arch/x86/cpu/quark/quark.c

   1 /*
   2  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <mmc.h>
   9 #include <netdev.h>
  10 #include <phy.h>
  11 #include <asm/io.h>
  12 #include <asm/irq.h>
  13 #include <asm/pci.h>
  14 #include <asm/post.h>
  15 #include <asm/processor.h>
  16 #include <asm/arch/device.h>
  17 #include <asm/arch/msg_port.h>
  18 #include <asm/arch/quark.h>
  19
  20 static struct pci_device_id mmc_supported[] = {
  21         { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO },
  22 };
  23
  24 /*
  25  * TODO:
  26  *
  27  * This whole routine should be removed until we fully convert the ICH SPI
  28  * driver to DM and make use of DT to pass the bios control register offset
  29  */
  30 static void unprotect_spi_flash(void)
  31 {
  32         u32 bc;
  33
  34         qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, 0xd8, &bc);
  35         bc |= 0x1;      /* unprotect the flash */
  36         qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, 0xd8, bc);
  37 }
  38
  39 static void quark_setup_bars(void)
  40 {
  41         /* GPIO - D31:F0:R44h */
  42         qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA,
  43                                    CONFIG_GPIO_BASE | IO_BAR_EN);
  44
  45         /* ACPI PM1 Block - D31:F0:R48h */
  46         qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK,
  47                                    CONFIG_ACPI_PM1_BASE | IO_BAR_EN);
  48
  49         /* GPE0 - D31:F0:R4Ch */
  50         qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK,
  51                                    CONFIG_ACPI_GPE0_BASE | IO_BAR_EN);
  52
  53         /* WDT - D31:F0:R84h */
  54         qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA,
  55                                    CONFIG_WDT_BASE | IO_BAR_EN);
  56
  57         /* RCBA - D31:F0:RF0h */
  58         qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA,
  59                                    CONFIG_RCBA_BASE | MEM_BAR_EN);
  60
  61         /* ACPI P Block - Msg Port 04:R70h */
  62         msg_port_write(MSG_PORT_RMU, PBLK_BA,
  63                        CONFIG_ACPI_PBLK_BASE | IO_BAR_EN);
  64
  65         /* SPI DMA - Msg Port 04:R7Ah */
  66         msg_port_write(MSG_PORT_RMU, SPI_DMA_BA,
  67                        CONFIG_SPI_DMA_BASE | IO_BAR_EN);
  68
  69         /* PCIe ECAM */
  70         msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL,
  71                        CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
  72         msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG,
  73                        CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
  74 }
  75
  76 static void quark_enable_legacy_seg(void)
  77 {
  78         u32 hmisc2;
  79
  80         hmisc2 = msg_port_read(MSG_PORT_HOST_BRIDGE, HMISC2);
  81         hmisc2 |= (HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB);
  82         msg_port_write(MSG_PORT_HOST_BRIDGE, HMISC2, hmisc2);
  83 }
  84
  85 int arch_cpu_init(void)
  86 {
  87         struct pci_controller *hose;
  88         int ret;
  89
  90         post_code(POST_CPU_INIT);
  91 #ifdef CONFIG_SYS_X86_TSC_TIMER
  92         timer_set_base(rdtsc());
  93 #endif
  94
  95         ret = x86_cpu_init_f();
  96         if (ret)
  97                 return ret;
  98
  99         ret = pci_early_init_hose(&hose);
 100         if (ret)
 101                 return ret;
 102
 103         /*
 104          * Quark SoC has some non-standard BARs (excluding PCI standard BARs)
 105          * which need be initialized with suggested values
 106          */
 107         quark_setup_bars();
 108
 109         /* Turn on legacy segments (A/B/E/F) decode to system RAM */
 110         quark_enable_legacy_seg();
 111
 112         unprotect_spi_flash();
 113
 114         return 0;
 115 }
 116
 117 int print_cpuinfo(void)
 118 {
 119         post_code(POST_CPU_INFO);
 120         return default_print_cpuinfo();
 121 }
 122
 123 void reset_cpu(ulong addr)
 124 {
 125         /* cold reset */
 126         x86_full_reset();
 127 }
 128
 129 int cpu_mmc_init(bd_t *bis)
 130 {
 131         return pci_mmc_init("Quark SDHCI", mmc_supported,
 132                             ARRAY_SIZE(mmc_supported));
 133 }
 134
 135 int cpu_eth_init(bd_t *bis)
 136 {
 137         u32 base;
 138         int ret0, ret1;
 139
 140         qrk_pci_read_config_dword(QUARK_EMAC0, PCI_BASE_ADDRESS_0, &base);
 141         ret0 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
 142
 143         qrk_pci_read_config_dword(QUARK_EMAC1, PCI_BASE_ADDRESS_0, &base);
 144         ret1 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
 145
 146         if (ret0 < 0 && ret1 < 0)
 147                 return -1;
 148         else
 149                 return 0;
 150 }
 151
 152 void cpu_irq_init(void)
 153 {
 154         struct quark_rcba *rcba;
 155         u32 base;
 156
 157         qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
 158         base &= ~MEM_BAR_EN;
 159         rcba = (struct quark_rcba *)base;
 160
 161         /*
 162          * Route Quark PCI device interrupt pin to PIRQ
 163          *
 164          * Route device#23's INTA/B/C/D to PIRQA/B/C/D
 165          * Route device#20,21's INTA/B/C/D to PIRQE/F/G/H
 166          */
 167         writew(PIRQC, &rcba->rmu_ir);
 168         writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12),
 169                &rcba->d23_ir);
 170         writew(PIRQD, &rcba->core_ir);
 171         writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12),
 172                &rcba->d20d21_ir);
 173 }
 174
 175 int arch_misc_init(void)
 176 {
 177         return pirq_init();
 178 }