board/congatec/cgtqmx6eval/cgtqmx6eval.c

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  * Based on mx6qsabrelite.c file
   4  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   5  * Leo Sartre, <lsartre@adeneo-embedded.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <asm/io.h>
  12 #include <asm/arch/clock.h>
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/arch/iomux.h>
  15 #include <asm/arch/mx6-pins.h>
  16 #include <asm/gpio.h>
  17 #include <asm/imx-common/iomux-v3.h>
  18 #include <asm/imx-common/boot_mode.h>
  19 #include <mmc.h>
  20 #include <fsl_esdhc.h>
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |\
  25         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  26
  27 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |\
  28         PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  29
  30 int dram_init(void)
  31 {
  32         gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
  33
  34         return 0;
  35 }
  36
  37 static iomux_v3_cfg_t const uart2_pads[] = {
  38         MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  39         MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  40 };
  41
  42 static iomux_v3_cfg_t const usdhc2_pads[] = {
  43         MX6_PAD_SD2_CLK__SD2_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  44         MX6_PAD_SD2_CMD__SD2_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  45         MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  46         MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  47         MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  48         MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  49         MX6_PAD_GPIO_4__GPIO1_IO04      | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  50 };
  51
  52 static iomux_v3_cfg_t const usdhc4_pads[] = {
  53         MX6_PAD_SD4_CLK__SD4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  54         MX6_PAD_SD4_CMD__SD4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  55         MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  56         MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  57         MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  58         MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  59         MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  60         MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  61         MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  62         MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  63         MX6_PAD_NANDF_D6__GPIO2_IO06, /* CD */
  64 };
  65
  66 static void setup_iomux_uart(void)
  67 {
  68         imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
  69 }
  70
  71 #ifdef CONFIG_FSL_ESDHC
  72 static struct fsl_esdhc_cfg usdhc_cfg[] = {
  73         {USDHC2_BASE_ADDR},
  74         {USDHC4_BASE_ADDR},
  75 };
  76
  77 int board_mmc_getcd(struct mmc *mmc)
  78 {
  79         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
  80         int ret = 0;
  81
  82         switch (cfg->esdhc_base) {
  83         case USDHC2_BASE_ADDR:
  84                 gpio_direction_input(IMX_GPIO_NR(1, 4));
  85                 ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
  86                 break;
  87         case USDHC4_BASE_ADDR:
  88                 gpio_direction_input(IMX_GPIO_NR(2, 6));
  89                 ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
  90                 break;
  91         default:
  92                 printf("Bad USDHC interface\n");
  93         }
  94
  95         return ret;
  96 }
  97
  98 int board_mmc_init(bd_t *bis)
  99 {
 100         s32 status = 0;
 101         int i;
 102
 103         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 104         usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 105
 106         imx_iomux_v3_setup_multiple_pads(
 107                                 usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
 108         imx_iomux_v3_setup_multiple_pads(
 109                                 usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
 110
 111         for (i = 0; i < ARRAY_SIZE(usdhc_cfg); i++) {
 112                 status = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
 113                 if (status)
 114                         return status;
 115         }
 116
 117         return 0;
 118 }
 119 #endif
 120
 121 int board_early_init_f(void)
 122 {
 123         setup_iomux_uart();
 124
 125         return 0;
 126 }
 127
 128 int board_init(void)
 129 {
 130         /* address of boot parameters */
 131         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 132
 133         return 0;
 134 }
 135
 136 int checkboard(void)
 137 {
 138         puts("Board: Conga-QEVAL QMX6 Quad\n");
 139
 140         return 0;
 141 }
 142
 143 #ifdef CONFIG_CMD_BMODE
 144 static const struct boot_mode board_boot_modes[] = {
 145         /* 4 bit bus width */
 146         {"mmc0",        MAKE_CFGVAL(0x50, 0x20, 0x00, 0x00)},
 147         {"mmc1",        MAKE_CFGVAL(0x50, 0x38, 0x00, 0x00)},
 148         {NULL,          0},
 149 };
 150 #endif
 151
 152 int misc_init_r(void)
 153 {
 154 #ifdef CONFIG_CMD_BMODE
 155         add_board_boot_modes(board_boot_modes);
 156 #endif
 157         return 0;
 158 }