]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/dts/sun8i-a23-a33.dtsi
arm: socfpga: Make the DT mmc node consistent
[karo-tx-uboot.git] / arch / arm / dts / sun8i-a23-a33.dtsi
1 /*
2  * Copyright 2014 Chen-Yu Tsai
3  *
4  * Chen-Yu Tsai <wens@csie.org>
5  *
6  * This file is dual-licensed: you can use it either under the terms
7  * of the GPL or the X11 license, at your option. Note that this dual
8  * licensing only applies to this file, and not this project as a
9  * whole.
10  *
11  *  a) This file is free software; you can redistribute it and/or
12  *     modify it under the terms of the GNU General Public License as
13  *     published by the Free Software Foundation; either version 2 of the
14  *     License, or (at your option) any later version.
15  *
16  *     This file is distributed in the hope that it will be useful,
17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  *     GNU General Public License for more details.
20  *
21  * Or, alternatively,
22  *
23  *  b) Permission is hereby granted, free of charge, to any person
24  *     obtaining a copy of this software and associated documentation
25  *     files (the "Software"), to deal in the Software without
26  *     restriction, including without limitation the rights to use,
27  *     copy, modify, merge, publish, distribute, sublicense, and/or
28  *     sell copies of the Software, and to permit persons to whom the
29  *     Software is furnished to do so, subject to the following
30  *     conditions:
31  *
32  *     The above copyright notice and this permission notice shall be
33  *     included in all copies or substantial portions of the Software.
34  *
35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42  *     OTHER DEALINGS IN THE SOFTWARE.
43  */
44
45 #include "skeleton.dtsi"
46
47 #include <dt-bindings/interrupt-controller/arm-gic.h>
48
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
50
51 / {
52         interrupt-parent = <&gic>;
53
54         chosen {
55                 #address-cells = <1>;
56                 #size-cells = <1>;
57                 ranges;
58
59                 framebuffer@0 {
60                         compatible = "allwinner,simple-framebuffer",
61                                      "simple-framebuffer";
62                         allwinner,pipeline = "de_be0-lcd0";
63                         clocks = <&pll6 0>;
64                         status = "disabled";
65                 };
66         };
67
68         timer {
69                 compatible = "arm,armv7-timer";
70                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
71                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
72                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
73                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
74                 clock-frequency = <24000000>;
75                 arm,cpu-registers-not-fw-configured;
76         };
77
78         cpus {
79                 enable-method = "allwinner,sun8i-a23";
80                 #address-cells = <1>;
81                 #size-cells = <0>;
82
83                 cpu@0 {
84                         compatible = "arm,cortex-a7";
85                         device_type = "cpu";
86                         reg = <0>;
87                 };
88
89                 cpu@1 {
90                         compatible = "arm,cortex-a7";
91                         device_type = "cpu";
92                         reg = <1>;
93                 };
94         };
95
96         clocks {
97                 #address-cells = <1>;
98                 #size-cells = <1>;
99                 ranges;
100
101                 osc24M: osc24M_clk {
102                         #clock-cells = <0>;
103                         compatible = "fixed-clock";
104                         clock-frequency = <24000000>;
105                         clock-output-names = "osc24M";
106                 };
107
108                 osc32k: osc32k_clk {
109                         #clock-cells = <0>;
110                         compatible = "fixed-clock";
111                         clock-frequency = <32768>;
112                         clock-output-names = "osc32k";
113                 };
114
115                 pll1: clk@01c20000 {
116                         #clock-cells = <0>;
117                         compatible = "allwinner,sun8i-a23-pll1-clk";
118                         reg = <0x01c20000 0x4>;
119                         clocks = <&osc24M>;
120                         clock-output-names = "pll1";
121                 };
122
123                 /* dummy clock until actually implemented */
124                 pll5: pll5_clk {
125                         #clock-cells = <0>;
126                         compatible = "fixed-clock";
127                         clock-frequency = <0>;
128                         clock-output-names = "pll5";
129                 };
130
131                 pll6: clk@01c20028 {
132                         #clock-cells = <1>;
133                         compatible = "allwinner,sun6i-a31-pll6-clk";
134                         reg = <0x01c20028 0x4>;
135                         clocks = <&osc24M>;
136                         clock-output-names = "pll6", "pll6x2";
137                 };
138
139                 cpu: cpu_clk@01c20050 {
140                         #clock-cells = <0>;
141                         compatible = "allwinner,sun4i-a10-cpu-clk";
142                         reg = <0x01c20050 0x4>;
143
144                         /*
145                          * PLL1 is listed twice here.
