]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/AndesTech/adp-ag102/adp-ag102.c
Ka-Ro TX U-Boot Release 2012-10-24
[karo-tx-uboot.git] / board / AndesTech / adp-ag102 / adp-ag102.c
1 /*
2  * Copyright (C) 2011 Andes Technology Corporation
3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
5  *
6  * See file CREDITS for list of people who contributed to this
7  * project.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 2 of the License, or
12  * (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  */
23
24 #include <common.h>
25 #include <netdev.h>
26 #include <asm/io.h>
27
28 #include <faraday/ftsdc010.h>
29 #ifdef CONFIG_FTSMC020
30 #include <faraday/ftsmc020.h>
31 #endif
32
33 DECLARE_GLOBAL_DATA_PTR;
34
35 /*
36  * Miscellaneous platform dependent initializations
37  */
38
39 int board_init(void)
40 {
41         /*
42          * refer to BOOT_PARAMETER_PA_BASE within
43          * "linux/arch/nds32/include/asm/misc_spec.h"
44          */
45         gd->bd->bi_arch_number = MACH_TYPE_ADPAG102;
46         gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
47
48 #if !defined(CONFIG_SYS_NO_FLASH)
49         ftsmc020_init();        /* initialize Flash */
50 #endif /* CONFIG_SYS_NO_FLASH */
51         return 0;
52 }
53
54 int dram_init(void)
55 {
56         unsigned long sdram_base = PHYS_SDRAM_0;
57         unsigned long expected_size = PHYS_SDRAM_0_SIZE;
58         unsigned long actual_size;
59
60         actual_size = get_ram_size((void *)sdram_base, expected_size);
61
62         gd->ram_size = actual_size;
63
64         if (expected_size != actual_size) {
65                 printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
66                                 actual_size >> 20, expected_size >> 20);
67         }
68
69         return 0;
70 }
71
72 int board_eth_init(bd_t *bd)
73 {
74         return ftgmac100_initialize(bd);
75 }
76
77 #if !defined(CONFIG_SYS_NO_FLASH)
78 ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
79 {
80         if (banknum == 0) {     /* non-CFI boot flash */
81                 info->portwidth = FLASH_CFI_8BIT;
82                 info->chipwidth = FLASH_CFI_BY8;
83                 info->interface = FLASH_CFI_X8;
84                 return 1;
85         } else {
86                 return 0;
87         }
88 }
89 #endif /* CONFIG_SYS_NO_FLASH */
90
91 #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
92 void pci_init_board(void)
93 {
94         /* should be pci_ftpci100_init() */
95         extern void pci_ftpci_init();
96
97         pci_ftpci_init();
98 }
99 #endif
100
101 #ifdef CONFIG_GENERIC_MMC
102 int board_mmc_init(bd_t *bis)
103 {
104         ftsdc010_mmc_init(0);
105         return 0;
106 }
107 #endif