arch/blackfin/cpu/cpu.c

   1 /*
   2  * U-boot - cpu.c CPU specific functions
   3  *
   4  * Copyright (c) 2005-2008 Analog Devices Inc.
   5  *
   6  * (C) Copyright 2000-2004
   7  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   8  *
   9  * Licensed under the GPL-2 or later.
  10  */
  11
  12 #include <common.h>
  13 #include <command.h>
  14 #include <asm/blackfin.h>
  15 #include <asm/cplb.h>
  16 #include <asm/mach-common/bits/core.h>
  17 #include <asm/mach-common/bits/ebiu.h>
  18 #include <asm/mach-common/bits/trace.h>
  19
  20 #include "cpu.h"
  21 #include "serial.h"
  22
  23 ulong bfin_poweron_retx;
  24
  25 __attribute__ ((__noreturn__))
  26 void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
  27 {
  28 #ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
  29         /* Build a NOP slide over the LDR jump block.  Whee! */
  30         char nops[0xC];
  31         serial_early_puts("NOP Slide\n");
  32         memset(nops, 0x00, sizeof(nops));
  33         memcpy((void *)L1_INST_SRAM, nops, sizeof(nops));
  34 #endif
  35
  36         if (!loaded_from_ldr) {
  37                 /* Relocate sections into L1 if the LDR didn't do it -- don't
  38                  * check length because the linker script does the size
  39                  * checking at build time.
  40                  */
  41                 serial_early_puts("L1 Relocate\n");
  42                 extern char _stext_l1[], _text_l1_lma[], _text_l1_len[];
  43                 memcpy(&_stext_l1, &_text_l1_lma, (unsigned long)_text_l1_len);
  44                 extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[];
  45                 memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len);
  46         }
  47 #if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
  48         /* The BF537 bootrom will reset the EBIU_AMGCTL register on us
  49          * after it has finished loading the LDR.  So configure it again.
  50          */
  51         else
  52                 bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
  53 #endif
  54
  55         /* Save RETX so we can pass it while booting Linux */
  56         bfin_poweron_retx = bootflag;
  57
  58 #ifdef CONFIG_DEBUG_DUMP
  59         /* Turn on hardware trace buffer */
  60         bfin_write_TBUFCTL(TBUFPWR | TBUFEN);
  61 #endif
  62
  63 #ifndef CONFIG_PANIC_HANG
  64         /* Reset upon a double exception rather than just hanging.
  65          * Do not do bfin_read on SWRST as that will reset status bits.
  66          */
  67         bfin_write_SWRST(DOUBLE_FAULT);
  68 #endif
  69
  70         serial_early_puts("Board init flash\n");
  71         board_init_f(bootflag);
  72 }
  73
  74 int exception_init(void)
  75 {
  76         bfin_write_EVT3(trap);
  77         return 0;
  78 }
  79
  80 int irq_init(void)
  81 {
  82 #ifdef SIC_IMASK0
  83         bfin_write_SIC_IMASK0(0);
  84         bfin_write_SIC_IMASK1(0);
  85 # ifdef SIC_IMASK2
  86         bfin_write_SIC_IMASK2(0);
  87 # endif
  88 #elif defined(SICA_IMASK0)
  89         bfin_write_SICA_IMASK0(0);
  90         bfin_write_SICA_IMASK1(0);
  91 #else
  92         bfin_write_SIC_IMASK(0);
  93 #endif
  94         /* Set up a dummy NMI handler if needed.  */
  95         if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS || ANOMALY_05000219)
  96                 bfin_write_EVT2(evt_nmi);       /* NMI */
  97         bfin_write_EVT5(evt_default);   /* hardware error */
  98         bfin_write_EVT6(evt_default);   /* core timer */
  99         bfin_write_EVT7(evt_default);
 100         bfin_write_EVT8(evt_default);
 101         bfin_write_EVT9(evt_default);
 102         bfin_write_EVT10(evt_default);
 103         bfin_write_EVT11(evt_default);
 104         bfin_write_EVT12(evt_default);
 105         bfin_write_EVT13(evt_default);
 106         bfin_write_EVT14(evt_default);
 107         bfin_write_EVT15(evt_default);
 108         bfin_write_ILAT(0);
 109         CSYNC();
 110         /* enable hardware error irq */
 111         irq_flags = 0x3f;
 112         local_irq_enable();
 113         return 0;
 114 }