]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/actux2/actux2_hw.h
avr32:grasshopper: fix PHY initialisation
[karo-tx-uboot.git] / board / actux2 / actux2_hw.h
1 /*
2  * (C) Copyright 2007
3  * Michael Schwingen, michael@schwingen.org
4  *
5  * hardware register definitions for the AcTux-2 board.
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25
26 #ifndef _ACTUX2_HW_H
27 #define _ACTUX2_HW_H
28
29 /* 0 = LED off,1 = green, 2 = red, 3 = orange */
30 #define ACTUX2_LED1(a)  writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 0)
31 #define ACTUX2_LED2(a)  writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 1)
32 #define ACTUX2_LED3(a)  writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 2)
33 #define ACTUX2_LED4(a)  writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 3)
34
35 #define ACTUX2_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS
36 #define ACTUX2_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
37 #define ACTUX2_OPTION   (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0)
38
39 /*
40  * GPIO settings
41  */
42 #define CONFIG_SYS_GPIO_DBGINT                  0
43 #define CONFIG_SYS_GPIO_ETHINT                  1
44 #define CONFIG_SYS_GPIO_ETHRST                  2       /* Out */
45 #define CONFIG_SYS_GPIO_LED5_GN         3       /* Out */
46 #define CONFIG_SYS_GPIO_UNUSED4         4
47 #define CONFIG_SYS_GPIO_UNUSED5         5
48 #define CONFIG_SYS_GPIO_DSR                     6       /* Out */
49 #define CONFIG_SYS_GPIO_DCD                     7       /* Out */
50 #define CONFIG_SYS_GPIO_IPAC_INT                8
51 #define CONFIG_SYS_GPIO_DBGJUMPER               9
52 #define CONFIG_SYS_GPIO_BUTTON1         10
53 #define CONFIG_SYS_GPIO_DBGSENSE                11
54 #define CONFIG_SYS_GPIO_DTR                     12
55 #define CONFIG_SYS_GPIO_IORST                   13      /* Out */
56 #define CONFIG_SYS_GPIO_PCI_CLK         14      /* Out */
57 #define CONFIG_SYS_GPIO_EXTBUS_CLK              15      /* Out */
58
59 #endif