.PP
.SH FIELD DESCRIPTIONS
.nf
-\fBpk\fP processor package number.
-\fBcor\fP processor core number.
+\fBPackage\fP processor package number.
+\fBCore\fP processor core number.
\fBCPU\fP Linux CPU (logical processor) number.
Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology.
-\fB%c0\fP percent of the interval that the CPU retired instructions.
-\fBGHz\fP average clock rate while the CPU was in c0 state.
-\fBTSC\fP average GHz that the TSC ran during the entire interval.
-\fB%c1, %c3, %c6, %c7\fP show the percentage residency in hardware core idle states.
-\fBCTMP\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
-\fBPTMP\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
-\fB%pc2, %pc3, %pc6, %pc7\fP percentage residency in hardware package idle states.
-\fBPkg_W\fP Watts consumed by the whole package.
-\fBCor_W\fP Watts consumed by the core part of the package.
-\fBGFX_W\fP Watts consumed by the Graphics part of the package -- available only on client processors.
-\fBRAM_W\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
+\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
+\fB%Buzy\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
+\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
+\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
+\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
+\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
+\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
+\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
+\fBPkgWatt\fP Watts consumed by the whole package.
+\fBCorWatt\fP Watts consumed by the core part of the package.
+\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
+\fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
.fi
Subsequent rows show per-CPU statistics.
.nf
-[root@sandy]# ./turbostat
-cor CPU %c0 GHz TSC %c1 %c3 %c6 %c7 CTMP PTMP %pc2 %pc3 %pc6 %pc7 Pkg_W Cor_W GFX_W
- 0.06 0.80 2.29 0.11 0.00 0.00 99.83 47 40 0.26 0.01 0.44 98.78 3.49 0.12 0.14
- 0 0 0.07 0.80 2.29 0.07 0.00 0.00 99.86 40 40 0.26 0.01 0.44 98.78 3.49 0.12 0.14
- 0 4 0.03 0.80 2.29 0.12
- 1 1 0.04 0.80 2.29 0.25 0.01 0.00 99.71 40
- 1 5 0.16 0.80 2.29 0.13
- 2 2 0.05 0.80 2.29 0.06 0.01 0.00 99.88 40
- 2 6 0.03 0.80 2.29 0.08
- 3 3 0.05 0.80 2.29 0.08 0.00 0.00 99.87 47
- 3 7 0.04 0.84 2.29 0.09
-.fi
-.SH SUMMARY EXAMPLE
-The "-s" option prints the column headers just once,
-and then the one line system summary for each sample interval.
-
-.nf
-[root@wsm]# turbostat -S
- %c0 GHz TSC %c1 %c3 %c6 CTMP %pc3 %pc6
- 1.40 2.81 3.38 10.78 43.47 44.35 42 13.67 2.09
- 1.34 2.90 3.38 11.48 58.96 28.23 41 19.89 0.15
- 1.55 2.72 3.38 26.73 37.66 34.07 42 2.53 2.80
- 1.37 2.83 3.38 16.95 60.05 21.63 42 5.76 0.20
+[root@ivy]# ./turbostat
+ Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ - - 6 0.36 1596 3492 0 0.59 0.01 99.04 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
+ 0 0 9 0.58 1596 3492 0 0.28 0.01 99.13 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
+ 0 4 1 0.07 1596 3492 0 0.79
+ 1 1 10 0.65 1596 3492 0 0.59 0.00 98.76 0.00 23
+ 1 5 5 0.28 1596 3492 0 0.95
+ 2 2 10 0.66 1596 3492 0 0.41 0.01 98.92 0.00 23
+ 2 6 2 0.10 1597 3492 0 0.97
+ 3 3 3 0.20 1596 3492 0 0.44 0.00 99.37 0.00 23
+ 3 7 5 0.31 1596 3492 0 0.33
.fi
.SH VERBOSE EXAMPLE
The "-v" option adds verbosity to the output:
until ^C while the other CPUs are mostly idle:
.nf
-[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
+root@ivy: turbostat cat /dev/zero > /dev/null
^C
-cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 8.86 3.61 3.38 15.06 31.19 44.89 0.00 0.00
- 0 0 1.46 3.22 3.38 16.84 29.48 52.22 0.00 0.00
- 0 6 0.21 3.06 3.38 18.09
- 1 2 0.53 3.33 3.38 2.80 46.40 50.27
- 1 8 0.89 3.47 3.38 2.44
- 2 4 1.36 3.43 3.38 9.04 23.71 65.89
- 2 10 0.18 2.86 3.38 10.22
- 8 1 0.04 2.87 3.38 99.96 0.01 0.00
- 8 7 99.72 3.63 3.38 0.27
- 9 3 0.31 3.21 3.38 7.64 56.55 35.50
- 9 9 0.08 2.95 3.38 7.88
- 10 5 1.42 3.43 3.38 2.14 30.99 65.44
- 10 11 0.16 2.88 3.38 3.40
+ Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ - - 496 12.75 3886 3492 0 13.16 0.04 74.04 0.00 36 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
+ 0 0 22 0.57 3830 3492 0 0.83 0.02 98.59 0.00 27 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
+ 0 4 9 0.24 3829 3492 0 1.15
+ 1 1 4 0.09 3783 3492 0 99.91 0.00 0.00 0.00 36
+ 1 5 3880 99.82 3888 3492 0 0.18
+ 2 2 17 0.44 3813 3492 0 0.77 0.04 98.75 0.00 28
+ 2 6 12 0.32 3823 3492 0 0.89
+ 3 3 16 0.43 3844 3492 0 0.63 0.11 98.84 0.00 30
+ 3 7 4 0.11 3827 3492 0 0.94
+30.372243 sec
+
.fi
-Above the cycle soaker drives cpu7 up its 3.6 GHz turbo limit
+Above the cycle soaker drives cpu5 up its 3.8 GHz turbo limit
while the other processors are generally in various states of idle.
