2 * Copyright 2007-2011 Freescale Semiconductor, Inc.
4 * (C) Copyright 2003 Motorola Inc.
5 * Modified by Xianghua Xiao, X.Xiao@motorola.com
8 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
10 * See file CREDITS for list of people who contributed to this
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 #include <asm/processor.h>
36 #include <asm/cache.h>
38 #include <asm/fsl_law.h>
39 #include <asm/fsl_serdes.h>
40 #include <asm/fsl_srio.h>
41 #include <linux/compiler.h>
43 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
48 #include "../../../../drivers/block/fsl_sata.h"
50 DECLARE_GLOBAL_DATA_PTR;
53 extern qe_iop_conf_t qe_iop_conf_tab[];
54 extern void qe_config_iopin(u8 port, u8 pin, int dir,
55 int open_drain, int assign);
56 extern void qe_init(uint qe_base);
57 extern void qe_reset(void);
59 static void config_qe_ioports(void)
62 int dir, open_drain, assign;
65 for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
66 port = qe_iop_conf_tab[i].port;
67 pin = qe_iop_conf_tab[i].pin;
68 dir = qe_iop_conf_tab[i].dir;
69 open_drain = qe_iop_conf_tab[i].open_drain;
70 assign = qe_iop_conf_tab[i].assign;
71 qe_config_iopin(port, pin, dir, open_drain, assign);
77 void config_8560_ioports (volatile ccsr_cpm_t * cpm)
81 for (portnum = 0; portnum < 4; portnum++) {
88 iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
89 iop_conf_t *eiopc = iopc + 32;
94 * index 0 refers to pin 31,
95 * index 31 refers to pin 0
97 while (iopc < eiopc) {
117 volatile ioport_t *iop = ioport_addr (cpm, portnum);
121 * the (somewhat confused) paragraph at the
122 * bottom of page 35-5 warns that there might
123 * be "unknown behaviour" when programming
124 * PSORx and PDIRx, if PPARx = 1, so I
125 * decided this meant I had to disable the
126 * dedicated function first, and enable it
130 iop->psor = (iop->psor & tpmsk) | psor;
131 iop->podr = (iop->podr & tpmsk) | podr;
132 iop->pdat = (iop->pdat & tpmsk) | pdat;
133 iop->pdir = (iop->pdir & tpmsk) | pdir;
140 #ifdef CONFIG_SYS_FSL_CPC
141 static void enable_cpc(void)
146 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
148 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
149 u32 cpccfg0 = in_be32(&cpc->cpccfg0);
150 size += CPC_CFG0_SZ_K(cpccfg0);
151 #ifdef CONFIG_RAMBOOT_PBL
152 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
153 /* find and disable LAW of SRAM */
154 struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
156 if (law.index == -1) {
157 printf("\nFatal error happened\n");
160 disable_law(law.index);
162 clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
163 out_be32(&cpc->cpccsr0, 0);
164 out_be32(&cpc->cpcsrcr0, 0);
168 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
169 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
171 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
172 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
175 out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
176 /* Read back to sync write */
177 in_be32(&cpc->cpccsr0);
181 printf("Corenet Platform Cache: %d KB enabled\n", size);
184 void invalidate_cpc(void)
187 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
189 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
190 /* skip CPC when it used as all SRAM */
191 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
193 /* Flash invalidate the CPC and clear all the locks */
194 out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
195 while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
201 #define invalidate_cpc()
202 #endif /* CONFIG_SYS_FSL_CPC */
205 * Breathe some life into the CPU...
207 * Set up the memory map
208 * initialize a bunch of registers
211 #ifdef CONFIG_FSL_CORENET
212 static void corenet_tb_init(void)
214 volatile ccsr_rcpm_t *rcpm =
215 (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
216 volatile ccsr_pic_t *pic =
217 (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
218 u32 whoami = in_be32(&pic->whoami);
220 /* Enable the timebase register for this core */
221 out_be32(&rcpm->ctbenrl, (1 << whoami));
225 void cpu_init_f (void)
227 extern void m8560_cpm_reset (void);
228 #ifdef CONFIG_SYS_DCSRBAR_PHYS
229 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
231 #if defined(CONFIG_SECURE_BOOT)
232 struct law_entry law;
234 #ifdef CONFIG_MPC8548
235 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
236 uint svr = get_svr();
239 * CPU2 errata workaround: A core hang possible while executing
240 * a msync instruction and a snoopable transaction from an I/O
241 * master tagged to make quick forward progress is present.
242 * Fixed in silicon rev 2.1.
244 if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
245 out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
251 #if defined(CONFIG_SECURE_BOOT)
252 /* Disable the LAW created for NOR flash by the PBI commands */
253 law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
255 disable_law(law.index);
259 config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
262 init_early_memctl_regs();
264 #if defined(CONFIG_CPM2)
268 /* Config QE ioports */
271 #if defined(CONFIG_FSL_DMA)
274 #ifdef CONFIG_FSL_CORENET
277 init_used_tlb_cams();
279 /* Invalidate the CPC before DDR gets enabled */
282 #ifdef CONFIG_SYS_DCSRBAR_PHYS
283 /* set DCSRCR so that DCSR space is 1G */
284 setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
285 in_be32(&gur->dcsrcr);
290 /* Implement a dummy function for those platforms w/o SERDES */
291 static void __fsl_serdes__init(void)
295 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
298 * Initialize L2 as cache.
