+ <0xffd91000 0x1240>, /* SSI */
+ <0xfffe0000 0x24>; /* ADG */
+ clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
+ <&mstp3_clks R8A7778_CLK_SSI7>,
+ <&mstp3_clks R8A7778_CLK_SSI6>,
+ <&mstp3_clks R8A7778_CLK_SSI5>,
+ <&mstp3_clks R8A7778_CLK_SSI4>,
+ <&mstp0_clks R8A7778_CLK_SSI3>,
+ <&mstp0_clks R8A7778_CLK_SSI2>,
+ <&mstp0_clks R8A7778_CLK_SSI1>,
+ <&mstp0_clks R8A7778_CLK_SSI0>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC8>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC7>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC6>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC5>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC4>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC3>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC2>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC1>,
+ <&mstp5_clks R8A7778_CLK_SRU_SRC0>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+ <&cpg_clocks R8A7778_CLK_S1>;
+ clock-names = "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4",
+ "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+ "src.8", "src.7", "src.6", "src.5", "src.4",
+ "src.3", "src.2", "src.1", "src.0",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+
+ status = "disabled";
+
+ rcar_sound,src {
+ src3: src@3 { };
+ src4: src@4 { };
+ src5: src@5 { };
+ src6: src@6 { };
+ src7: src@7 { };
+ src8: src@8 { };
+ src9: src@9 { };
+ };
+
+ rcar_sound,ssi {
+ ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ };
+ };
+
scif0: serial@ffe40000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,sh-mmcif";
reg = <0xffe4e000 0x100>;
interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7778_CLK_MMC>;
status = "disabled";
};
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4c000 0x100>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
status = "disabled";
};
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4d000 0x100>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
status = "disabled";
};
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4f000 0x100>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
status = "disabled";
};
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc7000 0x18>;
interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc8000 0x18>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc6000 0x18>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* External input clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@ffc80000 {
+ compatible = "renesas,r8a7778-cpg-clocks";
+ reg = <0xffc80000 0x80>;
+ #clock-cells = <1>;
+ clocks = <&extal_clk>;
+ clock-output-names = "plla", "pllb", "b",
+ "out", "p", "s", "s1";
+ };
+
+ /* Audio clocks; frequencies are set by boards if applicable. */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "audio_clk_a";
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "audio_clk_b";
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "audio_clk_c";
+ };
+
+ /* Fixed ratio clocks */
+ g_clk: g_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "g";
+ };
+ i_clk: i_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "i";
+ };
+ s3_clk: s3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "s3";
+ };
+ s4_clk: s4_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "s4";
+ };
+ z_clk: z_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7778_CLK_PLLB>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "z";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: mstp0_clks@ffc80030 {
+ compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xffc80030 4>;
+ clocks = <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_S>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7778_CLK_I2C0 R8A7778_CLK_I2C1
+ R8A7778_CLK_I2C2 R8A7778_CLK_I2C3
+ R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1
+ R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3
+ R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5
+ R8A7778_CLK_TMU0 R8A7778_CLK_TMU1
+ R8A7778_CLK_TMU2 R8A7778_CLK_SSI0
+ R8A7778_CLK_SSI1 R8A7778_CLK_SSI2
+ R8A7778_CLK_SSI3 R8A7778_CLK_SRU
+ R8A7778_CLK_HSPI
+ >;
+ clock-output-names =
+ "i2c0", "i2c1", "i2c2", "i2c3", "scif0",
+ "scif1", "scif2", "scif3", "scif4", "scif5",
+ "tmu0", "tmu1", "tmu2", "ssi0", "ssi1",
+ "ssi2", "ssi3", "sru", "hspi";
+ };
+ mstp1_clks: mstp1_clks@ffc80034 {
+ compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xffc80034 4>, <0xffc80044 4>;
+ clocks = <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_S>,
+ <&cpg_clocks R8A7778_CLK_S>,
+ <&cpg_clocks R8A7778_CLK_P>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7778_CLK_ETHER R8A7778_CLK_VIN0
+ R8A7778_CLK_VIN1 R8A7778_CLK_USB
+ >;
+ clock-output-names =
+ "ether", "vin0", "vin1", "usb";
+ };
+ mstp3_clks: mstp3_clks@ffc8003c {
+ compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xffc8003c 4>;
+ clocks = <&s4_clk>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7778_CLK_MMC R8A7778_CLK_SDHI0
+ R8A7778_CLK_SDHI1 R8A7778_CLK_SDHI2
+ R8A7778_CLK_SSI4 R8A7778_CLK_SSI5
+ R8A7778_CLK_SSI6 R8A7778_CLK_SSI7
+ R8A7778_CLK_SSI8
+ >;
+ clock-output-names =
+ "mmc", "sdhi0", "sdhi1", "sdhi2", "ssi4",
+ "ssi5", "ssi6", "ssi7", "ssi8";
+ };
+ mstp5_clks: mstp5_clks@ffc80054 {
+ compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xffc80054 4>;
+ clocks = <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>,
+ <&cpg_clocks R8A7778_CLK_P>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7778_CLK_SRU_SRC0 R8A7778_CLK_SRU_SRC1
+ R8A7778_CLK_SRU_SRC2 R8A7778_CLK_SRU_SRC3
+ R8A7778_CLK_SRU_SRC4 R8A7778_CLK_SRU_SRC5
+ R8A7778_CLK_SRU_SRC6 R8A7778_CLK_SRU_SRC7
+ R8A7778_CLK_SRU_SRC8
+ >;
+ clock-output-names =
+ "sru-src0", "sru-src1", "sru-src2",
+ "sru-src3", "sru-src4", "sru-src5",
+ "sru-src6", "sru-src7", "sru-src8";
+ };
+ };
};
+++ /dev/null
-/*
- * Device Tree Source for the mackerel board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh7372.dtsi"
-
-/ {
- model = "Mackerel (AP4 EVM 2nd)";
- compatible = "renesas,mackerel";
-
- chosen {
- bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw";
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x10000000>;
- };
-};
+++ /dev/null
-/*
- * Device Tree Source for the sh7372 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
- compatible = "renesas,sh7372";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "arm,cortex-a8";
- device_type = "cpu";
- reg = <0x0>;
- clock-frequency = <800000000>;
- };
- };
-
- pfc: pfc@e6050000 {
- compatible = "renesas,pfc-sh7372";
- reg = <0xe6050000 0x8000>,
- <0xe605801c 0x1c>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
+++ /dev/null
-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on sh73a0-kzm9g.dts
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "KZM-A9-GT";
- compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
-
- aliases {
- serial4 = &scifa4;
- };
-
- cpus {
- cpu@0 {
- cpu0-supply = <&vdd_dvfs>;
- operating-points = <
- /* kHz uV */
- 1196000 1315000
- 598000 1175000
- 398667 1065000
- >;
- voltage-tolerance = <1>; /* 1% */
- };
- };
-
- chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
- stdout-path = &scifa4;
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x20000000>;
- };
-
- reg_1p8v: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- reg_3p3v: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vmmc_sdhi0: regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vmmc_sdhi2: regulator@3 {
- compatible = "regulator-fixed";
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- lan9220@10000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x10000000 0x100>;
- phy-mode = "mii";
- interrupt-parent = <&irqpin0>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- reg-io-width = <4>;
- smsc,irq-push-pull;
- smsc,save-mac-address;
- vddvario-supply = <®_1p8v>;
- vdd33a-supply = <®_3p3v>;
- };
-
- leds {
- compatible = "gpio-leds";
- led1 {
- gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
- label = "LED1";
- };
- led2 {
- gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
- label = "LED2";
- };
- led3 {
- gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
- label = "LED3";
- };
- led4 {
- gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
- label = "LED4";
- };
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- back-key {
- gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_BACK>;
- label = "SW3";
- };
-
- right-key {
- gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RIGHT>;
- label = "SW2-R";
- };
-
- left-key {
- gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LEFT>;
- label = "SW2-L";
- };
-
- enter-key {
- gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_ENTER>;
- label = "SW2-P";
- };
-
- up-key {
- gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_UP>;
- label = "SW2-U";
- };
-
- down-key {
- gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_DOWN>;
- label = "SW2-D";
- };
-
- home-key {
- gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_HOME>;
- label = "SW1";
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "left_j";
- simple-audio-card,cpu {
- sound-dai = <&sh_fsi2 0>;
- };
- simple-audio-card,codec {
- sound-dai = <&ak4648>;
- bitclock-master;
- frame-master;
- system-clock-frequency = <11289600>;
- };
- };
-};
-
-&cmt1 {
- status = "okay";
-};
-
-&extal2_clk {
- clock-frequency = <48000000>;
-};
-
-&i2c0 {
- status = "okay";
-
- compass@c {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0c>;
- interrupt-parent = <&irqpin3>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- };
-
- ak4648: codec@12 {
- compatible = "asahi-kasei,ak4648";
- reg = <0x12>;
- #sound-dai-cells = <0>;
- };
-
- accelerometer@1d {
- compatible = "adi,adxl34x";
- reg = <0x1d>;
- interrupt-parent = <&irqpin3>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
- <3 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- rtc@32 {
- compatible = "ricoh,r2025sd";
- reg = <0x32>;
- };
-
- as3711@40 {
- compatible = "ams,as3711";
- reg = <0x40>;
-
- regulators {
- vdd_dvfs: sd1 {
- regulator-name = "1.315V CPU";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
- sd2 {
- regulator-name = "1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- sd4 {
- regulator-name = "1.215V";
- regulator-min-microvolt = <1215000>;
- regulator-max-microvolt = <1235000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo2 {
- regulator-name = "2.8V CPU";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo3 {
- regulator-name = "3.0V CPU";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo4 {
- regulator-name = "2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo5 {
- regulator-name = "2.8V #2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo7 {
- regulator-name = "1.15V CPU";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- regulator-always-on;
- regulator-boot-on;
- };
- ldo8 {
- regulator-name = "1.15V CPU #2";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-
- touchscreen@55 {
- compatible = "sitronix,st1232";
- reg = <0x55>;
- interrupt-parent = <&irqpin1>;
- interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
-&i2c3 {
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- pcf8575: gpio@20 {
- compatible = "nxp,pcf8575";
- reg = <0x20>;
- interrupt-parent = <&irqpin2>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-};
-
-&mmcif {
- pinctrl-0 = <&mmcif_pins>;
- pinctrl-names = "default";
-
- bus-width = <8>;
- vmmc-supply = <®_1p8v>;
- status = "okay";
-};
-
-&pfc {
- i2c3_pins: i2c3 {
- renesas,groups = "i2c3_1";
- renesas,function = "i2c3";
- };
-
- mmcif_pins: mmc {
- mux {
- renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
- renesas,function = "mmc0";
- };
- cfg {
- renesas,groups = "mmc0_data8_0";
- renesas,pins = "PORT279";
- bias-pull-up;
- };
- };
-
- scifa4_pins: serial4 {
- renesas,groups = "scifa4_data", "scifa4_ctrl";
- renesas,function = "scifa4";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
- renesas,function = "sdhi0";
- };
-
- sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
- };
-
- fsia_pins: sounda {
- renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
- "fsia_data_in", "fsia_data_out";
- renesas,function = "fsia";
- };
-};
-
-&scifa4 {
- pinctrl-0 = <&scifa4_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vmmc_sdhi0>;
- bus-width = <4>;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vmmc_sdhi2>;
- bus-width = <4>;
- broken-cd;
- status = "okay";
-};
-
-&sh_fsi2 {
- pinctrl-0 = <&fsia_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
/*
* Device Tree Source for the KZM-A9-GT board
*
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
/dts-v1/;
#include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g", "renesas,sh73a0";
+ aliases {
+ serial4 = &scifa4;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1196000 1315000
+ 598000 1175000
+ 398667 1065000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+ };
+ };
+
chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+ bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ stdout-path = &scifa4;
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmc_sdhi0: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vmmc_sdhi2: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ label = "LED1";
+ };
+ led2 {
+ gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ label = "LED2";
+ };
+ led3 {
+ gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ label = "LED3";
+ };
+ led4 {
+ gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ label = "LED4";
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ back-key {
+ gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "SW3";
+ };
+
+ right-key {
+ gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RIGHT>;
+ label = "SW2-R";
+ };
+
+ left-key {
+ gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFT>;
+ label = "SW2-L";
+ };
+
+ enter-key {
+ gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ label = "SW2-P";
+ };
+
+ up-key {
+ gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ label = "SW2-U";
+ };
+
+ down-key {
+ gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ label = "SW2-D";
+ };
+
+ home-key {
+ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "SW1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&ak4648>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <11289600>;
+ };
+ };
+};
+
+&bsc {
+ ethernet@10000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x10000000 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&irqpin0>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ smsc,save-mac-address;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
+};
+
+&cmt1 {
+ status = "okay";
+};
+
+&extal2_clk {
+ clock-frequency = <48000000>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ compass@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ ak4648: codec@12 {
+ compatible = "asahi-kasei,ak4648";
+ reg = <0x12>;
+ #sound-dai-cells = <0>;
+ };
+
+ accelerometer@1d {
+ compatible = "adi,adxl34x";
+ reg = <0x1d>;
+ interrupt-parent = <&irqpin3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rtc@32 {
+ compatible = "ricoh,r2025sd";
+ reg = <0x32>;
+ };
+
+ as3711@40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ vdd_dvfs: sd1 {
+ regulator-name = "1.315V CPU";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd2 {
+ regulator-name = "1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo3 {
+ regulator-name = "3.0V CPU";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo4 {
+ regulator-name = "2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo5 {
+ regulator-name = "2.8V #2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo7 {
+ regulator-name = "1.15V CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo8 {
+ regulator-name = "1.15V CPU #2";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ touchscreen@55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupt-parent = <&irqpin1>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcf8575: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ interrupt-parent = <&irqpin2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ vmmc-supply = <®_1p8v>;
+ status = "okay";
+};
+
+&pfc {
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmc {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: serial4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+ "fsia_data_in", "fsia_data_out";
+ renesas,function = "fsia";
+ };
+};
+
+&scifa4 {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi0>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi2>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/sh73a0-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "arm,cortex-a9";
reg = <0>;
clock-frequency = <1196000000>;
+ power-domains = <&pd_a2sl>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
clock-frequency = <1196000000>;
+ power-domains = <&pd_a2sl>;
};
};
+ timer@f0000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xf0000600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&twd_clk>;
+ };
+
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
<0 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sec", "temp";
+ power-domains = <&pd_a4bc1>;
};
sbsc1: memory-controller@fe400000 {
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
<0 36 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sec", "temp";
+ power-domains = <&pd_a4bc0>;
};
pmu {
compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
reg = <0xe6138000 0x200>;
interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
+ clock-names = "fck";
+ power-domains = <&pd_c5>;
renesas,channels-mask = <0x3f>;
- clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
- clock-names = "fck";
status = "disabled";
};
0 7 IRQ_TYPE_LEVEL_HIGH
0 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+ power-domains = <&pd_a4s>;
control-parent;
};
0 15 IRQ_TYPE_LEVEL_HIGH
0 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+ power-domains = <&pd_a4s>;
control-parent;
};
0 23 IRQ_TYPE_LEVEL_HIGH
0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+ power-domains = <&pd_a4s>;
control-parent;
};
0 31 IRQ_TYPE_LEVEL_HIGH
0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+ power-domains = <&pd_a4s>;
control-parent;
};
0 169 IRQ_TYPE_LEVEL_HIGH
0 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
0 53 IRQ_TYPE_LEVEL_HIGH
0 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
0 173 IRQ_TYPE_LEVEL_HIGH
0 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
0 185 IRQ_TYPE_LEVEL_HIGH
0 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
0 189 IRQ_TYPE_LEVEL_HIGH
0 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
+ power-domains = <&pd_c5>;
status = "disabled";
};
interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
0 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
+ power-domains = <&pd_a3sp>;
reg-io-width = <4>;
status = "disabled";
};
0 84 IRQ_TYPE_LEVEL_HIGH
0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
status = "disabled";
};
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
+ power-domains = <&pd_a3sp>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
+ power-domains = <&pd_a3sp>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+ power-domains = <&pd_c5>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,sysc-sh73a0", "renesas,sysc-rmobile";
+ reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+ pm-domains {
+ pd_c5: c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_c4: c4@0 {
+ reg = <0>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_d4: d4@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4bc0: a4bc0@4 {
+ reg = <4>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4bc1: a4bc1@5 {
+ reg = <5>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4lc0: a4lc0@6 {
+ reg = <6>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4lc1: a4lc1@7 {
+ reg = <7>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4mp: a4mp@8 {
+ reg = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3mp: a3mp@9 {
+ reg = <9>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3vc: a3vc@10 {
+ reg = <10>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4rm: a4rm@12 {
+ reg = <12>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3r: a3r@13 {
+ reg = <13>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2rv: a2rv@14 {
+ reg = <14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ pd_a4s: a4s@16 {
+ reg = <16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3sp: a3sp@17 {
+ reg = <17>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sg: a3sg@18 {
+ reg = <18>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sm: a3sm@19 {
+ reg = <19>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2sl: a2sl@20 {
+ reg = <20>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
};
sh_fsi2: sound@ec230000 {
compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
interrupts = <0 146 0x4>;
+ power-domains = <&pd_a4mp>;
status = "disabled";
};
+ bsc: bus@fec10000 {
+ compatible = "renesas,bsc-sh73a0", "renesas,bsc",
+ "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x20000000>;
+ reg = <0xfec10000 0x400>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&zb_clk>;
+ power-domains = <&pd_a4s>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_MACH_APE6EVM=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_SMP=y
-CONFIG_SCHED_MC=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_NR_CPUS=8
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-# CONFIG_HW_PERF_EVENTS is not set
-# CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_NETFILTER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER_USER_HELPER is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=12
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SH_PFC=y
-CONFIG_GPIOLIB=y
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_RCAR_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_MAX8973=y
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_ENABLE_DEFAULT_TRACERS=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAM_V4_V5=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9=y
-CONFIG_AT91_TIMER_HZ=128
CONFIG_AEABI=y
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_ZBOOT_ROM_TEXT=0x0
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_SH7372=y
-CONFIG_MACH_MACKEREL=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=15
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_REGULATOR=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC_SH4_FSI=y
-CONFIG_USB=y
-CONFIG_USB_RENESAS_USBHS_HCD=y
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-if ARCH_AT91
-
-config HAVE_AT91_UTMI
- bool
-
-config HAVE_AT91_USB_CLK
- bool
-
-config COMMON_CLK_AT91
- bool
- select COMMON_CLK
-
-config HAVE_AT91_SMD
- bool
-
-config HAVE_AT91_H32MX
- bool
-
-config SOC_SAMA5
- bool
- select ATMEL_AIC5_IRQ
+menuconfig ARCH_AT91
+ bool "Atmel SoCs"
+ depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK_AT91
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select MEMORY
- select ATMEL_SDRAMC
- select SRAM if PM
-
-menu "Atmel AT91 System-on-Chip"
-
-choice
-
- prompt "Core type"
-
-config SOC_SAM_V4_V5
- bool "ARM9 AT91SAM9/AT91RM9200"
- help
- Select this if you are using one of Atmel's AT91SAM9 or
- AT91RM9200 SoC.
-
-config SOC_SAM_V7
- bool "Cortex A5"
- help
- Select this if you are using one of Atmel's SAMA5D3 SoC.
+ select PINCTRL
+ select PINCTRL_AT91
+ select SOC_BUS
-endchoice
-
-comment "Atmel AT91 Processor"
-
-if SOC_SAM_V7
+if ARCH_AT91
config SOC_SAMA5D3
- bool "SAMA5D3 family"
+ bool "SAMA5D3 family" if ARCH_MULTI_V7
select SOC_SAMA5
select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
config SOC_SAMA5D4
- bool "SAMA5D4 family"
+ bool "SAMA5D4 family" if ARCH_MULTI_V7
select SOC_SAMA5
- select CLKSRC_MMIO
select CACHE_L2X0
select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
select HAVE_AT91_H32MX
help
Select this if you are using one of Atmel's SAMA5D4 family SoC.
-endif
-if SOC_SAM_V4_V5
config SOC_AT91RM9200
- bool "AT91RM9200"
+ bool "AT91RM9200" if ARCH_MULTI_V4T
select ATMEL_AIC_IRQ
select ATMEL_ST
- select COMMON_CLK_AT91
select CPU_ARM920T
- select GENERIC_CLOCKEVENTS
select HAVE_AT91_USB_CLK
select MIGHT_HAVE_PCI
+ select SOC_SAM_V4_V5
select SRAM if PM
+ help
+ Select this if you are using Atmel's AT91RM9200 SoC.
config SOC_AT91SAM9
- bool "AT91SAM9"
+ bool "AT91SAM9" if ARCH_MULTI_V5
select ATMEL_AIC_IRQ
select ATMEL_SDRAMC
- select COMMON_CLK_AT91
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
select HAVE_AT91_UTMI
select HAVE_FB_ATMEL
select MEMORY
+ select SOC_SAM_V4_V5
select SRAM if PM
help
Select this if you are using one of those Atmel SoC:
AT91SAM9X25
AT91SAM9X35
AT91SAM9XE
-endif # SOC_SAM_V4_V5
-comment "AT91 Feature Selections"
+config HAVE_AT91_UTMI
+ bool
+
+config HAVE_AT91_USB_CLK
+ bool
+
+config COMMON_CLK_AT91
+ bool
+ select COMMON_CLK
+
+config HAVE_AT91_SMD
+ bool
+
+config HAVE_AT91_H32MX
+ bool
-config AT91_TIMER_HZ
- int "Kernel HZ (jiffies per second)"
- range 32 1024
- depends on ARCH_AT91
- default "128" if SOC_AT91RM9200
- default "100"
- help
- On AT91rm9200 chips where you're using a system clock derived
- from the 32768 Hz hardware clock, this tick rate should divide
- it exactly: use a power-of-two value, such as 128 or 256, to
- reduce timing errors caused by rounding.
+config SOC_SAM_V4_V5
+ bool
- On AT91sam926x chips, or otherwise when using a higher precision
- system clock (of at least several MHz), rounding is less of a
- problem so it can be safer to use a decimal values like 100.
+config SOC_SAM_V7
+ bool
-endmenu
+config SOC_SAMA5
+ bool
+ select ATMEL_AIC5_IRQ
+ select ATMEL_SDRAMC
+ select MEMORY
+ select SOC_SAM_V7
+ select SRAM if PM
endif
#
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
obj-y := soc.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm_suspend.o
+ifeq ($(CONFIG_CPU_V7),y)
+AFLAGS_pm_suspend.o := -march=armv7-a
+endif
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#define AT91_DBGU_CR (0x00) /* Control Register */
-#define AT91_DBGU_MR (0x04) /* Mode Register */
-#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */
-#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
-#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
-#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */
-#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */
-#define AT91_DBGU_SR (0x14) /* Status Register */
-#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */
-#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
-#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */
-#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */
-#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */
-#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
-
-/*
- * Some AT91 parts that don't have full DEBUG units still support the ID
- * and extensions register.