-Note that cpu1 and cpu7 are HT siblings within core8.
-As cpu7 is very busy, it prevents its sibling, cpu1,
+Note that cpu1 and cpu5 are HT siblings within core1.
+As cpu5 is very busy, it prevents its sibling, cpu1,
from entering a c-state deeper than c1.
-Note that turbostat reports average GHz of 3.63, while
-the arithmetic average of the GHz column above is lower.
-This is a weighted average, where the weight is %c0. ie. it is the total number of
-un-halted cycles elapsed per time divided by the number of CPUs.
-.SH SMI COUNTING EXAMPLE
-On Intel Nehalem and newer processors, MSR 0x34 is a System Management Mode Interrupt (SMI) counter.
-This counter is shown by default under the "SMI" column.
-.nf
-[root@x980 ~]# turbostat
-cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 CTMP %pc3 %pc6
- 0.11 1.91 3.38 0 1.84 0.26 97.79 29 0.82 83.87
- 0 0 0.40 1.63 3.38 0 10.27 0.12 89.20 20 0.82 83.88
- 0 6 0.06 1.63 3.38 0 10.61
- 1 2 0.37 2.63 3.38 0 0.02 0.10 99.51 22
- 1 8 0.01 1.62 3.38 0 0.39
- 2 4 0.07 1.62 3.38 0 0.04 0.07 99.82 23
- 2 10 0.02 1.62 3.38 0 0.09
- 8 1 0.23 1.64 3.38 0 0.10 1.07 98.60 24
- 8 7 0.02 1.64 3.38 0 0.31
- 9 3 0.03 1.62 3.38 0 0.03 0.05 99.89 29
- 9 9 0.02 1.62 3.38 0 0.05
- 10 5 0.07 1.62 3.38 0 0.08 0.12 99.73 27
- 10 11 0.03 1.62 3.38 0 0.13
-^C
-.fi
+Note that the Avg_MHz column reflects the total number of cycles executed
+divided by the measurement interval. If the %Busy column is 100%,
+then the processor was running at that speed the entire interval.
+The Avg_MHz multiplied by the %Busy results in the Bzy_MHz --
+which is the average frequency while the processor was executing --
+not including any non-busy idle time.
