1 # ====================================================================
5 # eCos serial MN10300 configuration data
7 # ====================================================================
8 #####ECOSGPLCOPYRIGHTBEGIN####
9 ## -------------------------------------------
10 ## This file is part of eCos, the Embedded Configurable Operating System.
11 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
13 ## eCos is free software; you can redistribute it and/or modify it under
14 ## the terms of the GNU General Public License as published by the Free
15 ## Software Foundation; either version 2 or (at your option) any later version.
17 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
18 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
19 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
22 ## You should have received a copy of the GNU General Public License along
23 ## with eCos; if not, write to the Free Software Foundation, Inc.,
24 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
26 ## As a special exception, if other files instantiate templates or use macros
27 ## or inline functions from this file, or you compile this file and link it
28 ## with other works to produce a work based on this file, this file does not
29 ## by itself cause the resulting work to be covered by the GNU General Public
30 ## License. However the source code for this file must still be made available
31 ## in accordance with section (3) of the GNU General Public License.
33 ## This exception does not invalidate any other reasons why a work based on
34 ## this file might be covered by the GNU General Public License.
36 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
37 ## at http://sources.redhat.com/ecos/ecos-license/
38 ## -------------------------------------------
39 #####ECOSGPLCOPYRIGHTEND####
40 # ====================================================================
41 ######DESCRIPTIONBEGIN####
44 # Original data: gthomas
48 #####DESCRIPTIONEND####
50 # ====================================================================
53 cdl_package CYGPKG_IO_SERIAL_MN10300 {
54 display "MN10300 serial device drivers"
56 parent CYGPKG_IO_SERIAL_DEVICES
57 active_if CYGPKG_IO_SERIAL
58 active_if CYGPKG_HAL_MN10300
60 # Note: this is not currently tied to a specific board since the
65 include_files ; # none _exported_ whatsoever
67 This option enables the serial device drivers for the
70 compile -library=libextras.a mn10300_serial.c
73 puts $::cdl_system_header "/***** serial driver proc output start *****/"
74 puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_DEVICE_HEADER <pkgconf/io_serial_mn10300.h>"
75 puts $::cdl_system_header "/***** serial driver proc output end *****/"
79 cdl_option CYGPKG_IO_SERIAL_MN10300_POLLED_MODE {
80 display "MN10300 polled mode serial drivers"
84 If asserted, this option specifies that the serial device
85 drivers for the MN10300 should be polled-mode instead of
89 cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL0 {
90 display "MN10300 serial port 0 driver"
94 This option includes the serial device driver for port 0 on the
97 cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL0_NAME {
98 display "Device name for MN10300 serial port 0"
100 default_value {"\"/dev/ser0\""}
102 This option specifies the device name port 0 on the MN10300."
105 cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BAUD {
106 display "Baud rate for the MN10300 serial port 0 driver"
108 legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600
109 4800 7200 9600 14400 19200 38400 57600 115200 230400
113 This option specifies the default baud rate (speed) for the
117 cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL0_BUFSIZE {
118 display "Buffer size for the MN10300 serial port 0 driver"
120 legal_values 0 to 8192
123 This option specifies the size of the internal buffers used
124 for the MN10300 port 0."
128 cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL1 {
129 display "MN10300 serial port 1 driver"
133 This option includes the serial device driver for port 1 on
136 cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL1_NAME {
137 display "Device name for MN10300 serial port 1"
139 default_value {"\"/dev/ser1\""}
141 This option specifies the device name port 1 on the MN10300."
144 cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BAUD {
145 display "Baud rate for the MN10300 serial port 1 driver"
147 legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600
148 4800 7200 9600 14400 19200 38400 57600 115200 230400
152 This option specifies the default baud rate (speed) for the
156 cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL1_BUFSIZE {
157 display "Buffer size for the MN10300 serial port 1 driver"
159 legal_values 0 to 8192
162 This option specifies the size of the internal buffers used
163 for the MN10300 port 1."
166 cdl_component CYGPKG_IO_SERIAL_MN10300_SERIAL2 {
167 display "MN10300 serial port 2 driver"
171 This option includes the serial device driver for port 2 on the
174 cdl_option CYGDAT_IO_SERIAL_MN10300_SERIAL2_NAME {
175 display "Device name for MN10300 serial port 2"
177 default_value {"\"/dev/ser2\""}
179 This option specifies the device name port 2 on the MN10300."
182 cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BAUD {
183 display "Baud rate for the MN10300 serial port 2 driver"
185 legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600
186 4800 7200 9600 14400 19200 38400 57600 115200 230400
190 This option specifies the default baud rate (speed) for the
194 cdl_option CYGNUM_IO_SERIAL_MN10300_SERIAL2_BUFSIZE {
195 display "Buffer size for the MN10300 serial port 2 driver"
197 legal_values 0 to 8192
200 This option specifies the size of the internal buffers used
201 for the MN10300 port 2."
205 cdl_component CYGPKG_IO_SERIAL_MN10300_OPTIONS {
206 display "Serial device driver build options"
209 Package specific build options including control over
210 compiler flags used only in building this package,
211 and details of which tests are built."
214 cdl_option CYGPKG_IO_SERIAL_MN10300_CFLAGS_ADD {
215 display "Additional compiler flags"
220 This option modifies the set of compiler flags for
221 building these serial device drivers. These flags are used in addition
222 to the set of global flags."
225 cdl_option CYGPKG_IO_SERIAL_MN10300_CFLAGS_REMOVE {
226 display "Suppressed compiler flags"
231 This option modifies the set of compiler flags for
232 building these serial device drivers. These flags are removed from
233 the set of global flags if present."
238 # EOF ser_mn10300.cdl