- */
-#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
-#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
-#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
-#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
-#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
-#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
-#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
-#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
-#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
-#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
-#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
-#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
-#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
-#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
-#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
-#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
-#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
-#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
-#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
-#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
-#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
-#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
-
-#endif
.extern at91_ramc_base
#endif
-#define AT91_MEMCTRL_MC 0
-#define AT91_MEMCTRL_SDRAMC 1
-#define AT91_MEMCTRL_DDRSDR 2
-
#include <soc/at91/at91rm9200_sdramc.h>
#include <soc/at91/at91sam9_ddrsdr.h>
#include <soc/at91/at91sam9_sdramc.h>
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91RM9200_ID_US0 6 /* USART 0 */
-#define AT91RM9200_ID_US1 7 /* USART 1 */
-#define AT91RM9200_ID_US2 8 /* USART 2 */
-#define AT91RM9200_ID_US3 9 /* USART 3 */
-#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP 11 /* USB Device Port */
-#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
-#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
-#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
-#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
-#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
-#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
-#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
-#define AT91RM9200_ID_UHP 23 /* USB Host port */
-#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0 0xfffa0000
-#define AT91RM9200_BASE_TC0 0xfffa0000
-#define AT91RM9200_BASE_TC1 0xfffa0040
-#define AT91RM9200_BASE_TC2 0xfffa0080
-#define AT91RM9200_BASE_TCB1 0xfffa4000
-#define AT91RM9200_BASE_TC3 0xfffa4000
-#define AT91RM9200_BASE_TC4 0xfffa4040
-#define AT91RM9200_BASE_TC5 0xfffa4080
-#define AT91RM9200_BASE_UDP 0xfffb0000
-#define AT91RM9200_BASE_MCI 0xfffb4000
-#define AT91RM9200_BASE_TWI 0xfffb8000
-#define AT91RM9200_BASE_EMAC 0xfffbc000
-#define AT91RM9200_BASE_US0 0xfffc0000
-#define AT91RM9200_BASE_US1 0xfffc4000
-#define AT91RM9200_BASE_US2 0xfffc8000
-#define AT91RM9200_BASE_US3 0xfffcc000
-#define AT91RM9200_BASE_SSC0 0xfffd0000
-#define AT91RM9200_BASE_SSC1 0xfffd4000
-#define AT91RM9200_BASE_SSC2 0xfffd8000
-#define AT91RM9200_BASE_SPI 0xfffe0000
-
-
-/*
- * System Peripherals
- */
-#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */
-#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */
-#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */
-#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */
-#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */
-#define AT91RM9200_BASE_ST 0xfffffd00 /* System Timer */
-#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
-#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * Includes also definitions for AT91SAM9XE and AT91SAM9G families
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0 6 /* USART 0 */
-#define AT91SAM9260_ID_US1 7 /* USART 1 */
-#define AT91SAM9260_ID_US2 8 /* USART 2 */
-#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP 20 /* USB Host port */
-#define AT91SAM9260_ID_EMAC 21 /* Ethernet */
-#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */
-#define AT91SAM9260_ID_US3 23 /* USART 3 */
-#define AT91SAM9260_ID_US4 24 /* USART 4 */
-#define AT91SAM9260_ID_US5 25 /* USART 5 */
-#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0 0xfffa0000
-#define AT91SAM9260_BASE_TC0 0xfffa0000
-#define AT91SAM9260_BASE_TC1 0xfffa0040
-#define AT91SAM9260_BASE_TC2 0xfffa0080
-#define AT91SAM9260_BASE_UDP 0xfffa4000
-#define AT91SAM9260_BASE_MCI 0xfffa8000
-#define AT91SAM9260_BASE_TWI 0xfffac000
-#define AT91SAM9260_BASE_US0 0xfffb0000
-#define AT91SAM9260_BASE_US1 0xfffb4000
-#define AT91SAM9260_BASE_US2 0xfffb8000
-#define AT91SAM9260_BASE_SSC 0xfffbc000
-#define AT91SAM9260_BASE_ISI 0xfffc0000
-#define AT91SAM9260_BASE_EMAC 0xfffc4000
-#define AT91SAM9260_BASE_SPI0 0xfffc8000
-#define AT91SAM9260_BASE_SPI1 0xfffcc000
-#define AT91SAM9260_BASE_US3 0xfffd0000
-#define AT91SAM9260_BASE_US4 0xfffd4000
-#define AT91SAM9260_BASE_US5 0xfffd8000
-#define AT91SAM9260_BASE_TCB1 0xfffdc000
-#define AT91SAM9260_BASE_TC3 0xfffdc000
-#define AT91SAM9260_BASE_TC4 0xfffdc040
-#define AT91SAM9260_BASE_TC5 0xfffdc080
-#define AT91SAM9260_BASE_ADC 0xfffe0000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9260_BASE_ECC 0xffffe800
-#define AT91SAM9260_BASE_SDRAMC 0xffffea00
-#define AT91SAM9260_BASE_SMC 0xffffec00
-#define AT91SAM9260_BASE_MATRIX 0xffffee00
-#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0
-#define AT91SAM9260_BASE_PIOA 0xfffff400
-#define AT91SAM9260_BASE_PIOB 0xfffff600
-#define AT91SAM9260_BASE_PIOC 0xfffff800
-#define AT91SAM9260_BASE_RSTC 0xfffffd00
-#define AT91SAM9260_BASE_SHDWC 0xfffffd10
-#define AT91SAM9260_BASE_RTT 0xfffffd20
-#define AT91SAM9260_BASE_PIT 0xfffffd30
-#define AT91SAM9260_BASE_WDT 0xfffffd40
-#define AT91SAM9260_BASE_GPBR 0xfffffd50
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
-#define AT91SAM9260_SRAM_BASE 0x002FF000 /* Internal SRAM base address */
-#define AT91SAM9260_SRAM_SIZE SZ_8K /* Internal SRAM size (8Kb) */
-
-#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
-
-#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
-#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-
-#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
-#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */
-#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
-#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
-#define AT91SAM9G20_SRAM_BASE 0x002FC000 /* Internal SRAM base address */
-#define AT91SAM9G20_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
-
-#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0 6 /* USART 0 */
-#define AT91SAM9261_ID_US1 7 /* USART 1 */
-#define AT91SAM9261_ID_US2 8 /* USART 2 */
-#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP 20 /* USB Host port */
-#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
-#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0 0xfffa0000
-#define AT91SAM9261_BASE_TC0 0xfffa0000
-#define AT91SAM9261_BASE_TC1 0xfffa0040
-#define AT91SAM9261_BASE_TC2 0xfffa0080
-#define AT91SAM9261_BASE_UDP 0xfffa4000
-#define AT91SAM9261_BASE_MCI 0xfffa8000
-#define AT91SAM9261_BASE_TWI 0xfffac000
-#define AT91SAM9261_BASE_US0 0xfffb0000
-#define AT91SAM9261_BASE_US1 0xfffb4000
-#define AT91SAM9261_BASE_US2 0xfffb8000
-#define AT91SAM9261_BASE_SSC0 0xfffbc000
-#define AT91SAM9261_BASE_SSC1 0xfffc0000
-#define AT91SAM9261_BASE_SSC2 0xfffc4000
-#define AT91SAM9261_BASE_SPI0 0xfffc8000
-#define AT91SAM9261_BASE_SPI1 0xfffcc000
-
-
-/*
- * System Peripherals
- */
-#define AT91SAM9261_BASE_SMC 0xffffec00
-#define AT91SAM9261_BASE_MATRIX 0xffffee00
-#define AT91SAM9261_BASE_SDRAMC 0xffffea00
-#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0
-#define AT91SAM9261_BASE_PIOA 0xfffff400
-#define AT91SAM9261_BASE_PIOB 0xfffff600
-#define AT91SAM9261_BASE_PIOC 0xfffff800
-#define AT91SAM9261_BASE_RSTC 0xfffffd00
-#define AT91SAM9261_BASE_SHDWC 0xfffffd10
-#define AT91SAM9261_BASE_RTT 0xfffffd20
-#define AT91SAM9261_BASE_PIT 0xfffffd30
-#define AT91SAM9261_BASE_WDT 0xfffffd40
-#define AT91SAM9261_BASE_GPBR 0xfffffd50
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
-
-#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */
-#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */
-
-#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
-#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9263.h
- *
- * (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_H
-#define AT91SAM9263_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
-#define AT91SAM9263_ID_US0 7 /* USART 0 */
-#define AT91SAM9263_ID_US1 8 /* USART 1 */
-#define AT91SAM9263_ID_US2 9 /* USART 2 */
-#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
-#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
-#define AT91SAM9263_ID_CAN 12 /* CAN */
-#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
-#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
-#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
-#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
-#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
-#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
-#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
-#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
-#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
-#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
-#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
-#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
-#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
-#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
-#define AT91SAM9263_ID_UHP 29 /* USB Host port */
-#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9263_BASE_UDP 0xfff78000
-#define AT91SAM9263_BASE_TCB0 0xfff7c000
-#define AT91SAM9263_BASE_TC0 0xfff7c000
-#define AT91SAM9263_BASE_TC1 0xfff7c040
-#define AT91SAM9263_BASE_TC2 0xfff7c080
-#define AT91SAM9263_BASE_MCI0 0xfff80000
-#define AT91SAM9263_BASE_MCI1 0xfff84000
-#define AT91SAM9263_BASE_TWI 0xfff88000
-#define AT91SAM9263_BASE_US0 0xfff8c000
-#define AT91SAM9263_BASE_US1 0xfff90000
-#define AT91SAM9263_BASE_US2 0xfff94000
-#define AT91SAM9263_BASE_SSC0 0xfff98000
-#define AT91SAM9263_BASE_SSC1 0xfff9c000
-#define AT91SAM9263_BASE_AC97C 0xfffa0000
-#define AT91SAM9263_BASE_SPI0 0xfffa4000
-#define AT91SAM9263_BASE_SPI1 0xfffa8000
-#define AT91SAM9263_BASE_CAN 0xfffac000
-#define AT91SAM9263_BASE_PWMC 0xfffb8000
-#define AT91SAM9263_BASE_EMAC 0xfffbc000
-#define AT91SAM9263_BASE_ISI 0xfffc4000
-#define AT91SAM9263_BASE_2DGE 0xfffc8000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9263_BASE_ECC0 0xffffe000
-#define AT91SAM9263_BASE_SDRAMC0 0xffffe200
-#define AT91SAM9263_BASE_SMC0 0xffffe400
-#define AT91SAM9263_BASE_ECC1 0xffffe600
-#define AT91SAM9263_BASE_SDRAMC1 0xffffe800
-#define AT91SAM9263_BASE_SMC1 0xffffea00
-#define AT91SAM9263_BASE_MATRIX 0xffffec00
-#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1
-#define AT91SAM9263_BASE_PIOA 0xfffff200
-#define AT91SAM9263_BASE_PIOB 0xfffff400
-#define AT91SAM9263_BASE_PIOC 0xfffff600
-#define AT91SAM9263_BASE_PIOD 0xfffff800
-#define AT91SAM9263_BASE_PIOE 0xfffffa00
-#define AT91SAM9263_BASE_RSTC 0xfffffd00
-#define AT91SAM9263_BASE_SHDWC 0xfffffd10
-#define AT91SAM9263_BASE_RTT0 0xfffffd20
-#define AT91SAM9263_BASE_PIT 0xfffffd30
-#define AT91SAM9263_BASE_WDT 0xfffffd40
-#define AT91SAM9263_BASE_RTT1 0xfffffd50
-#define AT91SAM9263_BASE_GPBR 0xfffffd60
-
-#define AT91_SMC AT91_SMC0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
-#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
-
-#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
-#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
-#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
-#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
-
-
-#endif
#ifndef AT91SAM9_SMC_H
#define AT91SAM9_SMC_H
-#include <mach/cpu.h>
-
#ifndef __ASSEMBLY__
struct sam9_smc_config {
/* Setup register */
+++ /dev/null
-/*
- * Chip-specific header file for the AT91SAM9G45 family
- *
- * Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_H
-#define AT91SAM9G45_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */
-#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */
-#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */
-#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */
-#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */
-#define AT91SAM9G45_ID_US0 7 /* USART 0 */
-#define AT91SAM9G45_ID_US1 8 /* USART 1 */
-#define AT91SAM9G45_ID_US2 9 /* USART 2 */
-#define AT91SAM9G45_ID_US3 10 /* USART 3 */
-#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */
-#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */
-#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */
-#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */
-#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */
-#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */
-#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */
-#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */
-#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */
-#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */
-#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */
-#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */
-#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */
-#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9G45_BASE_UDPHS 0xfff78000
-#define AT91SAM9G45_BASE_TCB0 0xfff7c000
-#define AT91SAM9G45_BASE_TC0 0xfff7c000
-#define AT91SAM9G45_BASE_TC1 0xfff7c040
-#define AT91SAM9G45_BASE_TC2 0xfff7c080
-#define AT91SAM9G45_BASE_MCI0 0xfff80000
-#define AT91SAM9G45_BASE_TWI0 0xfff84000
-#define AT91SAM9G45_BASE_TWI1 0xfff88000
-#define AT91SAM9G45_BASE_US0 0xfff8c000
-#define AT91SAM9G45_BASE_US1 0xfff90000
-#define AT91SAM9G45_BASE_US2 0xfff94000
-#define AT91SAM9G45_BASE_US3 0xfff98000
-#define AT91SAM9G45_BASE_SSC0 0xfff9c000
-#define AT91SAM9G45_BASE_SSC1 0xfffa0000
-#define AT91SAM9G45_BASE_SPI0 0xfffa4000
-#define AT91SAM9G45_BASE_SPI1 0xfffa8000
-#define AT91SAM9G45_BASE_AC97C 0xfffac000
-#define AT91SAM9G45_BASE_TSC 0xfffb0000
-#define AT91SAM9G45_BASE_ISI 0xfffb4000
-#define AT91SAM9G45_BASE_PWMC 0xfffb8000
-#define AT91SAM9G45_BASE_EMAC 0xfffbc000
-#define AT91SAM9G45_BASE_AES 0xfffc0000
-#define AT91SAM9G45_BASE_TDES 0xfffc4000
-#define AT91SAM9G45_BASE_SHA 0xfffc8000
-#define AT91SAM9G45_BASE_TRNG 0xfffcc000
-#define AT91SAM9G45_BASE_MCI1 0xfffd0000
-#define AT91SAM9G45_BASE_TCB1 0xfffd4000
-#define AT91SAM9G45_BASE_TC3 0xfffd4000
-#define AT91SAM9G45_BASE_TC4 0xfffd4040
-#define AT91SAM9G45_BASE_TC5 0xfffd4080
-
-/*
- * System Peripherals
- */
-#define AT91SAM9G45_BASE_ECC 0xffffe200
-#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400
-#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600
-#define AT91SAM9G45_BASE_DMA 0xffffec00
-#define AT91SAM9G45_BASE_SMC 0xffffe800
-#define AT91SAM9G45_BASE_MATRIX 0xffffea00
-#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1
-#define AT91SAM9G45_BASE_PIOA 0xfffff200
-#define AT91SAM9G45_BASE_PIOB 0xfffff400
-#define AT91SAM9G45_BASE_PIOC 0xfffff600
-#define AT91SAM9G45_BASE_PIOD 0xfffff800
-#define AT91SAM9G45_BASE_PIOE 0xfffffa00
-#define AT91SAM9G45_BASE_RSTC 0xfffffd00
-#define AT91SAM9G45_BASE_SHDWC 0xfffffd10
-#define AT91SAM9G45_BASE_RTT 0xfffffd20
-#define AT91SAM9G45_BASE_PIT 0xfffffd30
-#define AT91SAM9G45_BASE_WDT 0xfffffd40
-#define AT91SAM9G45_BASE_RTC 0xfffffdb0
-#define AT91SAM9G45_BASE_GPBR 0xfffffd60
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */
-
-#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
-
-#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
-#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */
-#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
-#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
-
-/*
- * DMA peripheral identifiers
- * for hardware handshaking interface
- */
-#define AT_DMA_ID_MCI0 0
-#define AT_DMA_ID_SPI0_TX 1
-#define AT_DMA_ID_SPI0_RX 2
-#define AT_DMA_ID_SPI1_TX 3
-#define AT_DMA_ID_SPI1_RX 4
-#define AT_DMA_ID_SSC0_TX 5
-#define AT_DMA_ID_SSC0_RX 6
-#define AT_DMA_ID_SSC1_TX 7
-#define AT_DMA_ID_SSC1_RX 8
-#define AT_DMA_ID_AC97_TX 9
-#define AT_DMA_ID_AC97_RX 10
-#define AT_DMA_ID_AES_TX 11
-#define AT_DMA_ID_AES_RX 12
-#define AT_DMA_ID_MCI1 13
-
-#endif
+++ /dev/null
-/*
- * SoC specific header file for the AT91SAM9N12
- *
- * Copyright (C) 2012 Atmel Corporation
- *
- * Common definitions, based on AT91SAM9N12 SoC datasheet
- *
- * Licensed under GPLv2 or later
- */
-
-#ifndef _AT91SAM9N12_H_
-#define _AT91SAM9N12_H_
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */
-#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */
-#define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */
-#define AT91SAM9N12_ID_USART0 5 /* USART 0 */
-#define AT91SAM9N12_ID_USART1 6 /* USART 1 */
-#define AT91SAM9N12_ID_USART2 7 /* USART 2 */
-#define AT91SAM9N12_ID_USART3 8 /* USART 3 */
-#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */
-#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */
-#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */
-#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */
-#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */
-#define AT91SAM9N12_ID_UART0 15 /* UART 0 */
-#define AT91SAM9N12_ID_UART1 16 /* UART 1 */
-#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */
-#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */
-#define AT91SAM9N12_ID_DMA 20 /* DMA Controller */
-#define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */
-#define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */
-#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */
-#define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */
-#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */
-#define AT91SAM9N12_ID_TRNG 30 /* TRNG */
-#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9N12_BASE_USART0 0xf801c000
-#define AT91SAM9N12_BASE_USART1 0xf8020000
-#define AT91SAM9N12_BASE_USART2 0xf8024000
-#define AT91SAM9N12_BASE_USART3 0xf8028000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9N12_BASE_RTC 0xfffffeb0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
-
-#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * Common definitions.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_H
-#define AT91SAM9RL_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0 6 /* USART 0 */
-#define AT91SAM9RL_ID_US1 7 /* USART 1 */
-#define AT91SAM9RL_ID_US2 8 /* USART 2 */
-#define AT91SAM9RL_ID_US3 9 /* USART 3 */
-#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
-#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
-#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
-#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9RL_BASE_TCB0 0xfffa0000
-#define AT91SAM9RL_BASE_TC0 0xfffa0000
-#define AT91SAM9RL_BASE_TC1 0xfffa0040
-#define AT91SAM9RL_BASE_TC2 0xfffa0080
-#define AT91SAM9RL_BASE_MCI 0xfffa4000
-#define AT91SAM9RL_BASE_TWI0 0xfffa8000
-#define AT91SAM9RL_BASE_TWI1 0xfffac000
-#define AT91SAM9RL_BASE_US0 0xfffb0000
-#define AT91SAM9RL_BASE_US1 0xfffb4000
-#define AT91SAM9RL_BASE_US2 0xfffb8000
-#define AT91SAM9RL_BASE_US3 0xfffbc000
-#define AT91SAM9RL_BASE_SSC0 0xfffc0000
-#define AT91SAM9RL_BASE_SSC1 0xfffc4000
-#define AT91SAM9RL_BASE_PWMC 0xfffc8000
-#define AT91SAM9RL_BASE_SPI 0xfffcc000
-#define AT91SAM9RL_BASE_TSC 0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
-#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91SAM9RL_BASE_DMA 0xffffe600
-#define AT91SAM9RL_BASE_ECC 0xffffe800
-#define AT91SAM9RL_BASE_SDRAMC 0xffffea00
-#define AT91SAM9RL_BASE_SMC 0xffffec00
-#define AT91SAM9RL_BASE_MATRIX 0xffffee00
-#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0
-#define AT91SAM9RL_BASE_PIOA 0xfffff400
-#define AT91SAM9RL_BASE_PIOB 0xfffff600
-#define AT91SAM9RL_BASE_PIOC 0xfffff800
-#define AT91SAM9RL_BASE_PIOD 0xfffffa00
-#define AT91SAM9RL_BASE_RSTC 0xfffffd00
-#define AT91SAM9RL_BASE_SHDWC 0xfffffd10
-#define AT91SAM9RL_BASE_RTT 0xfffffd20
-#define AT91SAM9RL_BASE_PIT 0xfffffd30
-#define AT91SAM9RL_BASE_WDT 0xfffffd40
-#define AT91SAM9RL_BASE_GPBR 0xfffffd60
-#define AT91SAM9RL_BASE_RTC 0xfffffe00
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-
-#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
-
-#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
-
-#endif
+++ /dev/null
-/*
- * Chip-specific header file for the AT91SAM9x5 family
- *
- * Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9x5 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_H
-#define AT91SAM9X5_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */
-#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */
-#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */
-#define AT91SAM9X5_ID_USART0 5 /* USART 0 */
-#define AT91SAM9X5_ID_USART1 6 /* USART 1 */
-#define AT91SAM9X5_ID_USART2 7 /* USART 2 */
-#define AT91SAM9X5_ID_USART3 8 /* USART 3 */
-#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */
-#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */
-#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */
-#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */
-#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */
-#define AT91SAM9X5_ID_UART0 15 /* UART 0 */
-#define AT91SAM9X5_ID_UART1 16 /* UART 1 */
-#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */
-#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */
-#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */
-#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */
-#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */
-#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */
-#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */
-#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */
-#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */
-#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */
-#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */
-#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */
-#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */
-#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9X5_BASE_USART0 0xf801c000
-#define AT91SAM9X5_BASE_USART1 0xf8020000
-#define AT91SAM9X5_BASE_USART2 0xf8024000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_RTC 0xfffffeb0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
-
-#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/cpu.h
- *
- * Copyright (C) 2006 SAN People
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __MACH_CPU_H__
-#define __MACH_CPU_H__
-
-#define ARCH_ID_AT91RM9200 0x09290780
-#define ARCH_ID_AT91SAM9260 0x019803a0
-#define ARCH_ID_AT91SAM9261 0x019703a0
-#define ARCH_ID_AT91SAM9263 0x019607a0
-#define ARCH_ID_AT91SAM9G10 0x019903a0
-#define ARCH_ID_AT91SAM9G20 0x019905a0
-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-#define ARCH_ID_AT91SAM9G45 0x819b05a0
-#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
-#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
-#define ARCH_ID_AT91SAM9X5 0x819a05a0
-#define ARCH_ID_AT91SAM9N12 0x819a07a0
-
-#define ARCH_ID_AT91SAM9XE128 0x329973a0
-#define ARCH_ID_AT91SAM9XE256 0x329a93a0
-#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-
-#define ARCH_ID_AT91M40800 0x14080044
-#define ARCH_ID_AT91R40807 0x44080746
-#define ARCH_ID_AT91M40807 0x14080745
-#define ARCH_ID_AT91R40008 0x44000840
-
-#define ARCH_ID_SAMA5 0x8A5C07C0
-
-#define ARCH_EXID_AT91SAM9M11 0x00000001
-#define ARCH_EXID_AT91SAM9M10 0x00000002
-#define ARCH_EXID_AT91SAM9G46 0x00000003
-#define ARCH_EXID_AT91SAM9G45 0x00000004
-
-#define ARCH_EXID_AT91SAM9G15 0x00000000
-#define ARCH_EXID_AT91SAM9G35 0x00000001
-#define ARCH_EXID_AT91SAM9X35 0x00000002
-#define ARCH_EXID_AT91SAM9G25 0x00000003
-#define ARCH_EXID_AT91SAM9X25 0x00000004
-
-#define ARCH_EXID_SAMA5D3 0x00004300
-#define ARCH_EXID_SAMA5D31 0x00444300
-#define ARCH_EXID_SAMA5D33 0x00414300
-#define ARCH_EXID_SAMA5D34 0x00414301
-#define ARCH_EXID_SAMA5D35 0x00584300
-#define ARCH_EXID_SAMA5D36 0x00004301
-
-#define ARCH_EXID_SAMA5D4 0x00000007
-#define ARCH_EXID_SAMA5D41 0x00000001
-#define ARCH_EXID_SAMA5D42 0x00000002
-#define ARCH_EXID_SAMA5D43 0x00000003
-#define ARCH_EXID_SAMA5D44 0x00000004
-
-#define ARCH_FAMILY_AT91SAM9 0x01900000
-#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-
-/* RM9200 type */
-#define ARCH_REVISON_9200_BGA (0 << 0)
-#define ARCH_REVISON_9200_PQFP (1 << 0)
-
-#ifndef __ASSEMBLY__
-enum at91_soc_type {
- /* 920T */
- AT91_SOC_RM9200,
-
- /* SAM92xx */
- AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
-
- /* SAM9Gxx */
- AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45,
-
- /* SAM9RL */
- AT91_SOC_SAM9RL,
-
- /* SAM9X5 */
- AT91_SOC_SAM9X5,
-
- /* SAM9N12 */
- AT91_SOC_SAM9N12,
-
- /* SAMA5D3 */
- AT91_SOC_SAMA5D3,
-
- /* SAMA5D4 */
- AT91_SOC_SAMA5D4,
-
- /* Unknown type */
- AT91_SOC_UNKNOWN,
-};
-
-enum at91_soc_subtype {
- /* RM9200 */
- AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
-
- /* SAM9260 */
- AT91_SOC_SAM9XE,
-
- /* SAM9G45 */
- AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11,
-
- /* SAM9X5 */
- AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
- AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
-
- /* SAMA5D3 */
- AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
- AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36,
-
- /* SAMA5D4 */
- AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43,
- AT91_SOC_SAMA5D44,
-
- /* No subtype for this SoC */
- AT91_SOC_SUBTYPE_NONE,
-
- /* Unknown subtype */
- AT91_SOC_SUBTYPE_UNKNOWN,
-};
-
-struct at91_socinfo {
- unsigned int type, subtype;
- unsigned int cidr, exid;
-};
-
-extern struct at91_socinfo at91_soc_initdata;
-const char *at91_get_soc_type(struct at91_socinfo *c);
-const char *at91_get_soc_subtype(struct at91_socinfo *c);
-
-static inline int at91_soc_is_detected(void)
-{
- return at91_soc_initdata.type != AT91_SOC_UNKNOWN;
-}
-
-#ifdef CONFIG_SOC_AT91RM9200
-#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200)
-#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
-#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
-#else
-#define cpu_is_at91rm9200() (0)
-#define cpu_is_at91rm9200_bga() (0)
-#define cpu_is_at91rm9200_pqfp() (0)
-#endif
-
-#ifdef CONFIG_SOC_AT91SAM9
-#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
-#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260)
-#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261)
-#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10)
-#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263)
-#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL)
-#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45)
-#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
-#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
-#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46)
-#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11)
-#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5)
-#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
-#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
-#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35)
-#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25)
-#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25)
-#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12)
-#else
-#define cpu_is_at91sam9xe() (0)
-#define cpu_is_at91sam9260() (0)
-#define cpu_is_at91sam9g20() (0)
-#define cpu_is_at91sam9261() (0)
-#define cpu_is_at91sam9g10() (0)
-#define cpu_is_at91sam9263() (0)
-#define cpu_is_at91sam9rl() (0)
-#define cpu_is_at91sam9g45() (0)
-#define cpu_is_at91sam9g45es() (0)
-#define cpu_is_at91sam9m10() (0)
-#define cpu_is_at91sam9g46() (0)
-#define cpu_is_at91sam9m11() (0)
-#define cpu_is_at91sam9x5() (0)
-#define cpu_is_at91sam9g15() (0)
-#define cpu_is_at91sam9g35() (0)
-#define cpu_is_at91sam9x35() (0)
-#define cpu_is_at91sam9g25() (0)
-#define cpu_is_at91sam9x25() (0)
-#define cpu_is_at91sam9n12() (0)
-#endif
-
-#ifdef CONFIG_SOC_SAMA5D3
-#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3)
-#else
-#define cpu_is_sama5d3() (0)
-#endif
-
-#ifdef CONFIG_SOC_SAMA5D4
-#define cpu_is_sama5d4() (at91_soc_initdata.type == AT91_SOC_SAMA5D4)
-#else
-#define cpu_is_sama5d4() (0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000() (0)
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MACH_CPU_H__ */
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/hardware.h
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* DBGU base */
-/* rm9200, 9260/9g20, 9261/9g10, 9rl */
-#define AT91_BASE_DBGU0 0xfffff200
-/* 9263, 9g45, sama5d3 */
-#define AT91_BASE_DBGU1 0xffffee00
-/* sama5d4 */
-#define AT91_BASE_DBGU2 0xfc069000
-
-#include <mach/at91rm9200.h>
-#include <mach/at91sam9260.h>
-#include <mach/at91sam9261.h>
-#include <mach/at91sam9263.h>
-#include <mach/at91sam9rl.h>
-#include <mach/at91sam9g45.h>
-#include <mach/at91sam9x5.h>
-#include <mach/at91sam9n12.h>
-#include <mach/sama5d3.h>
-#include <mach/sama5d4.h>
-
-/*
- * On all at91 except rm9200 and x40 have the System Controller starts
- * at address 0xffffc000 and has a size of 16KiB.
- *
- * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
- * at 0xfffff000
- *
- * Removes the individual definitions of AT91_BASE_SYS and
- * replaces them with a common version at base 0xfffffc000 and size 16KiB
- * and map the same memory space
- */
-#define AT91_BASE_SYS 0xffffc000
-
-/*
- * On sama5d4 there is no system controller, we map some needed peripherals
- */
-#define AT91_ALT_BASE_SYS 0xfc069000
-
-/*
- * On all at91 have the Advanced Interrupt Controller starts at address
- * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
- */
-#define AT91_AIC 0xfffff000
-#define AT91_PMC 0xfffffc00
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000. (544Kb)
- */
-#define AT91_IO_PHYS_BASE 0xFFF78000
-#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE)
-
-/*
- * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000
- * to 0xFB069000 .. 0xFB06F000. (24Kb)
- */
-#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS
-#define AT91_ALT_IO_VIRT_BASE IOMEM(0xFB069000)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE)
-
-#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS
-#define AT91_ALT_IO_VIRT_BASE IOMEM(AT91_ALT_BASE_SYS)
-#endif
-
-#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-#define AT91_ALT_IO_P2V(x) ((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_ALT_VA_BASE_SYS AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX SZ_1M
-#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0 0x10000000
-#define AT91_CHIPSELECT_1 0x20000000
-#define AT91_CHIPSELECT_2 0x30000000
-#define AT91_CHIPSELECT_3 0x40000000
-#define AT91_CHIPSELECT_4 0x50000000
-#define AT91_CHIPSELECT_5 0x60000000
-#define AT91_CHIPSELECT_6 0x70000000
-#define AT91_CHIPSELECT_7 0x80000000
-
-/* Clocks */
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-/*
- * FIXME: this is needed to communicate between the pinctrl driver and
- * the PM implementation in the machine. Possibly part of the PM
- * implementation should be moved down into the pinctrl driver and get
- * called as part of the generic suspend/resume path.
- */
-#ifndef __ASSEMBLY__
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#endif
-
-#endif
+++ /dev/null
-/*
- * Chip-specific header file for the SAMA5D3 family
- *
- * Copyright (C) 2013 Atmel,
- * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Common definitions.
- * Based on SAMA5D3 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef SAMA5D3_H
-#define SAMA5D3_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */
-#define AT91_ID_PIT 3 /* PIT */
-#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */
-#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */
-#define SAMA5D3_ID_PIOA 6 /* PIOA */
-#define SAMA5D3_ID_PIOB 7 /* PIOB */
-#define SAMA5D3_ID_PIOC 8 /* PIOC */
-#define SAMA5D3_ID_PIOD 9 /* PIOD */
-#define SAMA5D3_ID_PIOE 10 /* PIOE */
-#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */
-#define SAMA5D3_ID_USART0 12 /* USART0 */
-#define SAMA5D3_ID_USART1 13 /* USART1 */
-#define SAMA5D3_ID_USART2 14 /* USART2 */
-#define SAMA5D3_ID_USART3 15 /* USART3 */
-#define SAMA5D3_ID_UART0 16 /* UART 0 */
-#define SAMA5D3_ID_UART1 17 /* UART 1 */
-#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */
-#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */
-#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */
-#define SAMA5D3_ID_HSMCI0 21 /* MCI */
-#define SAMA5D3_ID_HSMCI1 22 /* MCI */
-#define SAMA5D3_ID_HSMCI2 23 /* MCI */
-#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */
-#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */
-#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */
-#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */
-#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */
-#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */
-#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */
-#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */
-#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */
-#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */
-#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */
-#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */
-#define SAMA5D3_ID_LCDC 36 /* LCD Controller */
-#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */
-#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */
-#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */
-#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */
-#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */
-#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */
-#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */
-#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */
-#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */
-#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define SAMA5D3_BASE_USART0 0xf001c000
-#define SAMA5D3_BASE_USART1 0xf0020000
-#define SAMA5D3_BASE_USART2 0xf8020000
-#define SAMA5D3_BASE_USART3 0xf8024000
-
-/*
- * System Peripherals
- */
-#define SAMA5D3_BASE_RTC 0xfffffeb0
-
-/*
- * Internal Memory
- */
-#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */
-
-#endif
+++ /dev/null
-/*
- * Chip-specific header file for the SAMA5D4 family
- *
- * Copyright (C) 2013 Atmel Corporation,
- * Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Common definitions.