146                          * While it looks suspicious, it's actually documented
147                          * that way both in the datasheet and in the code from
148                          * Allwinner.
149                          */
150                         clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
151                         clock-output-names = "cpu";
152                 };
153
154                 axi: axi_clk@01c20050 {
155                         #clock-cells = <0>;
156                         compatible = "allwinner,sun8i-a23-axi-clk";
157                         reg = <0x01c20050 0x4>;
158                         clocks = <&cpu>;
159                         clock-output-names = "axi";
160                 };
161
162                 ahb1: ahb1_clk@01c20054 {
163                         #clock-cells = <0>;
164                         compatible = "allwinner,sun6i-a31-ahb1-clk";
165                         reg = <0x01c20054 0x4>;
166                         clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
167                         clock-output-names = "ahb1";
168                 };
169
170                 apb1: apb1_clk@01c20054 {
171                         #clock-cells = <0>;
172                         compatible = "allwinner,sun4i-a10-apb0-clk";
173                         reg = <0x01c20054 0x4>;
174                         clocks = <&ahb1>;
175                         clock-output-names = "apb1";
176                 };
177
178                 ahb1_gates: clk@01c20060 {
179                         #clock-cells = <1>;
180                         compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
181                         reg = <0x01c20060 0x8>;
182                         clocks = <&ahb1>;
183                         clock-output-names = "ahb1_mipidsi", "ahb1_dma",
184                                         "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
185                                         "ahb1_nand", "ahb1_sdram",
186                                         "ahb1_hstimer", "ahb1_spi0",
187                                         "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
188                                         "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
189                                         "ahb1_csi", "ahb1_be",  "ahb1_fe",
190                                         "ahb1_gpu", "ahb1_spinlock",
191                                         "ahb1_drc";
192                 };
193
194                 apb1_gates: clk@01c20068 {
195                         #clock-cells = <1>;
196                         compatible = "allwinner,sun8i-a23-apb1-gates-clk";
197                         reg = <0x01c20068 0x4>;
198                         clocks = <&apb1>;
199                         clock-output-names = "apb1_codec", "apb1_pio",
200                                         "apb1_daudio0", "apb1_daudio1";
201                 };
202
203                 apb2: clk@01c20058 {
204                         #clock-cells = <0>;
205                         compatible = "allwinner,sun4i-a10-apb1-clk";
206                         reg = <0x01c20058 0x4>;
207                         clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
208                         clock-output-names = "apb2";
209                 };
210
211                 apb2_gates: clk@01c2006c {
212                         #clock-cells = <1>;
213                         compatible = "allwinner,sun8i-a23-apb2-gates-clk";
214                         reg = <0x01c2006c 0x4>;
215                         clocks = <&apb2>;
216                         clock-output-names = "apb2_i2c0", "apb2_i2c1",
217                                         "apb2_i2c2", "apb2_uart0",
218                                         "apb2_uart1", "apb2_uart2",
219                                         "apb2_uart3", "apb2_uart4";
220                 };
221
222                 mmc0_clk: clk@01c20088 {
223                         #clock-cells = <1>;
224                         compatible = "allwinner,sun4i-a10-mmc-clk";
225                         reg = <0x01c20088 0x4>;
226                         clocks = <&osc24M>, <&pll6 0>;
227                         clock-output-names = "mmc0",
228                                              "mmc0_output",
229                                              "mmc0_sample";
230                 };
231
232                 mmc1_clk: clk@01c2008c {
233                         #clock-cells = <1>;
234                         compatible = "allwinner,sun4i-a10-mmc-clk";
235                         reg = <0x01c2008c 0x4>;
236                         clocks = <&osc24M>, <&pll6 0>;
237                         clock-output-names = "mmc1",
238                                              "mmc1_output",
239                                              "mmc1_sample";
240                 };
241
242                 mmc2_clk: clk@01c20090 {
243                         #clock-cells = <1>;
244                         compatible = "allwinner,sun4i-a10-mmc-clk";
245                         reg = <0x01c20090 0x4>;
246                         clocks = <&osc24M>, <&pll6 0>;
247                         clock-output-names = "mmc2",
248                                              "mmc2_output",
249                                              "mmc2_sample";
250                 };
251
252                 usb_clk: clk@01c200cc {
253                         #clock-cells = <1>;
254                         #reset-cells = <1>;
255                         compatible = "allwinner,sun8i-a23-usb-clk";
256                         reg = <0x01c200cc 0x4>;
257                         clocks = <&osc24M>;
258                         clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
259                                              "usb_hsic_12M", "usb_ohci0";
260                 };
261         };
262
263         soc@01c00000 {
264                 compatible = "simple-bus";
265                 #address-cells = <1>;
266                 #size-cells = <1>;
267                 ranges;
268
269                 dma: dma-controller@01c02000 {
270                         compatible = "allwinner,sun8i-a23-dma";