+
.SH NOTES
.B "turbostat "
unsigned int use_c1_residency_msr;
unsigned int has_aperf;
unsigned int has_epb;
-unsigned int units = 1000000000; /* Ghz etc */
+unsigned int units = 1000000; /* MHz etc */
unsigned int genuine_intel;
unsigned int has_invariant_tsc;
unsigned int do_nehalem_platform_info;
return 0;
}
+/*
+ * Example Format w/ field column widths:
+ *
+ * Package Core CPU Avg_MHz Bzy_MHz TSC_MHz SMI %Busy CPU_%c1 CPU_%c3 CPU_%c6 CPU_%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ * 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567
+ */
+
void print_header(void)
{
if (show_pkg)
- outp += sprintf(outp, "pk");
- if (show_pkg)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, "Package ");
if (show_core)
- outp += sprintf(outp, "cor");
+ outp += sprintf(outp, " Core ");
if (show_cpu)
- outp += sprintf(outp, " CPU");
- if (show_pkg || show_core || show_cpu)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " CPU ");
+ if (has_aperf)
+ outp += sprintf(outp, "Avg_MHz ");
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c0");
+ outp += sprintf(outp, " %%Busy ");
if (has_aperf)
- outp += sprintf(outp, " GHz");
- outp += sprintf(outp, " TSC");
+ outp += sprintf(outp, "Bzy_MHz ");
+ outp += sprintf(outp, "TSC_MHz ");
if (do_smi)
- outp += sprintf(outp, " SMI");
+ outp += sprintf(outp, " SMI ");
if (extra_delta_offset32)
- outp += sprintf(outp, " count 0x%03X", extra_delta_offset32);
+ outp += sprintf(outp, " count 0x%03X ", extra_delta_offset32);
if (extra_delta_offset64)
- outp += sprintf(outp, " COUNT 0x%03X", extra_delta_offset64);
+ outp += sprintf(outp, " COUNT 0x%03X ", extra_delta_offset64);
if (extra_msr_offset32)
- outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset32);
+ outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset32);
if (extra_msr_offset64)
- outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset64);
+ outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset64);
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c1");
+ outp += sprintf(outp, " CPU%%c1 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%c3");
+ outp += sprintf(outp, " CPU%%c3 ");
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c6");
+ outp += sprintf(outp, " CPU%%c6 ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%c7");
+ outp += sprintf(outp, " CPU%%c7 ");
if (do_dts)
- outp += sprintf(outp, " CTMP");
+ outp += sprintf(outp, "CoreTmp ");
if (do_ptm)
- outp += sprintf(outp, " PTMP");
+ outp += sprintf(outp, " PkgTmp ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%pc2");
+ outp += sprintf(outp, "Pkg%%pc2 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%pc3");
+ outp += sprintf(outp, "Pkg%%pc3 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%pc6");
+ outp += sprintf(outp, "Pkg%%pc6 ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%pc7");
+ outp += sprintf(outp, "Pkg%%pc7 ");
if (do_c8_c9_c10) {
- outp += sprintf(outp, " %%pc8");
- outp += sprintf(outp, " %%pc9");
- outp += sprintf(outp, " %%pc10");
+ outp += sprintf(outp, "Pkg%%pc8 ");
+ outp += sprintf(outp, "Pkg%%pc9 ");
+ outp += sprintf(outp, "Pk%%pc10 ");
}
if (do_rapl && !rapl_joules) {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, " Pkg_W");
+ outp += sprintf(outp, "PkgWatt ");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, " Cor_W");
+ outp += sprintf(outp, "CorWatt ");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, " GFX_W");
+ outp += sprintf(outp, "GFXWatt ");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, " RAM_W");
+ outp += sprintf(outp, "RAMWatt ");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%%");
+ outp += sprintf(outp, " PKG_%% ");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%%");
+ outp += sprintf(outp, " RAM_%% ");
} else {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, " Pkg_J");
+ outp += sprintf(outp, " Pkg_J ");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, " Cor_J");
+ outp += sprintf(outp, " Cor_J ");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, " GFX_J");
+ outp += sprintf(outp, " GFX_J ");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, " RAM_W");
+ outp += sprintf(outp, " RAM_W ");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%%");
+ outp += sprintf(outp, " PKG_%% ");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%%");
- outp += sprintf(outp, " time");
+ outp += sprintf(outp, " RAM_%% ");
+ outp += sprintf(outp, " time ");
}
outp += sprintf(outp, "\n");
/*
* column formatting convention & formats
- * package: "pk" 2 columns %2d
- * core: "cor" 3 columns %3d
- * CPU: "CPU" 3 columns %3d
- * Pkg_W: %6.2
- * Cor_W: %6.2
- * GFX_W: %5.2
- * RAM_W: %5.2
- * GHz: "GHz" 3 columns %3.2
- * TSC: "TSC" 3 columns %3.2
- * SMI: "SMI" 4 columns %4d
- * percentage " %pc3" %6.2
- * Perf Status percentage: %5.2
- * "CTMP" 4 columns %4d
*/
int format_counters(struct thread_data *t, struct core_data *c,
struct pkg_data *p)
{
double interval_float;
- char *fmt5, *fmt6;
+ char *fmt8;
/* if showing only 1st thread in core and this isn't one, bail out */
if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
/* topo columns, print blanks on 1st (average) line */
if (t == &average.threads) {
if (show_pkg)
- outp += sprintf(outp, " ");
- if (show_pkg && show_core)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
if (show_core)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
if (show_cpu)
- outp += sprintf(outp, " " " ");
+ outp += sprintf(outp, " -");
} else {
if (show_pkg) {
if (p)
- outp += sprintf(outp, "%2d", p->package_id);
+ outp += sprintf(outp, "%8d", p->package_id);