- * Based on SAMA5D4 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef SAMA5D4_H
-#define SAMA5D4_H
-
-/*
- * User Peripheral physical base addresses.
- */
-#define SAMA5D4_BASE_USART3 0xfc00c000 /* (USART3 non-secure) Base Address */
-#define SAMA5D4_BASE_PMC 0xf0018000 /* (PMC) Base Address */
-#define SAMA5D4_BASE_MPDDRC 0xf0010000 /* (MPDDRC) Base Address */
-#define SAMA5D4_BASE_PIOD 0xfc068000 /* (PIOD) Base Address */
-
-/* Some other peripherals */
-#define SAMA5D4_BASE_SYS2 SAMA5D4_BASE_PIOD
-
-/*
- * Internal Memory.
- */
-#define SAMA5D4_NS_SRAM_BASE 0x00210000 /* Internal SRAM base address Non-Secure */
-#define SAMA5D4_NS_SRAM_SIZE (64 * SZ_1K) /* Internal SRAM size Non-Secure part (64Kb) */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/uncompress.h
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-#include <linux/atmel_serial.h>
-#include <mach/hardware.h>
-
-#include <mach/at91_dbgu.h>
-#include <mach/cpu.h>
-
-void __iomem *at91_uart;
-
-static const u32 uarts_rm9200[] = {
- AT91_BASE_DBGU0,
- AT91RM9200_BASE_US0,
- AT91RM9200_BASE_US1,
- AT91RM9200_BASE_US2,
- AT91RM9200_BASE_US3,
- 0,
-};
-
-static const u32 uarts_sam9260[] = {
- AT91_BASE_DBGU0,
- AT91SAM9260_BASE_US0,
- AT91SAM9260_BASE_US1,
- AT91SAM9260_BASE_US2,
- AT91SAM9260_BASE_US3,
- AT91SAM9260_BASE_US4,
- AT91SAM9260_BASE_US5,
- 0,
-};
-
-static const u32 uarts_sam9261[] = {
- AT91_BASE_DBGU0,
- AT91SAM9261_BASE_US0,
- AT91SAM9261_BASE_US1,
- AT91SAM9261_BASE_US2,
- 0,
-};
-
-static const u32 uarts_sam9263[] = {
- AT91_BASE_DBGU1,
- AT91SAM9263_BASE_US0,
- AT91SAM9263_BASE_US1,
- AT91SAM9263_BASE_US2,
- 0,
-};
-
-static const u32 uarts_sam9g45[] = {
- AT91_BASE_DBGU1,
- AT91SAM9G45_BASE_US0,
- AT91SAM9G45_BASE_US1,
- AT91SAM9G45_BASE_US2,
- AT91SAM9G45_BASE_US3,
- 0,
-};
-
-static const u32 uarts_sam9rl[] = {
- AT91_BASE_DBGU0,
- AT91SAM9RL_BASE_US0,
- AT91SAM9RL_BASE_US1,
- AT91SAM9RL_BASE_US2,
- AT91SAM9RL_BASE_US3,
- 0,
-};
-
-static const u32 uarts_sam9x5[] = {
- AT91_BASE_DBGU0,
- AT91SAM9X5_BASE_USART0,
- AT91SAM9X5_BASE_USART1,
- AT91SAM9X5_BASE_USART2,
- 0,
-};
-
-static const u32 uarts_sama5d3[] = {
- AT91_BASE_DBGU1,
- SAMA5D3_BASE_USART0,
- SAMA5D3_BASE_USART1,
- SAMA5D3_BASE_USART2,
- SAMA5D3_BASE_USART3,
- 0,
-};
-
-static const u32 uarts_sama5d4[] = {
- AT91_BASE_DBGU2,
- SAMA5D4_BASE_USART3,
- 0,
-};
-
-static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
-{
- u32 cidr, socid;
-
- cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
- socid = cidr & ~AT91_CIDR_VERSION;
-
- switch (socid) {
- case ARCH_ID_AT91RM9200:
- return uarts_rm9200;
-
- case ARCH_ID_AT91SAM9G20:
- case ARCH_ID_AT91SAM9260:
- return uarts_sam9260;
-
- case ARCH_ID_AT91SAM9261:
- return uarts_sam9261;
-
- case ARCH_ID_AT91SAM9263:
- return uarts_sam9263;
-
- case ARCH_ID_AT91SAM9G45:
- return uarts_sam9g45;
-
- case ARCH_ID_AT91SAM9RL64:
- return uarts_sam9rl;
-
- case ARCH_ID_AT91SAM9N12:
- case ARCH_ID_AT91SAM9X5:
- return uarts_sam9x5;
-
- case ARCH_ID_SAMA5:
- cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID);
- if (cidr & ARCH_EXID_SAMA5D3)
- return uarts_sama5d3;
- else if (cidr & ARCH_EXID_SAMA5D4)
- return uarts_sama5d4;
-
- break;
- }
-
- /* at91sam9g10 */
- if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
- return uarts_sam9261;
- }
- /* at91sam9xe */
- else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
- return uarts_sam9260;
- }
-
- return NULL;
-}
-
-static inline void arch_decomp_setup(void)
-{
- int i = 0;
- const u32* usarts;
-
- usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
- if (!usarts)
- usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
- if (!usarts)
- usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2);
- if (!usarts) {
- at91_uart = NULL;
- return;
- }
-
- do {
- /* physical address */
- at91_uart = (void __iomem *)usarts[i];
-
- if (__raw_readl(at91_uart + ATMEL_US_BRGR))
- return;
- i++;
- } while (usarts[i]);
-
- at91_uart = NULL;
-}
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- if (!at91_uart)
- return;
-
- while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
- barrier();
- __raw_writel(c, at91_uart + ATMEL_US_THR);
-}
-
-static inline void flush(void)
-{
- if (!at91_uart)
- return;
-
- /* wait for transmission to complete */
- while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
- barrier();
-}
-
-#endif
#include <asm/fncpy.h>
#include <asm/cacheflush.h>
-#include <mach/cpu.h>
-#include <mach/hardware.h>
-
#include "generic.h"
#include "pm.h"
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+
static struct {
unsigned long uhp_udp_mask;
int memctrl;
at91_cpuidle_device.dev.platform_data = at91_standby;
}
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+static void at91rm9200_standby(void)
+{
+ u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+
+ asm volatile(
+ "b 1f\n\t"
+ ".align 5\n\t"
+ "1: mcr p15, 0, %0, c7, c10, 4\n\t"
+ " str %0, [%1, %2]\n\t"
+ " str %3, [%1, %4]\n\t"
+ " mcr p15, 0, %0, c7, c0, 4\n\t"
+ " str %5, [%1, %2]"
+ :
+ : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
+ "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+ "r" (lpr));
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91_ddr_standby(void)
+{
+ /* Those two values allow us to delay self-refresh activation
+ * to the maximum. */
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
+
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+ lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ }
+
+ saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+ lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91sam9_sdram_standby(void)
+{
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
+
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+ lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+ }
+
+ saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+ lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
+}
+
static const struct of_device_id ramc_ids[] __initconst = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
#include <mach/at91_ramc.h>
+#define AT91_MEMCTRL_MC 0
+#define AT91_MEMCTRL_SDRAMC 1
+#define AT91_MEMCTRL_DDRSDR 2
+
#define AT91_PM_MEMTYPE_MASK 0x0f
#define AT91_PM_MODE_OFFSET 4
#define AT91_PM_SLOW_CLOCK 0x01
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-#ifndef __ASSEMBLY__
-static inline void at91rm9200_standby(void)
-{
- u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
- asm volatile(
- "b 1f\n\t"
- ".align 5\n\t"
- "1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
- " mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
- :
- : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
- "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
- "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
- /* Those two values allow us to delay self-refresh activation
- * to the maximum. */
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
- lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
- lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
- lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
- lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
- lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
- lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
- lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
- lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
-#endif
#endif
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
-#include <mach/hardware.h>
#include <mach/at91_ramc.h>
#include "pm.h"
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/hardware.h>
-
#include "generic.h"
#include "soc.h"
select ARCH_RMOBILE
select RENESAS_INTC_IRQPIN
+config ARCH_R8A7778
+ bool "R-Car M1A (R8A77781)"
+ select ARCH_RCAR_GEN1
+
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
+config ARCH_SH73A0
+ bool "SH-Mobile AG5 (R8A73A00)"
+ select ARCH_RMOBILE
+ select RENESAS_INTC_IRQPIN
+
comment "Renesas ARM SoCs Board Type"
config MACH_MARZEN
comment "Renesas ARM SoCs System Type"
-config ARCH_SH7372
- bool "SH-Mobile AP4 (SH7372)"
- select ARCH_RMOBILE
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_CPU_SUSPEND if PM || CPU_IDLE
- select SH_INTC
-
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
select SH_INTC
select RENESAS_INTC_IRQPIN
-config ARCH_R8A73A4
- bool "R-Mobile APE6 (R8A73A40)"
- select ARCH_RMOBILE
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select RENESAS_IRQC
-
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
comment "Renesas ARM SoCs Board Type"
-config MACH_APE6EVM
- bool "APE6EVM board"
- depends on ARCH_R8A73A4
- select SMSC_PHY if SMSC911X
- select USE_OF
-
-config MACH_APE6EVM_REFERENCE
- bool "APE6EVM board - Reference Device Tree Implementation"
- depends on ARCH_R8A73A4
- select SMSC_PHY if SMSC911X
- select USE_OF
- ---help---
- Use reference implementation of APE6EVM board support
- which makes a greater use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
-config MACH_MACKEREL
- bool "mackerel board"
- depends on ARCH_SH7372
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SMSC_PHY if SMSC911X
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select USE_OF
-
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
-config MACH_KZM9G_REFERENCE
- bool "KZM-A9-GT board - Reference Device Tree Implementation"
- depends on ARCH_SH73A0
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select USE_OF
- ---help---
- Use reference implementation of KZM-A9-GT board support
- which makes as greater use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
comment "Renesas ARM SoCs System Configuration"
config CPU_HAS_INTEVT
obj-y := timer.o console.o
# CPU objects
-obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o pm-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
# Clock objects
ifndef CONFIG_COMMON_CLK
obj-y += clock.o
-obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
-obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
-# special sh7372 handling for IRQ objects and low level sleep code
-obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o
-
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
else
-obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
-obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
-obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
-obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
+obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o
endif
# Framework support
# per-board load address for uImage
loadaddr-y :=
-loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
-loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
-loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
-loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
__ZRELADDR := $(sort $(loadaddr-y))
+++ /dev/null
-/*
- * APE6EVM board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_device.h>
-#include <linux/sh_clk.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a73a4.h"
-
-static void __init ape6evm_add_standard_devices(void)
-{
-
- struct clk *parent;
- struct clk *mp;
-
- r8a73a4_clock_init();
-
- /* MP clock parent = extal2 */
- parent = clk_get(NULL, "extal2");
- mp = clk_get(NULL, "mp");
- BUG_ON(IS_ERR(parent) || IS_ERR(mp));
-
- clk_set_parent(mp, parent);
- clk_put(parent);
- clk_put(mp);
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *ape6evm_boards_compat_dt[] __initdata = {
- "renesas,ape6evm-reference",
- NULL,
-};
-
-DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = shmobile_init_delay,
- .init_machine = ape6evm_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = ape6evm_boards_compat_dt,
-MACHINE_END
+++ /dev/null
-/*
- * APE6EVM board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_clk.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a73a4.h"
-
-/* LEDS */
-static struct gpio_led ape6evm_leds[] = {
- {
- .name = "gnss-en",
- .gpio = 28,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "nfc-nrst",
- .gpio = 126,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "gnss-nrst",
- .gpio = 132,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "bt-wakeup",
- .gpio = 232,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "strobe",
- .gpio = 250,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "bbresetout",
- .gpio = 288,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
-};
-
-static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = {
- .leds = ape6evm_leds,
- .num_leds = ARRAY_SIZE(ape6evm_leds),
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d, ...) \
- { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_0, 324, "S16"),
- GPIO_KEY(KEY_MENU, 325, "S17"),
- GPIO_KEY(KEY_HOME, 326, "S18"),
- GPIO_KEY(KEY_BACK, 327, "S19"),
- GPIO_KEY(KEY_VOLUMEUP, 328, "S20"),
- GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"),
-};
-
-static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* SMSC LAN9220 */
-static const struct resource lan9220_res[] __initconst = {
- DEFINE_RES_MEM(0x08000000, 0x1000),
- {
- .start = irq_pin(40), /* IRQ40 */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static const struct smsc911x_platform_config lan9220_data __initconst = {
- .flags = SMSC911X_USE_32BIT,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-};
-
-/*
- * MMC0 power supplies:
- * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage
- * regulator. Until support for it is added to this file we simulate the
- * Vcc supply by a fixed always-on regulator
- */
-static struct regulator_consumer_supply vcc_mmc0_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-};
-
-/*
- * SDHI0 power supplies:
- * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is
- * provided by the same tps80032 regulator as both MMC0 voltages - see comment
- * above
- */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers),
- .consumer_supplies = vcc_sdhi0_consumers,
-};
-
-static const struct fixed_voltage_config vcc_sdhi0_info __initconst = {
- .supply_name = "SDHI0 Vcc",
- .microvolts = 3300000,
- .gpio = 76,
- .enable_high = 1,
- .init_data = &vcc_sdhi0_init_data,
-};
-
-/*
- * SDHI1 power supplies:
- * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V
- */
-static struct regulator_consumer_supply vcc_sdhi1_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-};
-
-/* MMCIF */
-static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = {
- .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
- .slave_id_tx = SHDMA_SLAVE_MMCIF0_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF0_RX,
- .ccs_unsupported = true,
-};
-
-static const struct resource mmcif0_resources[] __initconst = {
- DEFINE_RES_MEM(0xee200000, 0x100),
- DEFINE_RES_IRQ(gic_spi(169)),
-};
-
-/* SDHI0 */
-static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = {
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
-};
-
-static const struct resource sdhi0_resources[] __initconst = {
- DEFINE_RES_MEM(0xee100000, 0x100),
- DEFINE_RES_IRQ(gic_spi(165)),
-};
-
-/* SDHI1 */
-static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = {
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_NEEDS_POLL,
-};
-
-static const struct resource sdhi1_resources[] __initconst = {
- DEFINE_RES_MEM(0xee120000, 0x100),
- DEFINE_RES_IRQ(gic_spi(166)),
-};
-
-static const struct pinctrl_map ape6evm_pinctrl_map[] __initconst = {
- /* SCIFA0 console */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
- "scifa0_data", "scifa0"),
- /* SMSC */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
- "irqc_irq40", "irqc"),
- /* MMCIF0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
- "mmc0_data8", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
- "mmc0_ctrl", "mmc0"),
- /* SDHI0: uSD: no WP */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
- "sdhi0_cd", "sdhi0"),
- /* SDHI1 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
- "sdhi1_data4", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
- "sdhi1_ctrl", "sdhi1"),
-};
-
-static void __init ape6evm_add_standard_devices(void)
-{
-
- struct clk *parent;
- struct clk *mp;
-
- r8a73a4_clock_init();
-
- /* MP clock parent = extal2 */
- parent = clk_get(NULL, "extal2");
- mp = clk_get(NULL, "mp");
- BUG_ON(IS_ERR(parent) || IS_ERR(mp));
-
- clk_set_parent(mp, parent);
- clk_put(parent);
- clk_put(mp);
-
- pinctrl_register_mappings(ape6evm_pinctrl_map,
- ARRAY_SIZE(ape6evm_pinctrl_map));
- r8a73a4_pinmux_init();
- r8a73a4_add_standard_devices();
-
- /* LAN9220 ethernet */
- gpio_request_one(270, GPIOF_OUT_INIT_HIGH, NULL); /* smsc9220 RESET */
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- platform_device_register_resndata(NULL, "smsc911x", -1,
- lan9220_res, ARRAY_SIZE(lan9220_res),
- &lan9220_data, sizeof(lan9220_data));
-
- regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers,
- ARRAY_SIZE(vcc_mmc0_consumers), 2800000);
- platform_device_register_resndata(NULL, "sh_mmcif", 0,
- mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
- &mmcif0_pdata, sizeof(mmcif0_pdata));
- platform_device_register_data(NULL, "reg-fixed-voltage", 2,
- &vcc_sdhi0_info, sizeof(vcc_sdhi0_info));
- platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
- sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
- &sdhi0_pdata, sizeof(sdhi0_pdata));
- regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers,
- ARRAY_SIZE(vcc_sdhi1_consumers), 3300000);
- platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1,
- sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
- &sdhi1_pdata, sizeof(sdhi1_pdata));
- platform_device_register_data(NULL, "gpio-keys", -1,
- &ape6evm_keys_pdata,
- sizeof(ape6evm_keys_pdata));
- platform_device_register_data(NULL, "leds-gpio", -1,
- &ape6evm_leds_pdata,
- sizeof(ape6evm_leds_pdata));
-}
-
-static void __init ape6evm_legacy_init_time(void)
-{
- /* Do not invoke DT-based timers via clocksource_of_init() */
-}
-
-static void __init ape6evm_legacy_init_irq(void)
-{
- void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000);
- void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000);
-
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
- /* Do not invoke DT-based interrupt code via irqchip_init() */
-}
-
-
-static const char *ape6evm_boards_compat_dt[] __initdata = {
- "renesas,ape6evm",
- NULL,
-};
-
-DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = shmobile_init_delay,
- .init_irq = ape6evm_legacy_init_irq,
- .init_machine = ape6evm_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = ape6evm_boards_compat_dt,
- .init_time = ape6evm_legacy_init_time,
-MACHINE_END
void __iomem *fpga;
void __iomem *pfc;
+#ifndef CONFIG_COMMON_CLK
r8a7778_clock_init();
+#endif
r8a7778_init_irq_extpin_dt(1);
r8a7778_add_dt_devices();
+++ /dev/null
-/*
- * KZM-A9-GT board support - Reference Device Tree Implementation
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on board-kzm9g.c
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/of_platform.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "sh73a0.h"
-
-static void __init kzm_init(void)
-{
- sh73a0_add_standard_devices_dt();
-
-#ifdef CONFIG_CACHE_L2X0
- /* Shared attribute override enable, 64K*8way */
- l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
- /* Do soft power on reset */
- writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
- "renesas,kzm9g-reference",
- NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
- .smp = smp_ops(sh73a0_smp_ops),
- .map_io = sh73a0_map_io,
- .init_early = shmobile_init_delay,
- .init_machine = kzm_init,
- .init_late = shmobile_init_late,
- .restart = kzm9g_restart,
- .dt_compat = kzm9g_boards_compat_dt,
-MACHINE_END
+++ /dev/null
-/*
- * mackerel board support
- *
- * Copyright (C) 2010 Renesas Solutions Corp.
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on ap4evb
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2008 Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_data/gpio_backlight.h>
-#include <linux/pm_clock.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/sh_clk.h>
-#include <linux/tca6416_keypad.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/dma-mapping.h>
-
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <media/soc_camera_platform.h>
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "intc.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "sh-gpio.h"
-#include "sh7372.h"
-
-/*
- * Address Interface BusWidth note
- * ------------------------------------------------------------------
- * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
- * 0x0800_0000 user area -
- * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
- * 0x1400_0000 Ether (LAN9220) 16bit
- * 0x1600_0000 user area - cannot use with NAND
- * 0x1800_0000 user area -
- * 0x1A00_0000 -
- * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
- */
-
-/*
- * CPU mode
- *
- * SW4 | Boot Area| Master | Remarks
- * 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor|
- * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
- * ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM
- * ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug
- * ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug
- * X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM
- * OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM
- * X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM
- * OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone
- * ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone
-*/
-
-/*
- * NOR Flash ROM
- *
- * SW1 | SW2 | SW7 | NOR Flash ROM
- * bit1 | bit1 bit2 | bit1 | Memory allocation
- * ------+------------+------+------------------
- * OFF | ON OFF | ON | Area 0
- * OFF | ON OFF | OFF | Area 4
- */
-
-/*
- * SMSC 9220
- *
- * SW1 SMSC 9220
- * -----------------------
- * ON access disable
- * OFF access enable
- */
-
-/*
- * NAND Flash ROM
- *
- * SW1 | SW2 | SW7 | NAND Flash ROM
- * bit1 | bit1 bit2 | bit2 | Memory allocation
- * ------+------------+------+------------------
- * OFF | ON OFF | ON | FCE 0
- * OFF | ON OFF | OFF | FCE 1
- */
-
-/*
- * External interrupt pin settings
- *
- * IRQX | pin setting | device | level
- * ------+--------------------+--------------------+-------
- * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
- * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
- * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
- * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
- * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
- * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
- * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High
- */
-
-/*
- * USB
- *
- * USB0 : CN22 : Function
- * USB1 : CN31 : Function/Host *1
- *
- * J30 (for CN31) *1
- * ----------+---------------+-------------
- * 1-2 short | VBUS 5V | Host
- * open | external VBUS | Function
- *
- * CAUTION
- *
- * renesas_usbhs driver can use external interrupt mode
- * (which come from USB-PHY) or autonomy mode (it use own interrupt)
- * for detecting connection/disconnection when Function.
- * USB will be power OFF while it has been disconnecting
- * if external interrupt mode, and it is always power ON if autonomy mode,
- *
- * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
- * because Touchscreen is using IRQ7-PORT40.
- * It is impossible to use IRQ7 demux on this board.
- */
-
-/*
- * SDHI0 (CN12)
- *
- * SW56 : OFF
- *
- */
-
-/* MMC /SDHI1 (CN7)
- *
- * I/O voltage : 1.8v
- *
- * Power voltage : 1.8v or 3.3v
- * J22 : select power voltage *1
- * 1-2 pin : 1.8v
- * 2-3 pin : 3.3v
- *
- * *1
- * Please change J22 depends the card to be used.
- * MMC's OCR field set to support either voltage for the card inserted.
- *
- * SW1 | SW33
- * | bit1 | bit2 | bit3 | bit4
- * -------------+------+------+------+-------
- * MMC0 OFF | OFF | X | ON | X (Use MMCIF)
- * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI)
- *
- */
-
-/*
- * SDHI2 (CN23)
- *
- * microSD card sloct
- *
- */
-
-/*
- * FSI - AK4642
- *
- * it needs amixer settings for playing
- *
- * amixer set "Headphone Enable" on
- */
-
-/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
- /*
- * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V
- * Since we cannot support both voltages, we support the default 1.8V
- */
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel_ro",
- .offset = MTDPART_OFS_APPEND,
- .size = 8 * 1024 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 8 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x20000000, /* CS0 shadow instead of regular CS0 */
- .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-/* SMSC */
-static struct resource smc911x_resources[] = {
- {
- .start = 0x14000000,
- .end = 0x16000000 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x02c0) /* IRQ6A */,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc911x_resources),
- .resource = smc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-/* MERAM */
-static struct sh_mobile_meram_info mackerel_meram_info = {
- .addr_mode = SH_MOBILE_MERAM_MODE1,
-};
-
-static struct resource meram_resources[] = {
- [0] = {
- .name = "regs",
- .start = 0xe8000000,
- .end = 0xe807ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "meram",
- .start = 0xe8080000,
- .end = 0xe81fffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device meram_device = {
- .name = "sh_mobile_meram",
- .id = 0,
- .num_resources = ARRAY_SIZE(meram_resources),
- .resource = meram_resources,
- .dev = {
- .platform_data = &mackerel_meram_info,
- },
-};
-
-/* LCDC and backlight */
-static struct fb_videomode mackerel_lcdc_modes[] = {
- {
- .name = "WVGA Panel",
- .xres = 800,
- .yres = 480,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 70,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0,
- },
-};
-
-static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
- .icb[0] = {
- .meram_size = 0x40,
- },
- .icb[1] = {
- .meram_size = 0x40,
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .meram_dev = &mackerel_meram_info,
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .lcd_modes = mackerel_lcdc_modes,
- .num_modes = ARRAY_SIZE(mackerel_lcdc_modes),
- .interface_type = RGB24,
- .clock_divider = 3,
- .flags = 0,
- .panel_cfg = {
- .width = 152,
- .height = 91,
- },
- .meram_cfg = &lcd_meram_cfg,
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe943fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct gpio_backlight_platform_data gpio_backlight_data = {
- .fbdev = &lcdc_device.dev,
- .gpio = 31,
- .def_value = 1,
- .name = "backlight",
-};
-
-static struct platform_device gpio_backlight_device = {
- .name = "gpio-backlight",
- .dev = {
- .platform_data = &gpio_backlight_data,
- },
-};
-
-/* HDMI */
-static struct sh_mobile_hdmi_info hdmi_info = {
- .flags = HDMI_SND_SRC_SPDIF,
-};
-
-static struct resource hdmi_resources[] = {
- [0] = {
- .name = "HDMI",
- .start = 0xe6be0000,
- .end = 0xe6be00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* There's also an HDMI interrupt on INTCS @ 0x18e0 */
- .start = evt2irq(0x17e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device hdmi_device = {
- .name = "sh-mobile-hdmi",
- .num_resources = ARRAY_SIZE(hdmi_resources),
- .resource = hdmi_resources,
- .id = -1,
- .dev = {
- .platform_data = &hdmi_info,
- },
-};
-
-static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
- .icb[0] = {
- .meram_size = 0x100,
- },
- .icb[1] = {
- .meram_size = 0x100,
- },
-};
-
-static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
- .meram_dev = &mackerel_meram_info,
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB24,
- .clock_divider = 1,
- .flags = LCDC_FLAGS_DWPOL,
- .meram_cfg = &hdmi_meram_cfg,
- .tx_dev = &hdmi_device,
- }
-};
-
-static struct resource hdmi_lcdc_resources[] = {
- [0] = {
- .name = "LCDC1",
- .start = 0xfe944000,
- .end = 0xfe947fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0x1780),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device hdmi_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(hdmi_lcdc_resources),
- .resource = hdmi_lcdc_resources,
- .id = 1,
- .dev = {
- .platform_data = &hdmi_lcdc_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct asoc_simple_card_info fsi2_hdmi_info = {
- .name = "HDMI",
- .card = "FSI2B-HDMI",
- .codec = "sh-mobile-hdmi",
- .platform = "sh_fsi2",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS,
- .cpu_dai = {
- .name = "fsib-dai",
- },
- .codec_dai = {
- .name = "sh_mobile_hdmi-hifi",
- },
-};
-
-static struct platform_device fsi_hdmi_device = {
- .name = "asoc-simple-card",
- .id = 1,
- .dev = {
- .platform_data = &fsi2_hdmi_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
- },
-};
-
-static void __init hdmi_init_pm_clock(void)
-{
- struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
- int ret;
- long rate;
-
- if (IS_ERR(hdmi_ick)) {
- ret = PTR_ERR(hdmi_ick);
- pr_err("Cannot get HDMI ICK: %d\n", ret);
- goto out;
- }
-
- ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
- if (ret < 0) {
- pr_err("Cannot set PLLC2 parent: %d, %d users\n",
- ret, sh7372_pllc2_clk.usecount);
- goto out;
- }
-
- pr_debug("PLLC2 initial frequency %lu\n",
- clk_get_rate(&sh7372_pllc2_clk));
-
- rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
- if (rate <= 0) {
- pr_err("Cannot get suitable rate: %ld\n", rate);
- ret = -EINVAL;
- goto out;
- }
-
- ret = clk_set_rate(&sh7372_pllc2_clk, rate);
- if (ret < 0) {
- pr_err("Cannot set rate %ld: %d\n", rate, ret);
- goto out;
- }
-
- pr_debug("PLLC2 set frequency %lu\n", rate);
-
- ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
- if (ret < 0)
- pr_err("Cannot set HDMI parent: %d\n", ret);
-
-out:
- if (!IS_ERR(hdmi_ick))
- clk_put(hdmi_ick);
-}
-
-/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
- *
- * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
- * but on this particular board IRQ7 is already used by
- * the touch screen. This leaves us with software polling.
