kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
kirkwood-iomega_ix2_200.dtb \
+ kirkwood-is2.dtb \
kirkwood-km_kirkwood.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
+ kirkwood-ns2.dtb \
+ kirkwood-ns2max.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
--- /dev/null
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+ model = "LaCie Internet Space v2";
+ compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+ };
+
+ ns2-leds {
+ compatible = "lacie,ns2-leds";
+
+ blue-sata {
+ label = "ns2:blue:sata";
+ slow-gpio = <&gpio0 29 0>;
+ cmd-gpio = <&gpio0 30 0>;
+ };
+ };
+};
--- /dev/null
+/include/ "kirkwood.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ clock-frequency = <166666667>;
+ status = "okay";
+ };
+
+ spi@10600 {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l4005a";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "at,24c04";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Power push button";
+ linux,code = <116>;
+ gpios = <&gpio1 0 0>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-fail {
+ label = "ns2:red:fail";
+ gpios = <&gpio0 12 0>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+ model = "LaCie Network Space v2";
+ compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+ };
+
+ ns2-leds {
+ compatible = "lacie,ns2-leds";
+
+ blue-sata {
+ label = "ns2:blue:sata";
+ slow-gpio = <&gpio0 29 0>;
+ cmd-gpio = <&gpio0 30 0>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+ model = "LaCie Network Space Max v2";
+ compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+
+ gpio_fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio0 22 1
+ &gpio0 7 1
+ &gpio1 1 1
+ &gpio0 23 1>;
+ gpio-fan,speed-map =
+ < 0 0
+ 1500 15
+ 1700 14
+ 1800 13
+ 2100 12
+ 3100 11
+ 3300 10
+ 4300 9
+ 5500 8>;
+ alarm-gpios = <&gpio0 25 1>;
+ };
+
+ ns2-leds {
+ compatible = "lacie,ns2-leds";
+
+ blue-sata {
+ label = "ns2:blue:sata";
+ slow-gpio = <&gpio0 29 0>;
+ cmd-gpio = <&gpio0 30 0>;
+ };
+ };
+};
Say 'Y' here if you want your kernel to support the
Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+config MACH_INETSPACE_V2_DT
+ bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Internet Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_V2_DT
+ bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MAX_V2_DT
+ bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space Max v2 NAS, using Flattened Device Tree.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
+obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
+ if (of_machine_is_compatible("lacie,inetspace_v2") ||
+ of_machine_is_compatible("lacie,netspace_v2") ||
+ of_machine_is_compatible("lacie,netspace_max_v2"))
+ ns2_init();
+
of_platform_populate(NULL, kirkwood_dt_match_table,
kirkwood_auxdata_lookup, NULL);
}
"buffalo,lsxl",
"iom,ix2-200",
"keymile,km_kirkwood",
+ "lacie,inetspace_v2",
+ "lacie,netspace_max_v2",
+ "lacie,netspace_v2",
NULL
};
--- /dev/null
+/*
+ * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * arch/arm/mach-kirkwood/board-ns2.c
+ *
+ * LaCie Network Space v2 board (and parents) initialization for drivers
+ * not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data ns2_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int ns2_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* Fan speed (bit 1) */
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO, /* Red led */
+ MPP14_GPIO, /* USB fuse */
+ MPP16_GPIO, /* SATA 0 power */
+ MPP17_GPIO, /* SATA 1 power */
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_SATA1_ACTn,
+ MPP21_SATA0_ACTn,
+ MPP22_GPIO, /* Fan speed (bit 0) */
+ MPP23_GPIO, /* Fan power */
+ MPP24_GPIO, /* USB mode select */
+ MPP25_GPIO, /* Fan rotation fail */
+ MPP26_GPIO, /* USB device vbus */
+ MPP28_GPIO, /* USB enable host vbus */
+ MPP29_GPIO, /* Blue led (slow register) */
+ MPP30_GPIO, /* Blue led (command register) */
+ MPP31_GPIO, /* Board power off */
+ MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
+ MPP33_GPO, /* Fan speed (bit 2) */
+ 0
+};
+
+#define NS2_GPIO_POWER_OFF 31
+
+static void ns2_power_off(void)
+{
+ gpio_set_value(NS2_GPIO_POWER_OFF, 1);
+}
+
+void __init ns2_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(ns2_mpp_config);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&ns2_ge00_data);
+
+ if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = ns2_power_off;
+ else
+ pr_err("ns2: failed to configure power-off GPIO\n");
+}
static inline void km_kirkwood_init(void) {};
#endif
+#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
+ defined(CONFIG_MACH_NETSPACE_V2_DT) || \
+ defined(CONFIG_MACH_NETSPACE_MAX_V2_DT)
+void ns2_init(void);
+#else
+static inline void ns2_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
- MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2
+ MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 || \
+ MACH_NETSPACE_V2_DT || MACH_INETSPACE_V2_DT || \
+ MACH_NETSPACE_MAX_V2_DT
default y
help
This option enable support for the dual-GPIO LED found on the
projects / karo-tx-linux.git / commitdiff