300 * The newer 8548, etc, parts have twice as much cache, but
301 * use the same bit-encoding as the older 8555, etc, parts.
306 __maybe_unused u32 svr = get_svr();
307 #ifdef CONFIG_SYS_LBC_LCRR
308 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
311 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
312 defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
314 * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
315 * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
316 * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
318 if (SVR_SOC_VER(svr) != SVR_P4080 || SVR_MAJ(svr) < 3) {
320 mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
327 #if defined(CONFIG_L2_CACHE)
328 volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
329 volatile uint cache_ctl;
333 ver = SVR_SOC_VER(svr);
336 cache_ctl = l2cache->l2ctl;
338 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
339 if (cache_ctl & MPC85xx_L2CTL_L2E) {
340 /* Clear L2 SRAM memory-mapped base address */
341 out_be32(&l2cache->l2srbar0, 0x0);
342 out_be32(&l2cache->l2srbar1, 0x0);
344 /* set MBECCDIS=0, SBECCDIS=0 */
345 clrbits_be32(&l2cache->l2errdis,
346 (MPC85xx_L2ERRDIS_MBECC |
347 MPC85xx_L2ERRDIS_SBECC));
349 /* set L2E=0, L2SRAM=0 */
350 clrbits_be32(&l2cache->l2ctl,
352 MPC85xx_L2CTL_L2SRAM_ENTIRE));
356 l2siz_field = (cache_ctl >> 28) & 0x3;
358 switch (l2siz_field) {
360 printf(" unknown size (0x%08x)\n", cache_ctl);
364 if (ver == SVR_8540 || ver == SVR_8560 ||
365 ver == SVR_8541 || ver == SVR_8555) {
367 /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
368 cache_ctl = 0xc4000000;
371 cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
375 if (ver == SVR_8540 || ver == SVR_8560 ||
376 ver == SVR_8541 || ver == SVR_8555) {
378 /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
379 cache_ctl = 0xc8000000;
382 /* set L2E=1, L2I=1, & L2SRAM=0 */
383 cache_ctl = 0xc0000000;
388 /* set L2E=1, L2I=1, & L2SRAM=0 */
389 cache_ctl = 0xc0000000;
393 if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
394 puts("already enabled");
395 #if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
396 u32 l2srbar = l2cache->l2srbar0;
397 if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
398 && l2srbar >= CONFIG_SYS_FLASH_BASE) {
399 l2srbar = CONFIG_SYS_INIT_L2_ADDR;
400 l2cache->l2srbar0 = l2srbar;
401 printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
403 #endif /* CONFIG_SYS_INIT_L2_ADDR */
407 l2cache->l2ctl = cache_ctl; /* invalidate & enable */
411 #elif defined(CONFIG_BACKSIDE_L2_CACHE)
412 if (SVR_SOC_VER(svr) == SVR_P2040) {
417 u32 l2cfg0 = mfspr(SPRN_L2CFG0);
419 /* invalidate the L2 cache */
420 mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
421 while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
424 #ifdef CONFIG_SYS_CACHE_STASHING
425 /* set stash id to (coreID) * 2 + 32 + L2 (1) */
426 mtspr(SPRN_L2CSR1, (32 + 1));
429 /* enable the cache */
430 mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
432 if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
433 while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
435 printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
445 /* needs to be in ram since code uses global static vars */
448 #ifdef CONFIG_SYS_SRIO
450 #ifdef CONFIG_SRIOBOOT_MASTER
452 #ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
453 srio_boot_master_release_slave();
458 #if defined(CONFIG_MP)
462 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
465 p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
466 setbits_be32(p, 1 << (31 - 14));
470 #ifdef CONFIG_SYS_LBC_LCRR
472 * Modify the CLKDIV field of LCRR register to improve the writing
473 * speed for NOR flash.
475 clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
476 __raw_readl(&lbc->lcrr);
478 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
483 #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
485 ccsr_usb_phy_t *usb_phy1 =
486 (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
487 out_be32(&usb_phy1->usb_enable_override,
488 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
491 #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
493 ccsr_usb_phy_t *usb_phy2 =
494 (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
495 out_be32(&usb_phy2->usb_enable_override,
496 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
500 #ifdef CONFIG_FMAN_ENET
504 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
506 * For P1022/1013 Rev1.0 silicon, after power on SATA host
507 * controller is configured in legacy mode instead of the
508 * expected enterprise mode. Software needs to clear bit[28]
509 * of HControl register to change to enterprise mode from
510 * legacy mode. We assume that the controller is offline.
512 if (IS_SVR_REV(svr, 1, 0) &&
513 ((SVR_SOC_VER(svr) == SVR_P1022) ||
514 (SVR_SOC_VER(svr) == SVR_P1013))) {
517 /* first SATA controller */
518 reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR;
519 clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
521 /* second SATA controller */
522 reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR;
523 clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
531 extern void setup_ivors(void);
533 void arch_preboot_os(void)
538 * We are changing interrupt offsets and are about to boot the OS so
539 * we need to make sure we disable all async interrupts. EE is already
540 * disabled by the time we get called.
543 msr &= ~(MSR_ME|MSR_CE);
549 #if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
550 int sata_initialize(void)
552 if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
553 return __sata_initialize();
559 void cpu_secondary_init_r(void)
562 uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
563 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
565 size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
567 /* load QE firmware from NAND flash to DDR first */
568 ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
569 &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);
571 if (ret && ret == -EUCLEAN) {
572 printf ("NAND read for QE firmware at offset %x failed %d\n",
573 CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);