* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-
-void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+ u8 *ascq)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 err = 0;
+ int i;
++
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
/*
* Is this an error we can process/parse
*/
-
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
-
- /* Display the ATA level error info */
-
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
- printk("Busy ");
- err = 0; /* Data is not valid in this case */
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
}
- else {
- if(drv_stat & 0x40) printk("DriveReady ");
- if(drv_stat & 0x20) printk("DeviceFault ");
- if(drv_stat & 0x10) printk("SeekComplete ");
- if(drv_stat & 0x08) printk("DataRequest ");
- if(drv_stat & 0x04) printk("CorrectedError ");
- if(drv_stat & 0x02) printk("Index ");
- if(drv_stat & 0x01) printk("Error ");
+
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
+ }
+ /* No immediate match */
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
}
- printk("}\n");
-
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
- if(err & 0x04) printk("DriveStatusError ");
- if(err & 0x80)
- {
- if(err & 0x04)
- printk("BadCRC ");
- else
- printk("Sector ");
+
+ /* Fall back to interpreting status bits */
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
}
- if(err & 0x40) printk("UncorrectableError ");
- if(err & 0x10) printk("SectorIdNotFound ");
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
+ }
+ /* No error? Undecoded? */
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ id, drv_stat);
+
+ /* For our last chance pick, use medium read error because
+ * it's much more common than an ATA drive telling you a write
+ * has failed.
+ */
+ *sk = MEDIUM_ERROR;
+ *asc = 0x11; /* "unrecovered read error" */
+ *ascq = 0x04; /* "auto-reallocation failed" */
+
+ translate_done:
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
+ "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
+ *sk, *asc, *ascq);
+ return;
+}
+
+/*
+ * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. Clear sense key, ASC & ASCQ if there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
- /* Should we dump sector info here too ?? */
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3]);
+ sb[1] &= 0x0f;
}
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
- /* Look for best matches first */
- if((sense_table[i][0] & err) == sense_table[i][0])
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
- }
- i++;
+ desc[0] = 0x09;
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
}
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
+}
- i = 0;
- /* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
- if(stat_table[i][0] & drv_stat)
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
- }
- i++;
+/**
+ * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Leverage ata_to_sense_error() to give us the codes. Fit our
+ * LBA in here if there's room.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[2], &sb[12], &sb[13]);
+ sb[2] &= 0x0f;
}
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
- if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4);
- /* "unrecovered read error" */
- } else {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2);
- /* "write error - auto-reallocation failed" */
+ sb[0] = 0x70;
+ sb[7] = 0x0a;
+
- #if 0 /* when C/H/S support is merged */
+ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) {
- #endif
- if (!(tf->flags & ATA_TFLAG_LBA48)) {
+ /* A small (28b) LBA will fit in the 32b info field */
+ sb[0] |= 0x80; /* set valid bit */
+ sb[3] = tf->device & 0x0f;
+ sb[4] = tf->lbah;
+ sb[5] = tf->lbam;
+ sb[6] = tf->lbal;
}
}
projects / karo-tx-linux.git / commitdiff