- */
-#define USBHS0_POLL_INTERVAL (HZ * 5)
-
-struct usbhs_private {
- void __iomem *usbphyaddr;
- void __iomem *usbcrcaddr;
- struct renesas_usbhs_platform_info info;
- struct delayed_work work;
- struct platform_device *pdev;
-};
-
-#define usbhs_get_priv(pdev) \
- container_of(renesas_usbhs_get_info(pdev), \
- struct usbhs_private, info)
-
-#define usbhs_is_connected(priv) \
- (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
- return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* init phy */
- __raw_writew(0x8a0a, priv->usbcrcaddr);
-
- return 0;
-}
-
-static int usbhs0_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static void usbhs0_work_function(struct work_struct *work)
-{
- struct usbhs_private *priv = container_of(work, struct usbhs_private,
- work.work);
-
- renesas_usbhs_call_notify_hotplug(priv->pdev);
- schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
-}
-
-static int usbhs0_hardware_init(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- priv->pdev = pdev;
- INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
- schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
- return 0;
-}
-
-static int usbhs0_hardware_exit(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- cancel_delayed_work_sync(&priv->work);
-
- return 0;
-}
-
-static struct usbhs_private usbhs0_private = {
- .usbcrcaddr = IOMEM(0xe605810c), /* USBCR2 */
- .info = {
- .platform_callback = {
- .hardware_init = usbhs0_hardware_init,
- .hardware_exit = usbhs0_hardware_exit,
- .phy_reset = usbhs_phy_reset,
- .get_id = usbhs0_get_id,
- .get_vbus = usbhs_get_vbus,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .d0_tx_id = SHDMA_SLAVE_USB0_TX,
- .d1_rx_id = SHDMA_SLAVE_USB0_RX,
- },
- },
-};
-
-static struct resource usbhs0_resources[] = {
- [0] = {
- .name = "USBHS0",
- .start = 0xe6890000,
- .end = 0xe68900e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbhs0_device = {
- .name = "renesas_usbhs",
- .id = 0,
- .dev = {
- .platform_data = &usbhs0_private.info,
- },
- .num_resources = ARRAY_SIZE(usbhs0_resources),
- .resource = usbhs0_resources,
-};
-
-/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
- *
- * Use J30 to select between Host and Function. This setting
- * can however not be detected by software. Hotplug of USBHS1
- * is provided via IRQ8.
- *
- * Current USB1 works as "USB Host".
- * - set J30 "short"
- *
- * If you want to use it as "USB gadget",
- * - J30 "open"
- * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
- * - add .get_vbus = usbhs_get_vbus in usbhs1_private
- * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
- */
-#define IRQ8 evt2irq(0x0300)
-#define USB_PHY_MODE (1 << 4)
-#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
-#define USB_PHY_ON (1 << 1)
-#define USB_PHY_OFF (1 << 0)
-#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
-
-static irqreturn_t usbhs1_interrupt(int irq, void *data)
-{
- struct platform_device *pdev = data;
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- dev_dbg(&pdev->dev, "%s\n", __func__);
-
- renesas_usbhs_call_notify_hotplug(pdev);
-
- /* clear status */
- __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
- priv->usbphyaddr);
-
- return IRQ_HANDLED;
-}
-
-static int usbhs1_hardware_init(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
- int ret;
-
- /* clear interrupt status */
- __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
- ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
- dev_name(&pdev->dev), pdev);
- if (ret) {
- dev_err(&pdev->dev, "request_irq err\n");
- return ret;
- }
-
- /* enable USB phy interrupt */
- __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
-
- return 0;
-}
-
-static int usbhs1_hardware_exit(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* clear interrupt status */
- __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
- free_irq(IRQ8, pdev);
-
- return 0;
-}
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
- return USBHS_HOST;
-}
-
-static u32 usbhs1_pipe_cfg[] = {
- USB_ENDPOINT_XFER_CONTROL,
- USB_ENDPOINT_XFER_ISOC,
- USB_ENDPOINT_XFER_ISOC,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_INT,
- USB_ENDPOINT_XFER_INT,
- USB_ENDPOINT_XFER_INT,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs1_private = {
- .usbphyaddr = IOMEM(0xe60581e2), /* USBPHY1INTAP */
- .usbcrcaddr = IOMEM(0xe6058130), /* USBCR4 */
- .info = {
- .platform_callback = {
- .hardware_init = usbhs1_hardware_init,
- .hardware_exit = usbhs1_hardware_exit,
- .get_id = usbhs1_get_id,
- .phy_reset = usbhs_phy_reset,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .has_otg = 1,
- .pipe_type = usbhs1_pipe_cfg,
- .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg),
- .d0_tx_id = SHDMA_SLAVE_USB1_TX,
- .d1_rx_id = SHDMA_SLAVE_USB1_RX,
- },
- },
-};
-
-static struct resource usbhs1_resources[] = {
- [0] = {
- .name = "USBHS1",
- .start = 0xe68b0000,
- .end = 0xe68b00e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbhs1_device = {
- .name = "renesas_usbhs",
- .id = 1,
- .dev = {
- .platform_data = &usbhs1_private.info,
- .dma_mask = &usbhs1_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usbhs1_resources),
- .resource = usbhs1_resources,
-};
-
-/* LED */
-static struct gpio_led mackerel_leds[] = {
- {
- .name = "led0",
- .gpio = 0,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "led1",
- .gpio = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "led2",
- .gpio = 2,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "led3",
- .gpio = 159,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static struct gpio_led_platform_data mackerel_leds_pdata = {
- .leds = mackerel_leds,
- .num_leds = ARRAY_SIZE(mackerel_leds),
-};
-
-static struct platform_device leds_device = {
- .name = "leds-gpio",
- .id = 0,
- .dev = {
- .platform_data = &mackerel_leds_pdata,
- },
-};
-
-/* FSI */
-#define IRQ_FSI evt2irq(0x1840)
-static struct sh_fsi_platform_info fsi_info = {
- .port_a = {
- .tx_id = SHDMA_SLAVE_FSIA_TX,
- .rx_id = SHDMA_SLAVE_FSIA_RX,
- },
- .port_b = {
- .flags = SH_FSI_CLK_CPG |
- SH_FSI_FMT_SPDIF,
- }
-};
-
-static struct resource fsi_resources[] = {
- [0] = {
- /* we need 0xFE1F0000 to access DMA
- * instead of 0xFE3C0000 */
- .name = "FSI",
- .start = 0xFE1F0000,
- .end = 0xFE1F0400 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FSI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi2",
- .id = -1,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
- .dev = {
- .platform_data = &fsi_info,
- },
-};
-
-static struct asoc_simple_card_info fsi2_ak4643_info = {
- .name = "AK4643",
- .card = "FSI2A-AK4643",
- .codec = "ak4642-codec.0-0013",
- .platform = "sh_fsi2",
- .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
- .cpu_dai = {
- .name = "fsia-dai",
- },
- .codec_dai = {
- .name = "ak4642-hifi",
- .sysclk = 11289600,
- },
-};
-
-static struct platform_device fsi_ak4643_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi2_ak4643_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &fsi_ak4643_device.dev.coherent_dma_mask,
- },
-};
-
-/* FLCTL */
-static struct mtd_partition nand_partition_info[] = {
- {
- .name = "system",
- .offset = 0,
- .size = 128 * 1024 * 1024,
- },
- {
- .name = "userdata",
- .offset = MTDPART_OFS_APPEND,
- .size = 256 * 1024 * 1024,
- },
- {
- .name = "cache",
- .offset = MTDPART_OFS_APPEND,
- .size = 128 * 1024 * 1024,
- },
-};
-
-static struct resource nand_flash_resources[] = {
- [0] = {
- .start = 0xe6a30000,
- .end = 0xe6a3009b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x0d80), /* flstei: status error irq */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
- .parts = nand_partition_info,
- .nr_parts = ARRAY_SIZE(nand_partition_info),
- .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET
- | SHBUSSEL | SEL_16BIT | SNAND_E,
- .use_holden = 1,
-};
-
-static struct platform_device nand_flash_device = {
- .name = "sh_flctl",
- .resource = nand_flash_resources,
- .num_resources = ARRAY_SIZE(nand_flash_resources),
- .dev = {
- .platform_data = &nand_flash_data,
- },
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
- .tmio_flags = TMIO_MMC_USE_GPIO_CD,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
- .cd_gpio = 172,
-};
-
-static struct resource sdhi0_resources[] = {
- {
- .name = "SDHI0",
- .start = 0xe6850000,
- .end = 0xe68500ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi0_info,
- },
-};
-
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-/* SDHI1 */
-
-/* GPIO 41 can trigger IRQ8, but it is used by USBHS1, we have to poll */
-static struct sh_mobile_sdhi_info sdhi1_info = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_NEEDS_POLL,
- .cd_gpio = 41,
-};
-
-static struct resource sdhi1_resources[] = {
- {
- .name = "SDHI1",
- .start = 0xe6860000,
- .end = 0xe68600ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
- .flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi1_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi1_resources),
- .resource = sdhi1_resources,
- .id = 1,
- .dev = {
- .platform_data = &sdhi1_info,
- },
-};
-#endif
-
-/* SDHI2 */
-
-/*
- * The card detect pin of the top SD/MMC slot (CN23) is active low and is
- * connected to GPIO SCIFB_SCK of SH7372 (GPIO 162).
- */
-static struct sh_mobile_sdhi_info sdhi2_info = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_NEEDS_POLL,
- .cd_gpio = 162,
-};
-
-static struct resource sdhi2_resources[] = {
- {
- .name = "SDHI2",
- .start = 0xe6870000,
- .end = 0xe68700ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
- .flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi2_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi2_resources),
- .resource = sdhi2_resources,
- .id = 2,
- .dev = {
- .platform_data = &sdhi2_info,
- },
-};
-
-/* SH_MMCIF */
-#if IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .name = "MMCIF",
- .start = 0xE6BD0000,
- .end = 0xE6BD00FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* MMC ERR */
- .start = evt2irq(0x1ac0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* MMC NOR */
- .start = evt2irq(0x1ae0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0,
- .caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NEEDS_POLL,
- .use_cd_gpio = true,
- /* card detect pin for SD/MMC slot (CN7) */
- .cd_gpio = 41,
- .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-#endif
-
-static int mackerel_camera_add(struct soc_camera_device *icd);
-static void mackerel_camera_del(struct soc_camera_device *icd);
-
-static int camera_set_capture(struct soc_camera_platform_info *info,
- int enable)
-{
- return 0; /* camera sensor always enabled */
-}
-
-static struct soc_camera_platform_info camera_info = {
- .format_name = "UYVY",
- .format_depth = 16,
- .format = {
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .colorspace = V4L2_COLORSPACE_SMPTE170M,
- .field = V4L2_FIELD_NONE,
- .width = 640,
- .height = 480,
- },
- .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
- V4L2_MBUS_DATA_ACTIVE_HIGH,
- .mbus_type = V4L2_MBUS_PARALLEL,
- .set_capture = camera_set_capture,
-};
-
-static struct soc_camera_link camera_link = {
- .bus_id = 0,
- .add_device = mackerel_camera_add,
- .del_device = mackerel_camera_del,
- .module_name = "soc_camera_platform",
- .priv = &camera_info,
-};
-
-static struct platform_device *camera_device;
-
-static void mackerel_camera_release(struct device *dev)
-{
- soc_camera_platform_release(&camera_device);
-}
-
-static int mackerel_camera_add(struct soc_camera_device *icd)
-{
- return soc_camera_platform_add(icd, &camera_device, &camera_link,
- mackerel_camera_release, 0);
-}
-
-static void mackerel_camera_del(struct soc_camera_device *icd)
-{
- soc_camera_platform_del(icd, camera_device, &camera_link);
-}
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
- .flags = SH_CEU_FLAG_USE_8BIT_BUS,
- .max_width = 8188,
- .max_height = 8188,
-};
-
-static struct resource ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device ceu_device = {
- .name = "sh_mobile_ceu",
- .id = 0, /* "ceu0" clock */
- .num_resources = ARRAY_SIZE(ceu_resources),
- .resource = ceu_resources,
- .dev = {
- .platform_data = &sh_mobile_ceu_info,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct platform_device mackerel_camera = {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .platform_data = &camera_link,
- },
-};
-
-static struct platform_device *mackerel_devices[] __initdata = {
- &nor_flash_device,
- &smc911x_device,
- &lcdc_device,
- &gpio_backlight_device,
- &usbhs0_device,
- &usbhs1_device,
- &leds_device,
- &fsi_device,
- &fsi_ak4643_device,
- &fsi_hdmi_device,
- &nand_flash_device,
- &sdhi0_device,
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
- &sdhi1_device,
-#else
- &sh_mmcif_device,
-#endif
- &sdhi2_device,
- &ceu_device,
- &mackerel_camera,
- &hdmi_device,
- &hdmi_lcdc_device,
- &meram_device,
-};
-
-/* Keypad Initialization */
-#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
-{ \
- .type = ev_type, \
- .code = ev_code, \
- .active_low = act_low, \
-}
-
-#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
-
-static struct tca6416_button mackerel_gpio_keys[] = {
- KEYPAD_BUTTON_LOW(KEY_HOME),
- KEYPAD_BUTTON_LOW(KEY_MENU),
- KEYPAD_BUTTON_LOW(KEY_BACK),
- KEYPAD_BUTTON_LOW(KEY_POWER),
-};
-
-static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
- .buttons = mackerel_gpio_keys,
- .nbuttons = ARRAY_SIZE(mackerel_gpio_keys),
- .rep = 1,
- .use_polling = 0,
- .pinmask = 0x000F,
-};
-
-/* I2C */
-#define IRQ7 evt2irq(0x02e0)
-#define IRQ9 evt2irq(0x0320)
-
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("ak4643", 0x13),
- },
- /* Keypad */
- {
- I2C_BOARD_INFO("tca6408-keys", 0x20),
- .platform_data = &mackerel_tca6416_keys_info,
- .irq = IRQ9,
- },
- /* Touchscreen */
- {
- I2C_BOARD_INFO("st1232-ts", 0x55),
- .irq = IRQ7,
- },
-};
-
-#define IRQ21 evt2irq(0x32a0)
-
-static struct i2c_board_info i2c1_devices[] = {
- /* Accelerometer */
- {
- I2C_BOARD_INFO("adxl34x", 0x53),
- .irq = IRQ21,
- },
-};
-
-static unsigned long pin_pulldown_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0),
-};
-
-static const struct pinctrl_map mackerel_pinctrl_map[] = {
- /* ADXL34X */
- PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372",
- "intc_irq21", "intc"),
- /* CEU */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_data_0_7", "ceu"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_clk_0", "ceu"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_sync", "ceu"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_field", "ceu"),
- /* FLCTL */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
- "flctl_data", "flctl"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
- "flctl_ce0", "flctl"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
- "flctl_ctrl", "flctl"),
- /* FSIA (AK4643) */
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
- "fsia_sclk_in", "fsia"),
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
- "fsia_data_in", "fsia"),
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
- "fsia_data_out", "fsia"),
- /* FSIB (HDMI) */
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
- "fsib_mclk_in", "fsib"),
- /* HDMI */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
- "hdmi", "hdmi"),
- /* LCDC */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
- "lcd_data24", "lcd"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
- "lcd_sync", "lcd"),
- /* SCIFA0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
- "scifa0_data", "scifa0"),
- /* SCIFA2 (GT-720F GPS module) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372",
- "scifa2_data", "scifa2"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "sdhi0_wp", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "intc_irq26_1", "intc"),
- /* SDHI1 */
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
- "sdhi1_data4", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
- "sdhi1_ctrl", "sdhi1"),
-#else
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
- "mmc0_ctrl_0", "mmc0"),
-#endif
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
- "sdhi2_ctrl", "sdhi2"),
- /* SMSC911X */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
- "bsc_cs5a", "bsc"),
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
- "intc_irq6_0", "intc"),
- /* ST1232 */
- PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372",
- "intc_irq7_0", "intc"),
- /* TCA6416 */
- PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372",
- "intc_irq9_0", "intc"),
- /* USBHS0 */
- PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
- "usb0_vbus", "usb0"),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
- "usb0_vbus", pin_pulldown_conf),
- /* USBHS1 */
- PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
- "usb1_vbus", "usb1"),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
- "usb1_vbus", pin_pulldown_conf),
- PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
- "usb1_otg_id_0", "usb1"),
-};
-
-#define GPIO_PORT9CR IOMEM(0xE6051009)
-#define GPIO_PORT10CR IOMEM(0xE605100A)
-#define SRCR4 IOMEM(0xe61580bc)
-#define USCCR1 IOMEM(0xE6058144)
-static void __init mackerel_init(void)
-{
- static struct pm_domain_device domain_devices[] __initdata = {
- { "A4LC", &lcdc_device, },
- { "A4LC", &hdmi_lcdc_device, },
- { "A4LC", &meram_device, },
- { "A4MP", &fsi_device, },
- { "A3SP", &usbhs0_device, },
- { "A3SP", &usbhs1_device, },
- { "A3SP", &nand_flash_device, },
- { "A3SP", &sdhi0_device, },
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
- { "A3SP", &sdhi1_device, },
-#else
- { "A3SP", &sh_mmcif_device, },
-#endif
- { "A3SP", &sdhi2_device, },
- { "A4R", &ceu_device, },
- };
- u32 srcr4;
- struct clk *clk;
-
- regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
- ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
- regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
- regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* External clock source */
- clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-
- pinctrl_register_mappings(mackerel_pinctrl_map,
- ARRAY_SIZE(mackerel_pinctrl_map));
- sh7372_pinmux_init();
-
- gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-
- /* FSI2 port A (ak4643) */
- gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
-
- gpio_request(9, NULL);
- gpio_request(10, NULL);
- gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
- gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
-
- intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
-
- /* FSI2 port B (HDMI) */
- __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
- /* set SPU2 clock to 119.6 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 119600000));
- clk_put(clk);
- }
-
- /* Keypad */
- irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
-
- /* Touchscreen */
- irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
-
- /* Accelerometer */
- irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
-
- /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
- srcr4 = __raw_readl(SRCR4);
- __raw_writel(srcr4 | (1 << 13), SRCR4);
- udelay(50);
- __raw_writel(srcr4 & ~(1 << 13), SRCR4);
-
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
- i2c_register_board_info(1, i2c1_devices,
- ARRAY_SIZE(i2c1_devices));
-
- sh7372_add_standard_devices();
-
- platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
-
- rmobile_add_devices_to_domains(domain_devices,
- ARRAY_SIZE(domain_devices));
-
- hdmi_init_pm_clock();
- sh7372_pm_init();
- pm_clk_add(&fsi_device.dev, "spu2");
- pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
-}
-
-static const char *mackerel_boards_compat_dt[] __initdata = {
- "renesas,mackerel",
- NULL,
-};
-
-DT_MACHINE_START(MACKEREL_DT, "mackerel")
- .map_io = sh7372_map_io,
- .init_early = sh7372_add_early_devices,
- .init_irq = sh7372_init_irq,
- .handle_irq = shmobile_handle_irq_intc,
- .init_machine = mackerel_init,
- .init_late = sh7372_pm_init_late,
- .init_time = sh7372_earlytimer_init,
- .dt_compat = mackerel_boards_compat_dt,
-MACHINE_END
+++ /dev/null
-/*
- * r8a73a4 clock framework support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "common.h"
-#include "clock.h"
-
-#define CPG_BASE 0xe6150000
-#define CPG_LEN 0x270
-
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR4 0xe6150140
-#define SMSTPCR5 0xe6150144
-
-#define FRQCRA 0xE6150000
-#define FRQCRB 0xE6150004
-#define FRQCRC 0xE61500E0
-#define VCLKCR1 0xE6150008
-#define VCLKCR2 0xE615000C
-#define VCLKCR3 0xE615001C
-#define VCLKCR4 0xE6150014
-#define VCLKCR5 0xE6150034
-#define ZBCKCR 0xE6150010
-#define SD0CKCR 0xE6150074
-#define SD1CKCR 0xE6150078
-#define SD2CKCR 0xE615007C
-#define MMC0CKCR 0xE6150240
-#define MMC1CKCR 0xE6150244
-#define FSIACKCR 0xE6150018
-#define FSIBCKCR 0xE6150090
-#define MPCKCR 0xe6150080
-#define SPUVCKCR 0xE6150094
-#define HSICKCR 0xE615026C
-#define M4CKCR 0xE6150098
-#define PLLECR 0xE61500D0
-#define PLL0CR 0xE61500D8
-#define PLL1CR 0xE6150028
-#define PLL2CR 0xE615002C
-#define PLL2SCR 0xE61501F4
-#define PLL2HCR 0xE61501E4
-#define CKSCR 0xE61500C0
-
-#define CPG_MAP(o) ((o - CPG_BASE) + cpg_mapping.base)
-
-static struct clk_mapping cpg_mapping = {
- .phys = CPG_BASE,
- .len = CPG_LEN,
-};
-
-static struct clk extalr_clk = {
- .rate = 32768,
- .mapping = &cpg_mapping,
-};
-
-static struct clk extal1_clk = {
- .rate = 26000000,
- .mapping = &cpg_mapping,
-};
-
-static struct clk extal2_clk = {
- .rate = 48000000,
- .mapping = &cpg_mapping,
-};
-
-static struct sh_clk_ops followparent_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct clk main_clk = {
- /* .parent will be set r8a73a4_clock_init */
- .ops = &followparent_clk_ops,
-};
-
-SH_CLK_RATIO(div2, 1, 2);
-SH_CLK_RATIO(div4, 1, 4);
-
-SH_FIXED_RATIO_CLK(main_div2_clk, main_clk, div2);
-SH_FIXED_RATIO_CLK(extal1_div2_clk, extal1_clk, div2);
-SH_FIXED_RATIO_CLK(extal2_div2_clk, extal2_clk, div2);
-SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_clk, div4);
-
-/* External FSIACK/FSIBCK clock */
-static struct clk fsiack_clk = {
-};
-
-static struct clk fsibck_clk = {
-};
-
-/*
- * PLL clocks
- */
-static struct clk *pll_parent_main[] = {
- [0] = &main_clk,
- [1] = &main_div2_clk
-};
-
-static struct clk *pll_parent_main_extal[8] = {
- [0] = &main_div2_clk,
- [1] = &extal2_div2_clk,
- [3] = &extal2_div4_clk,
- [4] = &main_clk,
- [5] = &extal2_clk,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (ioread32(CPG_MAP(PLLECR)) & (1 << clk->enable_bit))
- mult = (((ioread32(clk->mapped_reg) >> 24) & 0x7f) + 1);
-
- return clk->parent->rate * mult;
-}
-
-static int pll_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 val;
- int i, ret;
-
- if (!clk->parent_table || !clk->parent_num)
- return -EINVAL;
-
- /* Search the parent */
- for (i = 0; i < clk->parent_num; i++)
- if (clk->parent_table[i] == parent)
- break;
-
- if (i == clk->parent_num)
- return -ENODEV;
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- val = ioread32(clk->mapped_reg) &
- ~(((1 << clk->src_width) - 1) << clk->src_shift);
-
- iowrite32(val | i << clk->src_shift, clk->mapped_reg);
-
- return 0;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
- .set_parent = pll_set_parent,
-};
-
-#define PLL_CLOCK(name, p, pt, w, s, reg, e) \
- static struct clk name = { \
- .ops = &pll_clk_ops, \
- .flags = CLK_ENABLE_ON_INIT, \
- .parent = p, \
- .parent_table = pt, \
- .parent_num = ARRAY_SIZE(pt), \
- .src_width = w, \
- .src_shift = s, \
- .enable_reg = (void __iomem *)reg, \
- .enable_bit = e, \
- .mapping = &cpg_mapping, \
- }
-
-PLL_CLOCK(pll0_clk, &main_clk, pll_parent_main, 1, 20, PLL0CR, 0);
-PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1);
-PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2);
-PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
-PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5);
-
-SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2);
-
-static atomic_t frqcr_lock;
-
-/* Several clocks need to access FRQCRB, have to lock */
-static bool frqcr_kick_check(struct clk *clk)
-{
- return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
-}
-
-static int frqcr_kick_do(struct clk *clk)
-{
- int i;
-
- /* set KICK bit in FRQCRB to update hardware setting, check success */
- iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
- for (i = 1000; i; i--)
- if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
- cpu_relax();
- else
- return 0;
-
- return -ETIMEDOUT;
-}
-
-static int zclk_set_rate(struct clk *clk, unsigned long rate)
-{
- void __iomem *frqcrc;
- int ret;
- unsigned long step, p_rate;
- u32 val;
-
- if (!clk->parent || !__clk_get(clk->parent))
- return -ENODEV;
-
- if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
- ret = -EBUSY;
- goto done;
- }
-
- /*
- * Users are supposed to first call clk_set_rate() only with
- * clk_round_rate() results. So, we don't fix wrong rates here, but
- * guard against them anyway
- */
-
- p_rate = clk_get_rate(clk->parent);
- if (rate == p_rate) {
- val = 0;
- } else {
- step = DIV_ROUND_CLOSEST(p_rate, 32);
-
- if (rate > p_rate || rate < step) {
- ret = -EINVAL;
- goto done;
- }
-
- val = 32 - rate / step;
- }
-
- frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
-
- iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
- (val << clk->enable_bit), frqcrc);
-
- ret = frqcr_kick_do(clk);
-
-done:
- atomic_dec(&frqcr_lock);
- __clk_put(clk->parent);
- return ret;
-}
-
-static long zclk_round_rate(struct clk *clk, unsigned long rate)
-{
- /*
- * theoretical rate = parent rate * multiplier / 32,
- * where 1 <= multiplier <= 32. Therefore we should do
- * multiplier = rate * 32 / parent rate
- * rounded rate = parent rate * multiplier / 32.
- * However, multiplication before division won't fit in 32 bits, so
- * we sacrifice some precision by first dividing and then multiplying.
- * To find the nearest divisor we calculate both and pick up the best
- * one. This avoids 64-bit arithmetics.
