]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/cpu/armv7/am33xx/board.c
am33xx: Pass to config_ddr the type of memory that is connected
[karo-tx-uboot.git] / arch / arm / cpu / armv7 / am33xx / board.c
1 /*
2  * board.c
3  *
4  * Common board functions for AM33XX based boards
5  *
6  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
16  * GNU General Public License for more details.
17  */
18
19 #include <common.h>
20 #include <asm/arch/cpu.h>
21 #include <asm/arch/hardware.h>
22 #include <asm/arch/omap.h>
23 #include <asm/arch/ddr_defs.h>
24 #include <asm/arch/clock.h>
25 #include <asm/arch/gpio.h>
26 #include <asm/arch/mmc_host_def.h>
27 #include <asm/arch/common_def.h>
28 #include <asm/io.h>
29 #include <asm/omap_common.h>
30 #include <asm/emif.h>
31
32 DECLARE_GLOBAL_DATA_PTR;
33
34 struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
35 struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
36 struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
37
38 static const struct gpio_bank gpio_bank_am33xx[4] = {
39         { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
40         { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
41         { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
42         { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
43 };
44
45 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
46
47 /* UART Defines */
48 #ifdef CONFIG_SPL_BUILD
49 #define UART_RESET              (0x1 << 1)
50 #define UART_CLK_RUNNING_MASK   0x1
51 #define UART_SMART_IDLE_EN      (0x1 << 0x3)
52 #endif
53
54 #ifdef CONFIG_SPL_BUILD
55 /* Initialize timer */
56 static void init_timer(void)
57 {
58         /* Reset the Timer */
59         writel(0x2, (&timer_base->tscir));
60
61         /* Wait until the reset is done */
62         while (readl(&timer_base->tiocp_cfg) & 1)
63                 ;
64
65         /* Start the Timer */
66         writel(0x1, (&timer_base->tclr));
67 }
68 #endif
69
70 /*
71  * early system init of muxing and clocks.
72  */
73 void s_init(void)
74 {
75         /* WDT1 is already running when the bootloader gets control
76          * Disable it to avoid "random" resets
77          */
78         writel(0xAAAA, &wdtimer->wdtwspr);
79         while (readl(&wdtimer->wdtwwps) != 0x0)
80                 ;
81         writel(0x5555, &wdtimer->wdtwspr);
82         while (readl(&wdtimer->wdtwwps) != 0x0)
83                 ;
84
85 #ifdef CONFIG_SPL_BUILD
86         /* Setup the PLLs and the clocks for the peripherals */
87         pll_init();
88
89         /* UART softreset */
90         u32 regVal;
91
92         enable_uart0_pin_mux();
93
94         regVal = readl(&uart_base->uartsyscfg);
95         regVal |= UART_RESET;
96         writel(regVal, &uart_base->uartsyscfg);
97         while ((readl(&uart_base->uartsyssts) &
98                 UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
99                 ;
100
101         /* Disable smart idle */
102         regVal = readl(&uart_base->uartsyscfg);
103         regVal |= UART_SMART_IDLE_EN;
104         writel(regVal, &uart_base->uartsyscfg);
105
106         /* Initialize the Timer */
107         init_timer();
108
109         preloader_console_init();
110
111         config_ddr(EMIF_REG_SDRAM_TYPE_DDR2);
112 #endif
113
114         /* Enable MMC0 */
115         enable_mmc0_pin_mux();
116 }
117
118 #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
119 int board_mmc_init(bd_t *bis)
120 {
121         return omap_mmc_init(0, 0, 0);
122 }
123 #endif
124
125 void setup_clocks_for_console(void)
126 {
127         /* Not yet implemented */
128         return;
129 }