]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/x86/include/asm/sfi.h
x86: Add support for the Simple Firmware Interface (SFI)
[karo-tx-uboot.git] / arch / x86 / include / asm / sfi.h
1 /*
2  * Copyright(c) 2009 Intel Corporation. All rights reserved.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+        BSD-3-Clause
5  */
6
7 #ifndef _LINUX_SFI_H
8 #define _LINUX_SFI_H
9
10 #include <errno.h>
11 #include <linux/types.h>
12
13 /* Table signatures reserved by the SFI specification */
14 #define SFI_SIG_SYST            "SYST"
15 #define SFI_SIG_FREQ            "FREQ"
16 #define SFI_SIG_CPUS            "CPUS"
17 #define SFI_SIG_MTMR            "MTMR"
18 #define SFI_SIG_MRTC            "MRTC"
19 #define SFI_SIG_MMAP            "MMAP"
20 #define SFI_SIG_APIC            "APIC"
21 #define SFI_SIG_XSDT            "XSDT"
22 #define SFI_SIG_WAKE            "WAKE"
23 #define SFI_SIG_DEVS            "DEVS"
24 #define SFI_SIG_GPIO            "GPIO"
25
26 #define SFI_SIGNATURE_SIZE      4
27 #define SFI_OEM_ID_SIZE         6
28 #define SFI_OEM_TABLE_ID_SIZE   8
29
30 #define SFI_NAME_LEN            16
31 #define SFI_TABLE_MAX_ENTRIES   16
32
33 #define SFI_GET_NUM_ENTRIES(ptable, entry_type) \
34         ((ptable->header.len - sizeof(struct sfi_table_header)) / \
35         (sizeof(entry_type)))
36 /*
37  * Table structures must be byte-packed to match the SFI specification,
38  * as they are provided by the BIOS.
39  */
40 struct __packed sfi_table_header {
41         char    sig[SFI_SIGNATURE_SIZE];
42         u32     len;
43         u8      rev;
44         u8      csum;
45         char    oem_id[SFI_OEM_ID_SIZE];
46         char    oem_table_id[SFI_OEM_TABLE_ID_SIZE];
47 };
48
49 struct __packed sfi_table_simple {
50         struct sfi_table_header         header;
51         u64                             pentry[1];
52 };
53
54 /* Comply with UEFI spec 2.1 */
55 struct __packed sfi_mem_entry {
56         u32     type;
57         u64     phys_start;
58         u64     virt_start;
59         u64     pages;
60         u64     attrib;
61 };
62
63 struct __packed sfi_cpu_table_entry {
64         u32     apic_id;
65 };
66
67 struct __packed sfi_cstate_table_entry {
68         u32     hint;           /* MWAIT hint */
69         u32     latency;        /* latency in ms */
70 };
71
72 struct __packed sfi_apic_table_entry {
73         u64     phys_addr;      /* phy base addr for APIC reg */
74 };
75
76 struct __packed sfi_freq_table_entry {
77         u32     freq_mhz;       /* in MHZ */
78         u32     latency;        /* transition latency in ms */
79         u32     ctrl_val;       /* value to write to PERF_CTL */
80 };
81
82 struct __packed sfi_wake_table_entry {
83         u64     phys_addr;      /* pointer to where the wake vector locates */
84 };
85
86 struct __packed sfi_timer_table_entry {
87         u64     phys_addr;      /* phy base addr for the timer */
88         u32     freq_hz;        /* in HZ */
89         u32     irq;
90 };
91
92 struct __packed sfi_rtc_table_entry {
93         u64     phys_addr;      /* phy base addr for the RTC */
94         u32     irq;
95 };
96
97 struct __packed sfi_device_table_entry {
98         u8      type;           /* bus type, I2C, SPI or ...*/
99         u8      host_num;       /* attached to host 0, 1...*/
100         u16     addr;
101         u8      irq;
102         u32     max_freq;
103         char    name[SFI_NAME_LEN];
104 };
105
106 enum {
107         SFI_DEV_TYPE_SPI        = 0,
108         SFI_DEV_TYPE_I2C,
109         SFI_DEV_TYPE_UART,
110         SFI_DEV_TYPE_HSI,
111         SFI_DEV_TYPE_IPC,
112         SFI_DEV_TYPE_SD,
113 };
114
115 struct __packed sfi_gpio_table_entry {
116         char    controller_name[SFI_NAME_LEN];
117         u16     pin_no;
118         char    pin_name[SFI_NAME_LEN];
119 };
120
121 struct sfi_xsdt_header {
122         uint32_t oem_revision;
123         uint32_t creator_id;
124         uint32_t creator_revision;
125 };
126
127 typedef int (*sfi_table_handler) (struct sfi_table_header *table);
128
129 /**
130  * write_sfi_table() - Write Simple Firmware Interface tables
131  *
132  * @base:       Address to write table to
133  * @return address to use for the next table
134  */
135 u32 write_sfi_table(u32 base);
136
137 #endif /*_LINUX_SFI_H */