- */
- unsigned long step, mul_min, mul_max, rate_min, rate_max;
-
- rate_max = clk_get_rate(clk->parent);
-
- /* output freq <= parent */
- if (rate >= rate_max)
- return rate_max;
-
- step = DIV_ROUND_CLOSEST(rate_max, 32);
- /* output freq >= parent / 32 */
- if (step >= rate)
- return step;
-
- mul_min = rate / step;
- mul_max = DIV_ROUND_UP(rate, step);
- rate_min = step * mul_min;
- if (mul_max == mul_min)
- return rate_min;
-
- rate_max = step * mul_max;
-
- if (rate_max - rate < rate - rate_min)
- return rate_max;
-
- return rate_min;
-}
-
-static unsigned long zclk_recalc(struct clk *clk)
-{
- void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
- unsigned int max = clk->div_mask + 1;
- unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
- clk->div_mask);
-
- return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
- (max - val);
-}
-
-static struct sh_clk_ops zclk_ops = {
- .recalc = zclk_recalc,
- .set_rate = zclk_set_rate,
- .round_rate = zclk_round_rate,
-};
-
-static struct clk z_clk = {
- .parent = &pll0_clk,
- .div_mask = 0x1f,
- .enable_bit = 8,
- /* We'll need to access FRQCRB and FRQCRC */
- .enable_reg = (void __iomem *)FRQCRB,
- .ops = &zclk_ops,
-};
-
-/*
- * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
- * switching is only available in auto-DVFS mode
- */
-SH_FIXED_RATIO_CLK(pll0_div2_clk, pll0_clk, div2);
-
-static struct clk z2_clk = {
- .parent = &pll0_div2_clk,
- .div_mask = 0x1f,
- .enable_bit = 0,
- /* We'll need to access FRQCRB and FRQCRC */
- .enable_reg = (void __iomem *)FRQCRB,
- .ops = &zclk_ops,
-};
-
-static struct clk *main_clks[] = {
- &extalr_clk,
- &extal1_clk,
- &extal1_div2_clk,
- &extal2_clk,
- &extal2_div2_clk,
- &extal2_div4_clk,
- &main_clk,
- &main_div2_clk,
- &fsiack_clk,
- &fsibck_clk,
- &pll0_clk,
- &pll1_clk,
- &pll1_div2_clk,
- &pll2_clk,
- &pll2s_clk,
- &pll2h_clk,
- &z_clk,
- &pll0_div2_clk,
- &z2_clk,
-};
-
-/* DIV4 */
-static void div4_kick(struct clk *clk)
-{
- if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
- frqcr_kick_do(clk);
- atomic_dec(&frqcr_lock);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
- .kick = div4_kick,
-};
-
-enum {
- DIV4_I, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
- DIV4_ZX, DIV4_ZS, DIV4_HP,
- DIV4_NR };
-
-static struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 20, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_M3] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 8, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_M1] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 4, 0x1dff, 0),
- [DIV4_M2] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 0, 0x1dff, 0),
- [DIV4_ZX] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 12, 0x0dff, 0),
- [DIV4_ZS] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 8, 0x0dff, 0),
- [DIV4_HP] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 4, 0x0dff, 0),
-};
-
-enum {
- DIV6_ZB,
- DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
- DIV6_MMC0, DIV6_MMC1,
- DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VCK4, DIV6_VCK5,
- DIV6_FSIA, DIV6_FSIB,
- DIV6_MP, DIV6_M4, DIV6_HSI, DIV6_SPUV,
- DIV6_NR };
-
-static struct clk *div6_parents[8] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [3] = &extal2_clk,
- [4] = &main_div2_clk,
- [6] = &extalr_clk,
-};
-
-static struct clk *fsia_parents[4] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [2] = &fsiack_clk,
-};
-
-static struct clk *fsib_parents[4] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [2] = &fsibck_clk,
-};
-
-static struct clk *mp_parents[4] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [2] = &extal2_clk,
- [3] = &extal2_clk,
-};
-
-static struct clk *m4_parents[2] = {
- [0] = &pll2s_clk,
-};
-
-static struct clk *hsi_parents[4] = {
- [0] = &pll2h_clk,
- [1] = &pll1_div2_clk,
- [3] = &pll2s_clk,
-};
-
-/*** FIXME ***
- * SH_CLK_DIV6_EXT() macro doesn't care .mapping
- * but, it is necessary on R-Car (= ioremap() base CPG)
- * The difference between
- * SH_CLK_DIV6_EXT() <--> SH_CLK_MAP_DIV6_EXT()
- * is only .mapping
- */
-#define SH_CLK_MAP_DIV6_EXT(_reg, _flags, _parents, \
- _num_parents, _src_shift, _src_width) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
- .div_mask = SH_CLK_DIV6_MSK, \
- .parent_table = _parents, \
- .parent_num = _num_parents, \
- .src_shift = _src_shift, \
- .src_width = _src_width, \
- .mapping = &cpg_mapping, \
-}
-
-static struct clk div6_clks[DIV6_NR] = {
- [DIV6_ZB] = SH_CLK_MAP_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
- div6_parents, 2, 7, 1),
- [DIV6_SDHI0] = SH_CLK_MAP_DIV6_EXT(SD0CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_SDHI1] = SH_CLK_MAP_DIV6_EXT(SD1CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_SDHI2] = SH_CLK_MAP_DIV6_EXT(SD2CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_MMC0] = SH_CLK_MAP_DIV6_EXT(MMC0CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_MMC1] = SH_CLK_MAP_DIV6_EXT(MMC1CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_VCK1] = SH_CLK_MAP_DIV6_EXT(VCLKCR1, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK2] = SH_CLK_MAP_DIV6_EXT(VCLKCR2, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK3] = SH_CLK_MAP_DIV6_EXT(VCLKCR3, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK4] = SH_CLK_MAP_DIV6_EXT(VCLKCR4, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK5] = SH_CLK_MAP_DIV6_EXT(VCLKCR5, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_FSIA] = SH_CLK_MAP_DIV6_EXT(FSIACKCR, 0,
- fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2),
- [DIV6_FSIB] = SH_CLK_MAP_DIV6_EXT(FSIBCKCR, 0,
- fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
- [DIV6_MP] = SH_CLK_MAP_DIV6_EXT(MPCKCR, 0, /* it needs bit[9-11] control */
- mp_parents, ARRAY_SIZE(mp_parents), 6, 2),
- /* pll2s will be selected always for M4 */
- [DIV6_M4] = SH_CLK_MAP_DIV6_EXT(M4CKCR, 0, /* it needs bit[9] control */
- m4_parents, ARRAY_SIZE(m4_parents), 6, 1),
- [DIV6_HSI] = SH_CLK_MAP_DIV6_EXT(HSICKCR, 0, /* it needs bit[9] control */
- hsi_parents, ARRAY_SIZE(hsi_parents), 6, 2),
- [DIV6_SPUV] = SH_CLK_MAP_DIV6_EXT(SPUVCKCR, 0,
- mp_parents, ARRAY_SIZE(mp_parents), 6, 2),
-};
-
-/* MSTP */
-enum {
- MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
- MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
- MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
- MSTP411, MSTP410, MSTP409,
- MSTP522, MSTP515,
- MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 4, 0), /* SCIFA0 */
- [MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 3, 0), /* SCIFA1 */
- [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 6, 0), /* SCIFB0 */
- [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */
- [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */
- [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */
- [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC */
- [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */
- [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
- [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
- [MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
- [MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
- [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
- [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 16, 0), /* IIC6 */
- [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */
- [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */
- [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
- [MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */
- [MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
- [MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
- [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
- [MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR5, 15, 0), /* IIC8 */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clock */
- CLKDEV_CON_ID("extal1", &extal1_clk),
- CLKDEV_CON_ID("extal1_div2", &extal1_div2_clk),
- CLKDEV_CON_ID("extal2", &extal2_clk),
- CLKDEV_CON_ID("extal2_div2", &extal2_div2_clk),
- CLKDEV_CON_ID("extal2_div4", &extal2_div4_clk),
- CLKDEV_CON_ID("fsiack", &fsiack_clk),
- CLKDEV_CON_ID("fsibck", &fsibck_clk),
-
- /* pll clock */
- CLKDEV_CON_ID("pll1", &pll1_clk),
- CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk),
- CLKDEV_CON_ID("pll2", &pll2_clk),
- CLKDEV_CON_ID("pll2s", &pll2s_clk),
- CLKDEV_CON_ID("pll2h", &pll2h_clk),
-
- /* CPU clock */
- CLKDEV_DEV_ID("cpu0", &z_clk),
-
- /* DIV6 */
- CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]),
- CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]),
- CLKDEV_CON_ID("vck2", &div6_clks[DIV6_VCK2]),
- CLKDEV_CON_ID("vck3", &div6_clks[DIV6_VCK3]),
- CLKDEV_CON_ID("vck4", &div6_clks[DIV6_VCK4]),
- CLKDEV_CON_ID("vck5", &div6_clks[DIV6_VCK5]),
- CLKDEV_CON_ID("fsia", &div6_clks[DIV6_FSIA]),
- CLKDEV_CON_ID("fsib", &div6_clks[DIV6_FSIB]),
- CLKDEV_CON_ID("mp", &div6_clks[DIV6_MP]),
- CLKDEV_CON_ID("m4", &div6_clks[DIV6_M4]),
- CLKDEV_CON_ID("hsi", &div6_clks[DIV6_HSI]),
- CLKDEV_CON_ID("spuv", &div6_clks[DIV6_SPUV]),
-
- /* MSTP */
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("e6c20000.serial", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
- CLKDEV_DEV_ID("e6ce0000.serial", &mstp_clks[MSTP216]),
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
- CLKDEV_DEV_ID("e6cf0000.serial", &mstp_clks[MSTP217]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
- CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
- CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
- CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
- CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
- CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
- CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
- CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
- CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
- CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.1", &mstp_clks[MSTP329]),
- CLKDEV_ICK_ID("fck", "e6130000.timer", &mstp_clks[MSTP329]),
- CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
- CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
- CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
- CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
-
- /* for DT */
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
-};
-
-void __init r8a73a4_clock_init(void)
-{
- void __iomem *reg;
- int k, ret = 0;
- u32 ckscr;
-
- atomic_set(&frqcr_lock, -1);
-
- reg = ioremap_nocache(CKSCR, PAGE_SIZE);
- BUG_ON(!reg);
- ckscr = ioread32(reg);
- iounmap(reg);
-
- switch ((ckscr >> 28) & 0x3) {
- case 0:
- main_clk.parent = &extal1_clk;
- break;
- case 1:
- main_clk.parent = &extal1_div2_clk;
- break;
- case 2:
- main_clk.parent = &extal2_clk;
- break;
- case 3:
- main_clk.parent = &extal2_div2_clk;
- break;
- }
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup r8a73a4 clocks\n");
-}
+++ /dev/null
-/*
- * SH7372 clock framework support
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-
-/* SH7372 registers */
-#define FRQCRA IOMEM(0xe6150000)
-#define FRQCRB IOMEM(0xe6150004)
-#define FRQCRC IOMEM(0xe61500e0)
-#define FRQCRD IOMEM(0xe61500e4)
-#define VCLKCR1 IOMEM(0xe6150008)
-#define VCLKCR2 IOMEM(0xe615000c)
-#define VCLKCR3 IOMEM(0xe615001c)
-#define FMSICKCR IOMEM(0xe6150010)
-#define FMSOCKCR IOMEM(0xe6150014)
-#define FSIACKCR IOMEM(0xe6150018)
-#define FSIBCKCR IOMEM(0xe6150090)
-#define SUBCKCR IOMEM(0xe6150080)
-#define SPUCKCR IOMEM(0xe6150084)
-#define VOUCKCR IOMEM(0xe6150088)
-#define HDMICKCR IOMEM(0xe6150094)
-#define DSITCKCR IOMEM(0xe6150060)
-#define DSI0PCKCR IOMEM(0xe6150064)
-#define DSI1PCKCR IOMEM(0xe6150098)
-#define PLLC01CR IOMEM(0xe6150028)
-#define PLLC2CR IOMEM(0xe615002c)
-#define RMSTPCR0 IOMEM(0xe6150110)
-#define RMSTPCR1 IOMEM(0xe6150114)
-#define RMSTPCR2 IOMEM(0xe6150118)
-#define RMSTPCR3 IOMEM(0xe615011c)
-#define RMSTPCR4 IOMEM(0xe6150120)
-#define SMSTPCR0 IOMEM(0xe6150130)
-#define SMSTPCR1 IOMEM(0xe6150134)
-#define SMSTPCR2 IOMEM(0xe6150138)
-#define SMSTPCR3 IOMEM(0xe615013c)
-#define SMSTPCR4 IOMEM(0xe6150140)
-
-#define FSIDIVA 0xFE1F8000
-#define FSIDIVB 0xFE1F8008
-
-/* Platforms must set frequency on their DV_CLKI pin */
-struct clk sh7372_dv_clki_clk = {
-};
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7372_extal1_clk = {
- .rate = 26000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7372_extal2_clk = {
- .rate = 48000000,
-};
-
-SH_CLK_RATIO(div2, 1, 2);
-
-SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2);
-SH_FIXED_RATIO_CLK(extal1_div2_clk, sh7372_extal1_clk, div2);
-SH_FIXED_RATIO_CLK(extal2_div2_clk, sh7372_extal2_clk, div2);
-SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_div2_clk, div2);
-
-/* PLLC0 and PLLC1 */
-static unsigned long pllc01_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (__raw_readl(PLLC01CR) & (1 << 14))
- mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1) * 2;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc01_clk_ops = {
- .recalc = pllc01_recalc,
-};
-
-static struct clk pllc0_clk = {
- .ops = &pllc01_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
- .parent = &extal1_div2_clk,
- .enable_reg = (void __iomem *)FRQCRC,
-};
-
-static struct clk pllc1_clk = {
- .ops = &pllc01_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
- .parent = &extal1_div2_clk,
- .enable_reg = (void __iomem *)FRQCRA,
-};
-
-/* Divide PLLC1 by two */
-SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
-
-/* PLLC2 */
-
-/* Indices are important - they are the actual src selecting values */
-static struct clk *pllc2_parent[] = {
- [0] = &extal1_div2_clk,
- [1] = &extal2_div2_clk,
- [2] = &sh7372_dv_clki_div2_clk,
-};
-
-/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */
-static struct cpufreq_frequency_table pllc2_freq_table[29];
-
-static void pllc2_table_rebuild(struct clk *clk)
-{
- int i;
-
- /* Initialise PLLC2 frequency table */
- for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) {
- pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2;
- pllc2_freq_table[i].driver_data = i;
- }
-
- /* This is a special entry - switching PLL off makes it a repeater */
- pllc2_freq_table[i].frequency = clk->parent->rate;
- pllc2_freq_table[i].driver_data = i;
-
- pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END;
- pllc2_freq_table[i].driver_data = i;
-}
-
-static unsigned long pllc2_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- pllc2_table_rebuild(clk);
-
- /*
- * If the PLL is off, mult == 1, clk->rate will be updated in
- * pllc2_enable().
- */
- if (__raw_readl(PLLC2CR) & (1 << 31))
- mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
-
- return clk->parent->rate * mult;
-}
-
-static long pllc2_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_rate_table_round(clk, clk->freq_table, rate);
-}
-
-static int pllc2_enable(struct clk *clk)
-{
- int i;
-
- __raw_writel(__raw_readl(PLLC2CR) | 0x80000000, PLLC2CR);
-
- for (i = 0; i < 100; i++)
- if (__raw_readl(PLLC2CR) & 0x80000000) {
- clk->rate = pllc2_recalc(clk);
- return 0;
- }
-
- pr_err("%s(): timeout!\n", __func__);
-
- return -ETIMEDOUT;
-}
-
-static void pllc2_disable(struct clk *clk)
-{
- __raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
-}
-
-static int pllc2_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long value;
- int idx;
-
- idx = clk_rate_table_find(clk, clk->freq_table, rate);
- if (idx < 0)
- return idx;
-
- if (rate == clk->parent->rate)
- return -EINVAL;
-
- value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
-
- __raw_writel(value | ((idx + 19) << 24), PLLC2CR);
-
- clk->rate = clk->freq_table[idx].frequency;
-
- return 0;
-}
-
-static int pllc2_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 value;
- int ret, i;
-
- if (!clk->parent_table || !clk->parent_num)
- return -EINVAL;
-
- /* Search the parent */
- for (i = 0; i < clk->parent_num; i++)
- if (clk->parent_table[i] == parent)
- break;
-
- if (i == clk->parent_num)
- return -ENODEV;
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- value = __raw_readl(PLLC2CR) & ~(3 << 6);
-
- __raw_writel(value | (i << 6), PLLC2CR);
-
- /* Rebiuld the frequency table */
- pllc2_table_rebuild(clk);
-
- return 0;
-}
-
-static struct sh_clk_ops pllc2_clk_ops = {
- .recalc = pllc2_recalc,
- .round_rate = pllc2_round_rate,
- .set_rate = pllc2_set_rate,
- .enable = pllc2_enable,
- .disable = pllc2_disable,
- .set_parent = pllc2_set_parent,
-};
-
-struct clk sh7372_pllc2_clk = {
- .ops = &pllc2_clk_ops,
- .parent = &extal1_div2_clk,
- .freq_table = pllc2_freq_table,
- .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1,
- .parent_table = pllc2_parent,
- .parent_num = ARRAY_SIZE(pllc2_parent),
-};
-
-/* External input clock (pin name: FSIACK/FSIBCK ) */
-static struct clk fsiack_clk = {
-};
-
-static struct clk fsibck_clk = {
-};
-
-static struct clk *main_clks[] = {
- &sh7372_dv_clki_clk,
- &r_clk,
- &sh7372_extal1_clk,
- &sh7372_extal2_clk,
- &sh7372_dv_clki_div2_clk,
- &extal1_div2_clk,
- &extal2_div2_clk,
- &extal2_div4_clk,
- &pllc0_clk,
- &pllc1_clk,
- &pllc1_div2_clk,
- &sh7372_pllc2_clk,
- &fsiack_clk,
- &fsibck_clk,
-};
-
-static void div4_kick(struct clk *clk)
-{
- unsigned long value;
-
- /* set KICK bit in FRQCRB to update hardware setting */
- value = __raw_readl(FRQCRB);
- value |= (1 << 31);
- __raw_writel(value, FRQCRB);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48, 0, 72, 96, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
- .kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
- DIV4_ZX, DIV4_HP,
- DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
- DIV4_DDRP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
- [DIV4_ZG] = DIV4(FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
- [DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
- [DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
- [DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
- [DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
- [DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
- [DIV4_S] = DIV4(FRQCRC, 12, 0x6fff, 0),
- [DIV4_ZB] = DIV4(FRQCRC, 8, 0x6fff, 0),
- [DIV4_ZB3] = DIV4(FRQCRC, 4, 0x6fff, 0),
- [DIV4_CP] = DIV4(FRQCRC, 0, 0x6fff, 0),
- [DIV4_DDRP] = DIV4(FRQCRD, 0, 0x677c, 0),
-};
-
-enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
- DIV6_SUB, DIV6_SPU,
- DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
- DIV6_NR };
-
-static struct clk div6_clks[DIV6_NR] = {
- [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
- [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
- [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
- [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
- [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
- [DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0),
- [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
- [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
- [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
- [DIV6_DSI0P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI0PCKCR, 0),
- [DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0),
-};
-
-enum { DIV6_HDMI, DIV6_FSIA, DIV6_FSIB, DIV6_REPARENT_NR };
-
-/* Indices are important - they are the actual src selecting values */
-static struct clk *hdmi_parent[] = {
- [0] = &pllc1_div2_clk,
- [1] = &sh7372_pllc2_clk,
- [2] = &sh7372_dv_clki_clk,
- [3] = NULL, /* pllc2_div4 not implemented yet */
-};
-
-static struct clk *fsiackcr_parent[] = {
- [0] = &pllc1_div2_clk,
- [1] = &sh7372_pllc2_clk,
- [2] = &fsiack_clk, /* external input for FSI A */
- [3] = NULL, /* setting prohibited */
-};
-
-static struct clk *fsibckcr_parent[] = {
- [0] = &pllc1_div2_clk,
- [1] = &sh7372_pllc2_clk,
- [2] = &fsibck_clk, /* external input for FSI B */
- [3] = NULL, /* setting prohibited */
-};
-
-static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
- [DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0,
- hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
- [DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
- fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2),
- [DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
- fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
-};
-
-/* FSI DIV */
-enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR };
-
-static struct clk fsidivs[] = {
- [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]),
- [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]),
-};
-
-enum { MSTP001, MSTP000,
- MSTP131, MSTP130,
- MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
- MSTP118, MSTP117, MSTP116, MSTP113,
- MSTP106, MSTP101, MSTP100,
- MSTP223,
- MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207,
- MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP328, MSTP323, MSTP322, MSTP315, MSTP314, MSTP313, MSTP312,
- MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406,
- MSTP405, MSTP404, MSTP403, MSTP400,
- MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
- SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
- [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */
- [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
- [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
- [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
- [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
- [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
- [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
- [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
- [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
- [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
- [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
- [MSTP113] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 13, 0), /* MERAM */
- [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
- [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
- [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
- [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
- [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
- [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
- [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */
- [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */
- [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */
- [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
- [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
- [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */
- [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
- [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
- [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
- [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
- [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
- [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
- [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
- [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL*/
- [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
- [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
- [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */
- [MSTP423] = MSTP(&div4_clks[DIV4_B], SMSTPCR4, 23, 0), /* DSITX1 */
- [MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */
- [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
- [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
- [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
- [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */
- [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
- [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */
- [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */
- [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
- [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk),
- CLKDEV_CON_ID("r_clk", &r_clk),
- CLKDEV_CON_ID("extal1", &sh7372_extal1_clk),
- CLKDEV_CON_ID("extal2", &sh7372_extal2_clk),
- CLKDEV_CON_ID("extal1_div2_clk", &extal1_div2_clk),
- CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
- CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
- CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
- CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
- CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
- CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk),
- CLKDEV_CON_ID("fsiack", &fsiack_clk),
- CLKDEV_CON_ID("fsibck", &fsibck_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
- CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
- CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
- CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
- CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
- CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
- CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
- CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
- CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
- CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
- CLKDEV_CON_ID("ddrp_clk", &div4_clks[DIV4_DDRP]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
- CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
- CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
- CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
- CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
- CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
- CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
- CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
- CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
- CLKDEV_DEV_ID("fff30000.i2c", &mstp_clks[MSTP001]), /* IIC2 */
- CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */
- CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
- CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
- CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
- CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
- CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
- CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
- CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
- CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), /* IIC0 */
- CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[MSTP113]), /* MERAM */
- CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
- CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
- CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
- CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */
- CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */
- CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */
- CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */
- CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
- CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
- CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
- CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
- CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
- CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), /* IIC1 */
- CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
- CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
- CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */
- CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
- CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
- CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */
- CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
- CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMC */
- CLKDEV_DEV_ID("sh-mipi-dsi.1", &mstp_clks[MSTP423]), /* DSITX1 */
- CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
- CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), /* SDHI2 */
- CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
- CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
- CLKDEV_DEV_ID("e6d20000.i2c", &mstp_clks[MSTP411]), /* IIC3 */
- CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
- CLKDEV_DEV_ID("e6d30000.i2c", &mstp_clks[MSTP410]), /* IIC4 */
- CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */
- CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
- CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
- CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-
- /* ICK */
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
- CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1",
- &div6_reparent_clks[DIV6_HDMI]),
- CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
- CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
- CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */
- CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.4", &mstp_clks[MSTP405]), /* CMT4 */
- CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.3", &mstp_clks[MSTP404]), /* CMT3 */
- CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.2", &mstp_clks[MSTP400]), /* CMT2 */
- CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]),
- CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]),
- CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk),
- CLKDEV_ICK_ID("xckb", "sh_fsi2", &fsibck_clk),
-};
-
-void __init sh7372_clock_init(void)
-{
- int k, ret = 0;
-
- /* make sure MSTP bits on the RT/SH4AL-DSP side are off */
- __raw_writel(0xe4ef8087, RMSTPCR0);
- __raw_writel(0xffffffff, RMSTPCR1);
- __raw_writel(0x37c7f7ff, RMSTPCR2);
- __raw_writel(0xffffffff, RMSTPCR3);
- __raw_writel(0xffe0fffd, RMSTPCR4);
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- if (!ret)
- ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup sh7372 clocks\n");
-}
return 0;
}
-
-int __clk_get(struct clk *clk)
-{
- return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
struct clk;
extern int shmobile_clk_init(void);
-extern void shmobile_handle_irq_intc(struct pt_regs *);
extern struct platform_suspend_ops shmobile_suspend_ops;
#ifdef CONFIG_SUSPEND
+++ /dev/null
-/*
- * ARM Interrupt demux handler using INTC
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/entry-macro-multi.S>
-
-#define INTCA_BASE 0xe6980000
-#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */
-#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */
-#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */
-#define INTLVLB_OFFS 0x00000034 /* previous priority level */
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =INTCA_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- /* The single INTFLGA read access below results in the following:
- *
- * 1. INTLVLB is updated with old priority value from INTLVLA
- * 2. Highest priority interrupt is accepted
- * 3. INTLVLA is updated to contain priority of accepted interrupt
- * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
- */
- ldr \irqnr, [\base, #INTFLGA_OFFS]
-
- /* Restore INTLVLA with the value saved in INTLVLB.
- * This is required to support interrupt priorities properly.
- */
- ldrb \tmp, [\base, #INTLVLB_OFFS]
- strb \tmp, [\base, #INTLVLA_OFFS]
-
- /* Handle invalid vector number case */
- cmp \irqnr, #0
- beq 1000f
-
- /* Convert vector to irq number, same as the evt2irq() macro */
- lsr \irqnr, \irqnr, #0x5
- subs \irqnr, \irqnr, #16
-
-1000:
- .endm
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- .endm
-
- arch_irq_handler shmobile_handle_irq_intc
+++ /dev/null
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif /* __ASM_MACH_CLKDEV_H */
+++ /dev/null
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2010 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
-
-LIST "RWT Setting"
-EW 0xE6020004, 0xA500
-EW 0xE6030004, 0xA500
-
-LIST "GPIO Setting"
-EB 0xE6051013, 0xA2
-
-LIST "CPG"
-ED 0xE61500C0, 0x00000002
-
-WAIT 1, 0xFE40009C
-
-LIST "FRQCR"
-ED 0xE6150000, 0x2D1305C3
-ED 0xE61500E0, 0x9E40358E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xE61500E4, 0x00002000
-
-WAIT 1, 0xFE40009C
-
-LIST "PLL"
-ED 0xE6150028, 0x00004000
-
-WAIT 1, 0xFE40009C
-
-ED 0xE615002C, 0x93000040
-
-WAIT 1, 0xFE40009C
-
-LIST "SUB/USBClk"
-ED 0xE6150080, 0x00000180
-
-LIST "BSC"
-ED 0xFEC10000, 0x00E0001B
-
-LIST "SBSC1"
-ED 0xFE400354, 0x01AD8000
-ED 0xFE400354, 0x01AD8001
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400008, 0xBCC90151
-ED 0xFE400040, 0x41774113
-ED 0xFE400044, 0x2712E229
-ED 0xFE400048, 0x20C18505
-ED 0xFE40004C, 0x00110209
-ED 0xFE400010, 0x00000087
-
-WAIT 30, 0xFE40009C
-
-ED 0xFE400084, 0x0000003F
-EB 0xFE500000, 0x00
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400084, 0x0000FF0A
-EB 0xFE500000, 0x00
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400084, 0x00002201
-EB 0xFE500000, 0x00
-ED 0xFE400084, 0x00000302
-EB 0xFE500000, 0x00
-EB 0xFE5C0000, 0x00
-ED 0xFE400008, 0xBCC90159
-ED 0xFE40008C, 0x88800004
-ED 0xFE400094, 0x00000004
-ED 0xFE400028, 0xA55A0032
-ED 0xFE40002C, 0xA55A000C
-ED 0xFE400020, 0xA55A2048
-ED 0xFE400008, 0xBCC90959
-
-LIST "Change CPGA setting"
-ED 0xE61500E0, 0x9E40352E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400354, 0x01AD8002
-
-LIST "SCIF0 - Serial port for earlyprintk"
-EB 0xE6053098, 0xe1
-EW 0xE6C40000, 0x0000
-EB 0xE6C40004, 0x19
-EW 0xE6C40008, 0x0030
+++ /dev/null
-#ifndef MMC_MACKEREL_H
-#define MMC_MACKEREL_H
-
-#define PORT0CR (void __iomem *)0xe6051000
-#define PORT1CR (void __iomem *)0xe6051001
-#define PORT2CR (void __iomem *)0xe6051002
-#define PORT159CR (void __iomem *)0xe605009f
-
-#define PORTR031_000DR (void __iomem *)0xe6055000
-#define PORTL159_128DR (void __iomem *)0xe6054010
-
-static inline void mmc_init_progress(void)
-{
- /* Initialise LEDS0-3
- * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
- * value: 0x10 - enable output
- */
- __raw_writeb(0x10, PORT0CR);
- __raw_writeb(0x10, PORT1CR);
- __raw_writeb(0x10, PORT2CR);
- __raw_writeb(0x10, PORT159CR);
-}
-
-static inline void mmc_update_progress(int n)
-{
- unsigned a = 0, b = 0;
-
- if (n < 3)
- a = 1 << n;
- else
- b = 1 << 31;
-
- __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
- PORTR031_000DR);
- __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
- PORTL159_128DR);
-}
-#endif /* MMC_MACKEREL_H */
+++ /dev/null
-#ifndef MMC_H
-#define MMC_H
-
-/**************************************************
- *
- * board specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_MACH_MACKEREL
-#include "mach/mmc-mackerel.h"
-#else
-#error "unsupported board."
-#endif
-
-#endif /* MMC_H */
+++ /dev/null
-#ifndef SDHI_SH7372_H
-#define SDHI_SH7372_H
-
-#define SDGENCNTA 0xfe40009c
-
-/* The countdown of SDGENCNTA is controlled by
- * ZB3D2CLK which runs at 149.5MHz.
- * That is 149.5ticks/us. Approximate this as 150ticks/us.
- */
-static void udelay(int us)
-{
- __raw_writel(us * 150, SDGENCNTA);
- while(__raw_readl(SDGENCNTA)) ;
-}
-
-static void msleep(int ms)
-{
- udelay(ms * 1000);
-}
-
-#endif
+++ /dev/null
-#ifndef SDHI_H
-#define SDHI_H
-
-/**************************************************
- *
- * CPU specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_ARCH_SH7372
-#include "mach/sdhi-sh7372.h"
-#else
-#error "unsupported CPU."