else
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
}
- if (show_pkg && show_core)
- outp += sprintf(outp, " ");
if (show_core) {
if (c)
- outp += sprintf(outp, "%3d", c->core_id);
+ outp += sprintf(outp, "%8d", c->core_id);
else
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
}
if (show_cpu)
- outp += sprintf(outp, " %3d", t->cpu_id);
+ outp += sprintf(outp, "%8d", t->cpu_id);
}
+
+ /* AvgMHz */
+ if (has_aperf)
+ outp += sprintf(outp, "%8.0f",
+ 1.0 / units * t->aperf / interval_float);
+
/* %c0 */
if (do_nhm_cstates) {
- if (show_pkg || show_core || show_cpu)
- outp += sprintf(outp, " ");
if (!skip_c0)
- outp += sprintf(outp, "%6.2f", 100.0 * t->mperf/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * t->mperf/t->tsc);
else
- outp += sprintf(outp, " ****");
+ outp += sprintf(outp, "********");
}
- /* GHz */
- if (has_aperf) {
- if (!aperf_mperf_unstable) {
- outp += sprintf(outp, " %3.2f",
- 1.0 * t->tsc / units * t->aperf /
- t->mperf / interval_float);
- } else {
- if (t->aperf > t->tsc || t->mperf > t->tsc) {
- outp += sprintf(outp, " ***");
- } else {
- outp += sprintf(outp, "%3.1f*",
- 1.0 * t->tsc /
- units * t->aperf /
- t->mperf / interval_float);
- }
- }
- }
+ /* BzyMHz */
+ if (has_aperf)
+ outp += sprintf(outp, "%8.0f",
+ 1.0 * t->tsc / units * t->aperf / t->mperf / interval_float);
/* TSC */
- outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
+ outp += sprintf(outp, "%8.0f", 1.0 * t->tsc/units/interval_float);
/* SMI */
if (do_smi)
- outp += sprintf(outp, "%4d", t->smi_count);
+ outp += sprintf(outp, "%8d", t->smi_count);
/* delta */
if (extra_delta_offset32)
if (do_nhm_cstates) {
if (!skip_c1)
- outp += sprintf(outp, " %6.2f", 100.0 * t->c1/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * t->c1/t->tsc);
else
- outp += sprintf(outp, " ****");
+ outp += sprintf(outp, "********");
}
/* print per-core data only for 1st thread in core */
goto done;
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c3/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c3/t->tsc);
if (do_nhm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c6/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c6/t->tsc);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c7/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c7/t->tsc);
if (do_dts)
- outp += sprintf(outp, " %4d", c->core_temp_c);
+ outp += sprintf(outp, "%8d", c->core_temp_c);
/* print per-package data only for 1st core in package */
if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
goto done;
if (do_ptm)
- outp += sprintf(outp, " %4d", p->pkg_temp_c);
+ outp += sprintf(outp, "%8d", p->pkg_temp_c);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc2/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc2/t->tsc);
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc3/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc3/t->tsc);
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc6/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc6/t->tsc);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc7/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc7/t->tsc);
if (do_c8_c9_c10) {
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc8/t->tsc);
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc9/t->tsc);
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc10/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc8/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc9/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc10/t->tsc);
}
/*
* If measurement interval exceeds minimum RAPL Joule Counter range,
* indicate that results are suspect by printing "**" in fraction place.
*/
- if (interval_float < rapl_joule_counter_range) {
- fmt5 = " %5.2f";
- fmt6 = " %6.2f";
- } else {
- fmt5 = " %3.0f**";
- fmt6 = " %4.0f**";
- }
+ if (interval_float < rapl_joule_counter_range)
+ fmt8 = "%8.2f";
+ else
+ fmt8 = " %6.0f**";
if (do_rapl && !rapl_joules) {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, fmt6, p->energy_pkg * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_pkg * rapl_energy_units / interval_float);
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, fmt6, p->energy_cores * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_cores * rapl_energy_units / interval_float);
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, fmt5, p->energy_gfx * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_gfx * rapl_energy_units / interval_float);
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, fmt5, p->energy_dram * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_dram * rapl_energy_units / interval_float);
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
} else {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, fmt6,
+ outp += sprintf(outp, fmt8,
p->energy_pkg * rapl_energy_units);
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, fmt6,
+ outp += sprintf(outp, fmt8,
p->energy_cores * rapl_energy_units);
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, fmt5,
+ outp += sprintf(outp, fmt8,
p->energy_gfx * rapl_energy_units);
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, fmt5,
+ outp += sprintf(outp, fmt8,
p->energy_dram * rapl_energy_units);
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
- outp += sprintf(outp, fmt5, interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, interval_float);
}
done:
cmdline(argc, argv);
if (verbose)
- fprintf(stderr, "turbostat v3.6 Dec 2, 2013"
+ fprintf(stderr, "turbostat v3.7 Feb 6, 2014"
" - Len Brown <lenb@kernel.org>\n");
turbostat_init();
projects / karo-tx-linux.git / commitdiff