271                         reg = <0x01c02000 0x1000>;
272                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
273                         clocks = <&ahb1_gates 6>;
274                         resets = <&ahb1_rst 6>;
275                         #dma-cells = <1>;
276                 };
277
278                 mmc0: mmc@01c0f000 {
279                         compatible = "allwinner,sun5i-a13-mmc";
280                         reg = <0x01c0f000 0x1000>;
281                         clocks = <&ahb1_gates 8>,
282                                  <&mmc0_clk 0>,
283                                  <&mmc0_clk 1>,
284                                  <&mmc0_clk 2>;
285                         clock-names = "ahb",
286                                       "mmc",
287                                       "output",
288                                       "sample";
289                         resets = <&ahb1_rst 8>;
290                         reset-names = "ahb";
291                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
292                         status = "disabled";
293                         #address-cells = <1>;
294                         #size-cells = <0>;
295                 };
296
297                 mmc1: mmc@01c10000 {
298                         compatible = "allwinner,sun5i-a13-mmc";
299                         reg = <0x01c10000 0x1000>;
300                         clocks = <&ahb1_gates 9>,
301                                  <&mmc1_clk 0>,
302                                  <&mmc1_clk 1>,
303                                  <&mmc1_clk 2>;
304                         clock-names = "ahb",
305                                       "mmc",
306                                       "output",
307                                       "sample";
308                         resets = <&ahb1_rst 9>;
309                         reset-names = "ahb";
310                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
311                         status = "disabled";
312                         #address-cells = <1>;
313                         #size-cells = <0>;
314                 };
315
316                 mmc2: mmc@01c11000 {
317                         compatible = "allwinner,sun5i-a13-mmc";
318                         reg = <0x01c11000 0x1000>;
319                         clocks = <&ahb1_gates 10>,
320                                  <&mmc2_clk 0>,
321                                  <&mmc2_clk 1>,
322                                  <&mmc2_clk 2>;
323                         clock-names = "ahb",
324                                       "mmc",
325                                       "output",
326                                       "sample";
327                         resets = <&ahb1_rst 10>;
328                         reset-names = "ahb";
329                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
330                         status = "disabled";
331                         #address-cells = <1>;
332                         #size-cells = <0>;
333                 };
334
335                 ehci0: usb@01c1a000 {
336                         compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
337                         reg = <0x01c1a000 0x100>;
338                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
339                         clocks = <&ahb1_gates 26>;
340                         resets = <&ahb1_rst 26>;
341                         phys = <&usbphy 1>;
342                         phy-names = "usb";
343                         status = "disabled";
344                 };
345
346                 ohci0: usb@01c1a400 {
347                         compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
348                         reg = <0x01c1a400 0x100>;
349                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
350                         clocks = <&ahb1_gates 29>, <&usb_clk 16>;
351                         resets = <&ahb1_rst 29>;
352                         phys = <&usbphy 1>;
353                         phy-names = "usb";
354                         status = "disabled";
355                 };
356
357                 pio: pinctrl@01c20800 {
358                         /* compatible gets set in SoC specific dtsi file */
359                         reg = <0x01c20800 0x400>;
360                         /* interrupts get set in SoC specific dtsi file */
361                         clocks = <&apb1_gates 5>;
362                         gpio-controller;
363                         interrupt-controller;
364                         #interrupt-cells = <3>;
365                         #gpio-cells = <3>;
366
367                         uart0_pins_a: uart0@0 {
368                                 allwinner,pins = "PF2", "PF4";
369                                 allwinner,function = "uart0";
370                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
371                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
372                         };
373
374                         mmc0_pins_a: mmc0@0 {
375                                 allwinner,pins = "PF0", "PF1", "PF2",
376                                                  "PF3", "PF4", "PF5";
377                                 allwinner,function = "mmc0";
378                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
379                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
380                         };
381
382                         mmc1_pins_a: mmc1@0 {
383                                 allwinner,pins = "PG0", "PG1", "PG2",
384                                                  "PG3", "PG4", "PG5";
385                                 allwinner,function = "mmc1";
386                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
387                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
388                         };
389
390                         mmc2_8bit_pins: mmc2_8bit {
391                                 allwinner,pins = "PC5", "PC6", "PC8",
392                                                  "PC9", "PC10", "PC11",
393                                                  "PC12", "PC13", "PC14",
394                                                  "PC15";