-#endif
-
-#endif /* SDHI_H */
+++ /dev/null
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/system_misc.h>
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- soft_restart(0);
-}
-
-#endif
+++ /dev/null
-#ifndef __ASM_MACH_UNCOMPRESS_H
-#define __ASM_MACH_UNCOMPRESS_H
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif /* __ASM_MACH_UNCOMPRESS_H */
*
**************************************************/
-#ifdef CONFIG_MACH_MACKEREL
-#define MEMORY_START 0x40000000
-#include "mach/head-mackerel.txt"
-#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
+#ifdef CONFIG_MACH_KZM9G
#define MEMORY_START 0x43000000
#include "mach/head-kzm9g.txt"
#else
+++ /dev/null
-/*
- * sh7372 processor support - INTC hardware block
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "intc.h"
-#include "irqs.h"
-
-enum {
- UNUSED_INTCA = 0,
-
- /* interrupt sources INTCA */
- DIRC,
- CRYPT_STD,
- IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
- AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
- MFI_MFIM, MFI_MFIS,
- BBIF1, BBIF2,
- USBHSDMAC0_USHDMI,
- _3DG_SGX540,
- CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
- KEYSC_KEY,
- SCIFA0, SCIFA1, SCIFA2, SCIFA3,
- MSIOF2, MSIOF1,
- SCIFA4, SCIFA5, SCIFB,
- FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
- SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2,
- IRREM,
- IRDA,
- TPU0,
- TTI20,
- DDM,
- SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
- RWDT0,
- DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
- DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
- DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
- DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
- DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
- DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
- SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
- HDMI,
- SPU2_SPU0, SPU2_SPU1,
- FSI, FMSI,
- MIPI_HSI,
- IPMMU_IPMMUD,
- CEC_1, CEC_2,
- AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
- MFIS2,
- CPORTR2S,
- CMT14, CMT15,
- MMC_MMC_ERR, MMC_MMC_NOR,
- IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
- IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3,
- USB0_USB0I1, USB0_USB0I0,
- USB1_USB1I1, USB1_USB1I0,
- USBHSDMAC1_USHDMI,
-
- /* interrupt groups INTCA */
- DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
- AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2
-};
-
-static struct intc_vect intca_vectors[] __initdata = {
- INTC_VECT(DIRC, 0x0560),
- INTC_VECT(CRYPT_STD, 0x0700),
- INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
- INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
- INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
- INTC_VECT(AP_ARM_COMMRX, 0x0860),
- INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
- INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
- INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00),
- INTC_VECT(_3DG_SGX540, 0x0a60),
- INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
- INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
- INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
- INTC_VECT(KEYSC_KEY, 0x0be0),
- INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
- INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
- INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
- INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
- INTC_VECT(SCIFB, 0x0d60),
- INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
- INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
- INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
- INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
- INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
- INTC_VECT(SDHI1_SDHI1I2, 0x0ec0),
- INTC_VECT(IRREM, 0x0f60),
- INTC_VECT(IRDA, 0x0480),
- INTC_VECT(TPU0, 0x04a0),
- INTC_VECT(TTI20, 0x1100),
- INTC_VECT(DDM, 0x1140),
- INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
- INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
- INTC_VECT(RWDT0, 0x1280),
- INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020),
- INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060),
- INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0),
- INTC_VECT(DMAC1_2_DADERR, 0x20c0),
- INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
- INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
- INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
- INTC_VECT(DMAC2_2_DADERR, 0x21c0),
- INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
- INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
- INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
- INTC_VECT(DMAC3_2_DADERR, 0x22c0),
- INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320),
- INTC_VECT(SHWYSTAT_COM, 0x1340),
- INTC_VECT(HDMI, 0x17e0),
- INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
- INTC_VECT(FSI, 0x1840),
- INTC_VECT(FMSI, 0x1860),
- INTC_VECT(MIPI_HSI, 0x18e0),
- INTC_VECT(IPMMU_IPMMUD, 0x1920),
- INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960),
- INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
- INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
- INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
- INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
- INTC_VECT(MFIS2, 0x1a00),
- INTC_VECT(CPORTR2S, 0x1a20),
- INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
- INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0),
- INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20),
- INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60),
- INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0),
- INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0),
- INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0),
- INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0),
- INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00),
-};
-
-static struct intc_group intca_groups[] __initdata = {
- INTC_GROUP(DMAC1_1, DMAC1_1_DEI0,
- DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
- INTC_GROUP(DMAC1_2, DMAC1_2_DEI4,
- DMAC1_2_DEI5, DMAC1_2_DADERR),
- INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
- DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
- INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
- DMAC2_2_DEI5, DMAC2_2_DADERR),
- INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
- DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
- INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
- DMAC3_2_DEI5, DMAC3_2_DADERR),
- INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX),
- INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
- AP_ARM_DMAIRQ, AP_ARM_DMASIRQ),
- INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
- INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
- SDHI0_SDHI0I2, SDHI0_SDHI0I3),
- INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
- SDHI1_SDHI1I2),
- INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
- SDHI2_SDHI2I2, SDHI2_SDHI2I3),
- INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
-};
-
-static struct intc_mask_reg intca_mask_registers[] __initdata = {
- { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
- { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
- AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
- { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
- { 0, CRYPT_STD, DIRC, 0,
- DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
- { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
- { 0, 0, 0, 0,
- BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
- { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
- { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
- DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
- { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
- { DDM, 0, 0, 0,
- 0, 0, 0, 0 } },
- { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
- { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
- SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
- { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
- { SCIFB, SCIFA5, SCIFA4, MSIOF1,
- 0, 0, MSIOF2, 0 } },
- { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
- { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
- { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
- { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
- TTI20, USBHSDMAC0_USHDMI, 0, 0 } },
- { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
- { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
- CMT2, 0, 0, _3DG_SGX540 } },
- { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
- { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
- 0, 0, 0, 0 } },
- { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
- { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
- 0, 0, IRREM, 0 } },
- { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
- { 0, 0, TPU0, 0,
- 0, 0, 0, 0 } },
- { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
- { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
- 0, CMT3, 0, RWDT0 } },
- { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
- { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
- 0, 0, 0, 0 } },
- { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
- { 0, 0, 0, 0,
- 0, 0, 0, HDMI } },
- { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
- { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
- 0, 0, 0, MIPI_HSI } },
- { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
- { 0, IPMMU_IPMMUD, CEC_1, CEC_2,
- AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
- AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
- { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
- { MFIS2, CPORTR2S, CMT14, CMT15,
- 0, 0, MMC_MMC_ERR, MMC_MMC_NOR } },
- { 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */
- { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
- IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } },
- { 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */
- { 0, 0, 0, 0,
- USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } },
- { 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */
- { USBHSDMAC1_USHDMI, 0, 0, 0,
- 0, 0, 0, 0 } },
-};
-
-static struct intc_prio_reg intca_prio_registers[] __initdata = {
- { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
- { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
- { 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
- CMT1_CMT11, AP_ARM1 } },
- { 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0,
- CMT1_CMT12, 0 } },
- { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS,
- MFI_MFIM, 0 } },
- { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2,
- _3DG_SGX540, CMT1_CMT10 } },
- { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
- SCIFA2, SCIFA3 } },
- { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI,
- FLCTL, SDHI0 } },
- { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4,
- 0/* MSU */, IIC1 } },
- { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
- 0/* MSUG */, TTI20 } },
- { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
- { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } },
- { 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
- { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
- { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
- { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
- { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } },
- { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
- { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } },
- { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0,
- CEC_1, CEC_2 } },
- { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
- { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
- CMT14, CMT15 } },
- { 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
- MMC_MMC_ERR, MMC_MMC_NOR } },
- { 0xe6950040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
- IIC4_WAITI4, IIC4_DTEI4 } },
- { 0xe6950044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
- IIC3_WAITI3, IIC3_DTEI3 } },
- { 0xe6950048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
- 0/*TXI*/, 0/*TEI*/} },
- { 0xe695004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
- USB1_USB1I1, USB1_USB1I0 } },
- { 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
-};
-
-static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
- intca_vectors, intca_groups,
- intca_mask_registers, intca_prio_registers,
- NULL);
-
-INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000,
- INTC_VECT, "sh7372-intca-irq-lo");
-
-INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000,
- INTC_VECT, "sh7372-intca-irq-hi");
-
-enum {
- UNUSED_INTCS = 0,
- ENABLED_INTCS,
-
- /* interrupt sources INTCS */
-
- /* IRQ0S - IRQ31S */
- VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
- RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
- CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2,
- /* MFI */
- /* BBIF2 */
- VPU,
- TSIF1,
- /* 3DG */
- _2DDMAC,
- IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
- IPMMU_IPMMUR, IPMMU_IPMMUR2,
- RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
- /* KEYSC */
- /* TTI20 */
- MSIOF,
- IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
- TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
- CMT0,
- TSIF0,
- /* CMT2 */
- LMB,
- CTI,
- /* RWDT0 */
- ICB,
- JPU_JPEG,
- LCDC,
- LCRC,
- RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
- RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
- ISP,
- LCDC1,
- CSIRX,
- DSITX_DSITX0,
- DSITX_DSITX1,
- /* SPU2 */
- /* FSI */
- /* FMSI */
- /* HDMI */
- TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
- CMT4,
- DSITX1_DSITX1_0,
- DSITX1_DSITX1_1,
- MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */
- CPORTS2R,
- /* CEC */
- JPU6E,
-
- /* interrupt groups INTCS */
- RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
- RTDMAC2_1, RTDMAC2_2, TMU1, DSITX,
-};
-
-static struct intc_vect intcs_vectors[] = {
- /* IRQ0S - IRQ31S */
- INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720),
- INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760),
- INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
- INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
- INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0),
- INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0),
- /* MFI */
- /* BBIF2 */
- INTCS_VECT(VPU, 0x980),
- INTCS_VECT(TSIF1, 0x9a0),
- /* 3DG */
- INTCS_VECT(_2DDMAC, 0xa00),
- INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
- INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
- INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20),
- INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
- INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
- /* KEYSC */
- /* TTI20 */
- INTCS_VECT(MSIOF, 0x0d20),
- INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
- INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
- INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
- INTCS_VECT(TMU_TUNI2, 0xec0),
- INTCS_VECT(CMT0, 0xf00),
- INTCS_VECT(TSIF0, 0xf20),
- /* CMT2 */
- INTCS_VECT(LMB, 0xf60),
- INTCS_VECT(CTI, 0x400),
- /* RWDT0 */
- INTCS_VECT(ICB, 0x480),
- INTCS_VECT(JPU_JPEG, 0x560),
- INTCS_VECT(LCDC, 0x580),
- INTCS_VECT(LCRC, 0x5a0),
- INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
- INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
- INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13a0),
- INTCS_VECT(RTDMAC2_2_DADERR, 0x13c0),
- INTCS_VECT(ISP, 0x1720),
- INTCS_VECT(LCDC1, 0x1780),
- INTCS_VECT(CSIRX, 0x17a0),
- INTCS_VECT(DSITX_DSITX0, 0x17c0),
- INTCS_VECT(DSITX_DSITX1, 0x17e0),
- /* SPU2 */
- /* FSI */
- /* FMSI */
- /* HDMI */
- INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920),
- INTCS_VECT(TMU1_TUNI2, 0x1940),
- INTCS_VECT(CMT4, 0x1980),
- INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
- INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
- INTCS_VECT(MFIS2_INTCS, 0x1a00),
- INTCS_VECT(CPORTS2R, 0x1a20),
- /* CEC */
- INTCS_VECT(JPU6E, 0x1a80),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
- INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
- RTDMAC_1_DEI2, RTDMAC_1_DEI3),
- INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
- INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
- INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
- INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
- INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
- INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
- INTC_GROUP(RTDMAC2_1, RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
- RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
- INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4,
- RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
- INTC_GROUP(TMU1, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0),
- INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
- { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
- { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
- VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
- { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
- { 0, 0, 0, VPU,
- 0, 0, 0, 0 } },
- { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
- { 0, 0, 0, _2DDMAC,
- 0, 0, 0, ICB } },
- { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
- { 0, 0, 0, CTI,
- JPU_JPEG, 0, LCRC, LCDC } },
- { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
- { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
- RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
- { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
- { 0, 0, MSIOF, 0,
- 0, 0, 0, 0 } },
- { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
- { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
- 0, 0, 0, 0 } },
- { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
- { 0, 0, 0, CMT0,
- IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
- { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
- { 0, 0, IPMMU_IPMMUR2, IPMMU_IPMMUR,
- 0, 0, 0, 0 } },
- { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
- { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
- 0, TSIF1, LMB, TSIF0 } },
- { 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
- { 0, RTDMAC2_2_DADERR, RTDMAC2_2_DEI5, RTDMAC2_2_DEI4,
- RTDMAC2_1_DEI3, RTDMAC2_1_DEI2, RTDMAC2_1_DEI1, RTDMAC2_1_DEI0 } },
- { 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
- { 0, ISP, 0, 0,
- LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
- { 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
- { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } },
- { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
- { MFIS2_INTCS, CPORTS2R, 0, 0,
- JPU6E, 0, 0, 0 } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
- { 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC, ICB } },
- { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
- { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, CEU, 0, VPU } },
- { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT0 } },
- { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
- TMU_TUNI2, TSIF1 } },
- { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
- { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
- { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
- { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
- { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
- { 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC2_1, 0, 0, 0 } },
- { 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC2_2, 0, 0, 0 } },
- { 0xffd50020, 0, 16, 4, /* IPRIS3 */ { 0, ISP, 0, 0 } },
- { 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX, 0 } },
- { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
- { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0,
- DSITX1_DSITX1_1, 0 } },
- { 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R,
- 0, 0 } },
- { 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
- [0] = {
- .start = 0xffd20000,
- .end = 0xffd201ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0xffd50000,
- .end = 0xffd501ff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct intc_desc intcs_desc __initdata = {
- .name = "sh7372-intcs",
- .force_enable = ENABLED_INTCS,
- .skip_syscore_suspend = true,
- .resource = intcs_resources,
- .num_resources = ARRAY_SIZE(intcs_resources),
- .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
- intcs_prio_registers, NULL, NULL),
-};
-
-static void intcs_demux(unsigned int irq, struct irq_desc *desc)
-{
- void __iomem *reg = (void *)irq_get_handler_data(irq);
- unsigned int evtcodeas = ioread32(reg);
-
- generic_handle_irq(intcs_evt2irq(evtcodeas));
-}
-
-static void __iomem *intcs_ffd2;
-static void __iomem *intcs_ffd5;
-
-void __init sh7372_init_irq(void)
-{
- void __iomem *intevtsa;
- int n;
-
- intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE);
- intevtsa = intcs_ffd2 + 0x100;
- intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
-
- register_intc_controller(&intca_desc);
- register_intc_controller(&intca_irq_pins_lo_desc);
- register_intc_controller(&intca_irq_pins_hi_desc);
- register_intc_controller(&intcs_desc);
-
- /* setup dummy cascade chip for INTCS */
- n = evt2irq(0xf80);
- irq_alloc_desc_at(n, numa_node_id());
- irq_set_chip_and_handler_name(n, &dummy_irq_chip,
- handle_level_irq, "level");
- set_irq_flags(n, IRQF_VALID); /* yuck */
-
- /* demux using INTEVTSA */
- irq_set_handler_data(n, (void *)intevtsa);
- irq_set_chained_handler(n, intcs_demux);
-
- /* unmask INTCS in INTAMASK */
- iowrite16(0, intcs_ffd2 + 0x104);
-}
-
-static unsigned short ffd2[0x200];
-static unsigned short ffd5[0x100];
-
-void sh7372_intcs_suspend(void)
-{
- int k;
-
- for (k = 0x00; k <= 0x30; k += 4)
- ffd2[k] = __raw_readw(intcs_ffd2 + k);
-
- for (k = 0x80; k <= 0xb0; k += 4)
- ffd2[k] = __raw_readb(intcs_ffd2 + k);
-
- for (k = 0x180; k <= 0x188; k += 4)
- ffd2[k] = __raw_readb(intcs_ffd2 + k);
-
- for (k = 0x00; k <= 0x3c; k += 4)
- ffd5[k] = __raw_readw(intcs_ffd5 + k);
-
- for (k = 0x80; k <= 0x9c; k += 4)
- ffd5[k] = __raw_readb(intcs_ffd5 + k);
-}
-
-void sh7372_intcs_resume(void)
-{
- int k;
-
- for (k = 0x00; k <= 0x30; k += 4)
- __raw_writew(ffd2[k], intcs_ffd2 + k);
-
- for (k = 0x80; k <= 0xb0; k += 4)
- __raw_writeb(ffd2[k], intcs_ffd2 + k);
-
- for (k = 0x180; k <= 0x188; k += 4)
- __raw_writeb(ffd2[k], intcs_ffd2 + k);
-
- for (k = 0x00; k <= 0x3c; k += 4)
- __raw_writew(ffd5[k], intcs_ffd5 + k);
-
- for (k = 0x80; k <= 0x9c; k += 4)
- __raw_writeb(ffd5[k], intcs_ffd5 + k);
-}
-
-#define E694_BASE IOMEM(0xe6940000)
-#define E695_BASE IOMEM(0xe6950000)
-
-static unsigned short e694[0x200];
-static unsigned short e695[0x200];
-
-void sh7372_intca_suspend(void)
-{
- int k;
-
- for (k = 0x00; k <= 0x38; k += 4)
- e694[k] = __raw_readw(E694_BASE + k);
-
- for (k = 0x80; k <= 0xb4; k += 4)
- e694[k] = __raw_readb(E694_BASE + k);
-
- for (k = 0x180; k <= 0x1b4; k += 4)
- e694[k] = __raw_readb(E694_BASE + k);
-
- for (k = 0x00; k <= 0x50; k += 4)
- e695[k] = __raw_readw(E695_BASE + k);
-
- for (k = 0x80; k <= 0xa8; k += 4)
- e695[k] = __raw_readb(E695_BASE + k);
-
- for (k = 0x180; k <= 0x1a8; k += 4)
- e695[k] = __raw_readb(E695_BASE + k);
-}
-
-void sh7372_intca_resume(void)
-{
- int k;
-
- for (k = 0x00; k <= 0x38; k += 4)
- __raw_writew(e694[k], E694_BASE + k);
-
- for (k = 0x80; k <= 0xb4; k += 4)
- __raw_writeb(e694[k], E694_BASE + k);
-
- for (k = 0x180; k <= 0x1b4; k += 4)
- __raw_writeb(e694[k], E694_BASE + k);
-
- for (k = 0x00; k <= 0x50; k += 4)
- __raw_writew(e695[k], E695_BASE + k);
-
- for (k = 0x80; k <= 0xa8; k += 4)
- __raw_writeb(e695[k], E695_BASE + k);
-
- for (k = 0x180; k <= 0x1a8; k += 4)
- __raw_writeb(e695[k], E695_BASE + k);
-}
+++ /dev/null
-/*
- * sh7372 Power management support
- *
- * Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/cpuidle.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/bitrev.h>
-#include <linux/console.h>
-
-#include <asm/cpuidle.h>
-#include <asm/io.h>
-#include <asm/tlbflush.h>
-#include <asm/suspend.h>
-
-#include "common.h"
-#include "pm-rmobile.h"
-#include "sh7372.h"
-
-/* DBG */
-#define DBGREG1 IOMEM(0xe6100020)
-#define DBGREG9 IOMEM(0xe6100040)
-
-/* CPGA */
-#define SYSTBCR IOMEM(0xe6150024)
-#define MSTPSR0 IOMEM(0xe6150030)
-#define MSTPSR1 IOMEM(0xe6150038)
-#define MSTPSR2 IOMEM(0xe6150040)
-#define MSTPSR3 IOMEM(0xe6150048)
-#define MSTPSR4 IOMEM(0xe615004c)
-#define PLLC01STPCR IOMEM(0xe61500c8)
-
-/* SYSC */
-#define SYSC_BASE IOMEM(0xe6180000)
-
-#define SBAR IOMEM(0xe6180020)
-#define WUPRMSK IOMEM(0xe6180028)
-#define WUPSMSK IOMEM(0xe618002c)
-#define WUPSMSK2 IOMEM(0xe6180048)
-#define WUPSFAC IOMEM(0xe6180098)
-#define IRQCR IOMEM(0xe618022c)
-#define IRQCR2 IOMEM(0xe6180238)
-#define IRQCR3 IOMEM(0xe6180244)
-#define IRQCR4 IOMEM(0xe6180248)
-#define PDNSEL IOMEM(0xe6180254)
-
-/* INTC */
-#define ICR1A IOMEM(0xe6900000)
-#define ICR2A IOMEM(0xe6900004)
-#define ICR3A IOMEM(0xe6900008)
-#define ICR4A IOMEM(0xe690000c)
-#define INTMSK00A IOMEM(0xe6900040)
-#define INTMSK10A IOMEM(0xe6900044)
-#define INTMSK20A IOMEM(0xe6900048)
-#define INTMSK30A IOMEM(0xe690004c)
-
-/* MFIS */
-/* FIXME: pointing where? */
-#define SMFRAM 0xe6a70000
-
-/* AP-System Core */
-#define APARMBAREA IOMEM(0xe6f10020)
-
-#ifdef CONFIG_PM
-
-#define PM_DOMAIN_ON_OFF_LATENCY_NS 250000
-
-static int sh7372_a4r_pd_suspend(void)
-{
- sh7372_intcs_suspend();
- __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */
- return 0;
-}
-
-static bool a4s_suspend_ready;
-
-static int sh7372_a4s_pd_suspend(void)
-{
- /*
- * The A4S domain contains the CPU core and therefore it should
- * only be turned off if the CPU is not in use. This may happen
- * during system suspend, when SYSC is going to be used for generating
- * resume signals and a4s_suspend_ready is set to let
- * sh7372_enter_suspend() know that it can turn A4S off.
- */
- a4s_suspend_ready = true;
- return -EBUSY;
-}
-
-static void sh7372_a4s_pd_resume(void)
-{
- a4s_suspend_ready = false;
-}
-
-static int sh7372_a3sp_pd_suspend(void)
-{
- /*
- * Serial consoles make use of SCIF hardware located in A3SP,
- * keep such power domain on if "no_console_suspend" is set.
- */
- return console_suspend_enabled ? 0 : -EBUSY;
-}
-
-static struct rmobile_pm_domain sh7372_pm_domains[] = {
- {
- .genpd.name = "A4LC",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 1,
- },
- {
- .genpd.name = "A4MP",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 2,
- },
- {
- .genpd.name = "D4",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 3,
- },
- {
- .genpd.name = "A4R",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 5,
- .suspend = sh7372_a4r_pd_suspend,
- .resume = sh7372_intcs_resume,
- },
- {
- .genpd.name = "A3RV",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 6,
- },
- {
- .genpd.name = "A3RI",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 8,
- },
- {
- .genpd.name = "A4S",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 10,
- .gov = &pm_domain_always_on_gov,
- .no_debug = true,
- .suspend = sh7372_a4s_pd_suspend,
- .resume = sh7372_a4s_pd_resume,
- },
- {
- .genpd.name = "A3SP",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 11,
- .gov = &pm_domain_always_on_gov,
- .no_debug = true,
- .suspend = sh7372_a3sp_pd_suspend,
- },
- {
- .genpd.name = "A3SG",
- .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
- .base = SYSC_BASE,
- .bit_shift = 13,
- },
-};
-
-void __init sh7372_init_pm_domains(void)
-{
- rmobile_init_domains(sh7372_pm_domains, ARRAY_SIZE(sh7372_pm_domains));
- pm_genpd_add_subdomain_names("A4LC", "A3RV");
- pm_genpd_add_subdomain_names("A4R", "A4LC");
- pm_genpd_add_subdomain_names("A4S", "A3SG");
- pm_genpd_add_subdomain_names("A4S", "A3SP");
-}
-
-#endif /* CONFIG_PM */
-
-#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
-static void sh7372_set_reset_vector(unsigned long address)
-{
- /* set reset vector, translate 4k */
- __raw_writel(address, SBAR);
- __raw_writel(0, APARMBAREA);
-}
-
-static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode)
-{
- if (pllc0_on)
- __raw_writel(0, PLLC01STPCR);
- else
- __raw_writel(1 << 28, PLLC01STPCR);
-
- __raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */
- cpu_suspend(sleep_mode, sh7372_do_idle_sysc);
- __raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */
-
- /* disable reset vector translation */
- __raw_writel(0, SBAR);
-}
-
-static int sh7372_sysc_valid(unsigned long *mskp, unsigned long *msk2p)
-{
- unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4;
- unsigned long msk, msk2;
-
- /* check active clocks to determine potential wakeup sources */
-
- mstpsr0 = __raw_readl(MSTPSR0);
- if ((mstpsr0 & 0x00000003) != 0x00000003) {
- pr_debug("sh7372 mstpsr0 0x%08lx\n", mstpsr0);
- return 0;
- }
-
- mstpsr1 = __raw_readl(MSTPSR1);
- if ((mstpsr1 & 0xff079b7f) != 0xff079b7f) {
- pr_debug("sh7372 mstpsr1 0x%08lx\n", mstpsr1);
- return 0;
- }
-
- mstpsr2 = __raw_readl(MSTPSR2);
- if ((mstpsr2 & 0x000741ff) != 0x000741ff) {
- pr_debug("sh7372 mstpsr2 0x%08lx\n", mstpsr2);
- return 0;
- }
-
- mstpsr3 = __raw_readl(MSTPSR3);
- if ((mstpsr3 & 0x1a60f010) != 0x1a60f010) {
- pr_debug("sh7372 mstpsr3 0x%08lx\n", mstpsr3);
- return 0;
- }
-
- mstpsr4 = __raw_readl(MSTPSR4);
- if ((mstpsr4 & 0x00008cf0) != 0x00008cf0) {
- pr_debug("sh7372 mstpsr4 0x%08lx\n", mstpsr4);
- return 0;
- }
-
- msk = 0;
- msk2 = 0;
-
- /* make bitmaps of limited number of wakeup sources */
-
- if ((mstpsr2 & (1 << 23)) == 0) /* SPU2 */
- msk |= 1 << 31;
-
- if ((mstpsr2 & (1 << 12)) == 0) /* MFI_MFIM */
- msk |= 1 << 21;
-
- if ((mstpsr4 & (1 << 3)) == 0) /* KEYSC */
- msk |= 1 << 2;
-
- if ((mstpsr1 & (1 << 24)) == 0) /* CMT0 */
- msk |= 1 << 1;
-
- if ((mstpsr3 & (1 << 29)) == 0) /* CMT1 */
- msk |= 1 << 1;
-
- if ((mstpsr4 & (1 << 0)) == 0) /* CMT2 */
- msk |= 1 << 1;
-
- if ((mstpsr2 & (1 << 13)) == 0) /* MFI_MFIS */
- msk2 |= 1 << 17;
-
- *mskp = msk;
- *msk2p = msk2;
-
- return 1;
-}
-
-static void sh7372_icr_to_irqcr(unsigned long icr, u16 *irqcr1p, u16 *irqcr2p)
-{
- u16 tmp, irqcr1, irqcr2;
- int k;
-
- irqcr1 = 0;
- irqcr2 = 0;
-
- /* convert INTCA ICR register layout to SYSC IRQCR+IRQCR2 */
- for (k = 0; k <= 7; k++) {
- tmp = (icr >> ((7 - k) * 4)) & 0xf;
- irqcr1 |= (tmp & 0x03) << (k * 2);
- irqcr2 |= (tmp >> 2) << (k * 2);
- }
-
- *irqcr1p = irqcr1;
- *irqcr2p = irqcr2;
-}
-
-static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2)
-{
- u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high;
- unsigned long tmp;
-
- /* read IRQ0A -> IRQ15A mask */
- tmp = bitrev8(__raw_readb(INTMSK00A));
- tmp |= bitrev8(__raw_readb(INTMSK10A)) << 8;
-
- /* setup WUPSMSK from clocks and external IRQ mask */
- msk = (~msk & 0xc030000f) | (tmp << 4);
- __raw_writel(msk, WUPSMSK);
-
- /* propage level/edge trigger for external IRQ 0->15 */
- sh7372_icr_to_irqcr(__raw_readl(ICR1A), &irqcrx_low, &irqcry_low);
- sh7372_icr_to_irqcr(__raw_readl(ICR2A), &irqcrx_high, &irqcry_high);
- __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR);
- __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR2);
-
- /* read IRQ16A -> IRQ31A mask */
- tmp = bitrev8(__raw_readb(INTMSK20A));
- tmp |= bitrev8(__raw_readb(INTMSK30A)) << 8;
-
- /* setup WUPSMSK2 from clocks and external IRQ mask */
- msk2 = (~msk2 & 0x00030000) | tmp;
- __raw_writel(msk2, WUPSMSK2);
-
- /* propage level/edge trigger for external IRQ 16->31 */
- sh7372_icr_to_irqcr(__raw_readl(ICR3A), &irqcrx_low, &irqcry_low);
- sh7372_icr_to_irqcr(__raw_readl(ICR4A), &irqcrx_high, &irqcry_high);
- __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3);
- __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4);
-}
-
-static void sh7372_enter_a3sm_common(int pllc0_on)
-{
- /* use INTCA together with SYSC for wakeup */
- sh7372_setup_sysc(1 << 0, 0);
- sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
- sh7372_enter_sysc(pllc0_on, 1 << 12);
-}
-
-static void sh7372_enter_a4s_common(int pllc0_on)
-{
- sh7372_intca_suspend();
- sh7372_set_reset_vector(SMFRAM);
- sh7372_enter_sysc(pllc0_on, 1 << 10);
- sh7372_intca_resume();
-}
-
-static void sh7372_pm_setup_smfram(void)
-{
- /* pass physical address of cpu_resume() to assembly resume code */
- sh7372_cpu_resume = virt_to_phys(cpu_resume);
-
- memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
-}
-#else
-static inline void sh7372_pm_setup_smfram(void) {}
-#endif /* CONFIG_SUSPEND || CONFIG_CPU_IDLE */
-
-#ifdef CONFIG_CPU_IDLE
-static int sh7372_do_idle_core_standby(unsigned long unused)
-{
- cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */
- return 0;
-}
-
-static int sh7372_enter_core_standby(struct cpuidle_device *dev,
- struct cpuidle_driver *drv, int index)
-{
- sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
-
- /* enter sleep mode with SYSTBCR to 0x10 */
- __raw_writel(0x10, SYSTBCR);
- cpu_suspend(0, sh7372_do_idle_core_standby);
- __raw_writel(0, SYSTBCR);
-
- /* disable reset vector translation */
- __raw_writel(0, SBAR);
-
- return 1;
-}
-
-static int sh7372_enter_a3sm_pll_on(struct cpuidle_device *dev,
- struct cpuidle_driver *drv, int index)
-{
- sh7372_enter_a3sm_common(1);
- return 2;
-}
-
-static int sh7372_enter_a3sm_pll_off(struct cpuidle_device *dev,
- struct cpuidle_driver *drv, int index)
-{
- sh7372_enter_a3sm_common(0);
- return 3;
-}
-
-static int sh7372_enter_a4s(struct cpuidle_device *dev,
- struct cpuidle_driver *drv, int index)
-{
- unsigned long msk, msk2;
-
- if (!sh7372_sysc_valid(&msk, &msk2))
- return sh7372_enter_a3sm_pll_off(dev, drv, index);
-
- sh7372_setup_sysc(msk, msk2);
- sh7372_enter_a4s_common(0);
- return 4;
-}
-
-static struct cpuidle_driver sh7372_cpuidle_driver = {
- .name = "sh7372_cpuidle",
- .owner = THIS_MODULE,
- .state_count = 5,
- .safe_state_index = 0, /* C1 */
- .states[0] = ARM_CPUIDLE_WFI_STATE,
- .states[1] = {
- .name = "C2",
- .desc = "Core Standby Mode",
- .exit_latency = 10,
- .target_residency = 20 + 10,
- .enter = sh7372_enter_core_standby,
- },
- .states[2] = {
- .name = "C3",
- .desc = "A3SM PLL ON",
- .exit_latency = 20,
- .target_residency = 30 + 20,
- .enter = sh7372_enter_a3sm_pll_on,
- },
- .states[3] = {
- .name = "C4",
- .desc = "A3SM PLL OFF",
- .exit_latency = 120,
- .target_residency = 30 + 120,
- .enter = sh7372_enter_a3sm_pll_off,
- },
- .states[4] = {
- .name = "C5",
- .desc = "A4S PLL OFF",
- .exit_latency = 240,
- .target_residency = 30 + 240,
- .enter = sh7372_enter_a4s,
- .disabled = true,
- },
-};
-
-static void __init sh7372_cpuidle_init(void)
-{
- return cpuidle_register(cpuidle_drv, NULL);
-}
-#else
-static void __init sh7372_cpuidle_init(void) {}
-#endif
-
-#ifdef CONFIG_SUSPEND
-static int sh7372_enter_suspend(suspend_state_t suspend_state)
-{
- unsigned long msk, msk2;
-
- /* check active clocks to determine potential wakeup sources */
- if (sh7372_sysc_valid(&msk, &msk2) && a4s_suspend_ready) {
- /* convert INTC mask/sense to SYSC mask/sense */
- sh7372_setup_sysc(msk, msk2);
-
- /* enter A4S sleep with PLLC0 off */
- pr_debug("entering A4S\n");
- sh7372_enter_a4s_common(0);
- return 0;
- }
-
- /* default to enter A3SM sleep with PLLC0 off */
- pr_debug("entering A3SM\n");
- sh7372_enter_a3sm_common(0);
- return 0;
-}
-
-/**
- * sh7372_pm_notifier_fn - SH7372 PM notifier routine.
