]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/cpu/arm926ejs/davinci/dm644x.c
mxc_ipuv3: fix memory alignment of framebuffer
[karo-tx-uboot.git] / arch / arm / cpu / arm926ejs / davinci / dm644x.c
1 /*
2  * SoC-specific code for tms320dm644x chips
3  *
4  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
5  * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
6  * Copyright (C) 2004 Texas Instruments.
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24  */
25
26 #include <common.h>
27 #include <asm/arch/hardware.h>
28
29
30 #define PINMUX0_EMACEN (1 << 31)
31 #define PINMUX0_AECS5  (1 << 11)
32 #define PINMUX0_AECS4  (1 << 10)
33
34 #define PINMUX1_I2C    (1 <<  7)
35 #define PINMUX1_UART1  (1 <<  1)
36 #define PINMUX1_UART0  (1 <<  0)
37
38
39 void davinci_enable_uart0(void)
40 {
41         lpsc_on(DAVINCI_LPSC_UART0);
42
43         /* Bringup UART0 out of reset */
44         REG(UART0_PWREMU_MGMT) = 0x00006001;
45
46         /* Enable UART0 MUX lines */
47         REG(PINMUX1) |= PINMUX1_UART0;
48 }
49
50 #ifdef CONFIG_DRIVER_TI_EMAC
51 void davinci_enable_emac(void)
52 {
53         lpsc_on(DAVINCI_LPSC_EMAC);
54         lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
55         lpsc_on(DAVINCI_LPSC_MDIO);
56
57         /* Enable GIO3.3V cells used for EMAC */
58         REG(VDD3P3V_PWDN) = 0;
59
60         /* Enable EMAC. */
61         REG(PINMUX0) |= PINMUX0_EMACEN;
62 }
63 #endif
64
65 #ifdef CONFIG_DRIVER_DAVINCI_I2C
66 void davinci_enable_i2c(void)
67 {
68         lpsc_on(DAVINCI_LPSC_I2C);
69
70         /* Enable I2C pin Mux */
71         REG(PINMUX1) |= PINMUX1_I2C;
72 }
73 #endif
74
75 void davinci_errata_workarounds(void)
76 {
77         /*
78          * Workaround for TMS320DM6446 errata 1.3.22:
79          *   PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
80          *   Revision(s) Affected: 1.3 and earlier
81          */
82         REG(PSC_SILVER_BULLET) = 0;
83
84         /*
85          * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
86          * as suggested in TMS320DM6446 errata 2.1.2:
87          *
88          * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
89          * low priority modules can occupy the bus and prevent high priority
90          * modules like the VPSS from getting the required DDR2 throughput.
91          * A hex value of 0x20 should provide a good ARM (cache enabled)
92          * performance and still allow good utilization by the VPSS or other
93          * modules.
94          */
95         REG(VBPR) = 0x20;
96 }