395                                 allwinner,function = "mmc2";
396                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
397                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
398                         };
399
400                         i2c0_pins_a: i2c0@0 {
401                                 allwinner,pins = "PH2", "PH3";
402                                 allwinner,function = "i2c0";
403                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
404                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
405                         };
406
407                         i2c1_pins_a: i2c1@0 {
408                                 allwinner,pins = "PH4", "PH5";
409                                 allwinner,function = "i2c1";
410                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
411                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
412                         };
413
414                         i2c2_pins_a: i2c2@0 {
415                                 allwinner,pins = "PE12", "PE13";
416                                 allwinner,function = "i2c2";
417                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
418                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
419                         };
420                 };
421
422                 ahb1_rst: reset@01c202c0 {
423                         #reset-cells = <1>;
424                         compatible = "allwinner,sun6i-a31-clock-reset";
425                         reg = <0x01c202c0 0xc>;
426                 };
427
428                 apb1_rst: reset@01c202d0 {
429                         #reset-cells = <1>;
430                         compatible = "allwinner,sun6i-a31-clock-reset";
431                         reg = <0x01c202d0 0x4>;
432                 };
433
434                 apb2_rst: reset@01c202d8 {
435                         #reset-cells = <1>;
436                         compatible = "allwinner,sun6i-a31-clock-reset";
437                         reg = <0x01c202d8 0x4>;
438                 };
439
440                 timer@01c20c00 {
441                         compatible = "allwinner,sun4i-a10-timer";
442                         reg = <0x01c20c00 0xa0>;
443                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
444                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
445                         clocks = <&osc24M>;
446                 };
447
448                 wdt0: watchdog@01c20ca0 {
449                         compatible = "allwinner,sun6i-a31-wdt";
450                         reg = <0x01c20ca0 0x20>;
451                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
452                 };
453
454                 lradc: lradc@01c22800 {
455                         compatible = "allwinner,sun4i-a10-lradc-keys";
456                         reg = <0x01c22800 0x100>;
457                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
458                         status = "disabled";
459                 };
460
461                 uart0: serial@01c28000 {
462                         compatible = "snps,dw-apb-uart";
463                         reg = <0x01c28000 0x400>;
464                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
465                         reg-shift = <2>;
466                         reg-io-width = <4>;
467                         clocks = <&apb2_gates 16>;
468                         resets = <&apb2_rst 16>;
469                         dmas = <&dma 6>, <&dma 6>;
470                         dma-names = "rx", "tx";
471                         status = "disabled";
472                 };
473
474                 uart1: serial@01c28400 {
475                         compatible = "snps,dw-apb-uart";
476                         reg = <0x01c28400 0x400>;
477                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
478                         reg-shift = <2>;
479                         reg-io-width = <4>;
480                         clocks = <&apb2_gates 17>;
481                         resets = <&apb2_rst 17>;
482                         dmas = <&dma 7>, <&dma 7>;
483                         dma-names = "rx", "tx";
484                         status = "disabled";
485                 };
486
487                 uart2: serial@01c28800 {
488                         compatible = "snps,dw-apb-uart";
489                         reg = <0x01c28800 0x400>;
490                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
491                         reg-shift = <2>;
492                         reg-io-width = <4>;
493                         clocks = <&apb2_gates 18>;
494                         resets = <&apb2_rst 18>;
495                         dmas = <&dma 8>, <&dma 8>;
496                         dma-names = "rx", "tx";
497                         status = "disabled";
498                 };
499
500                 uart3: serial@01c28c00 {
501                         compatible = "snps,dw-apb-uart";
502                         reg = <0x01c28c00 0x400>;
503                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
504                         reg-shift = <2>;
505                         reg-io-width = <4>;
506                         clocks = <&apb2_gates 19>;
507                         resets = <&apb2_rst 19>;
508                         dmas = <&dma 9>, <&dma 9>;
509                         dma-names = "rx", "tx";
510                         status = "disabled";
511                 };
512
513                 uart4: serial@01c29000 {
514                         compatible = "snps,dw-apb-uart";
515                         reg = <0x01c29000 0x400>;
516                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
517                         reg-shift = <2>;
518                         reg-io-width = <4>;
519                         clocks = <&apb2_gates 20>;
520                         resets = <&apb2_rst 20>;
521                         dmas = <&dma 10>, <&dma 10>;
522                         dma-names = "rx", "tx";
523                         status = "disabled";
524                 };
525
526                 i2c0: i2c@01c2ac00 {