- * @notifier: Unused.
- * @pm_event: Event being handled.
- * @unused: Unused.
- */
-static int sh7372_pm_notifier_fn(struct notifier_block *notifier,
- unsigned long pm_event, void *unused)
-{
- switch (pm_event) {
- case PM_SUSPEND_PREPARE:
- /*
- * This is necessary, because the A4R domain has to be "on"
- * when suspend_device_irqs() and resume_device_irqs() are
- * executed during system suspend and resume, respectively, so
- * that those functions don't crash while accessing the INTCS.
- */
- pm_genpd_name_poweron("A4R");
- break;
- case PM_POST_SUSPEND:
- pm_genpd_poweroff_unused();
- break;
- }
-
- return NOTIFY_DONE;
-}
-
-static void sh7372_suspend_init(void)
-{
- shmobile_suspend_ops.enter = sh7372_enter_suspend;
- pm_notifier(sh7372_pm_notifier_fn, 0);
-}
-#else
-static void sh7372_suspend_init(void) {}
-#endif
-
-void __init sh7372_pm_init(void)
-{
- /* enable DBG hardware block to kick SYSC */
- __raw_writel(0x0000a500, DBGREG9);
- __raw_writel(0x0000a501, DBGREG9);
- __raw_writel(0x00000000, DBGREG1);
-
- /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
- __raw_writel(0, PDNSEL);
-
- sh7372_pm_setup_smfram();
-
- sh7372_suspend_init();
- sh7372_cpuidle_init();
-}
-
-void __init sh7372_pm_init_late(void)
-{
- shmobile_init_late();
- pm_genpd_name_attach_cpuidle("A4S", 4);
-}
+++ /dev/null
-#ifndef __ASM_R8A73A4_H__
-#define __ASM_R8A73A4_H__
-
-/* DMA slave IDs */
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_MMCIF0_TX,
- SHDMA_SLAVE_MMCIF0_RX,
- SHDMA_SLAVE_MMCIF1_TX,
- SHDMA_SLAVE_MMCIF1_RX,
-};
-
-void r8a73a4_add_standard_devices(void);
-void r8a73a4_clock_init(void);
-void r8a73a4_pinmux_init(void);
-
-#endif /* __ASM_R8A73A4_H__ */
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/irq-renesas-irqc.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
+
+#include <linux/init.h>
#include <asm/mach/arch.h>
#include "common.h"
-#include "dma-register.h"
-#include "irqs.h"
-#include "r8a73a4.h"
-
-static const struct resource pfc_resources[] = {
- DEFINE_RES_MEM(0xe6050000, 0x9000),
-};
-
-void __init r8a73a4_pinmux_init(void)
-{
- platform_device_register_simple("pfc-r8a73a4", -1, pfc_resources,
- ARRAY_SIZE(pfc_resources));
-}
-
-#define R8A73A4_SCIF(scif_type, _scscr, index, baseaddr, irq) \
-static struct plat_sci_port scif##index##_platform_data = { \
- .type = scif_type, \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scscr = _scscr, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq), \
-}
-
-#define R8A73A4_SCIFA(index, baseaddr, irq) \
- R8A73A4_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
- index, baseaddr, irq)
-
-#define R8A73A4_SCIFB(index, baseaddr, irq) \
- R8A73A4_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \
- index, baseaddr, irq)
-
-R8A73A4_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
-R8A73A4_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
-R8A73A4_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
-R8A73A4_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
-R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
-R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */
-
-#define r8a73a4_register_scif(index) \
- platform_device_register_resndata(NULL, "sh-sci", index, \
- scif##index##_resources, \
- ARRAY_SIZE(scif##index##_resources), \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
-
-static const struct renesas_irqc_config irqc0_data = {
- .irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
-};
-
-static const struct resource irqc0_resources[] = {
- DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
- DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
- DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
- DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
- DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
- DEFINE_RES_IRQ(gic_spi(4)), /* IRQ4 */
- DEFINE_RES_IRQ(gic_spi(5)), /* IRQ5 */
- DEFINE_RES_IRQ(gic_spi(6)), /* IRQ6 */
- DEFINE_RES_IRQ(gic_spi(7)), /* IRQ7 */
- DEFINE_RES_IRQ(gic_spi(8)), /* IRQ8 */
- DEFINE_RES_IRQ(gic_spi(9)), /* IRQ9 */
- DEFINE_RES_IRQ(gic_spi(10)), /* IRQ10 */
- DEFINE_RES_IRQ(gic_spi(11)), /* IRQ11 */
- DEFINE_RES_IRQ(gic_spi(12)), /* IRQ12 */
- DEFINE_RES_IRQ(gic_spi(13)), /* IRQ13 */
- DEFINE_RES_IRQ(gic_spi(14)), /* IRQ14 */
- DEFINE_RES_IRQ(gic_spi(15)), /* IRQ15 */
- DEFINE_RES_IRQ(gic_spi(16)), /* IRQ16 */
- DEFINE_RES_IRQ(gic_spi(17)), /* IRQ17 */
- DEFINE_RES_IRQ(gic_spi(18)), /* IRQ18 */
- DEFINE_RES_IRQ(gic_spi(19)), /* IRQ19 */
- DEFINE_RES_IRQ(gic_spi(20)), /* IRQ20 */
- DEFINE_RES_IRQ(gic_spi(21)), /* IRQ21 */
- DEFINE_RES_IRQ(gic_spi(22)), /* IRQ22 */
- DEFINE_RES_IRQ(gic_spi(23)), /* IRQ23 */
- DEFINE_RES_IRQ(gic_spi(24)), /* IRQ24 */
- DEFINE_RES_IRQ(gic_spi(25)), /* IRQ25 */
- DEFINE_RES_IRQ(gic_spi(26)), /* IRQ26 */
- DEFINE_RES_IRQ(gic_spi(27)), /* IRQ27 */
- DEFINE_RES_IRQ(gic_spi(28)), /* IRQ28 */
- DEFINE_RES_IRQ(gic_spi(29)), /* IRQ29 */
- DEFINE_RES_IRQ(gic_spi(30)), /* IRQ30 */
- DEFINE_RES_IRQ(gic_spi(31)), /* IRQ31 */
-};
-
-static const struct renesas_irqc_config irqc1_data = {
- .irq_base = irq_pin(32), /* IRQ32 -> IRQ57 */
-};
-
-static const struct resource irqc1_resources[] = {
- DEFINE_RES_MEM(0xe61c0200, 0x200), /* IRQC Event Detector Block_1 */
- DEFINE_RES_IRQ(gic_spi(32)), /* IRQ32 */
- DEFINE_RES_IRQ(gic_spi(33)), /* IRQ33 */
- DEFINE_RES_IRQ(gic_spi(34)), /* IRQ34 */
- DEFINE_RES_IRQ(gic_spi(35)), /* IRQ35 */
- DEFINE_RES_IRQ(gic_spi(36)), /* IRQ36 */
- DEFINE_RES_IRQ(gic_spi(37)), /* IRQ37 */
- DEFINE_RES_IRQ(gic_spi(38)), /* IRQ38 */
- DEFINE_RES_IRQ(gic_spi(39)), /* IRQ39 */
- DEFINE_RES_IRQ(gic_spi(40)), /* IRQ40 */
- DEFINE_RES_IRQ(gic_spi(41)), /* IRQ41 */
- DEFINE_RES_IRQ(gic_spi(42)), /* IRQ42 */
- DEFINE_RES_IRQ(gic_spi(43)), /* IRQ43 */
- DEFINE_RES_IRQ(gic_spi(44)), /* IRQ44 */
- DEFINE_RES_IRQ(gic_spi(45)), /* IRQ45 */
- DEFINE_RES_IRQ(gic_spi(46)), /* IRQ46 */
- DEFINE_RES_IRQ(gic_spi(47)), /* IRQ47 */
- DEFINE_RES_IRQ(gic_spi(48)), /* IRQ48 */
- DEFINE_RES_IRQ(gic_spi(49)), /* IRQ49 */
- DEFINE_RES_IRQ(gic_spi(50)), /* IRQ50 */
- DEFINE_RES_IRQ(gic_spi(51)), /* IRQ51 */
- DEFINE_RES_IRQ(gic_spi(52)), /* IRQ52 */
- DEFINE_RES_IRQ(gic_spi(53)), /* IRQ53 */
- DEFINE_RES_IRQ(gic_spi(54)), /* IRQ54 */
- DEFINE_RES_IRQ(gic_spi(55)), /* IRQ55 */
- DEFINE_RES_IRQ(gic_spi(56)), /* IRQ56 */
- DEFINE_RES_IRQ(gic_spi(57)), /* IRQ57 */
-};
-
-#define r8a73a4_register_irqc(idx) \
- platform_device_register_resndata(NULL, "renesas_irqc", \
- idx, irqc##idx##_resources, \
- ARRAY_SIZE(irqc##idx##_resources), \
- &irqc##idx##_data, \
- sizeof(struct renesas_irqc_config))
-
-/* Thermal0 -> Thermal2 */
-static const struct resource thermal0_resources[] = {
- DEFINE_RES_MEM(0xe61f0000, 0x14),
- DEFINE_RES_MEM(0xe61f0100, 0x38),
- DEFINE_RES_MEM(0xe61f0200, 0x38),
- DEFINE_RES_MEM(0xe61f0300, 0x38),
- DEFINE_RES_IRQ(gic_spi(69)),
-};
-
-#define r8a73a4_register_thermal() \
- platform_device_register_simple("rcar_thermal", -1, \
- thermal0_resources, \
- ARRAY_SIZE(thermal0_resources))
-
-static struct sh_timer_config cmt1_platform_data = {
- .channels_mask = 0xff,
-};
-
-static struct resource cmt1_resources[] = {
- DEFINE_RES_MEM(0xe6130000, 0x1004),
- DEFINE_RES_IRQ(gic_spi(120)),
-};
-
-#define r8a73a4_register_cmt(idx) \
- platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \
- idx, cmt##idx##_resources, \
- ARRAY_SIZE(cmt##idx##_resources), \
- &cmt##idx##_platform_data, \
- sizeof(struct sh_timer_config))
-
-/* DMA */
-static const struct sh_dmae_slave_config dma_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_MMCIF0_TX,
- .addr = 0xee200034,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0xd1,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF0_RX,
- .addr = 0xee200034,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0xd2,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF1_TX,
- .addr = 0xee220034,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0xe1,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF1_RX,
- .addr = 0xee220034,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0xe2,
- },
-};
-
-#define DMAE_CHANNEL(a, b) \
- { \
- .offset = (a) - 0x20, \
- .dmars = (a) - 0x20 + 0x40, \
- .chclr_bit = (b), \
- .chclr_offset = 0x80 - 0x20, \
- }
-
-static const struct sh_dmae_channel dma_channels[] = {
- DMAE_CHANNEL(0x8000, 0),
- DMAE_CHANNEL(0x8080, 1),
- DMAE_CHANNEL(0x8100, 2),
- DMAE_CHANNEL(0x8180, 3),
- DMAE_CHANNEL(0x8200, 4),
- DMAE_CHANNEL(0x8280, 5),
- DMAE_CHANNEL(0x8300, 6),
- DMAE_CHANNEL(0x8380, 7),
- DMAE_CHANNEL(0x8400, 8),
- DMAE_CHANNEL(0x8480, 9),
- DMAE_CHANNEL(0x8500, 10),
- DMAE_CHANNEL(0x8580, 11),
- DMAE_CHANNEL(0x8600, 12),
- DMAE_CHANNEL(0x8680, 13),
- DMAE_CHANNEL(0x8700, 14),
- DMAE_CHANNEL(0x8780, 15),
- DMAE_CHANNEL(0x8800, 16),
- DMAE_CHANNEL(0x8880, 17),
- DMAE_CHANNEL(0x8900, 18),
- DMAE_CHANNEL(0x8980, 19),
-};
-
-static const struct sh_dmae_pdata dma_pdata = {
- .slave = dma_slaves,
- .slave_num = ARRAY_SIZE(dma_slaves),
- .channel = dma_channels,
- .channel_num = ARRAY_SIZE(dma_channels),
- .ts_low_shift = TS_LOW_SHIFT,
- .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
- .ts_high_shift = TS_HI_SHIFT,
- .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
- .ts_shift = dma_ts_shift,
- .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
- .dmaor_init = DMAOR_DME,
- .chclr_present = 1,
- .chclr_bitwise = 1,
-};
-
-static struct resource dma_resources[] = {
- DEFINE_RES_MEM(0xe6700020, 0x89e0),
- DEFINE_RES_IRQ(gic_spi(220)),
- {
- /* IRQ for channels 0-19 */
- .start = gic_spi(200),
- .end = gic_spi(219),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define r8a73a4_register_dmac() \
- platform_device_register_resndata(NULL, "sh-dma-engine", 0, \
- dma_resources, ARRAY_SIZE(dma_resources), \
- &dma_pdata, sizeof(dma_pdata))
-
-void __init r8a73a4_add_standard_devices(void)
-{
- r8a73a4_register_cmt(1);
- r8a73a4_register_scif(0);
- r8a73a4_register_scif(1);
- r8a73a4_register_scif(2);
- r8a73a4_register_scif(3);
- r8a73a4_register_scif(4);
- r8a73a4_register_scif(5);
- r8a73a4_register_irqc(0);
- r8a73a4_register_irqc(1);
- r8a73a4_register_thermal();
- r8a73a4_register_dmac();
-}
-
-#ifdef CONFIG_USE_OF
static const char *r8a73a4_boards_compat_dt[] __initdata = {
"renesas,r8a73a4",
.init_late = shmobile_init_late,
.dt_compat = r8a73a4_boards_compat_dt,
MACHINE_END
-#endif /* CONFIG_USE_OF */
* GNU General Public License for more details.
*/
+#include <linux/clk/shmobile.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include "irqs.h"
#include "r8a7778.h"
+#define MODEMR 0xffcc0020
+
+#ifdef CONFIG_COMMON_CLK
+static void __init r8a7778_timer_init(void)
+{
+ u32 mode;
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+ r8a7778_clocks_init(mode);
+}
+#endif
+
/* SCIF */
#define R8A7778_SCIF(index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
.init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_late = shmobile_init_late,
+#ifdef CONFIG_COMMON_CLK
+ .init_time = r8a7778_timer_init,
+#endif
.dt_compat = r8a7778_compat_dt,
MACHINE_END
+++ /dev/null
-/*
- * sh7372 processor support
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2008 Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/of_platform.h>
-#include <linux/uio_driver.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_domain.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/sh_ipmmu.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "dma-register.h"
-#include "intc.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "sh7372.h"
-
-static struct map_desc sh7372_io_desc[] __initdata = {
- /* create a 1:1 identity mapping for 0xe6xxxxxx
- * used by CPGA, INTC and PFC.
