]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/atmel/atngw100/atngw100.c
avr32: convert to dram_init()
[karo-tx-uboot.git] / board / atmel / atngw100 / atngw100.c
1 /*
2  * Copyright (C) 2006 Atmel Corporation
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6 #include <common.h>
7
8 #include <asm/io.h>
9 #include <asm/sdram.h>
10 #include <asm/arch/clk.h>
11 #include <asm/arch/gpio.h>
12 #include <asm/arch/hmatrix.h>
13 #include <asm/arch/mmu.h>
14 #include <asm/arch/portmux.h>
15 #include <netdev.h>
16
17 DECLARE_GLOBAL_DATA_PTR;
18
19 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
20         {
21                 .virt_pgno      = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
22                 .nr_pages       = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
23                 .phys           = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
24                                         | MMU_VMR_CACHE_NONE,
25         }, {
26                 .virt_pgno      = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
27                 .nr_pages       = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
28                 .phys           = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
29                                         | MMU_VMR_CACHE_WRBACK,
30         },
31 };
32
33 static const struct sdram_config sdram_config = {
34         .data_bits      = SDRAM_DATA_16BIT,
35         .row_bits       = 13,
36         .col_bits       = 9,
37         .bank_bits      = 2,
38         .cas            = 3,
39         .twr            = 2,
40         .trc            = 7,
41         .trp            = 2,
42         .trcd           = 2,
43         .tras           = 5,
44         .txsr           = 5,
45         /* 7.81 us */
46         .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
47 };
48
49 int board_early_init_f(void)
50 {
51         /* Enable SDRAM in the EBI mux */
52         hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
53
54         portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
55         sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
56
57         portmux_enable_usart1(PORTMUX_DRIVE_MIN);
58
59 #if defined(CONFIG_MACB)
60         portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
61         portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
62 #endif
63 #if defined(CONFIG_MMC)
64         portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
65 #endif
66 #if defined(CONFIG_ATMEL_SPI)
67         portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW);
68 #endif
69
70         return 0;
71 }
72
73 int board_early_init_r(void)
74 {
75         gd->bd->bi_phy_id[0] = 0x01;
76         gd->bd->bi_phy_id[1] = 0x03;
77         return 0;
78 }
79
80 #ifdef CONFIG_CMD_NET
81 int board_eth_init(bd_t *bi)
82 {
83         macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
84         macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]);
85         return 0;
86 }
87 #endif
88
89 /* SPI chip select control */
90 #ifdef CONFIG_ATMEL_SPI
91 #include <spi.h>
92
93 #define ATNGW100_DATAFLASH_CS_PIN       GPIO_PIN_PA(3)
94
95 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
96 {
97         return bus == 0 && cs == 0;
98 }
99
100 void spi_cs_activate(struct spi_slave *slave)
101 {
102         gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0);
103 }
104
105 void spi_cs_deactivate(struct spi_slave *slave)
106 {
107         gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1);
108 }
109 #endif /* CONFIG_ATMEL_SPI */