527                         compatible = "allwinner,sun6i-a31-i2c";
528                         reg = <0x01c2ac00 0x400>;
529                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
530                         clocks = <&apb2_gates 0>;
531                         resets = <&apb2_rst 0>;
532                         status = "disabled";
533                         #address-cells = <1>;
534                         #size-cells = <0>;
535                 };
536
537                 i2c1: i2c@01c2b000 {
538                         compatible = "allwinner,sun6i-a31-i2c";
539                         reg = <0x01c2b000 0x400>;
540                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
541                         clocks = <&apb2_gates 1>;
542                         resets = <&apb2_rst 1>;
543                         status = "disabled";
544                         #address-cells = <1>;
545                         #size-cells = <0>;
546                 };
547
548                 i2c2: i2c@01c2b400 {
549                         compatible = "allwinner,sun6i-a31-i2c";
550                         reg = <0x01c2b400 0x400>;
551                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
552                         clocks = <&apb2_gates 2>;
553                         resets = <&apb2_rst 2>;
554                         status = "disabled";
555                         #address-cells = <1>;
556                         #size-cells = <0>;
557                 };
558
559                 gic: interrupt-controller@01c81000 {
560                         compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
561                         reg = <0x01c81000 0x1000>,
562                               <0x01c82000 0x1000>,
563                               <0x01c84000 0x2000>,
564                               <0x01c86000 0x2000>;
565                         interrupt-controller;
566                         #interrupt-cells = <3>;
567                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
568                 };
569
570                 rtc: rtc@01f00000 {
571                         compatible = "allwinner,sun6i-a31-rtc";
572                         reg = <0x01f00000 0x54>;
573                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
574                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
575                 };
576
577                 prcm@01f01400 {
578                         compatible = "allwinner,sun8i-a23-prcm";
579                         reg = <0x01f01400 0x200>;
580
581                         ar100: ar100_clk {
582                                 compatible = "fixed-factor-clock";
583                                 #clock-cells = <0>;
584                                 clock-div = <1>;
585                                 clock-mult = <1>;
586                                 clocks = <&osc24M>;
587                                 clock-output-names = "ar100";
588                         };
589
590                         ahb0: ahb0_clk {
591                                 compatible = "fixed-factor-clock";
592                                 #clock-cells = <0>;
593                                 clock-div = <1>;
594                                 clock-mult = <1>;
595                                 clocks = <&ar100>;
596                                 clock-output-names = "ahb0";
597                         };
598
599                         apb0: apb0_clk {
600                                 compatible = "allwinner,sun8i-a23-apb0-clk";
601                                 #clock-cells = <0>;
602                                 clocks = <&ahb0>;
603                                 clock-output-names = "apb0";
604                         };
605
606                         apb0_gates: apb0_gates_clk {
607                                 compatible = "allwinner,sun8i-a23-apb0-gates-clk";
608                                 #clock-cells = <1>;
609                                 clocks = <&apb0>;
610                                 clock-output-names = "apb0_pio", "apb0_timer",
611                                                 "apb0_rsb", "apb0_uart",
612                                                 "apb0_i2c";
613                         };
614
615                         apb0_rst: apb0_rst {
616                                 compatible = "allwinner,sun6i-a31-clock-reset";
617                                 #reset-cells = <1>;
618                         };
619                 };
620
621                 cpucfg@01f01c00 {
622                         compatible = "allwinner,sun8i-a23-cpuconfig";
623                         reg = <0x01f01c00 0x300>;
624                 };
625
626                 r_uart: serial@01f02800 {
627                         compatible = "snps,dw-apb-uart";
628                         reg = <0x01f02800 0x400>;
629                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
630                         reg-shift = <2>;
631                         reg-io-width = <4>;
632                         clocks = <&apb0_gates 4>;
633                         resets = <&apb0_rst 4>;
634                         status = "disabled";
635                 };
636
637                 r_pio: pinctrl@01f02c00 {
638                         compatible = "allwinner,sun8i-a23-r-pinctrl";
639                         reg = <0x01f02c00 0x400>;
640                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
641                         clocks = <&apb0_gates 0>;
642                         resets = <&apb0_rst 0>;
643                         gpio-controller;
644                         interrupt-controller;
645                         #address-cells = <1>;
646                         #size-cells = <0>;
647                         #gpio-cells = <3>;
648
649                         r_uart_pins_a: r_uart@0 {
650                                 allwinner,pins = "PL2", "PL3";
651                                 allwinner,function = "s_uart";
652                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
653                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
654                         };
655                 };
656         };
657 };