- */
- {
- .virtual = 0xe6000000,
- .pfn = __phys_to_pfn(0xe6000000),
- .length = 256 << 20,
- .type = MT_DEVICE_NONSHARED
- },
-};
-
-void __init sh7372_map_io(void)
-{
- debug_ll_io_init();
- iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
-}
-
-/* PFC */
-static struct resource sh7372_pfc_resources[] = {
- [0] = {
- .start = 0xe6050000,
- .end = 0xe6057fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0xe605800c,
- .end = 0xe6058027,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device sh7372_pfc_device = {
- .name = "pfc-sh7372",
- .id = -1,
- .resource = sh7372_pfc_resources,
- .num_resources = ARRAY_SIZE(sh7372_pfc_resources),
-};
-
-void __init sh7372_pinmux_init(void)
-{
- platform_device_register(&sh7372_pfc_device);
-}
-
-/* SCIF */
-#define SH7372_SCIF(scif_type, index, baseaddr, irq) \
-static struct plat_sci_port scif##index##_platform_data = { \
- .type = scif_type, \
- .flags = UPF_BOOT_AUTOCONF, \
- .scscr = SCSCR_RE | SCSCR_TE, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq), \
-}; \
- \
-static struct platform_device scif##index##_device = { \
- .name = "sh-sci", \
- .id = index, \
- .resource = scif##index##_resources, \
- .num_resources = ARRAY_SIZE(scif##index##_resources), \
- .dev = { \
- .platform_data = &scif##index##_platform_data, \
- }, \
-}
-
-SH7372_SCIF(PORT_SCIFA, 0, 0xe6c40000, evt2irq(0x0c00));
-SH7372_SCIF(PORT_SCIFA, 1, 0xe6c50000, evt2irq(0x0c20));
-SH7372_SCIF(PORT_SCIFA, 2, 0xe6c60000, evt2irq(0x0c40));
-SH7372_SCIF(PORT_SCIFA, 3, 0xe6c70000, evt2irq(0x0c60));
-SH7372_SCIF(PORT_SCIFA, 4, 0xe6c80000, evt2irq(0x0d20));
-SH7372_SCIF(PORT_SCIFA, 5, 0xe6cb0000, evt2irq(0x0d40));
-SH7372_SCIF(PORT_SCIFB, 6, 0xe6c30000, evt2irq(0x0d60));
-
-/* CMT */
-static struct sh_timer_config cmt2_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt2_resources[] = {
- DEFINE_RES_MEM(0xe6130000, 0x50),
- DEFINE_RES_IRQ(evt2irq(0x0b80)),
-};
-
-static struct platform_device cmt2_device = {
- .name = "sh-cmt-32-fast",
- .id = 2,
- .dev = {
- .platform_data = &cmt2_platform_data,
- },
- .resource = cmt2_resources,
- .num_resources = ARRAY_SIZE(cmt2_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfff60000, 0x2c),
- DEFINE_RES_IRQ(intcs_evt2irq(0xe80)),
- DEFINE_RES_IRQ(intcs_evt2irq(0xea0)),
- DEFINE_RES_IRQ(intcs_evt2irq(0xec0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-/* I2C */
-static struct resource iic0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0xFFF20000,
- .end = 0xFFF20425 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0xe00), /* IIC0_ALI0 */
- .end = intcs_evt2irq(0xe60), /* IIC0_DTEI0 */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic0_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic0_resources),
- .resource = iic0_resources,
-};
-
-static struct resource iic1_resources[] = {
- [0] = {
- .name = "IIC1",
- .start = 0xE6C20000,
- .end = 0xE6C20425 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x780), /* IIC1_ALI1 */
- .end = evt2irq(0x7e0), /* IIC1_DTEI1 */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic1_device = {
- .name = "i2c-sh_mobile",
- .id = 1, /* "i2c1" clock */
- .num_resources = ARRAY_SIZE(iic1_resources),
- .resource = iic1_resources,
-};
-
-/* DMA */
-static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF0_TX,
- .addr = 0xe6c40020,
- .chcr = CHCR_TX(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF0_RX,
- .addr = 0xe6c40024,
- .chcr = CHCR_RX(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_TX,
- .addr = 0xe6c50020,
- .chcr = CHCR_TX(XMIT_SZ_8BIT),
- .mid_rid = 0x25,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_RX,
- .addr = 0xe6c50024,
- .chcr = CHCR_RX(XMIT_SZ_8BIT),
- .mid_rid = 0x26,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0xe6c60020,
- .chcr = CHCR_TX(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0xe6c60024,
- .chcr = CHCR_RX(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_TX,
- .addr = 0xe6c70020,
- .chcr = CHCR_TX(XMIT_SZ_8BIT),
- .mid_rid = 0x2d,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_RX,
- .addr = 0xe6c70024,
- .chcr = CHCR_RX(XMIT_SZ_8BIT),
- .mid_rid = 0x2e,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_TX,
- .addr = 0xe6c80020,
- .chcr = CHCR_TX(XMIT_SZ_8BIT),
- .mid_rid = 0x39,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_RX,
- .addr = 0xe6c80024,
- .chcr = CHCR_RX(XMIT_SZ_8BIT),
- .mid_rid = 0x3a,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_TX,
- .addr = 0xe6cb0020,
- .chcr = CHCR_TX(XMIT_SZ_8BIT),
- .mid_rid = 0x35,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_RX,
- .addr = 0xe6cb0024,
- .chcr = CHCR_RX(XMIT_SZ_8BIT),
- .mid_rid = 0x36,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF6_TX,
- .addr = 0xe6c30040,
- .chcr = CHCR_TX(XMIT_SZ_8BIT),
- .mid_rid = 0x3d,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF6_RX,
- .addr = 0xe6c30060,
- .chcr = CHCR_RX(XMIT_SZ_8BIT),
- .mid_rid = 0x3e,
- }, {
- .slave_id = SHDMA_SLAVE_FLCTL0_TX,
- .addr = 0xe6a30050,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0x83,
- }, {
- .slave_id = SHDMA_SLAVE_FLCTL0_RX,
- .addr = 0xe6a30050,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0x83,
- }, {
- .slave_id = SHDMA_SLAVE_FLCTL1_TX,
- .addr = 0xe6a30060,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0x87,
- }, {
- .slave_id = SHDMA_SLAVE_FLCTL1_RX,
- .addr = 0xe6a30060,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0x87,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_TX,
- .addr = 0xe6850030,
- .chcr = CHCR_TX(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_RX,
- .addr = 0xe6850030,
- .chcr = CHCR_RX(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_TX,
- .addr = 0xe6860030,
- .chcr = CHCR_TX(XMIT_SZ_16BIT),
- .mid_rid = 0xc9,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_RX,
- .addr = 0xe6860030,
- .chcr = CHCR_RX(XMIT_SZ_16BIT),
- .mid_rid = 0xca,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI2_TX,
- .addr = 0xe6870030,
- .chcr = CHCR_TX(XMIT_SZ_16BIT),
- .mid_rid = 0xcd,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI2_RX,
- .addr = 0xe6870030,
- .chcr = CHCR_RX(XMIT_SZ_16BIT),
- .mid_rid = 0xce,
- }, {
- .slave_id = SHDMA_SLAVE_FSIA_TX,
- .addr = 0xfe1f0024,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0xb1,
- }, {
- .slave_id = SHDMA_SLAVE_FSIA_RX,
- .addr = 0xfe1f0020,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0xb2,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- .addr = 0xe6bd0034,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0xd1,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- .addr = 0xe6bd0034,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0xd2,
- },
-};
-
-#define SH7372_CHCLR (0x220 - 0x20)
-
-static const struct sh_dmae_channel sh7372_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- .chclr_offset = SH7372_CHCLR + 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- .chclr_offset = SH7372_CHCLR + 0x10,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- .chclr_offset = SH7372_CHCLR + 0x20,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- .chclr_offset = SH7372_CHCLR + 0x30,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- .chclr_offset = SH7372_CHCLR + 0x50,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- .chclr_offset = SH7372_CHCLR + 0x60,
- }
-};
-
-static struct sh_dmae_pdata dma_platform_data = {
- .slave = sh7372_dmae_slaves,
- .slave_num = ARRAY_SIZE(sh7372_dmae_slaves),
- .channel = sh7372_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7372_dmae_channels),
- .ts_low_shift = TS_LOW_SHIFT,
- .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
- .ts_high_shift = TS_HI_SHIFT,
- .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
- .ts_shift = dma_ts_shift,
- .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
- .dmaor_init = DMAOR_DME,
- .chclr_present = 1,
-};
-
-/* Resource order important! */
-static struct resource sh7372_dmae0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00828f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x20c0),
- .end = evt2irq(0x20c0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-5 */
- .start = evt2irq(0x2000),
- .end = evt2irq(0x20a0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* Resource order important! */
-static struct resource sh7372_dmae1_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe018020,
- .end = 0xfe01828f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfe019000,
- .end = 0xfe01900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x21c0),
- .end = evt2irq(0x21c0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-5 */
- .start = evt2irq(0x2100),
- .end = evt2irq(0x21a0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* Resource order important! */
-static struct resource sh7372_dmae2_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe028020,
- .end = 0xfe02828f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfe029000,
- .end = 0xfe02900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x22c0),
- .end = evt2irq(0x22c0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-5 */
- .start = evt2irq(0x2200),
- .end = evt2irq(0x22a0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7372_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7372_dmae0_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7372_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7372_dmae1_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-static struct platform_device dma2_device = {
- .name = "sh-dma-engine",
- .id = 2,
- .resource = sh7372_dmae2_resources,
- .num_resources = ARRAY_SIZE(sh7372_dmae2_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-/*
- * USB-DMAC
- */
-static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = {
- {
- .offset = 0,
- }, {
- .offset = 0x20,
- },
-};
-
-/* USB DMAC0 */
-static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_USB0_TX,
- .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
- }, {
- .slave_id = SHDMA_SLAVE_USB0_RX,
- .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
- },
-};
-
-static struct sh_dmae_pdata usb_dma0_platform_data = {
- .slave = sh7372_usb_dmae0_slaves,
- .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves),
- .channel = sh7372_usb_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
- .ts_low_shift = USBTS_LOW_SHIFT,
- .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT,
- .ts_high_shift = USBTS_HI_SHIFT,
- .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT,
- .ts_shift = dma_usbts_shift,
- .ts_shift_num = ARRAY_SIZE(dma_usbts_shift),
- .dmaor_init = DMAOR_DME,
- .chcr_offset = 0x14,
- .chcr_ie_bit = 1 << 5,
- .dmaor_is_32bit = 1,
- .needs_tend_set = 1,
- .no_dmars = 1,
- .slave_only = 1,
-};
-
-static struct resource sh7372_usb_dmae0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xe68a0020,
- .end = 0xe68a0064 - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* VCR/SWR/DMICR */
- .start = 0xe68a0000,
- .end = 0xe68a0014 - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* IRQ for channels */
- .start = evt2irq(0x0a00),
- .end = evt2irq(0x0a00),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_dma0_device = {
- .name = "sh-dma-engine",
- .id = 3,
- .resource = sh7372_usb_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources),
- .dev = {
- .platform_data = &usb_dma0_platform_data,
- },
-};
-
-/* USB DMAC1 */
-static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_USB1_TX,
- .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
- }, {
- .slave_id = SHDMA_SLAVE_USB1_RX,
- .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
- },
-};
-
-static struct sh_dmae_pdata usb_dma1_platform_data = {
- .slave = sh7372_usb_dmae1_slaves,
- .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves),
- .channel = sh7372_usb_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
- .ts_low_shift = USBTS_LOW_SHIFT,
- .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT,
- .ts_high_shift = USBTS_HI_SHIFT,
- .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT,
- .ts_shift = dma_usbts_shift,
- .ts_shift_num = ARRAY_SIZE(dma_usbts_shift),
- .dmaor_init = DMAOR_DME,
- .chcr_offset = 0x14,
- .chcr_ie_bit = 1 << 5,
- .dmaor_is_32bit = 1,
- .needs_tend_set = 1,
- .no_dmars = 1,
- .slave_only = 1,
-};
-
-static struct resource sh7372_usb_dmae1_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xe68c0020,
- .end = 0xe68c0064 - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* VCR/SWR/DMICR */
- .start = 0xe68c0000,
- .end = 0xe68c0014 - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* IRQ for channels */
- .start = evt2irq(0x1d00),
- .end = evt2irq(0x1d00),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_dma1_device = {
- .name = "sh-dma-engine",
- .id = 4,
- .resource = sh7372_usb_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources),
- .dev = {
- .platform_data = &usb_dma1_platform_data,
- },
-};
-
-/* VPU */
-static struct uio_info vpu_platform_data = {
- .name = "VPU5HG",
- .version = "0",
- .irq = intcs_evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe900157,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-/* VEU0 */
-static struct uio_info veu0_platform_data = {
- .name = "VEU0",
- .version = "0",
- .irq = intcs_evt2irq(0x700),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU0",
- .start = 0xfe920000,
- .end = 0xfe9200cb,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-/* VEU1 */
-static struct uio_info veu1_platform_data = {
- .name = "VEU1",
- .version = "0",
- .irq = intcs_evt2irq(0x720),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU1",
- .start = 0xfe924000,
- .end = 0xfe9240cb,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-/* VEU2 */
-static struct uio_info veu2_platform_data = {
- .name = "VEU2",
- .version = "0",
- .irq = intcs_evt2irq(0x740),
-};
-
-static struct resource veu2_resources[] = {
- [0] = {
- .name = "VEU2",
- .start = 0xfe928000,
- .end = 0xfe928307,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device veu2_device = {
- .name = "uio_pdrv_genirq",
- .id = 3,
- .dev = {
- .platform_data = &veu2_platform_data,
- },
- .resource = veu2_resources,
- .num_resources = ARRAY_SIZE(veu2_resources),
-};
-
-/* VEU3 */
-static struct uio_info veu3_platform_data = {
- .name = "VEU3",
- .version = "0",
- .irq = intcs_evt2irq(0x760),
-};
-
-static struct resource veu3_resources[] = {
- [0] = {
- .name = "VEU3",
- .start = 0xfe92c000,
- .end = 0xfe92c307,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device veu3_device = {
- .name = "uio_pdrv_genirq",
- .id = 4,
- .dev = {
- .platform_data = &veu3_platform_data,
- },
- .resource = veu3_resources,
- .num_resources = ARRAY_SIZE(veu3_resources),
-};
-
-/* JPU */
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = intcs_evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfe980000,
- .end = 0xfe9902d3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 5,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-/* SPU2DSP0 */
-static struct uio_info spu0_platform_data = {
- .name = "SPU2DSP0",
- .version = "0",
- .irq = evt2irq(0x1800),
-};
-
-static struct resource spu0_resources[] = {
- [0] = {
- .name = "SPU2DSP0",
- .start = 0xfe200000,
- .end = 0xfe2fffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device spu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 6,
- .dev = {
- .platform_data = &spu0_platform_data,
- },
- .resource = spu0_resources,
- .num_resources = ARRAY_SIZE(spu0_resources),
-};
-
-/* SPU2DSP1 */
-static struct uio_info spu1_platform_data = {
- .name = "SPU2DSP1",
- .version = "0",
- .irq = evt2irq(0x1820),
-};
-
-static struct resource spu1_resources[] = {
- [0] = {
- .name = "SPU2DSP1",
- .start = 0xfe300000,
- .end = 0xfe3fffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device spu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 7,
- .dev = {
- .platform_data = &spu1_platform_data,
- },
- .resource = spu1_resources,
- .num_resources = ARRAY_SIZE(spu1_resources),
-};
-
-/* IPMMUI (an IPMMU module for ICB/LMB) */
-static struct resource ipmmu_resources[] = {
- [0] = {
- .name = "IPMMUI",
- .start = 0xfe951000,
- .end = 0xfe9510ff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static const char * const ipmmu_dev_names[] = {
- "sh_mobile_lcdc_fb.0",
- "sh_mobile_lcdc_fb.1",
- "sh_mobile_ceu.0",
- "uio_pdrv_genirq.0",
- "uio_pdrv_genirq.1",
- "uio_pdrv_genirq.2",
- "uio_pdrv_genirq.3",
- "uio_pdrv_genirq.4",
- "uio_pdrv_genirq.5",
-};
-
-static struct shmobile_ipmmu_platform_data ipmmu_platform_data = {
- .dev_names = ipmmu_dev_names,
- .num_dev_names = ARRAY_SIZE(ipmmu_dev_names),
-};
-
-static struct platform_device ipmmu_device = {
- .name = "ipmmu",
- .id = -1,
- .dev = {
- .platform_data = &ipmmu_platform_data,
- },
- .resource = ipmmu_resources,
- .num_resources = ARRAY_SIZE(ipmmu_resources),
-};
-
-static struct platform_device *sh7372_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &cmt2_device,
- &tmu0_device,
- &ipmmu_device,
-};
-
-static struct platform_device *sh7372_late_devices[] __initdata = {
- &iic0_device,
- &iic1_device,
- &dma0_device,
- &dma1_device,
- &dma2_device,
- &usb_dma0_device,
- &usb_dma1_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
- &veu2_device,
- &veu3_device,
- &jpu_device,
- &spu0_device,
- &spu1_device,
-};
-
-void __init sh7372_add_standard_devices(void)
-{
- static struct pm_domain_device domain_devices[] __initdata = {
- { "A3RV", &vpu_device, },
- { "A4MP", &spu0_device, },
- { "A4MP", &spu1_device, },
- { "A3SP", &scif0_device, },
- { "A3SP", &scif1_device, },
- { "A3SP", &scif2_device, },
- { "A3SP", &scif3_device, },
- { "A3SP", &scif4_device, },
- { "A3SP", &scif5_device, },
- { "A3SP", &scif6_device, },
- { "A3SP", &iic1_device, },
- { "A3SP", &dma0_device, },
- { "A3SP", &dma1_device, },
- { "A3SP", &dma2_device, },
- { "A3SP", &usb_dma0_device, },
- { "A3SP", &usb_dma1_device, },
- { "A4R", &iic0_device, },
- { "A4R", &veu0_device, },
- { "A4R", &veu1_device, },
- { "A4R", &veu2_device, },
- { "A4R", &veu3_device, },
- { "A4R", &jpu_device, },
- { "A4R", &tmu0_device, },
- };
-
- sh7372_init_pm_domains();
-
- platform_add_devices(sh7372_early_devices,
- ARRAY_SIZE(sh7372_early_devices));
-
- platform_add_devices(sh7372_late_devices,
- ARRAY_SIZE(sh7372_late_devices));
-
- rmobile_add_devices_to_domains(domain_devices,
- ARRAY_SIZE(domain_devices));
-}
-
-void __init sh7372_earlytimer_init(void)
-{
- sh7372_clock_init();
- shmobile_earlytimer_init();
-}
-
-void __init sh7372_add_early_devices(void)
-{
- early_platform_add_devices(sh7372_early_devices,
- ARRAY_SIZE(sh7372_early_devices));
-
- /* setup early console here as well */
- shmobile_setup_console();
-}
-
-#ifdef CONFIG_USE_OF
-
-void __init sh7372_add_early_devices_dt(void)
-{
- shmobile_init_delay();
-
- sh7372_add_early_devices();
-}
-
-void __init sh7372_add_standard_devices_dt(void)
-{
- /* clocks are setup late during boot in the case of DT */
- sh7372_clock_init();
-
- platform_add_devices(sh7372_early_devices,
- ARRAY_SIZE(sh7372_early_devices));
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *sh7372_boards_compat_dt[] __initdata = {
- "renesas,sh7372",
- NULL,
-};
-
-DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
- .map_io = sh7372_map_io,
- .init_early = sh7372_add_early_devices_dt,
- .init_irq = sh7372_init_irq,
- .handle_irq = shmobile_handle_irq_intc,
- .init_machine = sh7372_add_standard_devices_dt,
- .init_late = shmobile_init_late,
- .dt_compat = sh7372_boards_compat_dt,
-MACHINE_END
-
-#endif /* CONFIG_USE_OF */
#include <linux/platform_data/sh_ipmmu.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#ifdef CONFIG_USE_OF
-void __init sh73a0_add_standard_devices_dt(void)
+static void __init sh73a0_generic_init(void)
{
- /* clocks are setup late during boot in the case of DT */
-#ifndef CONFIG_COMMON_CLK
- sh73a0_clock_init();
+#ifdef CONFIG_CACHE_L2X0
+ /* Shared attribute override enable, 64K*8way */
+ l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-#define RESCNT2 IOMEM(0xe6188020)
-static void sh73a0_restart(enum reboot_mode mode, const char *cmd)
-{
- /* Do soft power on reset */
- writel((1 << 31), RESCNT2);
-}
-
static const char *sh73a0_boards_compat_dt[] __initdata = {
"renesas,sh73a0",
NULL,
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = shmobile_init_delay,
- .init_machine = sh73a0_add_standard_devices_dt,
+ .init_machine = sh73a0_generic_init,
.init_late = shmobile_init_late,
- .restart = sh73a0_restart,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
+++ /dev/null
-/*
- * Copyright (C) 2010 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_SH7372_H__
-#define __ASM_SH7372_H__
-
-/* DMA slave IDs */
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_SCIF5_TX,
- SHDMA_SLAVE_SCIF5_RX,
- SHDMA_SLAVE_SCIF6_TX,
- SHDMA_SLAVE_SCIF6_RX,
- SHDMA_SLAVE_FLCTL0_TX,
- SHDMA_SLAVE_FLCTL0_RX,
- SHDMA_SLAVE_FLCTL1_TX,
- SHDMA_SLAVE_FLCTL1_RX,
- SHDMA_SLAVE_SDHI0_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI1_RX,
- SHDMA_SLAVE_SDHI1_TX,
- SHDMA_SLAVE_SDHI2_RX,
- SHDMA_SLAVE_SDHI2_TX,
- SHDMA_SLAVE_FSIA_RX,
- SHDMA_SLAVE_FSIA_TX,
- SHDMA_SLAVE_MMCIF_RX,
- SHDMA_SLAVE_MMCIF_TX,
- SHDMA_SLAVE_USB0_TX,
- SHDMA_SLAVE_USB0_RX,
- SHDMA_SLAVE_USB1_TX,
- SHDMA_SLAVE_USB1_RX,
-};
-
-extern struct clk sh7372_extal1_clk;
-extern struct clk sh7372_extal2_clk;
-extern struct clk sh7372_dv_clki_clk;
-extern struct clk sh7372_dv_clki_div2_clk;
-extern struct clk sh7372_pllc2_clk;
-
-extern void sh7372_init_irq(void);
-extern void sh7372_map_io(void);
-extern void sh7372_earlytimer_init(void);
-extern void sh7372_add_early_devices(void);
-extern void sh7372_add_standard_devices(void);
-extern void sh7372_add_early_devices_dt(void);
-extern void sh7372_add_standard_devices_dt(void);
-extern void sh7372_clock_init(void);
-extern void sh7372_pinmux_init(void);
-extern void sh7372_pm_init(void);
-extern void sh7372_resume_core_standby_sysc(void);
-extern int sh7372_do_idle_sysc(unsigned long sleep_mode);
-extern void sh7372_intcs_suspend(void);
-extern void sh7372_intcs_resume(void);
-extern void sh7372_intca_suspend(void);
-extern void sh7372_intca_resume(void);
-
-extern unsigned long sh7372_cpu_resume;
-
-#ifdef CONFIG_PM
-extern void __init sh7372_init_pm_domains(void);
-#else
-static inline void sh7372_init_pm_domains(void) {}
-#endif
-
-extern void __init sh7372_pm_init_late(void);
-
-#endif /* __ASM_SH7372_H__ */
extern void sh73a0_earlytimer_init(void);
extern void sh73a0_add_early_devices(void);
extern void sh73a0_add_standard_devices(void);
-extern void sh73a0_add_standard_devices_dt(void);
extern void sh73a0_clock_init(void);
extern void sh73a0_pinmux_init(void);
extern void sh73a0_pm_init(void);
+++ /dev/null
-/*
- * sh7372 lowlevel sleep code for "Core Standby Mode"
- *
- * Copyright (C) 2011 Magnus Damm
- *
- * In "Core Standby Mode" the ARM core is off, but L2 cache is still on
- *
- * Based on mach-omap2/sleep34xx.S
- *
- * (C) Copyright 2007 Texas Instruments
- * Karthik Dasu <karthik-dp@ti.com>
- *
- * (C) Copyright 2004 Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-#include <asm/assembler.h>
-
-#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
- .align 12
- .text
- .global sh7372_resume_core_standby_sysc
-sh7372_resume_core_standby_sysc:
- ldr pc, 1f
-
- .align 2
- .globl sh7372_cpu_resume
-sh7372_cpu_resume:
-1: .space 4
-
-#define SPDCR 0xe6180008
-
- /* A3SM & A4S power down */
- .global sh7372_do_idle_sysc
-sh7372_do_idle_sysc:
- mov r8, r0 /* sleep mode passed in r0 */
-
- /*
- * Clear the SCTLR.C bit to prevent further data cache
- * allocation. Clearing SCTLR.C would make all the data accesses
- * strongly ordered and would not hit the cache.
- */
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #(1 << 2) @ Disable the C bit
- mcr p15, 0, r0, c1, c0, 0
- isb
-
- /*
- * Clean and invalidate data cache again.
- */
- ldr r1, kernel_flush
- blx r1
-
- /* disable L2 cache in the aux control register */
- mrc p15, 0, r10, c1, c0, 1
- bic r10, r10, #2
- mcr p15, 0, r10, c1, c0, 1
- isb
-
- /*
- * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
- * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
- * This sequence switches back to ARM. Note that .align may insert a
- * nop: bx pc needs to be word-aligned in order to work.
- */
- THUMB( .thumb )
- THUMB( .align )
- THUMB( bx pc )
- THUMB( nop )
- .arm
-
- /* Data memory barrier and Data sync barrier */
- dsb
- dmb
-
- /* SYSC power down */
- ldr r0, =SPDCR
- str r8, [r0]
-1:
- b 1b
-
- .align 2
-kernel_flush:
- .word v7_flush_dcache_all
-#endif
return 0;
}
-
-static int r8a7779_cpu_disable(unsigned int cpu)
-{
- /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */
- return cpu == 0 ? -EPERM : 0;
-}
#endif /* CONFIG_HOTPLUG_CPU */
struct smp_operations r8a7779_smp_ops __initdata = {
.smp_prepare_cpus = r8a7779_smp_prepare_cpus,
.smp_boot_secondary = r8a7779_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
- .cpu_disable = r8a7779_cpu_disable,
.cpu_die = shmobile_smp_scu_cpu_die,
.cpu_kill = r8a7779_cpu_kill,
#endif
#define SH73A0_SCU_BASE 0xf0000000
-#ifdef CONFIG_HAVE_ARM_TWD
+#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
void __init sh73a0_register_twd(void)
{
ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
trimslice MACH_TRIMSLICE TRIMSLICE 3209
-mackerel MACH_MACKEREL MACKEREL 3211
kaen MACH_KAEN KAEN 3217
nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230
obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
--- /dev/null
+/*
+ * r8a7778 Core CPG Clocks
+ *
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/of_address.h>
+
+struct r8a7778_cpg {
+ struct clk_onecell_data data;
+ spinlock_t lock;
+ void __iomem *reg;
+};
+
+/* PLL multipliers per bits 11, 12, and 18 of MODEMR */
+struct {
+ unsigned long plla_mult;
+ unsigned long pllb_mult;
+} r8a7778_rates[] __initdata = {
+ [0] = { 21, 21 },
+ [1] = { 24, 24 },
+ [2] = { 28, 28 },
+ [3] = { 32, 32 },
+ [5] = { 24, 21 },
+ [6] = { 28, 21 },
+ [7] = { 32, 24 },
+};
+
+/* Clock dividers per bits 1 and 2 of MODEMR */
+struct {
+ const char *name;
+ unsigned int div[4];
+} r8a7778_divs[6] __initdata = {
+ { "b", { 12, 12, 16, 18 } },
+ { "out", { 12, 12, 16, 18 } },
+ { "p", { 16, 12, 16, 12 } },
+ { "s", { 4, 3, 4, 3 } },
+ { "s1", { 8, 6, 8, 6 } },
+};
+
+static u32 cpg_mode_rates __initdata;
+static u32 cpg_mode_divs __initdata;
+
+static struct clk * __init
+r8a7778_cpg_register_clock(struct device_node *np, struct r8a7778_cpg *cpg,
+ const char *name)
+{
+ if (!strcmp(name, "plla")) {
+ return clk_register_fixed_factor(NULL, "plla",
+ of_clk_get_parent_name(np, 0), 0,
+ r8a7778_rates[cpg_mode_rates].plla_mult, 1);
+ } else if (!strcmp(name, "pllb")) {
+ return clk_register_fixed_factor(NULL, "pllb",
+ of_clk_get_parent_name(np, 0), 0,
+ r8a7778_rates[cpg_mode_rates].pllb_mult, 1);
+ } else {
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(r8a7778_divs); i++) {
+ if (!strcmp(name, r8a7778_divs[i].name)) {
+ return clk_register_fixed_factor(NULL,
+ r8a7778_divs[i].name,
+ "plla", 0, 1,
+ r8a7778_divs[i].div[cpg_mode_divs]);
+ }
+ }
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+
+static void __init r8a7778_cpg_clocks_init(struct device_node *np)
+{
+ struct r8a7778_cpg *cpg;
+ struct clk **clks;
+ unsigned int i;
+ int num_clks;
+
+ num_clks = of_property_count_strings(np, "clock-output-names");
+ if (num_clks < 0) {
+ pr_err("%s: failed to count clocks\n", __func__);
+ return;
+ }
+
+ cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+ clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
+ if (cpg == NULL || clks == NULL) {
+ /* We're leaking memory on purpose, there's no point in cleaning
+ * up as the system won't boot anyway.
+ */
+ return;
+ }
+
+ spin_lock_init(&cpg->lock);
+
+ cpg->data.clks = clks;
+ cpg->data.clk_num = num_clks;
+
+ cpg->reg = of_iomap(np, 0);
+ if (WARN_ON(cpg->reg == NULL))
+ return;
+
+ for (i = 0; i < num_clks; ++i) {
+ const char *name;
+ struct clk *clk;
+
+ of_property_read_string_index(np, "clock-output-names", i,
+ &name);
+
+ clk = r8a7778_cpg_register_clock(np, cpg, name);
+ if (IS_ERR(clk))
+ pr_err("%s: failed to register %s %s clock (%ld)\n",
+ __func__, np->name, name, PTR_ERR(clk));
+ else
+ cpg->data.clks[i] = clk;
+ }
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+
+CLK_OF_DECLARE(r8a7778_cpg_clks, "renesas,r8a7778-cpg-clocks",
+ r8a7778_cpg_clocks_init);
+
+void __init r8a7778_clocks_init(u32 mode)
+{
+ BUG_ON(!(mode & BIT(19)));
+
+ cpg_mode_rates = (!!(mode & BIT(18)) << 2) |
+ (!!(mode & BIT(12)) << 1) |
+ (!!(mode & BIT(11)));
+ cpg_mode_divs = (!!(mode & BIT(2)) << 1) |
+ (!!(mode & BIT(1)));
+
+ of_clk_init(NULL);
+}
--- /dev/null
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A73A4_H__
+#define __DT_BINDINGS_CLOCK_R8A73A4_H__
+
+/* CPG */
+#define R8A73A4_CLK_MAIN 0
+#define R8A73A4_CLK_PLL0 1
+#define R8A73A4_CLK_PLL1 2
+#define R8A73A4_CLK_PLL2 3
+#define R8A73A4_CLK_PLL2S 4
+#define R8A73A4_CLK_PLL2H 5
+#define R8A73A4_CLK_Z 6
+#define R8A73A4_CLK_Z2 7
+#define R8A73A4_CLK_I 8
+#define R8A73A4_CLK_M3 9
+#define R8A73A4_CLK_B 10
+#define R8A73A4_CLK_M1 11
+#define R8A73A4_CLK_M2 12
+#define R8A73A4_CLK_ZX 13
+#define R8A73A4_CLK_ZS 14
+#define R8A73A4_CLK_HP 15
+
+/* MSTP2 */
+#define R8A73A4_CLK_DMAC 18
+#define R8A73A4_CLK_SCIFB3 17
+#define R8A73A4_CLK_SCIFB2 16
+#define R8A73A4_CLK_SCIFB1 7
+#define R8A73A4_CLK_SCIFB0 6
+#define R8A73A4_CLK_SCIFA0 4
+#define R8A73A4_CLK_SCIFA1 3
+
+/* MSTP3 */
+#define R8A73A4_CLK_CMT1 29
+#define R8A73A4_CLK_IIC1 23
+#define R8A73A4_CLK_IIC0 18
+#define R8A73A4_CLK_IIC7 17
+#define R8A73A4_CLK_IIC6 16
+#define R8A73A4_CLK_MMCIF0 15
+#define R8A73A4_CLK_SDHI0 14
+#define R8A73A4_CLK_SDHI1 13
+#define R8A73A4_CLK_SDHI2 12
+#define R8A73A4_CLK_MMCIF1 5
+#define R8A73A4_CLK_IIC2 0
+
+/* MSTP4 */
+#define R8A73A4_CLK_IIC3 11
+#define R8A73A4_CLK_IIC4 10
+#define R8A73A4_CLK_IIC5 9
+
+/* MSTP5 */
+#define R8A73A4_CLK_THERMAL 22
+#define R8A73A4_CLK_IIC8 15
+
+#endif /* __DT_BINDINGS_CLOCK_R8A73A4_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7778_H__
+#define __DT_BINDINGS_CLOCK_R8A7778_H__
+
+/* CPG */
+#define R8A7778_CLK_PLLA 0
+#define R8A7778_CLK_PLLB 1
+#define R8A7778_CLK_B 2
+#define R8A7778_CLK_OUT 3
+#define R8A7778_CLK_P 4
+#define R8A7778_CLK_S 5
+#define R8A7778_CLK_S1 6
+
+/* MSTP0 */
+#define R8A7778_CLK_I2C0 30
+#define R8A7778_CLK_I2C1 29
+#define R8A7778_CLK_I2C2 28
+#define R8A7778_CLK_I2C3 27
+#define R8A7778_CLK_SCIF0 26
+#define R8A7778_CLK_SCIF1 25
+#define R8A7778_CLK_SCIF2 24
+#define R8A7778_CLK_SCIF3 23
+#define R8A7778_CLK_SCIF4 22
+#define R8A7778_CLK_SCIF5 21
+#define R8A7778_CLK_TMU0 16
+#define R8A7778_CLK_TMU1 15
+#define R8A7778_CLK_TMU2 14
+#define R8A7778_CLK_SSI0 12
+#define R8A7778_CLK_SSI1 11
+#define R8A7778_CLK_SSI2 10
+#define R8A7778_CLK_SSI3 9
+#define R8A7778_CLK_SRU 8
+#define R8A7778_CLK_HSPI 7
+
+/* MSTP1 */
+#define R8A7778_CLK_ETHER 14
+#define R8A7778_CLK_VIN0 10
+#define R8A7778_CLK_VIN1 9
+#define R8A7778_CLK_USB 0
+
+/* MSTP3 */
+#define R8A7778_CLK_MMC 31
+#define R8A7778_CLK_SDHI0 23
+#define R8A7778_CLK_SDHI1 22
+#define R8A7778_CLK_SDHI2 21
+#define R8A7778_CLK_SSI4 11
+#define R8A7778_CLK_SSI5 10
+#define R8A7778_CLK_SSI6 9
+#define R8A7778_CLK_SSI7 8
+#define R8A7778_CLK_SSI8 7
+
+/* MSTP5 */
+#define R8A7778_CLK_SRU_SRC0 31
+#define R8A7778_CLK_SRU_SRC1 30
+#define R8A7778_CLK_SRU_SRC2 29
+#define R8A7778_CLK_SRU_SRC3 28
+#define R8A7778_CLK_SRU_SRC4 27
+#define R8A7778_CLK_SRU_SRC5 26
+#define R8A7778_CLK_SRU_SRC6 25
+#define R8A7778_CLK_SRU_SRC7 24
+#define R8A7778_CLK_SRU_SRC8 23
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7778_H__ */
#include <linux/types.h>
+void r8a7778_clocks_init(u32 mode);
void r8a7779_clocks_init(u32 mode);
void rcar_gen2_clocks_init(u32 mode);
projects / karo-tx-linux.git / commitdiff